f0e1464ca3
WIP: Fix of arrangement after reducing ClipperLib::cInt
...
from int64_t to int32_t
2021-04-13 16:35:46 +02:00
a1a50fe096
Marked the unsafe ClipperUtils offset functions with CLIPPERUTILS_UNSAFE_OFFSET
...
Replaced some of the unsafe offset functions with safe variants.
Please test the
1) print bed from STL function
2) concentric infill
2021-04-13 13:28:37 +02:00
1b6534d5ac
Clipper / ClipperUtils:
...
1) Let Clipper use int32_t for representing its coordinates. This
reduces memory and allows to skip conversion between Slic3r Polygon
and Clipper polygon.
2) Disable additional offset before executing the Clipper Offset algorithm.
We don't see any reason for that and it required 64bit Clipper coordinates,
which were disabled with 1).
2021-04-13 11:31:54 +02:00
05386e9b20
FDM snug supports: New parameter "closing radius", inspired by Cura's
...
support_join_distance
2021-04-12 14:56:36 +02:00
aad9aa112d
Fixed a typo in an error message (--sw_renderer -> --sw-renderer)
2021-04-12 09:15:28 +02:00
f8d7c7684a
Configs should point to PrusaSlicer-alpha, not beta in alpha stage.
2021-04-09 08:11:40 +02:00
2e70270d64
Fix of brim under supports
2021-04-08 16:36:52 +02:00
c0434121f5
New FDM support sparse infill zig-zag algorithm.
...
Fixed some old support and infill issues.
Fixes support problem #4295
Fixes Parts of interface layer extends beyond supports and cannot be printed
Fixes support missing under horizontal overhang #6058
Fixes Slicer double-traces small sections of Rectilinear Supports, causes
Fixes plastic buildup and nozzle crashes #4951
Fixes Add "Angle Interface layers" #2969
2021-04-08 15:29:40 +02:00
9e770e052c
Fix slow cancellation of rasterization step
...
fixes #6253
2021-04-08 14:36:37 +02:00
2bea4ccf9d
Merge remote-tracking branch 'origin/tm_sl1_import_fix'
2021-04-07 13:56:14 +02:00
bb9d1b3679
Remove right click menu item for "optimize orientation"
2021-04-07 12:51:02 +02:00
27229c0b5f
Small improvement to "least supports" method
2021-04-07 12:51:02 +02:00
389a3d0a6a
Better naming of gui controls
2021-04-07 12:51:02 +02:00
a2be47a6e6
Allow rotation of multiple selected items. Disable auto positioning
2021-04-07 12:51:02 +02:00
d74c616905
Remove accuracy slicer
...
No practical use
2021-04-07 12:51:02 +02:00
6f04f1b1d9
Allow auto-rotation of objects not completely inside bed.
...
Don't use SLAPrintObject as the input for optimization. Use ModelObject and pass the print config to the optimization in RotoptimizeJob::prepare()
2021-04-07 12:51:02 +02:00
b0d2df95e4
Increase performance of "best misalignment" method
2021-04-07 12:51:02 +02:00
785c7e97ec
Change configuration bank name for SLA auto rotation
2021-04-07 12:51:02 +02:00
c8c9a4cf8b
Tolerate corrupted appconfig settings for auto rotation
2021-04-07 12:51:02 +02:00
cb3be22de1
Remove leftover debug message
2021-04-07 12:51:02 +02:00
f21e0ae0ff
Least supports optimization revived.
...
Fix missing include on Win32
Cleanup benchmarking code
2021-04-07 12:51:02 +02:00
97e7350911
Method selection implemented
2021-04-07 12:51:02 +02:00
a7851618c8
Extend execution framework with convenience functions
2021-04-07 12:51:02 +02:00
c9b787af67
Unite cancel callback and status function
2021-04-07 12:51:02 +02:00
a8420ca83c
Speed up rotation optimizer
...
- No float to double conversion
- Solving issue of random (very similar) results due to the parallel summation of floats
2021-04-07 12:51:02 +02:00
192269b2c7
Add new execution framework
...
Inspired by std::execution
2021-04-07 12:51:02 +02:00
44076d12db
Reverting to old rotation optimizer object-function.
