Merge branch 'main' into release/v2.4

.github/workflows/build_all.yml

@@ -14,6 +14,7 @@ on:
      - 'resources/**'
      - ".github/workflows/build_*.yml"
      - 'scripts/flatpak/**'
+     - 'scripts/msix/**'
 
   pull_request:
     branches:
@@ -30,6 +31,7 @@ on:
      - 'build_release_vs2022.bat'
      - 'build_release_macos.sh'
      - 'scripts/flatpak/**'
+     - 'scripts/msix/**'
 
 
   schedule:

.github/workflows/build_orca.yml

@@ -371,6 +371,25 @@ jobs:
           asset_content_type: application/x-msdownload
           max_releases: 1
 
+      - name: Build MSIX Store package Win
+        if: runner.os == 'Windows' && !vars.SELF_HOSTED
+        working-directory: ${{ github.workspace }}
+        shell: pwsh
+        run: |
+          ./scripts/msix/build_msix.ps1 `
+            -InstallDir "${{ github.workspace }}/build/OrcaSlicer" `
+            -OutputPath "${{ github.workspace }}/build/OrcaSlicer_Windows_MSIX_${{ env.ver }}.msix" `
+            -IdentityName "${{ vars.ORCA_MSIX_IDENTITY_NAME || 'OrcaSlicer.OrcaSlicer' }}" `
+            -Publisher "${{ vars.ORCA_MSIX_PUBLISHER || 'CN=38F7EA55-C73B-4072-B3B2-C8E0EA15BB82' }}" `
+            -PublisherDisplayName "${{ vars.ORCA_MSIX_PUBLISHER_DISPLAY_NAME || 'OrcaSlicer' }}"
+
+      - name: Upload artifacts Win MSIX
+        if: runner.os == 'Windows' && !vars.SELF_HOSTED
+        uses: actions/upload-artifact@v7
+        with:
+          name: OrcaSlicer_Windows_MSIX_${{ env.ver }}
+          path: ${{ github.workspace }}/build/OrcaSlicer_Windows_MSIX_${{ env.ver }}.msix
+
 # Ubuntu
       - name: Apt-Install Dependencies
         if: runner.os == 'Linux' && !vars.SELF_HOSTED

.github/workflows/publish_release.yml

@@ -73,8 +73,9 @@ jobs:
 
       - name: Download release artifacts from build run
         run: |
+          # Windows_V* (not Windows_*) keeps the MSIX Store artifact out: it goes to Partner Center, not GitHub releases.
           gh run download "$RUN_ID" --repo "$GITHUB_REPOSITORY" --dir artifacts \
-            -p 'OrcaSlicer_Windows_*' \
+            -p 'OrcaSlicer_Windows_V*' \
             -p 'OrcaSlicer_Mac_universal_*' \
             -p 'OrcaSlicer_Linux_ubuntu_*' \
             -p 'OrcaSlicer-Linux-flatpak_*' \

localization/i18n/de/OrcaSlicer_de.po

@@ -1873,12 +1873,14 @@ msgid ""
 "You are currently in Stealth Mode. To log into the Cloud, you need to "
 "disable Stealth Mode first."
 msgstr ""
+"Sie befinden sich derzeit im Stealth-Modus. Um sich in der Cloud anzumelden, "
+"müssen Sie zunächst den Stealth-Modus deaktivieren."
 
 msgid "Stealth Mode"
-msgstr ""
+msgstr "Stealth-Modus"
 
 msgid "Quit Stealth Mode"
-msgstr ""
+msgstr "Stealth-Modus verlassen"
 
 msgid "new or open project file is not allowed during the slicing process!"
 msgstr ""
@@ -1900,20 +1902,31 @@ msgid ""
 "Pull downloads the cloud copy. Force push overwrites it with your local "
 "preset."
 msgstr ""
+"Cloud-Synchronisationskonflikt: Dieses Profil hat eine neuere Version in "
+"OrcaCloud.\n"
+"Pull lädt die Cloud-Kopie herunter. Force Push überschreibt sie mit Ihrem "
+"lokalen Profil."
 
 msgid ""
 "Cloud sync conflict: a preset with this name already exists in OrcaCloud.\n"
 "Pull downloads the cloud copy. Force push overwrites it with your local "
 "preset."
 msgstr ""
+"Cloud-Synchronisationskonflikt: Ein Profil mit diesem Namen existiert bereits "
+"in OrcaCloud.\n"
+"Pull lädt die Cloud-Kopie herunter. Force Push überschreibt sie mit Ihrem "
+"lokalen Profil."
 
 msgid ""
 "Force push will overwrite the cloud copy with your local preset changes.\n"
 "Do you want to continue?"
 msgstr ""
+"Force Push überschreibt die Cloud-Kopie mit Ihren lokalen Profiländerungen.\n"
+"Möchten Sie fortfahren?"
 
 msgid "Resolve cloud sync conflict"
 msgstr ""
+"Cloud-Synchronisationskonflikt lösen"
 
 msgid "Retrieving printer information, please try again later."
 msgstr "Empfange Druckerinformationen, bitte später erneut versuchen."
@@ -2231,7 +2244,7 @@ msgid "Orca Cube"
 msgstr "Orca Würfel"
 
 msgid "OrcaSliced Combo"
-msgstr ""
+msgstr "OrcaSliced Kombination"
 
 msgid "Orca Tolerance Test"
 msgstr "Orca Toleranz Test"
@@ -5670,7 +5683,7 @@ msgid "Outline"
 msgstr "Umriss"
 
 msgid "Realistic View"
-msgstr ""
+msgstr "Realistische Ansicht"
 
 msgid "Perspective"
 msgstr "Perspektive"
@@ -5980,7 +5993,7 @@ msgid "Show Configuration Folder"
 msgstr "Konfigurationsordner anzeigen"
 
 msgid "Troubleshoot Center"
-msgstr ""
+msgstr "Fehlerbehebungszentrum"
 
 msgid "Open Network Test"
 msgstr "Netzwerktest öffnen"
@@ -6024,10 +6037,10 @@ msgid "Rear"
 msgstr "Hinten"
 
 msgid "Rear View"
-msgstr "Ansicht von Hinten"
+msgstr "Ansicht von hinten"
 
 msgid "Left View"
-msgstr "Anicht von Links"
+msgstr "Ansicht von links"
 
 msgid "Right View"
 msgstr "Ansicht von rechts"
@@ -7371,10 +7384,10 @@ msgid "Model file downloaded."
 msgstr "Modelldatei heruntergeladen."
 
 msgid "Pull"
-msgstr ""
+msgstr "Herunterladen"
 
 msgid "Force push"
-msgstr ""
+msgstr "Hochladen erzwingen"
 
 msgid "Shared profiles may be available for this printer."
 msgstr "Für diesen Drucker sind möglicherweise freigegebene Profile verfügbar."
@@ -8449,10 +8462,10 @@ msgstr ""
 "werden nur positive Teile exportiert."
 
 msgid "Flashforge host is not available."
-msgstr ""
+msgstr "Flashforge-Host ist nicht verfügbar."
 
 msgid "Unable to log in to the Flashforge printer."
-msgstr ""
+msgstr "Anmeldung am Flashforge-Drucker nicht möglich."
 
 msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
 msgstr ""
@@ -9031,22 +9044,22 @@ msgid "Graphics"
 msgstr "Grafik"
 
 msgid "Phong shading"
-msgstr ""
+msgstr "Phong-Shading"
 
 msgid "Uses Phong shading inside realistic view."
-msgstr ""
+msgstr "Verwendet Phong-Shading in der realistischen Ansicht."
 
 msgid "SSAO ambient occlusion"
-msgstr ""
+msgstr "SSAO-Umgebungsverdeckung"
 
 msgid "Applies SSAO in realistic view."
-msgstr ""
+msgstr "Wendet SSAO in der realistischen Ansicht an."
 
 msgid "Shadows"
-msgstr ""
+msgstr "Schatten"
 
 msgid "Renders cast shadows on the plate in realistic view."
-msgstr ""
+msgstr "Zeigt geworfene Schatten auf der Platte in der realistischen Ansicht an."
 
 msgid "Anti-aliasing"
 msgstr "Kantenglättung"
@@ -9126,12 +9139,16 @@ msgid ""
 "Note: When Stealth Mode is enabled, your user profiles will not be backed up "
 "to Orca Cloud."
 msgstr ""
+"Dies deaktiviert alle Cloud-Funktionen, einschließlich der Profil-Synchronisierung "
+"mit Orca Cloud. Benutzer, die es vorziehen, vollständig offline zu arbeiten, "
+"können diese Option aktivieren.\n"
+"Hinweis: Wenn der Unsichtbare Modus aktiviert ist, werden Ihre Benutzerprofile nicht in Orca Cloud gesichert."
 
 msgid "Hide login side panel"
-msgstr ""
+msgstr "Login-Seitenleiste ausblenden"
 
 msgid "Hide the login side panel on the home page."
-msgstr ""
+msgstr "Blendet die Login-Seitenleiste auf der Startseite aus."
 
 msgid "Network test"
 msgstr "Netzwerktest"
@@ -9299,12 +9316,14 @@ msgstr ""
 "Sehr experimentell! Langsam und kann Artefakte erzeugen."
 
 msgid "Show unsupported presets"
-msgstr ""
+msgstr "Nicht unterstützte Profile anzeigen"
 
 msgid ""
 "Show incompatible/unsupported presets in the printer and filament dropdown "
 "lists. These presets cannot be selected."
 msgstr ""
+"Zeigt inkompatible/nicht unterstützte Profile in den Dropdown-Listen für "
+"Drucker und Filament an. Diese Profile können nicht ausgewählt werden."
 
 msgid "Allow Abnormal Storage"
 msgstr "Fehlerhaften Speicher zulassen"
@@ -10966,6 +10985,11 @@ msgid ""
 "\n"
 "Shall I set it to 100% in order to enable Firmware Retraction?"
 msgstr ""
+"Die Option Rückzug vor Wischen kann nur 100% sein, wenn der Modus Filament "
+"Rückzug durch Firmware verwendet wird.\n"
+"\n"
+"Soll ich es auf 100% setzen, um den Filament Rückzug durch Firmware zu "
+"aktivieren?"
 
 msgid "Firmware Retraction"
 msgstr "Filament Rückzug durch Firmware"
@@ -12720,17 +12744,23 @@ msgid "Layer height cannot exceed nozzle diameter."
 msgstr "Schichthöhe darf den Düsendurchmesser nicht überschreiten."
 
 msgid "Bridge line width must not exceed nozzle diameter"
-msgstr ""
+msgstr "Die Breite der Brückenlinie darf den Düsendurchmesser nicht überschreiten."
 
 msgid ""
 "\"G92 E0\" was found in before_layer_change_gcode, but the G or E are not "
 "uppercase. Please change them to the exact uppercase \"G92 E0\"."
 msgstr ""
+"\"G92 E0\" wurde in before_layer_change_gcode gefunden, aber G oder E sind "
+"nicht großgeschrieben. Bitte ändern Sie sie in das exakte Großgeschriebene "
+"\"G92 E0\"."
 
 msgid ""
 "\"G92 E0\" was found in layer_change_gcode, but the G or E are not "
 "uppercase. Please change them to the exact uppercase \"G92 E0\"."
 msgstr ""
+"\"G92 E0\" wurde in layer_change_gcode gefunden, aber G oder E sind "
+"nicht großgeschrieben. Bitte ändern Sie sie in das exakte Großgeschriebene "
+"\"G92 E0\"."
 
 msgid ""
 "Relative extruder addressing requires resetting the extruder position at "
@@ -12745,6 +12775,8 @@ msgid ""
 "\"G92 E0\" was found in before_layer_change_gcode, which is incompatible "
 "with absolute extruder addressing."
 msgstr ""
+"\"G92 E0\" wurde in before_layer_change_gcode gefunden, was mit absoluter "
+"Extruderadressierung nicht kompatibel ist."
 
