OrcaSlicer-KX/resources/profiles/Prusa/filament/Prusament PVB @CORE One.json

{
    "chamber_temperature": [
        "20"
    ],
    "close_fan_the_first_x_layers": [
        "1"
    ],
    "compatible_printers": [
        "Prusa CORE One 0.25 nozzle",
        "Prusa CORE One 0.3 nozzle",
        "Prusa CORE One 0.4 nozzle",
        "Prusa CORE One 0.5 nozzle",
        "Prusa CORE One HF 0.4 nozzle",
        "Prusa CORE One HF 0.5 nozzle"
    ],
    "fan_cooling_layer_time": [
        "40"
    ],
    "fan_max_speed": [
        "100"
    ],
    "fan_min_speed": [
        "85"
    ],
    "filament_cost": [
        "49.98"
    ],
    "filament_density": [
        "1.09"
    ],
    "filament_diameter": [
        "1.75"
    ],
    "filament_end_gcode": [
        "; Filament-specific end gcode"
    ],
    "filament_flow_ratio": [
        "1"
    ],
    "filament_id": "Prusament PVB @CORE One",
    "filament_max_volumetric_speed": [
        "8"
    ],
    "filament_minimal_purge_on_wipe_tower": [
        "35"
    ],
    "filament_notes": [
        ""
    ],
    "filament_soluble": [
        "1"
    ],
    "filament_start_gcode": [
        "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
    ],
    "filament_type": [
        "PVB"
    ],
    "filament_vendor": [
        "Prusa Polymers"
    ],
    "filament_z_hop": [
        "0.6"
    ],
    "filament_z_hop_types": [
        "Slope Lift"
    ],
    "from": "system",
    "full_fan_speed_layer": [
        "3"
    ],
    "hot_plate_temp": [
        "75"
    ],
    "hot_plate_temp_initial_layer": [
        "75"
    ],
    "idle_temperature": [
        "150"
    ],
    "inherits": "fdm_filament_pvb",
    "instantiation": "true",
    "name": "Prusament PVB @CORE One",
    "nozzle_temperature": [
        "215"
    ],
    "nozzle_temperature_initial_layer": [
        "215"
    ],
    "overhang_fan_speed": [
        "100"
    ],
    "reduce_fan_stop_start_freq": [
        "1"
    ],
    "setting_id": "GFSA04",
    "slow_down_layer_time": [
        "8"
    ],
    "slow_down_min_speed": [
        "20"
    ],
    "type": "filament"
}