when enter "merge result" in cali page
jira: STUDIO-10409
Change-Id: I03c49306342cda9b9c305b188201ec6f5b6ab1f1
(cherry picked from commit 75ab432b124dad3a3d66e3a6a069c8543cf8e0b6)
and fix the nozzlechange's error cleanbox.
and fix some error in interface's nozzlechangle and toolchange.
jira: none
Change-Id: I2fd5c68d90506fcb8f01f09a8246dfb5838baef4
(cherry picked from commit 6c5b63db246a1f42e34225c5561fb8b0975da53b)
and reduce the toolchange speed if it occurs at the contact surface
jira: none
Change-Id: Ic238671366145bc7bff76d18d20c104a201a1f17
(cherry picked from commit fb9f9f41e618c5064032b85351363029307e209c)
when switch printer, we found some filament preset not visible
and we need to allow it to be selected
jira: STUDIO-9979
Change-Id: I9613747a755f449c2f48563082b6893e426f37ea
(cherry picked from commit bc5514bbabbbaddefb33ade556a0f15c051aed7e)
1. Try to merge filaments before grouping
2. Set max match num for machine filamnet in match mode
jira:STUDIO-10392
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2451d838e07ee02f493fda4dc702f3d13b2ad37b
(cherry picked from commit d15fc37ff2fa048e38a0b132bb3ae525ff666fab)
1. In slice plate mode,force use plate mode
2. In slice all mode, force use global mode
jira:STUDIO-10390
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3edb559043fdc52339b7f611643b8f5ac116571d
(cherry picked from commit f042c817a7ed21b4b18915e2a649aed733a80f48)
and set the contact surfaces of different material types as solid,
and reduce the nozzlechange speed if it occurs at the contact surface,
and recuce the toolchange speed if it occurs at the contact surface.
jira: none
Change-Id: I884d60f4114544dfa959bd654ecc985f5fb9aac4
(cherry picked from commit ed7bfd3ff6732efe6c7e9eb96901be1db00bb3d0)
In the original logic, the gcodeEditor did not parse gcode lines with
leading spaces. In recent changes, all leading spaces in gcode lines
were removed, causing all gcode to be parsed. However, some certain cmd
perform additional actions, leading to incorrect state recording. As a
result, based on the erroneous state, some gcode lines that should not
be deleted are being removed.
This logic needs to be optimized in the future.
jira:10357,10367
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If34b9c3b2913768b824030685e0a36708ca3a5ca
(cherry picked from commit 16813aa46092343c70681f3145a4f402ff415042)
1. the nozzle change gcode use double perimeter width
2. fix the error layer height for adaptive layer height
3. limit the nozzle change speed to 50 when a bridge is detected
4. fix the error extrusion flow for filament change gcode when a bridge is detected
jira: STUDIO-10269
Change-Id: I580c618555fe19d000a56e2510a42004722c1b8b
(cherry picked from commit 5c56b43166ab32b09da31b7046efbbcbe3cbc9c8)
from mulit-extruder to single-extruder
jira: none
Change-Id: I0fc00a279dbc7f5d6b1fb6df5556375bfb95782e
(cherry picked from commit 01075411dc81c8d7c34551525f93fecd8829a3c5)
1. Add filament_is_support field. Format the filament type
2. Optimize machine filament info logic
jira:STUDIO-10326
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia8bfc37095339e73c98209b4e3f1e0804e511e88
(cherry picked from commit 001144400b841629439a890d46fa40a7296689ba)
