6a2d4b878b
ENH: refine logic in filament group in gcodeviewer
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Id89daec05f2d4017d326c6473bd62008dd9f0b11
(cherry picked from commit 2e26c5812a98e47a25d97e7f574e8a4d8e8f7f9e)
2025-09-10 16:29:49 +08:00
c605f73d80
ENH: update translation
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I9b260cb3e21b9052c9a2d65378bd0e795f6db6f3
(cherry picked from commit 2507eba37d5f09cca51b3e9f9f281b2208e57eb1)
2025-09-10 15:02:23 +08:00
f9869d4b5b
ENH: seperate statitics for auto for flush mode
...
1.Compare stats of AutoForFlush with other filament map modes
2.Refine the function signature of filament group
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Iec2aff069d8c44343df8b82f045c61354c7d1c2a
(cherry picked from commit 95e49986f32070756182a31843f4f37f863f07ac)
2025-09-06 23:52:55 +08:00
057a1a4f5d
ENH: refine ui logic with filament group
...
1. Add filament group pop up when slice
2. Add more filament modes in filament dialog
3. Add capsule button
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I8bc3a2e08696e406b89e550a0335a1a36728ee65
(cherry picked from commit f1702a5c3604f685a3b35ea0e83d29bdbbd90f70)
2025-09-06 23:52:20 +08:00
05bf5c114b
ENH: filament map params switch to global param
...
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
(cherry picked from commit e45f8c6dc2146e1e31a1c21e8aaada540af112d0)
2025-09-06 23:49:11 +08:00
e0435c3e31
ENH:Optimize the gcode viewer and STEP mesh UI
...
jira: nojira
Change-Id: Ie8d4f1eace04b2c51d4975c67b9a4deb7d88a56f
(cherry picked from commit b9aa0397600ab0f5040ac719277c7b16b1371435)
2025-09-06 23:08:56 +08:00
38ed01f61f
gCode Legend Fixes / Improvements ( #10501 )
...
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
2025-09-04 00:00:26 +08:00
1f9d27d880
FIX:The color scheme selection has been reset.
...
jira: nojira
Change-Id: I8bf7a8db4e40315b68e610008c865c319ba70172
(cherry picked from commit 5ae194be77187ba349389dc3726cacbcf89dea9c)
2025-08-28 14:10:57 +08:00
eac07fd8e3
ENH: buildvolume: add logic to support extruder_printable_height
...
jira: no-jira
Change-Id: I962c4aed8c536c0fd8b89ae090cd0463c5d645db
(cherry picked from commit 43773d77010492453473797e77e83e9a4630c25f)
2025-08-24 23:18:30 +08:00
ac19851e52
ENH: Add automatic slicing behavior for some steps
...
jira: none
Change-Id: If94726eee45724985b3b49b36695086da24f7848
(cherry picked from commit 0476a83264660841c5601168ab6f11a9c70411ff)
2025-08-24 23:18:29 +08:00
f888fafc07
ENH:colour arrangement ui text width limit
...
jira: nojira
Change-Id: I6a8f4341e671aa88704346bfeb1d8be3725619a1
(cherry picked from commit 3cb36b51119ef4468febeab9246e103226c42a07)
2025-08-24 23:18:23 +08:00
5d17c51aa9
FIX: add set to Optimal button
...
2. modify the manual mode of filament_dialog
jira: none
Change-Id: I2ce6834eb65de2da70e7649346fc88b90f280b29
Change-Id: I18448e800fe3338f045d35f7a1fa6c3e3c8eef79
(cherry picked from commit 5dce0ebc06f6aace50374fa37bd91cabb5213385)
2025-08-24 23:18:22 +08:00
b6197c460b
FIX:loss is_auto
...
jira: nojira
Change-Id: I3511b0abdbdb94b9517a1b21c95ce224d0f7422d
(cherry picked from commit c4cdc2e8f3960a9128ab7a8a7a62717351bcdbbc)
2025-08-24 23:18:22 +08:00
e26e2ca793
ENH:change Color Arrangement ui
...
jira: nojira
Change-Id: I77f84675da0b4fe7069c76c14668026fc3d8932a
(cherry picked from commit 785b8c7b2f5ee014fedea57a88693888d2b8ca26)
2025-08-24 23:18:20 +08:00
8bfe3a818c
ENH: color arrangement ui
...
