fix(profile): Kobra X bed_temperature_formula auf by_first_filament setzen

G9111 hat während des Auto-Levelings auf den höchsten Bett-Temp-Wert
aller Projekt-Filamente geheizt statt auf die Temp des aktiven Filaments.
Fixes #4 (OrcaSlicer-KX), related KX-Bridge-Release#96.

.github/workflows/assign.yml

@@ -1,11 +1,6 @@
 name: Assign Issue
 
-on:
-  schedule:
-    - cron: 0 0 * * *
-  issue_comment:
-    types: [created]
-  workflow_dispatch:
+on: {}
 
 jobs:
   assign:

.github/workflows/auto-close-duplicates.yml

@@ -1,9 +1,6 @@
 name: Auto-close duplicate issues
 description: Auto-closes issues that are duplicates of existing issues
-on:
-  schedule:
-    - cron: "0 9 * * *"
-  workflow_dispatch:
+on: {}
 
 jobs:
   auto-close-duplicates:

.github/workflows/backfill-duplicate-comments.yml

@@ -1,22 +1,7 @@
 name: Backfill Duplicate Comments
 description: Triggers duplicate detection for old issues that don't have duplicate comments
 
-on:
-  workflow_dispatch:
-    inputs:
-      days_back:
-        description: 'How many days back to look for old issues'
-        required: false
-        default: '90'
-        type: string
-      dry_run:
-        description: 'Dry run mode (true to only log what would be done)'
-        required: false
-        default: 'true'
-        type: choice
-        options:
-          - 'true'
-          - 'false'
+on: {}
 
 jobs:
   backfill-duplicate-comments:

