e8cb1f4528
Slight addition to avoid_crossing_perimeters tooltip
2013-01-28 10:42:24 +01:00
721b61e798
Require Boost::Geometry::Utils 0.06
2013-01-28 00:34:09 +01:00
2963e54d21
Use the faster polygon_multi_linestring_intersection()
2013-01-28 00:32:19 +01:00
ae201c8f41
Optimization: avoid calculating square roots if not needed
2013-01-28 00:18:55 +01:00
6cb891f2db
Use Boost::Geometry::Utils for Douglas-Peucker
2013-01-28 00:09:19 +01:00
ddaeaa7591
Fix last_pos shifting and add unit test
2013-01-27 13:08:13 +01:00
ad48fdc7f9
Fix external motionplanner too
2013-01-27 12:48:16 +01:00
f1230312e3
Fixes for merge issues
2013-01-26 23:55:47 +01:00
61b164b539
Merge branch 'master' into avoid-crossing-perimeters
...
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/Print.pm
2013-01-26 21:45:17 +01:00
4c62c1b570
Support .gco extension too. #957
2013-01-26 21:40:20 +01:00
bc61656057
harmless misplaced semicolon
2013-01-26 09:31:28 -08:00
599d76b70b
avoid DBus related crash on Ubuntu #954
...
An undocumented feature of Net::DBus->session() is that it returns
the same connection object it creates the first time it's called for
all subsequent calls. Somehow this exposes us to a bug where unref()
is called on that object too many times, causing a segfault.
Undefining the cached object after we've used it once avoids this.
2013-01-25 12:29:44 -08:00
18280da1b3
Bugfix: the non-manifold warning was spitting out wrong coordinates
2013-01-25 18:02:01 +01:00
f555a1ecc2
Replace 'Less' with 'Fewer' in plater. #944
2013-01-23 19:16:57 +01:00
94bb1e54bb
Raise max temperatures (in GUI) to 400°C
2013-01-23 11:10:46 +01:00
65ef3b35d9
limit layer requests to object->layer_count when preparing skirt #901
...
Each object on the plater was being queried for points for
producing the skirt for all skirt layers, even when the object was
shorter than the skirt.
layers of the print
2013-01-18 08:36:01 -08:00
09bdd2ea5d
Bump version number
2013-01-17 17:44:56 +01:00
71052433de
Releasing 0.9.8
2013-01-17 15:50:45 +01:00
73c70021df
Change toolchange and G92 E0 order for makerbot and sailfish G-code flavors. #855
2013-01-17 15:02:40 +01:00
177347137f
New G-code flavor for Sailfish (thanks to fros1y for working on it). #826
2013-01-17 14:56:31 +01:00
8001059390
Add Mike Sheldrake in the About window
2013-01-17 14:13:25 +01:00
92feebf5fe
Fixed regression introduced in 4d8757bf5d causing crash during support material generation
2013-01-17 12:32:57 +01:00
4d8757bf5d
Interface support layers were clipped badly. Also, reduce simplification of the clipping boundaries. #583
2013-01-17 11:59:14 +01:00
4fc6fc5ab6
Increase default value for retract_length_toolchange
2013-01-17 11:51:00 +01:00
0ddd6d9e55
Require Math::Clipper 1.17
2013-01-17 11:11:22 +01:00
954520cba5
Enable cooling by default
2013-01-17 10:40:45 +01:00
ecc7e4560e
Don't fill gaps if fill density is 0. #915
2013-01-17 10:39:05 +01:00
f3a1221039
per-thread clipper object for parallel support generation #888
2013-01-16 06:00:04 -08:00
241dff00e2
Merge branch '834-every-n-fill-frags' #834
2013-01-16 02:24:47 -08:00
85934e1738
use infill flow spacing, not perimeter, for combine_infill() clip offsets
2013-01-15 22:13:11 -08:00
4bff4d0d50
Ignore perimeter_acceleration and infill_acceleration if their values are 25 and 50 to handle legacy configs gracefully.
2013-01-15 12:52:22 +01:00
bce3e96210
extraneous fill against sloped walls with fill every N layers #834
...
Polygons used for N x depth fill surfaces need to be offset
by flow spacing before they are reused to clip lower fill surfaces.
Otherwise thin fill sections remain on clipped layers against sloping
walls, and the N x depth fill collides with them.
2013-01-14 21:18:31 -08:00
68fc91d854
offset miter limit to 3 - 801 828 836 851 875 - spikes and pimples
...
Was set to 10 to address 801. Setting to 3 has the same effect for 801,
and avoids spike artifacts that are likely causing "spike and pimple"
problems in the referenced issues.
2013-01-13 02:50:49 -08:00
ad9be0e4d7
Bugfix: crash when reading/writing files to paths containing non-ASCII characters on Windows. #651 #865
2013-01-13 10:18:34 +01:00
48e00a4c40
Merge branch 'master' into avoid-crossing-perimeters
...
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/GUI/Plater.pm
lib/Slic3r/Print.pm
lib/Slic3r/SVG.pm
2013-01-12 19:00:18 +01:00
73aae07e74
842, 847 slightly enlarge a clip polygon to counteract integer truncation
...
Geomery in referenced issues triggered Clipper problems, but also
pointed to a situation where integer truncation (as coordinates pass
into Clipper) might be shrinking a clip polygon in a way that leaves
degenerate or unwanted thin clip results. Growing the clip polygon by 2
is expected to overcome any issues caused by truncation of floats.
2013-01-11 10:15:42 -08:00
3d03faf0b2
Remove leftover M501
2013-01-10 17:19:38 +01:00
32fd58d531
Acceleration control. #185
2013-01-10 15:29:40 +01:00
34e047205a
Automatic detection of support material threshold angle
2013-01-02 19:40:48 +01:00
cbd298bc36
Alter extrusion width automatic calculation to take "native flow" into account
2013-01-02 19:22:51 +01:00
30d9b2e508
Refactoring: initialize all layers at once and avoid duplication of slicing height math. #637
2013-01-01 23:28:48 +01:00
1774143011
Bugfix: PlanePath fill patterns were not working anymore. #880
2012-12-31 14:11:36 +01:00
141a8d3989
Bugfix: some holes being closed incorrectly. #858
2012-12-30 17:57:30 +01:00
6e6bc74636
Added failing test case for troubleshooting unexpected filled holes. #858
2012-12-30 16:27:20 +01:00
0da71dbdfa
Fix regression causing wrong number of solid shells when using fill_density = 0 (includes regression test)
2012-12-23 20:20:17 +01:00
e59ed7efb7
New toolchange_gcode option. #547
2012-12-23 16:29:08 +01:00
15f07197d8
Don't store ->surfaces anymore. Save memory, save time
2012-12-22 23:57:39 +01:00
5930267de9
Bugfix: some top/bottom solid shells are not treated as solid. #689
2012-12-21 20:25:48 +01:00
8cd8e8b209
Merge branch 'test-dual-retraction'
2012-12-21 15:23:07 +01:00
dc4ada2374
Fix retraction tests and fix retract_extra_length and lift in multiple extruders environments
2012-12-21 15:14:44 +01:00
