Martin Loidl
fbb3d6d51f
fixed possible segmentation in physical printer dialog
...
* When pressing "Refresh Printers" in Physical Printer Dialog slicer
crashed because of a wrong cast
2020-11-14 21:46:54 +01:00
rtyr
c2dc0fa230
Updated Anycubic thumbnails.
2020-11-13 13:08:09 +01:00
enricoturri1966
a1ba52c2d5
Merge remote-tracking branch 'origin/et_sequential'
2020-11-13 11:52:26 +01:00
enricoturri1966
a5ab490dd9
Code cleanup
2020-11-13 11:50:52 +01:00
enricoturri1966
087a4f10e0
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_sequential
2020-11-13 10:46:41 +01:00
YuSanka
e9df5e42f1
Fix the typo in 932dfb4fca
...
The resize of the Spincontrol was wrong placed in the code
2020-11-12 21:43:21 +01:00
YuSanka
5d2a974886
Localization:
...
* added missed phrases
* fixed some phrases
* updated POT-file and PO/MO-files for the CZ-translation
2020-11-12 21:35:39 +01:00
rtyr
fb2a9862e7
Updated LulzBot thumbnails.
2020-11-12 19:20:23 +01:00
rtyr
b1cef96071
Added filament profiles, adjusted temperatures, updated start g-code for some models.
2020-11-12 18:55:42 +01:00
rtyr
384c2aced3
Version changed to 0.0.6
2020-11-12 18:52:48 +01:00
rtyr
388beeb958
Updated BIBO2 thumbnail. Removed "BETA" label.
2020-11-12 18:47:30 +01:00
rtyr
151d8b9482
Merge pull request #5143 from pmjdebruijn/creality_filament_5
...
creality.ini: raise remaining PLA bed temperatures to 60
2020-11-12 18:45:41 +01:00
Pascal de Bruijn
d513288916
creality.ini: raise remaining PLA bed temperatures to 60
...
While doing a bunch of bed adhesion tests, both on Creality's
FakeTak as well as on smooth PEI, while 50 degrees seems to work
with most lower temp PLAs at least, but less so with the higher
temp PLAs, it universally requires the first layer height to be
dialed in much better to not get any warping.
With the bed temperature set to 60 degrees, there is much more
leeway in the first layer height while still getting unwarped
prints.
Particularly given that most Creality printers don't have ABL as
standard, I think it might sense from a robustness perspective
to have all PLAs default to at least 60 degrees, as to increase
chances prints will come out just fine.
https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
2020-11-12 18:26:45 +01:00
enricoturri1966
f0cb35e7ee
Sequential print visualization using vertical slider in preview -> Added travel moves
2020-11-12 16:29:44 +01:00
YuSanka
8e30c7a184
GTK3 specific : Fix of #5053
2020-11-12 15:33:24 +01:00
YuSanka
466d39b42c
Physical printers dialog: Update Test button in respect to the inputted printhost
2020-11-12 15:24:47 +01:00
enricoturri1966
c393ace3a8
ENABLE_GCODE_VIEWER set as default in fff_print test and PrusaSlicer.cpp
2020-11-12 15:01:59 +01:00
enricoturri1966
f46a43bb6d
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-11-12 14:05:56 +01:00
enricoturri1966
5f9df6333f
ENABLE_GCODE_VIEWER set as default in libslic3r
2020-11-12 14:03:58 +01:00
YuSanka
f2d7fd2017
Custom controls : The width for full_width fields is updated according to the custom control width
...
(thanks to the @supermerill for the mention on it, 6acf6bdf21#5062
2020-11-12 10:13:16 +01:00
enricoturri1966
46d29ca75f
Fix of previous commit
2020-11-11 17:35:29 +01:00
enricoturri1966
733d4702c2
Follow-up of 80e8b5e985 -> Fixed include in GCode.xsp
2020-11-11 17:28:56 +01:00
enricoturri1966
21aedc156e
Removed the legacy PreviewData.cpp,hpp
2020-11-11 16:38:51 +01:00
enricoturri1966
7ab33750d1
WIP - Sequential print visualization using vertical slider in preview (missing travel moves)
2020-11-11 16:22:09 +01:00
David Kocik
8efdab1bba
Merge branch 'dk_filaments' into master
2020-11-11 16:10:38 +01:00
David Kocik
654bc266fc
escape_ampersand function and changed order of printer names and pictures in config wizard
2020-11-11 16:08:27 +01:00
enricoturri1966
28cfd71f51
Follow-up of bb74d2da5b and 7b2aca0159 -> Removed inclusions of GCode/Analyzer.hpp and GCodeTimeEstimator.hpp
2020-11-11 15:41:48 +01:00
YuSanka
dd2799b8d9
Fixed of #5081
...