.github/workflows/build_all.yml

@@ -1,269 +1,209 @@
-name: Build all
-
-on:
-  push:
-    branches:
-     - main
-     - release/*
-     - belt-printer
-    paths:
-     - 'deps/**'
-     - 'src/**'
-     - '**/CMakeLists.txt'
-     - 'version.inc'
-     - 'localization/**'
-     - 'resources/**'
-     - ".github/workflows/build_*.yml"
-     - 'scripts/flatpak/**'
-     - 'scripts/msix/**'
-     - 'tests/**'
-
-  pull_request:
-    branches:
-     - main
-     - release/*
-    paths:
-     - 'deps/**'
-     - 'deps_src/**'
-     - 'src/**'
-     - '**/CMakeLists.txt'
-     - 'version.inc'
-     - ".github/workflows/build_*.yml"
-     - 'build_linux.sh'
-     - 'build_release_vs.bat'
-     - 'build_release_vs2022.bat'
-     - 'build_release_macos.sh'
-     - 'scripts/flatpak/**'
-     - 'scripts/msix/**'
-     - 'tests/**'
-
-
-  schedule:
-      - cron: '0 17 * * *' # run once a day at 1 AM Singapore time (UTC+8)
-
-  workflow_dispatch: # allows for manual dispatch
-    inputs:
-      build-deps-only:
-        description: 'Only build dependencies (bypasses caching)'
-        type: boolean
-        default: false
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event_name }}-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-  
-
-jobs:
-  build_linux:
-    strategy:
-      fail-fast: false
-      # Build both arches on every event (PRs included), through the same
-      # build_check_cache -> build_deps -> build_orca chain (the AppImage).
-      # aarch64 always uses the GitHub-hosted arm runner (there is no arm
-      # self-hosted server). amd64's empty arch is load-bearing: it keeps the
-      # historical 'linux-clang' deps cache key and the unsuffixed asset names.
-      matrix:
-        include:
-          - arch: ""
-            os: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }}
-          - arch: "aarch64"
-            os: ubuntu-24.04-arm
-    # Don't run scheduled builds on forks:
-    if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
-    uses: ./.github/workflows/build_check_cache.yml
-    with:
-      os: ${{ matrix.os }}
-      arch: ${{ matrix.arch }}
-      build-deps-only: ${{ inputs.build-deps-only || false }}
-    secrets: inherit
-  build_windows:
-    name: Build Windows ${{ matrix.arch }}
-    strategy:
-      fail-fast: false
-      matrix:
-        include:
-          - arch: x64
-            os: windows-latest
-          - arch: arm64
-            os: windows-11-arm
-    # Don't run scheduled builds on forks:
-    if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
-    uses: ./.github/workflows/build_check_cache.yml
-    with:
-      # Self-hosted runner is x64-only; ARM64 always uses the GitHub-hosted runner.
-      os: ${{ (matrix.arch == 'x64' && vars.SELF_HOSTED) && 'orca-win-server' || matrix.os }}
-      arch: ${{ matrix.arch }}
-      build-deps-only: ${{ inputs.build-deps-only || false }}
-      force-build: ${{ github.event_name == 'schedule' }}
-    secrets: inherit
-  build_macos_arch:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - arm64
-          - x86_64
-    # Don't run scheduled builds on forks:
-    if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
-    uses: ./.github/workflows/build_check_cache.yml
-    with:
-      os: ${{ vars.SELF_HOSTED && 'orca-macos-arm64' || 'macos-14' }}
-      arch: ${{ matrix.arch }}
-      build-deps-only: ${{ inputs.build-deps-only || false }}
-      force-build: ${{ github.event_name == 'schedule' }}
-    secrets: inherit
-  build_macos_universal:
-    name: Build macOS Universal
-    needs: build_macos_arch
-    if: ${{ !cancelled() && needs.build_macos_arch.result == 'success' && !inputs.build-deps-only && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
-    uses: ./.github/workflows/build_orca.yml
-    with:
-      os: ${{ vars.SELF_HOSTED && 'orca-macos-arm64' || 'macos-14' }}
-      arch: universal
-      macos-combine-only: true
-    secrets: inherit
-  unit_tests:
-    name: Unit Tests
-    # Tests are built on the aarch64 leg by default (faster GitHub arm runner),
-    # so run them there; self-hosted builds them on the amd64 server instead.
-    runs-on: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04-arm' }}
-    needs: build_linux
-    if: ${{ !cancelled() && success() }}
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-        with:
-          sparse-checkout: |
-            .github
-            scripts
-            tests
-      - name: Apt-Install Dependencies
-        if: ${{ !vars.SELF_HOSTED }}
-        uses: ./.github/actions/apt-install-deps
-      - name: Restore Test Artifact
-        uses: actions/download-artifact@v8
-        with:
-          name: ${{ github.sha }}-tests
-      - uses: lukka/get-cmake@latest
-        with:
-          cmakeVersion: "~4.3.0"  # use most recent 4.3.x version
-          useLocalCache: true         # <--= Use the local cache (default is 'false').
-          useCloudCache: true
-      - name: Unpackage and Run Unit Tests
-        timeout-minutes: 20
-        run: |
-          tar -xvf build_tests.tar
-          scripts/run_unit_tests.sh
-      - name: Upload Test Logs
-        uses: actions/upload-artifact@v7
-        if: ${{ failure() }}
-        with:
-          name: unit-test-logs
-          path: build/tests/**/*.log
-      - name: Publish Test Results
-        if: always()
-        uses: EnricoMi/publish-unit-test-result-action@v2
-        with:
-          files: "ctest_results.xml"
-      - name: Delete Test Artifact
-        if: success()
-        uses: geekyeggo/delete-artifact@v6
-        with:
-          name: ${{ github.sha }}-tests
-  flatpak:
-    name: "Flatpak"
-    container:
-      image: ghcr.io/flathub-infra/flatpak-github-actions:gnome-50
-      options: --privileged
-      volumes:
-        - /usr/local/lib/android:/usr/local/lib/android
-        - /usr/share/dotnet:/usr/share/dotnet
-        - /opt/ghc:/opt/ghc1
-        - /usr/local/share/boost:/usr/local/share/boost1
-        - /opt/hostedtoolcache:/opt/hostedtoolcache1
-    strategy:
-      fail-fast: false
-      matrix:
-        variant:
-          - arch: x86_64
-            runner: ubuntu-24.04
-          - arch: aarch64
-            runner: ubuntu-24.04-arm
-    # Don't run scheduled builds on forks; skip entirely on self-hosted runners
-    if: ${{ !cancelled() && !vars.SELF_HOSTED && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
-
-    runs-on: ${{ matrix.variant.runner }}
-    env:
-      date:
-      ver:
-      ver_pure:
-      # Belt-printer nightlies share the main nightly release but carry a `_belt`
-      # suffix so they never overwrite the main assets.
-      nightly_suffix: ${{ github.ref == 'refs/heads/belt-printer' && '_belt' || '' }}
-    steps:
-    - name: "Remove unneeded stuff to free disk space"
-      run:
-        rm -rf /usr/local/lib/android/* /usr/share/dotnet/* /opt/ghc1/* "/usr/local/share/boost1/*" /opt/hostedtoolcache1/*
-    - uses: actions/checkout@v6
-    - name: Get the version and date
-      run: |
-        ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
-        if [[ "${{ github.event_name }}" == "pull_request" ]]; then
-          ver="PR-${{ github.event.number }}"
-          git_commit_hash="${{ github.event.pull_request.head.sha }}"
-        else
-          ver=V$ver_pure
-          git_commit_hash="${{ github.sha }}"
-        fi
-        echo "ver=$ver" >> $GITHUB_ENV
-        echo "ver_pure=$ver_pure" >> $GITHUB_ENV
-        echo "date=$(date +'%Y%m%d')" >> $GITHUB_ENV
-        echo "git_commit_hash=$git_commit_hash" >> $GITHUB_ENV
-      shell: bash
-    # Manage flatpak-builder cache externally so PRs restore but never upload
-    - name: Restore flatpak-builder cache
-      if: github.event_name == 'pull_request'
-      uses: actions/cache/restore@v5
-      with:
-        path: .flatpak-builder
-        key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.event.pull_request.base.sha }}
-        restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
-    - name: Save/restore flatpak-builder cache
-      if: github.event_name != 'pull_request'
-      uses: actions/cache@v5
-      with:
-        path: .flatpak-builder
-        key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.sha }}
-        restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
-    - name: Disable debug info for faster CI builds
-      run: |
-        sed -i '/^build-options:/a\  no-debuginfo: true\n  strip: true' \
-          scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
-      shell: bash
-    - name: Inject git commit hash into Flatpak manifest
-      run: |
-        sed -i "/name: OrcaSlicer/{n;s|buildsystem: simple|buildsystem: simple\n    build-options:\n      env:\n        git_commit_hash: \"$git_commit_hash\"|}" \
-          scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
-      shell: bash
-    - uses: flatpak/flatpak-github-actions/flatpak-builder@master
-      with:
-        bundle: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        manifest-path: scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
-        cache: false
-        arch: ${{ matrix.variant.arch }}
-        upload-artifact: false
-    - name: Upload artifacts Flatpak
-      uses: actions/upload-artifact@v7
-      with:
-        name: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        path: '/__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak'
-    - name: Deploy Flatpak to nightly release
-      if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || github.ref == 'refs/heads/belt-printer')
-      uses: WebFreak001/deploy-nightly@v3.2.0
-      with:
-        upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
-        release_id: 137995723
-        asset_path: /__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        asset_name: OrcaSlicer-Linux-flatpak_nightly${{ env.nightly_suffix }}_${{ matrix.variant.arch }}.flatpak
-        asset_content_type: application/octet-stream
-        max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
+name: Build all
+
+on: {}
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event_name }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
+  
+
+jobs:
+  build_linux:
+    strategy:
+      fail-fast: false
+      # Build both arches on every event (PRs included), through the same
+      # build_check_cache -> build_deps -> build_orca chain (the AppImage).
+      # aarch64 always uses the GitHub-hosted arm runner (there is no arm
+      # self-hosted server). amd64's empty arch is load-bearing: it keeps the
+      # historical 'linux-clang' deps cache key and the unsuffixed asset names.
+      matrix:
+        include:
+          - arch: ""
+            os: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }}
+          - arch: "aarch64"
+            os: ubuntu-24.04-arm
+    # Don't run scheduled builds on forks:
+    if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
+    uses: ./.github/workflows/build_check_cache.yml
+    with:
+      os: ${{ matrix.os }}
+      arch: ${{ matrix.arch }}
+      build-deps-only: ${{ inputs.build-deps-only || false }}
+    secrets: inherit
+  build_windows:
+    # Don't run scheduled builds on forks:
+    if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
+    uses: ./.github/workflows/build_check_cache.yml
+    with:
+      os: ${{ vars.SELF_HOSTED && 'orca-win-server' || 'windows-latest' }}
+      build-deps-only: ${{ inputs.build-deps-only || false }}
+      force-build: ${{ github.event_name == 'schedule' }}
+    secrets: inherit
+  build_macos_arch:
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - arm64
+          - x86_64
+    # Don't run scheduled builds on forks:
+    if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
+    uses: ./.github/workflows/build_check_cache.yml
+    with:
+      os: ${{ vars.SELF_HOSTED && 'orca-macos-arm64' || 'macos-14' }}
+      arch: ${{ matrix.arch }}
+      build-deps-only: ${{ inputs.build-deps-only || false }}
+      force-build: ${{ github.event_name == 'schedule' }}
+    secrets: inherit
+  build_macos_universal:
+    name: Build macOS Universal
+    needs: build_macos_arch
+    if: ${{ !cancelled() && needs.build_macos_arch.result == 'success' && !inputs.build-deps-only && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
+    uses: ./.github/workflows/build_orca.yml
+    with:
+      os: ${{ vars.SELF_HOSTED && 'orca-macos-arm64' || 'macos-14' }}
+      arch: universal
+      macos-combine-only: true
+    secrets: inherit
+  unit_tests:
+    name: Unit Tests
+    # Tests are built on the aarch64 leg by default (faster GitHub arm runner),
+    # so run them there; self-hosted builds them on the amd64 server instead.
+    runs-on: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04-arm' }}
+    needs: build_linux
+    if: ${{ !cancelled() && success() }}
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+        with:
+          sparse-checkout: |
+            .github
+            scripts
+            tests
+      - name: Apt-Install Dependencies
+        if: ${{ !vars.SELF_HOSTED }}
+        uses: ./.github/actions/apt-install-deps
+      - name: Restore Test Artifact
+        uses: actions/download-artifact@v8
+        with:
+          name: ${{ github.sha }}-tests
+      - uses: lukka/get-cmake@latest
+        with:
+          cmakeVersion: "~4.3.0"  # use most recent 4.3.x version
+          useLocalCache: true         # <--= Use the local cache (default is 'false').
+          useCloudCache: true
+      - name: Unpackage and Run Unit Tests
+        timeout-minutes: 20
+        run: |
+          tar -xvf build_tests.tar
+          scripts/run_unit_tests.sh
+      - name: Upload Test Logs
+        uses: actions/upload-artifact@v7
+        if: ${{ failure() }}
+        with:
+          name: unit-test-logs
+          path: build/tests/**/*.log
+      - name: Publish Test Results
+        if: always()
+        uses: EnricoMi/publish-unit-test-result-action@v2
+        with:
+          files: "ctest_results.xml"
+      - name: Delete Test Artifact
+        if: success()
+        uses: geekyeggo/delete-artifact@v6
+        with:
+          name: ${{ github.sha }}-tests
+  flatpak:
+    name: "Flatpak"
+    container:
+      image: ghcr.io/flathub-infra/flatpak-github-actions:gnome-50
+      options: --privileged
+      volumes:
+        - /usr/local/lib/android:/usr/local/lib/android
+        - /usr/share/dotnet:/usr/share/dotnet
+        - /opt/ghc:/opt/ghc1
+        - /usr/local/share/boost:/usr/local/share/boost1
+        - /opt/hostedtoolcache:/opt/hostedtoolcache1
+    strategy:
+      fail-fast: false
+      matrix:
+        variant:
+          - arch: x86_64
+            runner: ubuntu-24.04
+          - arch: aarch64
+            runner: ubuntu-24.04-arm
+    # Don't run scheduled builds on forks; skip entirely on self-hosted runners
+    if: ${{ !cancelled() && !vars.SELF_HOSTED && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
+
+    runs-on: ${{ matrix.variant.runner }}
+    env:
+      date:
+      ver:
+      ver_pure:
+    steps:
+    - name: "Remove unneeded stuff to free disk space"
+      run:
+        rm -rf /usr/local/lib/android/* /usr/share/dotnet/* /opt/ghc1/* "/usr/local/share/boost1/*" /opt/hostedtoolcache1/*
+    - uses: actions/checkout@v6
+    - name: Get the version and date
+      run: |
+        ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
+        if [[ "${{ github.event_name }}" == "pull_request" ]]; then
+          ver="PR-${{ github.event.number }}"
+          git_commit_hash="${{ github.event.pull_request.head.sha }}"
+        else
+          ver=V$ver_pure
+          git_commit_hash="${{ github.sha }}"
+        fi
+        echo "ver=$ver" >> $GITHUB_ENV
+        echo "ver_pure=$ver_pure" >> $GITHUB_ENV
+        echo "date=$(date +'%Y%m%d')" >> $GITHUB_ENV
+        echo "git_commit_hash=$git_commit_hash" >> $GITHUB_ENV
+      shell: bash
+    # Manage flatpak-builder cache externally so PRs restore but never upload
+    - name: Restore flatpak-builder cache
+      if: github.event_name == 'pull_request'
+      uses: actions/cache/restore@v5
+      with:
+        path: .flatpak-builder
+        key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.event.pull_request.base.sha }}
+        restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
+    - name: Save/restore flatpak-builder cache
+      if: github.event_name != 'pull_request'
+      uses: actions/cache@v5
+      with:
+        path: .flatpak-builder
+        key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.sha }}
+        restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
+    - name: Disable debug info for faster CI builds
+      run: |
+        sed -i '/^build-options:/a\  no-debuginfo: true\n  strip: true' \
+          scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
+      shell: bash
+    - name: Inject git commit hash into Flatpak manifest
+      run: |
+        sed -i "/name: OrcaSlicer/{n;s|buildsystem: simple|buildsystem: simple\n    build-options:\n      env:\n        git_commit_hash: \"$git_commit_hash\"|}" \
+          scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
+      shell: bash
+    - uses: flatpak/flatpak-github-actions/flatpak-builder@master
+      with:
+        bundle: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
+        manifest-path: scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
+        cache: false
+        arch: ${{ matrix.variant.arch }}
+        upload-artifact: false
+    - name: Upload artifacts Flatpak
+      uses: actions/upload-artifact@v7
+      with:
+        name: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
+        path: '/__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak'
+    - name: Deploy Flatpak to nightly release
+      if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main'
+      uses: WebFreak001/deploy-nightly@v3.2.0
+      with:
+        upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
+        release_id: 137995723
+        asset_path: /__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
+        asset_name: OrcaSlicer-Linux-flatpak_nightly_${{ matrix.variant.arch }}.flatpak
+        asset_content_type: application/octet-stream
+        max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted

