* Update_list.txt+OrcaSlicer.pot
I have added missing files for gettext. These files fill in the missing translation strings for Connection / Physical Printer (Obico, SimplyPrint, Flashforge)
src/slic3r/Utils/Obico.cpp
src/slic3r/Utils/SimplyPrint.cpp
src/slic3r/Utils/Flashforge.cpp
src/slic3r/Utils/NetworkAgent.cpp
src/slic3r/GUI/Jobs/OAuthJob.cpp
src/slic3r/GUI/BackgroundSlicingProcess.cpp
* Update Polish translations
* Update OrcaSlicer_pl.po
* Fixing a string_update PrintConfig.cpp
Fixing a string in the PrintConfig.cpp file
The string that hasn't been translated in printer settings
"Disable generating of the M73: Set remaining print time in the final gcode"
* fix_upd
* update_OrcaSlicer_pl.po
* Make httpserver more generic and reusable
* Add OAuthJob
* Fix issue caused by the fact that the backing widget of the `TextCtrl` is no longer `wxTextCtrl`
* Implement login and token refresh
* Implement file upload
* Try fix build error
* Support BBL printers
* Show error message if user hasn't done OAuth
* Fix typo
* Update error message
* Disable unsupported options when SimplyPrint is selected
* Change ensure_vertical_shell_thickness to enum value type. Allow users to turn off this feature completely
* add warning to the tooltip for None option
* Allow apply scarf joint seams to perimeters without sharp corners only
* 1. Fix an error when detect whether a loop is smooth
2. Expose scarf_angle_threshold to UI
* fix linux build error
* minor code changes
* Support slowdown speed for scarf joint only
* update tips
* improve the logic a bit
* Fixed a bug that scarf speed may not respected for overhangs
* Add a new scarf flow ratio option
* Remember z of previous layer
* Support travel to middle of the layer z
* Support sloped extrusion
* Implement sloped seam
* Reduce extra movements
* Don't clip loop if sloped seam is enabled
* Fix wipe
* Ensure `slope_max_segment_length`
* Add options
* Limit slope length to perimeter length
* Fix slope segmentation
* Rename the option to scarf joint seam
* Don't modify the slope option when turning on spiral vase
* Add a few suggestions when turnning on scarf joint
* Add option to add scarf joint to inner walls
* Apply seam gap at the end of the slope
* Add option to explicitly use the entire loop as scarf length
* Fix layer number
* Increase default scarf length to 20mm
* Better way of storing the global scarf state
* Better vase mode layer height recognition
* Move id should exclude seams
* Fix slope height with independent support layer height
* Fix linux build
* Allow controlling the scarf with modifier
* Scarf start height default to 0
* Allow enable scarf seam on contour only
* Fix type error
* Move the creation of sloped loop into ExtrusionEntity.cpp
* Fix error "vector too long"
* Detect seams properly
* The correct way of calculating the rate limit
* The correct way of calculating the rate limit
(cherry picked from commit 05961f7c98803a42871b8df855bfff6a102936c4)
* Add pressure equalizer in print by object mode
* Remove the settings recommendation as it varies a lot depends on printer & filament
* Add a beta suffix
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* A *lot* of import fixes for flatpak
Aside, thank you @hadess for the majority of these fixes. You are the
base point for a lot of issues fixed during the creation of this
flatpak.
