727864b41e
* bugfix for TPU filament overrides * higher voluemetric flow * bugfix for to high speed at internal solid infill * Update Prusa.json * updated firmware check and nozzle settings * bugfix speed and standard for 0,15mm profiles of the 0.4mm nozzle * variables not defined in orcaslicer * bug fix volumetric speed, wrong value * added high flow base process * added highflow base process * added first full draft of high flow profiles, further tests are necessary * changed 0.35mm to 0.32mm for 0.6mm nozzle * minor changes to initial layer speeds * changed 0.35mm to 0.32mm for 0.6mm nozzle * furcer changes on accelartion and speed * added 0.35mm Standard @MK3.5 again for not breaking anythin for current users * Update 0.35mm Standard @MK3.5.json forgot to set the layer_height after creation of the 0.35mm profile * minor fixes in filament overrides * added profiles for high flow nozzles on the Prusa MINIIS * added fan_speedup_time for MINIIS and MK3.5 * changes to support interface, pattern and distance --------- Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
28 lines
776 B
JSON
28 lines
776 B
JSON
{
|
|
"type": "process",
|
|
"setting_id": "GP004",
|
|
"name": "0.30mm Detail @MINIIS",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "process_detail_miniis",
|
|
"line_width": "0.9",
|
|
"inner_wall_line_width": "0.9",
|
|
"outer_wall_line_width": "0.9",
|
|
"top_surface_line_width": "0.7",
|
|
"sparse_infill_line_width": "0.9",
|
|
"initial_layer_line_width": "1",
|
|
"internal_solid_infill_line_width": "0.9",
|
|
"support_line_width": "0.65",
|
|
"layer_height": "0.3",
|
|
"initial_layer_print_height": "0.4",
|
|
"top_shell_thickness": "0.7",
|
|
"top_shell_layers": "3",
|
|
"wall_loops": "2",
|
|
"bottom_shell_thickness": "0.5",
|
|
"bottom_shell_layers": "2",
|
|
"travel_speed": "300",
|
|
"support_top_z_distance": "0.25",
|
|
"compatible_printers": [
|
|
"Prusa MINIIS 0.8 nozzle"
|
|
]
|
|
} |