.gitignore

@@ -7,3 +7,5 @@ dist/
 releases/*/kx-bridge
 releases/*/extract_credentials
 releases/*/extract_credentials.exe
+config/config.ini
+data

config.ini.example

@@ -1,34 +0,0 @@
-# KX-Bridge Konfigurationsdatei
-# Kopiere diese Datei nach config.ini und trage deine Werte ein:
-#   cp config.ini.example config.ini
-#
-# Credentials mit extract_credentials.exe (Windows) oder
-# extract_credentials (Linux) aus dem laufenden AnycubicSlicerNext auslesen.
-
-[connection]
-# IP-Adresse des Druckers im lokalen Netzwerk
-printer_ip   = 192.168.x.x
-
-# MQTT-Port (Anycubic Kobra X Standard: 9883)
-mqtt_port    = 9883
-
-# MQTT-Zugangsdaten (druckerspezifisch, beginnt mit "user")
-username     = userXXXXXXXXXX
-password     = XXXXXXXXXXXXXXX
-
-# Geräte-ID (32-stelliger Hex-String, druckerspezifisch)
-device_id    = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-
-# Modell-ID (Kobra X Standard: 20030)
-mode_id      = 20030
-
-[print]
-# Standard-AMS-Slot für Einfarbdruck (auto = alle belegten Slots, 0-3 = fixer Slot)
-default_ams_slot = auto
-
-# Auto-Leveling vor jedem Druck (1 = an, 0 = aus)
-auto_leveling    = 1
-
-[bridge]
-# Poll-Intervall in Sekunden
-poll_interval    = 3

config/config.ini.example

@@ -34,3 +34,29 @@ auto_leveling    = 1
 [bridge]
 # Poll-Intervall in Sekunden
 poll_interval    = 3
+
+[ace_dry_presets]
+# Vordefinierte Dry-Set Presets (Temp in °C, Dauer in Sekunden)
+pla_temp = 45
+pla_duration_sec = 14400
+pla_plus_temp = 45
+pla_plus_duration_sec = 14400
+petg_temp = 50
+petg_duration_sec = 14400
+tpu_temp = 55
+tpu_duration_sec = 14400
+abs_asa_temp = 45
+abs_asa_duration_sec = 28800
+pa_pc_temp = 55
+pa_pc_duration_sec = 43200
+
+# Custom Presets (Name + Temp + Dauer)
+custom_1_name = Custom 1
+custom_1_temp = 45
+custom_1_duration_sec = 14400
+custom_2_name = Custom 2
+custom_2_temp = 45
+custom_2_duration_sec = 14400
+custom_3_name = Custom 3
+custom_3_temp = 45
+custom_3_duration_sec = 14400