This PR adds a new filament sync mode setting for device-based filament synchronization.
Users can now choose between syncing both filament preset + color (current behavior) or syncing color only, so calibrated local filament profiles are preserved while still updating slot colors from the printer.
It also includes small UI improvements for the new preference entry and sync status messaging.
<img width="665" height="671" alt="image" src="https://github.com/user-attachments/assets/23980846-0113-48ab-84aa-adf5cdab8ab6" />
* Add checks to snap wipe tower back to origin when it was loaded outside the plate boundary
* Fix Wipe Tower preview outside plate boundary and warning notification
- snaps wipe tower preview to nearest edge if it was loaded outside of plate boundary.
- Added warning notification to notify position change
# Description
Transforming internal 3D Files to DRC to reduce orca size
## Calibs
(Not counting temperature_tower)
Original 6,01 MB
Converted 1,57 MB
- Mesh (STL/3MF) to LossLess DRC
- SCV-V2 116kb -> 15kb
- fast_tower_test 66kb -> 9kb
- ringing_tower 172kb -> 22kb
- pressure_advance_test 124kb -> 16kb
- tower_with_seam 2kb -> 1kb
- retraction_tower 1.726kb -> 97kb (done at 25, if 0 = 212kb)
- ~~temperature_tower~~ Updated, fixed, wider range and Draco in: #12103 5.075kb -> 485kb
- vfa 1.453kb -> 179kb
- Step
- SpeedTestStructure 1.312kb -> 86kb
- Imported:
- Linear Deflection: 0.002
- Angle Deflection: 0.25
- Exported as LossLess DRC
## Handy Models
Original 4,66 MB
Converted 1,53 MB
- STL/3MF to LossLess DRC (Maybe reduce the bit depth???)
- 3DBenchy 2.417kb -> 570kb (done at 25, if 0 = 1.340kb)
- calicat 43kb -> 6kb
- ksr_fdmtest_v4 128kb -> 74kb
- Orca_stringhell 63kb -> 37kb
- OrcaToleranceTest 758kb -> 94kb
- Stanford_Bunny 755kb -> 187kb (done at 25, if 0 = 316kb)
- Voron_Design_Cube_v7 34kb -> 21kb
## Bit used
After some test with a lot of models and all possible combinations it's safe to say that >20 is BondingBox and mm3 volume the best it can.
So i used 25 just as a safe value in:
- Stanford_Bunny
- 3DBenchy
- retraction_tower
<img width="324" height="499" alt="imagen" src="https://github.com/user-attachments/assets/bb5000cf-c1fa-4153-af2f-691ea59bc254" />
<img width="324" height="499" alt="imagen" src="https://github.com/user-attachments/assets/f38e3528-0d05-4621-984e-f107a0eec91e" />
## MultiPart 3MF
Didint change them, too much trouble for small changes.
## Problem
Some Creality printers (e.g. Ender-3 V3 SE) rely on metadata comments in the first lines of G-code files to display print info on the screen (estimated time, filament usage, layer height). This follows a format originally used by Cura/Creality Print:
```
;FLAVOR:Marlin
;TIME:3708.97
;Filament used:6.21m
;Layer height:0.2
```
OrcaSlicer currently has no way to write content before the `HEADER_BLOCK` in the G-code output, and does not expose `print_time_sec` or `filament_length_m` as usable placeholders. As a result, these printers show zeroed-out print info on screen.
## Changes
### 1. New placeholders (post-processing)
Added two new G-code placeholders resolved during post-processing:
- `{print_time_sec}` — total estimated print time in seconds (double)
- `{filament_length_m}` — total filament length in meters (double)
These values are only available after G-code generation, so they use inline marker replacement (`@PRINT_TIME_SEC@`, `@FILAMENT_LENGTH_M@`) that `GCodeProcessor::run_post_process()` substitutes with actual computed values — the same pattern used by existing M73 and layer count placeholders.
### 2. New "File header G-code" option (`machine_top_gcode`)
Added a new G-code field in **Printer Settings > Machine G-code** that writes content at the very top of the output file, before `HEADER_BLOCK_START`. This allows users to add firmware-specific metadata that must appear in the first lines.
### 3. Creality Ender-3 V3 SE profile update
Pre-configured the Ender-3 V3 SE profiles (all 4 nozzle variants) with a default `machine_top_gcode` value matching the Cura-compatible header format, so print info displays correctly out of the box.
# Screenshots
| Before (current OrcaSlicer) | After (this PR) |
|---|---|
|  |  |
## Tests
- Sliced test model with Ender-3 V3 SE profile
- Verified G-code output contains correct values in first lines:
- `;TIME:` with actual print time in seconds
- `;Filament used:` with filament length in meters
- `;Layer height:` with correct layer height
- Verified `{print_time_sec}` and `{filament_length_m}` work in both Machine Start G-code and File header G-code fields
- Verified empty `machine_top_gcode` produces no extra output
- Built and tested on macOS (arm64)
* added option to save a profile as detached(no inheritance)
* Revert "added option to save a profile as detached(no inheritance)"
This reverts commit c1326c6decd7bae49d2e8e811ae2f477a3b1186a.
* re-commiting the changes
* fixed conflicts with upstream
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add read support for Google's Draco (.drc) format.
* Fix build on Linux
* Use boost instead of fstat.
* Switch to boost memory-mapped file to save RAM and potentially improve performance.
* Trim trailing whitespace.
* Initial Draco write support.
Currently always exports with 16-bit precision and speed 0 (best compression).
