Warn for first and other layers big temperature delta
Warn user if temperature differences (first layer vs other layers) for nozzle and plates are above a certain delta.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fix support interface semantics and gap handling
Fix zero-gap interface detection and gap initialization for supports and raft.
Ensures correct top/bottom contact semantics and avoids relying on default zero gaps.
* Additional fixes and robustness improvements
Fix incorrect coupling between top and bottom support interface spacing and density, ensuring bottom interfaces use their own parameters for smoothing and toolpath generation.
Restore correct bottom interface generation for organic (tree) supports when a non-zero bottom Z gap is used, and preserve contacts even when base polygons are empty.
Improve robustness of organic support slicing by fixing layer index drift and guarding against degenerate polygon boolean operations.
* Typo and semantics fix
differnt_support_interface_filament -> different_support_interface_filament
soluble -> zero_top_z_gap
* Fix non organic tree bottom support interface generation
Slim tree bottom interface layer numbers were capped by the object's layer number beneath it.
Fixed by refactoring the generation algorithm.
* Fix non organic tree interlaced support generation
Deterministic local interlaced support layers generation for non-organic tree support
* Enable support interface multimaterial for non organic tree
Enables mixed-material support interface behavior for non organic tree support type.
* Fix tree support interface layer counts and contact handling
- Correct non‑organic tree top interface layer budgeting so gaps don’t consume a layer (N stays N).
- Remove the extra roof interface pass that was duplicating the 2nd layer.
- Organic tree: use only the lowest contact footprint and avoid extra bottom‑contact extrusion so interface count matches the user setting.
* Bugfixes (a lot)
Many, many bugs fixed, majority edge-case but still not playing by the rule.
Some of them:
- on multilevel base, on very small level variations the support was capped to the topmost level height
- non-organic tree had gaps for supports in a multilevel base situiation
- independent support layer height had issues with support interfaces (base support beneath bottom interface, top contact layer sometimes missing)
- organic tree had issues with small variation multi-level base
- organic tree support with zero top Z distance could overlap support-material and interface-material paths when separate materials were used
- many, many others (I lost track of them)
Fix "Jump to" links opening wrong preset type
Fixes an issue where notification "Jump to" links always assumed the target setting belongs to the Print preset.
Resolve the correct preset type for each option before jumping to it, and only switch to object settings when the target is a Print preset.
Result: links now correctly open the intended setting across all preset types.
* Make filament compatibility temperature-aware
Extend filament compatibility checks to consider actual nozzle temperatures and temperature ranges.
Print::check_multi_filaments_compatibility now accepts nozzle temperatures and range lows/highs; it resolves missing ranges from material defaults, computes per-filament effective temperatures, and checks pairwise compatibility (including high/low/mid mixed cases).
Updated callers in Print::check_multi_filament_valid and CalibrationWizardPresetPage to pass nozzle settings, consolidated user-facing warning strings, and fixed extruder index handling and minor logic/path improvements.
Clarify incompatible nozzle temperature warnings
* Update Print.cpp
* Remove json usage
* Reduce messages
* Clean up code
* Filament mapping select ext slot automatically when no AMS filament inserted (OrcaSlicer/OrcaSlicer#13103)
* Show warning if external filament type does not match the one in sliced file
* Disable arc fitting by default on BBL P2S
* Update BBL P2S printer profile
* bump the version so that it automatically update the cache
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add safety checks and add logic to avoid creating degenerate polygons in contour_extrusion_path
* fix comment
* fix(zaa): cast from slice_z upward only, guard normal on miss
* remove old code
---------
Co-authored-by: Aleksandr Dobkin <alex@dobk.in>
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* fix: manual filament change not emitting MANUAL_TOOL_CHANGE for BBL printers
BBL-specific M1020 S handling in toolchange() bypassed toolchange_prefix(),so manual_filament_change had no effect — M1020 was always emitted regardless of the setting. Move the BBL logic into toolchange_prefix() so all callers respect the option consistently.
Fixes#11795
* add comment
