* Infill Line Multiplier
* Modular Offset Function
* Lightning multiline
* Crosshatch Multiline
ipCrosshatch
* cleaning
Cleaning
clean2
* 3d Honeycomb
cut poliline ends
* Fill Tpmsd Multiline
Fill Tpmsd Multiline
* Update Multiline function
multiline funcion simplify
* Update FillTpmsD
* FillHoneycomb
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix Honeycomb Multiline
Simplify polylines in honeycomb infill generation
* Improve multiline infill support and pattern simplification
Moved multiline infill application after pattern translation and simplification in Fill3DHoneycomb, and added multiline support to FillAdaptive. Updated honeycomb and 3D honeycomb infill to simplify polylines to 5x line width. Extended GUI and config to support multiline for Adaptive Cubic infill pattern and clarified max value comment.
minimum changes
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Increase multiline fill spacing in honeycomb infill
Adjusts the spacing parameter in the multiline_fill function to 1.1 times the original spacing, potentially improving infill distribution or print quality.
* Refine fill_multiline tooltip and pattern support logic
Updated the tooltip for the 'fill_multiline' parameter to improve clarity and punctuation. Refactored the logic in ConfigManipulation.cpp to clarify which infill patterns support multiline infill.
* better management of non supported infill patterns
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* fix: Set the default value for the skeleton infill width to 0 fork skipping the min check
* fix: Update default value for skeleton infill line width to 100%
* Create top surface density option
* Update tooltip
* Specify what 0% top infill means
* Add density for bottom layers
* Discourage users from using top/bottom density incorrectly
* Fix percent don't need translation
* Fix incorrect indentation
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* SPE-2405: Add Zig Zag infill that is rectilinear infill but with a consistent pattern between layers.
This Zig Zag infill is inspired by the Zig Zag infill in Cura.
Change-Id: I798affa99f4b5c3bd67f47643e67530fb7c3e0cb
(cherry picked from commit 2808d04d5deef6f99f9618648e46f11de03efc98)
* Add Cross zag and locked-zag for shoes
Ported from BambuStudio
* wip
* sparse infill roratation template
* solid_infill_rotate_template
* remove rotate_solid_infill_direction
* hide sparse infill rotation template for non applicable infill pattern
* hide solid_infill_rotate_template for non supported solid infill patterns
* update icon
* support empty string for ConfigOptionFloats deserialize
* fix build errors
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Generate support interface iron extrusion
* Always ironing last
* Add options
* Move ironing speed to speed tab
* Don't iron places that are covered by upper support layers
* Disable support interface spacing settings when support ironing is enabled
* Update text
* Fix punctuation of enumerations
* Add missing '?' at the end of questions on hints
* Add periods after error messages
* Add punctuation to all tooltips
* Add missing periods on the pt-BR translation
* Add new Bambu RIB wall feature, including only the rib wall generation algorithm.
* Fix Linux compilation errors.
* Attempt to fix flatpak build
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Remove extra spaces between words
* Remove extra spaces after punctuation
* Remove extra spaces before punctuation
* Always needs a space after punctuation
* Always needs a space before parens
* Remove trailing spaces before newline
* Junction Deviation Machine Limit
jd 3
JD menu 2
JD operativo
limpieza
final
* default JD print menu without warnings
* to fix multiple instances
* Only at first layer
* Calibs upgrade
* Shown on Marlin2
Shown on Marlin2
CodeCleaning
* Update Calibration.md
* set on writer
---------
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* First set of fixes
* Add FLEX filament to PrintConfig.cpp
* Add new FLEX filament profiles to main Prusa json
* Comment out M104.1 code
* Revert "Comment out M104.1 code"
This reverts commit 831414adb75fa98b3d6aadda38a5936f04d6530c.
* Use ipArchimedeanChords pattern for flow rate calibration
* Merge branch 'main' into feature/different_pattern_flowrate
* improve order
* Merge branch 'main' into feature/different_pattern_flowrate
* Introduce option to control number of skirt walls after first layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* One wall draft shield options refactor
* Merge remote-tracking branch 'upstream/main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Renamed to single loop draft shield
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Added Elegoolink connection
* Set Elegoo CC default bed to btPTE
* Friendly output of some error codes of PrintHost
* feat: Add elegoo centauri carbon profile
* fix: Fix the issue where the bed type in the printer configuration does not match the bed temperature settings when multiple bed types are not supported.
* feat: Modify the elegoo process parameters to disable slowdown_for_curled_perimeters.
* feat: Update comment to clarify plate visibility for multi bed support, BBL printer, and selected bed type.
* fix: Optimize ElegooLink upload; The code is clearer than before.
* feat: Format the ElegooPrintHostSendDialog code.
* fix: Remove the unnecessary instantiation attribute in the Elegoo process.
* fix: Flatpak compilation failed
---------
Co-authored-by: anjis <anjis.zhou@elegoo.com>