jira: STUDIO-8124
Change-Id: Ibcde0e002ffd652b350bd05a9453ce7aaefd7bca
(cherry picked from commit 65e3829f92ceb0bd2152ff255640453a8216cc0c)
2025-08-24 23:18:18 +08:00
c9708236ac
FIX: fix ui display problem
...
jira: STUDIO-8143 STUDIO-8142
Change-Id: I50abb78f9585378d3ef7278377dfb35d5db6189d
(cherry picked from commit 00a6e17c6c21e741f8427f6841047fe49e6330cf)
2025-08-24 23:18:16 +08:00
1b70bd38f2
ENH: check wethether filaments print on first layer
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: I1cc7cd9e9bbbcdf72112c0949196c09ef414cf91
(cherry picked from commit 67039a6f4d51482fe689a2aad0a900f3339a5c62)
2025-08-24 23:18:14 +08:00
135b39526e
ENH: Add gcode check for multi_extruder
...
jira: none
Change-Id: Iebc43e608c4509eb62b280af2d401fa9e0e089ba
(cherry picked from commit c75c10e312b8d0bd5404d92db88c95a9e6186bc1)
2025-08-24 23:18:14 +08:00
f702ad9fd2
ENH: dual_extruder: add logic to process extruder_printable_area
...
JIRA: STUDIO-7498
Change-Id: I1cf53db93acf41b06cb1b9569a0679487c9f1e41
(cherry picked from commit e5be69dedd1ba6dc289a14b89598c9a6101dacb3)
2025-08-24 23:18:12 +08:00
0116923f58
FIX: single printer should not display summary item for default
...
jira: 7948
Change-Id: I9d13ebe8e52eb46e1ef9f7bd62f814bc7837dbe6
(cherry picked from commit aba72bb04f9decd5ca02400626aeadfab35b243e)
2025-08-24 23:18:12 +08:00
6c6e9afd02
ENH: add summary for gcode preview
...
jira: none
Change-Id: I481536e0d950ebe695236e55ffca8113a26d8033
(cherry picked from commit 1040f007b658c0a34e0cef5a677373829c1b81b4)
2025-08-24 23:18:11 +08:00
9380260a74
FIX: load_from_svg_file_change_color() supports 8bit colour values
...
JIRA: nojira
Change-Id: I72e68bd9cb547064736d130205074da0e7eabd60
(cherry picked from commit 8bdac292a0bd34786189f4ca320f646340157d2c)
2025-08-24 23:18:10 +08:00
6598b626e7
ENH: save multi extruder state in gcode processor
...
1.Save multi extruder state in gcode processor
2.Add machine exturder change time
3.Fix some naming issues
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I9785331290515eeb908ff0ff01aad5aac44212d9
(cherry picked from commit b49d4ca1539cd9f473e0ee0c79a4287c0d5fe03b)
2025-08-24 23:18:10 +08:00
8331f8eba8
ENH: add manual grouping mode stats
...
1.In auto mode,display the statistics of auto mode and single
extruder
2.In manual mode,display the statistics of manual mode and auto mode
3.Support by object mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: If54c4db79f33d5278c0f18d01ab0518e8660f9c7
(cherry picked from commit 2dbc5c939666e294c805ee4bf33ec09976688be3)
2025-08-24 23:18:08 +08:00
067d1484ab
ENH: add filament saved by multi extruder
...
1.Add filament flush,filament change count reduced by multi
extruder
NTOE: cases when printing by object haven't been handled
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Iaaea5f8ffae2345df5a6f1dc605342d835974d48
(cherry picked from commit ad65cdb909b29210117f690a119ef76b70373da4)
2025-08-24 23:18:08 +08:00
afac07c166
Don't bother with extruder variants
...
Fix compile error
2025-08-24 23:18:08 +08:00
c34eb170f1
NEW: Add FilamentMapDialog
...
support drag drop to modify the filament map
jira: none
Change-Id: I0ed3180a0fa8e95e7c871bb039eb844faccd1344
(cherry picked from commit 67f67d76889668fdd80ae5e496b6cbca5f771a43)
2025-08-24 23:18:07 +08:00
5e64197e08
FIX: inconsistent colour arrange display at different resolutions
...
