* Add "Manual filament change" option and logic
* make suggested changes
* make suggested changes
* change tag from "CHANGE_TOOL" to "MANUAL_TOOL_CHANGE"
* some tweaks
* More fixes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
* Change direction for perimeter extrusion at odd layers.
Initial test code based on supermerill/SuperSlicer@87245ae3c1
* Perimeters for both contours and holes can have alternating direction, to support overhangs on both side.
Also fixes wipe on loop.
* Only reverse order if the loops have steep overhang
* Support a special case that treat every layer as steep overhang
* Add options
* Disable overhang reverse if vase mode is enabled
* Allow extrusion reversal and skip overhang detection if fuzzy skin
---------
Co-authored-by: supermerill <merill@free.fr>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Initial port of the new ensure vertical thickness algorithm from PrusaSlicer.
Based on prusa3d/PrusaSlicer@1a0d8f5130
* Remove code related to "Detect narrow internal solid infill" as it's handled by the new ensuring code
* Support different internal solid infill pattern
* Ignore removed options
---------
Co-authored-by: Pavel Mikuš <pavel.mikus.mail@seznam.cz>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add needed src files and update CMake files
* Implementation of GCodeThumbnailsFormat for PNG, JPG, and QOI complete
* Implement BIQU (Big Tree Tech) Thumbnail Format
* have GCodeProcessor.post_process pass through original line end characters
* fix biqu thumbnail output
use \r\n for new lines in the biqu thumbnail portion. the firmware requires these end characters to function properly.
update names of variables and add comments to be more descriptive
replace modified Qt pixel algorithm with much simpler algorithm from BTT TFT firmware
* rename BiQU to BTT_TFT for better clarity
* remove underscore from GUI option
---------
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
1.Use json to store nozzle hrc
2.Use json to store filament temp type
jira: STUDIO-3488
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8eb226e26352a41418f4e46d8cda403dc22ecff4
(cherry picked from commit 62a71d5b1947474d3d86be9015551c1007c89702)
* Remove BambuLab's implementation of solid infill bridging enhancement
, will use Prusa's instead
* Port "Extend sparse infill" from Prusa
* Improve anchoring by shifting the lines half-spacing
* Add missing fill patterns
* Improve anchoring by keeping fine details
* Make sure the opposite directions do not cancel each other
---------
Co-authored-by: Pavel Mikus <pavel.mikus.mail@seznam.cz>
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
* Initial commit of code from Prusa Slicer 2.6.1
* Ported ExtrusionRole from Prusa Slicer 2.6.1
* fix compile errors
* Update GCode.hpp
* code changes to invoke pressure equalizer
* attempting to trigger pressure equalizer
(Not compiling)
* Update Fill.cpp
* Update Fill.cpp
* Pressure equaliser layer result update
* Further commits
* Merged PR https://github.com/prusa3d/PrusaSlicer/pull/9622
* First complete working version
* Update PressureEqualizer.cpp
* Implemented parameter in GUI
* Toggle fields according to compatibility
* Updated UI toggles between extrusion rate slope and arc fitting.
* Updated tooltip
* Introduced parameter smoothing segment length
This parameter influences the number of division a line will undergo in response to the requirement to adhere to the extrusion rate flow adjustment.
* Internal parameter and tool tip tweaking
* Parameter and tool tip tweaking
* Updated parameters and tooltip following testing.
* Sync PressureEq with latest PrusaSlicer
* Revert "Sync PressureEq with latest PrusaSlicer"
This reverts commit 131fb94c6bebe0a6abb3ca28d4a162aacbe75f40.
---------
Co-authored-by: MGunlogson <MGunlogson@users.noreply.github.com>
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id14f3d91171b81239b336ef879061c6de7d68edf
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Initial port of organic tree support from PrusaSlicer
* Port missing Organic support parameters from PrusaSlicer
* Update parameter naming
* Reorganize the `raft_first_layer_expansion` and `raft_first_layer_density` parameters as they are not only used by rafts
* Reset support style only in simple mode
* Sync latest update from PrusaSlicer & copyrights
* Fix organic tree support crash with invalid parameters
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
PrusaLink: Use PUT or POST based on information read during test connection (upload-by-put). If put - do additional GET for storage_list and let user to choose where to upload or show name if only 1 is possible. Allow PrusaLink for MK2.5 and MK2.5S.
PrusaConnect: New host type PrusaConnect inherited from PrusaLink class with filled host address, disabled http diggest. After upload read header information - status message and pass it to notification and Printhost upload dialog via events, this message can be shown as warning notification and is recieved in localized lang. Pass accept-language shortcut in upload header. 3 option to upload. (upload, to queue, to print)
Upload Notification: Showing status text, changes in text, not showing close button, Completed state on special call (not 100%) and other design changes.
Right panel: Open URL button.
split to 3 mode
not apply
all top surface
topmost surface
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id9bb1a6ded7414b2f093ac01e4ecb4b93057d022
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
