25dd2452fa
Duplicated Marlin firmware flavor to 'Marlin (legacy)' and 'Marlin Firmware'
...
The two flavors should be identical after this commit, except that GCodeProcessor.cpp was not updated. This shall be done in a later step.
2021-04-06 15:45:49 +02:00
a5657dc8d8
Use correct M204 command for acceleration
...
M204 S is not supported for RepRapFrimware (https://duet3d.dozuki.com/Wiki/Gcode#Section_M204_Set_printing_and_travel_accelerations ).
2021-01-11 10:50:18 +01:00
b18d01f6ff
Limiting the resolution of G-code export for retract/deretract feedrate
...
to three digits.
Fixes excessive precision in gcode? #5362
2020-12-04 13:37:36 +01:00
e13d414d3c
Merge branch 'pa_reprap_g10_temperature_support' of https://github.com/ardenpm/PrusaSlicer into lm_g10
2020-10-23 11:42:35 +02:00
32ce49ff37
Fixup of 8df0181 (turning off the export of machine limits)
...
This should solve #1212 for good
2020-10-06 13:31:42 +02:00
abb5d17dfb
Fixed limitation of acceleration values written into G-code
...
in case the machine limits are disabled.
2020-10-06 10:24:06 +02:00
bf09c55832
Rework G10 temperature support to be enabled only for a new Firmware type RepRapFirmware leaving the RepRap/Sprinter behaviour alone. Rename the enum for gcfRepRap to gcfRepRapSprinter and add new gcfRepRapFirmware enum value. Also adds code to only use the G10 searching in custom G-code if the flavour is RepRapFirmware.
2020-08-21 14:08:32 +10:00
8cdd76aa3a
Add G10 temperature G-code support for the RepRapFirmware flavour.
2020-07-20 20:57:37 +10:00
46739c0c47
Implemented editing for extruder of existing ToolChangeCode tick
...
+ Code refactoring: DoubleSlider is extracted from wxExtensions
2020-01-23 16:11:21 +01:00
836cd78885
Another bugfixes of GCode export after refactoring.
2020-01-14 15:12:45 +01:00
7c0cdc3134
Refactoring of GCode::process_layer().
...
Refactoring of GCode export of color changes, extruder switches etc,
so that the "color change" like extruder switches are applied first
at the Wipe Tower / G-code export, so that adding / removing
an extruder switch at the G-code preview slider does not invalidate
slicing.
2020-01-14 10:31:18 +01:00
b9d171f2c7
Ported test_gcodewriter from upstream Slic3r, thanks @lordofhyphens.
...
The format for G1 Fxxx was changed to fixed three decimal digits.
2019-10-15 17:35:19 +02:00
06bff5a046
GCodeWriter.cpp: Fixed skipped z-lifts when its height was equal to layer height ( https://github.com/prusa3d/PrusaSlicer/issues/2154 )
2019-08-27 12:41:00 +02:00
1260b8deb3
WIP: Moved sources int src/, separated most of the source code from Perl.
...
The XS was left only for the unit / integration tests, and it links
libslic3r only. No wxWidgets are allowed to be used from Perl starting
from now.
2018-09-19 11:02:24 +02:00
