* feat: Add check for obsolete keys in filament profiles and improve error handling
* feat: Enhance error handling in machine profile checks and filament name consistency
* feat: Add option to check for obsolete keys in profile validation
* feat: Clarify help message for obsolete keys check in filament profiles
* BASE
* precise wall and z moved
* PolyHoles
* Arc-fitting
* X-Y Compensation
* Elephant foot + moved images
* Update quality_settings_precision.md
* Wall generator and more
* Full Reorder
* TPMS-D bases
* Update strength_settings_infill.md
* Image Fix + Infill desc calculator
* Descriptions + image fix
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Update cornering-calib.md
* minor fixes
* Wip updated
* Missing fills
* Update infill_desc_calculator.xlsx
* Update infill_desc_calculator.xlsx
* Update infill documentation and images
Removed outdated 'iso' infill images and updated 'top' infill images with new versions. Added new images for adaptive cubic and 2D honeycomb infill patterns. Updated strength_settings_infill.md to revise infill strength values, descriptions, and remove references to deleted images. Introduced documentation for 2D honeycomb infill and made minor corrections and clarifications throughout.
* Revise infill pattern documentation and add comparison table
Updated strength_settings_infill.md to clarify infill density calculation, add a comprehensive comparison table of infill patterns, and standardize terminology for strength and print time. Expanded pattern descriptions to use qualitative strength ratings instead of numeric values. Updated infill_desc_calculator.xlsx to reflect these changes.
* Indentation in code examples
Adjusted the indentation of code blocks in the cornering calibration documentation for clarity and consistency with the rest of the document.
* Update 3D Honeycomb infill strength ratings
Adjusted the horizontal strength rating for 3D Honeycomb infill from 'Normal' to 'Normal-High' in the strength settings documentation and table. Updated the infill_desc_calculator.xlsx file to reflect these changes.
* Formatting and fix in ERS documentation
Updated headings to use consistent Markdown syntax, improved clarity in explanations, and reworded references for better readability.
* Fix wall generator doc link and filename
Updated the Home.md to reference the correct 'quality_settings_wall_generator' section and renamed the corresponding documentation file for consistency.
---------
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
* remove OSMesa
OSMesa is depricated for quite a while and got removed with Mesa 25.1.0
* remove OSMesa from all buildfiles, readmes, etc…
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* fixes and refactors linux build scripts
- build_linux.sh: fixes wrong AppImage build folder; refactors script; enhances help text
- harmonizes names: BuildLinux.sh and BuildLinuxImage.sh
- fixes file permissions: cmake inherits .in-file permission; removes chmod 755 in scripts
- linux.d/debian: removes false positive error message
- updates documentation
* enables ANSI-colored output for GNU or Clang
* build_linux.sh: adds -p flag to disable PCH for boosting ccache hit rate
* Allow compilation on distributions based on Ubuntu/Debian (#8625)
* build_linux.sh: takes over changes from BuildLinux.sh
* CMakeLists.txt: removes leftovers, enables ANSI-colored output
* CMakeLists.txt: fixes issue where FORCE_COLORED_OUTPUT was not respected form environment (introduces -C cli arg)
* merges 5df4275: Make it easy to pass extra build args to deps and orca in BuildLinux.sh (#9648)
* chore: update how to build doc
* chore: add how to validate profiles doc
* remove old build info from readme.md
* fix: typo
* fix: typo
* chore: minor fix
* fix: typo
* chore: minor fix
* chore: minor fix
* chore: remove lfs
* fix: note 2 procedure for repair build
* fix: update CMake installation instructions for macOS to specify version 3.31.x
* fix: clarify CMake installation instructions for macOS and remove outdated commands
* fix: enhance documentation for profile structure and templates in OrcaSlicer
* fix: update profile validation documentation and remove obsolete guide
* chore: update path for building on mac
IS Calib - Use default Filament MVS
To fix#9439 added a comment in wiki and remove Max Volumetric Speed overload.
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
* Junction Deviation Machine Limit
jd 3
JD menu 2
JD operativo
limpieza
final
* default JD print menu without warnings
* to fix multiple instances
* Only at first layer
* Calibs upgrade
* Shown on Marlin2
Shown on Marlin2
CodeCleaning
* Update Calibration.md
* set on writer
---------
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* VFA-Calibs Wiki images
* Calib Code Fixes
Improve Settings
JD Set Precision to 3
Change damp default
Recommend 0
Fixes
* IS JD Wiki
* Updated with 9234
* IS Verbose
New important message due to flow ratio test changes. Afaik wasn't doced somewhere. I made the mistake if thinking the yolo tests followed the same formula as pass 1/2.
* Wiki home page fix links and readme update to link to wiki
* Update README.md
* Fixed developer reference links
* Update linkage from slicer settings to Wiki for layer height, line width and seam settings
* adaptive PA documentation
* Update adaptive-pressure-advance.md
* updated screenshots
* formatting
* Update adaptive-pressure-advance.md
* Update adaptive-pressure-advance.md
* Update adaptive-pressure-advance.md
* Include adaptive PA link
* creating settings for printer and some UI changes work
* related filament diameter and pellet flow changes to each other
* UI name change to turn Filament to Material
* updated the flow coefficient to filament diameter formula
* updated the preset for the configuration wizard
* configuration changes for the final release
* config changes and preset bundle sync removed
* start gcode change for ginger machines
* added explanation of relationship between pellet_flow_coefficient and filament_diameter
* Added tooltip. Fixed Ginger machine configuration, Added docs
Fix value passed to SPEED
The SPEED parameter of SET_FAN_SPEED needs to be between 0.0 and 1.0. Since the S param, which is between 0 and 255, was being passed as is to SPEED, it effectively resulted in the target fan running at 100% if any value > 0 was passed to M106.
