* Get libslic3r tests closer to passing
I can't get geometry tests to do anything useful. I've added extra
output, but it hasn't helped me figure out why they don't work
yet. That's also probably the last broken 3mf test doesn't work.
The config tests were mostly broken because of config name changes.
The placeholder_parser tests have some things that may-or-may-not
still apply to Orca.
* Vendor a 3.x version of Catch2
Everything is surely broken at this point.
* Allow building tests separately from Orca with build_linux.sh
* Remove unnecessary log message screwing up ctest
Same solution as Prusaslicer
* Make 2 TriangleMesh methods const
Since they can be.
* Move method comment to the header where it belongsc
* Add indirectly-included header directly
Transform3d IIRC
* libslic3r tests converted to Catch2 v3
Still has 3 failing tests, but builds and runs.
* Disable 2D convex hull test and comment what I've learned
Not sure the best way to solve this yet.
* Add diff compare method for DynamicConfig
Help the unit test report errors better.
* Perl no longer used, remove comment line
* Clang-format Config.?pp
So difficult to work with ATM
* Remove cpp17 unit tests
Who gives a shit
* Don't need explicit "example" test
We have lots of tests to serve as examples.
* Leave breadcrumb to enable sla_print tests
* Fix serialization of DynamicConfig
Add comments to test, because these code paths might not be even used
anymore.
* Update run_unit_tests to run all the tests
By the time I'm done with the PR all tests will either excluded by
default or passing, so just do all.
* Update how-to-test now that build_linux.sh builds tests separately
* Update cmake regenerate instructions
Read this online; hopefully works.
* Enable slic3rutils test with Catch2 v3
* Port libnest2d and fff_print to Catch2 v3
They build. Many failing.
* Add slightly more info to Objects not fit on bed exception
* Disable failing fff_print tests from running
They're mostly failing for "objects don't fit on bed" for an
infinite-sized bed. Given infinite bed is probably only used in tests,
it probably was incidentally broken long ago.
* Must checkout tests directory in GH Actions
So we get the test data
* Missed a failing fff_print test
* Disable (most/all) broken libnest2d tests
Trying all, not checking yet though
* Fix Polygon convex/concave detection tests
Document the implementation too. Reorganize the tests to be cleaner.
* Update the test script to run tests in parallel
* Get sla_print tests to build
Probably not passing
* Don't cause full project rebuild when updating test CMakeLists.txts
* Revert "Clang-format Config.?pp"
This reverts commit 771e4c0ad2fdbaa26a8fee77030650afacdc5083.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
This pull request updates GitHub Actions workflow files to explicitly
set permissions for certain actions. (fixing the permissions issues)
**Workflow permissions updates:**
* Added explicit `issues: write` permission to the `assign.yml` workflow
to ensure it can modify issues as needed.
* Set `contents: write`, `actions: write`, and `checks: write`
permissions in the `build_all.yml` workflow to allow the workflow to
interact with repository contents, manage actions, and update checks.
* Add script with VS version auto detection
* Add msvc145 toolset support
* Fix issue when build slicer only
* Fix vs2026 OpenCV build
* Set github action to use new build script
* Get vs version from `msbuild --version` so it works for github action
* Actually build tests on Linux and allow RelWithDebInfo
They weren't being built.
Also cleaned up --config flags which enables RelWithDebInfo on Linux,
now that Ninja Multi-Config is used, it's quite trivial.
* Remove obsolete Slic3r Perl tests
The directory doesn't exist, they're already gone.
* Add GH job for running unit tests
* Move unit test execution to script and upload test results
* Don't run scheduled builds on forks
* Only deploy from SoftFever/OrcaSlicer
Will stop failures on forks
* Use artifact instead of cache
* Tweak archive and checkout paths
Keep getting error:
```
/home/runner/work/_temp/902d0a0a-6d23-4fe0-a643-8b5cc4efd25b.sh: line 1: scripts/run_unit_tests.sh: Permission denied
```
That seems to be because I didn't use actions/checkout, the working
directory is never setup correctly? So using checkout to get scripts
directory. Unsure if archive will preserve the `build/tests/` prefix;
will find out soon.
* Use tar to package directory and write results to correct directory
Tar preserves filenames and directory structure
* Use tar -xvf not -xzf
Muscle memory failed me
* Add testing wiki page
* Save test logs on failure and choose correct directory for junit
* Consolidate apt install steps, use for unit tests too, disable non-Linux builds
Temporarily disable non-Linux builds to save time while developing
this.
