above the solid infill. Should fix
first layer of vase (after bottom layers) is bulging (0.6nozzle, 0.4 layerhight) #3712
Adjust flow of the "second" layer in spiral vase mode #2795
The thread local storage variables for the random number generator
were replaced by an external context variable.
Thread local storage is a scarce resource.
1) The macro-processor sanitizes the source code line for invalid UTF-8
characters. Ideally these invalid characters would be replaced with ?,
they are just dropped as of now. Better than showing an empty string
when converting to wxString though.
2) G-code export collects full error message for 1st occurence of an error
for each custom G-code block.
3) The composite error message now displays the errors collected in 2).
4) The error window is now scaled bigger and the Slicer logo is smaller
if the text is to be rendered with monospaced font, as the monospaced
text will not be word wrapped.
Errors in the file output templates are reported in mono-spaced font,
so that the arrow character ^ is displayed at the right column
pointing to the offending spot.
In addition to an existing "layer_z" placeholder variable,
a new "max_layer_z" has been added to custom G-code sections accumulating
maximum of "layer_z" over the print. This value may be used for example
in the end G-code of a sequential print to lift the print head
up before travel over the whole print bed.
with the following refactorings:
1) Removed the "printhost_slug" config from the Printer config
and from all the Printer config related spots.
2) "printhost_slug" renamed to "printhost_port". Slug sounds nasty.
3) Improved error reporting of RepetierHost class.
4) Refactored for the new "Physical Printers"
Following refactorings were done independently of the Repetier pull request:
1) Removed PrintHost static print config.
2) Clean-up after conversion of print host configuration
from Printer config to Physical Printer config.
3) Fixed some issues, where the Printer config was still queried for
host configuration. Vojtech believes that this should not happen
after the host configuration is converted to physical printers.
Vojtech still feels that more refactoring is needed in regard to porting
the host configuration from Printer profile to the new Physical Printer
profile.
https://github.com/prusa3d/PrusaSlicer/issues/1212
WIP: The hints do not rescale when switching the "usage" combo box.
The new g-code time estimator needs to be updated to not read
the machine limits if not enabled.
Wiping moves performed before moving away from the wipe tower were replaced by
scheduling a regular wipe that is performed after normal gcode generator regains
control. This makes it consistent with wipes on the model and gets rid of the
unretracted wipes.
