afcc6bbb08
Code refactoring for Color change implementation
2019-12-17 08:37:50 +01:00
bc68b8eaf2
ExtruderSequenceDialog :
...
Fixed layouts after the second opening of the dialog.
(Removing any extruder from the sequence does not cause an incorrect layout)
Validation of entered values added
(0 is not a valid value)
2019-11-16 02:12:37 +01:00
88514eeb0e
Merge branch 'lm_low_wipe_tower'
2019-11-14 10:37:04 +01:00
6c8bb51f4a
Use constant names for G-codes like M600, M601 and "tool_change"(Change extruder)
2019-11-11 09:38:45 +01:00
49175c3112
Merge remote-tracking branch 'origin/master' into ys_resin_cost
2019-11-08 19:33:18 +01:00
3321ae7f13
+ add FlashAir support for host upload
2019-11-04 12:53:48 +01:00
69c8b1cd21
new cheaper constructor for DynamicPrintConfig from FullPrintConfig:
...
DynamicPrintConfig::full_print_config()
new cheaper constructors of DynamicConfig / DynamicPrintConfig from ConfigBase
Unit tests: ported test_model from upstream Slic3r, thanks @lordofhyphens
Unit tests refactored to use less autos and initializer lists for readibility,
DynamicPrintConfig is handled by value, not by shared pointer.
2019-10-16 11:16:50 +02:00
1964ac2e89
Ported test_skirt_brim from upstream Slic3r, thanks @lordofhyphens
2019-10-15 16:31:20 +02:00
fd6d32135b
Merge branch 'master' into materials
2019-10-07 17:23:37 +02:00
e675a5d5c6
Reworked pad creation algorithm with new parameters:
...
* brim size
* force pad around object everywhere
2019-10-01 14:58:37 +02:00
82bc243281
Implemented possibility to set a resin cost
2019-09-26 16:36:31 +02:00
abaebb489a
Added a config option to not print sparse layers on the wipe tower
2019-09-20 10:54:20 +02:00
270008a3fd
Add material_type config option for SLA materials, use in Wizard
2019-09-17 13:20:06 +02:00
d146a0237e
WIP: Reworked the infill generator to merge areas with the same
...
properties.
Note for Vojtech:
Review src/libslic3r/Fill/Fill.cpp once again,
add test for G-code generator properties (extrusion speed, cooling?)
Fixes Modifier slice/move efficiency #1005
2019-09-04 16:11:16 +02:00
942f959e87
Fixed couple of warnings
...
Turned several includes into forward declarations
Removed several sprintf calls in favor of std::to_string
2019-09-02 16:27:48 +02:00
c2b9980488
Mirror pad_around_object for 'Pad' page on 'Supports' page
2019-08-28 11:33:04 +02:00
b58713c06f
SLA exposure bounds to printer params.
2019-08-20 17:24:48 +02:00
7c94db0634
Adding new sla material parameters: (initial) exposition min/max
2019-08-20 15:49:32 +02:00
3c09473f2a
Added additional checkbox to enable zero elevation
2019-08-06 16:51:32 +02:00
f8218eb903
Reworked the FFF Print::update() to process the filament retract
...
override values and to store them into the output G-code.
2019-07-25 14:39:19 +02:00
ab7ecc1819
Merge remote-tracking branch 'remotes/origin/vb_undo_redo'
2019-07-15 11:34:18 +02:00
a710e7e7e4
WIP: Undo / Redo stack.
...
Integration of the "cereal" serialization library.
Serialization / deserialization of the DynamicConfig / DynamicPrintConfig.
DynamicPrintConfig serializes ordinal identifiers instead
of the option key strings to conserve space.
2019-06-26 13:26:49 +02:00
c82fd692c3
Merge branch 'master' into tm_builtin_pad
2019-06-20 10:04:17 +02:00
12396c3051
Fine tuning parameters and fixing pad wings when greater gaps are used.
2019-06-12 13:15:42 +02:00
6877c075dc
SPE-742: Parameter layer for zero elevation feature.
2019-06-11 18:17:20 +02:00
baab5e49f1
Mirroring parameters prepared for UI.
...
Actual mirroring disabled, it will be refactored to maintain clarity of code.
2019-05-18 16:56:46 +02:00
c7f6e5436c
Fix of
...
