Since the wxWidgets 3.3 upgrade the Slice/Print split-button's transient
popup was dismissed the moment the cursor entered the gap between the
button and the menu, making "Print -> Export" impossible to select.
Anchor the menu flush against the button (with a 2 px overlap) instead of
6 px below it, removing the dead-zone the cursor had to cross.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* Make preview slider labels draggable
Add label hit testing and delta-based dragging for the vertical preview slider labels. Keep label drags tied to the selected handle, prevent slider hover/timeline/menu handling from stealing label interactions, and keep value setters from changing the active selection implicitly.
* Refresh preview slider visuals
Update preview slider rails, handles, and labels for the refreshed light and dark theme appearance. Apply the same visual language to the horizontal slider, align single-layer and multi-layer labels, and remove obsolete triangle label geometry.
* Update the stealth mode description to reflect the current code changes in 2.4.
* disable HMS if bambu network plugin is not installed or in stealth mode
* fix build err
* add hide_login_side_panel to control whether to show login panel in home page
* fix: 409 conflicts resolution in notifications
* fix: silently log other http errors
* fix: pass force push flag to start_sync_user_preset
* remove formatting churn
* fix: propagate force push down put_setting
* refactor render_hyperlink_action to PopNotification for reuse
* fix an issue that hold status should be cleared before force pushing.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Support 'Default' filament option (index 0)
Treat filament index 0 as the new "Default" (use active object/part filament) instead of using 1. Update config defaults and tooltips for wall/sparse/solid infill filament options (min/default -> 0, tooltip explains "Default"). Adjust normalization and propagation logic to respect explicit feature overrides and only apply base extruder when feature values are zero; only copy sparse->solid infill when sparse > 0. Introduce FeatureFilamentOverrideMask and clamp_feature_filament_to_valid to resolve and clamp feature filaments. Update UI lists and selection behavior to expose a "Default" entry and handle zero-based indices in PartPlate and Plater.
* enable_filament_for_features option
Co-Authored-By: LixNix <105106115+lixnix@users.noreply.github.com>
* \n
* Allow wipe_tower_filament to equal nozzle count
Relax the assertion in Print::extruders to permit wipe_tower_filament == config().nozzle_diameter.size(). The configuration value is 1-based and the code subtracts 1 when pushing the extruder index, so equality should be valid and selecting the last nozzle should not trigger an assertion.
* Revert "Allow wipe_tower_filament to equal nozzle count"
This reverts commit 2c976574327a8bcdc74a1b296bf1aaff7752a94e.
* Revert "enable_filament_for_features option"
This reverts commit 01c13baeddb8e26793f752deab788ee4d086975b.
* Migrate legacy feature filament defaults
Add migration logic to convert legacy feature filament selections from 1 to 0 for older 3mf files. Introduces a local migrate_legacy_feature_filament_defaults lambda in src/OrcaSlicer.cpp and src/slic3r/GUI/Plater.cpp that scans keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) on configs/objects/volumes, updates values, counts conversions and logs the result. Also adds a Semver check for "2.4.0-dev" in OrcaSlicer to trigger the migration for files older than that version. This preserves expected default filament selections when loading older project files.
* Update OrcaSlicer.cpp
* Extract migration helper to ConfigMigrations
Centralize legacy feature-filament default migration by moving the duplicated lambda into ConfigMigrations::migrate_legacy_feature_filament_defaults (src/libslic3r/Config.cpp) and declaring it in Config.hpp. Update OrcaSlicer.cpp and slic3r/GUI/Plater.cpp to call the new function instead of inline lambdas. The helper converts specific feature filament keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) from int 1 to 0 and returns the count of conversions to avoid duplicated migration logic.
* Remove DynamicFilamentList1Based and consolidate lists
Delete the specialized DynamicFilamentList1Based struct and its global instance. Update Choice registrations to use the single dynamic_filament_list for wall, sparse_infill and solid_infill filaments, and remove the extra update call for the removed instance. This consolidates filament choice handling and removes duplicated logic in Plater.cpp.
* move it
* fix objects
* Update Config.hpp
* Update profiles
* fix(ElegooLink): pass printer SN to CC2 device panel URL
The CC2 panel subscribes to MQTT topics keyed by the printer serial number.
Without sn= in the URL it uses a wrong hardcoded fallback SN, subscribes to
the wrong topics, and shows Offline permanently even though the printer is
reachable.
- Cache the SN in elegoo_cc2_test() (already fetches it, was discarding it)
- Look up cache in get_print_host_webui(); fall back to a short LAN HTTP
call on first use before the test has run
- Append sn= to the panel URL
- Clear the wrong hardcoded fallback SN/IP from the panel bundle
- Add a small synchronous boot script to the panel that fetches the SN
from the printer before the bundle reads URLSearchParams, as a fallback
for unpatched binaries
* fix(ElegooLink): persist CC2 serial number in AppConfig dev_sn section
Store the printer SN under [dev_sn] keyed by normalized print_host after
a successful connection test or system/info fetch. Reuse it on later
sessions before hitting the network, matching how access_code is keyed by
dev_id for other LAN printers.
