* Brim can follow EFC outline
* Optimization
* Update Spanish EFC brim description
Adopt reviewer-proposed wording from RF47.
Co-authored-by: RF47 <RF47@users.noreply.github.com>
* Tag Orca specific changes
Tag Orca specific changes vs. Bambu using the comment //ORCA: . This helps when reviewing merge commits from upstream Bambu so we don't end up causing regressions when pulling in commits from upstream
* Tooltip update
---------
Co-authored-by: RF47 <RF47@users.noreply.github.com>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Fix adaptive fill issues
- Disconnecting from walls at low density
- Not supporting rotation
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Grid non-crossing for multiline
cleaning
Replaced negative offset logic with surface contraction to reduce overlap with perimeters.
center the infill
filltriangles
update triangles
preallocate memory
Update FillRectilinear.cpp
Update FillRectilinear.cpp
overlapp adjustment
Fix Crash
Update FillRectilinear.cpp
density tunning
density tunning
fine tunning
reserve polilines
Grid non-crossing for multiline
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-Authored-By: discip <53649486+discip@users.noreply.github.com>
* Improve multiline fill offset and polyline closure
Changed offset type from jtRound to jtMiter in multiline_fill for better geometry. Updated polyline conversion to require at least 3 points and ensured polylines are closed if not already. Updated FillGyroid, FillTpmsD, and FillTpmsFK to pass the 'close' argument to multiline_fill.
cleaning
FillAdaptive Noncross
Only use clipper if worth it
safeguard
fix overlap
Update FillRectilinear.cpp
FilllRectilineal multiline clipper
Update FillRectilinear.cpp
FilllRectilineal multiline clipper
Update FillRectilinear.cpp
Update FillRectilinear.cpp
fix 3d honeycomb
Simplify polylines
Update FillBase.cpp
Update FillBase.cpp
cleaning
Improved Multiline Function
This ensures `multiline_fill()` will correctly generate multiline infill with
closed loop polylines if the input infill line is a closedloop polyline. This
ensures that the multiline infill doesn't have little gaps or overlaps at the
"closed point" of the original infill line.
This changes how the tangent is calculated for the first and last points in a
polyline if the first and last points are the same, making it a closed loop.
Instead of just using the first or last line segment, it uses the line segment
between the points before the last point and after the first point, the same
way that all the other poly-line mid points are handled.
It also uses eigen vector operations to calculate the points instead of
explicitly calculating the x and y values. This is probably faster, and if not
then it is at least more concise.
Hibrid Multiline Function
Update FillRectilinear.cpp
Update FillRectilinear.cpp
Update FillRectilinear.cpp
Update FillRectilinear.cpp
clipperutils multiline hibrido
Update FillBase.cpp
Update FillBase.cpp
Update FillBase.cpp
multiline hibrido
arc tolerance
multiline con union
Update FillBase.cpp
Update FillBase.cpp
Update FillBase.cpp
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-Authored-By: Donovan Baarda <dbaarda@gmail.com>
* Switch multiline offset logic to Clipper2
Replaces Clipper-based multiline offset logic in FillBase.cpp with Clipper2, using InflatePaths and Union for offsetting and merging. Adds new conversion utilities in Clipper2Utils for handling Paths64 to Polygons/Polylines and updates headers accordingly.
* Refactor multiline_fill to always use Clipper2 logic
Removed the 'use_clipper' parameter from multiline_fill and updated all callers to use the new signature. The function now consistently applies Clipper2-based offset logic for multiline infill, simplifying the code and ensuring uniform behavior across fill patterns.
* Change offset join type to Round in multiline_fill
Replaces the Miter join type with Round in the InflatePaths call within multiline_fill. For smotther print travels.
* Increase max infill multiline to 10
Raised the maximum allowed value for the 'Fill Multiline' infill parameter from 5 to 10 to support more lines in infill patterns.
* Refactor multiline_fill to optimize offset logic
Replaces manual conversion of polylines to Clipper2 paths with Slic3rPolylines_to_Paths64 and filters short paths using std::remove_if. Uses ClipperOffset for path inflation and streamlines merging and conversion to polylines, improving performance and code clarity.
* half iteration because is bucle
* Funciona 1
Refactored the multiline_fill function to streamline the insertion of center lines by directly checking for odd line counts and removing redundant logic. This improves code clarity and reduces unnecessary checks.
* Refactor multiline_fill for improved offset logic
Reworked the multiline_fill function to simplify and clarify the logic for generating multiple offset lines. The new implementation computes offsets more explicitly for odd and even cases, creates a fresh ClipperOffset for each band, and improves conversion between Clipper2 paths and polylines. This enhances maintainability and correctness of the multiline fill generation.
* Quartercubic multiline
* fillplanePath
fix bounding box
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* fillconcentric multiline
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Update FillBase.hpp
* cleaning
* Refactor multiline_fill to clean polylines and reuse offsetter
Invalid polylines with less than two points are now removed before processing. The ClipperOffset object is created once and reused for each offset, improving efficiency and code clarity.
trigger build
* Optimize Filltrapezoidal
Refactored the trapezoidal fill pattern generation to precompute base row templates and reuse them with vertical translation, reducing redundant computations and improving code clarity. This change enhances performance and maintainability by avoiding repeated construction of row patterns within loops.
