ad0f9b5e5a
FIX: pa default item add filament_id
...
jira: none
Change-Id: Icfc24390e62cc1eca7e670311dc88502cea16fd7
(cherry picked from commit fb72d19a44d3b916920373acb7dd359282c1b750)
2025-09-17 15:09:51 +08:00
18ffc5497b
NEW:added inspection of pla-glow material
...
jira:[none]
Change-Id: I1a62992e24665b83f54981e59edc1ba1fcda9a8a
(cherry picked from commit fa2fc22f3e648c0f0f485d1a7e701658693da457)
2025-09-17 11:16:10 +08:00
1364a38504
FIX: fix some size error on dpi changed
...
jira: TUDIO-10053
Change-Id: Icd93aa0dd9a2c693d7b957f9ede5c6dafc415352
(cherry picked from commit ce65273dc0fc9bc3f23dc54b01e4dcc92d92483c)
2025-09-16 21:21:40 +08:00
8c06b19a7b
ENH:translate text
...
jira:none
Change-Id: I2d37d7ba4867b1507d2a8073dfdfc836b7c8e112
(cherry picked from commit 5427e9e0522b370e85ef0b2eab8394ae5f41ed40)
2025-09-10 16:31:39 +08:00
b5dc52b00e
FIX: sort the filament names
...
jira: [STUDIO-9825]
Change-Id: I29a313db9a012124888357008afea1ddba39a3e5
(cherry picked from commit 1a676645eb522821428cc3167bfb8ac43277e330)
2025-09-10 10:07:22 +08:00
09a8ccaa18
FIX: always show select nozzle type notice
...
jira: [STUDIO-9151]
Change-Id: I432beaa11c0a776ca214cbfc675227f95837b426
(cherry picked from commit 6587ac01b83268982a049b5ac0c45f8aac2b3f5d)
2025-09-06 21:36:28 +08:00
8fb9cc2ee8
FIX:revise the size and alignment of GUI label
...
jira: [STUDIO-9215]
Change-Id: I0e3989644a6edb8d33bcc248fcf2a8d4d98efbe6
(cherry picked from commit 5b13591c9d47a530c76af884975d3b91bf595260)
2025-09-05 17:59:04 +08:00
37ff918ea9
FIX: modify the name of high flow
...
jira: none
Change-Id: Icd1a0ac91e957fc38a6f072b1bb3af0c97be398e
(cherry picked from commit ea0691f092755d7e68db3ecf8b46b0e86a8fadb2)
2025-08-24 23:18:28 +08:00
1e6a186e2b
ENH: support auto pa cali for multi_extruder printer
...
jira: none
Change-Id: I835a0e20de81f9af7c40983e00bdb37ea6c95a68
(cherry picked from commit 4e387d4ace4332a7c2b6c0ab695b80a51597d0c7)
2025-08-24 23:18:27 +08:00
e8d77ddb58
FIX: show k value when select default pa profile
...
jira: STUDIO-8540
Change-Id: I1c92628fa888f935762d31968237e28d65594e51
(cherry picked from commit 3f791574cd5ae384ee295e595f35d45c78ac719f)
2025-08-24 23:18:25 +08:00
1b55440b15
Fix compile
2025-08-24 23:18:23 +08:00
64a2199733
FIX: Add a matching rule with the same name for PA value
...
jira: 8339
Change-Id: I134139fd8cff9cb47b29523e90d5dd4f2667c387
(cherry picked from commit 489285c9b89bdd21812c5e7429263fb28fd30f20)
2025-08-24 23:18:23 +08:00
d841b2d178
FIX: Add a matching rule with the same name for PA value
...
jira: 8339
Change-Id: Ib11be988a8e3cdbcaa853627cb946446730062c4
(cherry picked from commit f4379b3e193ac6d30b8ee91b5c3ff5518aec1f31)
2025-08-24 23:18:23 +08:00
22d00f89b0
ENH: add tpu check for send print and cali
...
jira: 8234
Change-Id: I5706071d900079477abc9558461811a8d85fb0ab
(cherry picked from commit f0d2ad3dbe2e29548a8b3621a863cd38b543b6b4)
2025-08-24 23:18:17 +08:00
b46b69ebad
NEW:support new ext slot mapping
...
