11029eb0fe
* bugfix for TPU filament overrides * higher voluemetric flow * bugfix for to high speed at internal solid infill * Update Prusa.json * updated firmware check and nozzle settings * bugfix speed and standard for 0,15mm profiles of the 0.4mm nozzle * variables not defined in orcaslicer * bug fix volumetric speed, wrong value * added high flow base process * added highflow base process * added first full draft of high flow profiles, further tests are necessary * changed 0.35mm to 0.32mm for 0.6mm nozzle * minor changes to initial layer speeds * changed 0.35mm to 0.32mm for 0.6mm nozzle * furcer changes on accelartion and speed * added 0.35mm Standard @MK3.5 again for not breaking anythin for current users * Update 0.35mm Standard @MK3.5.json forgot to set the layer_height after creation of the 0.35mm profile
28 lines
842 B
JSON
28 lines
842 B
JSON
{
|
|
"type": "process",
|
|
"name": "process_detail_MK3.5",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"inherits": "process_common_MK3.5",
|
|
"travel_speed": "300",
|
|
"initial_layer_speed": "20",
|
|
"initial_layer_infill_speed": "35",
|
|
"outer_wall_speed": "40",
|
|
"inner_wall_speed": "60",
|
|
"bridge_speed": "30",
|
|
"support_speed": "60",
|
|
"small_perimeter_speed": "40",
|
|
"sparse_infill_speed": "100",
|
|
"internal_solid_infill_speed": "120",
|
|
"top_surface_speed": "60",
|
|
"gap_infill_speed": "40",
|
|
"default_acceleration": "1500",
|
|
"initial_layer_acceleration": "500",
|
|
"top_surface_acceleration": "1000",
|
|
"inner_wall_acceleration": "1200",
|
|
"outer_wall_acceleration": "800",
|
|
"bridge_acceleration": "1000",
|
|
"internal_solid_infill_acceleration": "2000",
|
|
"sparse_infill_acceleration": "2500",
|
|
"travel_acceleration": "3000"
|
|
} |