Fix crash in PA calibration pattern generation
Reset current extruder ID and clear pointers in set_extruders to prevent dangling pointers when extruders are recreated. Also fixed undefined behavior by checking if the vector is empty before taking max_element.
Co-authored-by: SoftFever <softfeverever@gmail.com>
## Summary
- Change default bed temperature type from "By First filament" to "By Highest Temp"
- Move `bed_temperature_formula` option from develop mode to advanced mode for better accessibility
- Relocate UI control from "Basic Information - Advanced" to "Multimaterial Setup" section where it's more relevant for multi-filament printing
Using the highest temperature of all printed filaments is generally safer for bed adhesion than using the first filament's temperature, especially in multi-material prints where different filaments may require different bed temperatures.
<img width="390" height="239" alt="Screenshot 2026-02-26 at 18 44 56" src="https://github.com/user-attachments/assets/0fe9f8c7-062a-4a7a-8ab3-c52df7e74b26" />
# Description
This PR enhances the GCodeProcessor's time estimation by incorporating Junction Deviation (JD) into the jerk calculations, providing more accurate print time predictions for firmwares that use JD (like modern Marlin).
Key Changes:
- Added JD support to time estimation
- Reads machine_max_junction_deviation (machine limits) and default_junction_deviation (print profile)
- When JD is enabled (>0), replaces traditional X/Y jerk values with JD-based calculation:
$Jerk = \sqrt{2.5\cdot JD \cdot acceleration }$
- Falls back to traditional jerk when JD is not used
# Test:
JD:0.0256mm Accel.: 1000 mm/s²
<img width="2560" height="1392" alt="image" src="https://github.com/user-attachments/assets/f0e95294-bfca-400e-bffc-8d615d051b70" />
Jerk: 8mm/s (equivalent)
<img width="2560" height="1392" alt="image" src="https://github.com/user-attachments/assets/8508727e-70f6-49ed-ac19-002db73e957b" />
JD:0.0128mm (4mm/s jerk)
<img width="2560" height="1392" alt="image" src="https://github.com/user-attachments/assets/91b04d3b-1b9e-48f4-b4b4-5addda2eff57" />
* Add Elegoo filament profiles to OrcaFilamentLibrary
Add 7 Elegoo filament profiles based on manufacturer specifications:
- Elegoo Rapid PETG (high-speed PETG, 240-270°C, 30-600mm/s)
- Elegoo PETG Pro (standard PETG, 230-260°C, 30-270mm/s)
- Elegoo PETG-CF (carbon fiber PETG, 240-270°C, 30-220mm/s)
- Elegoo PLA (standard PLA, 190-230°C, 30-280mm/s)
- Elegoo Rapid PLA+ (high-speed PLA, 190-230°C, 30-600mm/s)
- Elegoo ASA (ASA, 250-280°C, 30-270mm/s)
- Elegoo TPU 95A (flexible TPU, 220-240°C, 30-60mm/s)
All settings sourced from Elegoo's official product specifications.
* Fix dual seam fuzzy painted rev 2 (#11923)
* 2 seam fuzzy 2nd attempt
* Update FuzzySkin.cpp
* Fix debug SVG
* solve bump artifact in extrusion junction joint
* minor fixes
* cleaning
Update FuzzySkin.cpp
* Fix filament override changes not appearing in Unsaved Changes and showing as “Undef category” in preset comparison (#12298)
* Fix an issue that on Windows the Bambu legacy plugin is 01.10.01.09 (#12380)
* tweak legacy library migration from rename to copy in BBLNetworkPlugin (#12400)
* tweak legacy library migration from rename to copy in BBLNetworkPlugin
* Add Pressure Advance visualization support (#11673)
* Add Pressure Advance visualization support
Signed-off-by: minicx <minicx@disroot.org>
* Port Pressure Advance visualization to libvgcode architecture
Adapt PA visualization (originally in commit e3a77259) to work with
the new libvgcode library introduced by upstream PR #10735.
Changes across the libvgcode stack:
- PathVertex: add pressure_advance field
- Types.hpp: add PressureAdvance to EViewType enum
- ViewerImpl: add ColorRange, color mapping, range updates for PA
- LibVGCodeWrapper: pass pressure_advance from MoveVertex to PathVertex
GCodeViewer UI integration:
- Add "Pressure Advance" to view type dropdown
- Add PA color range in legend (3 decimal places)
- Add PA value display in sequential view marker tooltip
- Add PA row in position properties table
The GCodeProcessor PA parsing (M900, M572, SET_PRESSURE_ADVANCE)
is preserved from the original implementation.