JIRA: no
Change-Id: Id838bf68c8a58d9075994052af10fa31bacc2ed3
(cherry picked from commit 91ea29eb56a148606cc645dfbca17fe470cb6131)
2025-08-24 23:18:06 +08:00
2ff3b46a7e
FIX: fix build error
...
jira: none
Change-Id: I97df69b728fc3871b7c33e1fd3ba068e741d51c7
(cherry picked from commit 326d7d28b47017bdbd98873a6437ef84116291ba)
2025-08-24 23:18:05 +08:00
d7029d383f
FIX:gcode viewer color arrangement recommendation
...
1.Limit of four filaments per row
2.Fix incorrect data
3.Add filament id display
4.Optimised layout
Change-Id: I9ac3701c99597a5ed243dac0e3e371cf9aca4066
(cherry picked from commit 3321277f86dfeb9de80b40c320e20dd5f33eab51)
2025-08-24 23:18:05 +08:00
fb2226208a
NEW: gcode viewer add recommended colour filament widget
...
Change-Id: I37f38a175bb3f4a574a4855f8fef04e704da259c
(cherry picked from commit 4014c61f889f5cf0b7830123fb0a72690ff4e1e5)
2025-08-24 23:18:04 +08:00
586921fa4d
GCodeViewer will now always show the estimations ( #10333 )
...
Co-authored-by: SoftFever <softfeverever@gmail.com >
2025-08-24 20:13:34 +08:00
fa70582ed1
Standard units don't need translation ( #9965 )
2025-06-22 15:10:40 +08:00
dd6b0fb793
Fix character spacing issue in GCODE preview for Italian ( #9778 ) ( #9914 )
2025-06-17 20:36:04 +08:00
3e48390cee
Remove markers from strings that don't need to be translated ( #8842 )
...
Remove markers from text that does not need to be translated
2025-05-11 15:04:48 +08:00
d37f1b6a81
Fix english strings consistency ( #8881 )
...
* "non zero" -> "non-zero"
* "Z hop" -> "Z-hop"
* "works" -> "is working"
* "version at least x" -> "version x or higher"
* "printing job" -> "print job"
"to print on" -> "printing on"
* "is not find" -> "was not found"
* "boundary of plate" -> "plate boundaries"
* "toolchange" -> "tool change"
* "colour" -> "color"
* "cancelled" -> "canceled"
* "can not" -> "cannot"
* "gcode" -> "G-code"
2025-04-26 19:59:49 +08:00
e2b16f527a
Improve gcode preview flow rate scale ( #9319 )
...
* Ignore very tiny extrusions in flow rate scale (SoftFever/OrcaSlicer#9190 )
* Don't show flow rate if it's not extrusion
* Merge branch 'main' into bugfox/gcode-viewer-flow-scale
2025-04-23 23:37:08 +08:00
82bc52cbcc
hotfix: avoids legend-viewer horizontal overexpansion on linux ( #9171 )
...
hotfix: avoids legend-viewer horizontal overexpansion on linux (enhancement 9fe905c
2025-04-10 23:50:41 +08:00
9fe905c47d
gCode Legend & Viewer Improvements ( #8198 )
...
* commit
* update buttons and icons
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* replace invisible item icon
* reduce code changes & add svg icons for hidden / visible
* update
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* fix window width when scrollbar visible
* Update GCodeViewer.cpp
* Update GCodeViewer.cpp
* add corner rounding to all plate stats
* Update GCodeViewer.cpp
* update
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
2025-03-30 20:07:49 +08:00
118e14d788
Gcode Statistics Panel Fixes ( #8172 )
...
* Gcode Statistics Panel - Persist open/close state
Bug: On slicing a model, the Statistics Panel would be reset to being open (regardless of if the user had shut it earlier)
Fix: Now on app open the Statistics Panel will be open, but if the user closes it, its state will persist (regardless of slicing again)
https://github.com/SoftFever/OrcaSlicer/discussions/6021
* Gcode Statistics Panel - fold/unfold button width fix
Issue: The fold/unfold button width is too wide (It seems CalcTextSize is making the button wider than necessary)
Fix: Set the width to a correct fixed value
2025-01-26 08:58:38 +08:00
727a3887c5
Add Orca Filament Library
2025-01-15 22:40:27 +08:00
3b1c4f9ee4
Do not create raycaster when loading the gcode preview ( #7596 )
2024-11-30 21:36:22 +08:00
07d79376d3
Warnings: remove empty code ( #6577 )
...
