Commented out fuzzy_skin_shape for now, the parameter may be used
in the future, but for now we don't want the parameter to be stored
into configuration files.
Based on pull request Experimental fuzzy skin mode #4611 by @etet100
and on CuraEngine implementation of perimeter fuzzyfication
void FffPolygonGenerator::processFuzzyWalls(SliceMeshStorage& mesh)
The issue was handling of the special "default_filament_profile" vector,
which is not being normalized in length to the number of extruders,
as this vector is being shown to the user at the Printer dependencies page,
and we don't want to present empty fields there, if the default filament
profile was not defined in the system preset.
Fan speed will be ramped up linearly from zero at layer disable_fan_first_layers
to maximum at layer full_fan_speed_layer. full_fan_speed_layer will be
ignored if lower than disable_fan_first_layers, in which case
the fan will be running at maximum allowed speed at layer
disable_fan_first_layers + 1.;
WIP: The cooling PresetHints are likely not finalized yet.
2) Activating the physical_printer_settings_id when loading from 3MF, AMF, GCode.
The physical printer is only activated if it references the printer_settings_id
loaded from the same file.
3) When loading the presets from 3MF, AMF, GCode, the "external" profiles
are no more created for profiles which differ from the local profiles
the loaded profiles reference. Instead, the referenced profile is activated
and modified with the loaded preset. If the referenced profile does not
exist, but the profile refers to a system profile with the "inherits"
fileds, the system profile is loaded and modified instead.
This works for all profiles with the exception of multi-extruder
printer with multiple filament profiles modified. In that case
the first modified filament profile will be loaded as modified,
while the other modified profiles will be loaded as "external".
This should fix
Physical printer + 3mf file, wrong preset used to generate gcode #5178
and possibly
https://github.com/prusa3d/PrusaSlicer/issues/5272
+ Fixed translation for the "Extruder n" category on the Printer Settings Tab
+ Fixed a crash, when scrolling inside Search imGui with some localization (e.t. Russion)
Fixed some issues in internal anchors of the Adaptive Cubic infill.
The ugly and dangerous implicit casting operators in Line, MultiPoint,
Polyline and Polygon were made explicit.
with the following refactorings:
1) Removed the "printhost_slug" config from the Printer config
and from all the Printer config related spots.
2) "printhost_slug" renamed to "printhost_port". Slug sounds nasty.
3) Improved error reporting of RepetierHost class.
4) Refactored for the new "Physical Printers"
Following refactorings were done independently of the Repetier pull request:
1) Removed PrintHost static print config.
2) Clean-up after conversion of print host configuration
from Printer config to Physical Printer config.
3) Fixed some issues, where the Printer config was still queried for
host configuration. Vojtech believes that this should not happen
after the host configuration is converted to physical printers.
Vojtech still feels that more refactoring is needed in regard to porting
the host configuration from Printer profile to the new Physical Printer
profile.
https://github.com/prusa3d/PrusaSlicer/issues/1212
WIP: The hints do not rescale when switching the "usage" combo box.
The new g-code time estimator needs to be updated to not read
the machine limits if not enabled.