 msgid ""
 "\"G92 E0\" was found in layer_change_gcode, which is incompatible with "
@@ -12859,29 +12891,32 @@ msgid "Extruder printable area"
 msgstr "Druckbarer Bereich des Extruders"
 
 msgid "Support parallel printheads"
-msgstr ""
+msgstr "Unterstützung paralleler Druckköpfe"
 
 msgid ""
 "Enable printer settings for machines that can use multiple printheads in "
 "parallel."
-msgstr ""
+msgstr "Aktivieren Sie die Druckereinstellungen für Maschinen, die mehrere Druckköpfe parallel verwenden können."
 
 msgid "Parallel printheads count"
-msgstr ""
+msgstr "Anzahl der parallelen Druckköpfe"
 
 msgid ""
 "Set the number of parallel printheads for machines like OrangeStorm Giga "
 "printer."
-msgstr ""
+msgstr "Legen Sie die Anzahl der parallelen Druckköpfe für Maschinen wie den OrangeStorm Giga Drucker fest."
 
 msgid "Parallel printheads bed exclude areas"
-msgstr ""
+msgstr "Druckbett-Ausschlussbereiche für parallele Druckköpfe"
 
 msgid ""
 "Ordered list of bed exclude areas by parallel printhead count. Item 1 "
 "applies to one printhead, item 2 to two printheads, and so on. Leave an item "
 "empty for no excluded area."
 msgstr ""
+"Geordnete Liste der Druckbett-Ausschlussbereiche nach Anzahl der parallelen "
+"Druckköpfe. Punkt 1 gilt für einen Druckkopf, Punkt 2 für zwei Druckköpfe und so "
+"weiter. Lassen Sie einen Punkt leer, wenn keine Ausschlussbereiche vorhanden sind."
 
 msgid "Bed exclude area"
 msgstr "ausgenommene Druckbettfläche"
@@ -13029,10 +13064,10 @@ msgstr ""
 "erforderliche Passwort enthalten."
 
 msgid "Serial Number"
-msgstr ""
+msgstr "Seriennummer"
 
 msgid "Flashforge local API requires the printer serial number."
-msgstr ""
+msgstr "Die lokale Flashforge-API erfordert die Seriennummer des Druckers."
 
 msgid "Name of the printer."
 msgstr "Name des Druckers"
@@ -13405,6 +13440,17 @@ msgid ""
 "\n"
 "Use 180° for zero absolute angle."
 msgstr ""
+"Externe Brückenwinkelüberschreibung.\n"
+"Wenn auf Null gelassen, wird der Brückenwinkel automatisch für jede "
+"spezifische Brücke berechnet.\n"
+"Ansonsten wird der angegebene Winkel wie folgt verwendet:\n"
+" - Die absoluten Koordinaten\n"
+" - Die absoluten Koordinaten + Modellrotation: Wenn 'Füllrichtung an Modell "
+"ausrichten' aktiviert ist\n"
+" - Der optimale automatische Winkel + dieser Wert: Wenn 'Relativer "
+"Brückenwinkel' aktiviert ist\n"
+"\n"
+"Verwenden Sie 180° für einen absoluten Winkel von Null."
 
 msgid "Internal bridge infill direction"
 msgstr "Interne Brücken Füllrichtung"
@@ -13422,14 +13468,27 @@ msgid ""
 "\n"
 "Use 180° for zero absolute angle."
 msgstr ""
+"Interne Brückenwinkelüberschreibung.\n"
+"Wenn auf Null gelassen, wird der Brückenwinkel automatisch für jede "
+"spezifische Brücke berechnet.\n"
+"Ansonsten wird der angegebene Winkel wie folgt verwendet:\n"
+" - Die absoluten Koordinaten\n"
+" - Die absoluten Koordinaten + Modellrotation: Wenn 'Füllrichtung an Modell "
+"ausrichten' aktiviert ist\n"
+" - Der optimale automatische Winkel + dieser Wert: Wenn 'Relativer "
+"Brückenwinkel' aktiviert ist\n"
+"\n"
+"Verwenden Sie 180° für einen absoluten Winkel von Null."
 
 msgid "Relative bridge angle"
-msgstr ""
+msgstr "Relativer Brückenwinkel"
 
 msgid ""
 "When enabled, the bridge angle values are added to the automatically "
 "calculated bridge direction instead of overriding it."
 msgstr ""
+"Wenn aktiviert, werden die Brückenwinkelwerte zur automatisch berechneten "
+"Brückenrichtung hinzugefügt, anstatt sie zu überschreiben."
 
 msgid "External bridge density"
 msgstr "Externe Brücken Dichte"
@@ -13453,6 +13512,19 @@ msgid ""
 "\n"
 "Recommended range: Minimum 10% - Maximum 125%."
 msgstr ""
+"Steuert die Dichte (Abstand) der Linien der externen Brücke. Standard ist 100%.\n"
+"Theoretisch bedeutet 100% eine solide Brücke, aber aufgrund der Neigung von "
+"Brückenextrusionen zum Durchhängen, ist 100% möglicherweise nicht ausreichend.\n"
+"\n"
+"- Höher als 100% Dichte (Empfohlen Max 125%):\n"
+"  - Vorteile: Erzeugt glattere Brückenoberflächen, da sich überlappende Linien während des Druckens zusätzliche Unterstützung bieten.\n"
+"  - Nachteile: Kann zu Überextrusion führen, was die Qualität der unteren und oberen Oberfläche verringern und das Risiko von Verzug erhöhen kann.\n"
+"\n"
+"- Niedriger als 100% Dichte (Min 10%):\n"
+"  - Vorteile: Kann eine fadenartige erste Schicht erzeugen. Schneller und mit besserer Kühlung, da mehr Platz für die Luftzirkulation um die extrudierte Brücke vorhanden ist.\n"
+"  - Nachteile: Kann zu Durchhängen und schlechterer Oberflächenqualität führen.\n"
+"\n"
+"Empfohlener Bereich: Minimum 10% - Maximum 125%."
 
 msgid "Internal bridge density"
 msgstr "Interne Brücken Dichte"
@@ -13480,6 +13552,28 @@ msgid ""
 "bridge over infill option to improve bridging further before solid infill is "
 "extruded."
 msgstr ""
+"Steuert die Dichte (Abstand) der Linien der internen Brücke. Standard ist 100%. "
+"100% bedeutet eine solide interne Brücke.\n"
+"\n"
+"Interne Brücken wirken als Zwischenstütze zwischen lockerer Füllung und "
+"oberer festen Füllung und können die Qualität der Oberseite stark beeinflussen.\n"
+"\n"
+"- Höher als 100% Dichte (Empfohlen Max 125%):\n"
+"  - Vorteile: Verbessert die Stärke der internen Brücke und die Unterstützung "
+"unter den oberen Schichten, reduziert das Durchhängen und verbessert die "
+"Oberflächenqualität.\n"
+"  - Nachteile: Erhöht den Materialverbrauch und die Druckzeit; eine zu hohe "
+"Dichte kann zu Überfüllung und inneren Spannungen führen.\n"
+"\n"
+"- Niedriger als 100% Dichte (Min 10%):\n"
+"  - Vorteile: Kann das Pillowing reduzieren und die Kühlung verbessern (mehr "
+"Luftzirkulation durch die Brücke), und kann den Druck beschleunigen.\n"
+"  - Nachteile: Kann die innere Unterstützung reduzieren und das Risiko von "
+"Durchhängen und Defekten auf der Oberseite erhöhen.\n"
+"\n"
+"Diese Option funktioniert besonders gut in Kombination mit der zweiten internen "
+"Brücke über Füllungsoption, um die Brückenbildung weiter zu verbessern, bevor "
+"die obere feste Füllung extrudiert wird."
 
 msgid "Bridge flow ratio"
 msgstr "Brücken Flussrate"
@@ -13505,6 +13599,15 @@ msgid ""
 "The maximum value is 100% or the nozzle diameter.\n"
 "If set to 0, the line width will match the Internal solid infill width."
 msgstr ""
+"Die Brückenlinienbreite wird entweder als absoluter Wert oder als Prozentsatz "
+"des aktiven Düsendurchmessers angegeben (Prozentsätze werden vom Düsendurch- "
+"messer berechnet).\n"
+"Wird empfohlen, in Verbindung mit einer höheren Brückendichte oder einer "
+"höheren Brückenflussrate zu verwenden.\n"
+"\n"
+"Der maximale Wert beträgt 100% oder der Düsendurchmesser.\n"
+"Wenn auf 0 gesetzt, entspricht die Linienbreite der Breite der inneren "
+"festen Füllung."
 
 msgid "Internal bridge flow ratio"
 msgstr "Interne Brücken Flussrate"
@@ -13521,6 +13624,15 @@ msgid ""
 "The actual bridge flow used is calculated by multiplying this value with the "
 "filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
+"Dieser Wert steuert die Dicke der internen Brückenlage. Dies ist die erste "
+"Schicht über der lockeren Füllung, daher kann eine Erhöhung die Festigkeit und ""die Qualität der oberen Schicht verbessern.\n"
+"Werte über 1.0: Erhöhen die Materialmenge bei gleichbleibendem Linienabstand. Dies kann die "
+"Linienkontakt und Festigkeit verbessern.\n"
+"Werte unter 1.0: Reduzieren die Materialmenge bei Anpassung des Linienabstands, um den Kontakt aufrechtzuerhalten. Dies kann das Durchhängen verbessern.\n"
+"\n"
+"Der tatsächliche Brückenfluss wird berechnet, indem dieser Wert mit dem "
+"Filamentflussverhältnis und, falls festgelegt, dem Objektflussverhältnis "
+"multipliziert wird."
 
 msgid "Top surface flow ratio"
 msgstr "Durchflussverhältnis obere Fläche"
@@ -13909,6 +14021,30 @@ msgid ""
 "For example, when the perimeters are 100% overhanging, with no wall "
 "supporting them from underneath, the 100% overhang speed will be applied."
 msgstr ""
+"Aktivieren Sie diese Option, um den Druck in Bereichen zu verlangsamen, in "
+"denen sich die Umfänge möglicherweise nach oben gekrümmt haben.\n"
+"Zum Beispiel wird bei der Druckung von Überhängen an scharfen Ecken wie dem "
+"Vorderteil der Benchy-Hülle eine zusätzliche Verlangsamung angewendet, um "
+"das Krümmen zu reduzieren, das sich über mehrere Schichten hinweg "
+"verstärkt.\n"
+"\n"
+"Es wird in der Regel empfohlen, diese Option aktiviert zu lassen, es sei "
+"denn, Ihre Druckerkühlung ist stark genug oder die Druckgeschwindigkeit ist "
+"langsam genug, sodass sich Umfänge nicht krümmen. \n"
+"Wenn Sie mit einer hohen externen Umfangsgeschwindigkeit drucken, kann dieser "
+"Parameter bei der Verlangsamung Wandartefakte verursachen, da die "
+"potentiell große Varianz der Druckgeschwindigkeiten den Extruder daran "
+"hindert, dem geforderten Fließänderungsverlauf zu folgen.\n"
+"Die Ursache dieser Artefakte ist in der Regel eine leicht abweichende PA-"
+"Einstellung, insbesondere in Kombination mit einer hohen PA-Glättungszeit.\n"
+"\n"
+"Empfehlungen bei Aktivierung dieser Option:\n"
+"1. Reduzieren Sie die Glättungszeit des Druckvorschubs auf 0,015 - 0,02, damit der Extruder schnell auf Geschwindigkeitsänderungen reagieren kann.\n"
+"2. Erhöhen Sie die Mindestdruckgeschwindigkeiten, um die Schwankung zwischen den schnellen und langsamen Segmenten zu begrenzen.\n"
+"3. Wenn Artefakte weiterhin auftreten, aktivieren Sie die Glättung der Extrusionsrate (ERS), um die Übergänge der Fließrate weiter zu glätten.\n"
+"\n"
+"Hinweis: Wenn diese Option aktiviert ist, werden die Überhangumfänge wie Überhänge behandelt, was bedeutet, dass die Überhanggeschwindigkeit auch dann angewendet wird, wenn der überhängende Umfang Teil einer Brücke ist.\n"
+"Zum Beispiel wird bei den Umfängen, die zu 100 % überhängen, wobei keine Wand darunter liegt, die 100 % Überhanggeschwindigkeit angewendet."
 
