Since the wxWidgets 3.3 upgrade the Slice/Print split-button's transient
popup was dismissed the moment the cursor entered the gap between the
button and the menu, making "Print -> Export" impossible to select.
Anchor the menu flush against the button (with a 2 px overlap) instead of
6 px below it, removing the dead-zone the cursor had to cross.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* Preserve support base outline/fill order
Honor no_sort when emitting support toolpaths to keep outline-first order.
Group tree support base paths (including lightning) into per-area no_sort collections to prevent interleaving across islands.
Keep lightning layer lookup side-effect free.
* Tag Orca specific changes
Tag Orca specific changes vs. Bambu using the comment //ORCA: . This helps when reviewing merge commits from upstream Bambu so we don't end up causing regressions when pulling in commits from upstream
* Fix: Disable redundant toolchange retraction for Elegoo Centauri Carbon
Sets `retract_length_toolchange` to 0 in the Elegoo Centauri Carbon (ECC) machine profile.
This resolves an issue where a massive filament blob would form on the prime tower immediately after resuming a manual filament change (M600). The blob was caused by a conflict between OrcaSlicer's default toolchange logic and Elegoo's hardcoded firmware behavior:
- Elegoo's firmware (specifically the `cmd_PAUSE` and `cmd_RESUME` sequences) completely takes over pressure management during an M600. It performs its own initial 2mm retraction, a 120mm purge, and a silicone brush wipe, returning the print head to the prime tower perfectly primed.
- Previously, Slicer was unaware of the firmware's priming and would issue a redundant 2mm un-retract (`G1 E2`) upon resume. Forcing 2mm of filament out of an already-full nozzle created the blob.
By disabling the toolchange retraction (`0`), Slicer correctly hands off filament pressure management during an M600 entirely to the Elegoo firmware, preventing double-retractions and eliminating the blob.
* fix errors after merging main
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Make preview slider labels draggable
Add label hit testing and delta-based dragging for the vertical preview slider labels. Keep label drags tied to the selected handle, prevent slider hover/timeline/menu handling from stealing label interactions, and keep value setters from changing the active selection implicitly.
* Refresh preview slider visuals
Update preview slider rails, handles, and labels for the refreshed light and dark theme appearance. Apply the same visual language to the horizontal slider, align single-layer and multi-layer labels, and remove obsolete triangle label geometry.
* Update the stealth mode description to reflect the current code changes in 2.4.
* disable HMS if bambu network plugin is not installed or in stealth mode
* fix build err
* add hide_login_side_panel to control whether to show login panel in home page
* fix: 409 conflicts resolution in notifications
* fix: silently log other http errors
* fix: pass force push flag to start_sync_user_preset
* remove formatting churn
* fix: propagate force push down put_setting
* refactor render_hyperlink_action to PopNotification for reuse
* fix an issue that hold status should be cleared before force pushing.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fix air filtration gcode emitted even if not not supported
- do not emit air filtration gcode if not supported by the printer
- removed redundant "add_eol" parameter from "set_exhaust_fan()" function
* Support 'Default' filament option (index 0)
Treat filament index 0 as the new "Default" (use active object/part filament) instead of using 1. Update config defaults and tooltips for wall/sparse/solid infill filament options (min/default -> 0, tooltip explains "Default"). Adjust normalization and propagation logic to respect explicit feature overrides and only apply base extruder when feature values are zero; only copy sparse->solid infill when sparse > 0. Introduce FeatureFilamentOverrideMask and clamp_feature_filament_to_valid to resolve and clamp feature filaments. Update UI lists and selection behavior to expose a "Default" entry and handle zero-based indices in PartPlate and Plater.
* enable_filament_for_features option
Co-Authored-By: LixNix <105106115+lixnix@users.noreply.github.com>
* \n
* Allow wipe_tower_filament to equal nozzle count
Relax the assertion in Print::extruders to permit wipe_tower_filament == config().nozzle_diameter.size(). The configuration value is 1-based and the code subtracts 1 when pushing the extruder index, so equality should be valid and selecting the last nozzle should not trigger an assertion.