jira:[support new mapping]
Change-Id: Iaf88f7bd57177df772a926ad162bd3b5a141327a
(cherry picked from commit 3b93bd2dd305026457e9f63ca3faeb153b59c9a5)
2025-08-24 23:18:00 +08:00
65936b34c1
Fix crash when using old firmware
2025-05-24 18:37:35 +08:00
fe0f6497ad
Fix external filament calib
2025-05-07 21:31:42 +08:00
406ccadd06
ENH:use the correct trayID
...
jira[STUDIO-11274]
Change-Id: I0025bb74002b00c448fd4a499e547a5fbd35537f
(cherry picked from commit 937f687169091982bc6f11c5e76fb823b0456590)
2025-05-07 18:45:18 +08:00
48ec9edc51
ENH:command ams filament settings is compatible with all AMS
...
jira:[none]
Change-Id: I622300794d1fa14826847229737b1f6f2ae490db
(cherry picked from commit c2adbe140b134b958f589ba178286e245a09adbf)
2025-05-07 18:13:03 +08:00
92972879f5
FIX: modify for get pa cali result
...
jira: none
Change-Id: I3c57ccaac3b7e73e0b2eb0e26678635478480298
(cherry picked from commit 6bf39690517f9e25de895bf52673d3a4a7b77255)
2025-05-07 16:38:26 +08:00
b4f1ef06a2
Fix compile error
2025-05-07 16:36:00 +08:00
108a5b8344
Update naming
2025-05-07 16:35:57 +08:00
f6bfad9de1
Fix wrong slot id
2025-05-07 16:35:34 +08:00
7c5dee1eda
ENH: support auto pa cali for multi_extruder printer
...
jira: none
Change-Id: I835a0e20de81f9af7c40983e00bdb37ea6c95a68
(cherry picked from commit 4e387d4ace4332a7c2b6c0ab695b80a51597d0c7)
2025-05-07 15:46:24 +08:00
72fa3fbb26
FIX: modify color to empty string when reset filament
...
jira: none
Change-Id: I3a32dc8307ec5d65c8c5b7b05a5bc1e2d7d2b5b7
(cherry picked from commit a0b563dc8fbddd201198dd073471887d104a58cb)
2025-05-07 15:36:05 +08:00
df3fe1491a
FIX: crash when select filament in device
...
jira: STUDIO-7972
Change-Id: Ice9e7360fbfe0c07bd49bbd696bb3cfb662e94e4
(cherry picked from commit 4c644d47157dd5cc403d6a1640c5874b99b10c4a)
2025-05-07 15:33:36 +08:00
e9e661a9db
FIX:when ams cali_idx is unknown, use default item
...
2. use transparent color when reset filament
jira: 7946
Change-Id: I129dc0e6b7244cad3b5e61e1bc423938f4b92d7e
(cherry picked from commit 7f473c2027e31458664e184645cf46f8e9b5d307)
2025-05-07 15:32:23 +08:00
8a89c159db
FIX: modify for virtual slot when multi_extruder
...
jira: none
Change-Id: Ic7284018ecb44e24536788b05dba572b96460e66
(cherry picked from commit 52e890fba1584bf9687a24ee46890c00f531e383)
2025-05-07 15:30:04 +08:00
11cc964352
FIX: pa default item add filament_id
...
jira: none
Change-Id: Icfc24390e62cc1eca7e670311dc88502cea16fd7
(cherry picked from commit fb72d19a44d3b916920373acb7dd359282c1b750)
2025-05-07 15:21:07 +08:00
500d1835a8
FIX: add filament_id when reset ams setting
...
jira: none
Change-Id: Iedd2eec94bd1e41a51cededc06b304a2e29ef808
(cherry picked from commit 4c6316b98137dc230c6a0c2093ffb290c09ccef7)
2025-05-07 15:20:49 +08:00
1f08ec6072
FIX:use old tray_id for set ams filament
...
jira:[ams setting]
Change-Id: I965f532fbd590b501b40c2cc812d6d02054b3628
(cherry picked from commit ee3cb45b4d49d05417a6a4735e2cdd5050bc35c5)
2025-05-07 15:20:36 +08:00
d71b1b57e2
FIX:fixed unable to reset ams filament setting
...
jira:[for reset ams]
Change-Id: I9f2f8be4a6e16b05191e4076db4e3f53d7601db4
(cherry picked from commit 3119a84eb2af58b89113f03c4393d1062423f930)
2025-05-07 15:18:02 +08:00
45dd04c899
ENH:support set ams filament
...
