ea402ff871
Fixed case in MMU segmentation when the infinity-edge in the Voronoi diagram has vertex0(), and vertex1() equals nullptr.
2021-04-27 00:36:22 +02:00
37720e9b28
Added hiding of MMU segmentation gizmo when it is selected printer with only one extruder.
2021-04-27 00:35:43 +02:00
3ae74a5ca8
1) New methods PrintObject::num_regions() and ::has_region() to make
...
the code more readable and to highlight where PrintObject::region_volumes
are actually set and consumed.
2) Replaced Slic3r::clamp() with std::clamp(). They differ in the order
of their parameters, thus hopefully no new bugs were introduced.
3) Some refactoring of MultiMaterialSegmentation for efficiency.
2021-04-22 11:41:26 +02:00
08d553d411
MMU segmentation refactoring: Most of the MMU segmentation code
...
was extracted to its own file.
2021-04-20 15:07:05 +02:00
c4590bec6b
Info in ObjectList: Added variable layer height
2021-04-20 15:07:05 +02:00
98fbbad389
Info in ObjectList: Settings should be above the new info items, info items are selectable
2021-04-20 15:07:05 +02:00
7615d31afc
Show info about custom supports and seam in ObjectList
...
Slight refactoring in GLGizmosManager so it is easier to open a gizmo from the ObjectList
2021-04-20 15:07:05 +02:00
48f624d0d5
Disabled thick bridges, updated support settings. Bundle refactoring.
2021-04-20 15:07:05 +02:00
245059f8e3
WIP: Added support for top and bottom layers for MMU segmentation.
2021-04-19 19:21:06 +02:00
2db60126aa
WIP: Allows regions of MMU segmentation to be trimmed by chosen width.
2021-04-19 07:12:42 +02:00
97a85eb487
WIP: MMU segmentation without top and bottom layers
2021-04-19 07:04:50 +02:00
ef8718327b
WIP: Duplicated the FDM support gizmo for the MMU segmentation
2021-04-19 07:01:11 +02:00
e5b7c3536a
Removed mutable members from class GLToolbar
2021-04-16 15:49:37 +02:00
24eed24037
Removed mutable members from class Selection
2021-04-16 15:25:03 +02:00
714b70f8d3
Further refactoring into struct Camera
2021-04-16 14:05:55 +02:00
61e1b2a993
Removed mutable members from struct Camera
2021-04-16 13:44:01 +02:00
cb98885c2b
Fixed flickering of 3D scene GUI when the scene's bounding box gets very big
2021-04-16 12:49:57 +02:00
d9f13f1420
Fixed conversion to utf8 of strings entered using Custom G-code dialog
2021-04-16 09:48:22 +02:00
2ab7acd291
Merge pull request #6357 from pmjdebruijn/creality
...
Creality Filament Updates
2021-04-15 22:20:07 +02:00
c052b78005
After issuing the color change custom G-code, which is most likely
...
just M600, reset the internal retract counter, so that a retract
will happen after the firmware returns from M600 to the initial position.
Fixes "Blobs on print after manual color change #6362 "
2021-04-15 16:29:30 +02:00
8fa5a131f2
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2021-04-15 13:48:29 +02:00
d12bfef0a8
RemovableManager on OSX: Testing for dictionary values for nullness.
...
Hopefully it fixes Can not start slicer on mac Bigsur #5719
2021-04-15 13:48:20 +02:00
e658823f57
Fix for arrange crash when geometry has zero length segments
...
fixes #5749
2021-04-15 13:23:35 +02:00
1ed9795340
Follow-up of 526233ca47 -> Take in account original instances scale factor
2021-04-15 08:41:20 +02:00
00095288a1
Delete x1_thumbnail.png
2021-04-14 18:48:48 +02:00
815e169303
Delete genius_thumbnail.png
2021-04-14 18:48:38 +02:00
2e61826e3a
Add files via upload
2021-04-14 18:48:06 +02:00
7428926a28
creality.ini: add 3DJAKE ecoPLA Matt
...
the filament is very flowy, which means it prints well at lower temperatures.
and given the limited part cooling fan on most creality printers, it prints
less well at higher temperatures.