The back-end function does have arguments to specify them, it's just not hooked into the GUI.
* Add Draco to the About dialogue.
* Fix Linux compile (hopefully)
* Add an option to associate DRC files on Windows.
* Implement a Preferences option to set Draco position quantization bits
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Some slight changes to ianalexis's suggestion.
* Implement a create_item_spinctrl() function for numeric inputs, and use that instead of create_item_input().
* Move "bits" to inside the spinctrl box.
* Refactor following yw4z's feedback
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Change to 0 bits as the default setting for Draco export precision.
* Change to a lossy checkbox and a bits field with a range of 8-30.
* Proper SpinInput code from yw4z
* Revert "Proper SpinInput code from yw4z"
This reverts commit 7e9c85f31a0d776860690595b71441498c2034d1.
* Revert "Change to a lossy checkbox and a bits field with a range of 8-30."
This reverts commit d642c9bcc0c51b35bf915e04f35d9991c8485ddd.
* Redo preferences based on SoftFever's feedback
* Refactor to minimize code duplication
* Fix padding
* Improve Draco export quality level tooltip clarity
Clarify that 0 means lossless compression (not uncompressed),
document the valid lossy range (8-30), and better explain the
tradeoff between file size and geometric detail.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Closes#11726
# Description
Removed hardcoded 0.2mm layer height.
Now it will stay in with the user process.
Also corrected several config assignments to use print_config instead of obj->config for consistency.
## Note
Didn't change PA PATTERN because i don't know if it may impact the calibration results for this specific test.
Toolchanger printers with 4 tools were incorrectly treated as dual-nozzle (IDEX-style) printers in AMS Sync. So I was locked to just tool 1/2.
Adjusted AMS Sync to use dual-nozzle logic only for true 2-nozzle setups (nozzle_nums == 2 and filament_map in {1,2}), and route 3+ tool toolchangers through the generic mapping flow so all tool IDs are handled correctly.
Before:
<img width="2276" height="1738" alt="image" src="https://github.com/user-attachments/assets/ccebc020-37cf-4af6-8568-a9f331f6c08c" />
After:
<img width="2236" height="1662" alt="image" src="https://github.com/user-attachments/assets/030f49c3-463d-4355-95ba-ba8f95a01ecd" />
Tested on / with:
- Snamaker U1
- ARM macOS
* Fix active filament preset not matching wizard selection on first run
After completing the setup wizard with only a non-PLA filament selected
(e.g. Generic ABS), the active filament preset defaulted to Generic PLA
instead of the user's selection. This happened because load_presets()
falls back to Generic PLA when the initial printer differs from the
preferred printer, and the first_added_filament override was disabled.
Add post-load correction in apply_config() that switches the active
filament to the first compatible wizard-selected filament when the
current active filament is not in the wizard selection. Also fix the
guide JS (22.js, 23.js) to use the filalist attribute for building
the filament array, and add platform-specific build test commands to
CLAUDE.md.
* Replace @System filaments with vendor-specific overrides in wizard
When the wizard selects a generic filament like "Generic ABS @System",
check if a vendor-specific override exists (e.g. BBL "Generic ABS")
and use that instead. This ensures printer-tuned profiles are preferred,
preventing load_installed_filaments from adding unwanted BBL defaults.
When printers from the default bundle are also selected, both variants
are kept since those printers need the @System version.
Also adds diagnostic logging for filament loading in LoadProfileFamily.
* Guard against persisting presets for Default Printer and fix filament override logic
Prevent export_selections from saving stale preset settings for the
built-in "Default Printer" placeholder, which is only the initial state
before a real printer is loaded. Also require a non-default vendor printer
to be selected before replacing @System filaments with vendor-specific
overrides in the wizard, avoiding incorrect filament substitution when
only the default bundle is present.
* Add overhang_reverse config to calibration routines
Set the 'overhang_reverse' configuration option to false in both calib_temp and calib_retraction functions to ensure consistent calibration behavior.
* Disable overhang_reverse in calib_pa function
Adds a line to set the 'overhang_reverse' configuration option to false when running the calib_pa function, ensuring this feature is disabled during calibration.
* Disable reverse on even for PA Tower
* Remove unncesary overhang_reverse disablers
* Update Plater.cpp
Update Plater.cpp
* Update Plater.cpp
Changed the help link for the 'symmetric_infill_y_axis' option from 'strength_settings_patterns#zig-zag' to 'strength_settings_infill#symmetric-infill-y-axis' to provide more accurate documentation.
# Description
When creating a new filament preset and setting the Printer Dependencies to "All", the preset does not save this setting. This issue only occurs on creation due to code that is meant to validate the data to prevent a case where the filament is compatible with none of the printers.
EDIT: While I considered redoing the data validation for this tab overall, I have now preserved the original purpose of the code, which is to add the current printer as a compatible printer only if:
- the base preset is a System preset
- the user has not specified any compatible printers
Notably, this seems to be the cause of #11959
Moving the data validation from `Preset::save_current_preset` to `Tab::save_preset` allows the Preset function to be simplified through removal of the current printer parameter.
# Screenshots/Recordings/Graphs
There is no visible change on the UI.
## Tests
Tested the following combinations of filament presets:
- System->new User
- User->new User
- User->same User
Tried to set them to All, where the System->new User should be the only case where this is replaced by a default.
In any case where there are printers already set, those settings should be kept.
* Fix: GCodeViewer displaying inconsistent data in title and body
* Fix: remove actual flow info from GCodeViewer title
* Refactor: reduce repetition of N/A and headers