* Warnings: remove empty code
2024-09-07 18:18:35 +08:00
13e18d1d65
Use a 2-pass depth based outline algorithm when selected
2024-08-18 19:31:08 +08:00
7082e945b1
Revert "Fix Compile Warnings ( #5963 )"
...
This reverts commit b83e16dbdd
2024-08-12 00:00:20 +08:00
b83e16dbdd
Fix Compile Warnings ( #5963 )
...
* Fix calls to depreciated wxPen constructor
* Fix use of wxTimerEvent
* Fix unrecognized character escape sequence
* Fix signed/unsigned mismatch
At least as much as possible without significantly altering parts of the application
* Clean unreferenced variables
* fix mistyped namespace selector
* Update deprecated calls
* Fix preprocessor statement
* Remove empty switch statements
* Change int vector used as bool to bool vector
* Remove empty control statements and related unused code
* Change multi character constant to string constant
* Fix discarded return value
json::parse was being called on the object, rather than statically like it should be. Also, the value was not being captured.
* Rename ICON_SIZE def used by MultiMachine
By having the definition in the header, it causes issues when other files define ICON_SIZE. By renaming it to MM_ICON_SIZE, this lessens the issue. It would probably be ideal to have the definitions in the respective .cpp that use them, but it would make it less convenient to update the values if needed in the future.
* Remove unused includes
* Fix linux/macOS compilation
* Hide unused-function errors on non-Windows systems
* Disable signed/unsigned comparison mismatch error
* Remove/Disable more unused variables
Still TODO: check double for loop in Print.cpp
* Remove unused variable that was missed
* Remove unused variables in libraries in the src folder
* Apply temporary fix for subobject linkage error
* Remove/Disable last set of unused variables reported by GCC
* remove redundant for loop
* fix misspelled ifdef check
* Update message on dialog
* Fix hard-coded platform specific modifier keys
* Remove duplicate for loop
* Disable -Wmisleading-indentation warning
* disable -Wswitch warning
* Remove unused local typedefs
* Fix -Wunused-value
* Fix pragma error on Windows from subobject linkage fix
* Fix -Waddress
* Fix null conversions (-Wconversion-null)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
2024-07-29 21:00:26 +08:00
b40e6c0b9a
Fixing high GPU usage when color scheme is set to "Filament" or "Speed" ( #6223 )
...
removed imgui.set_requires_extra_frame(), this line causes Slic3r::GUI::GLCanvas3D::render() to be called repeatedly when 'Filament' or 'Speed' is selected for preview panel
2024-07-25 22:38:05 +08:00
6369772510
Improve gcode preview navigation ( #5326 )
...
* preview: home/end to move to start/end step of the layer
Add HOME and END key action to preview tab which moves horizontal slider
position to a first and last position respectively
* preview: cross-layer gcode inspection
Automatically advance gcode preview to the next layer when pressing
right at the last step of the layer. Same for the first step of the
layer: pressing 'left' will switch preview to the previous layer
2024-05-19 22:27:25 +08:00
e40d7780d5
Color fixes ( #5239 )
...
* Update plate name & number colors
* Update sliced plates selected item border color and "All Plates Stats" text color
* Simplify gizmo update slider thumb and text color
* Update confirm button hover color
* Fix assembly info titlebar not compatible with dark mode
* Update selected tab color on set filaments to use window
* Update gCode viewer text colors
* Update color of selection rectangle
* Update gcode view slider value text color
* Paint gizmos update colors for tool / brush buttons
* Update colors of gizmo radio buttons
* Update combined slider thumb color for gizmos
* Update header color for gizmos
* Update titlebar buttons background color while hover
* Fix side bar header background not uses correct color for dark theme
* Update background colors of focused Combo box and checked item on Dropdown
* Revert changes for gCode Window text colors
* Revert changes for plate name / number text color
* Update background color of Sliced Plates list > Scrollbar
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
2024-05-06 22:41:28 +08:00
226450ea6a
Merge some features from BS1.9 beta4 ( #5181 )
...