* Use slic3r::load_string_file
Boost 1.84 removed `boost::fs::load_string_file` so use the func located
in Utils.hpp
* first impl
* Properly handle extra bridges in `detect_surfaces_type()`
* Pass `perimeter_spacing` and `ext_perimeter_width` as parameters instead of instance property
* Make `process_no_bridge()` private
* Attempt to run `process_no_bridge()` in arachne
* Update `BridgeDetector::coverage` to give us more precise bridge coverage
Co-authored-by: supermerill <merill@free.fr>
* Fix bridge infill margin scaling
* Rename the option name as well as add tooltip
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: supermerill <merill@free.fr>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* FIX: the logic of buried points that were not buried
JIRA: none
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: Id95174659c5fce7feba409eb5e14916608745fa4
* ci: update network module based on commit bc7ca98
Change-Id: I923526f0bf9ce5a288144fa1f9b0f2fc640f41b7
* Fix Firefox
Co-authored-by: hadess <hadess@hadess.net>
* FIX: cali: custom created filament from AMS displayed as incompatible
jira: new
remove the condition: is_system
Change-Id: Ib1366966bbdbe01bc9e2483d9914d270ebefa976
* FIX: duplicated items in comboBox at calibration completed page
jira: new
Change-Id: I4749a2206df16c438e0d3098e36274b2a20f313e
* ENH:update support for P1S plus
jira:[for p1s plus]
Change-Id: Id577d4e94e2162cb0045d261dfaa5f396ecded2f
* ENH: CLI: add mk information support
JIRA: no jira
Change-Id: Idd89b143d439de50d9f52eb8aec95b262d66875d
* ENH:calibration support p1p plus
jira:[plus]
Change-Id: Ia290d3a8a8b9adaac7a6ee26d9a8b5ea0c1b3aee
* FIX: add log for base_id and filament_id
github: #3087
Change-Id: Iebfbd0f224fce49f33fc81c71e6108f6e3abb5ff
* FIX: sync whole preset vendor directory
Change-Id: I191dbe979a87ff35d38cab1149b7975664344838
Jira: STUDIO-5534
(cherry picked from commit 628866608116336453804aa1217dd55db04d47ad)
* FIX: use t_utc for debug only
Change-Id: Ia05d8969d4de3dd38908980d6e17a3ebb11ca279
Github 3045
Change-Id: I77935df53bbf2772b1146e5c330c537165a3a2e6
* FIX:make sort_volumes right
Jira: STUDIO-5645
Change-Id: If324c9115bfaaf0c1b7b4be7c7ee96ba6b8ac890
* ENH:keep an unload logic
jira:[for unload]
Change-Id: Id30ec71ffa5b2dac89346ea47ca48a62479e3ab1
* FIX: several problems with mesh boolean
1. Cut with multiple volumes are OK now.
2. Close mesh boolean fail error with new object or open object
3. Fix wrong name and config of boolean resulting object
github: #3118
jira: none
Change-Id: If2c9dbfb36cbdfe4917a2371217923891bb7909c
(cherry picked from commit 982c0ecb92cf7c2b5ae5972ab900a6b10e7dda50)
* NEW:limit the length of project name
jira:[project name]
Change-Id: I955620f7073b3b7fda280d1118524f561d047751
* ENH:adjusting the warning level of timelpase
jira:[STUDIO-5662]
Change-Id: I4902b22d316f5e09a97a62c88b8a98e55c405434
* FIX: 3mf specification: change namespace form slic3rpe to BambuStudio
Jira: XXXX
Change-Id: Id705affc875ef23fdf2ac6d79f0cb0aafc4f7050
* NEW: Open MakerWorld With BambuStudio GetParam
JIRA: none
Change-Id: I0d65b364f1cd2d634a88882ab072c3e61ea89167
(cherry picked from commit 8eaf45e5359439a7c796fd79876c86775abcf48e)
* FIX: Filament issue generated when creating a printer
Jira: XXXX
Change-Id: I976770b69b47641bd54aa7a9c56fba7f58d1ab68
(cherry picked from commit ba42188b93c58b3954234d72acdd9769a68e3d3c)
* FIX: Blank page appears when editing presets
Jira: 5563
Change-Id: I4c49e05515b1beff55991e92f8079c4499c27eab
(cherry picked from commit e86517d290f4cd0765a230d811b0ddf2c9f34c17)
* FIX: context menu didn't update UI
jira: STUDIO-5691
Change-Id: Ia66b8623d832eba805aff5320941233a68ff258b
* FIX: crash of "filling bed"
"get_arrange_settings() const" gets trapped in infinite recursive calling.
