When fuzzy skin is enabled, show more related settings
so that user can tune.
This is enhancement for github issue #44
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I35e3883983b62117c4306dd894a04edd40c70f8e
1. remove wireframe in 3d view, only keep in paint;
2. pass barycentric_coordinates from outside
3. add shortcut hints
Change-Id: I911e5cdf3475926d9527dc0839fdce072ed54746
(cherry picked from commit 6e16d0ccfb71741e55daabd757be9f9e7613e695)
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Some sentenses are only slightly different which is
unnecessary. Making them the same can save a
translation and also keep consistency.
Change-Id: Ie59c0bf788a31ee0c6a0d792af7b3d532fe34f75
(cherry picked from commit eb69195569518e3be61e5a8887ea317fbe3e7302)
Change-Id: I48f34039635803c3f1cee4cc2c853a0ffa5b451a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 387ba2a5aac05d3b3af0923f88415188ae8cb44e)
Signed-off-by: Stone Li <stone.li@bambulab.com>
Change-Id: I33794d1f7354f369e76b83e90c8a03d2c349b545
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit a5edb419b49b18e7fa94b05d14aa215ed756076c)
1. only turn on label while switch from by_layer to by_object
2. don't crash when filament_colours mismatch between project_config and PresetBundle
Change-Id: Icac9d0d7f88e17fcad3b042ea19cda3ac23ae62c
Also change words for extruder clearance parameters.
Change-Id: I736fd9049d184c140b33078d78f764b4fe172765
(cherry picked from commit e70c0c0ea133cffa5788efbfc9633332b196e8df)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
1. send to printer change to send to print sd card
2. update the default error message
3. display networking error messages on the page
Change-Id: I27b67091e9449bb9d469f9ded53148e0b1a74369
Revert "ENH: save uniform scale to an app_config item" Revert "ENH: do uniform scale if uniform_scale is true"
Change-Id: I069baecec143e77d796247f29cd5478b877971fb
(cherry picked from commit c7cf95cf5c365f314a53fead6612fac84a0a5f71)
1. fix the prefer_model issue
2. when a printer is visible and no filament is selected, just set its default materials to visible
3. add some log for shutdown debug
Change-Id: I599dbd9c8b180c944ff4086c7638267ff002f94a