* FIX: linux: fix the building issue on Linux Mint 21.3 Virginia
github: https://github.com/bambulab/BambuStudio/issues/3874
author: https://github.com/lucianoloder
Change-Id: Ia3db6923d5dd68dba532d7bdba6f93f73cc51d59
* FIX: auto-arranging incorrect with rotation enabled
auto-arranging incorrect with rotation enabled and the objects already have been rotated.
jira: STUDIO-6022
Change-Id: I349d663efb1fc71367c8a77aa8ed5047a0bf2017
(cherry picked from commit 75fe40257a274ed83886e1ee20ce8dedd0de48f6)
* ENH: update X1C & X1E start gcode
1.Fix fan problem
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I68ee5be78e142e8a2a210a1a70f5663893390610
* ENH: update A series gcode
1. Update A1 series start gcode and change filament gcode
2. Add G2814 command
3. Add multi-filament extrusion compensation and vibration suppression
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I57d2bc8e98d3e547881dc1369c1fb31413c6205d
* FIX: fix some cali problem of P series
jira: none
Change-Id: Id57ea8d65da22ab653cca49509cb923ff065e43f
* FIX: fix can't enter ',' in multiplicator
github: #3805
Change-Id: I6dd70822d1c2e79d66c70514d6dd580ab029c7ea
* calib wizard
* NEW: FlipLines infill
jira:6701
New infill pattern that combine block lines infill and switching layers for smooth transition.
Change-Id: I2608a2d39b14efcdfe9d39a9437280da350b94c0
(cherry picked from commit 8d0a09c8b763dfc924cbba9913c241e6afadbc7f)
* ENH: add nozzle blob detection and air printing detection
jira: new
Change-Id: Ie4a19a7ad7d0b10a021c516cbc3a84b4ae734302
* FIX: Top surface bridging fail on 3DHC & FL infill
Add 45 degree angle offset when processing the bridge.
Need to raise infill_direction to invalidate posPrepareInfill
jira: 6774
Change-Id: I5e6bef3aa814b01c5f30398ac745937a67e3ef4c
(cherry picked from commit 7b12cab10b88f432a11414f8caa1c6427777a1ba)
* FIX: the error display when reset virtual slot
jira: none
Change-Id: I5ae5899baf1bfc2aaadb832083b277855a669fd5
* FIX: Error "Voronoi cell doesn't contain a sourcepoint"
github: 3859
Change-Id: Idca84992bcba5380bfe05e63ac9a5e40419dcfdf
* fix build error
* FIX: CLI: fix the crash issue caused by get_min_flush_volumes
JIRA: no jira
Change-Id: I0d5bfd605e51ebddac8fddc4d83dab5055b0fbf2
* FIX: can't use support filament in gcode.3mf
1. Add total_filament_volumes, directly access it to get used filaments
github:#3865
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717
* ENH: p series support long retraction
1. P series support long retraction in filament
2. Add long retraction params in common.json
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ib94184fa1f0b5ab151360f1f053d8c8ff92e7e18
* ENH::modify some logs level
jira:[for log]
Change-Id: I6a46b8fcd3a030b4b630e800fe9a9ac5c387f117
* NEW: support multi device
JIRA: STUDIO-6072
Change-Id: Ic514c4097767b0a728368c9ea48ee103c031fbb0
Signed-off-by: Stone Li <stone.li@bambulab.com >
* ENH: update A1 series gcode
1.Update filament change gcode and machine start gcode for
A1 and A1 mini
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I2f3be3fd89fef21e717a32f2b89985fc046f7f6e
* FIX: always have 0th filament in ams mapping
1. Only set the filament id in map when flush length is not 0
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I6e0aeaf010f6e6dcbdc3bca5c0034aa60750bb67
* ENH: add filament id in slice info
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ic5fe4632bca8acacc9ffd072ee2ed207c1da37aa
* ENH: refine ui for multi machine
JIRA: STUDIO-6819 STUDIO-6824
1. Shrink the Send Print dialog box
2. add input box for flipping panel
Change-Id: I4174c79ecd239c374ee11478951e12be399c57ce
* FIX: fix Issues with sending multiple devices
JIRA: STUDIO-6876
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com >
Change-Id: I33c6a932863fc715c3f0eb5dfd4b299f980a4918
* NEW: support hms error code
Change-Id: Ic256a83cf501fb05bb9d3203f3d24cb1d1290fa4
* FIX:fixed some multi job issue
Change-Id: I338078ad8fcf809888db9d8daeb470a9bf4eab46
* NEW:support pin code binding
Change-Id: Ida5d47881fbd83f3ffedc80369cfe377114d7f13
* ENH:add printable check for devices
Change-Id: I672988fa9cfa986d924bfc64331752f4aef68067
(cherry picked from commit 69de9e5b8334ec94eec7fcee31038b8ff42d1d3b)
* FIX: add more fonts
jira: none
Change-Id: I6bafed3563083858f29e92a3d84906a2e53dcb5c
(cherry picked from commit afbea693e807dcc1c406a59aa5376b9ea2a5d606)
* ENH: load more fonts
this feature is according to Prusa by Filip Sykala<filip.sykala@prusa3d.cz >, thanks to Filip Sykala
jira: none
Change-Id: I55e92f184f750c0b93b679d4382aaa5b164ec5c3
(cherry picked from commit d05522c4cc5d7ee4cac42de398b88d347a55f74b)
* ENH: add ProfileDescription for translate
1.Add ProfileDescription.hpp simply for translating
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com >
Change-Id: Iaa3ced1edccf67eaeebde35c1e8b36442d2e9a6f
* ENH: Improve CrossHatch transation layers
jira: 6701
Change name from Flippingline to CrossHatch.
