{
    "type": "filament",
    "name": "Bambu TPU 85A @BBL H2D",
    "inherits": "Bambu TPU 85A @base",
    "from": "system",
    "setting_id": "GFSU04_02",
    "instantiation": "true",
    "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
    "filament_deretraction_speed": [
        "10",
        "10"
    ],
    "filament_flow_ratio": [
        "1",
        "1"
    ],
    "filament_long_retractions_when_cut": [
        "nil",
        "nil"
    ],
    "filament_max_volumetric_speed": [
        "2.2",
        "2.2"
    ],
    "filament_retract_before_wipe": [
        "nil",
        "nil"
    ],
    "filament_retract_restart_extra": [
        "nil",
        "nil"
    ],
    "filament_retract_when_changing_layer": [
        "nil",
        "nil"
    ],
    "filament_retraction_distances_when_cut": [
        "nil",
        "nil"
    ],
    "filament_retraction_length": [
        "2",
        "2"
    ],
    "filament_retraction_minimum_travel": [
        "nil",
        "nil"
    ],
    "filament_retraction_speed": [
        "10",
        "10"
    ],
    "filament_wipe": [
        "nil",
        "nil"
    ],
    "filament_wipe_distance": [
        "nil",
        "nil"
    ],
    "filament_z_hop": [
        "nil",
        "nil"
    ],
    "filament_z_hop_types": [
        "nil",
        "nil"
    ],
    "filament_extruder_variant": [
        "Direct Drive Standard",
        "Direct Drive High Flow"
    ],
    "filament_ramming_volumetric_speed": [
        "0.55",
        "0.55"
    ],
    "filament_pre_cooling_temperature": [
        "195",
        "195"
    ],
    "filament_ramming_travel_time": [
        "20",
        "20"
    ],
    "impact_strength_z": [
        "88.7"
    ],
    "nozzle_temperature_range_high": [
        "250"
    ],
    "nozzle_temperature": [
        "225",
        "225"
    ],
    "nozzle_temperature_initial_layer": [
        "225",
        "225"
    ],
    "compatible_printers": [
        "Bambu Lab H2D 0.6 nozzle",
        "Bambu Lab H2D 0.8 nozzle"
    ],
    "filament_start_gcode": [
        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
    ],
    "filament_end_gcode": [
        "; filament end gcode \n"
    ]
}