f0e9ad46ec
Renamed the gcfMarlin enum value to gcfMarlinLegacy so we never mistake it for the new one
...
There should be no functional change.
2021-04-06 15:45:49 +02:00
151a76ee92
Duplicated Marlin firmware flavor to 'Marlin (legacy)' and 'Marlin Firmware'
...
The two flavors should be identical after this commit, except that GCodeProcessor.cpp was not updated. This shall be done in a later step.
2021-04-06 15:45:49 +02:00
58a811a638
Wipe tower: correctly detect first layer even with 'No sparse layers' option enabled
2021-04-06 15:37:39 +02:00
5d636ab853
Wipe tower: respect first_layer_speed
2021-04-06 15:37:39 +02:00
3459231111
Wipe tower: set travel feedrate for a move from custom toolchange position to the wipe tower ( #5483 )
2021-04-05 23:39:27 +02:00
67bc2e472f
Wipe tower: fix wipe moves after recent changes
2021-04-05 23:39:27 +02:00
a6ddab856b
Wipe tower: refactoring of brim and solid infill on first layer
2021-04-05 23:39:27 +02:00
f6de946dd7
Wipe tower: don't use soluble filament for perimeters, sparse infill or first layer
2021-04-05 23:39:27 +02:00
3ed68ac28a
Wipe tower: slightly changed finish_layer logic so it can be called after any toolchange
2021-04-05 23:39:27 +02:00
cc7ef40e20
Wipe tower: remove unfinished square wipe tower option
2021-04-05 23:39:27 +02:00
97c4c02001
Wipe tower: don't do sparse infill when there is a soluble filament above it
2021-04-05 23:39:27 +02:00
1efa9a06f6
Adjustable wipe tower brim
2021-03-05 16:41:02 +01:00
86d7e1fb90
#5538 - Validation of custom g-code against gcode processor reserved keywords
2021-02-18 14:34:40 +01:00
50c6fc1719
Tech ENABLE_TOOLPATHS_WIDTH_HEIGHT_FROM_GCODE set as default
2021-02-17 11:23:17 +01:00
0ff0444dcc
Fixing Clang warnings 1
2021-02-08 17:52:29 +01:00
5bd443cd1f
#4936 - Take toolpaths width and height from gcode decorations, if available
2020-12-08 15:55:53 +01:00
f1d10f3c90
ENABLE_GCODE_VIEWER set as default in libslic3r
2020-11-12 14:03:58 +01:00
4f85a42830
Follow-up of bb74d2da5b and 7b2aca0159 -> Removed inclusions of GCode/Analyzer.hpp and GCodeTimeEstimator.hpp
2020-11-11 15:41:48 +01:00
18f72d82b9
Merge branch 'pa_reprap_g10_temperature_support' of https://github.com/ardenpm/PrusaSlicer into lm_g10
2020-10-23 11:42:35 +02:00
48b0a14c4c
Fixup of previous commit
2020-09-25 13:00:43 +02:00
b178d0af38
Wipe tower - small refactoring and fix
...
Collection of data from internal wipe tower gcode generator now uses move semantics.
Part of gcode at the end of priming was erroneously not exported (extruder current reset etc.)
2020-09-25 12:35:20 +02:00
a13fc805d7
Removed obsolete wipe tower related code
...
Most of the code is already commented out for a long time, it should be safe to remove now.
2020-09-22 15:20:24 +02:00
e7ae26fb8a
Fix of #2834 (unretracted wipes on wipe tower)
...
Wiping moves performed before moving away from the wipe tower were replaced by
scheduling a regular wipe that is performed after normal gcode generator regains
control. This makes it consistent with wipes on the model and gets rid of the
unretracted wipes.
2020-09-22 15:20:19 +02:00
541c31afb0
Merge branch 'master' into pa_reprap_g10_temperature_support
2020-09-15 11:40:38 +10:00
f6d25d0634
Rework G10 temperature support to be enabled only for a new Firmware type RepRapFirmware leaving the RepRap/Sprinter behaviour alone. Rename the enum for gcfRepRap to gcfRepRapSprinter and add new gcfRepRapFirmware enum value. Also adds code to only use the G10 searching in custom G-code if the flavour is RepRapFirmware.
