{
  "type": "machine",
  "name": "fdm_adventurer3_common",
  "from": "system",
  "instantiation": "false",
  "inherits": "fdm_flashforge_common",
  "gcode_flavor": "marlin",
  "printable_area": ["-75x-75", "75x-75", "75x75", "-75x75"],
  "printable_height": "150",
  "machine_max_acceleration_e": ["500"],
  "machine_max_acceleration_extruding": ["500"],
  "machine_max_acceleration_retracting": ["500"],
  "machine_max_acceleration_travel": ["500"],
  "machine_max_acceleration_x": ["500"],
  "machine_max_acceleration_y": ["500"],
  "machine_max_acceleration_z": ["100"],
  "machine_max_speed_e": ["30"],
  "machine_max_speed_x": ["150"],
  "machine_max_speed_y": ["150"],
  "machine_max_speed_z": ["20"],
  "machine_max_jerk_e": ["2.5"],
  "machine_max_jerk_x": ["8"],
  "machine_max_jerk_y": ["8"],
  "machine_max_jerk_z": ["0.4"],
  "printer_settings_id": "Flashforge",
  "retraction_minimum_travel": ["1"],
  "retract_before_wipe": ["100%"],
  "retraction_length": ["5"],
  "retract_length_toolchange": ["2"],
  "retraction_speed": ["25"],
  "deretraction_speed": ["25"],
  "z_hop": ["0.4"],
  "single_extruder_multi_material": "1",
  "enable_filament_ramming": "0",
  "purge_in_prime_tower": "0",
  "change_filament_gcode": "M600",
  "machine_pause_gcode": "M25",
  "default_filament_profile": ["Flashforge PLA"],
  "machine_start_gcode": "M140 S[bed_temperature_initial_layer] T0\nM104 S[nozzle_temperature_initial_layer] T0\nM104 S0 T1\nM107\nM900 K[pressure_advance] T0\nG90\nG28\nM132 X Y Z A B\nG1 Z50.000 F420\nG161 X Y F3300\nM7 T0\nM6 T0\nM651 S255\n;pre-extrude\nM108 T0\nG1 X-37.50 Y-75.00 F6000\nM106\nG1 Z0.200 F420\nG1 X-37.50 Y-74.00 F6000\nG1 X37.50 Y-74.00 E9.5 F1200\n",
  "machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F9000\nM104 S0 T0\nM140 S0 T0\nG162 Z F1800\nG28 X Y\nM132 X Y A B\nM652\nG91\nM18",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "scan_first_layer": "0",
  "thumbnails": "80x60",
  "use_relative_e_distances": "0",
  "z_hop_types": "Auto Lift",
  "wipe_distance": "2",
  "extruder_clearance_radius": "42.3",
  "extruder_clearance_height_to_rod": "24.93",
  "extruder_clearance_height_to_lid": "150",
  "manual_filament_change": "1",
  "nozzle_type": "stainless_steel",
  "auxiliary_fan": "1",
  "parking_pos_retraction": "0",
  "cooling_tube_length": "0",
  "cooling_tube_retraction": "0",
  "extra_loading_move": "0",
  "version": "2.0.2.0"
}