bc402d0792
ENH: update gcode for H2D
...
1.Update machine start gcode and layer change gcode
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I6ac431c8035ba1c6e66a9799f0e066f3930a9ee1
(cherry picked from commit 8317976ab0cea78d8a8323ecc28781ade2fcdd7c)
2025-09-21 13:47:51 +08:00
f18483825d
ENH: update gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I288be5ef52b15d448d218ae451ff07126b6504c7
(cherry picked from commit 8b92c7a2bcdb6463638c528e7c4a491ba19f1f51)
2025-09-21 13:47:50 +08:00
e59a11d539
ENH: update gcode for H2D again
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ibf732553c9a0351d996d397705a5ffdf7fd45918
(cherry picked from commit 01bb20345df514e1a67a8cf5c872d6ce28aa2d89)
2025-09-21 13:47:50 +08:00
5d95426cdd
ENH: update gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ia06c7ba8abec11bf760967fe0f5eb273fea4aab0
(cherry picked from commit 6f87589e76530ce9d48e8a23cfad7c62be50801a)
2025-09-21 13:47:50 +08:00
ed5111add8
ENH: set additional cooling fan spee to 100 for TPU
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ia60e407b4a7a6f6db76cdd12d86cc48ea4151d8f
(cherry picked from commit d15a9148999305d4c742c652c4f05a32e4dd6e0e)
2025-09-21 13:47:49 +08:00
7377d3ba9b
ENH: fix some mistakes in profiles
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ic760cbe7dcc3bde0038f0cb2569d631608b29b47
(cherry picked from commit 002137b8768922a23d11f01140f0a67d8df6faba)
2025-09-21 13:47:49 +08:00
291a5707df
ENH: add h2d in upward machines
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I4168311dd5e5779f1b3930c733c1b682a8c67fed
(cherry picked from commit 7e5b6c4274885ddf14f6797ee101f23d430a4adf)
2025-09-20 15:29:45 +08:00
c26266dfb6
Merge remote-tracking branch 'remote/main' into dev/h2d
...
# Conflicts:
# src/libslic3r/CMakeLists.txt
# src/slic3r/CMakeLists.txt
2025-09-20 13:10:10 +08:00
fa6a73ec5e
Update Anycubic Kobra 2 Neo machine profile fine tune end gcode ( #10742 )
...
- Reduced total amount of retraction as stock PTFE liner may not be able to take the heat. (7mm to 3mm)
- Added X Y to final G28 to avoid crashing into prints.
Co-authored-by: frawg <>
2025-09-19 23:54:41 +08:00
178c6092b4
Merge remote-tracking branch 'upstream/main' into dev/h2d
2025-09-18 17:24:07 +08:00
6e416a8fd4
ENH: update gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I069c988454658f06148f62607eef1bfa2a2d7106
(cherry picked from commit 35e4db07e99ca8df18bec2b7e924c1940307f8bd)
2025-09-18 17:18:13 +08:00
62a85019d3
ENH: update params in process profiles
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I167ed97df565256c592b56a2389985afbe24cbe3
(cherry picked from commit d9b9e41625c64839ed25dd9c07e659583cd6b586)
2025-09-18 17:16:33 +08:00
baa0a96383
ENH: update process profile for H2D
...
jira: none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I851852c36d5602ac3e97740ae357cadef6fa0903
(cherry picked from commit c7864db1c8d0180e977d5d769505c1dcea85119e)
2025-09-18 17:16:17 +08:00
7964fb1a63
ENH: update gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I98291af3fa439ac1b6f933f06112582edb9d9dc2
(cherry picked from commit eb24f6be0778944809ee9cda7416b3e486442897)
2025-09-18 17:14:58 +08:00
cc7c23716c
ENH: remove some profiles and do renaming
...
jira: none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I21d4915ec487b77c8e87afd49be2694ec32372e6
(cherry picked from commit 2e071908b6a8b66a6bf12710c6b9c7db0a5f594b)
2025-09-18 17:14:45 +08:00
10bb25065a
ENH: add high quality process profile
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I7e4f12e7a15b022c0dfb8cbefd4f13552e00d149
(cherry picked from commit 1ad2aed3a0979c6714d1f72cf1a3825aa15b7065)
2025-09-18 17:14:15 +08:00
0b4b39f8ed
ENH: update params for TPU FOR AMS H2D
...
