{
  "type": "machine",
  "name": "fdm_adventurer5m_common",
  "from": "system",
  "instantiation": "false",
  "inherits": "fdm_flashforge_common",
  "gcode_flavor": "klipper",
  "printable_area": ["-110x-110", "110x-110", "110x110", "-110x110"],
  "printable_height": "220",
  "auxiliary_fan": "1",
  "machine_max_acceleration_e": ["5000", "5000"],
  "machine_max_acceleration_extruding": ["20000", "20000"],
  "machine_max_acceleration_retracting": ["5000", "5000"],
  "machine_max_acceleration_travel": ["20000", "20000"],
  "machine_max_acceleration_x": ["20000", "20000"],
  "machine_max_acceleration_y": ["20000", "20000"],
  "machine_max_acceleration_z": ["500", "500"],
  "machine_max_speed_e": ["30", "30"],
  "machine_max_speed_x": ["600", "600"],
  "machine_max_speed_y": ["600", "600"],
  "machine_max_speed_z": ["20", "20"],
  "machine_max_jerk_e": ["2.5", "2.5"],
  "machine_max_jerk_x": ["9", "9"],
  "machine_max_jerk_y": ["9", "9"],
  "machine_max_jerk_z": ["3", "3"],
  "printer_settings_id": "Flashforge",
  "retraction_minimum_travel": ["1"],
  "retract_before_wipe": ["100%"],
  "retract_length_toolchange": ["2"],
  "deretraction_speed": ["35"],
  "z_hop": ["0.4"],
  "single_extruder_multi_material": "0",
  "change_filament_gcode": "",
  "machine_pause_gcode": "M25",
  "support_multi_bed_types": "1",
  "default_filament_profile": ["Flashforge Generic PLA"],
  "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F6000\nG1 E-0.2 F800\nG1 X110 Y-110 F6000\nG1 E2 F800\nG1 Y-110 X55 Z0.25 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG1 Y-110 X55 Z0.45 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG92 E0",
  "machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "scan_first_layer": "0",
  "thumbnails": ["140x110"],
  "use_relative_e_distances": "1",
  "z_hop_types": "Auto Lift",
  "retraction_speed": ["35"],
  "wipe_distance": "2",
  "extruder_clearance_radius": ["76"],
  "extruder_clearance_height_to_rod": ["27"],
  "extruder_clearance_height_to_lid": ["150"],
  "version": "1.8.0.0"
}