 msgid "mm/s or %"
 msgstr "mm/s o. %"
@@ -14199,6 +14335,10 @@ msgid ""
 "If disabled, bridges may look better but are generally reliable only for "
 "shorter spans."
 msgstr ""
+"Wenn aktiviert, verwendet die Brückenextrusion eine Linienhöhe, die dem "
+"Düsendurchmesser entspricht.\n"
+"Dies erhöht die Brückenfestigkeit und Zuverlässigkeit, ermöglicht längere Spannweiten, kann aber das Aussehen verschlechtern.\n"
+"Wenn deaktiviert, können Brücken besser aussehen, sind aber im Allgemeinen nur für kürzere Spannweiten zuverlässig."
 
 msgid "Thick internal bridges"
 msgstr "Dicke interne Brücken"
@@ -14211,6 +14351,12 @@ msgid ""
 "If disabled, internal bridges may look better but can be less reliable over "
 "sparse infill."
 msgstr ""
+"Wenn aktiviert, verwendet die interne Brückenextrusion eine Linienhöhe, die "
+"dem Düsendurchmesser entspricht.\n"
+"Dies erhöht die interne Brückenfestigkeit und Zuverlässigkeit, wenn über "
+"seltenes Infill gedruckt wird, kann aber das Aussehen verschlechtern.\n"
+"Wenn deaktiviert, können interne Brücken besser aussehen, sind aber "
+"überdünnes Infill weniger zuverlässig."
 
 msgid "Extra bridge layers (beta)"
 msgstr "Zusätzliche Brückenschichten (Beta)"
@@ -15499,6 +15645,9 @@ msgid ""
 "When enabled, directions rotate with the model to maintain optimal strength "
 "characteristics."
 msgstr ""
+"Richtet die Richtungen von Füllung, Brücke, Glättung und Oberflächenfüllung so "
+"aus, dass sie der Orientierung des Modells auf der Bauplatte folgen.\n"
+"Wenn aktiviert, drehen sich die Richtungen mit dem Modell, um optimale Festigkeitseigenschaften zu erhalten."
 
 msgid "Insert solid layers"
 msgstr "Massive Schichten einfügen"
@@ -15634,25 +15783,28 @@ msgstr ""
 "Wabenstruktur."
 
 msgid "Lightning overhang angle"
-msgstr ""
+msgstr "Überhangwinkel der Blitzfüllung"
 
 msgid "Maximum overhang angle for Lightning infill support propagation."
-msgstr ""
+msgstr "Maximaler Überhangwinkel für die Ausbreitung der Blitzfüllungsunterstützung."
 
 msgid "Prune angle"
-msgstr ""
+msgstr "Beschneidungswinkel"
 
 msgid ""
 "Controls how aggressively short or unsupported Lightning branches are "
 "pruned.\n"
 "This angle is converted internally to a per-layer distance."
 msgstr ""
+"Steuert, wie aggressiv kurze oder nicht unterstützte Blitzäste beschnitten "
+"werden.\n"
+"Dieser Winkel wird intern in eine pro-Schicht-Distanz umgewandelt."
 
 msgid "Straightening angle"
-msgstr ""
+msgstr "Begradigungswinkel"
 
 msgid "Maximum straightening angle used to simplify Lightning branches."
-msgstr ""
+msgstr "Maximaler Begradigungswinkel zur Vereinfachung von Blitzästen."
 
 msgid "Sparse infill anchor length"
 msgstr "Länge des Infill-Ankers"
@@ -16761,6 +16913,8 @@ msgid ""
 "Filament to print internal sparse infill.\n"
 "\"Default\" uses the active object/part filament."
 msgstr ""
+"Filament zum Drucken der internen spärlichen Füllung.\n"
+"\"Standard\" verwendet das Filament des aktiven Objekts/Teils."
 
 msgid ""
 "Line width of internal sparse infill. If expressed as a %, it will be "
@@ -17649,20 +17803,24 @@ msgstr ""
 "100%% Überhang wird die Brückengeschwindigkeit verwendet."
 
 msgid "Outer walls"
-msgstr ""
+msgstr "Äußere Wände"
 
 msgid ""
 "Filament to print outer walls.\n"
 "\"Default\" uses the active object/part filament."
 msgstr ""
+"Filament zum Drucken der äußeren Wände.\n"
+"\"Standard\" verwendet das Filament des aktiven Objekts/Teils."
 
 msgid "Inner walls"
-msgstr ""
+msgstr "Innere Wände"
 
 msgid ""
 "Filament to print inner walls.\n"
 "\"Default\" uses the active object/part filament."
 msgstr ""
+"Filament zum Drucken der inneren Wände.\n"
+"\"Standard\" verwendet das Filament des aktiven Objekts/Teils."
 
 msgid ""
 "Line width of inner wall. If expressed as a %, it will be computed over the "
@@ -18382,16 +18540,22 @@ msgid ""
 "Filament to print internal solid infill.\n"
 "\"Default\" uses the active object/part filament."
 msgstr ""
+"Filament zum Drucken der internen massiven Füllung.\n"
+"\"Standard\" verwendet das Filament des aktiven Objekts/Teils."
 
 msgid ""
 "Filament to print top surface.\n"
 "\"Default\" uses the active object/part filament."
 msgstr ""
+"Filament zum Drucken der oberen Oberfläche.\n"
+"\"Standard\" verwendet das Filament des aktiven Objekts/Teils."
 
 msgid ""
 "Filament to print bottom surface.\n"
 "\"Default\" uses the active object/part filament."
 msgstr ""
+"Filament zum Drucken der unteren Oberfläche.\n"
+"\"Standard\" verwendet das Filament des aktiven Objekts/Teils."
 
 msgid ""
 "Line width of internal solid infill. If expressed as a %, it will be "
@@ -18795,6 +18959,9 @@ msgid ""
 "\"Default\" means no specific filament for support and current filament is "
 "used."
 msgstr ""
+"Filament zum Drucken der Stützstruktur-Basis und des Rafts.\n"
+"\"Standard\" bedeutet kein spezifisches Filament für die Stützstruktur und das "
+"aktuelle Filament wird verwendet."
 
 msgid "Avoid interface filament for base"
 msgstr "Schnittstellenfilament für die Basis verringern"
@@ -18828,6 +18995,9 @@ msgid ""
 "\"Default\" means no specific filament for support interface and current "
 "filament is used."
 msgstr ""
+"Filament zum Drucken der Stützstruktur-Schnittstelle.\n"
+"\"Standard\" bedeutet kein spezifisches Filament für die Stützstruktur-"
+"Schnittstelle und das aktuelle Filament wird verwendet."
 
 msgid "Top interface layers"
 msgstr "Obere Schnittstellenschichten"
@@ -19943,7 +20113,7 @@ msgid "Invalid value when spiral vase mode is enabled: "
 msgstr "Ungültiger Wert, wenn der Spiral-Vase-Modus aktiviert ist: "
 
 msgid "Bridge line width must not exceed nozzle diameter: "
-msgstr ""
+msgstr "Die Brückenlinienbreite darf den Düsendurchmesser nicht überschreiten: "
 
 msgid "too large line width "
 msgstr "Zu große Linienbreite"
@@ -20210,10 +20380,10 @@ msgstr ""
 "3:info, 4:debug, 5:trace\n"
 
 msgid "Log file"
-msgstr ""
+msgstr "Protokolldatei"
 
 msgid "Redirects debug logging to file.\n"
-msgstr ""
+msgstr "Leitet die Fehlerprotokollierung in eine Datei um.\n"
 
 msgid "Enable timelapse for print"
 msgstr "Zeitraffer für Druck aktivieren"
@@ -21764,13 +21934,13 @@ msgid "Top Surface Pattern"
 msgstr "Oberflächenmuster"
 
 msgid "Choose a slot for the selected color"
-msgstr ""
+msgstr "Wählen Sie einen Slot für die ausgewählte Farbe"
 
 msgid "Material in the material station"
-msgstr ""
+msgstr "Material in der Materialstation"
 
 msgid "Only materials of the same type can be selected."
-msgstr ""
+msgstr "Es können nur Materialien desselben Typs ausgewählt werden."
 
 msgid "Send G-code to printer host"
 msgstr "Senden Sie G-Code an den Drucker-Host"
@@ -21798,46 +21968,50 @@ msgid "Upload"
 msgstr "Hochladen"
 
 msgid "Leveling before print"
-msgstr ""
+msgstr "Nivellierung vor dem Druck"
 
 msgid "Time-lapse"
 msgstr "Zeitraffer"
 
 msgid "Enable IFS"
-msgstr ""
+msgstr "IFS aktivieren"
 
 #, c-format, boost-format
 msgid "Detected %d IFS slots on printer."
-msgstr ""
+msgstr "%d IFS-Slots auf dem Drucker erkannt."
 
 msgid "This printer does not report a material station."
-msgstr ""
+msgstr "Dieser Drucker meldet keine Materialstation."
 
 msgid "Unable to read IFS slots from printer."
-msgstr ""
+msgstr "Kann IFS-Slots vom Drucker nicht lesen."
 
 msgid "Loading IFS slots from printer..."
-msgstr ""
+msgstr "Lade IFS-Slots vom Drucker..."
 
 msgid "Slice the plate first to get project material information."
-msgstr ""
+msgstr "Schneiden Sie die Platte zuerst, um Projektmaterialinformationen zu erhalten."
 
 msgid ""
 "This plate uses multiple materials. Enable IFS and assign each tool to a "
 "printer slot."
 msgstr ""
+"Diese Platte verwendet mehrere Materialien. Aktivieren Sie IFS und weisen Sie jedem Werkzeug einen Drucker-Slot zu."
+
 
 msgid "Each project material must be assigned to an IFS slot before printing."
-msgstr ""
+msgstr "Jedes Projektmaterial muss vor dem Drucken einem IFS-Slot zugewiesen werden."
 
 msgid ""
 "Each project material must be assigned to a loaded IFS slot before printing."
 msgstr ""
+"Jedes Projektmaterial muss vor dem Drucken einem geladenen IFS-Slot zugewiesen werden."
 
 msgid ""
 "Each project material must match the material loaded in the selected IFS "
 "slot."
 msgstr ""
+"Jedes Projektmaterial muss mit dem in dem ausgewählten IFS-Slot geladenen Material übereinstimmen."
 
 msgid "Print host upload queue"
 msgstr "Druck-Host-Upload-Warteschlange"
@@ -21894,13 +22068,13 @@ msgstr "Glatte Bauplatte (Seite B)"
 
 #, c-format, boost-format
 msgid "Printer: %s"
-msgstr ""
+msgstr "Drucker: %s"
 
 msgid "Calibrate before printing"
-msgstr ""
+msgstr "Vor dem Drucken kalibrieren"
 
 msgid "Filament Mapping:"
-msgstr ""
+msgstr "Filamentzuordnung:"
 
 msgid "Unable to perform boolean operation on selected parts"
 msgstr ""
@@ -22628,16 +22802,16 @@ msgstr ""
 "Druckerkommunikation. Verfügbare Agenten werden beim Start registriert."
 