JIRA: none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I96f46ac9773d952dd0163116eeee62a6772461b6
(cherry picked from commit a75a33a2c9dcf9bd6ffab1816fe2d8cf5812ed4b)
2025-09-18 17:07:57 +08:00
d8eb4ac24e
FIX: wrong inherits value in profiles
...
jira : NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I9ece8ee1d9fc8ba98efae591114d9eb4d79d182b
(cherry picked from commit 4b78554256f1a3003e9845e518c8fa2d6c0f917d)
2025-09-18 16:49:36 +08:00
4d90955007
ENH: add filament profiles for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Icff2b98c8fb4787bb637039d998659110897fd58
(cherry picked from commit 89ae8046c902c5fb9512c33ad1d8b43c98505b19)
2025-09-18 16:45:19 +08:00
9beeec9b83
ENH: update change filament gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I969a8158591b1f74c93bad7cf943e59fd879ecf2
(cherry picked from commit 6b70020068ee9566ec86a4a70c9736f788c01ffd)
2025-09-18 16:43:42 +08:00
05ba2c0428
ENH: remove invalid params in profile
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Iee2382235e6ac473a0dfcc60cfda18196139f334
(cherry picked from commit d45ba14b65f4c8485137d8bc54479e5b1368aae0)
2025-09-18 16:19:51 +08:00
862e6d211d
ENH: update gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I2c2d8b988932bc9c9ee71509f73c8d7e0107627d
(cherry picked from commit b952dffa60e05237a51f2cd8b7ee885f19ad4665)
2025-09-18 16:18:35 +08:00
5d768f27dc
ENH: update profiles for TPU 85A
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I27b5a6a555ca2c9f2666eb116343dc2be189bbc9
(cherry picked from commit 0c12fda23df6cdadcc67285b97cb9ff19d0f264b)
2025-09-18 16:15:19 +08:00
542ddebbc5
ENH: add bambu tpu 85a and 90a for a series
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I1975bd3421b4076d113a8f9000616a74efadbc03
(cherry picked from commit fb74c3362511ce363b7137e18345482a064c6831)
2025-09-18 16:13:17 +08:00
f787166025
ENH: update machine start gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I50bb4fc2378e4da1b7c788616bf3d4800dd410d0
(cherry picked from commit 4f16cefc3d21687906e2038aca4e3c53dc0e7e48)
2025-09-18 15:43:13 +08:00
5105f1d28b
ENH: Revert "ENH: remove bambu tpu 85a temperoraily"
...
This reverts commit 74f0c8a63c220d688b503bff87f927c94749eef9.
Reason for revert: <add back now>
jira: none
Change-Id: I07c42c264b820fdd5beff1556f6615b22e278b28
(cherry picked from commit cbaf4d9a12d3aaa3507038d93ee5ecee848f8088)
2025-09-18 15:39:28 +08:00
0b301bd971
ENH: update H2D start machine gcode
...
Jira: none
extrude 5 mm in place before drawing the pre-extrusion line
to ensure the filament stick to bed
add a dirty detection feature for carmera
support dual-head high-low temp check
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: Ia365d99fe764acf4815d24cfb96532b6f1d79990
(cherry picked from commit d17f5586103e4b87c8ae875846253658afb6e42d)
2025-09-18 15:22:55 +08:00
b5dadd160a
ENH: sync timelapse gcode for h2d
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I304410a6265e8ab4bb16435cb1c21f906c355e76
(cherry picked from commit 11ba41c7ab603424f52504b0f35564e10380e8c0)
2025-09-18 11:05:57 +08:00
959f6fe87c
ENH: update gcode for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Iea232e323b7859affe217d86f685db2d7e997a4d
(cherry picked from commit 05cc1ae808da253d1c3c074aa76921c6ba7ea195)
2025-09-18 11:05:45 +08:00
f850d397c9
ENH: add x1 in bambu pla Lite
...
1.Also modify max flow v
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I4dc196c452ed1f72119103adfa1e0567ecae4c9f
(cherry picked from commit c8ceb4ba38a591de822da27277a5f9f9d48347c2)
2025-09-17 23:31:50 +08:00
b3181c6c52
ENH: add profiles for Bambu PLA Lite
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I2072a34ee5614f702eced636e163e8d06eb07279
(cherry picked from commit 2581925e4b15888c42afa479a323f189e353d56a)
2025-09-17 23:30:27 +08:00
2c41b6e529
ENH:update image for plate type
...
jira: none
Change-Id: I590bf9d6596ccf5cd6e06844fb3ed247fa526ba6
(cherry picked from commit 6be306e548be9129d6cf1c34242910be02a70ed8)
2025-09-17 22:08:40 +08:00
91349fa6cd
ENH: update gcode for X1E
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I161e9c65c24c3e35d2edb026aa9790ce02d9aff7
(cherry picked from commit 5bd2ad1806ed5b66631483734481449ab7965af6)
2025-09-17 21:51:15 +08:00
44ebac591c
ENH: update params for Bambu PETG HF
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I2eee5275f14f2599aa434379555bee4d1c45f9aa
(cherry picked from commit 323aba74f3949e141c99c3ed4079979641905832)
2025-09-17 21:50:44 +08:00
b561599575
FIX: Speed is displayed incorrectly in GCodeview
...
