and fix the nozzlechange's error cleanbox.
and fix some error in interface's nozzlechangle and toolchange.
jira: none
Change-Id: I2fd5c68d90506fcb8f01f09a8246dfb5838baef4
(cherry picked from commit 6c5b63db246a1f42e34225c5561fb8b0975da53b)
and reduce the toolchange speed if it occurs at the contact surface
jira: none
Change-Id: Ic238671366145bc7bff76d18d20c104a201a1f17
(cherry picked from commit fb9f9f41e618c5064032b85351363029307e209c)
and set the contact surfaces of different material types as solid,
and reduce the nozzlechange speed if it occurs at the contact surface,
and recuce the toolchange speed if it occurs at the contact surface.
jira: none
Change-Id: I884d60f4114544dfa959bd654ecc985f5fb9aac4
(cherry picked from commit ed7bfd3ff6732efe6c7e9eb96901be1db00bb3d0)
1. the nozzle change gcode use double perimeter width
2. fix the error layer height for adaptive layer height
3. limit the nozzle change speed to 50 when a bridge is detected
4. fix the error extrusion flow for filament change gcode when a bridge is detected
jira: STUDIO-10269
Change-Id: I580c618555fe19d000a56e2510a42004722c1b8b
(cherry picked from commit 5c56b43166ab32b09da31b7046efbbcbe3cbc9c8)
of the wipe tower's outer wall to use the actual outer wall path.
jira: none
Change-Id: Ib45ecbc328c88c1abe6d9e8567f715331a3ddd37
(cherry picked from commit 0a20f1fe6d6d63cdcb13bc19fd9ae553f45b6f59)
and fix wipe error when enable timelapse and in single color
and set rib wall as default
jira: none
Change-Id: Ic365bb7ee0ee6715c9d4f4f00b4bca9fd472c61a
(cherry picked from commit 89b59f1c41e0f360457622438a09237bfa1eaa18)
and reduce the travel speed inside the wipe_tower
jira: none
Change-Id: I3b07ee62623e0cdc2f1824f0011f95776020bee1
(cherry picked from commit 1aad582e08229fad1f935e257c1335dcfdbe406c)
when enable timelapse_print without toolchange;
jira: none
Change-Id: I4c89acc70ee122c0ad504d97c003ebb4016567d1
(cherry picked from commit 6350ebf9b651a933ab8a9030da9cdf9b1608cff0)
1.Add automatic calculation of the wipe_tower's brim width by height；
2.modify the min_depth_per_height and the default ridwidth
jira: none
Change-Id: Idd96bc90e8e631aa8481b559e1e9fec24c6b822f
(cherry picked from commit 4dd4e9e12c02d945a0ac3fd2020f75313c5b2cc9)
1. the error start position after filament change
2. the error wall depth print with tpu
jira: none
Change-Id: I26d4e1c5c5c3bcae14555f9a875485435cdd6b97
(cherry picked from commit 753e2ac70870b43d52fa28437b9cc3cc0e174624)
and and modify the start position for tpu
jira: none
Change-Id: I75b09e7839ddd3b9fffe77392e573e1d8caa00d5
(cherry picked from commit fce47aa8cb59fb718ff30a7c7eebda30fc83119d)
and modify the path of travel to the wipe_tower after flushing
jira:none
Change-Id: Id4b0571fd12372c59cf522c13e256c7cc4ac3565
(cherry picked from commit 17771d0fbf753dd22411ce490586958bd643264e)
and modify the min_depth_per_height
jira: none
Change-Id: I4860df661b4dd1f66677112d14e60560bc4a73be
(cherry picked from commit 00810d685d01a91b5373f3315413aaef1fe49cbc)
1. modify the start position of wall
2. modify the overlap of wall and infill
3. print wall first
jira:none
Change-Id: I1b3f4a8cb198f84b81aba638cc722dedf84a164c
(cherry picked from commit 50b3d0097e8d4e7c4c112c75a757d25c929a038c)
and set 1/4 max_volumetic_speed for TPU
jira: none
Change-Id: I492ce178a88fb702fc051f8a0abec6a4b5706d00
(cherry picked from commit c1dec339dd7b5f9e70d3a9c132654aa589085757)
and modify the overlap of wall and infill for wipe tower
jira:none
Change-Id: I0d1355c718e2bd1efea6d898f793f5869476ab12
(cherry picked from commit 4db196b11f052d6a7a7c7a8aafe0d2b34a7d2d80)