 msgid "Select a Flashforge printer"
-msgstr ""
+msgstr "Wählen Sie einen Flashforge-Drucker aus"
 
 msgid "Discovered Printers"
-msgstr ""
+msgstr "Gefundene Drucker"
 
 msgid "Could not get a valid Printer Host reference"
 msgstr "Konnte keine gültige Referenz zum Druck-Host erhalten"
 
 msgid "Valid session not detected. Proceed with login to 3DPrinterOS?"
-msgstr ""
+msgstr "Keine gültige Sitzung erkannt. Mit dem Login bei 3DPrinterOS fortfahren?"
 
 msgid "Success!"
 msgstr "Erfolgreich!"
@@ -22688,28 +22862,28 @@ msgstr ""
 "fehlgeschlagen."
 
 msgid "3DPrinterOS Cloud upload options"
-msgstr ""
+msgstr "3DPrinterOS Cloud-Upload-Optionen"
 
 msgid "Single file"
-msgstr ""
+msgstr "Einzelne Datei"
 
 msgid "Project File"
-msgstr ""
+msgstr "Projektdatei"
 
 msgid "Project:"
-msgstr ""
+msgstr "Projekt:"
 
 msgid "Printer type:"
-msgstr ""
+msgstr "Druckertyp:"
 
 msgid "Printer type not found, please select manually."
-msgstr ""
+msgstr "Druckertyp nicht gefunden, bitte manuell auswählen."
 
 msgid "Authorizing..."
-msgstr ""
+msgstr "Autorisierung..."
 
 msgid "Error session check"
-msgstr ""
+msgstr "Fehler bei der Sitzungsüberprüfung"
 
 #, c-format, boost-format
 msgid "Mismatched type of print host: %s"
@@ -23508,19 +23682,19 @@ msgstr ""
 "es einzurichten."
 
 msgid "Flashforge returned an invalid JSON response."
-msgstr ""
+msgstr "Flashforge hat eine ungültige JSON-Antwort zurückgegeben."
 
 msgid "No Flashforge printers were discovered on the local network."
-msgstr ""
+msgstr "Es wurden keine Flashforge-Drucker im lokalen Netzwerk gefunden."
 
 msgid "Connected to Flashforge local API successfully."
-msgstr ""
+msgstr "Erfolgreich mit der lokalen Flashforge-API verbunden."
 
 msgid "Serial connection to Flashforge is working correctly."
 msgstr "Die serielle Verbindung zu Flashforge funktioniert korrekt."
 
 msgid "Could not connect to Flashforge local API"
-msgstr ""
+msgstr "Konnte keine Verbindung zur lokalen Flashforge-API herstellen."
 
 msgid "Could not connect to Flashforge via serial"
 msgstr ""
@@ -23529,6 +23703,8 @@ msgstr ""
 
 msgid "Flashforge local API requires both serial number and access code."
 msgstr ""
+"Die lokale Flashforge-API erfordert sowohl die Seriennummer als auch den "
+"Zugriffscode."
 
 msgid "The provided state is not correct."
 msgstr "Der bereitgestellte Status ist nicht korrekt."

resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json

@@ -124,7 +124,7 @@
 	"default_filament_profile": [
 		"Creality HF Generic PLA"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"scan_first_layer": "0",
 	"thumbnails": [

resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json

@@ -124,7 +124,7 @@
 	"default_filament_profile": [
 		"Creality HF Generic PLA"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"scan_first_layer": "0",
 	"thumbnails": [

resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json

@@ -124,7 +124,7 @@
 	"default_filament_profile": [
 		"Creality HF Generic PLA"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"scan_first_layer": "0",
 	"thumbnails": [

resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json

@@ -54,7 +54,7 @@
 	"machine_pause_gcode": "PAUSE",
 	"machine_platform_motion_enable": "1",
 	"machine_ptc_exist": "1",
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_hrc": "0",

resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json

@@ -123,7 +123,7 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K1-all"
 	],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"scan_first_layer": "0",
 	"thumbnails_format": "PNG",

resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json

@@ -53,7 +53,7 @@
 	"machine_min_travel_rate": "0,0",
 	"machine_pause_gcode": "PAUSE",
 	"machine_platform_motion_enable": "1",
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_hrc": "0",

resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json

@@ -54,7 +54,7 @@
 	"machine_pause_gcode": "PAUSE",
 	"machine_platform_motion_enable": "1",
 	"machine_ptc_exist": "1",
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_hrc": "0",

resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json

@@ -54,7 +54,7 @@
 	"machine_pause_gcode": "PAUSE",
 	"machine_platform_motion_enable": "1",
 	"machine_ptc_exist": "1",
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_hrc": "0",

resources/profiles/Creality/machine/Creality K2 0.2 nozzle.json

@@ -88,7 +88,8 @@
 		"5"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y130 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y130 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X130 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_type": "hardened_steel",

resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json

@@ -86,8 +86,8 @@
 		"5"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
-	"machine_unload_filament_time": "0",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"manual_filament_change": "0",
 	"nozzle_type": "hardened_steel",
 	"nozzle_volume": "183",

resources/profiles/Creality/machine/Creality K2 0.6 nozzle.json

@@ -86,7 +86,8 @@
 		"5"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_type": "hardened_steel",

resources/profiles/Creality/machine/Creality K2 0.8 nozzle.json

@@ -86,7 +86,8 @@
 		"5"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_type": "hardened_steel",

resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json

@@ -138,7 +138,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json

@@ -138,7 +138,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json

@@ -138,7 +138,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json

@@ -138,7 +138,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Pro 0.2 nozzle.json

@@ -138,8 +138,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\n\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
-	"machine_end_gcode": "END_PRINT",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",

resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json

@@ -136,7 +136,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json

@@ -136,7 +136,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json

@@ -136,7 +136,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json

@@ -53,7 +53,8 @@
 	"machine_min_travel_rate": "0,0",
 	"machine_pause_gcode": "PAUSE",
 	"machine_platform_motion_enable": "1",
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_hrc": "0",

resources/profiles/Elegoo.json

@@ -1,6 +1,6 @@
 {
 	"name": "Elegoo",
-	"version": "02.04.00.02",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Elegoo configurations",
 	"machine_model_list": [

resources/profiles/Elegoo/machine/EC/Elegoo Centauri 0.4 nozzle.json

@@ -62,7 +62,7 @@
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M600",
 	"support_multi_filament": "0",
-	"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
-	"machine_start_gcode": ";;===== date: 20251011 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\n;bed_level_temp:[bed_temperature_initial_layer_single]\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM190 S[bed_temperature_initial_layer_single]\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
+	"layer_change_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER={layer_num+1}",
+	"machine_start_gcode": ";;===== date: 20251011 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\n;bed_level_temp:[bed_temperature_initial_layer_single]\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM190 S[bed_temperature_initial_layer_single]\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER=0\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
 	"machine_end_gcode": ";===== date: 20250603 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800\nG2 I1 J0 Z{max_layer_z+0.5} F3000 ; lower z a little\nG90\n{if max_layer_z > 100}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
 }

resources/profiles/Elegoo/machine/ECC/Elegoo Centauri Carbon 0.4 nozzle.json

@@ -66,7 +66,7 @@
 	"change_filament_gcode": "\n;==========CC_CHANGE_FILAMENT_GCODE_CCB==========\n;===== date: 2025-12-04-001 =====================\nM106 S0\nM106 P2 S0\nG1 Z{min(max_layer_z+3, printable_height+0.5)} F1200\nM6211 T[next_extruder] L[flush_length] M{old_filament_e_feedrate} N{new_filament_e_feedrate} Q[old_filament_temp] R[nozzle_temperature_range_high] S[new_filament_temp]\nT[next_extruder]\n;==========CC_CHANGE_FILAMENT_GCODE_CCE==========",
 	"machine_pause_gcode": "M600",
 	"support_multi_filament": "1",
-	"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
-	"machine_start_gcode": ";===== CC_START_GCODE ================\n;===== date: 2026-04-28-001 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\n;bed_level_temp:[bed_temperature_initial_layer_single]\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nM83\nG28 ;home\nM729 ;Clean Nozzle\nM190 S[bed_temperature_initial_layer_single]\n\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\n\n\nG90\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X0 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X0.9 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
+	"layer_change_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER={layer_num+1}",
+	"machine_start_gcode": ";===== CC_START_GCODE ================\n;===== date: 2026-04-28-001 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\n;bed_level_temp:[bed_temperature_initial_layer_single]\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nM83\nG28 ;home\nM729 ;Clean Nozzle\nM190 S[bed_temperature_initial_layer_single]\n\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\n\n\nG90\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X0 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X0.9 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER=0\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
 	"machine_end_gcode": ";===== CC_END_GCODE ================\n;===== date: 2025-12-04-001 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800\nG2 I1 J0 Z{max_layer_z+0.5} F3000 ; lower z a little\nG90\n{if max_layer_z > 100}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM749\nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
 }

resources/profiles/Elegoo/machine/ECC2/Elegoo Centauri Carbon 2 0.4 nozzle.json

@@ -86,9 +86,9 @@
 		"9"
 	],
 	"change_filament_gcode": "\n;==========CC2_CHANGE_FILAMENT_GCODE==========\n;===== date: 2026-01-16-001 =====================\nM106 S0\nM106 P2 S0\nG1 Z{min(max_layer_z+3, printable_height+0.5)} F1200\nM6211 T[next_extruder] L[flush_length] M{old_filament_e_feedrate} N{new_filament_e_feedrate} Q[old_filament_temp] R[nozzle_temperature_range_high] S[new_filament_temp]\nT[next_extruder]\n",
-	"layer_change_gcode": "M73 L{layer_num+1}\n;LAYER:{layer_num+1}\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
+	"layer_change_gcode": "M73 L{layer_num+1}\n;LAYER:{layer_num+1}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER={layer_num+1}",
 	"machine_end_gcode": ";===== CC2_END_GCODE ================\n;===== date: 2026-01-16-001 =====================\n\n\nM140 S0 ;Turn-off bed\nM83\nG92 E0 ; zero the extruder\nG1 E-1.5 F1800\nG2 I0 J1 Z{max_layer_z+0.5} F3000 ; lower z a little\nM106 S0\nM106 P2 S0\nG90\n{if max_layer_z > 75}G1 Z{min(max_layer_z+5, printable_height+0.5)} F20000{else}G1 Z80 F20000 {endif}; Move print head up \nG180 S9\nM104 S0\nM84\n",
-	"machine_start_gcode": ";===== CC2_START_GCODE ================\n;===== date: 2026-01-16-001 =====================\n\nG90\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single] A\nM106 S0\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 FROM_SLICER=1\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\nG28\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n{if first_layer_print_min[1] > 0.5}\nG180 S7\nG1 X{print_bed_max[0]*0.5-1} Y-1.2 F20000\nG1 Z0.5 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 E6 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nM106 S200\nG1 X{print_bed_max[0]*0.5-41} E20 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nG1 F6000\nG1 X{print_bed_max[0]*0.5-46} E0.8\n{else}\nG1 E30 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))}\n{endif}\nM106 S0\nG180 S8\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
+	"machine_start_gcode": ";===== CC2_START_GCODE ================\n;===== date: 2026-01-16-001 =====================\n\nG90\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single] A\nM106 S0\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 FROM_SLICER=1\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\nG28\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n{if first_layer_print_min[1] > 0.5}\nG180 S7\nG1 X{print_bed_max[0]*0.5-1} Y-1.2 F20000\nG1 Z0.5 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 E6 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nM106 S200\nG1 X{print_bed_max[0]*0.5-41} E20 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nG1 F6000\nG1 X{print_bed_max[0]*0.5-46} E0.8\n{else}\nG1 E30 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))}\n{endif}\nM106 S0\nG180 S8\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER=0\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
 	"retract_restart_extra_toolchange": [
 		"0.5"
 	]

resources/profiles/Elegoo/process/EOSGIGA/0.16mm Optimal @Elegoo Giga 0.4 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
 	"layer_height": "0.16",
 	"instantiation": "true",
+	"renamed_from": "0.16mm Optimal @EOS Giga 0.4 nozzle",
 	"name": "0.16mm Optimal @Elegoo Giga 0.4 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.18mm Fine @Elegoo Giga 0.6 nozzle.json