* Tag Pressure Advance visualization changes with ORCA comments
Signed-off-by: minicx <minicx@disroot.org>
---------
Signed-off-by: minicx <minicx@disroot.org>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: Claude <noreply@anthropic.com>
* Fix time estimation using wrong machine limits due to broken extruder_id indexing (#12411)
The extruder_id*2 offset in get_axis_max_feedrate/get_axis_max_acceleration
was cherry-picked from BambuStudio's per-nozzle limit system, which OrcaSlicer
never ported. Without that system the limit arrays only have 2 values
([0]=Normal, [1]=Stealth), so any extruder_id > 0 or the uninitialized
value (255) would overshoot the array and fall back to values.back(),
always returning stealth-mode limits and producing incorrect time estimates.
Revert to indexing by time mode only (matching v2.3.1 behavior) and simplify
the M201/M203 handlers to write only the two mode slots they actually use.
* Fix machine envelope G-code emitting wrong limits due to broken extruder_id indexing (#12414)
print_machine_envelope() used get_extruder_id(extruder_id)*2 to index
machine limit arrays that only hold [Normal, Stealth] (2 entries).
For multi-extruder setups this went out-of-bounds, causing wrong M201/M203
values in the G-code which then override the estimator's correct limits.
Same class of bug as c6d1c11ebb but on the G-code writer side.
Changes:
- Remove unused extruder_id param from print_machine_envelope()
- Use .values.front() for M201/M203, matching M204/M205 in same function
- Change get_option_value() fallback from .back() to .front() so any
future out-of-bounds index returns Normal mode instead of Stealth
* update error message when plugin upgrade failed
* Add and update pt-BR translations (#12409)
* Add preference for filament area height to reduce scrolling while using 16+ filaments (#12317)
Fixes https://github.com/OrcaSlicer/OrcaSlicer/issues/12284
Adds a preference for filaments area height since every user has different amount of MM units and external filaments
so users can set a value that fits their setups this way
we might see 3 or 6 filaments for each unit on future. thats why i set value as int
used 10 as default value. its good for 2 multimaterial units ( 8 filaments ) and 1 external filament
min value is 8. might be good when no external filaments in use
max value is 99. UI works same as 2.3.1 version
<img width="562" height="122" alt="Screenshot-20260215194149" src="https://github.com/user-attachments/assets/309cec36-8b83-48f3-875f-d5f22a9631e7" />
**BEFORE**
Scrollable area fixed for 10 items. that causes a lot of scrolling whe user has 3 or 4 ams units
<img width="411" height="237" alt="Screenshot-20260215194816" src="https://github.com/user-attachments/assets/fc7823c0-d82a-4d1f-bb5b-56e8dd47abd2" />
**AFTER**
value 10. - 2 multimaterial units ( 8 filaments ) and 1 external filament
<img width="1002" height="250" alt="Screenshot-20260215195243" src="https://github.com/user-attachments/assets/e3238cd1-788e-4ed2-b048-89c63bd323db" />
value 18 - 4 multimaterial units ( 16 filaments ) and 1 external filament
<img width="1001" height="355" alt="Screenshot-20260215195127" src="https://github.com/user-attachments/assets/afe0305e-fcb4-4a51-b8dc-e70a063aa391" />
* Fix: Correct range checking for int and float Config Options + QoL changes in tooltips (#11915)
* Fix float number not working properly for option min/max (#11211)
* ConfigOptionDef: min/max values type are changed from INT to FLOAT.
(cherry picked from commit f277bc80c22e0c9a067481a4301922e2c96aed47)
* Fix infinite loop and crash when `fuzzy_skin_point_distance` = 0 (SoftFever/OrcaSlicer#11069)
* Fix Linux build issue
* Fix float comparison due to precision loss
* Fix: Range check added for coInt options; Ranges and defaults added in tooltips
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Update machine profile for OpenEYE Peacock V2 (#12333)
* OpenEYE Peacock V2 machine profile: Add printer_agent key to enable AMS filament synchronization (Klipper/Moonraker)
Signed-off-by: Sezgin AÇIKGÖZ <sezginacikgoz@mail.com>
* Optimize retraction settings in printer profiles to reduce stringing and improve print quality
Signed-off-by: Sezgin AÇIKGÖZ <sezginacikgoz@mail.com>
---------
Signed-off-by: Sezgin AÇIKGÖZ <sezginacikgoz@mail.com>
* Fix preheat regression bugs (#12438)
Fix preheat regression bugs
revert 769fc137c7
* Fix the issue where `resources/profiles/OrcaFilamentLibrary.json` is not updated accordingly.