* Revert "Allow wipe_tower_filament to equal nozzle count"
This reverts commit 2c976574327a8bcdc74a1b296bf1aaff7752a94e.
* Revert "enable_filament_for_features option"
This reverts commit 01c13baeddb8e26793f752deab788ee4d086975b.
* Migrate legacy feature filament defaults
Add migration logic to convert legacy feature filament selections from 1 to 0 for older 3mf files. Introduces a local migrate_legacy_feature_filament_defaults lambda in src/OrcaSlicer.cpp and src/slic3r/GUI/Plater.cpp that scans keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) on configs/objects/volumes, updates values, counts conversions and logs the result. Also adds a Semver check for "2.4.0-dev" in OrcaSlicer to trigger the migration for files older than that version. This preserves expected default filament selections when loading older project files.
* Update OrcaSlicer.cpp
* Extract migration helper to ConfigMigrations
Centralize legacy feature-filament default migration by moving the duplicated lambda into ConfigMigrations::migrate_legacy_feature_filament_defaults (src/libslic3r/Config.cpp) and declaring it in Config.hpp. Update OrcaSlicer.cpp and slic3r/GUI/Plater.cpp to call the new function instead of inline lambdas. The helper converts specific feature filament keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) from int 1 to 0 and returns the count of conversions to avoid duplicated migration logic.
* Remove DynamicFilamentList1Based and consolidate lists
Delete the specialized DynamicFilamentList1Based struct and its global instance. Update Choice registrations to use the single dynamic_filament_list for wall, sparse_infill and solid_infill filaments, and remove the extra update call for the removed instance. This consolidates filament choice handling and removes duplicated logic in Plater.cpp.
* move it
* fix objects
* Update Config.hpp
* Update profiles
* fix: restore version placeholder in custom G-code
PlaceholderParser sets "version" in its constructor, but Print::apply() calls clear_config() which wipes it. Unlike timestamp/user (restored during G-code export), version was never restored, so [version]/{version} threw "Variable does not exist" in custom G-code while working in output filenames.
Re-set version after both clear_config() calls so it resolves everywhere.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix: resolve timestamp and user placeholders in File header G-code
file_start_gcode is processed via print.placeholder_parser() directly, before the G-code parser integration copy that restores timestamp/user. As a result {timestamp}, {year}..{second} and {user} threw "Variable does not exist" in the File header G-code field while working in Machine start/end G-code.
Inject fresh timestamp and user into the file_start_gcode config so they resolve, matching the other custom G-code fields.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix: expose initial_extruder and extruded_*_total placeholders in output filenames
PrintStatistics exposed initial_tool (not its documented alias initial_extruder) and total_weight/extruded_volume (not the documented extruded_weight_total/extruded_volume_total). Filename formats using the missing names failed with "not a variable name".
Add the missing aliases to PrintStatistics::config() and placeholders().
Fixes#12436Fixes#10708
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix: populate total_toolchanges without a wipe tower
total_toolchanges is documented as available while change_filament_gcode (and the wipe-tower toolchange flow) is evaluated, but it was sourced only from WipeTowerData::number_of_toolchanges, which stays -1 (clamped to 0) when no wipe tower is generated. Manual filament swaps and toolchanger/IDEX setups without a wipe tower therefore always saw total_toolchanges = 0 in custom G-code and output filenames, despite real tool changes occurring -- breaking the placeholder's documented contract.
Add a tool-ordering fallback: when number_of_toolchanges < 0, count tool changes from the print's tool ordering (the transitions in the per-layer extruder sequence). Wipe-tower prints are untouched -- number_of_toolchanges >= 0 still wins -- so their reported count does not change.
Limitation: sequential (by-object) prints without a wipe tower leave Print::tool_ordering() empty, so total_toolchanges stays 0 there (unchanged from before).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(ElegooLink): pass printer SN to CC2 device panel URL
The CC2 panel subscribes to MQTT topics keyed by the printer serial number.