.github/workflows/build_check_cache.yml

@@ -1,67 +1,52 @@
-name: Check Cache
-
-on:
-  workflow_call:
-    inputs:
-      os:
-        required: true
-        type: string
-      arch:
-        required: false
-        type: string
-      build-deps-only:
-        required: false
-        type: boolean
-      force-build:
-        required: false
-        type: boolean
-  
-jobs:
-  check_cache: # determines if there is a cache and outputs variables used in caching process
-    name: Check Cache
-    runs-on: ${{ inputs.os }}
-    outputs:
-      cache-key: ${{ steps.set_outputs.outputs.cache-key }}
-      cache-path: ${{ steps.set_outputs.outputs.cache-path }}
-      valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-        with:
-          lfs: 'false'
-        
-      - name: set outputs
-        id: set_outputs
-        env:
-          # Keep macOS/Windows cache keys architecture-specific. amd64 Linux passes
-          # no arch (key stays 'linux-clang', preserving the existing cache);
-          # aarch64 gets its own 'linux-clang-aarch64' key.
-          cache-os: ${{ runner.os == 'macOS' && format('macos-{0}', inputs.arch) || (runner.os == 'Windows' && format('windows-{0}', inputs.arch) || format('linux-clang{0}', inputs.arch && format('-{0}', inputs.arch) || '')) }}
-          # ARM64 builds use the build-arm64 tree (see build_release_vs.bat); x64/other use build.
-          dep-folder-name: ${{ runner.os == 'macOS' && format('/{0}', inputs.arch) || (runner.os == 'Windows' && inputs.arch == 'arm64') && '-arm64/OrcaSlicer_dep' || '/OrcaSlicer_dep' }}
-          output-cmd: ${{ runner.os == 'Windows' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
-        run: |
-          echo cache-key=${{ env.cache-os }}-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }} >> ${{ env.output-cmd }}
-          echo cache-path=${{ github.workspace }}/deps/build${{ env.dep-folder-name }} >> ${{ env.output-cmd }}
-            
-      - name: load cache
-        id: cache_deps
-        uses: actions/cache@v5
-        with:
-          path: ${{ steps.set_outputs.outputs.cache-path }}
-          key: ${{ steps.set_outputs.outputs.cache-key }}
-          lookup-only: true
-        
-  build_deps: # call next step
-    name: Build Deps
-    needs: [check_cache]
-    uses: ./.github/workflows/build_deps.yml
-    with:
-      cache-key: ${{ needs.check_cache.outputs.cache-key }}
-      cache-path: ${{ needs.check_cache.outputs.cache-path }}
-      valid-cache: ${{ needs.check_cache.outputs.valid-cache == 'true' }}
-      os: ${{ inputs.os }}
-      arch: ${{ inputs.arch }}
-      build-deps-only: ${{ inputs.build-deps-only }}
-      force-build: ${{ inputs.force-build }}
-    secrets: inherit
+name: Check Cache
+
+on: {}
+
+jobs:
+  check_cache: # determines if there is a cache and outputs variables used in caching process
+    name: Check Cache
+    runs-on: ${{ inputs.os }}
+    outputs:
+      cache-key: ${{ steps.set_outputs.outputs.cache-key }}
+      cache-path: ${{ steps.set_outputs.outputs.cache-path }}
+      valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+        with:
+          lfs: 'false'
+        
+      - name: set outputs
+        id: set_outputs
+        env:
+          # Keep macOS/Linux cache keys architecture-specific. amd64 Linux passes
+          # no arch (key stays 'linux-clang', preserving the existing cache);
+          # aarch64 gets its own 'linux-clang-aarch64' key.
+          cache-os: ${{ runner.os == 'macOS' && format('macos-{0}', inputs.arch) || (runner.os == 'Windows' && 'windows' || format('linux-clang{0}', inputs.arch && format('-{0}', inputs.arch) || '')) }}
+          dep-folder-name: ${{ runner.os == 'macOS' && format('/{0}', inputs.arch) || '/OrcaSlicer_dep' }}
+          output-cmd: ${{ runner.os == 'Windows' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
+        run: |
+          echo cache-key=${{ env.cache-os }}-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }} >> ${{ env.output-cmd }}
+          echo cache-path=${{ github.workspace }}/deps/build${{ env.dep-folder-name }} >> ${{ env.output-cmd }}
+            
+      - name: load cache
+        id: cache_deps
+        uses: actions/cache@v5
+        with:
+          path: ${{ steps.set_outputs.outputs.cache-path }}
+          key: ${{ steps.set_outputs.outputs.cache-key }}
+          lookup-only: true
+        
+  build_deps: # call next step
+    name: Build Deps
+    needs: [check_cache]
+    uses: ./.github/workflows/build_deps.yml
+    with:
+      cache-key: ${{ needs.check_cache.outputs.cache-key }}
+      cache-path: ${{ needs.check_cache.outputs.cache-path }}
+      valid-cache: ${{ needs.check_cache.outputs.valid-cache == 'true' }}
+      os: ${{ inputs.os }}
+      arch: ${{ inputs.arch }}
+      build-deps-only: ${{ inputs.build-deps-only }}
+      force-build: ${{ inputs.force-build }}
+    secrets: inherit

.github/workflows/build_deps.yml

@@ -1,27 +1,4 @@
-on:
-  workflow_call:
-    inputs:
-      cache-key:
-        required: true
-        type: string
-      cache-path:
-        required: true
-        type: string
-      valid-cache:
-        required: true
-        type: boolean
-      os:
-        required: true
-        type: string
-      arch:
-        required: false
-        type: string
-      build-deps-only:
-        required: false
-        type: boolean
-      force-build:
-        required: false
-        type: boolean
+on: {}
 
 jobs:
   build_deps:

.github/workflows/build_orca.yml

@@ -1,22 +1,4 @@
-on:
-    workflow_call:
-      inputs:
-        cache-key:
-          required: false
-          type: string
-        cache-path:
-          required: false
-          type: string
-        os:
-          required: true
-          type: string
-        arch:
-          required: false
-          type: string
-        macos-combine-only:
-          required: false
-          type: boolean
-          default: false
+on: {}
 
 jobs:
   build_orca:

.github/workflows/check_locale.yml

@@ -1,12 +1,6 @@
 name: Check locale
 
-on: 
-    pull_request:
-      branches: 
-       - main 
-      paths:
-       - 'localization/**'
-       - ".github/workflows/check_locale.yml"
+on: {}
 
 jobs:
   check_translation:

.github/workflows/check_profiles.yml

@@ -1,18 +1,5 @@
 name: Check profiles
-on:
-  pull_request:
-    branches:
-    - main
-    paths:
-    - 'resources/profiles/**'
-    - ".github/workflows/check_profiles.yml"
-
-  workflow_dispatch:
-    inputs:
-      logLevel:
-        description: 'Log level'
-        required: true
-        default: 'warning'
+on: {}
 
 permissions:
   contents: read
@@ -41,7 +28,7 @@ jobs:
           curl -L -o OrcaSlicer_profile_validator https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/OrcaSlicer_profile_validator_Linux_Ubuntu2404_nightly
           chmod +x ./OrcaSlicer_profile_validator
 
-      # validate profiles
+      # Validate all system profiles.
       - name: validate system profiles
         id: validate_system
         continue-on-error: true
@@ -63,11 +50,101 @@ jobs:
         continue-on-error: true
         working-directory: ${{ github.workspace }}
         run: |
-          set +e
-          curl -LJO https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
-          unzip -q ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_custom.log
-          exit ${PIPESTATUS[0]}
+          fixtures_dir="${{ runner.temp }}/profile-fixtures"
+          output_dir="${{ runner.temp }}/custom-preset-validation"
+          combined_log="${{ runner.temp }}/validate_custom.log"
+          summary="${output_dir}/summary.md"
+          release_url="https://github.com/OrcaSlicer/OrcaSlicer-profile-validator/releases/download/fixture-archive"
+
+          rm -rf "${fixtures_dir}" "${output_dir}"
+          mkdir -p "${fixtures_dir}" "${output_dir}"
+
+          curl -fsSL -o "${fixtures_dir}/manifest.json" "${release_url}/manifest.json"
+
+          MANIFEST_PATH="${fixtures_dir}/manifest.json" python3 <<'PY' > "${fixtures_dir}/fixtures.tsv"
+          import json
+          import os
+
+          with open(os.environ["MANIFEST_PATH"], encoding="utf-8") as fh:
+              manifest = json.load(fh)
+
+          if isinstance(manifest, dict):
+              entries = manifest.get("fixtures", [])
+          else:
+              entries = manifest
+
+          for entry in entries:
+              version = entry.get("version", "")
+              asset = entry.get("asset", "")
+              sha256 = entry.get("asset_sha256", "")
+              if not version or not asset:
+                  continue
+              print(f"{version}\t{asset}\t{sha256}")
+          PY
+
+          if [ ! -s "${fixtures_dir}/fixtures.tsv" ]; then
+            echo "No custom preset fixtures found in ${release_url}/manifest.json" | tee "${combined_log}"
+            exit 1
+          fi
+
+          {
+            echo "## Custom Preset Fixture Validation"
+            echo ""
+            echo "| Version | Status | Log |"
+            echo "| --- | --- | --- |"
+          } > "${summary}"
+
+          status=0
+          failed_logs=()
+
+          while IFS=$'\t' read -r version asset expected_sha256; do
+            fixture_zip="${fixtures_dir}/${asset}"
+            asset_url_name="$(python3 -c 'import sys, urllib.parse; print(urllib.parse.quote(sys.argv[1], safe=""))' "${asset}")"
+            profile_tree="${output_dir}/profiles-${version}"
+            log_path="${output_dir}/${version}.log"
+
+            curl -fsSL -o "${fixture_zip}" "${release_url}/${asset_url_name}"
+
+            if [ -n "${expected_sha256}" ] && [ "${expected_sha256}" != "<sha256>" ]; then
+              echo "${expected_sha256}  ${fixture_zip}" | sha256sum -c -
+            fi
+
+            rm -rf "${profile_tree}"
+            mkdir -p "${profile_tree}"
+            cp -a "${{ github.workspace }}/resources/profiles/." "${profile_tree}/"
+            rm -rf "${profile_tree}/user"
+            unzip -q "${fixture_zip}" -d "${profile_tree}"
+
+            set +e
+            ./OrcaSlicer_profile_validator -p "${profile_tree}" -l 2 > "${log_path}" 2>&1
+            result=$?
+            set -e
+
+            if [ "${result}" -eq 0 ]; then
+              echo "| ${version} | PASS | ${version}.log |" >> "${summary}"
+            else
+              echo "| ${version} | FAIL | ${version}.log |" >> "${summary}"
+              failed_logs+=("${log_path}")
+              status=1
+            fi
+          done < "${fixtures_dir}/fixtures.tsv"
+
+          {
+            cat "${summary}"
+            if [ "${#failed_logs[@]}" -gt 0 ]; then
+              echo ""
+              echo "## Failed Fixture Logs"
+              for log_path in "${failed_logs[@]}"; do
+                echo ""
+                echo "### $(basename "${log_path}" .log)"
+                echo '```'
+                head -c 12000 "${log_path}" || echo "No output captured"
+                echo '```'
+              done
+            fi
+          } | tee "${combined_log}"
+
+          exit "${status}"
 