* fix(ElegooLink): answer get_sn IPC instantly from dev_sn cache
The CC2 panel always calls get_sn with a 10s timeout. Remove the HTTP
fallback from get_sn() and resolve IPC from dev_sn/memory only so Device
tab load is not blocked after sn= is already in the URL.
* fix(ElegooLink): skip get_sn IPC when URL already has sn
The CC2 device panel calls get_sn with a 10s timeout on every MQTT
connect even when Orca passes sn= in the query string. Use the URL
serial immediately and only fall back to IPC when it is missing.
* refactor(ElegooLink): resolve CC2 SN via PrintHost::get_sn in GUI
Drop the ElegooLink.hpp include from PrinterWebViewHandler; the webview
IPC handler uses the existing PrintHost virtual instead. Keep CC2 serial
lookup helpers file-local in ElegooLink.cpp and share them between
get_sn() and get_print_host_webui().
* chore: drop redundant <memory> include in PrinterWebViewHandler
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Wire the existing disassociate_url path into the Associate-tab
checkbox so users can revert prusaslicer/bambustudio/cura
registrations they previously enabled.
When the OrcaSlicer window is on an inactive Hyprland (or any Wayland
compositor that keeps surfaces mapped while hidden) workspace, GTK
keeps delivering synthetic leave-notify events to the printer-preset
row. The wxEVT_LEAVE_WINDOW handler at Plater.cpp:1855 calls
wxFindWindowAtPoint(), which walks the entire wxWidgets window tree
calling IsShown() / gtk_widget_get_child_visible() on each widget,
then Hide()s the edit button and triggers a Layout() of the parent
panel. The Hide()+Layout() re-fires more leave events, creating a
feedback loop that pegs a CPU core at 100% indefinitely.
GDB attached to a frozen process confirmed the main thread stuck in:
wxFindWindowAtPoint (recursing through widget tree)
-> wxWindow::IsShown
-> gtk_widget_get_child_visible
...
Sidebar::Sidebar(Plater*)::$_14 <- the leave handler lambda
wxEvtHandler::SafelyProcessEvent
wxGTKImpl::WindowLeaveCallback
gtk_main_do_event
...
IsShownOnScreen() can't be used as a guard here because GTK on Wayland
reports widgets as visible even when the toplevel surface is on an
inactive workspace (see existing comment at Plater.cpp:9304).
Fix: state-based short-circuit. If btn_edit_printer is already hidden,
the handler has no transition to perform - skip the expensive tree walk
and the Hide()+Layout() that would re-trigger the feedback loop. After
the first leave event, every subsequent leave event is O(1).
Refs:
- #12387 (open issue with matching setup: Arch + Hyprland + RTX 3060 + Bambu A1)
- #11196 (introduced the hover-edit-button feature in Nov 2025)
* Update/add re:3D profiles.
* Fix encoding issue with UTF-8 BOM
* Change spaces to tabs.
* Fix alignment-based space indentation issues.
* Test: rename_from property
* Test 2: rename_from property
* Test 3: use 'renamed' instead of 'rename'
* Add renamed property for each conflicting profile.
* Revert to optimized assets improved on [#13149](https://github.com/OrcaSlicer/OrcaSlicer/pull/13149)
# Description
Resolves https://github.com/OrcaSlicer/OrcaSlicer/issues/13830
The issue was that when OrcaSlicer was open with a 3mf file, the project
is first loaded, then when the sync finishes, it overrides the project
settings. This occurs when are working on a 3mf file and you click the
sync presets button as well.
The fix was to snapshot the current state of the settings, and then
restore whatever was marked as dirty to it's original state, preserving
the 3mf project settings.
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* Add Flashforge AD5X local send dialog, IFS mapping, and LAN discovery
* Refine Flashforge AD5X IFS dialog behavior
* Refine Flashforge IFS slot selection dialog
* Fix Flashforge printer selection and print mapping
* Use 3MF for Flashforge local uploads
* Generalize Flashforge local API handling
* Handle Flashforge local API IFS support more robustly
* Use selected plate filament info for Flashforge IFS mapping
* Fix Flashforge current-plate mapping and widget sizing
* Improve Flashforge IFS contrast and color matching
* Fix Flashforge legacy plate export and upload naming
Resolve PLATE_CURRENT_IDX before the legacy send-to-printhost path calls send_gcode so single-plate Flashforge 3MF exports target the selected plate instead of leaking the sentinel into export_3mf.
Sanitize Flashforge upload names in one shared utility reused by both the dialog and the backend client. This keeps the UI-visible filename and the actual uploaded filename consistent and replaces printer-problematic characters such as '=' without scattering Flashforge-specific logic through the generic Plater flow.
* Keep Flashforge upload filename sanitization in the backend only
Drop the PrintHostSendDialog API changes and keep filename sanitization inside the Flashforge backend paths that actually talk to the printer. This keeps the generic send dialog flow untouched while still normalizing problematic upload names for both serial and local API uploads.