Now we delete this function.
jira: STUDIO-5688
Change-Id: Ia39974734bb37b2a2f06b5bf78185f01be726872
* FIX: boolean hangs in the middle of color painting
Can't do splits in combine_mesh_fff, as do_boolean of mcut will split meshes.
jira: STUDIO-5693
Change-Id: Idddb7d20dd7ca386c39ddd3d87d9defc3136aa5d
(cherry picked from commit 6c67d015941458e37faaf0015b6509b5a0eadc0e)
* Fix: Fix a number of compilation problems
issues found when using gcc version 13.2.0 (GCC) in a Flatpak sandbox
github : https://github.com/bambulab/BambuStudio/issues/3074
github pull request: https://github.com/bambulab/BambuStudio/pull/3096
Change-Id: I08aeac593eb1ce7675894df72e8489200bae713d
(cherry picked from commit 069d133d66bfa682de4a860e379d5dc16b3d907c)
* fix: macos icns issue when icon was not attached
github pull request:https://github.com/bambulab/BambuStudio/pull/3116
Change-Id: I49072ad49f3af7669a6d307c791594ade210da50
(cherry picked from commit c977e5582e3a30ad16dd267810037423aad9a53c)
* FIX: Add flush_length for change_filament_gcode
Change-Id: I30f4b97d3d61c2a57f0e92f157cbd31c38aa7265
Jira: XXXX
(cherry picked from commit 92eb2bac977a0c4095b316cbbc6580fb5228b710)
* FIX: edit preset dialog can't close on mac
Jira: 5696
Change-Id: Ib33dfd07cc588ddd3805e3490a4d8c36dcd890ac
* ENH: add dev_ota_version in ssdp
JIRA: STUDIO-5740
Change-Id: Ic80e6d4b9bf82813fdc4a76604a3d36213d12b03
Signed-off-by: Stone Li <stone.li@bambulab.com>
* NEW:Adapt to multicolour and gradient colour
JIRA:xxxx
Change-Id: I8084cab603d5681cbcaf2d6f5e0d7ad5419cb2af
* NEW:Adaptation of semi transparent materials
JIRA: XXXX
Change-Id: Ie32d8ce67c37b85eb6d7d6594cb514a696307e68
* FIX: disable flush options if prime tower is unchecked
jira: STUDIO-5639
Change-Id: I25081584d430bc7d062e14bcc2cdbf7522cf9d99
* ENH: refine GetVersion for HMS query
JIRA: STUDIO-5763
Change-Id: Ia3ccc07d79cc0736eb12e9782da50211abb74772
Signed-off-by: Stone Li <stone.li@bambulab.com>
* FIX: Prefer old selection when sync AMS not compatible
Change-Id: I6b18db51887132a997cf78d70fff9a92e23bc44a
Jira: STUDIO-5416
(cherry picked from commit 077fae29823cf4f3071d408b1b40f55ee0cb33c6)
* FIX: The flushing was not auto-calc when sync ams list
JIRA: STUDIO-5551
1. flushing volume auto-calc when sync ams list
2. flushing volume takes the larger calculation value when filament has
multi-colors
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I72e6f9780ea56103a44c2da6068440a4615c254d
* FIX:fixed invalid links
jira:[fixed link]
Change-Id: I036a38b6e8e94da762f93805bd7be706538771fe
* FIX: Prompt to delete problematic presets
Jira: XXXX
Change-Id: Ic43f7bb782794d7ab0b6acbffbb5d73e94f6ed73
* FIX:fixed incorrect HMS content
jira:[STUDIO-5818]
Change-Id: Ia2896d6f0ab1ffedbc850e54168acece8e47bdbb
* FIX:external transparent material display error
JIRA: STUDIO-5845
Change-Id: I0a4f05ac5d5c0ac49d85a704ee65a7221c5f1e1d
* FIX: [5846] Custom Filament Page show System Filament
Simultaneously solve: When downloading Preset from the cloud, the filament_id of the preset in m_preset is null.
