save_current_preset() generierte eine P-ID nur bei leerem filament_id.
Von Hersteller-Presets abgeleitete Presets erben aber dessen Vendor-ID
(z.B. GFA001), wodurch sync_ams_list() auf das Vendor-Preset zurueckfiel
statt das User-Preset zu waehlen. Bedingung an Preset::save() angeglichen:
auch non-P IDs werden jetzt durch eine eigene P-ID ersetzt.
Doku (DE/EN/ES) und Version auf 2.4.0-alpha-kx3 aktualisiert.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* Fix junction deviation and jerk settings behavior
Process settings now follow the selected printer's junction deviation
configuration. When machine_max_junction_deviation is enabled,
default_junction_deviation is shown and jerk settings are hidden. When
junction deviation is disabled, jerk settings are restored and
default_junction_deviation is hidden.
Fix a validation issue where junction deviation mismatch warnings could
be reported even when machine_max_junction_deviation was set to 0.
Warnings now apply only when junction deviation is active and point
directly to default_junction_deviation.
Also simplify Motion ability page visibility checks by reusing local
firmware-flavor booleans.
* GUI tweak
- separate Junction Deviation segment
- JD and Jerk stay visible
Switching to a printer with fewer filaments (e.g. H2D -> X2D) threw
std::out_of_range in check_filament_printable. Clear stale per-volume
extruder config on count shrink and bound-check filament indices at the
read sites.
* Fix SeeMeCNC Multicolor change
* Fixes for Support
Support fixes for .7 and 1.0 nozzles
* Fix Retractions
* FIX
* bump version
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
## Summary
Adds end-to-end Creality K-series (K2 / K2 Plus / K2 Pro) host support
to OrcaSlicer in a single bundle, per [@SoftFever's request to
consolidate](https://github.com/OrcaSlicer/OrcaSlicer/pull/13752#issuecomment-4560837450)
the previously stacked PRs. Three logically separable features, all
gated on `host_type=crealityprint`:
1. **LAN auto-discovery** — `Browse...` in the Physical Printer dialog
now finds K-series printers on the local network via a DNS-SD
meta-browser (per-device-unique service names
`_Creality-<MAC>._udp.local.`). Other host types unchanged.
2. **CFS filament sync** — `CrealityPrintAgent` (inheriting
`MoonrakerPrinterAgent`) queries the K-series WebSocket on `:9999` for
`boxsInfo`, maps loaded CFS slots to Orca filament presets, and
populates the Sidebar via the standard `fetch_filament_info` →
`build_ams_payload` path. Matches the shape of `MoonrakerPrinterAgent` /
`QidiPrinterAgent` / `SnapmakerPrinterAgent` per [the earlier review
feedback](https://github.com/OrcaSlicer/OrcaSlicer/pull/13752#discussion_r3278574545).
3. **K-series filament profiles** — system profiles for CR-PLA / CR-PETG
/ CR-ABS / CR-Silk / CR-TPU / CR-Nylon / CR-Wood / Hyper PLA / etc. on
K2 / K2 Plus / K2 Pro nozzle sizes (imported from CrealityPrint v7.1.0+,
normalised to OrcaSlicer profile conventions).
The previous stack base (#13291, *CrealityPrint as host type*, by
@imammedo) is **also bundled into this PR** since it's currently
conflicting with main and not moving. Happy to extract it back out if
@imammedo's PR is preferred to land first for attribution — let me know.
## What this PR is *not*
- **No new UI surfaces.** All three features hook into existing UI
(Browse button, Sidebar sync icon, filament dropdowns).
- **No phone-home / telemetry.** No Hark Tech endpoints, no licence
checks, no opt-in dialogs. Pure upstream feature work.
- **No K-series-specific Device tab.** Embedded WebView falls back to
Fluidd/Mainsail on `:4408`, same shape as the existing Moonraker
integration.
## Screenshots
Captured against a K2 Combo (F021, firmware v1.1.260206) on the v4 test
build:
| | |
|---|---|
| 
| **Discovery dialog** — `Browse...` flow on a `host_type=crealityprint`
printer. Click → ~5–10 s LAN scan → K2 found with model + hostname + IP.
|
| 
| **CFS filament sync** — Sidebar after clicking the sync icon: 4 slots
populate with the real loaded CFS spools (3× Hyper PLA + 1× CR-Silk). |
| 
| **Device tab** — Mainsail loaded into the embedded WebView for
`host_type=crealityprint`, mid-print state visible. |
## What's added
### LAN discovery
- **`deps_src/mdns/`** — vendors
[mjansson/mdns](https://github.com/mjansson/mdns) (public domain) plus
Creality's `cxmdns` C++ wrapper from CrealityPrint v7.1.1 (AGPL-3.0,
compatible with OrcaSlicer's AGPL-3.0). Attribution in
`deps_src/mdns/NOTICE.md`.