Cache the apt packages to save some time searching apt and downloading
them again (though I realize this is also downloading, but hopefully
by something closer and faster).
Remove all the redundant packages listed in the workflow and debian
distribution lists.
* Remove apt install steps from workflow
`./build-linux.sh -u` is supposed to install all needed packages, so
it should build without needing anything besides that. If I'm wrong
this commit will be dropped.
* Need composite action checked out locally
* Re-enable non-Linux builds now that it's working
* Skip a deploy and a notarize in forks
They only succeed in the main repo.
* Fix multi-build for non-Release builds: share CONFIG
* Correct build errors in unit tests
Indeterminate method signatures resolved. Updated script to build all
the tests.
* Fix -g vs -e for RelWithDebInfo
* Change CONFIG->BUILD_CONFIG
Missed one in prior commits
* Reduce wasteful redundant build artifact copies
1. Don't copy the artifacts and leave them; make a hard link first;
only make a copy only while creating AppImage.
2. Don't tar up the `package` directory; nothing uses this tar AFAICT
* Fix directory name
* Change jigsaw auth test URLs to httpbin.org
No idea why the basic auth doesn't work, but it doesn't work for
`curl` CLI either. This does.
* Remove force-build
It got reverted at
e3f049829b
for unknown reasons.
* Add timeout for unit tests in GitHub Actions workflow (#11146)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Auto generate CMAKE_PREFIX_PATH/DESTDIR
* Auto set CMAKE_INSTALL_PREFIX
* Always default SLIC3R_STATIC to on
* Only allow one value for CMAKE_OSX_ARCHITECTURES
* Set arch for OpenSSL from CMAKE_OSX_ARCHITECTURES
* Set CMAKE_INSTALL_RPATH from CMAKE_PREFIX_PATH
* Default CMAKE_MACOSX_RPATH and CMAKE_MACOSX_BUNDLE to on
* Auto set BBL_RELEASE_TO_PUBLIC based on build config
* Default to GTK 3
* Fix linux debug build
Update find modules to also look for the debug variant of the libraries
* Set DEP_DEBUG and ORCA_INCLUDE_DEBUG_INFO based on CMAKE_BUILD_TYPE
* Add a fallback value for Windows SDK if the env variables are not set
* Reflect CMake changes in the build scripts
* Add missing line
* Fix auto setting DEP_DEBUG and ORCA_INCLUDE_DEBUG_INFO
* Update dep folder name for linux in GH actions
* Invert dep-folder-name conditions
`''` is considered a falsy value, which was causing the value to always be set to 'OrcaSlicer_dep'
* Properly handle finding the debug version of libnoise
* Convert FindNLopt.cmake to a config mode wrapper
* Use separate build directory for debug builds on Linux
* Move find_package for libnoise
* Cleanup and improve linux build script
- Add dry run
- Add build in RelWithDebInfo
- Add function to print and run commands
* Remove linux destdir deprecation and cleanup
* Fix flatpak build
* Disable fail fast for flatpak builds
* Flatpak improvements
- Build wxWidgets using deps cmake
- Improve handling of space freeing commands while building deps
- Allow cmake to directly download deps
- Set needed flags within cmake instead of the build manifest
* Print clean build commands
* Implement shellcheck recommendations
* Cleanup
* Fix CMakeLists.txt syntax by replacing empty elseif with else statement
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Refactor DMG creation process in build workflow
* Update the OrcaSlicer DMG creation steps to exclude the profile validator helper from the main DMG.
* Introduce a dedicated directory for the main OrcaSlicer DMG and the profile validator DMG, ensuring a cleaner build process.
* Use symbolic links with the `-sfn` option to avoid issues with existing links.
This change enhances the organization of the build artifacts and improves the clarity of the DMG creation process.
* Add a once-daily Build All which skips caches
When an external dependency breaks a build, ensures a record exists of
it happening.
Half of #10404
* `inputs` is plural
* Shellcheck all shell scripts
* Implement Shellcheck's recommendations
* Shellcheck the distribution-specific files
* Include the distro scripts to trigger action
* Fix array usage (hopefully)
* Use single-quote string
TIL: single quote string in yaml treats everything as literal, but
double quote allows backslash escaping.
* Make all cmake commands use set+-x dance and fix macos getopts line
Make Claude happy
getopts has colon after a command which takes an argument
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