Jira: 5846
Change-Id: I6ba1b46fe92e345614b6a4af3fffa87d81fa2456
* FIX:A1 and p1 series do not support custom materials
JIRA:XXXX
Change-Id: Ib0459273d1f9a7152a5563757204634a8d0cd6f5
* FIX: exception when comparing profiles
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I946b5fcd35f779d271df2b3de731fdcada5aab29
(cherry picked from commit 00e739570812e5c4be3e0f7702ce8c72c0f9e72b)
* FIX: hide_id_middle_string
Change-Id: I28f32ec526b443d31d7992971b80ab1cb737deb6
Github: STUDIO-5825
* ENH: modify some logs level
JIRA: STUDIO-5958
Change-Id: I5a8592dfb8ffa9a81952535cb30944f867aa0e22
Signed-off-by: Stone Li <stone.li@bambulab.com>
* NEW:build plate marker detect
Change-Id: I70f03efea688bb6ce71c3f5990bb3c50605ab184
* FIX: Studio UI Freeze when saving user preset
github: #3335
Change-Id: Idaf53f673a3e46408826c06bdde2c592395d358b
* update bbl plugin version
* fix build errors
* update bbl profiles
* update color
---------
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Signed-off-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: gerrit <gerrit@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: Bastien Nocera <hadess@hadess.net>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: hu.wang <hu.wang@bambulab.com>
Co-authored-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: XunZhangBambu <xun.zhang@bambulab.com>
* Allow reordering objects regardless of print seq
* Add option to control the layer print order
* Sort object by their order in object list instead of id
* Show print order when print order is the same as the object list
* Ensure the print order when print order is same as object list
* Update option name
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* [FEATURE] Experimental small area flow compensation
This is a native implementation of the [Small Area Flow Compensation](https://github.com/Alexander-T-Moss/Small-Area-Flow-Comp)
post-processor by Alexander Þór for OrcaSlicer.
Quite often small areas of solid infill appear to be over-extruded, despite
the rest of a print looking like it has a well-dialled-in EM/Flow. Currently,
there isn't a good understanding of why this happens, so this is an attempt
at a brute-force approach to treat the symptom.
This feature modifies the flow of extrusion lines inversely proportional to
the length of the extrusion line (the shorter the extrusion, the less flow
it should have).
Alexander Þór: Author of the original script implementation
Weaslus: Proof Reader, Hypeman & pestered folks into making this
* [TASK] Whitespace cleanup
* [TASK] Add credits, format code, improve input labels
* [TASK] Use multi-line textbox as input for flow model
* [TASK] Toggle flow compensation per object
* [TASK] Enable flow compensation for first layer
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* ENH: Enabled gap fill algorithm for all solid fill types
* Made gap fill an option & refactored code into its own method
* Code comment updates
* Converted gap fill to enum and control filter out gap fill in the UI
* Update label for consistency
* Spelling mistake
* ENH: Improve internal bridge detection for sloped surfaces
* Moved lightning detection out of the parallel threads
* Naming conventions
* Revised approach - use reduced expansion multipliers
* Further reduce filtering, flagged option as experimental
* Corrected code comment
* Updated tool tip
* Introduced filtering drop down option
* add feature to add configurable value to clean/remove short un-closed walls/perimeters, to improve print times and reduce stringing (and generally lead to a cleaner print).
* fixes to short wall removal, which no longer affects bottom or top surfaces. allowed adjusting Top-surface threshold (renamed from One wall threshold for clarity) when short wall removal value is configured above default of 0.5.
* small fix for toggle_line for min_width_top_surface, to only be visible if min_length_factor > 0.5 and arachne is enabled.
* Use copy of input_params
* revert `One wall threshold"` string change
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Orca: Added option to use CMake config option ORCA_CHECK_GCODE_PLACEHOLDERS to check custom gcode placeholders rather than using debug
Original Commit: prusa3d/PrusaSlicer@b8bb7f2
Co-authored-by: YuSanka <yusanka@gmail.com>
