OrcaSlicer-KX

Files

Bernhard Koppensteiner 09ea50c8e2 Prusa MINIIS custom g-code changes (#6067 )

* added Prusa Mini with Input Shaper to profiles

* Merge branch 'SoftFever:main' into main

* refactoring to more reusable settings

* Merge branch 'SoftFever:main' into main

* added more processes, changed settings

* Merge branch 'main' of https://github.com/koppensb/OrcaSlicer

* Update 0.15mm Speed @MINIIS.json

* Update 0.10mm Speed @MINIIS.json

* changed to cubic because of speed

* Merge branch 'main' of https://github.com/koppensb/OrcaSlicer

* further changes after reviewing prusa slicer settings

* simplified machine settings

* retraction speeds according to prusa slicer

* Merge branch 'SoftFever:main' into main

* changed max flow according to prusa slicer

* Merge branch 'main' of https://github.com/koppensb/OrcaSlicer

* after clearification at the prusaslicer repository M900 got removed

* Merge branch 'SoftFever:main' into main

* precise wall per default

* Merge branch 'main' of https://github.com/koppensb/OrcaSlicer

* enable reverse overhang on odd by default

* added settings from prusa slicer

* changed cooling setings

* Merge branch 'SoftFever:main' into main

* changed default to inner-outer-inner wall

inner-outer-inner gives pretty good overhangs with better surface

* new profiles for bigger nozzles, changed some cooling settings according to prusaslicer

* profiles for different nozzles sizes, better speed settings

* initial layer height was wrong

* wrong initial layer height

* set the correct accelerations

* Merge branch 'main' of https://github.com/koppensb/OrcaSlicer

* changed firmware version number

* using pressure advance UI setting instead of custom filament g-code

* Merge branch 'SoftFever:main' into main

* Update Prusa Generic PC.json

* Update Prusa Generic PC.json

* changed max flow for PC

* added PVA filament profiles

* bug fix in filament loading

* Merge branch 'SoftFever:main' into main

* Merge branch 'SoftFever:main' into main

* changed line width according to prusa slicer

* Merge branch 'main' of https://github.com/koppensb/OrcaSlicer

* Merge branch 'main' into main

* changed heatbed temperature for Minis capabilities

* Merge branch 'main' of https://github.com/koppensb/OrcaSlicer

* Merge branch 'main' into main

* Merge branch 'SoftFever:main' into main

* set default support to snug

* changed default filament setting to the correct value

2024-07-11 23:50:18 +08:00