jira: none
Change-Id: I15a801c73503c0a3ebda64838fc5f82a4d46458f
(cherry picked from commit 704a4a380cbd7f9ba01e7db26bd2a358ec8db6eb)
2025-09-17 17:59:10 +08:00
30f85ee495
ENH: update chamber temp for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Id41f610f5314c82cbebfaa93c9b81fe1f472dc5a
(cherry picked from commit f2e861af902f01a9ed6998e9ca5369c420ed7deb)
2025-09-17 17:53:05 +08:00
40346a62e9
ENH: update profiles for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I17defcdf2bc665442c2d7c3b9f1922b4b2fe7f4b
(cherry picked from commit 6781a874b5eaabdc7bac7920248d96464c0493a3)
2025-09-17 17:51:01 +08:00
8c6e7f3d40
ENH: handle legacy for ASA-Aero
...
1.Change ASA-Aero to ASA-AERO
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I49c4c31b9928e07b67b9893a4b204c2418089f17
(cherry picked from commit a13c47281693a57439cfef2bd312a35d6d74ac0a)
2025-09-17 17:36:23 +08:00
6895cbcc58
ENH: update gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I3de9ef68ef727d58adac5c6025e50d1fa318177b
(cherry picked from commit bc446854ff5d20c152a5858958c643e903081895)
2025-09-17 16:27:34 +08:00
bde94a6616
FIX: the timelapse gcode is not generated in spiral vase mode
...
jira: none
Change-Id: Ibb73fab7f51e5a81bd32b6e5df18a095f2aa30d3
(cherry picked from commit 22499a552e86f6f458706c3043915130b447de2c)
2025-09-17 16:27:22 +08:00
6f5ea725dc
ENH: add new way to set bed temperature
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I99a9f67e9b13b2137ad371b22cf0999ccf9c096d
(cherry picked from commit 69c2947daf66eb0a6732b1b980c9b87f597c8da7)
2025-09-17 16:22:05 +08:00
c8bf1cedcc
ENH: update profile for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Icd5c507c6e9db4a74f68389a9b7ac476679fcc5f
(cherry picked from commit 0f6d691597d77725d7a3a4a3ae34d010c5d1cb58)
2025-09-17 15:49:03 +08:00
c6b34b22dd
ENH: remove bambu tpu 85a temperoraily
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ie45b497ad5a838a45e819467944775ffaaf955fa
(cherry picked from commit 853f899500f1fa103dfd3078bf42e656af7d1a57)
2025-09-17 11:13:11 +08:00
022a67836d
ENH: add profiles for TPU 85A and 90A
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ica88ced8d2e0dbb1bdff0d4b80863bd98102ff16
(cherry picked from commit 8d10dcd046ebcb4d78962d7796ebec0d58776bc0)
2025-09-17 11:02:20 +08:00
58fda108a4
ENH: remove unused keys in profile
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ib54b300a3c10ec45acf4aa842c1162bad5bdb289
(cherry picked from commit ff37dbdf7969fc446ee2dec9db4f04983e62915c)
2025-09-17 10:28:04 +08:00
7779a2aaa9
ENH: modify filament config for petg hf and pla basic
...
jira: None
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I46528a07a9e1d3f7422106636b405022811d78e6
(cherry picked from commit fe9073696da03ed8c9fae2ab24d579477cea0e3d)
2025-09-17 10:21:15 +08:00
a0b5cdfbb2
ENH: generate framework for all layers
...
jira: none
Change-Id: I95f35ba45fe9f544c53bdf0c5a52a70bd45ee7a9
(cherry picked from commit 3e0b6eb2289eab383c6e616d37559b0c6619eca1)
2025-09-17 10:07:27 +08:00
68fc82097c
FIX: h2d do not support timelapse in sprial mode
...
jira:STUDIO-10402
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I5d012a4665bf5715d90fcb973a589d3a500ded13
(cherry picked from commit 82d13205d574039c9478a92114c07a505c26773d)
2025-09-17 09:46:18 +08:00
348f59ac67
ENH: update H2D filament retraction of matte
...
Jira: 9900
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: I9e8f962796b7301fff7c8ae4e74db548771bd14e
(cherry picked from commit 09c0b004cd4c0b3c97c550c4e5f9704c1d118020)
2025-09-17 09:27:38 +08:00
686825b584
FIX: missing gcode line caused by gcode GCodeEditor
...
In the original logic, the gcodeEditor did not parse gcode lines with
leading spaces. In recent changes, all leading spaces in gcode lines
were removed, causing all gcode to be parsed. However, some certain cmd
perform additional actions, leading to incorrect state recording. As a
result, based on the erroneous state, some gcode lines that should not
be deleted are being removed.
This logic needs to be optimized in the future.
jira:10357,10367
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: If34b9c3b2913768b824030685e0a36708ca3a5ca
(cherry picked from commit 16813aa46092343c70681f3145a4f402ff415042)
2025-09-17 09:07:07 +08:00