       - name: Prepare PR number for comment workflow
         if: ${{ always() && github.event_name == 'pull_request' }}

.github/workflows/check_profiles_comment.yml

@@ -2,11 +2,7 @@ name: Post profile check comment
 
 # NOTE: The workflow name in the 'workflows' filter below must match the 'name'
 # field in check_profiles.yml exactly. If that name changes, update it here too.
-on:
-  workflow_run:
-    workflows: ["Check profiles"]
-    types:
-      - completed
+on: {}
 
 permissions:
   pull-requests: write

.github/workflows/dedupe-issues.yml

@@ -1,14 +1,6 @@
 name: Orca Issue Dedupe
 description: Automatically dedupe GitHub issues using AI
-on:
-  issues:
-    types: [opened]
-  workflow_dispatch:
-    inputs:
-      issue_number:
-        description: 'Issue number to process for duplicate detection'
-        required: true
-        type: string
+on: {}
 
 jobs:
   dedupe-issues:

.github/workflows/doxygen-docs.yml

@@ -1,9 +1,6 @@
 name: Generate Doxygen Documentation
 
-on:
-  schedule:
-    - cron: '0 0 * * 1'  # Every Monday at midnight UTC
-  workflow_dispatch:      # Manual trigger
+on: {}
 
 concurrency:
   group: ${{ github.workflow }}

.github/workflows/pr-label-bot.yml

@@ -1,13 +1,6 @@
 name: PR Label Bot
 
-on:
-  pull_request_target:
-    types:
-      - opened
-      - reopened
-  issue_comment:
-    types:
-      - created
+on: {}
 
 permissions:
   contents: read

.github/workflows/publish_release.yml

@@ -9,17 +9,7 @@ name: Publish to draft release
 # `RELEASE_PUBLISHER` repo variable (set to "SoftFever"). To allow someone else,
 # change that variable: gh variable set RELEASE_PUBLISHER --body "<login>".
 
-on:
-  workflow_dispatch:
-    inputs:
-      run_id:
-        description: 'Run ID of the "Build all" workflow to pull binaries from (the number in the Actions run URL)'
-        required: true
-        type: string
-      tag:
-        description: 'Tag of the draft release to upload to (e.g. v2.4.0)'
-        required: true
-        type: string
+on: {}
 
 permissions:
   contents: write   # upload release assets

.github/workflows/shellcheck.yml

@@ -1,15 +1,4 @@
-on:
-  push:
-    paths:
-      - '**.sh'
-      - 'scripts/linux.d/*'
-  pull_request:
-    paths:
-      - '**.sh'
-      - 'scripts/linux.d/*'
-  schedule:
-      - cron: '55 7 * * *' # run once a day near midnight US Pacific time
-  workflow_dispatch: # allows for manual dispatch
+on: {}
 
 name: "Shellcheck"
 permissions: {}

.github/workflows/update-translation.yml

@@ -1,8 +1,5 @@
 name: Update Translation Catalog
-on: 
-  # schedule:
-  #   - cron: 0 0 * * 1
-  workflow_dispatch:
+on: {}
 
 jobs:
   update_translation:

.github/workflows/winget_updater.yml

@@ -1,7 +1,6 @@
 name: Publish to WinGet
-on:
-  release:
-    types: [ released ]
+on: {}
+
 jobs:
   publish:
     runs-on: windows-latest

README.md

@@ -1,237 +1,59 @@
-<div align="center">
+# OrcaSlicer-KX
 
-<picture>
-  <img alt="OrcaSlicer logo" src="resources/images/OrcaSlicer.png" width="15%" height="15%">
-</picture>
+**OrcaSlicer mit KX-Bridge-Patches für den Anycubic Kobra X**
 
-<a href="https://trendshift.io/repositories/15552" target="_blank"><img src="https://trendshift.io/api/badge/repositories/15552" alt="OrcaSlicer%2FOrcaSlicer | Trendshift" style="width: 250px; height: 55px;" width="250" height="55"/></a>
+Fertige Binaries von [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) mit integrierten KX-spezifischen Erweiterungen — empfohlen für den Einsatz mit [KX-Bridge](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
 
-[![GitHub Repo stars](https://img.shields.io/github/stars/OrcaSlicer/OrcaSlicer)](https://github.com/OrcaSlicer/OrcaSlicer/stargazers) [![Build all](https://github.com/OrcaSlicer/OrcaSlicer/actions/workflows/build_all.yml/badge.svg?branch=main)](https://github.com/OrcaSlicer/OrcaSlicer/actions/workflows/build_all.yml)
+[![Download](https://img.shields.io/badge/Download-Releases-2EA043?style=for-the-badge&logo=gitea&logoColor=white)](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases)
 
-OrcaSlicer: an open source Next-Gen Slicing Software for Precision 3D Prints.  
-Optimize your prints with ultra-fast slicing, intelligent support generation, and seamless printer compatibility—engineered for perfection.
-<h3>
+---
 
-# Official links and community
+## Download
 
-#### Official Website:
+Aktuelle Version: **2.4.2-kx1** (Basis: OrcaSlicer 2.4.2 stable)
 
-<a href="https://www.orcaslicer.com/" style="font-size:2em;">OrcaSlicer.com</a>
+| Plattform | Datei | Hinweis |
+|-----------|-------|---------|
+| Linux x86_64 | `OrcaSlicer-KX-Linux-x86_64.AppImage` | `chmod +x` setzen, dann starten |
+| Windows x86_64 | `OrcaSlicer-KX-Windows-x86_64.zip` | Entpacken, `orca-slicer.exe` starten |
 
-#### Github Repository:
+macOS wird nicht bereitgestellt — bitte aus dem Upstream selbst bauen.
 
-<a href="https://github.com/OrcaSlicer/OrcaSlicer"><img src="https://img.shields.io/badge/OrcaSlicer-181717?style=flat&logo=github&logoColor=white" width="200" alt="GitHub Logo"/> </a>
+---
 
-#### Follow us:
+## Enthaltene Patches
 
-<a href="https://twitter.com/real_OrcaSlicer"><img src="https://img.shields.io/badge/real__OrcaSlicer-000000?style=flat&logo=x&logoColor=white" width="200" alt="X Logo"/> </a>  
-<a href="https://www.youtube.com/@OfficialOrcaSlicer"><img src="https://img.shields.io/badge/OfficialOrcaSlicer-FF0000?style=flat&logo=youtube&logoColor=white" width="200" alt="YouTube Logo"/> </a>
+- **Moonraker-Bridge:** mehrstufiges Filament-Matching (Name, Sub-Brand, Vendor-Fallback) mit Vendor-Filter-Skip
+- **AMS-Leerslot-Fix:** leere AMS-Slots werden korrekt grau dargestellt (kein Absturz / falsches Filament)
+- **Filament-ID:** eindeutige `filament_id` für abgeleitete User-Presets (korrekte Bridge-Synchronisation)
+- **Kobra X Profile:** Drucker- und G-Code-Profile für den Anycubic Kobra X
+- **Kobra X Bett-Temp-Fix:** `bed_temperature_formula` auf `by_first_filament` gesetzt — G9111-Makro heizt jetzt auf die korrekte Temperatur des gedruckten Filaments statt auf den Höchstwert aller Projekt-Filamente
 
-#### Join our Discord community:
+---
 
-<a href="https://discord.gg/P4VE9UY9gJ"><img src="https://img.shields.io/badge/-Discord-5865F2?style=flat&logo=discord&logoColor=fff" width="200" alt="discord logo"/> </a>
+## Filament-Presets & KX-Bridge
 
-<table border="2" style="border-color: #ffa500; background-color:rgb(232, 220, 180); color: #856404;">
-<tr>
-<td>
-<strong>⚠️ CAUTION:</strong><br>
-Several clickbait and malicious websites, such as <b>orca-slicer[.]com</b> and <b>orcaslicer[.]net</b>, are pretending to be the official OrcaSlicer site. These sites may redirect you to dangerous downloads or contain misleading information.<br>
-<b>Our only official website is <a href="https://www.orcaslicer.com/">www.orcaslicer.com</a>.</b><br><br>
-If you come across any of these in search results, please <b>report them</b> as unsafe or phishing to help keep the community secure with:<br>
- - <a href="https://safebrowsing.google.com/safebrowsing/report_phish/">Google Safe Browsing</a><br>
- - <a href="https://www.microsoft.com/en-us/wdsi/support/report-unsafe-site">Microsoft Security Intelligence</a><br>
- - <a href="https://ipthreat.net/tools/reportphishing">IPThreat</a>
-</td>
-</tr>
-</table>
+📄 [Anleitung: eigene Filament-Presets erstellen, prüfen und importieren](https://gitea.it-drui.de/viewit/KX-Bridge-Release/src/branch/master/docs/filament-preset-bridge-guide.md)
 