jira:[for 2nozzle setting]
Change-Id: Ib9e20bcdf6d8ea1bf5dd5e8624a68730e05e69ad
(cherry picked from commit 78c592819473b1291d1bec1126ccbf7d86bb17d5)
2025-05-07 15:13:39 +08:00
319827daec
ENH:support parse new print data
...
jira:[for new print data]
Change-Id: Iac6747e9ade690fcdf3b7b11239fe183bc7c3796
(cherry picked from commit 6c02c7bc8c77a481253e6c574f7bc13ff2cfcbdc)
2025-05-07 15:01:17 +08:00
89a225a0e1
ENH: add default item for pa
...
jira: none
Change-Id: I4ad3bd094325bdbd1e6b013a91766214951dc032
(cherry picked from commit 0c772105f946121c292f92ab3ca1d050b898311b)
2025-05-07 14:33:38 +08:00
693cf5f2f4
FIX: the default value is not correct
...
and the pa profile not display in AMS setting dialog after switch nozzle diameter
jira: 8620
Change-Id: If40bfe41ae13f5199f09baae3af09757498f1edf
(cherry picked from commit f3064e223df468eb9901e65c8f0abab2dae91f15)
2025-05-07 14:27:03 +08:00
afb1d3df6f
refactoring the modules of amscontrol
...
adapted from bambulab/BambuStudio@b78fa4c11c
Co-authored-by: tao wang <tao.wang@bambulab.com >
2025-05-07 11:30:29 +08:00
d37f1b6a81
Fix english strings consistency ( #8881 )
...
* "non zero" -> "non-zero"
* "Z hop" -> "Z-hop"
* "works" -> "is working"
* "version at least x" -> "version x or higher"
* "printing job" -> "print job"
"to print on" -> "printing on"
* "is not find" -> "was not found"
* "boundary of plate" -> "plate boundaries"
* "toolchange" -> "tool change"
* "colour" -> "color"
* "cancelled" -> "canceled"
* "can not" -> "cannot"
* "gcode" -> "G-code"
2025-04-26 19:59:49 +08:00
035b047fef
Fix AMS filament selection compatible check ( #9126 )
...
* Fix AMS filament selection compatible check (SoftFever/OrcaSlicer#9112 )
2025-04-14 23:31:20 +08:00
2e4a2a26e6
Update locale
2025-02-14 23:42:43 +08:00
22613f498a
FIX:display msg when cannot edit filament
...
jira:[edit filament]
Change-Id: I7e2b4fabeb3930f34fc252f1334e168e4f623b77
(cherry picked from commit 95655e067a7187afd29e53759aae8e3023a5a7f7)
2025-01-23 11:38:16 +08:00
bd754287ac
ENH:remove useless prompt information
...
jira:[STUDIO-7884]
Change-Id: Ia3fa5f8c99859d693544d3cb2be47975c3ed7493
(cherry picked from commit d9a8d68042c49258905071e902ac3963a6b3575e)
2025-01-23 11:38:15 +08:00
65d4d31bb3
FIX:fixed unable to pick color
...
jira:[for setting]
Change-Id: I877af3561fcbeb43b46202cb2b27b6522425a83f
(cherry picked from commit 5648ef61afdc1463e7dc80856a6e4a65e6a892c7)
2025-01-23 09:45:13 +08:00
8eece6a66f
NEW:Support setting filaments in printing
...
jira:[set filament]
Change-Id: Ib37896f9101d93ca63c7edb0b1e6328045a5ddb3
(cherry picked from commit fa2dbd7ada18bc806be845673cce9eb4559cda80)
2025-01-23 09:43:32 +08:00
82c90666da
Warnings: replace wxSOLID with wxPENSTYLE_SOLID ( #6579 )
...
* Replace wxSOLID with wxPENSTYLE_SOLID
2024-09-07 18:17:35 +08:00
7082e945b1
Revert "Fix Compile Warnings ( #5963 )"
...
This reverts commit b83e16dbdd
2024-08-12 00:00:20 +08:00
b83e16dbdd
Fix Compile Warnings ( #5963 )
...
* Fix calls to depreciated wxPen constructor
* Fix use of wxTimerEvent
* Fix unrecognized character escape sequence
* Fix signed/unsigned mismatch
At least as much as possible without significantly altering parts of the application
* Clean unreferenced variables
* fix mistyped namespace selector
* Update deprecated calls
* Fix preprocessor statement
* Remove empty switch statements
* Change int vector used as bool to bool vector
* Remove empty control statements and related unused code
* Change multi character constant to string constant
* Fix discarded return value
json::parse was being called on the object, rather than statically like it should be. Also, the value was not being captured.
