* Change G-Code
* Change config to closely match prusa profile
The profile can be found at https://forum.prusa3d.com/forum/prusaslicer/looking-for-a-dremel-3d45-profile-for-prusa-slicer-help-me-help-my-students/
* Use original build plate model
* Change printable area
* Update machine settings
* Change bed model naming
* Prevent future conflicts
* Update values
* Fix error
* Disable firmware retraction
* Enable reduce infill retraction
* Fully disable relative e distances
* Fix filename format
* Revert "Fix filename format"
This reverts commit b95e76a57a1fcf796a658bcbf616ed77d79298d1.
* Forgot this one
* Clean up
* Update OrcaSlicer_es.po
* some changes
* Some fixes
* More fixes
* More fixes and improves
* More fixes
* Update OrcaSlicer_es.po
* Update OrcaSlicer_es.po
Cambiado punto por coma
* Update Spanish Language
* Updated strings
* Update OrcaSlicer_es.po
* Update OrcaSlicer_es.po
* Fixed Spanish Strings in English
Fixed a lot of string whose are translations were english to english.
* added Prusa Mini with Input Shaper to profiles
* refactoring to more reusable settings
* added more processes, changed settings
* Update 0.15mm Speed @MINIIS.json
* Update 0.10mm Speed @MINIIS.json
* changed to cubic because of speed
* further changes after reviewing prusa slicer settings
* simplified machine settings
* retraction speeds according to prusa slicer
* changed max flow according to prusa slicer
* after clearification at the prusaslicer repository M900 got removed
* precise wall per default
* enable reverse overhang on odd by default
* added settings from prusa slicer
* changed cooling setings
* changed default to inner-outer-inner wall
inner-outer-inner gives pretty good overhangs with better surface
* new profiles for bigger nozzles, changed some cooling settings according to prusaslicer
* profiles for different nozzles sizes, better speed settings
* initial layer height was wrong
* wrong initial layer height
* set the correct accelerations
* changed firmware version number
* using pressure advance UI setting instead of custom filament g-code
* Update Prusa Generic PC.json
* Update Prusa Generic PC.json
* changed max flow for PC
* added PVA filament profiles
* bug fix in filament loading
* changed line width according to prusa slicer
* changed heatbed temperature for Minis capabilities
* set default support to snug
* changed default filament setting to the correct value
* changed line with to the correct values according to prusaslicer profiles
* Update Prusa MINIIS 0.4 nozzle.json
updated firmware version
* updated firmware version
* changed first layer height according to optimal value of the respective nozzle size
* changed wall loops to 2 for bigger nozzles
* Update fdm_filament_abs.json
Modification based on chamber temperature
* Update fdm_filament_asa.json
Modification based on chamber temperature
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json
Modification based on chamber temperature
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle.json
Modification based on chamber temperature
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle.json
Modification based on chamber temperature
* Update QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json
Modification based on chamber temperature
* Update Qidi Generic ABS.json
Modification based on chamber temperature
* Update Qidi Generic ASA.json
Modification based on chamber temperature
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json
Sorry, there is still a parameter that needs to be modified for this type of consumable
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.6 nozzle.json
Sorry, there is still a parameter that needs to be modified for this type of consumable
* Update QIDI ABS-GF25 @Qidi Q1 Pro 0.8 nozzle.json
Sorry, there is still a parameter that needs to be modified for this type of consumable
* Update Qidi Q1 Pro 0.4 nozzle.json
Parameter modification
* Update fdm_qidi_x3_common.json
Parameter modification
* Update Qidi Q1 Pro 0.4 nozzle.json
Gcode Change
* Update fdm_qidi_x3_common.json
Gcode Change
* Merge branch 'main' into main
* Prevent Cmd-Shift-M from minimizing on Mac EXCEPT on "Home" sub-screen
The problem is that hitting "Cmd-Shift-M" on mac always minimizes the app, even though it should only minimize on "Cmd-M", and not on "Cmd-Shift-M".
The code that minimizes (using the WXWidgets "Iconize()" call) happens in MainFrame.cpp keyboard event loop. The code that's checking, looks for "Cmd-M" but does not check for any other keyboard modifiers, so I added a check to ignore the event if Shift is pressed along with "Cmd-M".
There's a secondary issue that isn't really relevant to this bug in that the app will still minimize when pressing "Cmd-Shift-M", but ONLY on the "Home" sub-screen. (all other sub-screens work as they should).
I'm not sure why, but when the "Home" sub-screen is selected, the keyboard event loop (MainFrame.cpp, line 609), is called TWICE when "Cmd-Shift-<any key>" is pressed:
* Once where the event's wxKeyModifier (retrieved via `evt.GetModifiers()` is set to `wxMOD_CONTROL` AND `wxMOD_SHIFT`. (this is correct)
* Once where the event's wxKeyModifier is **ONLY** set to `wxMOD_CONTROL` (this is wrong).
Again, this double-event (with the wrong modifiers) only happens when the user is on the "Home" sub-screen. For the context of this bug the 3DConnexion preferences dialog isn't needed on the "Home" sub-screen so this secondary bug doesn't matter. But it does make the UX odd where Cmd-Shift-M will minimize the app when the user is viewing the "Home" sub-screen, but not minimize the app when the user is viewing any other sub-screen.
* Merge branch 'main' into spacemouse_dialog
fixes includes:
1. 0.6 and 0.8 nozzles are not displayed
2. Some filaments are not enabled for 0.6 0.8 nozzle
3. version number
4. change default sparse_infill_pattern to crosshatch
5. change top_surface_pattern to monotonicline