Width of sub-label is calculated by using of GetTextExtent() instead of PaintDC->GetMultiLineTextExtent, because of PaintDC is not OK sometimes.
For example on GTK3 PaintDC->IsOk() only, when it's using in a native paint event
see https://github.com/wxWidgets/wxWidgets/blob/master/src/gtk/dc.cpp , line 346
2020-11-11 12:04:15 +01:00
rtyr
ffed59e796
Updated creality thumbnails. Removed "BETA" label.
2020-11-10 17:53:49 +01:00
rtyr
55498604d4
Updated thumbnails. Removed "BETA" sign.
2020-11-10 17:26:42 +01:00
rtyr
93ff058d6f
Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support
...
https://github.com/prusa3d/PrusaSlicer-settings/pull/108
2020-11-10 16:02:34 +01:00
rtyr
d9c92c9310
Merge pull request #5118 from trilab3d/master-trilab
...
Added thumbnails for new TriLAB printers
2020-11-10 15:59:49 +01:00
Matej Supik
2326bb9743
Added thumbnails for new trilab printers - https://github.com/prusa3d/PrusaSlicer-settings/pull/108
2020-11-10 12:02:50 +01:00
rtyr
c4977191d4
Merge pull request #5117 from pmjdebruijn/creality_filament_4
...
Creality Filaments 4
2020-11-10 11:57:49 +01:00
YuSanka
d55c1e22ee
MM print : Fixed re-scaling of the Extruders column in the Object list
2020-11-10 11:06:33 +01:00
David Kocik
f876878d09
Merge branch 'dk_notifications' into master
2020-11-10 09:23:16 +01:00
David Kocik
824a5eabe9
Callback stored at std::function for notification hyperlink. Notification progress bar draft.
2020-11-10 09:22:47 +01:00
Pascal de Bruijn
0ef2eb9b9c
creality.ini: Add Devil Design PLA Galaxy (Glitter)
...
This glitter PLA requires a significantly higher hot end temp to
get a similar amount of flow as the same brands counterpart
regular PLA filament
It even needs a slightly higher bed temp to prevent warping on
sharp corners
2020-11-09 19:27:02 +01:00
Pascal de Bruijn
8201d6f32b
creality.ini: disable pause_print_gcode ( #4980 )
2020-11-09 18:52:01 +01:00
rtyr
21dea54a95
Merge pull request #5114 from pmjdebruijn/creality_head_bed_first
...
creality.ini: introduce slow abl variant start_gcode
2020-11-09 15:38:43 +01:00
David Kocik
d8b3c80ca0
Merge branch 'dk_eject' into master
2020-11-09 15:16:09 +01:00
David Kocik
a82cd93601
imgui README.md prev commit hash
2020-11-09 15:15:30 +01:00
David Kocik
75cd39ac9f
Large notification buttons and icons
2020-11-09 15:15:30 +01:00
enricoturri1966
4a79df540e
#5098 - Fixed no preview after language change
2020-11-09 14:27:00 +01:00
Lukas Matena
f6ad6f088d
Fix of an ASAN crash on app close (Linux)
2020-11-09 14:00:58 +01:00
Pascal de Bruijn
a8b3e7dbd1
creality.ini: introduce slow abl variant start_gcode
...
printers with a large bed are probably more prone to heat induced
bed warping, there we'll split up our abl start_gcode in fast
and slow variants, where printers with a smaller bed like
the Ender-3 will still use the fast variant, printers with
a large bed like the CR-10 will use the slow variant which
heats up the bed before starting the abl procedure.
2020-11-09 13:48:01 +01:00
enricoturri1966
554e0918d3
GCode Viewer - Fixed color print visualization for gcode containing multiple extruders
2020-11-09 13:06:20 +01:00
rtyr
02f394cbdd
Fixed predator output filaname format, infill overlap
2020-11-09 11:44:00 +01:00
rtyr
a4635a3d82
Bumped up version to 0.0.4
2020-11-09 11:43:02 +01:00
rtyr
65887baebc
Merge pull request #5104 from Tillverka3d/master
...
Fix predator output filaname format, infill overlap, and retraction length
2020-11-09 11:39:39 +01:00
