d68489c7d7
3mf export - Removed export of duplicated line into model config file
2021-01-27 12:26:46 +01:00
2e6138561a
missing ifdef
2021-01-27 11:43:48 +01:00
c02385b115
missing ifdef
2021-01-27 10:58:52 +01:00
fa2568a5e3
Check loading of blacklisted dlls and show warning dialog at startup. Also show these dlls in sysinfo dialog.
2021-01-27 10:40:38 +01:00
4f161607c7
Follow-up on dcec1fa74:
...
Commented out fuzzy_skin_shape for now, the parameter may be used
in the future, but for now we don't want the parameter to be stored
into configuration files.
2021-01-27 09:58:42 +01:00
dcec1fa749
Commented out fuzzy_skin_shape for now, the parameter may be used
...
in the future, but for now we don't want the parameter to be stored
into configuration files.
2021-01-27 09:36:39 +01:00
05f9910c8f
Fixes after merge.
2021-01-27 09:35:39 +01:00
7a6c038480
Refactoring of 3MF file export to use the new homebrewed miniz
...
streaming interface. This shall fix high memory consumption and
crashes when exporting extremely large 3MF files.
2021-01-27 09:18:17 +01:00
ef424ad101
miniz: mz_zip_writer_add_staged_data() writes in a single shot
2021-01-27 09:18:17 +01:00
e82c502a47
miniz: Improved the streaming write interface.
2021-01-27 09:18:17 +01:00
55c698feef
WIP: Exporting 3MFs through a streaming interface.
2021-01-27 09:18:16 +01:00
729298c408
PrusaResearch (Vojtech) homebrewed the following:
...
mz_zip_writer_add_staged_open(), mz_zip_writer_add_staged_data() and mz_zip_writer_add_staged_finish()
were derived from mz_zip_writer_add_read_buf_callback() by splitting it and passing a new
mz_zip_writer_staged_context between them.
2021-01-27 09:18:16 +01:00
708d14f5dc
#5541 - Fixed reload from disk after loading from 3mf
2021-01-27 08:19:42 +01:00
67500f13b1
Fix of #5202 - Fuzzy Search engine is too fuzzy
...
* changed evaluation coefficients inside fuzzy_match_recursive
* don't add markers to the labels before it's used in fuzzy_match_recursive
+ follow-up 78a3d8b63e
2021-01-26 21:33:22 +01:00
a0fc398141
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-26 13:57:57 +01:00
a897dd0504
Disabled tech ENABLE_GCODE_VIEWER_STATISTICS
2021-01-26 13:56:32 +01:00
9304defe7c
Tech ENABLE_UNSIGNED_SHORT_INDEX_BUFFER merged into tech ENABLE_SPLITTED_VERTEX_BUFFER
2021-01-26 13:32:27 +01:00
3533473256
Tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING merge into tech ENABLE_SPLITTED_VERTEX_BUFFER
2021-01-26 12:21:50 +01:00
85a7a3d5c5
Use prusaslicer_add_cmake_project on each cmake deps project
...
replace avrdude conf generation from C to CMake code
2021-01-26 10:17:51 +01:00
9ede830f66
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-26 10:10:23 +01:00
500c667d7a
Extended miniz with https://github.com/richgel999/miniz/pull/147
...
to support writing a file from a callback without knowing the file
size up front. See comments in src/miniz/README-Prusa.txt for potential
pitfalls.
2021-01-26 09:29:34 +01:00
4620402ab4
WIP: Initial Fuzzy Skin implementaiton #2010
...
Based on pull request Experimental fuzzy skin mode #4611 by @etet100
and on CuraEngine implementation of perimeter fuzzyfication
void FffPolygonGenerator::processFuzzyWalls(SliceMeshStorage& mesh)
2021-01-26 09:29:34 +01:00
79b7ccbb79
OSX specific, related to the wxWidgets 3.1.4: Fixed wrong UI-scaling
...
(wxWidgets 3.1.4 can binding of wxEVT_DPI_CHANGED now, so it was called msw_rescale() for most of the controls redundantly)
+ Fixed update of the DoubleSlider after changing of the system color
2021-01-22 21:44:15 +01:00
eef800b5c4
FIXME on ExPolygon::overlaps(), which should be commutative.