* Rename ICON_SIZE def used by MultiMachine
By having the definition in the header, it causes issues when other files define ICON_SIZE. By renaming it to MM_ICON_SIZE, this lessens the issue. It would probably be ideal to have the definitions in the respective .cpp that use them, but it would make it less convenient to update the values if needed in the future.
* Remove unused includes
* Fix linux/macOS compilation
* Hide unused-function errors on non-Windows systems
* Disable signed/unsigned comparison mismatch error
* Remove/Disable more unused variables
Still TODO: check double for loop in Print.cpp
* Remove unused variable that was missed
* Remove unused variables in libraries in the src folder
* Apply temporary fix for subobject linkage error
* Remove/Disable last set of unused variables reported by GCC
* remove redundant for loop
* fix misspelled ifdef check
* Update message on dialog
* Fix hard-coded platform specific modifier keys
* Remove duplicate for loop
* Disable -Wmisleading-indentation warning
* disable -Wswitch warning
* Remove unused local typedefs
* Fix -Wunused-value
* Fix pragma error on Windows from subobject linkage fix
* Fix -Waddress
* Fix null conversions (-Wconversion-null)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
2024-07-29 21:00:26 +08:00
a4be61e391
FIX: modify the limit value of k to 1
...
jira: none
Change-Id: Ibb829c0d820ef63ec767e4591815d234d0c0ddc0
2024-06-16 01:44:29 +08:00
ad341ec9e6
Feature/merge bs1.91 ( #5394 )
...
* fixed logic error in PLA jamming gcode for P1S
* Fix use after free bug in LinesBucketQueue::emplace_back_bucket
I found a use after free bug in LinesBucketQueue::emplace_back_bucket. This was found by enabling address sanitizer.
The LinesBucketQueue class has two related members:
std::vector<LinesBucket> line_buckets;
std::priority_queue<LinesBucket *, std::vector<LinesBucket *>, LinesBucketPtrComp> line_bucket_ptr_queue;
line_bucket_ptr_queue holds pointers into line_buckets. However, since items are inserted into line_buckets one at a time, existing pointers that were stored inside line_bucket_ptr_queue become invalid. Specifically:
void LinesBucketQueue::emplace_back_bucket(ExtrusionLayers &&els, const void *objPtr, Point offset)
{
auto oldSize = line_buckets.capacity();
line_buckets.emplace_back(std::move(els), objPtr, offset); <--- Causes a reallocation, making previous pointers invalid
line_bucket_ptr_queue.push(&line_buckets.back()); <-- priority queue compares against old, now invalid pointers
...
The proposed fix is to calculate the required number of entries in ConflictChecker::find_inter_of_lines_in_diff_objs, and then calling line_buckets.reserve(count). This ensures that sufficient buffer is allocated up front and the pointers are stable as items are added.
* Updated to fix the handling of the capacity change, and removed the code I previously added to reserve upfront since it is not really needed
* Remove accidentally added whitespace
* Removed unused method
* ENH:add mz_zip_reader_extract_to_file_w api
to solove plugin install failed problem by special wide char
jira: none
Change-Id: Ic7d3efe3fdf852387650abf9df65803da9e46a60
(cherry picked from commit b68ad03717a63675fef2f3ef73d4058bf311adea)
* FIX: PrinterFileSystem report real connect error
Change-Id: I99d6ff7f6dcb1f53ccf59854f5f19d0bd39fa9fc
Jira: none
* rename preference name
* FIX:Relax restrictions on importing obj files
jira: none
Change-Id: I61a0156a8424a5f59922956918d37d38e2c3306a
* FIX: [6469] popup dialog too mach when reload object
Jira: 6469
Change-Id: I4097e3a3b018c7a676fea93bf63f8f778bb3148b
* FIX:fixed incorrect display of printer options page on Linux
jira:[STUDIO-6220]
Change-Id: Id1f084658b0b340b7f17ab97ba82c0fd3ae83fae
* FIX: handle exception of dividing by zero in arranging
jira: none
Change-Id: I0d20464dbe81a80293539100f06d72dee456a27b
(cherry picked from commit 94746ae9bf7f467243849570450567b4fdc78e3a)
* ENH:delete no use code
jira: none
Change-Id: I40e7ffa7ea47bb3cd4039eef9f6c28c604eb3abc
* FIX: PrinterFileSystem::FileRemoved
