* Revert "fix more Flashforge issues"
This reverts commit 6e473fd5fa.
* Revert "Fixed an issue that some Flashforge filament profiles don't' have compatible_printers defined which cause filament selection dialog didn't filter properly"
This reverts commit f8c0cdfb11.
* Revert "Merged Orca-Flashforge 1.3 branch (Added AD5X & G4P) + fixes & optimizations (#8461)"
This reverts commit b8e4ce75e0, reversing
changes made to be8bf54884.
* Fix OCCT and OpenCV patching during build
The inclusion of the `--directory` flag here isn't necessary because of
how `PATCH_COMMAND` applies patches. In fact this causes issues when
trying to build from an archive, `--directory` seems to imply `--index`
and thus this patch only succeeds if you're inside an initialized git
repo. If you simply use the archive without a git repo the build fails
at the patch step.
* Alter patch command based on git repo status
`git apply` has different behavior when inside a git repo vs not. If
we're in a git repo we need to fully quality the path for these patches,
otherwise we can omit the directory flag.
---------
Co-authored-by: Joe Palazzolo <joe@joepalazzolo.net>
* Misc fixes on the pt-BR translation
* Fix the pt-BR translation of "Wipe Tower"
* Fix the pt-br translation of "ooze"
* Fix pt-BR translations of "flip", "roll", "rotate"
* Fix translations of "preset", "profile", "template", "model"
* Fix the pt-br translation of "nozzle"
* Fix the pt-br translation of "overhang"
* Fix the pt-br translation of "threshold"
* Fix the pt-br translation of "scarf joint"
- Fix crash when selected bed type is not supported by current version.
This could happen if you downgrade Orca to old version that does not
have that bed type.
- For example, if you ever run 2.3.0-beta and having current bed type
set to the last one from the drop down, then if you use 2.2 again the
app will crash during startup.
- This PR fix this by falling back to default bed type if current value
is out of range.
- This PR also fixes issue that current bed type is changed after
upgrading to 2.3 from previous version, due to adding the supertack in
the wrong place in the enum.
and modify the overlap of wall and infill for wipe tower jira:none
cherry picked from commit
bambulab/BambuStudio@4db196b11f
Thanks BambuLab!
- Optimize the starting position of the printing wiper tower after
material change, the initial print on the wipe tower sometimes had
under-extrusion issues, and all layers of wipe tower have the same
starting position, increasing the risk of collision. This optimization
distributes the initial extrusion over four corners, reducing the
accumulation of defects.
- Reducing the rivet length between the wipe tower's outer wall and
infill to 0mm minimizes the risk of collision when switching between
printing infill and outer walls.
# Description
Fixed two regressions:
1. Total layer number was missing for BBL printers
2. M73 remaining info was wrong when ARC fitting is enabled.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