* Replace push_back with emplace_back for Polyline points
Updated Polyline point insertion from push_back to emplace_back for efficiency and clarity. Also refactored row copying logic to avoid in-place modification, improving code readability and safety.
* Update FillRectilinear.cpp
* Reserve space for poliline points
* Union not needed
* Update FillRectilinear.cpp
* unused functions
* compactado
Update FillRectilinear.cpp
* Adjust minimum rows for better performance
* Update FillRectilinear.cpp
---------
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
Co-authored-by: Donovan Baarda <dbaarda@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Adjust resonance avoidance speed calculation
* Only adjust if it's strictly below max
* If the speed is over half of the set speed range,
use the max speed to prevent slowdowns
Signed-off-by: Kuran Kaname <celtare21@gmail.com>
* update comment
---------
Signed-off-by: Kuran Kaname <celtare21@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Fix filament preset undo/dirty tracking to match Bambu behavior
Use deep compare for filament presets so vector options report #idx keys.
Align undo/dirty mapping with indexed fields and Bambu’s filter_diff_option.
Pass explicit indices for filament override fields.
Add missing filament variant keys (retract lift bounds, ironing overrides) to filament_options_with_variant so per‑filament undo works.
* Automatically generate extruder id & printer extruder variant mappings for non-BBL multi-extruder printers
* Support different layer height limit for non-bbl multi-extruder printer
* Add auto slice after changes option
Introduces a new 'Auto slice after changes' setting in Preferences, allowing OrcaSlicer to automatically re-slice when slicing-related settings change. Implements logic in Plater to schedule auto-reslicing if the option is enabled and conditions are met, and sets the default to false in AppConfig.
* Improve auto-reslice scheduling after slice cancellation
Adds a flag to track when auto-reslice should be triggered after a slicing process is cancelled. Ensures that auto-reslice is scheduled once the current slicing process completes and is not lost if a slice is cancelled mid-operation.
* Add configurable delay for auto slice after change
Introduces a new 'auto_slice_change_delay_seconds' setting to control the delay before auto slicing starts after a change. Updates AppConfig to set a default value, adds a timer and logic in Plater to handle the delay, and exposes the setting in Preferences. This allows users to group multiple edits before triggering auto slicing.
* Combine auto-reslice checkbox and delay input in preferences
Replaces separate auto-reslice and delay settings with a unified UI element in Preferences. The new function create_item_auto_reslice adds both the checkbox and delay input in a single row, improving usability and code organization.
* Move auto reslice option into Control > Behaviour
* Remove 'loop' icon from AutoSlice
* Default disable and 1 Sec
Spiral Z-Hop resolution
Use slicing resolution to determine segment count for emulated spiral Z-hop
What’s changed
The number of linear segments used to approximate a spiral Z-hop is now derived from the PrintConfig resolution value.
The segment count is clamped to a safe range (4–24) to avoid excessive G-code generation or MCU queue overflow.
Why
Previously a fixed 24 segments were always used, regardless of model resolution.
For small-radius spiral lifts this was excessive and could overwhelm some printers.
Adapting segment count to resolution ensures smooth motion where needed, but lighter G-code where possible.
Details
m_resolution is now stored via apply_print_config().
_spiral_travel_to_z() uses this value to compute segment count dynamically.
Only the linear-segment fallback path is affected; G2/G3 arc-fitting remains unchanged.
* Add ability to disable Power Loss Recovery
* Fix typo in PrintConfig.hpp for power loss recovery
* Attempt to resolve Unknown option exception: disable_power_less_recovery
Add disable_power_loss_recovery property to any json which had scan_first_layer
* Revert "Attempt to resolve Unknown option exception: disable_power_less_recovery"
This reverts commit ddaf34b317f8797540235b8f7d179b1c9b6d10f8.
* Fix typo
* Change attribution from BBS to Orca in PrintConfig.cpp
* Mini refactor power loss recovery handling in GCode export
- Moved power loss recovery G-code generation to a new method in GCodeWriter.
- Support Marlin 2
* Update comments and power loss recovery handling
* Implement power loss recovery G-code commands
Added functions to start and end power loss recovery with appropriate G-code commands and comments.
* Add power loss recovery methods to GCodeWriter
* refactor and fix build errors
---------
Co-authored-by: Michael Rook <michael@rook.id.au>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fix tooltip + URL
* Full Material wiki redirection maping
* Machine wiki + append_option_line wiki linking
* Machine wiki 2
* Update README with improved wiki links and clarity
* Bring back Print statistics options
* Move num_extruders config to OtherSlicingStatesConfigDef
The num_extruders configuration option was relocated from OtherPresetsConfigDef to OtherSlicingStatesConfigDef for better organization and relevance. This change ensures that the number of extruders is defined in the context of slicing states rather than presets.