* Only use the Flashforge IFS dialog for local API uploads
* Use reported Flashforge IFS support without model fallback
* Remove unused Flashforge slot uniqueness tracking
* Include <array> for Flashforge discovery message
Fix nozzle diameter guards for printers that don't report nozzle info (#13236)
PR #12814 changed DevNozzle::m_diameter default from 0.4f to 0.0f to
mean "unknown" when firmware doesn't push nozzle info, and guarded two
call sites in SelectMachine.cpp. PR #13330 introduced
DevExtderSystem::NozzleDiameterMatchesOrUnknown() and adopted it in
get_printer_preset / CalibUtils / CalibrationWizardPresetPage. A few
reachable sites were still left out and now report "mismatch" / fail
silently for every non-BBL printer (Klipper/Moonraker, RRF, Marlin,
etc.) that doesn't push BBL nozzle data.
The most visible symptom: the "Sync filament colors from AMS" button on
Moonraker printers with AMS/AFC silently does nothing, because
get_printer_preset() couldn't find a matching system preset (fixed in
#13330, but the lookup-string sites below kept the bug visible
elsewhere).
Apply NozzleDiameterMatchesOrUnknown at the two remaining comparison
sites:
src/slic3r/GUI/Plater.cpp
- file-load printer-mismatch dialog — don't prompt on every load
- on_select_preset sync_extruder_list gate — skip 0.0 extruders
For the three filament-lookup string-builder sites, fall back to the
currently-selected printer preset's nozzle diameter so the dropdown
isn't empty when firmware hasn't reported a diameter:
src/slic3r/GUI/AMSMaterialsSetting.cpp (Popup + on_select_filament)
src/slic3r/GUI/CaliHistoryDialog.cpp (get_all_filaments)
Also remove the dead SyncAmsInfoDialog::is_same_nozzle_diameters method
surfaced while auditing the affected sites — it was introduced
2024-12-30 in commit ad79ed6d93 ("ENH:add SyncAmsInfoDialog",
cherry-picked from Bambu's internal branch) but a caller was never
wired up on the OrcaSlicer side. Dead since introduction.
Fixes#13236
Refs #12814#13330
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fix overhang preview not using fallbacks when angle is 0
The overhang visualization in Preview ("show overhangs based on support settings")
used the raw `support_threshold_angle` value from the configuration.
When `support_threshold_angle` was set to 0, Orca internally falls back to:
- 30° for tree supports
- an angle derived from `support_threshold_overlap` for normal supports
However, the preview logic ignored these fallbacks and used the raw value (0°),
leading to incorrect overhang highlighting that did not match the actual
support generation behavior.
This patch computes the effective overhang threshold used for preview:
• If `support_threshold_angle > 0`, use it directly
• If `support_threshold_angle == 0` and tree supports are used, fall back to 30°
• If `support_threshold_angle == 0` and normal supports are used, derive the
equivalent angle from `support_threshold_overlap`, `layer_height`, and the
external perimeter width.
The function now returns `normal_z` directly so the preview uses the same
effective slope threshold as the support generator.
As a result, the overhang highlight in Preview now correctly matches the
supports that will actually be generated.
* Apply Copilot suggestions
After pulling the latest presets from the cloud, changed values such as Layer height kept showing the old value until the user switched tabs. Refresh the active settings tab on sync so updates appear immediately.
* feat(viewer): Display travel distance and move count in G-code summary
This commit introduces a new feature that enhances the G-code viewer by displaying the total travel distance and the total number of travel moves in the 'Line Type' summary.
This provides users with more detailed statistics about their prints, helping them to better understand the printer's behavior and identify opportunities to optimize travel moves for faster print times.
This commit also fixes a critical bug in the G-code processor where the travel distance was being calculated incorrectly. The distance variable was not being updated for non-extruding travel moves, leading to inaccurate statistics. The calculation has been corrected to ensure it is performed for all relevant move types, resulting in accurate travel distance reporting.
* Subfix segments
kilo mega giga tera peta exa
* Add missing values
* Grams to Kilos and tons
* add distance
* Fix tool view
* Record and display seam distances
Track seam-related distances in print statistics and show them in the GCode viewer. Added total_seam_gap_distance and total_seam_scarf_distance to PrintEstimatedStatistics (with initialization). In GCode::extrude_loop the code now computes seam gap and scarf distances and accumulates them for external perimeters. GCodeViewer uses the summed seam distance when the Seams option is selected in the legend.
* Fix travel / wipe distances
* Update GCode.cpp
* Filament changes estimated time
---------
Co-authored-by: Steve Scargall <37674041+sscargal@users.noreply.github.com>
Handle user_ticket_login
Legacy Bambu network plugins completed embedded login with
user_login, which the WebView dialog already handled.
Newer Bambu login flows can complete with user_ticket_login and
return only a short-lived ticket. The external browser path already
worked because the local HTTP callback server exchanges that ticket
for tokens, fetches the user profile, and passes the resulting session
payload to change_user.
Mirror that ticket exchange path for embedded WebView login so the
dialog can handle user_ticket_login instead of silently ignoring it
after verification-code submission.