Without sn= in the URL it uses a wrong hardcoded fallback SN, subscribes to
the wrong topics, and shows Offline permanently even though the printer is
reachable.
- Cache the SN in elegoo_cc2_test() (already fetches it, was discarding it)
- Look up cache in get_print_host_webui(); fall back to a short LAN HTTP
call on first use before the test has run
- Append sn= to the panel URL
- Clear the wrong hardcoded fallback SN/IP from the panel bundle
- Add a small synchronous boot script to the panel that fetches the SN
from the printer before the bundle reads URLSearchParams, as a fallback
for unpatched binaries
* fix(ElegooLink): persist CC2 serial number in AppConfig dev_sn section
Store the printer SN under [dev_sn] keyed by normalized print_host after
a successful connection test or system/info fetch. Reuse it on later
sessions before hitting the network, matching how access_code is keyed by
dev_id for other LAN printers.
* fix(ElegooLink): answer get_sn IPC instantly from dev_sn cache
The CC2 panel always calls get_sn with a 10s timeout. Remove the HTTP
fallback from get_sn() and resolve IPC from dev_sn/memory only so Device
tab load is not blocked after sn= is already in the URL.
* fix(ElegooLink): skip get_sn IPC when URL already has sn
The CC2 device panel calls get_sn with a 10s timeout on every MQTT
connect even when Orca passes sn= in the query string. Use the URL
serial immediately and only fall back to IPC when it is missing.
* refactor(ElegooLink): resolve CC2 SN via PrintHost::get_sn in GUI
Drop the ElegooLink.hpp include from PrinterWebViewHandler; the webview
IPC handler uses the existing PrintHost virtual instead. Keep CC2 serial
lookup helpers file-local in ElegooLink.cpp and share them between
get_sn() and get_print_host_webui().
* chore: drop redundant <memory> include in PrinterWebViewHandler
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Wire the existing disassociate_url path into the Associate-tab
checkbox so users can revert prusaslicer/bambustudio/cura
registrations they previously enabled.
When the OrcaSlicer window is on an inactive Hyprland (or any Wayland
compositor that keeps surfaces mapped while hidden) workspace, GTK
keeps delivering synthetic leave-notify events to the printer-preset
row. The wxEVT_LEAVE_WINDOW handler at Plater.cpp:1855 calls
wxFindWindowAtPoint(), which walks the entire wxWidgets window tree
calling IsShown() / gtk_widget_get_child_visible() on each widget,
then Hide()s the edit button and triggers a Layout() of the parent
panel. The Hide()+Layout() re-fires more leave events, creating a
feedback loop that pegs a CPU core at 100% indefinitely.
GDB attached to a frozen process confirmed the main thread stuck in:
wxFindWindowAtPoint (recursing through widget tree)
-> wxWindow::IsShown
-> gtk_widget_get_child_visible
...
Sidebar::Sidebar(Plater*)::$_14 <- the leave handler lambda
wxEvtHandler::SafelyProcessEvent
wxGTKImpl::WindowLeaveCallback
gtk_main_do_event
...
IsShownOnScreen() can't be used as a guard here because GTK on Wayland
reports widgets as visible even when the toplevel surface is on an
inactive workspace (see existing comment at Plater.cpp:9304).
Fix: state-based short-circuit. If btn_edit_printer is already hidden,
the handler has no transition to perform - skip the expensive tree walk
and the Hide()+Layout() that would re-trigger the feedback loop. After
the first leave event, every subsequent leave event is O(1).
Refs:
- #12387 (open issue with matching setup: Arch + Hyprland + RTX 3060 + Bambu A1)
- #11196 (introduced the hover-edit-button feature in Nov 2025)
* Update/add re:3D profiles.
* Fix encoding issue with UTF-8 BOM
* Change spaces to tabs.
* Fix alignment-based space indentation issues.
* Test: rename_from property
* Test 2: rename_from property
* Test 3: use 'renamed' instead of 'rename'
* Add renamed property for each conflicting profile.
* Revert to optimized assets improved on [#13149](https://github.com/OrcaSlicer/OrcaSlicer/pull/13149)