-</div>
+---
 
-# Main features
+## Branch-Struktur
 
-- **[Advanced Calibration Tools](https://www.orcaslicer.com/wiki/calibration_guide)**  
-  Comprehensive suite: temperature towers, flow rate, retraction & more for optimal performance.
-- **[Precise Wall](https://www.orcaslicer.com/wiki/quality_settings_precision#precise-wall) and [Seam Control](https://www.orcaslicer.com/wiki/quality_settings_seam)**  
-  Adjust outer wall spacing and apply scarf seams to enhance print accuracy.
-- **[Sandwich Mode](https://www.orcaslicer.com/wiki/quality_settings_wall_and_surfaces#innerouterinner) and [Polyholes](https://www.orcaslicer.com/wiki/quality_settings_precision#polyholes) Support**  
-  Use varied infill [patterns](https://www.orcaslicer.com/wiki/strength_settings_patterns) and accurate hole shapes for improved clarity.
-- **[Overhang](https://www.orcaslicer.com/wiki/quality_settings_overhangs) and [Support Optimization](https://www.orcaslicer.com/wiki#support-settings)**  
-  Modify geometry for printable overhangs with precise support placement.
-- **[Granular Controls and Customization](https://www.orcaslicer.com/wiki#process-settings)**  
-  Fine-tune print speed, layer height, pressure, and temperature with precision.
-- **Network Printer Support**  
-  Seamless integration with Klipper, PrusaLink, and OctoPrint for remote control.
-- **[Mouse Ear Brims](https://www.orcaslicer.com/wiki/others_settings_brim) & [Adaptive Bed Mesh](https://www.orcaslicer.com/wiki/printer_basic_information_adaptive_bed_mesh)**  
-  Automatic brims and adaptive mesh calibration ensure consistent adhesion.
-- **User-Friendly Interface**  
-  Intuitive drag-and-drop design with pre-made profiles for popular printers.
-- **[Open-Source](https://github.com/OrcaSlicer/OrcaSlicer) & [Community Driven](https://discord.gg/P4VE9UY9gJ)**  
-  Regular updates fueled by continuous community contributions.
-- **Wide Printer Compatibility**  
-  Supports a broad range of printers: Bambu Lab, Prusa, Creality, Voron, and more.
-- Additional features can be found in the [change notes](https://github.com/OrcaSlicer/OrcaSlicer/releases/).
+| Branch | Version | Rolle |
+|--------|---------|-------|
+| `stable` / `kx-v2.4` | 2.4.1-kx1 | **aktuell stabil** |
+| `kx-v2.3` | 2.3.2-kx4 | eingefroren (Altstand) |
 
-# Wiki
+---
 
-The [wiki](https://www.orcaslicer.com/wiki) aims to provide a detailed explanation of the slicer settings, including how to maximize their use and how to calibrate and set up your printer.
+## Warum ein eigenes Repo?
 
-- **[Access the wiki here](https://www.orcaslicer.com/wiki)**
-- **[Contribute to the wiki](https://www.orcaslicer.com/wiki/how_to_wiki)**
+KX-Bridge selbst liegt unter [viewit/KX-Bridge-Release](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
+OrcaSlicer steht unter AGPL-3.0 — ein separates Repo hält Lizenzen, Quellherkunft und Update-Zyklen sauber getrennt.
 
-# Download
+---
 
-## Stable Release
+## Lizenz & Quelle
 
-📥 **[Download the Latest Stable Release](https://github.com/OrcaSlicer/OrcaSlicer/releases/latest)**  
-Visit our GitHub Releases page for the latest stable version of OrcaSlicer, recommended for most users.
-
-## Nightly Builds
-
-🌙 **[Download the Latest Nightly Build](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds)**  
-Explore the latest developments in OrcaSlicer with our nightly builds. Feedback on these versions is highly appreciated.
-
-# How to install
-
-## Windows
-
-Download the **Windows Installer exe**  for your preferred version from the [releases page](https://github.com/OrcaSlicer/OrcaSlicer/releases).
-
-- *For convenience there is also a portable build available.*
-    <details>
-    <summary>Troubleshooting</summary>
-
-  - *If you have troubles to run the build, you might need to install following runtimes:*
-  - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)
-    - [Details of this runtime](https://aka.ms/webview2)
-    - [Alternative Download Link Hosted by Microsoft](https://go.microsoft.com/fwlink/p/?LinkId=2124703)
-  - [vcredist2019_x64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)
-    - [Alternative Download Link Hosted by Microsoft](https://aka.ms/vs/17/release/vc_redist.x64.exe)
-    - This file may already be available on your computer if you've installed visual studio.  Check the following location: `%VCINSTALLDIR%Redist\MSVC\v142`
-    </details>
-
-Windows Package Manager
-
-```shell
-winget install --id=SoftFever.OrcaSlicer -e
-```
-
-## Mac
-
-1. Download the DMG for your computer: `arm64` version for Apple Silicon and `x86_64` for Intel CPU.
-2. Drag OrcaSlicer.app to Application folder.
-3. *If you want to run a build from a PR, you also need to follow the instructions below:*
-
-    <details>
-    <summary>Quarantine</summary>
-
-    - Option 1 (You only need to do this once. After that the app can be opened normally.):
-      - Step 1: Hold _cmd_ and right click the app, from the context menu choose **Open**.
-      - Step 2: A warning window will pop up, click _Open_
-
-    - Option 2:
-      Execute this command in terminal:
-
-      ```shell
-      xattr -dr com.apple.quarantine /Applications/OrcaSlicer.app
-      ```
-
-    - Option 3:
-        - Step 1: open the app, a warning window will pop up  
-            ![mac_cant_open](./SoftFever_doc/mac_cant_open.png)
-        - Step 2: in `System Settings` -> `Privacy & Security`, click `Open Anyway`:  
-            ![mac_security_setting](./SoftFever_doc/mac_security_setting.png)
-    </details>
-
-## Linux
-
-### Flathub (Recommended)
-
-OrcaSlicer is available through FlatHub:
-
-<a href='https://flathub.org/apps/com.orcaslicer.OrcaSlicer'><img width='240' alt='Download on Flathub' src='https://dl.flathub.org/assets/badges/flathub-badge-en.png'/></a>
-
-Install from the command line:
-
-```shell
-flatpak install flathub com.orcaslicer.OrcaSlicer
-flatpak run com.orcaslicer.OrcaSlicer
-```
-
-It can also be installed through graphical software managers (KDE Discover, GNOME Software, etc.) when Flathub is enabled. Search for **OrcaSlicer** in your software center.
-
-### AppImage
-
-AppImages are published for both **x86_64** and **aarch64** (ARM64). Pick the file matching your CPU — the ARM64 build has `aarch64` in its name (e.g. `OrcaSlicer_Linux_AppImage_Ubuntu2404_aarch64_*.AppImage`).
-
- 1. Download App image from the [releases page](https://github.com/OrcaSlicer/OrcaSlicer/releases).
- 2. Double click the downloaded file to run it.
-
- 3. If you run into trouble executing it, try this command in the terminal:
-    `chmod +x /path_to_appimage/OrcaSlicer_Linux.AppImage`
-
-# How to Compile
-
-All updated build instructions for Windows, macOS, and Linux are now available on the official [OrcaSlicer Wiki - How to build](https://www.orcaslicer.com/wiki/how_to_build) page.
-
-Please refer to the wiki to ensure you're following the latest and most accurate steps for your platform.
-
-# Klipper Note
-
-If you're running Klipper, it's recommended to add the following configuration to your `printer.cfg` file.
-
-```gcode
-# Enable object exclusion
-[exclude_object]
-
-# Enable arcs support
-[gcode_arcs]
-resolution: 0.1
-```
-
-# Supports
-
-**OrcaSlicer** is an open-source project and I'm deeply grateful to all my sponsors and backers.  
-Their generous support enables me to purchase filaments and other essential 3D printing materials for the project.  
-Thank you! :)
-
-## Sponsors
-
-<table>
-<tr>
-<td>
-<a href="https://qidi3d.com/" style="display:inline-block; border-radius:8px; background:#fff;">
-  <img src="SoftFever_doc\sponsor_logos\QIDI.png" alt="QIDI" width="100" height="100">
-</a>
-</td>
-<td>
-<a href="https://bigtree-tech.com/" style="display:inline-block; border-radius:8px; background:#222;">
-    <img src="SoftFever_doc\sponsor_logos\BigTreeTech.png" alt="BIGTREE TECH" width="100" height="100">
-</a>
-</td>
-</tr>
-</table>
-
-## Backers:
-
-**Ko-fi supporters** ☕: [Backers list](https://github.com/user-attachments/files/16147016/Supporters_638561417699952499.csv)
-
-## Support me
-
-<a href="https://github.com/sponsors/SoftFever"><img src="https://img.shields.io/badge/GitHub%20Sponsors-30363D?style=flat&logo=GitHub-Sponsors&logoColor=EA4AAA" height="50"></a>  
-<a href="https://ko-fi.com/G2G5IP3CP"><img src="https://img.shields.io/badge/Support_me_on_Ko--fi-FF5E5B?style=flat&logo=ko-fi&logoColor=white" height="50"></a>  
-<a href="https://paypal.me/softfever3d"><img src="https://img.shields.io/badge/PayPal-003087?style=flat&logo=paypal&logoColor=fff" height="50"></a>
-
-## Some Background
-
-Open-source slicing has always been built on a tradition of collaboration and attribution. [Slic3r](https://github.com/Slic3r/Slic3r), created by Alessandro Ranellucci and the RepRap community, laid the foundation. [PrusaSlicer](https://github.com/prusa3d/PrusaSlicer) by Prusa Research built on Slic3r and acknowledged that heritage. [Bambu Studio](https://github.com/bambulab/BambuStudio) in turn forked from PrusaSlicer, and [SuperSlicer](https://github.com/supermerill/SuperSlicer) by @supermerill extended PrusaSlicer with community-driven enhancements. Each project carried the work of its predecessors forward, crediting those who came before.
-
-OrcaSlicer began in that same spirit, drawing from BambuStudio, PrusaSlicer, and ideas inspired by CuraSlicer and SuperSlicer. But it has since grown far beyond its origins. Through relentless innovation — introducing advanced calibration tools, precise wall and seam control, tree supports, adaptive slicing, and hundreds of other features — OrcaSlicer has become the most widely used and actively developed open-source slicer in the 3D printing community. Many of its innovations have been adopted by other slicers, making it a driving force for the entire industry.
-
-The OrcaSlicer logo was designed by community member [Justin Levine](https://github.com/jal-co).
-
-# License
-
-- **OrcaSlicer** is licensed under the GNU Affero General Public License, version 3.
-- The **GNU Affero General Public License**, version 3 ensures that if you use any part of this software in any way (even behind a web server), your software must be released under the same license.
-- OrcaSlicer includes a **pressure advance calibration pattern test** adapted from Andrew Ellis' generator, which is licensed under GNU General Public License, version 3. Ellis' generator is itself adapted from a generator developed by Sineos for Marlin, which is licensed under GNU General Public License, version 3.
-- The **Bambu networking plugin** is based on non-free libraries from BambuLab. It is optional to the OrcaSlicer and provides extended functionalities for Bambulab printer users.
+Diese Builds sind Ableitungen von [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer), lizenziert unter **GNU AGPL-3.0**.
+Der KX-Patch-Quellcode liegt auf Branch [`kx-v2.4`](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/src/branch/kx-v2.4) dieses Repos.