Change-Id: I891aaa8d58ff379dc1ebd8581064865a33388f74
* FIX: resend ttcode to printer on -90 error
Change-Id: I96dc45102a2759a9f1a0002f42c3a91b2c6b2d75
Jira: STUDIO-5947
(cherry picked from commit 97d687b7c88f8cd51b8eddd39120349d8eac42b1)
* FIX: fix some issue in multi machine
JIRA: STUDIO-6934 STUDIO-6888
1. Fix the issue of incomplete display caused by excessively long file names
2. Fix the issue of icon display being too large
3. Fix the issue of garbled Chinese characters in the task list
Change-Id: I36bc10bf2067f44aaa7e3651b58e526ea323c8ad
* FIX: Incorrect multiplier, when the multiplier is set to below 1
github: #3987 #3805
1. In some languages that use commas as decimal points, setting multiplier below 1 will resolve to 0
2. Unable to save multiplier correctly
Change-Id: I62bc55e270929ebb5e910eb79c6f97106e842b93
* Arrange
* FIX: wrong wipe tower when open 3mf file
1.wipe tower pos in 3mf was overwritten by default pos when opening 3mf
with a different printer profile.This patch fix it
jira: STUDIO-5890
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I12e5d4b80a0ad86194db0682c1763ba4a9492521
* ENH: update A1 machine gcode
1.Adjust the y position of the A1 extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Iea690a0184ae10a47f53e1532272c31fc0a04cfa
* FIX: minor spelling mistake in gcode
github:#3477
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Id3201bf8b8125ce060e2cac102ab2525877e27c1
* FIX: slice crash with height_range
github: 3917
Change-Id: Icdf83013213b47935b7a795ed75cc3d49057665d
* FIX: ERROR_RES_BUSY text
Change-Id: Ifde1a7b0c6ab915eb226c2072c46edd40f60cf9a
Jira: STUDIO-6436
* ENH:Unable to send printing without selecting a device
jira:[STUDIO-6850]
Change-Id: Ic537579727fd1618af364db93fce8fbbe4cd635a
* FIX:add exit_gizmo before slice model
jira: STUDIO-5531
Change-Id: Icddc9d73b3d91bb68e9768d13e48cbae0680e58e
* FIX: PrinterFileSystem report real connect error
Change-Id: Id6750cfa2a98fe8325ba677dabb606a0a701b495
* FIX: add can slice judgement in slice all plates processing
jira: STUDIO-6325
Change-Id: Ic7fb8cef000c03210bb77289a570ee6b60b6083e
* FIX:Fixed error in displaying the name of Bambu filaments
Change-Id: Ib42194c07b6eefe793eec81a588debc9d622d951
* FIX: text hidden in calibration tab
jira: STUDIO-6264
Change-Id: I24fbc590638a3213d948a973422e010486113923
* FIX: logic error in PLA fan control
github PR: #3948
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I28e4a673e590e83d151e92cc82caab45012aeabe
* FIX:upgrade cluster algorithm to remove duplicate labels
jira: none
Change-Id: I4d68d8cd8e080932c7c308bc8f69e27546ffe309
* FIX: can not parse json float in ES on macOS
jira: STUDIO-5889
Change-Id: I622f4b474c378d77b0e43d67a320f023be2d5811
* ENH:Clear the value of the previous nozzle type
jira:[for nozzle check]
Change-Id: I9a932b833fb07de6cb0a91abe6372b0e91f273f1
* ENH: update A1 gcode
1.Modify the width of extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I90543758c866d74f2154e3135d7569109def84b8
* FIX: the height range is not valid in assemble object
github: 3876
Change-Id: Id38672bbf0c01bc9b9f0a3e2bf1052d945b45131
* FIX: calibration page text hidden in linux
jira: STUDIO-6264
Change-Id: If210abf64057eb2e9c2c5b11d41fa33f18684c72
* ENH:clear nozzle information
jira:[STUDIO-7050]
Change-Id: I15ca4973d09132ddb5cb5a56bedd795ba6976b27
* update plugin version
---------
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Co-authored-by: afriede <me@afriede.dev >
Co-authored-by: Momin Al-Ghosien <momin@sanestudios.com >
Co-authored-by: zhou.xu <zhou.xu@bambulab.com >
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com >
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com >
Co-authored-by: tao wang <tao.wang@bambulab.com >
Co-authored-by: Arthur <arthur.tang@bambulab.com >
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com >
Co-authored-by: xun.zhang <xun.zhang@bambulab.com >
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com >
Co-authored-by: liz.li <liz.li@bambulab.com >
2024-05-19 21:22:14 +08:00
226450ea6a
Merge some features from BS1.9 beta4 ( #5181 )
...