@@ -2,6 +2,7 @@
 	"inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
 	"layer_height": "0.18",
 	"instantiation": "true",
+	"renamed_from": "0.18mm Fine @EOS Giga 0.6 nozzle",
 	"name": "0.18mm Fine @Elegoo Giga 0.6 nozzle",
 	"compatible_printers": [
 		"Elegoo OrangeStorm Giga 0.6 nozzle"

resources/profiles/Elegoo/process/EOSGIGA/0.20mm Standard @Elegoo Giga 0.4 nozzle.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "PEOSG04020",
 	"instantiation": "true",
+	"renamed_from": "0.20mm Standard @EOS Giga 0.4 nozzle",
 	"default_acceleration": "3000",
 	"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode",
 	"initial_layer_print_height": "0.25",

resources/profiles/Elegoo/process/EOSGIGA/0.20mm Strength @Elegoo Giga 0.4 nozzle.json

@@ -4,5 +4,6 @@
 	"wall_sequence": "inner-outer-inner wall",
 	"reduce_crossing_wall": "1",
 	"instantiation": "true",
+	"renamed_from": "0.20mm Strength @EOS Giga 0.4 nozzle",
 	"wall_loops": "6"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.24mm Draft @Elegoo Giga 0.4 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
 	"layer_height": "0.24",
 	"instantiation": "true",
+	"renamed_from": "0.24mm Draft @EOS Giga 0.4 nozzle",
 	"name": "0.24mm Draft @Elegoo Giga 0.4 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.24mm Fine @Elegoo Giga 0.8 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
 	"layer_height": "0.24",
 	"instantiation": "true",
+	"renamed_from": "0.24mm Fine @EOS Giga 0.8 nozzle",
 	"name": "0.24mm Fine @Elegoo Giga 0.8 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.24mm Optimal @Elegoo Giga 0.6 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
 	"layer_height": "0.24",
 	"instantiation": "true",
+	"renamed_from": "0.24mm Optimal @EOS Giga 0.6 nozzle",
 	"name": "0.24mm Optimal @Elegoo Giga 0.6 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.28mm Extra Draft @Elegoo Giga 0.4 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
 	"layer_height": "0.28",
 	"instantiation": "true",
+	"renamed_from": "0.28mm Extra Draft @EOS Giga 0.4 nozzle",
 	"name": "0.28mm Extra Draft @Elegoo Giga 0.4 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.30mm Fine @Elegoo Giga 1.0 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
 	"layer_height": "0.3",
 	"instantiation": "true",
+	"renamed_from": "0.30mm Fine @EOS Giga 1.0 nozzle",
 	"name": "0.30mm Fine @Elegoo Giga 1.0 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.30mm Standard @Elegoo Giga 0.6 nozzle.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "PEOSG06030",
 	"instantiation": "true",
+	"renamed_from": "0.30mm Standard @EOS Giga 0.6 nozzle",
 	"default_acceleration": "3000",
 	"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode",
 	"initial_layer_acceleration": "1000",

resources/profiles/Elegoo/process/EOSGIGA/0.30mm Strength @Elegoo Giga 0.6 nozzle.json

@@ -4,5 +4,6 @@
 	"wall_sequence": "inner-outer-inner wall",
 	"reduce_crossing_wall": "1",
 	"instantiation": "true",
+	"renamed_from": "0.30mm Strength @EOS Giga 0.6 nozzle",
 	"wall_loops": "5"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.32mm Optimal @Elegoo Giga 0.8 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
 	"layer_height": "0.32",
 	"instantiation": "true",
+	"renamed_from": "0.32mm Optimal @EOS Giga 0.8 nozzle",
 	"name": "0.32mm Optimal @Elegoo Giga 0.8 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.36mm Draft @Elegoo Giga 0.6 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
 	"layer_height": "0.36",
 	"instantiation": "true",
+	"renamed_from": "0.36mm Draft @EOS Giga 0.6 nozzle",
 	"name": "0.36mm Draft @Elegoo Giga 0.6 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.40mm Optimal @Elegoo Giga 1.0 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
 	"layer_height": "0.4",
 	"instantiation": "true",
+	"renamed_from": "0.40mm Optimal @EOS Giga 1.0 nozzle",
 	"name": "0.40mm Optimal @Elegoo Giga 1.0 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.40mm Standard @Elegoo Giga 0.8 nozzle.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "PEOSG08040",
 	"instantiation": "true",
+	"renamed_from": "0.40mm Standard @EOS Giga 0.8 nozzle",
 	"default_acceleration": "3000",
 	"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode",
 	"initial_layer_acceleration": "1000",

resources/profiles/Elegoo/process/EOSGIGA/0.42mm Extra Draft @Elegoo Giga 0.6 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
 	"layer_height": "0.42",
 	"instantiation": "true",
+	"renamed_from": "0.42mm Extra Draft @EOS Giga 0.6 nozzle",
 	"name": "0.42mm Extra Draft @Elegoo Giga 0.6 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.48mm Draft @Elegoo Giga 0.8 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
 	"layer_height": "0.48",
 	"instantiation": "true",
+	"renamed_from": "0.48mm Draft @EOS Giga 0.8 nozzle",
 	"name": "0.48mm Draft @Elegoo Giga 0.8 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.50mm Standard @Elegoo Giga 1.0 nozzle.json

@@ -4,6 +4,7 @@
 	"from": "system",
 	"setting_id": "PEOSG10050",
 	"instantiation": "true",
+	"renamed_from": "0.50mm Standard @EOS Giga 1.0 nozzle",
 	"default_acceleration": "3000",
 	"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode",
 	"initial_layer_acceleration": "1000",

resources/profiles/Elegoo/process/EOSGIGA/0.56mm Extra Draft @Elegoo Giga 0.8 nozzle.json

@@ -1,5 +1,6 @@
 {
 	"inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
 	"instantiation": "true",
+	"renamed_from": "0.56mm Extra Draft @EOS Giga 0.8 nozzle",
 	"name": "0.56mm Extra Draft @Elegoo Giga 0.8 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.60mm Draft @Elegoo Giga 1.0 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
 	"layer_height": "0.6",
 	"instantiation": "true",
+	"renamed_from": "0.60mm Draft @EOS Giga 1.0 nozzle",
 	"name": "0.60mm Draft @Elegoo Giga 1.0 nozzle"
 }

resources/profiles/OrcaFilamentLibrary.json

@@ -1,6 +1,6 @@
 {
 	"name": "OrcaFilamentLibrary",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Orca Filament Library",
 	"filament_list": [

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ABS @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEABSS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo ABS",
 	"fan_max_speed": [
 		"40"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ASA-CF @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEASACFS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo ASA-CF",
 	"pressure_advance": [
 		"0.04"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT-CF @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPAHTCFS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PAHT-CF",
 	"close_fan_the_first_x_layers": [
 		"3"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPCS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PC",
 	"pressure_advance": [
 		"0.052"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC-FR @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPCFRS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PC-FR",
 	"pressure_advance": [
 		"0.05"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PET-CF @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPETCFS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PET-CF",
 	"pressure_advance": [
 		"0.05"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPETGS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PETG",
 	"pressure_advance": [
 		"0.05"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG HF @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OERPETGHFS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PETG HF",
 	"pressure_advance": [
 		"0.052"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG Translucent @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPETGTRANSS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PETG Translucent",
 	"pressure_advance": [
 		"0.052"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-CF @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPETGCFS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PETG-CF",
 	"pressure_advance": [
 		"0.052"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-GF @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPETGFS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PETG-GF",
 	"pressure_advance": [
 		"0.052"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Basic @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPLABASICS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PLA Basic",
 	"nozzle_temperature": [
 		"220"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Galaxy @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPLAGALAXYS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PLA Galaxy",
 	"fan_min_speed": [
 		"80"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Glow @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPLAGLOWS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PLA Glow",
 	"pressure_advance": [
 		"0.04"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Marble @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPLAMARBLES00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PLA Marble",
 	"fan_min_speed": [
 		"80"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Sparkle @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPLASPARKLES00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PLA Sparkle",
 	"fan_min_speed": [
 		"80"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Translucent2 @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPLATRA2S00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PLA Translucent2",
 	"pressure_advance": [
 		"0.04"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Wood @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OEPLAWOODS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo PLA Wood",
 	"fan_min_speed": [
 		"80"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid TPU 95A @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OERTPU95AS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo Rapid TPU 95A",
 	"pressure_advance": [
 		"0.1"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo TPU 95A @System.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "OETPU95AS00",
 	"instantiation": "true",
+	"renamed_from": "Elegoo TPU 95A",
 	"filament_max_volumetric_speed": [
 		"3.2"
 	],

resources/profiles/Qidi.json

@@ -1,6 +1,6 @@
 {
 	"name": "Qidi",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Qidi configurations",
 	"machine_model_list": [

resources/profiles/Qidi/machine/Qidi Q2 0.4 nozzle.json

@@ -48,7 +48,7 @@
 		"20"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "INIT_MAPPING_VALUE\nPRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG1 X108.000 Y1 F30000\nG0 Z[initial_layer_print_height] F600\n;G1 E3 F1800\nG90\nM83\nG0 X128 E8  F{outer_wall_volumetric_speed/(24/20)    * 60}\nG0 X133 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X138 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X143 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X148 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X153 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 X108.000 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nM83\nG0 X128 E10  F{outer_wall_volumetric_speed/(24/20)    * 60}\nG0 X133 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X138 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X143 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X148 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X153 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 Z1 F600",
+	"machine_start_gcode": "INIT_MAPPING_VALUE\nPRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nT[initial_tool]\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nG1 X108 Y1 F30000\nG0 Z[initial_layer_print_height] F600\nG0 X128 E8 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4  * 60}\nG1 X154 Z-0.1\nG1 X158\nG1 Z1 F600\nG1 X108 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nG0 X128 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X154 Z-0.1\nG1 X158\nG1 Z1 F600",
 	"machine_unload_filament_time": "35",
 	"nozzle_diameter": [
 		"0.4"

