1. Changed printing speed for all PA tests, where the speed will be calculated by max(100, outer_wall_speed) with consideration of max_volumetric_speed.
2. PA tower now uses the classic wall generator.
#1616
* First working conical overhang impl
* Add settings for Make overhang printable
* Added an Advanced setting to the Quality menu for Make overhang printable
* Allow toggling the feature and adjusting the angle threshold
* Retain recesses in the bottom of the model when "Make Overhangs Printable" is turned on
* Add settings for Make overhang printable hole size
* Allow disabling conical overhang per modifier
* Should check upper layer instead
* Skip unnecessary layers
* Apply conical overhang before any size compensation
which fixs the `lslices` not being updated issue and also the elephant foot compensation
* 1. Fix an issue that changing make_overhang_printable related parameters won't clear caches properly.
2. Tweak the logic of make_overhang_printable parameter so that it works for per region/object/print level. Remove make_overhang_printable_disable parameter.
* Change default make_overhang_printable_angle to 55
* One more missing commit
* 1. Skip checking default_region_config()->make_overhang_printable
2. Handle make_overhang_printable_angle and make_overhang_printable_hole_size value change
---------
Co-authored-by: David Bern <odie5533@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Port single wall on top surface from classic wall generator to Arachne
* Move the surface split code into a separate function to be shared between classic and Arachne. This also adds bridge detection to Arachne as well.
* Remove unwanted infills
* Fix insets calculating
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Calculate extrusion width %s as a function of nozzle width, not layer height
* handled more width conversions
* more missing percent handling
* even more missed percent handling
* even more more extrusion % handling
* some fixes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
[BUGFIX] Fix Klipper SET_VELOCITY_LIMIT code
- Always write out SET_VELOCITY_LIMTIT ACCEL=<acceleration> independently of the accel_to_decel setting
- Append the ACCEL_TO_DECEL fragment if enabled in config
* Added config options for Enforce Lift Z (from SS, doesn't affect Gcode
yet)
* working, minus first layer override; also fixed m_last_extrusion_role not being set
* fixed logic to match SS
* minimize to just one config
* removed first layer override
* Cleaned up logic, working as intended
* added lift above z, lift below z; somehow broke filament overrides
* fixed overrides not working, but lift above/below and enforce don't override
* fixed filament overrides
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add pattern method to Pressure Advance dialog
* Convert calib_pressure_advance to more unique calib_pressure_advance_line
* Share move_to function with PA lines and patterns
* Add PA pattern to calib.hpp
* Implement move_to(Vec3d). Combine with Vec2d version
* Add call to PA pattern in GCode.cpp
* Add helper functions
* Add directionality to draw_digit
* Extract shared number drawing variables
* Extract convert_number_to_string function
* Use in-class initializers for pattern variables
* Add max_numbering_height function
* Add helper functions
* Extract shared delta helper functions
* Add pattern generate_test() and associated helpers
* Clarify use of math functions
* Remove unused move_to overload, accept move_to comments
* Add get_distance() and draw_line()
* Extract set_nozzle_diameter()
* Clean up and simplify
* Rearrange and clean up
* Start work on print_pa_pattern
* Complete basic draw_box function
* Add more helper functions
* Add struct for pattern config, more helpers
* Rearrange
* Add encroachment member variable
* Add structs to manage optional arguments
* Simplify optional arguments structs
* Update opt args usage. Finish draw_box function
* Complete print_pa_pattern function
* Reuse PA Line STL
* Fix forward declaration error
* Fix invalid comparison
* Fixing complier errors
* Make DrawDigitMode options more clear
* More compilation error fixes
* Yet more compile error fixes
* Fix incorrect default step value
* Handle top-level dialog changes, consolidate params definitions
* Add layer change G-code, set more print variables
* Simplify optArgs constructors
* Fix pattern drawing, minor misc. clean up
* Make draw_box() G-code comments more helpful
* Make more of draw_line() const
* Fix sequential number draw direction
* Extract shared e_per_mm function
* Fix misplaced decimal in PA Line
* Move short constructor into .hpp
* Fix inverted Y direction in pattern digit drawing
* Use placeholder STL to create needed layers
* Rearrange and clean up
* Proof of concept: Adding custom G-Code at layer
* Use new scaling method
* Reorganize Plater::calib_pa()
* Restructure calib
* New strategy for adding custom G-code
* Remove redundant invocation
* Use cube primitive as positioning handle
* Move logic to Plater
Modifications to model in GCode cancelled _do_export from within itself
* Consolidate m_starting_point and pattern_start functions
* Replace bed_center() with m_starting_point
* Fix and consolidate number tab creation
* Fix off by one layer bug
* Use correct bounding box
* Use Vec3d instead of Vec2d for m_starting_point and m_last_pos
* Add translate_starting_point function
* Vec3d fix
* Store CalibPressureAdvancePattern with model
* Formatting adjustments
* Move pattern when handle moves
* Improve const correctness
* Improve/fix pattern writer and config
* Fix speed setting bug
* Pass model into generate_gcodes to improve consistency
* Re-generate pattern on reslice
* Make pattern actually move with handle
* Fix overzealous m_last_pos initialization
* Use clearer function names
* Use correct model
* Remove unused member variable
* Don't hard-code print config settings
* Remove unused lines, formatting clean up
* Make sure set_key_value operates on existing keys
* Remove asserts which limited life of key/value set
* Update Calibration.md
* Update licensing info
* Actually use speed in draw_line
* Don't speed_adjust twice
* doc: Make width and speed settings used more clear
* Bugfix: Shouldn't need to move handle to see pattern
* Clean up
* Move mp_gcodegen into line method alone
* Fix wrong number thickness in PA Line
* Remove unnecessary middleman PatternSettings
* Give value of config to const m_initial_config, not ref
* Fix incorrect DrawBoxOptArg default
* Use line_width_anchor() for all of initial layer
* Use clearer function name
* Replace "anchor" with "first_layer" for better consistency
* Update Calibration.md
* Update Calibration.md
* Make number tab infill explanation more clear
* (Hopefully) fix missing origin
* Add GCodeProcessor tags
* Fully refresh config
* Don't store is_bbl_printer
* Move set_starting_point to private
* Don't constantly recreate GCodeWriter
* Use different step value for pattern test
* Remove redundant processor tags
* Label glyph G-code
* Fix comparison typo
* Set number print speed
* Fix mixed up draw_number parameter
* Don't use line_width_first_layer for pattern
* (Hopefully) fix temp tower generating PA pattern
* Start with pattern centered on plate
* Add gap between pattern and handle
* Fix overly persistent pattern
* Revert "(Hopefully) fix temp tower generating PA pattern"
This reverts commit 0aa1206886d57820799beaf62dc28b9b8e02545b.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
while the newer version of 3mf be load to older software
pressure_advance be unrecogized
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie160759f58e573f8ad01a2941763016e9b070e9e
Probabilistic errors occur during the calibration process, resulting in the inability to continue the flow rate calibration
Change-Id: I132b08755383f358c5573610a51f91aacf912ca9
1. check the flow rate save name valid
2. fix the crash when saving with Chinese symbols
3. handle the display of Chinese symbols
Change-Id: I3abe99ba17b2cc5893431d48de11a9597bf489a6
fix the issue of deleting plate name after entering some character
Change-Id: I572a922b05b3f5e83ad956a7b4fb197430f13df5
(cherry picked from commit bfb5f58e1d29a6f518915882736453fe425ad984)
