* Actually build tests on Linux and allow RelWithDebInfo
They weren't being built.
Also cleaned up --config flags which enables RelWithDebInfo on Linux,
now that Ninja Multi-Config is used, it's quite trivial.
* Remove obsolete Slic3r Perl tests
The directory doesn't exist, they're already gone.
* Add GH job for running unit tests
* Move unit test execution to script and upload test results
* Don't run scheduled builds on forks
* Only deploy from SoftFever/OrcaSlicer
Will stop failures on forks
* Use artifact instead of cache
* Tweak archive and checkout paths
Keep getting error:
```
/home/runner/work/_temp/902d0a0a-6d23-4fe0-a643-8b5cc4efd25b.sh: line 1: scripts/run_unit_tests.sh: Permission denied
```
That seems to be because I didn't use actions/checkout, the working
directory is never setup correctly? So using checkout to get scripts
directory. Unsure if archive will preserve the `build/tests/` prefix;
will find out soon.
* Use tar to package directory and write results to correct directory
Tar preserves filenames and directory structure
* Use tar -xvf not -xzf
Muscle memory failed me
* Add testing wiki page
* Save test logs on failure and choose correct directory for junit
* Consolidate apt install steps, use for unit tests too, disable non-Linux builds
Temporarily disable non-Linux builds to save time while developing
this.
Cache the apt packages to save some time searching apt and downloading
them again (though I realize this is also downloading, but hopefully
by something closer and faster).
Remove all the redundant packages listed in the workflow and debian
distribution lists.
* Remove apt install steps from workflow
`./build-linux.sh -u` is supposed to install all needed packages, so
it should build without needing anything besides that. If I'm wrong
this commit will be dropped.
* Need composite action checked out locally
* Re-enable non-Linux builds now that it's working
* Skip a deploy and a notarize in forks
They only succeed in the main repo.
* Fix multi-build for non-Release builds: share CONFIG
* Correct build errors in unit tests
Indeterminate method signatures resolved. Updated script to build all
the tests.
* Fix -g vs -e for RelWithDebInfo
* Change CONFIG->BUILD_CONFIG
Missed one in prior commits
* Reduce wasteful redundant build artifact copies
1. Don't copy the artifacts and leave them; make a hard link first;
only make a copy only while creating AppImage.
2. Don't tar up the `package` directory; nothing uses this tar AFAICT
* Fix directory name
* Change jigsaw auth test URLs to httpbin.org
No idea why the basic auth doesn't work, but it doesn't work for
`curl` CLI either. This does.
* Remove force-build
It got reverted at
e3f049829b
for unknown reasons.
* Add timeout for unit tests in GitHub Actions workflow (#11146)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add option to allow upload to SD-Cards marked as abnormal, also add better error description
+ Adds the options under the Network Settings to allow upload to abnormal SD-Card.
+ If not enabled user will now see why the upload is stuck at 10% depending on the sd_card_state (Readonly/Abnormal)
* Merging with current branch, and updateing "sd-card" to "storage"
* Generate localization and also change remaining sd_card_abnormal states to _storage_abnormal
* Fix issues from merge, and other bugfixes.
* Regenerate localization files.
* Improve Missing Storage Message, Add skip for abnormal storage in printer select dialog
* Add "Replace all from STL" command
this operates on the currently selected plate or on the selection
* Add more translations for "Replace all from STL"
* build fix
* "Replace all with STL" also works with multiple selected plates
* fix build
* replace all from stl: better error handling and a nicer status message box
---------
Co-authored-by: Nils Hasler <hasler@thecaptury.com>
Fix: Fixing the logic of the adaptive layer height for supports
Removing `tree_support_adaptive_layer_height` because its logic duplicates `independent_support_layer_height`
* Introduced a new command-line argument `--vendor` to process images from a specific vendor subfolder.
* Enhanced error handling to check for the existence of the vendor path and list available vendors if the path does not exist.
* Updated help documentation to reflect the new functionality.
This change improves the script's usability for users managing multiple vendor-specific cover images.