* FIX: linux: fix the building issue on Linux Mint 21.3 Virginia
github: https://github.com/bambulab/BambuStudio/issues/3874
author: https://github.com/lucianoloder
Change-Id: Ia3db6923d5dd68dba532d7bdba6f93f73cc51d59
* FIX: auto-arranging incorrect with rotation enabled
auto-arranging incorrect with rotation enabled and the objects already have been rotated.
jira: STUDIO-6022
Change-Id: I349d663efb1fc71367c8a77aa8ed5047a0bf2017
(cherry picked from commit 75fe40257a274ed83886e1ee20ce8dedd0de48f6)
* ENH: update X1C & X1E start gcode
1.Fix fan problem
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I68ee5be78e142e8a2a210a1a70f5663893390610
* ENH: update A series gcode
1. Update A1 series start gcode and change filament gcode
2. Add G2814 command
3. Add multi-filament extrusion compensation and vibration suppression
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I57d2bc8e98d3e547881dc1369c1fb31413c6205d
* FIX: fix some cali problem of P series
jira: none
Change-Id: Id57ea8d65da22ab653cca49509cb923ff065e43f
* FIX: fix can't enter ',' in multiplicator
github: #3805
Change-Id: I6dd70822d1c2e79d66c70514d6dd580ab029c7ea
* calib wizard
* NEW: FlipLines infill
jira:6701
New infill pattern that combine block lines infill and switching layers for smooth transition.
Change-Id: I2608a2d39b14efcdfe9d39a9437280da350b94c0
(cherry picked from commit 8d0a09c8b763dfc924cbba9913c241e6afadbc7f)
* ENH: add nozzle blob detection and air printing detection
jira: new
Change-Id: Ie4a19a7ad7d0b10a021c516cbc3a84b4ae734302
* FIX: Top surface bridging fail on 3DHC & FL infill
Add 45 degree angle offset when processing the bridge.
Need to raise infill_direction to invalidate posPrepareInfill
jira: 6774
Change-Id: I5e6bef3aa814b01c5f30398ac745937a67e3ef4c
(cherry picked from commit 7b12cab10b88f432a11414f8caa1c6427777a1ba)
* FIX: the error display when reset virtual slot
jira: none
Change-Id: I5ae5899baf1bfc2aaadb832083b277855a669fd5
* FIX: Error "Voronoi cell doesn't contain a sourcepoint"
github: 3859
Change-Id: Idca84992bcba5380bfe05e63ac9a5e40419dcfdf
* fix build error
* FIX: CLI: fix the crash issue caused by get_min_flush_volumes
JIRA: no jira
Change-Id: I0d5bfd605e51ebddac8fddc4d83dab5055b0fbf2
* FIX: can't use support filament in gcode.3mf
1. Add total_filament_volumes, directly access it to get used filaments
github:#3865
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717
* ENH: p series support long retraction
1. P series support long retraction in filament
2. Add long retraction params in common.json
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ib94184fa1f0b5ab151360f1f053d8c8ff92e7e18
* ENH::modify some logs level
jira:[for log]
Change-Id: I6a46b8fcd3a030b4b630e800fe9a9ac5c387f117
* NEW: support multi device
JIRA: STUDIO-6072
Change-Id: Ic514c4097767b0a728368c9ea48ee103c031fbb0
Signed-off-by: Stone Li <stone.li@bambulab.com >
* ENH: update A1 series gcode
1.Update filament change gcode and machine start gcode for
A1 and A1 mini
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I2f3be3fd89fef21e717a32f2b89985fc046f7f6e
* FIX: always have 0th filament in ams mapping
1. Only set the filament id in map when flush length is not 0
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I6e0aeaf010f6e6dcbdc3bca5c0034aa60750bb67
* ENH: add filament id in slice info
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ic5fe4632bca8acacc9ffd072ee2ed207c1da37aa
* ENH: refine ui for multi machine
JIRA: STUDIO-6819 STUDIO-6824
1. Shrink the Send Print dialog box
2. add input box for flipping panel
Change-Id: I4174c79ecd239c374ee11478951e12be399c57ce
* FIX: fix Issues with sending multiple devices
JIRA: STUDIO-6876
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com >
Change-Id: I33c6a932863fc715c3f0eb5dfd4b299f980a4918
* NEW: support hms error code