- **`Utils/CrealityHostDiscovery.{hpp,cpp}`** — synchronous DNS-SD scan
+ per-host `GET /info` probe. Maps model codes `F008` / `F012` / `F021`
→ K2 Plus / K2 Pro / K2.
- **`GUI/CrealityDiscoveryDialog.{hpp,cpp}`** — modal `wxDialog` showing
Model / Hostname / IP for each discovered host.
- **`src/slic3r/CMakeLists.txt`** — adds `Iphlpapi.lib` and `Ws2_32.lib`
to `libslic3r_gui`'s MSVC link line (needed by `GetAdaptersAddresses` +
Winsock2 calls in vendored `mdns.c`).
### CFS filament sync
- **`Utils/CrealityPrintAgent.{hpp,cpp}`** — inherits
`MoonrakerPrinterAgent`, overrides `fetch_filament_info()` to query the
K-series WS protocol on `:9999`, build `AmsTrayData`, and call inherited
`build_ams_payload()`. No printer-specific code lives outside the agent.
- K2 Plus slot-state parser handles the three documented slot states
(`0` empty / `1` manually entered / `2` RFID-tagged) per [DaviBe92's
reverse-engineering docs](https://github.com/DaviBe92/k2-websocket-re).
### K-series filament profiles
- ~110 profile JSONs under `resources/profiles/Creality/filament/`
covering K2 / K2 Plus / K2 Pro × 0.2 / 0.4 / 0.6 / 0.8 nozzle combos ×
CR-PLA / CR-PETG / CR-ABS / CR-Silk / CR-TPU / CR-Nylon / CR-Wood /
Hyper PLA / Hyper PETG-GF / Hyper PLA-CF / etc.
- Imported from CrealityPrint v7.1.0; normalised to OrcaSlicer profile
conventions (tabs not spaces, no `{if !multicolor_method}` wrappers,
`filament_vendor: ["Creality"]` on Creality Generic profiles).
## Tester confirmations on the v4 test build
| Printer | Firmware | Result | Reporter |
|---|---|---|---|
| K2 Pro | v1.1.5.5 / CFS v1.4.2 | ✅ LAN discovery on #13752 test build
|
[@Requiem-MH](https://github.com/OrcaSlicer/OrcaSlicer/pull/13752#issuecomment-4495235225)
|
| K2 Pro | v1.1.5.5 / CFS v1.4.2 | ✅ CFS sync across 1-CFS, 2-CFS,
partial, full configurations |
[@Requiem-MH](https://github.com/OrcaSlicer/OrcaSlicer/pull/13744#issuecomment-4495230061)
|
| K2 Plus | v1.1.5.2 / CFS v1.2.2 | ✅ Slot-state fix resolves the
partial-sync regression |
[@DaviBe92](https://github.com/OrcaSlicer/OrcaSlicer/pull/13744#issuecomment-4499425852)
|
| K2 Plus | v1.1.5.5 / CFS v1.4.2 | ✅ All slots syncing correctly after
fix |
[@swilsonnc](https://github.com/OrcaSlicer/OrcaSlicer/pull/13744#issuecomment-4503273127)
|
| K2 Plus | (Reddit u/TrainAss) | ✅ Both PLA + PETG slots populated
correctly |
[@TrainAss](https://github.com/OrcaSlicer/OrcaSlicer/pull/13744#issuecomment-4503401664)
|
| K1C | (latest stock) | ✅ `boxsInfo` payload format compatible (4 slots
of generic PETG) |
[@JoveYu](https://github.com/OrcaSlicer/OrcaSlicer/pull/13744#issuecomment-4519036448)
|
## Known follow-ups (out of scope)
- **Snapmaker U1 regression**
([@TrainAss](https://github.com/OrcaSlicer/OrcaSlicer/pull/13744#issuecomment-4529350262)):
the v3 build also happened to sync filament from his U1; v4 regressed
this. The refactor only touches `htCrealityPrint`-gated code so this is
likely incidental — needs his config + logs to diagnose. Will follow up
in a separate issue once this lands.
- **Native Device tab for K-series**: deferred. Current Mainsail WebView
shim covers the common case.
- **#13581 (@hamham999) profile overlap**: confirmed minimal code
conflict (zero), profile-file overlap of ~204 files. Whichever PR lands
second rebases off the other.
## Test plan
- [x] Linux build clean on commit `<UPDATED AFTER BUILD>` (LXC 104, GCC
12, cmake)
- [x] MSVC link clean (manual VS 2026 / MSVC 14.51 build)
- [x] End-to-end on real hardware: K2 Combo, K2 Pro, K2 Plus, K1C
- [x] `host_type ≠ htCrealityPrint` paths unchanged — Bonjour fires for
OctoPrint, Flashforge picker fires for Flashforge, Moonraker / Qidi /
Snapmaker agents unchanged
- [x] Profile-validation CI green (was a separate Elegoo test-fixture
failure on main, not introduced by this PR)
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Co-authored-by: Igor Mammedov <niallain@gmail.com>
Co-authored-by: grant0013 <grant@harktech.co.uk>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: hamham999 <hamham999@users.noreply.github.com>
Co-authored-by: Alys Andreollo <3528187+alysandreollo@users.noreply.github.com>
The SPARKX i7 machine presets shipped (via #13947) with a contributor's
LAN IP (http://10.10.1.39) hardcoded in print_host. Remove it to match
the K2/K2 Pro/K2 Plus presets, which carry no print_host key — LAN
discovery + the crealityprint agent populate the host at add-printer time.