Reduce noise, improve speed by 6.5%. Improve transation layers by
gradually increasing rotation angle and overshoot the transation
layer while direction changed.
Change-Id: I17fcc45b409074d121bf5bb5702e15553d925b51
* UP
* ENH: modify the default config for multi-device
JIRA: STUDIO-6072
Change-Id: If6e7582a8274eb5e685b8b8545f6eab5d17de3f5
Signed-off-by: Stone Li <stone.li@bambulab.com >
* ENH: add long retraction for P series
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I6890695b67e674fc5cdc2a208e89bd9e41404213
* FIX: all plates stats data missing issue
jira: new
Change-Id: I137a2b6d69ad08791f5a9a9788653621960dc63f
* ENH:update pre print options
jira:[for multi]
Change-Id: I2e9bb8a09436a71749af98a0bad94e9922f95c81
* FIX:fixed can't popup pinbind win on macos
jira:[STUDIO-6895]
Change-Id: I664bba78cf27420d736b586df19e3c09c6f8ed21
* FIX:fixed the task of padding cannot be cancelled
Change-Id: I401a22118c14ca7601be7a925cfd8e4796dfc1e9
* ENH:Play video after redirecting to device page
jira:[STUDIO-6884]
Change-Id: Ia5e2ac84e3d71baacfcf941b782dab2325f35d54
* FIX: fix ui bug in send multi machine page for mac
JIRA: STUDIO-6882
Incorrect background color when renaming during multi machine printing
Change-Id: I6c551f5023ffe747e7a7e2f5703b0707c9505922
* FIX: Fix some bugs in maintaining the selected status of local tasks
JIRA: STUDIO-6824
Change-Id: I12c4da3fc56ac5077b3ccd7e89a4b57c3675eaf5
* ENH: local task sort by send time by default
JIRA: STUDIO-6885
Change-Id: I03b5881a39ab2e90c5b9cf46052ba465ee707ccc
* FIX: Clicking to continue printing does not take effect in error code
JIRA: STUDIO-6830
Detected an incomplete printing task error pop-up when power outage occurred. Clicking to continue printing did not take effect
Change-Id: Ie85a1602093dabac861cd1f41ea21e1c312c83e9
* ENH: use designTitle when designId > 0
JIRA: STUDIO-6072
Change-Id: I8342df053edeab16f930522e099e2eef91e5c5a4
Signed-off-by: Stone Li <stone.li@bambulab.com >
* NEW:import vertex and mtl color from obj file
Jira: STUDIO-6805
Change-Id: Iaacb13ee2451effdb83e5aba4b7fe1637b7fc95f
* FIX:change the strategy of merge_ka_kd
Upgrade ui, users can directly ok to proceed to the next step
jira: STUDIO-6805
Change-Id: Ia81019c2eacb503666680c0b8583d026baa0134c
(cherry picked from commit 38a2434753c8e3b422267283b16c75f6ad195b14)
* FIX:use default_strategy after modifed cluster number
jira: STUDIO-6915
Change-Id: I4e0c3d62f5a766f73d48d1e06c4364fc6babe1ac
* FIX: the bug of incorrect button without restarting
JIRA: STUDIO-6824
The bug can cause the user to not restart when opening the multi-device option, but the button of send multi-devices appears
Change-Id: I0837fa79ecc1d8ab5ce98273ad134fa2f830421e
* FIX: wrong default value for long retraction
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ifc2ec57a320fdb14e7ca746e5795501ed146ff32
* FIX: error code pop-up window without retry button in some code
JIRA: STUDIO-6922
Change-Id: I67464bebaba4558618301592c455db8824bbfe30
* FIX: air printing and nozzle blob detection issue
jira: STUDIO-6897
Change-Id: I008ddb24b74119d7e4124ae26310b4b86c42a799
* FIX:fix bugs of algo and read quad in obj file
Jira: STUDIO-6805
Change-Id: I6c33e8197225f27dccdfa0681e64d76d1df14f61
* dd
* ENH:Set the default nozzle diameter to 0.4