docs/filament-preset-bridge-guide.md

@@ -0,0 +1,356 @@
+# Eigene Filament-Presets anlegen, prüfen und mit KX-Bridge verknüpfen
+
+> **Gilt für:** OrcaSlicer-KX v2.4.0-alpha-kx2 oder neuer
+
+---
+
+## Was ist die `filament_id` und warum ist sie wichtig?
+
+Jedes Filament-Preset in OrcaSlicer hat eine interne `filament_id`. Diese ID wird von der KX-Bridge genutzt, um beim AMS-Sync das richtige Preset zuzuordnen.
+
+- System-Presets (z.B. "Polymaker PolyTerra PLA") haben eine feste ID wie `GFL99` oder `OGFL04`.
+- **Eigene (User-)Presets** bekommen in OrcaSlicer-KX automatisch eine eindeutige ID, die mit `P` beginnt (z.B. `P3a7f2c1`).
+
+Ohne eindeutige ID zeigt OrcaSlicer beim Sync immer "Generic PLA" — auch wenn das Preset existiert.
+
+> **Achtung — abgeleitete Presets (Issue #52):** Wenn du dein Preset von einem **Hersteller-Preset** ableitest (z.B. "Anycubic PLA Matte"), übernimmt es zunächst die feste Hersteller-ID (z.B. `GFA001`). Beim Sync wird dann fälschlicherweise das Hersteller-Preset statt deines eigenen ausgewählt.
+> Ab OrcaSlicer-KX **v2.4.0-alpha-kx3** wird beim Speichern automatisch eine eigene `P...`-ID vergeben — auch für abgeleitete Presets. Hast du das Preset mit einer älteren Version angelegt, **öffne es einmal und speichere es erneut** (Save), damit die `P`-ID generiert wird.
+
+---
+
+## 1. Eigenes Filament-Preset anlegen
+
+1. OrcaSlicer-KX starten
+2. Rechts oben im **Filament-Dropdown** ein passendes Basis-Preset wählen (z.B. "Generic PLA" oder ein Hersteller-Preset)
+3. Einstellungen nach Wunsch anpassen (Temperaturen, Kühlung, etc.)
+4. Auf das **Speichern-Symbol** (Diskette) klicken → **"Save as new preset"**
+5. Namen eingeben — z.B. `SUNLU PLA+ 2.0`
+   > Der Name muss später exakt so in der Bridge eingetragen werden.
+6. Drucker auswählen: **Anycubic Kobra X 0.4 nozzle** — wichtig für die Kompatibilität!
+7. **Speichern** klicken
+8. OrcaSlicer **einmal neu starten** — erst dann wird die `filament_id` dauerhaft gespeichert.
+
+---
+
+## 2. Eindeutige ID prüfen
+
+Nach dem Neustart prüfen, ob die ID korrekt gesetzt wurde:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+Die Datei öffnen und nach `filament_id` suchen:
+
+```json
+{
+  "filament_id": "P3a7f2c1",
+  ...
+}
+```
+
+✅ Korrekt: ID beginnt mit `P` gefolgt von 7 Hex-Zeichen  
+❌ Fehlt oder leer: OrcaSlicer-KX zu alt — Update auf v2.4.0-alpha-kx2 oder neuer
+
+---
+
+## 3. Preset auf einen anderen PC übertragen (Import)
+
+### Exportieren (Quell-PC)
+
+Die Preset-Datei einfach kopieren:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+### Importieren (Ziel-PC)
+
+**Methode A — Datei direkt kopieren:**
+1. Die `.json`-Datei in das gleiche Verzeichnis auf dem Ziel-PC kopieren
+2. OrcaSlicer neu starten → Preset erscheint im Dropdown
+
+**Methode B — OrcaSlicer Import-Funktion:**
+1. In OrcaSlicer: **File → Import → Import Configs...**
+2. Die `.json`-Datei auswählen
+3. OrcaSlicer neu starten
+
+> **Wichtig:** Die `filament_id` in der Datei bleibt erhalten — das Preset wird auf dem Ziel-PC genauso erkannt wie auf dem Quell-PC.
+
+---
+
+## 4. Preset in KX-Bridge verknüpfen
+
+1. KX-Bridge UI öffnen
+2. **Filament-Verwaltung** → AMS-Slot auswählen
+3. Im Feld **Filament-Name** exakt den OrcaSlicer-Preset-Namen eintragen:
+   ```
+   SUNLU PLA+ 2.0
+   ```
+4. Speichern
+
+Die Bridge sendet beim Sync `filament_name: "SUNLU PLA+ 2.0"` → OrcaSlicer findet das Preset anhand von Name und `filament_id` → zeigt es korrekt an.
+
+---
+
+## Wichtige Hinweise
+
+| Was | Warum |
+|-----|-------|
+| Name in OrcaSlicer und Bridge müssen **exakt** übereinstimmen | Groß-/Kleinschreibung und Sonderzeichen werden verglichen |
+| Preset muss für **Anycubic Kobra X 0.4 nozzle** kompatibel sein | Beim Speichern den richtigen Drucker auswählen |
+| Nach dem ersten Speichern OrcaSlicer **neu starten** | Erst dann wird die `filament_id` persistent geschrieben |
+| **OrcaSlicer-KX v2.4.0-alpha-kx2** oder neuer verwenden | Ältere Versionen generieren keine eindeutige `filament_id` für User-Presets |
+| Bei von Hersteller-Presets abgeleiteten Presets: **v2.4.0-alpha-kx3** oder neuer | Erst ab dieser Version wird die geerbte Hersteller-ID beim Speichern durch eine eigene `P`-ID ersetzt (Issue #52) |
+
+---
+---
+
+# How to Create, Verify and Import Custom Filament Presets for KX-Bridge
+
+> **Requires:** OrcaSlicer-KX v2.4.0-alpha-kx2 or newer
+
+---
+
+## What is the `filament_id` and why does it matter?
+
+Every filament preset in OrcaSlicer has an internal `filament_id`. The KX-Bridge uses this ID to match the correct preset during AMS sync.
+
+- System presets (e.g. "Polymaker PolyTerra PLA") have a fixed ID like `GFL99` or `OGFL04`.
+- **Custom (user) presets** automatically receive a unique ID starting with `P` (e.g. `P3a7f2c1`) in OrcaSlicer-KX.
+
+Without a unique ID, OrcaSlicer will always show "Generic PLA" during sync — even if the preset exists.
+
+> **Caution — derived presets (Issue #52):** If you derive your preset from a **vendor preset** (e.g. "Anycubic PLA Matte"), it initially inherits the fixed vendor ID (e.g. `GFA001`). During sync the vendor preset is then incorrectly selected instead of your own.
+> As of OrcaSlicer-KX **v2.4.0-alpha-kx3**, a unique `P...` ID is generated automatically on save — including for derived presets. If you created the preset with an older version, **open it once and save it again** so the `P` ID gets generated.
+
+---
+
+## 1. Create a Custom Filament Preset
+
+1. Launch OrcaSlicer-KX
+2. Select a suitable base preset from the **filament dropdown** (e.g. "Generic PLA" or a vendor preset)
+3. Adjust settings as needed (temperatures, cooling, etc.)
+4. Click the **save icon** (floppy disk) → **"Save as new preset"**
+5. Enter a name — e.g. `SUNLU PLA+ 2.0`
+   > This name must be entered in the bridge exactly as typed here.
+6. Select printer: **Anycubic Kobra X 0.4 nozzle** — required for compatibility!
+7. Click **Save**
+8. **Restart OrcaSlicer once** — the `filament_id` is only written permanently after a restart.
+
+---
+
+## 2. Verify the Unique ID
+
+After restarting, check that the ID was set correctly:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+Open the file and look for `filament_id`:
+
+```json
+{
+  "filament_id": "P3a7f2c1",
+  ...
+}
+```
+
+✅ Correct: ID starts with `P` followed by 7 hex characters  
+❌ Missing or empty: Your OrcaSlicer-KX version is too old — update to v2.4.0-alpha-kx2 or newer
+
+---
+
+## 3. Transfer a Preset to Another PC (Import)
+
+### Export (source PC)
+
+Simply copy the preset file:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+### Import (target PC)
+
+**Method A — Copy file directly:**
+1. Copy the `.json` file to the same directory on the target PC
+2. Restart OrcaSlicer → preset appears in the dropdown
+
+**Method B — OrcaSlicer import function:**
+1. In OrcaSlicer: **File → Import → Import Configs...**
+2. Select the `.json` file
+3. Restart OrcaSlicer
+
+> **Note:** The `filament_id` inside the file is preserved — the preset will be recognized on the target PC exactly as on the source PC.
+
+---
+
+## 4. Link the Preset in KX-Bridge
+
+1. Open the KX-Bridge UI
+2. Go to **Filament Management** → select the AMS slot
+3. In the **Filament Name** field, enter the OrcaSlicer preset name exactly:
+   ```
+   SUNLU PLA+ 2.0
+   ```
+4. Save
+
+The bridge sends `filament_name: "SUNLU PLA+ 2.0"` during sync → OrcaSlicer matches by name and `filament_id` → displays the preset correctly.
+
+---
+
+## Quick Reference
+
+| What | Why |
+|------|-----|
+| Name in OrcaSlicer and Bridge must match **exactly** | Case and special characters are compared |
+| Preset must be compatible with **Anycubic Kobra X 0.4 nozzle** | Select the correct printer when saving |
+| **Restart OrcaSlicer** after saving for the first time | The `filament_id` is only written persistently after a restart |
+| Use **OrcaSlicer-KX v2.4.0-alpha-kx2** or newer | Older versions do not generate a unique `filament_id` for user presets |
+| For presets derived from vendor presets: **v2.4.0-alpha-kx3** or newer | Only from this version is the inherited vendor ID replaced with a unique `P` ID on save (Issue #52) |
+
+---
+---
+
+# Cómo crear, verificar e importar perfiles de filamento personalizados para KX-Bridge
+
+> **Requiere:** OrcaSlicer-KX v2.4.0-alpha-kx2 o superior
+
+---
+
+## ¿Qué es el `filament_id` y por qué es importante?
+
+Cada perfil de filamento en OrcaSlicer tiene un `filament_id` interno. KX-Bridge usa este ID para asignar el perfil correcto durante la sincronización AMS.
+
+- Los perfiles del sistema (p. ej. "Polymaker PolyTerra PLA") tienen un ID fijo como `GFL99` o `OGFL04`.
+- Los **perfiles personalizados (usuario)** reciben automáticamente un ID único que empieza por `P` (p. ej. `P3a7f2c1`) en OrcaSlicer-KX.
+
+Sin un ID único, OrcaSlicer mostrará siempre "Generic PLA" durante la sincronización, aunque el perfil exista.
+
+> **Atención — perfiles derivados (Issue #52):** Si derivas tu perfil de un **perfil de fabricante** (p. ej. "Anycubic PLA Matte"), inicialmente hereda el ID fijo del fabricante (p. ej. `GFA001`). Durante la sincronización se selecciona entonces por error el perfil del fabricante en lugar del tuyo.
+> A partir de OrcaSlicer-KX **v2.4.0-alpha-kx3**, se genera automáticamente un ID `P...` único al guardar — también para perfiles derivados. Si creaste el perfil con una versión anterior, **ábrelo una vez y vuelve a guardarlo** (Save) para que se genere el ID `P`.
+
+---
+
+## 1. Crear un perfil de filamento personalizado
+
+1. Iniciar OrcaSlicer-KX
+2. Seleccionar un perfil base adecuado en el **menú desplegable de filamento** (p. ej. "Generic PLA" o un perfil de fabricante)
+3. Ajustar la configuración según sea necesario (temperaturas, refrigeración, etc.)
+4. Hacer clic en el **icono de guardar** (disquete) → **"Save as new preset"**
+5. Introducir un nombre — p. ej. `SUNLU PLA+ 2.0`
+   > Este nombre debe introducirse en la bridge exactamente igual.
+6. Seleccionar impresora: **Anycubic Kobra X 0.4 nozzle** — ¡necesario para la compatibilidad!
+7. Hacer clic en **Guardar**
+8. **Reiniciar OrcaSlicer una vez** — el `filament_id` solo se escribe de forma permanente tras un reinicio.
+
+---
+
+## 2. Verificar el ID único
+
+Tras reiniciar, comprobar que el ID se ha establecido correctamente:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+Abrir el archivo y buscar `filament_id`:
+
+```json
+{
+  "filament_id": "P3a7f2c1",
+  ...
+}
+```
+
+✅ Correcto: el ID empieza por `P` seguido de 7 caracteres hexadecimales  
+❌ Falta o está vacío: la versión de OrcaSlicer-KX es demasiado antigua — actualizar a v2.4.0-alpha-kx2 o superior
+
+---
+
+## 3. Transferir un perfil a otro PC (importar)
+
+### Exportar (PC de origen)
+
+Simplemente copiar el archivo del perfil:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+### Importar (PC de destino)
+
+**Método A — Copiar el archivo directamente:**
+1. Copiar el archivo `.json` al mismo directorio en el PC de destino
+2. Reiniciar OrcaSlicer → el perfil aparece en el menú desplegable
+
+**Método B — Función de importación de OrcaSlicer:**
+1. En OrcaSlicer: **File → Import → Import Configs...**
+2. Seleccionar el archivo `.json`
+3. Reiniciar OrcaSlicer
+
+> **Nota:** El `filament_id` dentro del archivo se conserva — el perfil se reconocerá en el PC de destino exactamente igual que en el de origen.
+
+---
+
+## 4. Vincular el perfil en KX-Bridge
+
+1. Abrir la interfaz de KX-Bridge
+2. Ir a **Gestión de filamentos** → seleccionar la ranura AMS
+3. En el campo **Nombre de filamento**, introducir el nombre exacto del perfil de OrcaSlicer:
+   ```
+   SUNLU PLA+ 2.0
+   ```
+4. Guardar
+
+La bridge envía `filament_name: "SUNLU PLA+ 2.0"` durante la sincronización → OrcaSlicer busca por nombre y `filament_id` → muestra el perfil correctamente.
+
+---
+
+## Referencia rápida
+
+| Qué | Por qué |
+|-----|---------|
+| El nombre en OrcaSlicer y en Bridge debe coincidir **exactamente** | Se comparan mayúsculas, minúsculas y caracteres especiales |
+| El perfil debe ser compatible con **Anycubic Kobra X 0.4 nozzle** | Seleccionar la impresora correcta al guardar |
+| **Reiniciar OrcaSlicer** tras guardar por primera vez | El `filament_id` solo se escribe de forma permanente tras un reinicio |
+| Usar **OrcaSlicer-KX v2.4.0-alpha-kx2** o superior | Las versiones anteriores no generan un `filament_id` único para perfiles de usuario |
+| Para perfiles derivados de perfiles de fabricante: **v2.4.0-alpha-kx3** o superior | Solo a partir de esta versión se reemplaza el ID heredado del fabricante por un ID `P` único al guardar (Issue #52) |