* Auto generate CMAKE_PREFIX_PATH/DESTDIR
* Auto set CMAKE_INSTALL_PREFIX
* Always default SLIC3R_STATIC to on
* Only allow one value for CMAKE_OSX_ARCHITECTURES
* Set arch for OpenSSL from CMAKE_OSX_ARCHITECTURES
* Set CMAKE_INSTALL_RPATH from CMAKE_PREFIX_PATH
* Default CMAKE_MACOSX_RPATH and CMAKE_MACOSX_BUNDLE to on
* Auto set BBL_RELEASE_TO_PUBLIC based on build config
* Default to GTK 3
* Fix linux debug build
Update find modules to also look for the debug variant of the libraries
* Set DEP_DEBUG and ORCA_INCLUDE_DEBUG_INFO based on CMAKE_BUILD_TYPE
* Add a fallback value for Windows SDK if the env variables are not set
* Reflect CMake changes in the build scripts
* Add missing line
* Fix auto setting DEP_DEBUG and ORCA_INCLUDE_DEBUG_INFO
* Update dep folder name for linux in GH actions
* Invert dep-folder-name conditions
`''` is considered a falsy value, which was causing the value to always be set to 'OrcaSlicer_dep'
* Properly handle finding the debug version of libnoise
* Convert FindNLopt.cmake to a config mode wrapper
* Use separate build directory for debug builds on Linux
* Move find_package for libnoise
* Cleanup and improve linux build script
- Add dry run
- Add build in RelWithDebInfo
- Add function to print and run commands
* Remove linux destdir deprecation and cleanup
* Fix flatpak build
* Disable fail fast for flatpak builds
* Flatpak improvements
- Build wxWidgets using deps cmake
- Improve handling of space freeing commands while building deps
- Allow cmake to directly download deps
- Set needed flags within cmake instead of the build manifest
* Print clean build commands
* Implement shellcheck recommendations
* Cleanup
* Fix CMakeLists.txt syntax by replacing empty elseif with else statement
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Updated multiple filament profiles to convert fields such as filament_cost, filament_density, and filament_max_volumetric_speed from single values to arrays for consistency. Removed unnecessary fields from filament profiles to streamline data structure. This change enhances compatibility with the updated profile handling logic in the orca_filament_lib.py script.
* The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed
* Revert "The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed"
This reverts commit 8d296720b8de58b1bfa4f008a24cee841a8472c6.
* Update Qidi Q2 0.4 nozzle.json
修改Q2打印高度
* change machine_gcode
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add Vietnamese localization file for OrcaSlicer
* add Vietnamese po file
* Add Vietnamese language support in GUI (#11000)
- Added Vietnamese (vi_VN) to the language mapping in GUI_App.cpp.
- Updated Preferences.cpp to include Vietnamese in the language combobox and display its name in Vietnamese (Tiếng Việt).
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
# Change FillTpmsFK.cpp to use MarchingSquares.hpp.
This is still a work in progress, but it does seem to work fine, and I
thought I'd put this up there for people to have a play with. I also
have a few questions because I'm not 100% familiar with the rest of the
codebase and I'm going to use the review of this to figure a few things
out.
This builds on #10747 which simplified and significantly optimized
MarchingSquares.hpp by replacing most of FillTpmsFK.cpp's implementation
to just use that marching squares implementation instead of
re-implementing it's own.
I don't yet have any solid speed comparisons but it feels a bit
subjectively faster, though I think that most of the delay in previewing
the slicing results is not in the fill-generation so it's a bit hard to
tell. I don't know if there are any tests/benchmarks/etc that I could
use for testing this, but I'm probably going to add some to this PR at
some point.
Even if this doesn't give a significant speed-up, it does significantly
simplify the code and make it easier to re-use for other equation based
fill-patterns. This could re-implement gyroid or TpmsD with about 5
lines of C code to inherit from `ScalarField` and redefine the `float
get_scalar(coordf_t x, coordf_t y, coordf_t z)` function with the
appropriate equation.
I don't think it would be faster than the current gyroid or TpmsD fills
though, since they directly generate a single line using the equation
and then just copy and shift it. However, it might not be much slower
and it would simplify the code to do them all the same way.
But the main reason I'm doing this is this can be used to implement far
more complicated fills that can't really be implemented any other way.
In particular I'm working towards a gyroid fill that dynamically varies
it's density based on how close it is to the walls.
I have a bunch of questions about some of the other bits that I'll post
as comments against the review-diff.
# Screenshots/Recordings/Graphs
I'll add some when I get there... but so far the results look identical
to the previous implementation even when I zoom in close.
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
Ported part skip from BambuStudio. Thanks bambulab!
<img width="1350" height="902" alt="image"
src="https://github.com/user-attachments/assets/d7f89950-3420-4ea5-bbb6-e53c875e7422"
/>
Haven't fully tested yet!
### Minimum Firmware Requirements (from BambuStudio release page):
- **X1C**: v01.09.02.12 or later
- **H2D**: v01.02.00.00 or later
- **Other models**: Currently not supported. Feature support coming in
future firmware updates.
> ⚠️ Make sure your printer firmware is up to date to use this feature.
This new feature allows users to override flow ratios for the following extrusion path types:
* First layer (excluding Brims and Skirts)
* Outer walls
* Inner walls
* Overhang perimeters
* Sparse infill
* Internal solid infill
* Gap fill
* Support
* Support interfaces
Fixes#11082
Slicing is going to the endless loop when the `Base pattern spacing` value is 0 for `Tree Slim` support.
Co-authored-by: SoftFever <softfeverever@gmail.com>