jira:[for nozzle]
Change-Id: I74a5c9b0460046496b897eae3d9f917ac1b99052
* FIX:fixed backspace error on macos
Change-Id: I76066391783c04857c1a60a6f8438111501b6d7c
* ENH:Subscription list deduplication
jira:[for mulit]
Change-Id: I10e9d849986c9661b587c7b1a509180c2451816e
* ENH:update wiki url for Pin Code
jira:[pin code]
Change-Id: I95faaa396a839b5b159119ef235b650c76706a84
* NEW:add OpenCV.cmake in deps
jira: none
Change-Id: I1ae4a2bd5618e9e620b08a937904d6af5d00bc41
* FIX:cancel obj import restrictions
jira: none
Change-Id: Iaf3e799ca982ad6aeb3ec76e9a416c4c8e4d100c
* NEW:add multiple printer restrictions
jira:[for multiple]
Change-Id: I0bb5a0c1062a543c42f8d67a9347efa358b0864a
* ENH:Added two entrances for adding devices
jira:[multi device]
Change-Id: Ieb6197e067d422979606f93b22b337a2399aec74
* slic3r: Fix wxFont being undefined
[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
In file included from /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:1:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.hpp:51:21: error: ‘wxFont’ does not name a type
51 | bool can_load(const wxFont &font);
| ^~~~~~
* slic3r: Fix missing BOOST_LOG_TRIVIAL declaration
[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp: In function ‘std::unique_ptr<Slic3r::FontFile> Slic3r::create_font_file(const char*)’:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:127:27: error: ‘error’ was not declared in this scope; did you mean ‘perror’?
127 | BOOST_LOG_TRIVIAL(error) << "Couldn't open " << file_path << " for reading.";
| ^~~~~
| perror
[447/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp
In file included from /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp:1:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp: In member function ‘void Slic3r::TaskStateInfo::set_state(Slic3r::TaskState)’:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp:40:9: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
40 | BOOST_LOG_TRIVIAL(trace) << "TaskStateInfo set state = " << get_task_state_enum_str(ts);
| ^~~~~~~~~~~~~~~~~
* fix OpenCV
* wip - build break
* fix build error wip
* ENH: support preset description(tooltip)
Change-Id: Iff005baac4974c538d1109fb0ba1df20b04a8f69
Jira: STUDIO-5754
* fix more build errors
* Revert "ENH: load more fonts"
This reverts commit 32b6fd199ac50e21db1f72089e5b3287a1776e04.
* change colors
* misc fixes
* restore export gcode btn
---------
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Signed-off-by: Stone Li <stone.li@bambulab.com >
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com >
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com >
Co-authored-by: lane.wei <lane.wei@bambulab.com >
Co-authored-by: Arthur <arthur.tang@bambulab.com >
Co-authored-by: xun.zhang <xun.zhang@bambulab.com >
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com >
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com >
Co-authored-by: jianjia.ma <jianjia.ma@bambulab.com >
Co-authored-by: liz.li <liz.li@bambulab.com >
Co-authored-by: tao wang <tao.wang@bambulab.com >
Co-authored-by: Stone Li <stone.li@bambulab.com >
Co-authored-by: zhou.xu <zhou.xu@bambulab.com >
Co-authored-by: Bastien Nocera <hadess@hadess.net >
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com >
2024-04-28 22:58:47 +08:00