2021-01-22 15:32:45 +01:00
30f43974fb
ENABLE_GCODE_VIEWER_STATISTICS - GCodeViewer statistic dialog modified to not require extra frames render
2021-01-22 12:32:40 +01:00
97c31b2a34
ENABLE_SPLITTED_VERTEX_BUFFER - Re-enable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING after fixing it
2021-01-21 16:33:35 +01:00
0f8e7f3e8b
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-21 09:44:27 +01:00
56b378d766
Fixed visualization of point toolpaths, broken with daa0bbdb0c
2021-01-21 09:44:02 +01:00
59017a7dae
wxBitmapComboBox under OSX and wxComboBox under other platforms is used on Manipulation panel for coordinate space choice now.
...
+ Fix of warning on wxBitmap.SetWidth(): deleted meaningless from wxWidgets 3.0 code
2021-01-20 17:34:54 +01:00
5161643fc6
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-20 13:48:09 +01:00
ee40ab421a
ENABLE_SPLITTED_VERTEX_BUFFER - Use unsigned short indices buffers to render toolpaths and temporary disable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING which is causing artifacts
2021-01-20 13:47:48 +01:00
6d7d482ca1
Fix of Extrusion Width Percentge #4631
...
Fixed extrusion width validation logic in case the extrusion width
was specified wrt. layer height.
2021-01-20 11:03:52 +01:00
979dfe50b8
OSX specific, needed after update of Xcode to 12.2 with OSX SDK 11.1,
...
where we have issues with false positives of address sanitizer
https://github.com/google/sanitizers/wiki/AddressSanitizerContainerOverflow#false-positives
Setting ASAN_OPTIONS=detect_container_overflow=0 inside Info.plist
2021-01-20 09:21:16 +01:00
c506c15ed4
Manual merge of 4e586b8edabde1146c4013ca2437469a448315e2 from upsteam Slic3r,
...
fixing "percent first layer speed was not applied over autospeed." GH upstream Slic3r #2945
our GH issue First Layer Speed Percentage not applying (#5829 )
2021-01-19 16:50:24 +01:00
b7c8d6db9f
Bumped up minimum required OSX version from 10.9 to 10.10 due to
...
an update of wxWidgets, which do not compile cleanly on 10.9 without
further patching.
2021-01-19 15:59:29 +01:00
6d49bc1978
Follow-up to 2bc6679a62
...
Set the printer_technology field.
2021-01-19 15:35:27 +01:00
2bc6679a62
Partial revert of 1bffc2b99b
...
(deriving the printer technology from the merged configs).
2021-01-19 15:18:03 +01:00
56e7d83513
Implement exception rethrow for ui jobs
2021-01-19 15:01:20 +01:00
a5dc3c4b66
Bugfix: CLI slicer should slice in FDM mode when no printer_technology is provided.
...
This was broken between 2.2.0 and 2.3.0 (1bffc2b
2021-01-19 10:29:35 +01:00
5294a48ee8
Fix of prusa 2.3.0 crash with 0.25 nozzle #5825
...
Importing a config bundle as a config file was broken for
multi material FDM printers, where a different filament was active
for each extruder.
2021-01-19 09:58:14 +01:00
1efa129b67
Fix of #5619 - Copying Item with Printable Property
2021-01-18 15:19:02 +01:00
56d26ad491
ENABLE_SPLITTED_VERTEX_BUFFER - slightly faster indices buffers generation in GCodeViewer::load_toolpaths()
2021-01-18 13:55:45 +01:00
3a0aabb924
ENABLE_SPLITTED_VERTEX_BUFFER - small refactoring in GCodeViewer::load_toolpaths()
2021-01-18 11:37:23 +01:00
59cabc9712
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-18 09:59:26 +01:00
8f1bc02287
ENABLE_SPLITTED_VERTEX_BUFFER - fixed cracks in toolpaths when splitting vertex and index buffers
2021-01-18 09:59:05 +01:00
9a2310ae98
Fix of [prusa3d/PrusaSlicer] Remove unnecessary null pointer checks ( #5813 )
...
Don't use
if (ptr)
delete ptr;
call
delete ptr;
directly, it contains the test for null ptr.
2021-01-18 09:33:19 +01:00
59911e7c35
Slight improvement in Hilbert infill by using constexpr
2021-01-15 09:34:50 +01:00
63e666b8d6
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2021-01-14 12:51:38 +01:00
48877614e2
Fix of --scale-to-fit not accepting any input as valid ( #5772 )
...
Fixed parsing of Point3, fortunately Point3 was used at just a single
command line parameter, thus this was not a big deal.
2021-01-14 12:51:28 +01:00
f27032f603
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-14 11:38:22 +01:00