Change-Id: Ic256a83cf501fb05bb9d3203f3d24cb1d1290fa4
* FIX:fixed some multi job issue
Change-Id: I338078ad8fcf809888db9d8daeb470a9bf4eab46
* NEW:support pin code binding
Change-Id: Ida5d47881fbd83f3ffedc80369cfe377114d7f13
* ENH:add printable check for devices
Change-Id: I672988fa9cfa986d924bfc64331752f4aef68067
(cherry picked from commit 69de9e5b8334ec94eec7fcee31038b8ff42d1d3b)
* FIX: add more fonts
jira: none
Change-Id: I6bafed3563083858f29e92a3d84906a2e53dcb5c
(cherry picked from commit afbea693e807dcc1c406a59aa5376b9ea2a5d606)
* ENH: load more fonts
this feature is according to Prusa by Filip Sykala<filip.sykala@prusa3d.cz >, thanks to Filip Sykala
jira: none
Change-Id: I55e92f184f750c0b93b679d4382aaa5b164ec5c3
(cherry picked from commit d05522c4cc5d7ee4cac42de398b88d347a55f74b)
* ENH: add ProfileDescription for translate
1.Add ProfileDescription.hpp simply for translating
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com >
Change-Id: Iaa3ced1edccf67eaeebde35c1e8b36442d2e9a6f
* ENH: Improve CrossHatch transation layers
jira: 6701
Change name from Flippingline to CrossHatch.
Reduce noise, improve speed by 6.5%. Improve transation layers by
gradually increasing rotation angle and overshoot the transation
layer while direction changed.
Change-Id: I17fcc45b409074d121bf5bb5702e15553d925b51
* UP
* ENH: modify the default config for multi-device
JIRA: STUDIO-6072
Change-Id: If6e7582a8274eb5e685b8b8545f6eab5d17de3f5
Signed-off-by: Stone Li <stone.li@bambulab.com >
* ENH: add long retraction for P series
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I6890695b67e674fc5cdc2a208e89bd9e41404213
* FIX: all plates stats data missing issue
jira: new
Change-Id: I137a2b6d69ad08791f5a9a9788653621960dc63f
* ENH:update pre print options
jira:[for multi]
Change-Id: I2e9bb8a09436a71749af98a0bad94e9922f95c81
* FIX:fixed can't popup pinbind win on macos
jira:[STUDIO-6895]
Change-Id: I664bba78cf27420d736b586df19e3c09c6f8ed21
* FIX:fixed the task of padding cannot be cancelled
Change-Id: I401a22118c14ca7601be7a925cfd8e4796dfc1e9
* ENH:Play video after redirecting to device page
jira:[STUDIO-6884]
Change-Id: Ia5e2ac84e3d71baacfcf941b782dab2325f35d54
* FIX: fix ui bug in send multi machine page for mac
JIRA: STUDIO-6882
Incorrect background color when renaming during multi machine printing
Change-Id: I6c551f5023ffe747e7a7e2f5703b0707c9505922
* FIX: Fix some bugs in maintaining the selected status of local tasks
JIRA: STUDIO-6824
Change-Id: I12c4da3fc56ac5077b3ccd7e89a4b57c3675eaf5
* ENH: local task sort by send time by default
JIRA: STUDIO-6885
Change-Id: I03b5881a39ab2e90c5b9cf46052ba465ee707ccc
* FIX: Clicking to continue printing does not take effect in error code
JIRA: STUDIO-6830
Detected an incomplete printing task error pop-up when power outage occurred. Clicking to continue printing did not take effect
Change-Id: Ie85a1602093dabac861cd1f41ea21e1c312c83e9
* ENH: use designTitle when designId > 0
JIRA: STUDIO-6072
Change-Id: I8342df053edeab16f930522e099e2eef91e5c5a4
Signed-off-by: Stone Li <stone.li@bambulab.com >
* NEW:import vertex and mtl color from obj file
Jira: STUDIO-6805
Change-Id: Iaacb13ee2451effdb83e5aba4b7fe1637b7fc95f
* FIX:change the strategy of merge_ka_kd
Upgrade ui, users can directly ok to proceed to the next step
jira: STUDIO-6805
Change-Id: Ia81019c2eacb503666680c0b8583d026baa0134c
(cherry picked from commit 38a2434753c8e3b422267283b16c75f6ad195b14)
* FIX:use default_strategy after modifed cluster number
jira: STUDIO-6915
Change-Id: I4e0c3d62f5a766f73d48d1e06c4364fc6babe1ac
* FIX: the bug of incorrect button without restarting
JIRA: STUDIO-6824
The bug can cause the user to not restart when opening the multi-device option, but the button of send multi-devices appears
Change-Id: I0837fa79ecc1d8ab5ce98273ad134fa2f830421e
* FIX: wrong default value for long retraction
