New config field for switching the support interface pattern between
default (rectilinear for non-soluble interface, concentric for soluble interface),
explicit rectilinear and explicit concentric.
Also the config layer was reworked a bit to reduce some switch statements
on ConfigOptionEnum<> templates.
Fixes [Request] Add optional perimeter to raft #756
Fixes First support layer does not stick to bed #2101
New parameters raft_first_layer_density and raft_first_layer_expansion
to influence the 1st layer of raft or support.
Fixes Allow to disable raft under support structures. #3772
Fixes raft is larger than necessary #2568
Fixes Supports on the build plate should have a solid bottom interface for better adhesion #1165
Changed the 1st layer infill to rectilinear even for soluble materials.
Fixes first layer of support for multi filament support oddly spaced #1445
Fixes Full Soluble Materials interfacing into Models + Soluble material noise on Bed #684
Based on pull request Experimental fuzzy skin mode #4611 by @etet100
and on CuraEngine implementation of perimeter fuzzyfication
void FffPolygonGenerator::processFuzzyWalls(SliceMeshStorage& mesh)
Fan speed will be ramped up linearly from zero at layer disable_fan_first_layers
to maximum at layer full_fan_speed_layer. full_fan_speed_layer will be
ignored if lower than disable_fan_first_layers, in which case
the fan will be running at maximum allowed speed at layer
disable_fan_first_layers + 1.;
WIP: The cooling PresetHints are likely not finalized yet.
Fixed some issues in internal anchors of the Adaptive Cubic infill.
The ugly and dangerous implicit casting operators in Line, MultiPoint,
Polyline and Polygon were made explicit.
with the following refactorings:
1) Removed the "printhost_slug" config from the Printer config
and from all the Printer config related spots.
2) "printhost_slug" renamed to "printhost_port". Slug sounds nasty.
3) Improved error reporting of RepetierHost class.
4) Refactored for the new "Physical Printers"
Following refactorings were done independently of the Repetier pull request:
1) Removed PrintHost static print config.
2) Clean-up after conversion of print host configuration
from Printer config to Physical Printer config.
3) Fixed some issues, where the Printer config was still queried for
host configuration. Vojtech believes that this should not happen
after the host configuration is converted to physical printers.
Vojtech still feels that more refactoring is needed in regard to porting
the host configuration from Printer profile to the new Physical Printer
profile.
https://github.com/prusa3d/PrusaSlicer/issues/1212
WIP: The hints do not rescale when switching the "usage" combo box.
The new g-code time estimator needs to be updated to not read
the machine limits if not enabled.
to help with detecting "not changed" event when taking
Undo/Redo snapshot or synchronizing with the back-end.
Converted layer height profile and supports / seam painted areas
to the same timestamp controlled structure.
This reverts commit 3d3e36ba8d.
The change is too risky just before the PrusaSlicer 2.2.0 final release
and the feature may need a bit of polishing before release.