scripts/msix/AppxManifest.xml

@@ -0,0 +1,75 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Package
+  xmlns="http://schemas.microsoft.com/appx/manifest/foundation/windows10"
+  xmlns:uap="http://schemas.microsoft.com/appx/manifest/uap/windows10"
+  xmlns:rescap="http://schemas.microsoft.com/appx/manifest/foundation/windows10/restrictedcapabilities"
+  xmlns:rescap3="http://schemas.microsoft.com/appx/manifest/foundation/windows10/restrictedcapabilities/3"
+  xmlns:desktop6="http://schemas.microsoft.com/appx/manifest/desktop/windows10/6"
+  xmlns:virtualization="http://schemas.microsoft.com/appx/manifest/virtualization/windows10"
+  IgnorableNamespaces="uap rescap rescap3 desktop6 virtualization">
+
+  <Identity Name="@MSIX_IDENTITY_NAME@"
+            Publisher="@MSIX_PUBLISHER@"
+            Version="@MSIX_VERSION@"
+            ProcessorArchitecture="x64" />
+
+  <Properties>
+    <DisplayName>OrcaSlicer</DisplayName>
+    <PublisherDisplayName>@MSIX_PUBLISHER_DISPLAY_NAME@</PublisherDisplayName>
+    <Logo>Assets\StoreLogo.png</Logo>
+    <!-- Keep config in the real %APPDATA%\OrcaSlicer so it survives uninstall and
+         is shared with the classic (NSIS/portable) install.
+         Win10 1903+: coarse switch disables AppData write virtualization entirely.
+         Win11+: fine-grained exclusion below takes precedence over the coarse switch. -->
+    <desktop6:FileSystemWriteVirtualization>disabled</desktop6:FileSystemWriteVirtualization>
+    <virtualization:FileSystemWriteVirtualization>
+      <virtualization:ExcludedDirectories>
+        <virtualization:ExcludedDirectory>$(KnownFolder:RoamingAppData)\OrcaSlicer</virtualization:ExcludedDirectory>
+      </virtualization:ExcludedDirectories>
+    </virtualization:FileSystemWriteVirtualization>
+  </Properties>
+
+  <Dependencies>
+    <TargetDeviceFamily Name="Windows.Desktop" MinVersion="10.0.18362.0" MaxVersionTested="10.0.26100.0" />
+  </Dependencies>
+
+  <Resources>
+    <Resource Language="en-us" />
+  </Resources>
+
+  <Applications>
+    <Application Id="OrcaSlicer" Executable="orca-slicer.exe" EntryPoint="Windows.FullTrustApplication">
+      <uap:VisualElements
+        DisplayName="OrcaSlicer"
+        Description="Open-source slicer for FDM 3D printers"
+        BackgroundColor="transparent"
+        Square150x150Logo="Assets\Square150x150Logo.png"
+        Square44x44Logo="Assets\Square44x44Logo.png" />
+      <Extensions>
+        <uap:Extension Category="windows.fileTypeAssociation">
+          <uap:FileTypeAssociation Name="orcaslicer-models">
+            <uap:SupportedFileTypes>
+              <uap:FileType>.3mf</uap:FileType>
+              <uap:FileType>.stl</uap:FileType>
+              <uap:FileType>.step</uap:FileType>
+              <uap:FileType>.stp</uap:FileType>
+              <uap:FileType>.gcode</uap:FileType>
+              <uap:FileType>.drc</uap:FileType>
+            </uap:SupportedFileTypes>
+            <rescap3:MigrationProgIds>
+              <rescap3:MigrationProgId>Orca.Slicer.1</rescap3:MigrationProgId>
+            </rescap3:MigrationProgIds>
+          </uap:FileTypeAssociation>
+        </uap:Extension>
+        <uap:Extension Category="windows.protocol">
+          <uap:Protocol Name="orcaslicer" />
+        </uap:Extension>
+      </Extensions>
+    </Application>
+  </Applications>
+
+  <Capabilities>
+    <rescap:Capability Name="runFullTrust" />
+    <rescap:Capability Name="unvirtualizedResources" />
+  </Capabilities>
+</Package>

scripts/msix/build_msix.ps1

@@ -0,0 +1,67 @@
+<#
+Builds the unsigned MSIX Store package from an existing install tree.
+The package is intentionally NOT signed: the Microsoft Store strips and
+re-signs uploads with Microsoft's certificate. For local installs use
+Developer Mode loose-layout registration instead:
+  ./scripts/msix/build_msix.ps1 -StageOnly
+  Add-AppxPackage -Register <staging>\AppxManifest.xml
+Requires the Windows SDK (makeappx.exe) unless -StageOnly is used.
+#>
+param(
+    [string]$InstallDir = "build/OrcaSlicer",
+    [string]$OutputPath = "build/OrcaSlicer_Windows_MSIX.msix",
+    [string]$StagingDir = "",
+    [switch]$StageOnly,
+    [string]$IdentityName = "OrcaSlicer.OrcaSlicer",
+    [string]$Publisher = "CN=38F7EA55-C73B-4072-B3B2-C8E0EA15BB82",
+    [string]$PublisherDisplayName = "OrcaSlicer"
+)
+$ErrorActionPreference = 'Stop'
+
+$repoRoot = Split-Path (Split-Path $PSScriptRoot -Parent) -Parent
+
+# MSIX version = MAJOR.MINOR.PATCH.0 from the SoftFever_VERSION semver triplet
+# (Store requires the revision field to be 0).
+$versionContent = Get-Content (Join-Path $repoRoot 'version.inc') -Raw
+if ($versionContent -notmatch 'set\(SoftFever_VERSION "(\d+)\.(\d+)\.(\d+)') {
+    throw "Could not parse SoftFever_VERSION from version.inc"
+}
+$msixVersion = "$($Matches[1]).$($Matches[2]).$($Matches[3]).0"
+Write-Output "MSIX version: $msixVersion"
+
+if (-not (Test-Path (Join-Path $InstallDir 'orca-slicer.exe'))) {
+    throw "orca-slicer.exe not found in '$InstallDir' - build the install tree first"
+}
+
+if ([string]::IsNullOrEmpty($StagingDir)) {
+    $StagingDir = Join-Path ([System.IO.Path]::GetTempPath()) 'orca-msix-staging'
+}
+if (Test-Path $StagingDir) { Remove-Item $StagingDir -Recurse -Force }
+New-Item -ItemType Directory -Force $StagingDir | Out-Null
+
+Copy-Item -Path (Join-Path $InstallDir '*') -Destination $StagingDir -Recurse
+Copy-Item -Path (Join-Path $PSScriptRoot 'assets') -Destination (Join-Path $StagingDir 'Assets') -Recurse
+
+$manifest = Get-Content (Join-Path $PSScriptRoot 'AppxManifest.xml') -Raw
+$manifest = $manifest.Replace('@MSIX_VERSION@', $msixVersion)
+$manifest = $manifest.Replace('@MSIX_IDENTITY_NAME@', $IdentityName)
+$manifest = $manifest.Replace('@MSIX_PUBLISHER@', $Publisher)
+$manifest = $manifest.Replace('@MSIX_PUBLISHER_DISPLAY_NAME@', $PublisherDisplayName)
+Set-Content -Path (Join-Path $StagingDir 'AppxManifest.xml') -Value $manifest -Encoding utf8
+
+if ($StageOnly) {
+    Write-Output "Staged loose layout at: $StagingDir"
+    return
+}
+
+$makeappx = Get-ChildItem "${env:ProgramFiles(x86)}\Windows Kits\10\bin\10.*\x64\makeappx.exe" -ErrorAction SilentlyContinue |
+    Sort-Object { [version]$_.Directory.Parent.Name } -Descending |
+    Select-Object -First 1 -ExpandProperty FullName
+if (-not $makeappx) {
+    throw "makeappx.exe not found under '${env:ProgramFiles(x86)}\Windows Kits\10\bin' - install the Windows SDK"
+}
+Write-Output "Using makeappx: $makeappx"
+
+& $makeappx pack /d $StagingDir /p $OutputPath /o
+if ($LASTEXITCODE -ne 0) { throw "makeappx pack failed with exit code $LASTEXITCODE" }
+Write-Output "Packed: $OutputPath"

scripts/msix/generate_assets.ps1

@@ -0,0 +1,56 @@
+# Generates the MSIX package logo assets from the master vector logo
+# (resources\images\OrcaSlicer_gradient_circle.svg). Each PNG is rendered from
+# the SVG at its exact target size (true per-size vector rasterization, not
+# downscaled from one bitmap), preserving alpha transparency in the corners
+# outside the circle (the manifest uses BackgroundColor="transparent").
+#
+# Run once locally on Windows (re-run only if the logo changes), then commit
+# the PNGs in assets/. CI never runs this script.
+#
+# Prerequisite: Python 3 with the resvg-py package (pip install resvg-py).
+# It bundles the resvg SVG renderer, needed because the master SVG uses
+# gradients with alpha-fade stops that System.Drawing cannot rasterize.
+param(
+    [string]$Python = 'python'
+)
+$ErrorActionPreference = 'Stop'
+
+$repoRoot = Split-Path (Split-Path $PSScriptRoot -Parent) -Parent
+$source   = Join-Path $repoRoot 'resources\images\OrcaSlicer_gradient_circle.svg'
+$outDir   = Join-Path $PSScriptRoot 'assets'
+New-Item -ItemType Directory -Force $outDir | Out-Null
+
+$sizes = [ordered]@{
+    'Square150x150Logo.png'                              = 150
+    'Square44x44Logo.png'                                = 44
+    'Square44x44Logo.targetsize-44_altform-unplated.png' = 44
+    'StoreLogo.png'                                      = 50
+}
+
+$py = @'
+import sys
+from pathlib import Path
+
+import resvg_py
+
+svg, out_dir = sys.argv[1], Path(sys.argv[2])
+for spec in sys.argv[3:]:
+    name, px = spec.rsplit('=', 1)
+    px = int(px)
+    data = resvg_py.svg_to_bytes(svg_path=svg, width=px, height=px)
+    (out_dir / name).write_bytes(bytes(data))
+    print(f'Wrote {name} ({px}x{px})')
+'@
+
+$renderScript = Join-Path $env:TEMP 'orca_msix_render.py'
+Set-Content -Path $renderScript -Value $py -Encoding utf8
+try {
+    $specs = foreach ($name in $sizes.Keys) { "$name=$($sizes[$name])" }
+    & $Python $renderScript $source $outDir @specs
+    if ($LASTEXITCODE -ne 0) {
+        throw 'resvg render failed. Is resvg-py installed? (pip install resvg-py)'
+    }
+}
+finally {
+    Remove-Item $renderScript -ErrorAction SilentlyContinue
+}

src/libslic3r/Preset.cpp

@@ -2362,6 +2362,10 @@ bool PresetCollection::validate_preset(const std::string &preset_name, std::stri
             const std::string canonical_inherit_name = this->canonical_preset_name(inherit_name);
             it    = this->find_preset_internal(canonical_inherit_name);
             found = it != m_presets.end() && it->name == canonical_inherit_name && is_trusted(*it);
+            if (!found) {
+                it    = this->find_preset_renamed(canonical_inherit_name);
+                found = it != m_presets.end() && is_trusted(*it);
+            }
             if (found)
                 BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(": preset_name %1%, inherit_name %2%, found inherit in list")%preset_name %inherit_name;
             else
@@ -2453,7 +2457,9 @@ std::pair<Preset*, bool> PresetCollection::load_external_preset(
 
     if (!inherits.empty() && (different_settings_list.size() > 0)) {
         auto iter = this->find_preset_internal(inherits);
-        if (iter != m_presets.end() && iter->name == inherits) {
+        if (iter == m_presets.end() || iter->name != inherits)
+            iter = this->find_preset_renamed(inherits);
+        if (iter != m_presets.end()) {
             //std::vector<std::string> dirty_options = cfg.diff(iter->config);
             BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(": change preset %1% inherit %2% 's value to %3% 's values")%original_name %inherits %path;
             cfg.update_non_diff_values_to_base_config(iter->config, keys, different_settings_list, extruder_id_name, extruder_variant_name, *key_set1, *key_set2);
@@ -2505,7 +2511,9 @@ std::pair<Preset*, bool> PresetCollection::load_external_preset(
         // and override its settings with the loaded ones.
         assert(it == m_presets.end());
         it    = this->find_preset_internal(inherits);
-        found = it != m_presets.end() && it->name == inherits;
+        if (it == m_presets.end() || it->name != inherits)
+            it = this->find_preset_renamed(inherits);
+        found = it != m_presets.end();
         if (found && profile_print_params_same(it->config, cfg)) {
             // The system preset exists and it matches the values stored inside config.
             if (select == LoadAndSelect::Always)