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ifc2ec57a320fdb14e7ca746e5795501ed146ff32
* FIX: error code pop-up window without retry button in some code
JIRA: STUDIO-6922
Change-Id: I67464bebaba4558618301592c455db8824bbfe30
* FIX: air printing and nozzle blob detection issue
jira: STUDIO-6897
Change-Id: I008ddb24b74119d7e4124ae26310b4b86c42a799
* FIX:fix bugs of algo and read quad in obj file
Jira: STUDIO-6805
Change-Id: I6c33e8197225f27dccdfa0681e64d76d1df14f61
* dd
* ENH:Set the default nozzle diameter to 0.4
jira:[for nozzle]
Change-Id: I74a5c9b0460046496b897eae3d9f917ac1b99052
* FIX:fixed backspace error on macos
Change-Id: I76066391783c04857c1a60a6f8438111501b6d7c
* ENH:Subscription list deduplication
jira:[for mulit]
Change-Id: I10e9d849986c9661b587c7b1a509180c2451816e
* ENH:update wiki url for Pin Code
jira:[pin code]
Change-Id: I95faaa396a839b5b159119ef235b650c76706a84
* NEW:add OpenCV.cmake in deps
jira: none
Change-Id: I1ae4a2bd5618e9e620b08a937904d6af5d00bc41
* FIX:cancel obj import restrictions
jira: none
Change-Id: Iaf3e799ca982ad6aeb3ec76e9a416c4c8e4d100c
* NEW:add multiple printer restrictions
jira:[for multiple]
Change-Id: I0bb5a0c1062a543c42f8d67a9347efa358b0864a
* ENH:Added two entrances for adding devices
jira:[multi device]
Change-Id: Ieb6197e067d422979606f93b22b337a2399aec74
* slic3r: Fix wxFont being undefined
[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
In file included from /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:1:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.hpp:51:21: error: ‘wxFont’ does not name a type
51 | bool can_load(const wxFont &font);
| ^~~~~~
* slic3r: Fix missing BOOST_LOG_TRIVIAL declaration
[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp: In function ‘std::unique_ptr<Slic3r::FontFile> Slic3r::create_font_file(const char*)’:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:127:27: error: ‘error’ was not declared in this scope; did you mean ‘perror’?
127 | BOOST_LOG_TRIVIAL(error) << "Couldn't open " << file_path << " for reading.";
| ^~~~~
| perror
[447/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp
In file included from /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp:1:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp: In member function ‘void Slic3r::TaskStateInfo::set_state(Slic3r::TaskState)’:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp:40:9: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
40 | BOOST_LOG_TRIVIAL(trace) << "TaskStateInfo set state = " << get_task_state_enum_str(ts);
| ^~~~~~~~~~~~~~~~~
* fix OpenCV
* wip - build break
* fix build error wip
* ENH: support preset description(tooltip)
Change-Id: Iff005baac4974c538d1109fb0ba1df20b04a8f69
Jira: STUDIO-5754
* fix more build errors
* Revert "ENH: load more fonts"
This reverts commit 32b6fd199ac50e21db1f72089e5b3287a1776e04.
* change colors
* misc fixes
* restore export gcode btn
---------
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Signed-off-by: Stone Li <stone.li@bambulab.com >
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com >
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com >
Co-authored-by: lane.wei <lane.wei@bambulab.com >
Co-authored-by: Arthur <arthur.tang@bambulab.com >
Co-authored-by: xun.zhang <xun.zhang@bambulab.com >
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com >
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com >
Co-authored-by: jianjia.ma <jianjia.ma@bambulab.com >
Co-authored-by: liz.li <liz.li@bambulab.com >
Co-authored-by: tao wang <tao.wang@bambulab.com >
Co-authored-by: Stone Li <stone.li@bambulab.com >
Co-authored-by: zhou.xu <zhou.xu@bambulab.com >
Co-authored-by: Bastien Nocera <hadess@hadess.net >
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com >
2024-04-28 22:58:47 +08:00