resources/profiles/Afinia.json

@@ -1,6 +1,6 @@
 {
 	"name": "Afinia",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Afinia configurations",
 	"machine_model_list": [
@@ -124,14 +124,6 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
-		{
-			"name": "Afinia ABS",
-			"sub_path": "filament/Afinia ABS.json"
-		},
-		{
-			"name": "Afinia ABS+",
-			"sub_path": "filament/Afinia ABS+.json"
-		},
 		{
 			"name": "Afinia ABS+@HS",
 			"sub_path": "filament/Afinia ABS+@HS.json"
@@ -140,34 +132,18 @@
 			"name": "Afinia ABS@HS",
 			"sub_path": "filament/Afinia ABS@HS.json"
 		},
-		{
-			"name": "Afinia Value ABS",
-			"sub_path": "filament/Afinia Value ABS.json"
-		},
 		{
 			"name": "Afinia Value ABS@HS",
 			"sub_path": "filament/Afinia Value ABS@HS.json"
 		},
-		{
-			"name": "Afinia PLA",
-			"sub_path": "filament/Afinia PLA.json"
-		},
 		{
 			"name": "Afinia PLA@HS",
 			"sub_path": "filament/Afinia PLA@HS.json"
 		},
-		{
-			"name": "Afinia Value PLA",
-			"sub_path": "filament/Afinia Value PLA.json"
-		},
 		{
 			"name": "Afinia Value PLA@HS",
 			"sub_path": "filament/Afinia Value PLA@HS.json"
 		},
-		{
-			"name": "Afinia TPU",
-			"sub_path": "filament/Afinia TPU.json"
-		},
 		{
 			"name": "Afinia TPU@HS",
 			"sub_path": "filament/Afinia TPU@HS.json"

resources/profiles/Afinia/filament/Afinia ABS+.json

@@ -1,37 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFB00",
-	"setting_id": "i5tf9foHnTVNmA2r",
-	"name": "Afinia ABS+",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_abs",
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"nozzle_temperature": [
-		"275"
-	],
-	"nozzle_temperature_initial_layer": [
-		"275"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia ABS.json

@@ -1,31 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFB00",
-	"setting_id": "LhDHvMepbh8ecfQT",
-	"name": "Afinia ABS",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_abs",
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia PLA.json

@@ -1,34 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFA00",
-	"setting_id": "1qEFsay7kjYIUkpG",
-	"name": "Afinia PLA",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"21"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia TPU.json

@@ -1,28 +0,0 @@
-{
-	"type": "filament",
-	"name": "Afinia TPU",
-	"inherits": "fdm_filament_tpu",
-	"from": "system",
-	"setting_id": "E7WBTARZ971LaDMj",
-	"filament_id": "GFU01",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Afinia"
-	],
-	"filament_density": [
-		"1.22"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"filament_cost": [
-		"41.99"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia Value ABS.json

@@ -1,37 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFB00",
-	"setting_id": "jEYVpOPBjFtQ0DXn",
-	"name": "Afinia Value ABS",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_abs",
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"nozzle_temperature": [
-		"245"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia Value PLA.json

@@ -1,40 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFA00",
-	"setting_id": "oNBk0IxmW7C99WI3",
-	"name": "Afinia Value PLA",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"21"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"nozzle_temperature": [
-		"190"
-	],
-	"nozzle_temperature_initial_layer": [
-		"190"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Anker/process/0.20mm Optimal 0.6 nozzle @Anker.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Optimal 0.6 nozzle @Anker",
+	"renamed_from": "0.20mm Optimal 0.6 nozzle @Anker.json",
 	"inherits": "fdm_process_anker_common_0_6",
 	"from": "system",
 	"setting_id": "re5qmcOFJ1OJP3Ip",

resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json

@@ -124,6 +124,7 @@
 		"0"
 	],
 	"machine_pause_gcode": "M600",
+	"bed_temperature_formula": "by_first_filament",
 	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
 	"machine_tool_change_time": "0",
 	"machine_unload_filament_time": "0",