2021-04-14 18:00:09 +02:00
c5767a2246
creality.ini: add Devil Design approx spool weights
...
by manufacturer specifications:
https://devildesign.com/download/PLA_-_product_card.pdf
2021-04-14 17:59:55 +02:00
ffefa3625e
Modified version of automatic downscale on load of objects too big
2021-04-14 14:46:49 +02:00
ddc8e0d7de
Fixed obvious bug in move operator, discovered by clang lint ran by Tamas.
2021-04-14 14:25:30 +02:00
847cdcb7cb
Fix integer overflows in libnest2d tests
2021-04-14 08:51:54 +02:00
e610102fa5
Fixed build against wxWidgets 3.0
2021-04-14 07:05:12 +02:00
d95f9425ce
creality.ini: Extrudr NX2 slightly lower temps
...
After more practical testing, a slightly lower temp is beneficial on
small pointy areas, preventing them from being slightly deformed.
2021-04-13 19:09:54 +02:00
f0e1464ca3
WIP: Fix of arrangement after reducing ClipperLib::cInt
...
from int64_t to int32_t
2021-04-13 16:35:46 +02:00
a1a50fe096
Marked the unsafe ClipperUtils offset functions with CLIPPERUTILS_UNSAFE_OFFSET
...
Replaced some of the unsafe offset functions with safe variants.
Please test the
1) print bed from STL function
2) concentric infill
2021-04-13 13:28:37 +02:00
1f15405336
Fix boost dependency url.
...
Original host's lifetime has ended, see here: https://github.com/boostorg/boost/issues/502
This is PR #6349 , amended by @lukasmatena who added the changes for platforms other than Windows.
2021-04-13 12:25:25 +02:00
1b6534d5ac
Clipper / ClipperUtils:
...
1) Let Clipper use int32_t for representing its coordinates. This
reduces memory and allows to skip conversion between Slic3r Polygon
and Clipper polygon.
2) Disable additional offset before executing the Clipper Offset algorithm.
We don't see any reason for that and it required 64bit Clipper coordinates,
which were disabled with 1).
2021-04-13 11:31:54 +02:00
05386e9b20
FDM snug supports: New parameter "closing radius", inspired by Cura's
...
support_join_distance
2021-04-12 14:56:36 +02:00
9ec9d83629
Updated min_slic3r_version
...
2.3.1-beta
2021-04-12 12:11:46 +02:00
114873d946
updated min_slic3r_version
2021-04-12 11:45:26 +02:00
3a03031fb5
Creality 0.0.15
2021-04-12 11:44:14 +02:00
69d9cf3062
version bumped up to 0.0.15
2021-04-12 11:42:32 +02:00
906cad90b7
updated min_slic3r_version
2021-04-12 11:40:55 +02:00
47af6eab9f
Update Anycubic.idx
2021-04-12 11:28:10 +02:00
9207c11bc4
Bumped up version to 0.0.9
2021-04-12 11:27:29 +02:00
aad9aa112d
Fixed a typo in an error message (--sw_renderer -> --sw-renderer)
2021-04-12 09:15:28 +02:00
f8d7c7684a
Configs should point to PrusaSlicer-alpha, not beta in alpha stage.
2021-04-09 08:11:40 +02:00
2e70270d64
Fix of brim under supports
2021-04-08 16:36:52 +02:00
c0434121f5
New FDM support sparse infill zig-zag algorithm.
...
Fixed some old support and infill issues.
Fixes support problem #4295
Fixes Parts of interface layer extends beyond supports and cannot be printed
Fixes support missing under horizontal overhang #6058
Fixes Slicer double-traces small sections of Rectilinear Supports, causes
Fixes plastic buildup and nozzle crashes #4951
Fixes Add "Angle Interface layers" #2969
2021-04-08 15:29:40 +02:00