* Unifi adaptative bed mesh
* Get libslic3r tests closer to passing
I can't get geometry tests to do anything useful. I've added extra
output, but it hasn't helped me figure out why they don't work
yet. That's also probably the last broken 3mf test doesn't work.
The config tests were mostly broken because of config name changes.
The placeholder_parser tests have some things that may-or-may-not
still apply to Orca.
* Vendor a 3.x version of Catch2
Everything is surely broken at this point.
* Allow building tests separately from Orca with build_linux.sh
* Remove unnecessary log message screwing up ctest
Same solution as Prusaslicer
* Make 2 TriangleMesh methods const
Since they can be.
* Move method comment to the header where it belongsc
* Add indirectly-included header directly
Transform3d IIRC
* libslic3r tests converted to Catch2 v3
Still has 3 failing tests, but builds and runs.
* Disable 2D convex hull test and comment what I've learned
Not sure the best way to solve this yet.
* Add diff compare method for DynamicConfig
Help the unit test report errors better.
* Perl no longer used, remove comment line
* Clang-format Config.?pp
So difficult to work with ATM
* Remove cpp17 unit tests
Who gives a shit
* Don't need explicit "example" test
We have lots of tests to serve as examples.
* Leave breadcrumb to enable sla_print tests
* Fix serialization of DynamicConfig
Add comments to test, because these code paths might not be even used
anymore.
* Update run_unit_tests to run all the tests
By the time I'm done with the PR all tests will either excluded by
default or passing, so just do all.
* Update how-to-test now that build_linux.sh builds tests separately
* Update cmake regenerate instructions
Read this online; hopefully works.
* Enable slic3rutils test with Catch2 v3
* Port libnest2d and fff_print to Catch2 v3
They build. Many failing.
* Add slightly more info to Objects not fit on bed exception
* Disable failing fff_print tests from running
They're mostly failing for "objects don't fit on bed" for an
infinite-sized bed. Given infinite bed is probably only used in tests,
it probably was incidentally broken long ago.
* Must checkout tests directory in GH Actions
So we get the test data
* Missed a failing fff_print test
* Disable (most/all) broken libnest2d tests
Trying all, not checking yet though
* Fix Polygon convex/concave detection tests
Document the implementation too. Reorganize the tests to be cleaner.
* Update the test script to run tests in parallel
* Get sla_print tests to build
Probably not passing
* Don't cause full project rebuild when updating test CMakeLists.txts
* Revert "Clang-format Config.?pp"
This reverts commit 771e4c0ad2fdbaa26a8fee77030650afacdc5083.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Clipper2 from BBS
* Fix
* Clipper2 Update: 1.5.2 -> 2.1.5.4
* Replace Clipper2Lib::Area calls with Clipper2LibArea
Updated area calculation calls to use Clipper2LibArea<T> instead of Clipper2Lib::Area<T> in multiple locations. This change likely reflects a refactor or renaming of the area calculation function.
* Revert "Replace Clipper2Lib::Area calls with Clipper2LibArea"
This reverts commit c92a9a1522e8d7b0f1f8557d4c752a8b8c8fc279.
* Revert "Clipper2 Update: 1.5.2 -> 2.1.5.4"
This reverts commit a745894bdc9cda4ce4d19e0705d214b78091acad.
* Update project version
1.Immediate do lift in eager_lift function
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I931d22e901e2123bb886c31d8d1a5788fddeed42
(cherry picked from commit 6cea772d4f3b2f7e2a43c35a2271e4bdbba9eadd)
* The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed
* Merge branch 'main' into main
* Merge branch 'SoftFever:main' into main
* Revert "The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed"
This reverts commit 8d296720b8de58b1bfa4f008a24cee841a8472c6.
* Update Qidi Q2 0.4 nozzle.json
修改Q2打印高度
* Merge branch 'SoftFever:main' into main
* Merge branch 'SoftFever:main' into main
* change machine_gcode
* Merge branch 'main' of https://github.com/HYzd766/OrcaSlicer
* Merge branch 'SoftFever:main' into main
* Multi-color code compatible with QIDI models
* Merge branch 'main' into main
* toggle axis visibility on canvas (#9666)
* toggle axis visibility on canvas
* set show_axes config on toggle
* fix: Add pause and filament change to machine gcodes for Sovol SV08 MAX (#11214)
* Add fixed Ironing Angle setting for uniform surface finish (#11195)
* Initial working fixed ironing angle implemented with new Fixed ironing angle setting
* update documentation
* Combine Fill.is_using_template_angle and Fill.alternate_fill_direction into Fill.fixed_angle
* Rename SurfaceFillParams.is_using_template_angle to SurfaceFillParam.fixed_angle.
* Initial working fixed ironing angle implemented with new Fixed ironing angle setting
* update documentation
* Combine Fill.is_using_template_angle and Fill.alternate_fill_direction into Fill.fixed_angle
* Rename SurfaceFillParams.is_using_template_angle to SurfaceFillParam.fixed_angle.
