* Updating the Russian translation
Updating the Russian translation and adding new lines
* Add files via upload
* Delete OrcaSlicer.mo
* Create RU
* Delete RU
* Updating the Russian translation
Updating the Russian translation
* Updating the Russian translation
Updating the Russian translation
* Updating the translation into Russian, with the support of @lizardjazz11
Updating the translation into Russian, with the support of @lizardjazz1
1. Changed printing speed for all PA tests, where the speed will be calculated by max(100, outer_wall_speed) with consideration of max_volumetric_speed.
2. PA tower now uses the classic wall generator.
#1616
* First working conical overhang impl
* Add settings for Make overhang printable
* Added an Advanced setting to the Quality menu for Make overhang printable
* Allow toggling the feature and adjusting the angle threshold
* Retain recesses in the bottom of the model when "Make Overhangs Printable" is turned on
* Add settings for Make overhang printable hole size
* Allow disabling conical overhang per modifier
* Should check upper layer instead
* Skip unnecessary layers
* Apply conical overhang before any size compensation
which fixs the `lslices` not being updated issue and also the elephant foot compensation
* 1. Fix an issue that changing make_overhang_printable related parameters won't clear caches properly.
2. Tweak the logic of make_overhang_printable parameter so that it works for per region/object/print level. Remove make_overhang_printable_disable parameter.
* Change default make_overhang_printable_angle to 55
* One more missing commit
* 1. Skip checking default_region_config()->make_overhang_printable
2. Handle make_overhang_printable_angle and make_overhang_printable_hole_size value change
---------
Co-authored-by: David Bern <odie5533@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Port single wall on top surface from classic wall generator to Arachne
* Move the surface split code into a separate function to be shared between classic and Arachne. This also adds bridge detection to Arachne as well.
* Remove unwanted infills
* Fix insets calculating
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Calculate extrusion width %s as a function of nozzle width, not layer height
* handled more width conversions
* more missing percent handling
* even more missed percent handling
* even more more extrusion % handling
* some fixes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
[BUGFIX] Fix Klipper SET_VELOCITY_LIMIT code
- Always write out SET_VELOCITY_LIMTIT ACCEL=<acceleration> independently of the accel_to_decel setting
- Append the ACCEL_TO_DECEL fragment if enabled in config