...
Keep the performance optimizations though
2021-04-07 12:51:02 +02:00
f5ba2a1441
Fix duplicated error message dialog from GUI jobs.
2021-04-07 12:41:52 +02:00
27c779cc16
Fix issue with importing sl1 files with non-ascii filenames.
2021-04-07 12:41:38 +02:00
424e1233fa
MSW specific: Fixed update of the UI after system color change.
...
Note: the wxEVT_SYS_COLOUR_CHANGED event works only for high contrast settings under MSW.
+ ConfigSnapshotDialog: Fixed UI colors for dark mode on all platforms
2021-04-06 22:25:35 +02:00
ecf048ad84
An attempt to fix time estimates for 'Marlin (legacy)' flavor
...
Old M204 S sets both printing and travel accelerations, which must be
accounted for now when the latter was separated.
2021-04-06 15:45:49 +02:00
6deb8338f3
GCodeProcessor added travel acceleration
2021-04-06 15:45:49 +02:00
311a5a3e01
GCodeProcessor use new flavor gcfMarlinFirmware
2021-04-06 15:45:49 +02:00
0e8f871361
Implemented new acceleration control behaviour for the new Marlin firmware flavor:
...
- show extra travel acceleration settings in 'Machine limits' page in Printer Settings
when the new firmware flavor is selected
- updated tooltips on the config values (they were basically wrong even in the current version)
- 'Marlin (legacy)' firmware flavor behaviour should not change: it exports M204 Pa Rb Ta
(where a, b are the values from machine limits) at the beginning of gcode and it uses
M204 S... for feature type dependent acceleration settings (legacy variant of M204 P.. T..)
- new Marlin Firmware exports M204 Pa Rb Tc (where a,b,c are the values from machine limits).
Feature type dependent acceleration is set using M204 P..., not overriding the travel acceleration.
2021-04-06 15:45:49 +02:00
76de47ffca
Renamed the gcfMarlin enum value to gcfMarlinLegacy so we never mistake it for the new one
...
There should be no functional change.
2021-04-06 15:45:49 +02:00
25dd2452fa
Duplicated Marlin firmware flavor to 'Marlin (legacy)' and 'Marlin Firmware'
...
The two flavors should be identical after this commit, except that GCodeProcessor.cpp was not updated. This shall be done in a later step.
2021-04-06 15:45:49 +02:00
f0cd00bef7
Wipe tower: correctly detect first layer even with 'No sparse layers' option enabled
2021-04-06 15:37:39 +02:00
0d34e74a52
Wipe tower: reorder extruders so first layer starts with soluble if possible
...
That way it will not be wiped on first layer
2021-04-06 15:37:39 +02:00
dce95fdeae
Wipe tower: respect first_layer_speed
2021-04-06 15:37:39 +02:00
5717ba2e6c
Wipe tower: set travel feedrate for a move from custom toolchange position to the wipe tower ( #5483 )
2021-04-05 23:39:27 +02:00
641040d3f7
Wipe tower: fix wipe moves after recent changes
2021-04-05 23:39:27 +02:00
5beca060ed
Wipe tower: refactoring of brim and solid infill on first layer
2021-04-05 23:39:27 +02:00
6719d91430
Wipe tower: don't use soluble filament for perimeters, sparse infill or first layer
2021-04-05 23:39:27 +02:00
cda523f8d9
Wipe tower: slightly changed finish_layer logic so it can be called after any toolchange
2021-04-05 23:39:27 +02:00
607c3efae8
Wipe tower: remove unfinished square wipe tower option
2021-04-05 23:39:27 +02:00
99d8db0255
Wipe tower: don't do sparse infill when there is a soluble filament above it
2021-04-05 23:39:27 +02:00
75347a63f6
Merge branch 'tm_libnest2d_backport'
2021-04-01 09:50:12 +02:00
c9912adeb3
Refactoring in GCodeViewer
2021-04-01 08:24:19 +02:00
ec498fd270
Auto color change: next improvements
2021-03-31 15:10:48 +02:00
08fbd4272c
Back-porting improvements for libnest2d
2021-03-31 09:36:54 +02:00