src/slic3r/GUI/BBLTopbar.cpp

@@ -807,6 +807,8 @@ wxAuiToolBarItem* BBLTopbar::FindToolByCurrentPosition()
 }
 
 #ifdef __WXMSW__
+#include <windowsx.h>
+
 WXLRESULT CenteredTitle::MSWWindowProc(WXUINT nMsg, WXWPARAM wParam, WXLPARAM lParam)
 {
     switch (nMsg) {
@@ -823,6 +825,8 @@ WXLRESULT BBLTopbar::MSWWindowProc(WXUINT nMsg, WXWPARAM wParam, WXLPARAM lParam
 {
     switch (nMsg) {
     case WM_NCHITTEST: {
+        m_last_mouse_position = ScreenToClient({GET_X_LPARAM(lParam), GET_Y_LPARAM(lParam)});
+
         wxAuiToolBarItem* item = this->FindToolByCurrentPosition();
         if (item != NULL && item->GetWindow() != m_title_ctrl) {
             break;

src/slic3r/GUI/GUI_App.cpp

@@ -2859,7 +2859,11 @@ bool GUI_App::on_init_inner()
                     switch (dialog.ShowModal())
                     {
                     case wxID_YES:
-                        wxLaunchDefaultBrowser(version_info.url);
+                        // Store builds get updates from the Microsoft Store, not the GitHub release page.
+                        if (is_running_in_msix())
+                            open_ms_store_product_page();
+                        else
+                            wxLaunchDefaultBrowser(version_info.url);
                         break;
                     case wxID_NO:
                         break;
@@ -4940,6 +4944,7 @@ void GUI_App::on_http_error(wxCommandEvent &evt)
         // Parse the conflict body to extract the error code and server profile id
         int conflict_code = 0;
         std::string conflict_setting_id;
+        std::string conflict_preset_name;
         try {
             json conflict_body = json::parse(body_str);
             if (conflict_body.contains("code"))
@@ -4947,21 +4952,40 @@ void GUI_App::on_http_error(wxCommandEvent &evt)
             if (conflict_body.contains("server_profile") && conflict_body["server_profile"].contains("id")
                 && conflict_body["server_profile"]["id"].is_string())
                 conflict_setting_id = conflict_body["server_profile"]["id"].get<std::string>();
+            // The local preset name is injected into the conflict body by the agent (sync_push),
+            // since the server response itself omits it for tombstone (-3) conflicts.
+            if (conflict_body.contains("name") && conflict_body["name"].is_string())
+                conflict_preset_name = conflict_body["name"].get<std::string>();
         } catch (...) {
             BOOST_LOG_TRIVIAL(warning) << "Failed to parse 409 conflict body.";
         }
+        // Capture the user id up front so the force-push closure does not have to touch m_agent.
+        std::string conflict_user_id = m_agent ? m_agent->get_user_id() : std::string();
         auto* plater = wxGetApp().plater();
         if (plater != nullptr && wxGetApp().imgui()->display_initialized()) {
             std::string text;
-            if (conflict_code == -1) {
+
+            switch (conflict_code) {
+            case -1:
                 text = _u8L("Cloud sync conflict: this preset has a newer version in OrcaCloud.\n"
                             "Pull downloads the cloud copy. Force push overwrites it with your local preset.");
-            } else {
+                break;
+            case -2:
                 text = _u8L("Cloud sync conflict: a preset with this name already exists in OrcaCloud.\n"
                             "Pull downloads the cloud copy. Force push overwrites it with your local preset.");
-            }
+                break;
+            case -3:
+                text = _u8L("Cloud sync conflict: a preset with the same name was previously deleted from the cloud.\n"
+                            "Delete will delete your local preset. Force push overwrites it with your local preset.");
+                break;
+            default:
+                text = _u8L("Cloud sync conflict: there was an unexpected or unidentified preset conflict.\n"
+                            "Pull downloads the cloud copy. Force push overwrites it with your local preset.");
+                break;
+            };
+
             plater->get_notification_manager()->push_orca_sync_conflict_notification(
-                text,
+                text, conflict_code,
                 [this](wxEvtHandler*) {
                     // Runs on the GUI thread (on_http_error is a queued wx event); restart_sync_user_preset()
                     // already joins the old sync thread off the UI thread, so no extra thread is needed here.
@@ -4971,7 +4995,7 @@ void GUI_App::on_http_error(wxCommandEvent &evt)
                     restart_sync_user_preset();
                     return true;
                 },
-                [this, conflict_setting_id](wxEvtHandler*) {
+                [this, conflict_setting_id, conflict_preset_name, conflict_user_id](wxEvtHandler*) {
                     if (mainframe == nullptr)
                         return false;
                     MessageDialog
@@ -4981,7 +5005,13 @@ void GUI_App::on_http_error(wxCommandEvent &evt)
                     if (dlg.ShowModal() != wxID_YES)
                         return false;
 
-                    force_push_conflicting_preset(conflict_setting_id);
+                    std::string setting_id = conflict_setting_id;
+                    if (setting_id.empty()) {
+                        setting_id = OrcaCloudServiceAgent::generate_uuid_for_setting_id(conflict_preset_name, conflict_user_id);
+                        BOOST_LOG_TRIVIAL(info) << "conflict setting id empty, generated one: " << setting_id;
+                    }
+
+                    force_push_conflicting_preset(setting_id);
                     return true;
                 });
         }
@@ -7055,15 +7085,26 @@ void GUI_App::force_push_conflicting_preset(const std::string& setting_id)
         m_pending_conflict_setting_ids.push_back(setting_id);
     }
 
+    const std::string user_id = m_agent ? m_agent->get_user_id() : std::string();
+
     // The 409 left this preset on "hold", which get_user_presets() skips. Restore it to
     // "update" so the next push-sync re-includes it and consumes the queued force flag.
     // (We must NOT pull from the cloud here as the Pull path does — that would overwrite
     // the local changes the user is trying to force-push.)
+    // For a -3 tombstone on a newly created preset the on-disk setting_id is EMPTY (it only
+    // gets assigned after a successful first push), so derive it on the fly from the preset
+    // name and stamp it onto the preset — otherwise sync_with_lock's `id == preset.setting_id`
+    // check never fires and the force-push silently no-ops.
     PresetCollection* collections[] = {&preset_bundle->prints, &preset_bundle->filaments, &preset_bundle->printers};
     for (PresetCollection* coll : collections) {
         for (const Preset& preset : coll->get_presets()) {
-            if (preset.setting_id == setting_id && preset.sync_info == "hold") {
-                coll->set_sync_info_and_save(preset.name, preset.setting_id, "update", 0);
+            if (preset.sync_info != "hold")
+                continue;
+            const std::string preset_id = preset.setting_id.empty()
+                ? OrcaCloudServiceAgent::generate_uuid_for_setting_id(preset.name, user_id)
+                : preset.setting_id;
+            if (preset_id == setting_id) {
+                coll->set_sync_info_and_save(preset.name, setting_id, "update", 0);
                 break;
             }
         }
@@ -9075,6 +9116,10 @@ static bool del_win_registry(HKEY hkeyHive, const wchar_t *pszVar, const wchar_t
 void GUI_App::associate_files(std::wstring extend)
 {
 #ifdef WIN32
+    // MSIX: shell integration is declared in the package manifest; registry
+    // writes from a packaged process are virtualized and invisible to the shell.
+    if (is_running_in_msix())
+        return;
     wchar_t app_path[MAX_PATH];
     ::GetModuleFileNameW(nullptr, app_path, sizeof(app_path));
 
@@ -9100,6 +9145,8 @@ void GUI_App::associate_files(std::wstring extend)
 void GUI_App::disassociate_files(std::wstring extend)
 {
 #ifdef WIN32
+    if (is_running_in_msix())
+        return;
     wchar_t app_path[MAX_PATH];
     ::GetModuleFileNameW(nullptr, app_path, sizeof(app_path));
 
@@ -9151,6 +9198,8 @@ bool GUI_App::check_url_association(std::wstring url_prefix, std::wstring& reg_b
 void GUI_App::associate_url(std::wstring url_prefix)
 {
 #ifdef WIN32
+    if (is_running_in_msix())
+        return;
     boost::filesystem::path binary_path(boost::filesystem::canonical(boost::dll::program_location()));
     wxString wbinary = from_path(binary_path);
     BOOST_LOG_TRIVIAL(info) << "Downloader registration: Path of binary: " << wbinary.ToUTF8().data();
@@ -9176,6 +9225,8 @@ void GUI_App::associate_url(std::wstring url_prefix)
 void GUI_App::disassociate_url(std::wstring url_prefix)
 {
 #ifdef WIN32
+    if (is_running_in_msix())
+        return;
     wxRegKey key_full(wxRegKey::HKCU, "Software\\Classes\\" + url_prefix + "\\shell\\open\\command");
     if (!key_full.Exists()) {
         return;

src/slic3r/GUI/GUI_Utils.cpp

@@ -24,6 +24,7 @@
 #include <wx/font.h>
 #include <wx/fontutil.h>
 #include <wx/display.h>
+#include <wx/utils.h>
 
 #include "libslic3r/Config.hpp"
 
@@ -171,6 +172,42 @@ template<class F> typename F::FN winapi_get_function(const wchar_t *dll, const c
 }
 #endif
 
+bool is_running_in_msix()
+{
+#ifdef _WIN32
+    // The package identity APIs are Win8+ - resolved dynamically so the exe still loads on Win7
+    // (same treatment as the DPI APIs below). Null-buffer probe: returns ERROR_INSUFFICIENT_BUFFER
+    // when packaged, APPMODEL_ERROR_NO_PACKAGE when running unpackaged.
+    struct GetCurrentPackageFullName_t { typedef LONG (WINAPI *FN)(UINT32 *length, PWSTR full_name); };
+    static const bool packaged = []() {
+        auto fn = winapi_get_function<GetCurrentPackageFullName_t>(L"Kernel32.dll", "GetCurrentPackageFullName");
+        UINT32 length = 0;
+        return fn != nullptr && fn(&length, nullptr) != APPMODEL_ERROR_NO_PACKAGE;
+    }();
+    return packaged;
+#else
+    return false;
+#endif
+}
+
+void open_ms_store_product_page()
+{
+#ifdef _WIN32
+    struct GetCurrentPackageFamilyName_t { typedef LONG (WINAPI *FN)(UINT32 *length, PWSTR family_name); };
+    static auto fn = winapi_get_function<GetCurrentPackageFamilyName_t>(L"Kernel32.dll", "GetCurrentPackageFamilyName");
+    if (fn == nullptr)
+        return;
+    UINT32 length = 0;
+    if (fn(&length, nullptr) != ERROR_INSUFFICIENT_BUFFER)
+        return;
+    std::wstring family_name(length, L'\0');
+    if (fn(&length, family_name.data()) != ERROR_SUCCESS)
+        return;
+    family_name.resize(length > 0 ? length - 1 : 0); // drop the terminating null
+    wxLaunchDefaultBrowser(wxString(L"ms-windows-store://pdp/?PFN=") + family_name.c_str());
+#endif
+}
+
 // If called with nullptr, a DPI for the primary monitor is returned.
 int get_dpi_for_window(const wxWindow *window)
 {

src/slic3r/GUI/GUI_Utils.hpp

@@ -67,6 +67,10 @@ wxDECLARE_EVENT(EVT_VOLUME_DETACHED, VolumeDetachedEvent);
 
 wxTopLevelWindow* find_toplevel_parent(wxWindow *window);
 wxString format_nozzle_diameter(float diameter);
+// True when running inside an MSIX package (Microsoft Store build); always false on non-Windows.
+bool is_running_in_msix();
+// Opens the Microsoft Store product page for the current package. No-op when not packaged.
+void open_ms_store_product_page();
 
 void on_window_geometry(wxTopLevelWindow *tlw, std::function<void()> callback);
 

src/slic3r/GUI/NotificationManager.cpp

@@ -2416,7 +2416,7 @@ void NotificationManager::OrcaSyncConflictNotification::render_text(ImGuiWrapper
 	}
 
