ab9ad9e844
* Update/add re:3D profiles. * Fix encoding issue with UTF-8 BOM * Change spaces to tabs. * Fix alignment-based space indentation issues. * Test: rename_from property * Test 2: rename_from property * Test 3: use 'renamed' instead of 'rename' * Add renamed property for each conflicting profile. * Revert to optimized assets improved on [#13149](https://github.com/OrcaSlicer/OrcaSlicer/pull/13149)
71 lines
2.0 KiB
JSON
71 lines
2.0 KiB
JSON
{
|
|
"type": "process",
|
|
"name": "fdm_process_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"adaptive_layer_height": "0",
|
|
"reduce_crossing_wall": "0",
|
|
"bridge_flow": "0.95",
|
|
"bridge_speed": "10",
|
|
"brim_width": "5",
|
|
"compatible_printers": [],
|
|
"print_sequence": "by layer",
|
|
"default_acceleration": "0",
|
|
"bridge_no_support": "0",
|
|
"elefant_foot_compensation": "0.1",
|
|
"outer_wall_line_width": "0.4",
|
|
"outer_wall_speed": "25",
|
|
"line_width": "0.4",
|
|
"infill_direction": "45",
|
|
"sparse_infill_density": "15%",
|
|
"sparse_infill_pattern": "crosshatch",
|
|
"initial_layer_line_width": "0.4",
|
|
"initial_layer_print_height": "0.2",
|
|
"initial_layer_speed": "15",
|
|
"gap_infill_speed": "25",
|
|
"infill_combination": "0",
|
|
"sparse_infill_line_width": "0.4",
|
|
"infill_wall_overlap": "25%",
|
|
"sparse_infill_speed": "70",
|
|
"interface_shells": "0",
|
|
"detect_overhang_wall": "0",
|
|
"reduce_infill_retraction": "0",
|
|
"filename_format": "{input_filename_base}.gcode",
|
|
"wall_loops": "3",
|
|
"inner_wall_line_width": "0.4",
|
|
"inner_wall_speed": "40",
|
|
"print_settings_id": "",
|
|
"raft_layers": "0",
|
|
"seam_position": "nearest",
|
|
"skirt_distance": "2",
|
|
"skirt_height": "2",
|
|
"minimum_sparse_infill_area": "0",
|
|
"internal_solid_infill_line_width": "0.4",
|
|
"internal_solid_infill_speed": "60",
|
|
"spiral_mode": "0",
|
|
"standby_temperature_delta": "-20",
|
|
"enable_support": "0",
|
|
"support_filament": "0",
|
|
"support_line_width": "0.38",
|
|
"support_interface_filament": "0",
|
|
"support_on_build_plate_only": "0",
|
|
"support_top_z_distance": "0.2",
|
|
"support_interface_loop_pattern": "0",
|
|
"support_interface_top_layers": "2",
|
|
"support_interface_spacing": "0",
|
|
"support_interface_speed": "80",
|
|
"support_base_pattern": "rectilinear",
|
|
"support_base_pattern_spacing": "2",
|
|
"support_speed": "40",
|
|
"support_threshold_angle": "30",
|
|
"support_object_xy_distance": "0.5",
|
|
"detect_thin_wall": "0",
|
|
"top_surface_line_width": "0.4",
|
|
"top_surface_speed": "35",
|
|
"travel_speed": "150",
|
|
"enable_prime_tower": "1",
|
|
"prime_tower_width": "60",
|
|
"xy_hole_compensation": "0",
|
|
"xy_contour_compensation": "0"
|
|
}
|