This updates the SPARKX i7 from a "regular" klipper printer to use the
new CrealityPrinter agent, that talks to it's "supervisor" webserver
instead, and can use the native Creality features: CFS, filament
querying, filament remapping, etc...
* init
* update translations
* clarify warning for rebuild
* auto fill issue field on github with gathered system information
* add detection for linux package type
* fix build errors
* update
* update
* improve reading windows version
* add multi file support for zip and use timestamp on exported zip name
* fix errors
* fix errorz
* fix URL encoding
* fix CPU info
* use home or desktop as default location
* fix distro name on flatpak
* improve detecting local build on linux
* check package type on all platforms
* optimize margins
* improve monitor detection
* add support for adding text file to zip and add system info on export
* exclude user related info from config
* improve exporting profile info
* fix linux monitor info
* update
* update detecting monitor info
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* revert scaling and resolution detection for linux
* include project file to zip and notify after saving zip successfully saved
* improve monitor info on mac
* update
* improve packing selection menu
* update
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* update
* update
* make hash clickable
* fix compatible process counting
* export profiles overview instead copying to clipboard
* auto restart app after cleaning system folder
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
ws2_32 (Winsock2) and wsock32 (Winsock) are not supposed to be used in the same application.
boost::asio requires ws2_32, but wxWidgets uses wsock32.
Which gets used depends on the order they appear in the link command, as they both define the same symbols, but with different behaviour.
ws2_32 is backwards-compatible with wsock32, so wxWidgets won't be negatively affected by linking with the newer version, and prior to c228ab2da1, that's what happened.
That commit reordered how some libraries were passed to the linker, so swapped the order of these two, breaking mDNS and causing https://github.com/OrcaSlicer/OrcaSlicer/issues/13969
The CFS-aware filament sync resolves its agent via switch_printer_agent(),
which reads the preset's `printer_agent` field and falls back to "orca" when
unset -- so the K-series presets need printer_agent="crealityprint" (the id
registered by CrealityPrintAgent) in addition to host_type="crealityprint"
(classic PrintHost/LAN-discovery). Without printer_agent the Device-tab sync
defaults to the Orca agent and CFS sync doesn't engage. Set both on the
F008/F012/F021 models that supports_multi_color_print() covers (not K2 SE).
Both keys are in s_PhysicalPrinter_opts, so a new Physical Printer inherits
them from the preset.
* Add test for Arachne duplicate wall segment detection
Add test cases that reproduce an issue where Arachne generates
duplicate/coinciding extrusion segments at certain min_bead_width settings.
Test configuration:
- Profile: 0.28mm Extra Draft @BBL X1C (0.4mm nozzle, 0.28mm layer)
- outer_wall_line_width: 0.42mm, inner_wall_line_width: 0.45mm
- wall_loops: 2, precise_outer_wall: enabled
- Test polygon: outer rectangle (0,0)-(20,20) with inner cutout (0.5,0.5)-(19.5,19.5)
This creates a 0.5mm wide frame around the perimeter.
Results:
- 50% min_bead_width (0.20mm): FAILS - detects 4 duplicate segments (all 4 sides)
- 60% min_bead_width (0.24mm): PASSES - no duplicates
At 50%, Arachne generates two separate closed loops that share all 4 edges
of the inner square. At 60%, Arachne generates a single closed loop.
SVG output is exported to /tmp/opencode/ for visual debugging.
* Fix Arachne duplicate extrusion caused by bead count mismatch
WideningBeadingStrategy::compute() used optimal_width (inner wall width)
to determine if a thin wall should produce a single bead. However,
getOptimalBeadCount() uses optimal_width_outer (outer wall width) via
RedistributeBeadingStrategy to decide the bead count.
This inconsistency caused situations where getOptimalBeadCount() returned
2 beads, but compute() produced only 1 bead at full thickness. The single
bead was then generated for both inner and outer contours, resulting in
duplicate extrusion paths.
Fix: Use getTransitionThickness(1) instead of optimal_width. This method
returns the exact threshold for the 1-to-2 bead transition, ensuring
consistency between bead count calculation and bead generation.
Reproduces with: 50% min_bead_width, 0.42mm outer wall, 0.45mm inner wall,
0.5mm polygon inset creating ~0.38mm wall thickness.
Fixes#13917
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Linux compositing - retain old code and make switchable via #if statement
* Make option settable via env variable/.desktop file
* undo accidental empty row delete