---------
Signed-off-by: minicx <minicx@disroot.org>
Signed-off-by: Sezgin AÇIKGÖZ <sezginacikgoz@mail.com>
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
Co-authored-by: Kiss Lorand <50251547+kisslorand@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: minicx <39405619+loss-and-quick@users.noreply.github.com>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Alexandre Folle de Menezes <afmenez@terra.com.br>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: Valerii Bokhan <80919135+valerii-bokhan@users.noreply.github.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: Sezgin AÇIKGÖZ <sezginacikgoz@mail.com>
Added checks in ByLayer print sequence to handle ordering for Intra-layer ordering option. Prevents new ordering setup when "As object list" is enabled.
* Fix float number not working properly for option min/max (#11211)
* ConfigOptionDef: min/max values type are changed from INT to FLOAT.
(cherry picked from commit f277bc80c22e0c9a067481a4301922e2c96aed47)
* Fix infinite loop and crash when `fuzzy_skin_point_distance` = 0 (SoftFever/OrcaSlicer#11069)
* Fix Linux build issue
* Fix float comparison due to precision loss
* Fix: Range check added for coInt options; Ranges and defaults added in tooltips
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
print_machine_envelope() used get_extruder_id(extruder_id)*2 to index
machine limit arrays that only hold [Normal, Stealth] (2 entries).
For multi-extruder setups this went out-of-bounds, causing wrong M201/M203
values in the G-code which then override the estimator's correct limits.
Same class of bug as c6d1c11ebb but on the G-code writer side.
Changes:
- Remove unused extruder_id param from print_machine_envelope()
- Use .values.front() for M201/M203, matching M204/M205 in same function
- Change get_option_value() fallback from .back() to .front() so any
future out-of-bounds index returns Normal mode instead of Stealth
The extruder_id*2 offset in get_axis_max_feedrate/get_axis_max_acceleration
was cherry-picked from BambuStudio's per-nozzle limit system, which OrcaSlicer
never ported. Without that system the limit arrays only have 2 values
([0]=Normal, [1]=Stealth), so any extruder_id > 0 or the uninitialized
value (255) would overshoot the array and fall back to values.back(),
always returning stealth-mode limits and producing incorrect time estimates.
Revert to indexing by time mode only (matching v2.3.1 behavior) and simplify
the M201/M203 handlers to write only the two mode slots they actually use.
* Add Pressure Advance visualization support
Signed-off-by: minicx <minicx@disroot.org>
* Port Pressure Advance visualization to libvgcode architecture
Adapt PA visualization (originally in commit e3a77259) to work with
the new libvgcode library introduced by upstream PR #10735.
Changes across the libvgcode stack:
- PathVertex: add pressure_advance field
- Types.hpp: add PressureAdvance to EViewType enum
- ViewerImpl: add ColorRange, color mapping, range updates for PA
- LibVGCodeWrapper: pass pressure_advance from MoveVertex to PathVertex
GCodeViewer UI integration:
- Add "Pressure Advance" to view type dropdown
- Add PA color range in legend (3 decimal places)
- Add PA value display in sequential view marker tooltip
- Add PA row in position properties table
The GCodeProcessor PA parsing (M900, M572, SET_PRESSURE_ADVANCE)
is preserved from the original implementation.
* Tag Pressure Advance visualization changes with ORCA comments
Signed-off-by: minicx <minicx@disroot.org>
---------
Signed-off-by: minicx <minicx@disroot.org>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: Claude <noreply@anthropic.com>
* Reapply "Switch to self hosted mac runner (#12024)" with proper fix
This reverts commit 783f9926e3.
* use conditional logic for self-hosted runners
* improve readbility
- Add configurable GLEW_USE_EGL option (default OFF) to match wxWidgets
- Explicitly set wxUSE_GLCANVAS_EGL=OFF for vendored wxWidgets build
- Add compile-time check to detect EGL/GLX backend mismatch between
GLEW and wxWidgets, preventing silent rendering failures
The bug occurred when GLEW was compiled with EGL support (using
eglGetProcAddress) but wxWidgets created GLX contexts. This mismatch
caused OpenGL function pointers to fail loading, resulting in blank
3D model preview.
Co-authored-by: SoftFever <softfeverever@gmail.com>