2020-08-21 14:08:32 +10:00
ca27d7296f
Fixed build when ENABLE_GCODE_VIEWER is disabled
2020-08-18 08:27:07 +02:00
c81d87b470
Code cleanup
2020-08-17 15:59:36 +02:00
73603e4937
GCodeProcessor -> Do not export width tags to gcode
2020-08-17 14:37:26 +02:00
f2d02faef4
GCodeProcessor -> Added debug code to check toolpaths data extracted from gcode, as mm3 per mm, height and width
2020-08-17 10:06:41 +02:00
11cf9a87f1
GCodeProcessor -> Calculate mm3 per mm on the fly
2020-07-29 10:04:10 +02:00
d9228ee82c
GCodeProcessor -> Human readable extrusion roles in gcode
2020-07-28 09:48:55 +02:00
dd424b6bcf
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-05-21 11:38:22 +02:00
35c8c84631
Fix of #3965 (properly disable linear advance with RepRap firmware)
2020-05-21 10:47:50 +02:00
5c6a56ca29
GCodeAnalyzer and GCodePreviewData removed from tech ENABLE_GCODE_VIEWER
2020-05-07 10:49:12 +02:00
dce1f24ad8
GCodeProcessor additions:
...
process G10 lines
process G11 lines
process G22 lines
process G23 lines
process M106 lines
process M107 lines
process mm3_per_mm comment tag
2020-04-03 10:15:46 +02:00
956f7a4593
GCodeProcessor additions:
...
process G90 lines
process G91 lines
process G92 lines
process M82 lines
process M83 lines
process T lines
process extrusion role/width/height comment tags
debug output
2020-04-02 12:03:18 +02:00
a6a77361ba
Multimaterial purging lines fixed on rectangular beds with non-standard origin ( #3805 )
2020-03-11 16:10:51 +01:00
4ba7cb7ede
Fix of the wipe tower starting point
...
see issues #2968 , #3234 and #3248
2019-12-04 13:47:02 +01:00
88514eeb0e
Merge branch 'lm_low_wipe_tower'
2019-11-14 10:37:04 +01:00
d632d91e79
WipeTower.cpp: The M220 B/R gcode is only emitted for Marlin firmware flavor
...
The extended gcode is now only supported by Prusa (https://github.com/prusa3d/PrusaSlicer/issues/3114 )
A pull request https://github.com/MarlinFirmware/Marlin/pull/15739 aims to extend the gcode in upstream Marlin as well
2019-10-31 15:08:20 +01:00
fdf9272fbe
Wipe tower brim width is now part of WipeTowerData class, so it can be used wherever needed
2019-10-08 13:50:51 +02:00
61cee54dd3
Merge branch 'master' into lm_low_wipe_tower
2019-10-01 13:24:25 +02:00
b5e3899267
Wipe tower: Sparse layers are not included in filament consumption in case that the 'no sparse layers' option is set
2019-10-01 11:41:37 +02:00
7861fa5086
Whitespace changes to supress misleading indentation warnings
...
These appear in newer gcc when spaces and tabs are mixed
2019-09-24 16:01:01 +02:00
ae3a3029c0
Merge remote-tracking branch 'remotes/origin/master' into dev
2019-09-13 18:58:39 +02:00
d86cf1e116
Fix of a regression in wipe tower generator:
...
Return to the known position after custom tool change G-code.
2019-09-13 18:56:37 +02:00
c5f78dd6e2
Some more warnings fixed (WipeTower.cpp/.hpp)
2019-09-10 12:08:43 +02:00
805a5d22a1
Fixed couple of warnings in WipeTower.cpp, ToolOrdering.cpp and GCode.cpp
2019-09-04 14:56:35 +02:00
942f959e87
Fixed couple of warnings
...
Turned several includes into forward declarations
Removed several sprintf calls in favor of std::to_string
2019-09-02 16:27:48 +02:00
af2a3d2c08
Fixes of the wipe tower
...
- added an extra travel move after a toolchange
- wipe tower only sets temperatures with single extruder MM printers
- ooze prevention does not work with the wipe tower - added a check into Print::validate()
2019-08-28 16:28:22 +02:00