Extend the "filament type" list with PC or allow free form text into the filament type field. #1704
2019-05-17 11:46:46 +02:00
a61e833536
Implemented the "Support for support enforcers only" quick selection.
...
Reduced some memory leaks due to the ConfigDef::default_value pointer.
2019-05-03 18:01:39 +02:00
c702ddc65d
Adding absolute correction (XY offset) and gamma correction parameters.
2019-04-09 13:42:32 +02:00
c6b5fe05e4
Scaling correction parameters in material and print conf.
...
Scaling is applied in sla_trafo but no effect unless set before model import.
2019-04-03 17:34:46 +02:00
1224491cd4
Removed obsolete Dwarf parametes from FFF Print settings.
2019-03-13 19:21:56 +01:00
c7ba650097
Help for the FFF / SLA command line parameters.
...
Removed the cli parameter from most options as it is derived
from the option key. Options without CLI parameter are now marked
with cli = nocli.
2019-03-13 19:17:26 +01:00
2ba661cb76
Merge branch 'master' of https://github.com/prusa3d/Slic3r
2019-03-13 15:45:01 +01:00
18025cc669
Reworked the command line interface based on the current state
...
of the upstream.
Thanks @alexrj, @lordofhyphens for the original code of slic3r.cpp
2019-03-13 15:44:50 +01:00
1cb1c12812
Fine tuning the new parameters and adding max_pillar_link_distance
2019-03-08 11:39:34 +01:00
857b68a82a
PrintHost: Fix host type configuration, refactor, fix #1687
2019-03-05 16:12:15 +01:00
e3cba0a65a
Introduced the "slice_closing_radius" to define, how large gaps
...
will be closed after triangle mesh slicing.
The value is set to 0.049 by default, which corresponds to the hard
coded default in Slic3r-1.41.3.
See issues #520 #820 #1029 #1364 for the reference of why we need
the parameter for being able to print some specific models.
2019-03-01 17:53:02 +01:00
2b03c25bc6
Pad "tilt" changed to "slope"
2019-02-25 16:04:46 +01:00
01c9b13ade
Disabling pad edge radius and adding the "wall tilt" parameter.
2019-02-25 12:06:38 +01:00
ab30370fb4
Split the external infill pattern to separate top / bottom config values.
...
Based on f9344a00e3#475 , #479 , #1133 , #1474
2019-02-22 15:25:35 +01:00
fb8c66f223
Merge remote-tracking branch 'origin/master' into ys_sla_time_estimation
2019-02-20 15:14:53 +01:00
eb0fd03861
SLA supports - added parameters for the automatic generation (relative density measure and minimal distance of the points)
2019-02-19 16:34:52 +01:00
9d0acc010d
Added new options for SLAPrintSettings (faded_layers) and SLAPrinterSettings (fast/slow_tilt_time and area_fill)
2019-02-18 16:24:55 +01:00
c3e1be7531
Added parameter "support_buildplate_only" for SLA supports.
2019-02-05 11:16:03 +01:00
c82d346c1a
Fixed a bug in initialization of some StaticPrintConfig derived classes.
...
Merged implementation of support for "Octoprint-Cancelobject" #972
thanks @supermerill
2019-01-31 15:09:16 +01:00
57bd0889c3
Disabled the experimental pressure equalizer.
2019-01-29 18:07:45 +01:00
1947925263
Added parameter for pillar connection mode
2019-01-09 12:21:43 +01:00
5b1c1d5922
Fixed a bug in the Win32 start wrapper (wrong number of parameters was passed for the GUI slic3r.exe).
...
Reworked command line processing for the GUI slic3r. Now the config is loaded first, then the model files (also the configs from AMF/3MF are applied), and lastly the free standing parameters are applied.
Fixed unescaping for command line parameters. The string parameters are now not unescaped, string vector parameters are unescaped only if enquoted.
Tab::load_current_preset() - disabled CallAfter for predictability. With CallAfter, it was difficult to call the method in sequence with other methods.
Fixed some missing ->Destroy() calls on dialogs created from MainFrame
Fixed some compiler warnings.
2019-01-09 10:43:17 +01:00
237eaa5f6f
Fix #1526 --datadir not working
2019-01-03 16:19:08 +01:00
66b5deccf5
PrintHost: Basic SL1 support
2018-12-18 14:37:35 +01:00