 	const float action_y = starting_y + m_endlines.size() * shift_y;
-	const std::string pull_text = _u8L("Pull");
+	const std::string pull_text = conflict_code == -3 ? _u8L("Delete") : _u8L("Pull");
 	render_hyperlink_action(imgui, x_offset, action_y, pull_text, "##orca_sync_pull",
 		[this] { if (m_pull_callback && m_pull_callback(m_evt_handler)) close(); });
 	if (m_force_push_callback) {
@@ -2437,13 +2437,14 @@ void NotificationManager::push_shared_profiles_notification(const std::string& e
 }
 
 void NotificationManager::push_orca_sync_conflict_notification(const std::string& text,
+	int conflict_code,
 	std::function<bool(wxEvtHandler*)> pull_callback,
 	std::function<bool(wxEvtHandler*)> force_push_callback)
 {
 	close_notification_of_type(NotificationType::OrcaSyncConflict);
 	NotificationData data{ NotificationType::OrcaSyncConflict, NotificationLevel::WarningNotificationLevel, 0, text };
 	push_notification_data(std::make_unique<NotificationManager::OrcaSyncConflictNotification>(
-		data, m_id_provider, m_evt_handler, std::move(pull_callback), std::move(force_push_callback)), 0);
+		data, m_id_provider, m_evt_handler, std::move(pull_callback), std::move(force_push_callback), conflict_code), 0);
 }
 
 void NotificationManager::push_download_URL_progress_notification(size_t id, const std::string& text, std::function<bool(DownloaderUserAction, int)> user_action_callback)

src/slic3r/GUI/NotificationManager.hpp

@@ -279,6 +279,7 @@ public:
 	// Shared profiles available for selected printer
 	void push_shared_profiles_notification(const std::string& explore_url);
 	void push_orca_sync_conflict_notification(const std::string& text,
+		int conflict_code,
 		std::function<bool(wxEvtHandler*)> pull_callback,
 		std::function<bool(wxEvtHandler*)> force_push_callback);
 
@@ -905,10 +906,12 @@ private:
 	public:
 		OrcaSyncConflictNotification(const NotificationData& n, NotificationIDProvider& id_provider, wxEvtHandler* evt_handler,
 			std::function<bool(wxEvtHandler*)> pull_callback,
-			std::function<bool(wxEvtHandler*)> force_push_callback)
+			std::function<bool(wxEvtHandler*)> force_push_callback,
+			int conflict_code)
 			: PopNotification(n, id_provider, evt_handler)
 			, m_pull_callback(std::move(pull_callback))
 			, m_force_push_callback(std::move(force_push_callback))
+			, conflict_code(conflict_code)
 		{
 			m_multiline = true;
 		}
@@ -920,6 +923,7 @@ private:
 
 		std::function<bool(wxEvtHandler*)> m_pull_callback;
 		std::function<bool(wxEvtHandler*)> m_force_push_callback;
+		int conflict_code;
 	};
 	class SlicingProgressNotification;
 

src/slic3r/GUI/Preferences.cpp

@@ -1846,6 +1846,26 @@ void PreferencesDialog::create_items()
     //// ASSOCIATE TAB 
     /////////////////////////////////////
 #ifdef _WIN32
+    // MSIX: associations are declared in the package manifest and defaults are
+    // managed by Windows Settings; the runtime registry toggles below cannot work.
+    // Show a minimal page that sends the user to Windows' Default Apps settings instead.
+    if (is_running_in_msix()) {
+        m_pref_tabs->AppendItem(_L("Associate"));
+        f_sizers.push_back(new wxFlexGridSizer(1, 1, v_gap, 0));
+        g_sizer = f_sizers.back();
+        g_sizer->AddGrowableCol(0, 1);
+
+        g_sizer->Add(create_item_title(_L("Associate files to OrcaSlicer")), 1, wxEXPAND);
+
+        auto item_open_default_apps = create_item_button(
+            _L("File associations for the Microsoft Store version are managed by Windows Settings."),
+            _L("Open Windows Default Apps Settings"), "", "",
+            []() { wxLaunchDefaultBrowser("ms-settings:defaultapps"); });
+        g_sizer->Add(item_open_default_apps);
+
+        g_sizer->AddSpacer(FromDIP(10));
+        sizer_page->Add(g_sizer, 0, wxEXPAND);
+    } else {
     m_pref_tabs->AppendItem(_L("Associate"));
     f_sizers.push_back(new wxFlexGridSizer(1, 1, v_gap, 0));
     g_sizer = f_sizers.back();
@@ -1880,6 +1900,7 @@ void PreferencesDialog::create_items()
 
     g_sizer->AddSpacer(FromDIP(10));
     sizer_page->Add(g_sizer, 0, wxEXPAND);
+    }
 #endif // _WIN32
 
     //////////////////////////

src/slic3r/GUI/ReleaseNote.cpp

@@ -5,6 +5,7 @@
 #include "libslic3r/Thread.hpp"
 #include "GUI.hpp"
 #include "GUI_App.hpp"
+#include "GUI_Utils.hpp"
 #include "GUI_Preview.hpp"
 #include "MainFrame.hpp"
 #include "format.hpp"
@@ -252,7 +253,9 @@ UpdateVersionDialog::UpdateVersionDialog(wxWindow *parent)
     m_text_up_info = new Label(this, Label::Head_14, wxEmptyString, LB_AUTO_WRAP);
     m_text_up_info->SetForegroundColour(wxColour(0x26, 0x2E, 0x30));
 
-    auto github_link = new HyperLink(this, _L("Check on Github"), "", LB_AUTO_WRAP);
+    // Store builds get updates from the Microsoft Store: wxID_YES opens the Store
+    // product page there (see the EVT_SLIC3R_VERSION_ONLINE handler) instead of GitHub.
+    auto github_link = new HyperLink(this, is_running_in_msix() ? _L("Check on Microsoft Store") : _L("Check on Github"), "", LB_AUTO_WRAP);
     github_link->Bind(wxEVT_LEFT_DOWN, [this](wxMouseEvent &e) {
         EndModal(wxID_YES);
     });
@@ -302,7 +305,7 @@ UpdateVersionDialog::UpdateVersionDialog(wxWindow *parent)
 
     auto sizer_button = new wxBoxSizer(wxHORIZONTAL);
 
-    m_button_download = new Button(this, _L("Download"));
+    m_button_download = new Button(this, is_running_in_msix() ? _L("Open Microsoft Store") : _L("Download"));
     m_button_download->SetStyle(ButtonStyle::Confirm, ButtonType::Choice);
 
     m_button_download->Bind(wxEVT_LEFT_DOWN, [this](wxMouseEvent &e) {
@@ -479,7 +482,10 @@ void UpdateVersionDialog::update_version_info(wxString release_note, wxString ve
     // else {
     //m_simplebook_release_note->SetMaxSize(wxSize(FromDIP(560), FromDIP(430)));
     m_simplebook_release_note->SetSelection(1);
-    m_text_up_info->SetLabel(wxString::Format(_L("Click to download new version in default browser: %s"), version));
+    if (is_running_in_msix())
+        m_text_up_info->SetLabel(wxString::Format(_L("New version available: %s. Please update OrcaSlicer from the Microsoft Store."), version));
+    else
+        m_text_up_info->SetLabel(wxString::Format(_L("Click to download new version in default browser: %s"), version));
     auto data_buf_in = release_note.utf8_str();
     auto bg_color = StateColor::darkModeColorFor(wxColour("#FFFFFF")).GetAsString();
     auto fg_color = StateColor::darkModeColorFor(wxColour("#262E30")).GetAsString();

src/slic3r/Utils/OrcaCloudServiceAgent.cpp

@@ -101,24 +101,6 @@ std::string resolve_display_name(
     return username;
 }
 
-std::string generate_uuid_for_setting_id(const std::string& name, const std::string& user_id = "")
-{
-    if (name.empty()) {
-        return "";
-    }
-
-    // Mix user_id into the hashed input so two different users generating a setting_id
-    // for an identically-named preset get distinct UUIDs. Without this, the cloud's ID
-    // space collides across accounts and the second user's create gets HTTP 409 with
-    // server_profile=null on every sync (the foreign owner's record is not exposed).
-    static const boost::uuids::uuid orca_namespace =
-        boost::uuids::string_generator()("f47ac10b-58cc-4372-a567-0e02b2c3d479");
-
-    boost::uuids::name_generator_sha1 gen(orca_namespace);
-    boost::uuids::uuid id = user_id.empty() ? gen(name) : gen(user_id + "/" + name);
-    return boost::uuids::to_string(id);
-}
-
 std::string base64url_encode(const std::vector<unsigned char>& data)
 {
     std::string out;
@@ -412,6 +394,24 @@ OrcaCloudServiceAgent::~OrcaCloudServiceAgent()
     }
 }
 
+std::string OrcaCloudServiceAgent::generate_uuid_for_setting_id(const std::string& name, const std::string& user_id)
+{
+    if (name.empty()) {
+        return "";
+    }
+
+    // Mix user_id into the hashed input so two different users generating a setting_id
+    // for an identically-named preset get distinct UUIDs. Without this, the cloud's ID
+    // space collides across accounts and the second user's create gets HTTP 409 with
+    // server_profile=null on every sync (the foreign owner's record is not exposed).
+    static const boost::uuids::uuid orca_namespace =
+        boost::uuids::string_generator()("f47ac10b-58cc-4372-a567-0e02b2c3d479");
+
+    boost::uuids::name_generator_sha1 gen(orca_namespace);
+    boost::uuids::uuid id = user_id.empty() ? gen(name) : gen(user_id + "/" + name);
+    return boost::uuids::to_string(id);
+}
+
 void OrcaCloudServiceAgent::configure_urls(AppConfig* app_config)
 {
     if (!app_config) return;
@@ -1250,8 +1250,10 @@ SyncPushResult OrcaCloudServiceAgent::sync_push(const std::string& profile_id,
 
     if (http_code == 409) {
         // Conflict - parse server version
+        nlohmann::json err_body;
         try {
             auto json = nlohmann::json::parse(response);
+            err_body = json;
             if (json.is_null()) {
                 result.server_deleted = true;
             } else {
@@ -1261,6 +1263,13 @@ SyncPushResult OrcaCloudServiceAgent::sync_push(const std::string& profile_id,
                 result.server_version.updated_time = profile_data.value(ORCA_JSON_KEY_UPDATE_TIME, 0);
             }
         } catch (...) {}
+        // Surface the conflict via the http-error callback with the local preset name injected.
+        // The raw server body omits the name for tombstone (-3) conflicts (server_profile is null),
+        // but the GUI needs it to regenerate the deterministic setting_id for a force push.
+        if (!err_body.is_object())
+            err_body = nlohmann::json::object();
+        err_body["name"] = name;
+        invoke_http_error_callback(409, err_body.dump());
         result.error_message = response;
         return result;
     }
@@ -1937,7 +1946,10 @@ int OrcaCloudServiceAgent::http_post(const std::string& path, const std::string&
     if (response_body) *response_body = res.body;
     if (http_code) *http_code = res.status;
 
-    if (!suppress && (!res.success || res.status >= 400)) {
+    // 409 is a push-only domain conflict; sync_push re-fires the error callback with the
+    // local preset name injected (the raw server body omits it for tombstone conflicts),
+    // so skip the generic nameless auto-fire here to avoid a duplicate, nameless event.
+    if (!suppress && (!res.success || res.status >= 400) && res.status != 409) {
         invoke_http_error_callback(res.status, res.body);
     }
 

src/slic3r/Utils/OrcaCloudServiceAgent.hpp

@@ -300,6 +300,8 @@ public:
     bool set_user_session(const nlohmann::json& session_json, bool notify_login = true);
     void clear_session();
 
+    static std::string generate_uuid_for_setting_id(const std::string& name, const std::string& user_id = "");
+
 private:
     // Sync protocol helpers
     int sync_pull(