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.01.00.18",
+	"version": "02.01.00.19",
 	"force_update": "0",
 	"description": "BBL configurations",
 	"machine_model_list": [
@@ -2177,6 +2177,10 @@
 			"name": "Generic ABS @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic ABS @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth ABS rABS",
+			"sub_path": "filament/addnorth/addnorth ABS rABS.json"
+		},
 		{
 			"name": "PolyLite ABS @BBL A1",
 			"sub_path": "filament/Polymaker/PolyLite ABS @BBL A1.json"
@@ -3005,6 +3009,22 @@
 			"name": "Generic PA @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PA @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PA Adura",
+			"sub_path": "filament/addnorth/addnorth PA Adura.json"
+		},
+		{
+			"name": "addnorth PA Adura FDA",
+			"sub_path": "filament/addnorth/addnorth PA Adura FDA.json"
+		},
+		{
+			"name": "addnorth PA6 Addlantis",
+			"sub_path": "filament/addnorth/addnorth PA6 Addlantis.json"
+		},
+		{
+			"name": "addnorth PVDF Adamant S1",
+			"sub_path": "filament/addnorth/addnorth PVDF Adamant S1.json"
+		},
 		{
 			"name": "Generic PA-CF",
 			"sub_path": "filament/Generic PA-CF.json"
@@ -3029,6 +3049,10 @@
 			"name": "Generic PA-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PA-CF @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PA-CF Adura X",
+			"sub_path": "filament/addnorth/addnorth PA-CF Adura X.json"
+		},
 		{
 			"name": "Bambu PC @BBL A1",
 			"sub_path": "filament/Bambu PC @BBL A1.json"
@@ -3329,6 +3353,10 @@
 			"name": "Generic PC @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PC @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PC BLend HT LCF",
+			"sub_path": "filament/addnorth/addnorth PC BLend HT LCF.json"
+		},
 		{
 			"name": "Generic PCTG @BBL A1",
 			"sub_path": "filament/Generic PCTG @BBL A1.json"
@@ -4185,6 +4213,30 @@
 			"name": "Generic PETG @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PETG @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PETG Base",
+			"sub_path": "filament/addnorth/addnorth PETG Base.json"
+		},
+		{
+			"name": "addnorth PETG ESD",
+			"sub_path": "filament/addnorth/addnorth PETG ESD.json"
+		},
+		{
+			"name": "addnorth PETG Economy",
+			"sub_path": "filament/addnorth/addnorth PETG Economy.json"
+		},
+		{
+			"name": "addnorth PETG Flame v0",
+			"sub_path": "filament/addnorth/addnorth PETG Flame v0.json"
+		},
+		{
+			"name": "addnorth PETG PRO Matte",
+			"sub_path": "filament/addnorth/addnorth PETG PRO Matte.json"
+		},
+		{
+			"name": "addnorth PETG rPETG Matte",
+			"sub_path": "filament/addnorth/addnorth PETG rPETG Matte.json"
+		},
 		{
 			"name": "Generic PETG HF @BBL A1",
 			"sub_path": "filament/Generic PETG HF @BBL A1.json"
@@ -4305,6 +4357,10 @@
 			"name": "Generic PETG-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PETG-CF Rigid X",
+			"sub_path": "filament/addnorth/addnorth PETG-CF Rigid X.json"
+		},
 		{
 			"name": "PolyLite PETG @BBL A1",
 			"sub_path": "filament/Polymaker/PolyLite PETG @BBL A1.json"
@@ -6589,6 +6645,34 @@
 			"name": "Generic PLA @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PLA E-PLA",
+			"sub_path": "filament/addnorth/addnorth PLA E-PLA.json"
+		},
+		{
+			"name": "addnorth PLA Economy",
+			"sub_path": "filament/addnorth/addnorth PLA Economy.json"
+		},
+		{
+			"name": "addnorth PLA HT-PLA PRO Matte",
+			"sub_path": "filament/addnorth/addnorth PLA HT-PLA PRO Matte.json"
+		},
+		{
+			"name": "addnorth PLA Textura",
+			"sub_path": "filament/addnorth/addnorth PLA Textura.json"
+		},
+		{
+			"name": "addnorth PLA Wood",
+			"sub_path": "filament/addnorth/addnorth PLA Wood.json"
+		},
+		{
+			"name": "addnorth PLA X-PLA",
+			"sub_path": "filament/addnorth/addnorth PLA X-PLA.json"
+		},
+		{
+			"name": "addnorth PLA rPLA RE-ADD",
+			"sub_path": "filament/addnorth/addnorth PLA rPLA RE-ADD.json"
+		},
 		{
 			"name": "Generic PLA High Speed @BBL A1",
 			"sub_path": "filament/Generic PLA High Speed @BBL A1.json"
@@ -6649,6 +6733,10 @@
 			"name": "Generic PLA High Speed @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PLA X-PLA High Speed",
+			"sub_path": "filament/addnorth/addnorth PLA X-PLA High Speed.json"
+		},
 		{
 			"name": "Generic PLA Silk",
 			"sub_path": "filament/Generic PLA Silk.json"
@@ -6689,6 +6777,10 @@
 			"name": "Generic PLA Silk @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PLA Premium Silk",
+			"sub_path": "filament/addnorth/addnorth PLA Premium Silk.json"
+		},
 		{
 			"name": "Generic PLA-CF",
 			"sub_path": "filament/Generic PLA-CF.json"
@@ -6729,6 +6821,10 @@
 			"name": "Generic PLA-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PLA-CF Carbon Fiber",
+			"sub_path": "filament/addnorth/addnorth PLA-CF Carbon Fiber.json"
+		},
 		{
 			"name": "Numakers PLA+ @BBL A1",
 			"sub_path": "filament/Numakers/Numakers PLA+ @BBL A1.json"
@@ -6981,10 +7077,6 @@
 			"name": "Panchroma PLA @BBL X1C 0.2 nozzle",
 			"sub_path": "filament/Polymaker/Panchroma PLA @BBL X1C 0.2 nozzle.json"
 		},
-		{
-			"name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle",
-			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json"
-		},
 		{
 			"name": "Panchroma PLA Celestial @BBL A1",
 			"sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL A1.json"
@@ -7381,6 +7473,10 @@
 			"name": "Panchroma PLA Silk @BBL X1C",
 			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C.json"
 		},
+		{
+			"name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle",
+			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json"
+		},
 		{
 			"name": "Panchroma PLA Starlight @BBL A1",
 			"sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL A1.json"
@@ -8889,6 +8985,18 @@
 			"name": "Generic TPU @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic TPU @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth TPU EasyFlex",
+			"sub_path": "filament/addnorth/addnorth TPU EasyFlex.json"
+		},
+		{
+			"name": "addnorth TPU Pro Matte 85A",
+			"sub_path": "filament/addnorth/addnorth TPU Pro Matte 85A.json"
+		},
+		{
+			"name": "addnorth TPU Pro Matte 95A",
+			"sub_path": "filament/addnorth/addnorth TPU Pro Matte 95A.json"
+		},
 		{
 			"name": "Generic TPU for AMS @BBL A1",
 			"sub_path": "filament/Generic TPU for AMS @BBL A1.json"

resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Bambu PLA Tough @BBL X1C",
+	"renamed_from": "Bambu PLA Impact @BBL X1C",
 	"inherits": "Bambu PLA Tough @base",
 	"from": "system",
 	"setting_id": "GFSA09_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1",
+	"renamed_from": "Panchroma PLA Stain @BBL A1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_00",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1M",
+	"renamed_from": "Panchroma PLA Stain @BBL A1M",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL P1P",
+	"renamed_from": "Panchroma PLA Stain @BBL P1P",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_04",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL X1",
+	"renamed_from": "Panchroma PLA Stain @BBL X1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_06",

resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth ABS rABS",
+	"inherits": "Generic ABS @base",
+	"from": "system",
+	"setting_id": "GF_ANRA_00",
+	"filament_id": "GF_ANRA",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"25"
+	],
+	"fan_min_speed": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"200"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"43"
+	],
+	"filament_density": [
+		"1.03"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth ABS rABS"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"105"
+	],
+	"hot_plate_temp_initial_layer": [
+		"105"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"255",
+		"255"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250",
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"50"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"105"
+	],
+	"textured_plate_temp_initial_layer": [
+		"105"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PA Adura FDA",
+	"inherits": "Generic PA @base",
+	"from": "system",
+	"setting_id": "GF_ANAF_00",
+	"filament_id": "GF_ANAF",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.99",
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"11"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PA Adura FDA"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"0.4",
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"265",
+		"265"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265",
+		"265"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"245"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PA Adura",
+	"inherits": "Generic PA @base",
+	"from": "system",
+	"setting_id": "GF_ANAD_00",
+	"filament_id": "GF_ANAD",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.99",
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"11"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PA Adura"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"0.4",
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"265",
+		"265"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265",
+		"265"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"245"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PA-CF Adura X",
+	"inherits": "Generic PA-CF @base",
+	"from": "system",
+	"setting_id": "GF_ANAX_00",
+	"filament_id": "GF_ANAX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"109"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.99",
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"15"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PA-CF Adura X"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"280",
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275",
+		"275"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"260"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"120"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PA6 Addlantis",
+	"inherits": "Generic PA @base",
+	"from": "system",
+	"setting_id": "GF_ANLA_00",
+	"filament_id": "GF_ANLA",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"82"
+	],
+	"filament_density": [
+		"1.18"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.99",
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"11"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.62 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PA6 Addlantis"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PA6"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"0.4",
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"275",
+		"275"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275",
+		"275"
+	],
+	"nozzle_temperature_range_high": [
+		"285"
+	],
+	"nozzle_temperature_range_low": [
+		"265"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"15"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PC BLend HT LCF",
+	"inherits": "Generic PC @base",
+	"from": "system",
+	"setting_id": "GF_ANPBX_00",
+	"filament_id": "GF_ANPBX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"109"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"15",
+		"15"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PC BLend HT LCF"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PC"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"285",
+		"285"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275",
+		"275"
+	],
+	"nozzle_temperature_range_high": [
+		"290"
+	],
+	"nozzle_temperature_range_low": [
+		"265"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"185"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG Base",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANPE_00",
+	"filament_id": "GF_ANPE",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"35.6"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG Base"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255",
+		"255"
+	],
+	"nozzle_temperature_range_high": [
+		"275"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG ESD",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANEG_00",
+	"filament_id": "GF_ANEG",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"76"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.97",
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"20"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 high reliability - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG ESD"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"290",
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290",
+		"290"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"255"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG Economy",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANGE_00",
+	"filament_id": "GF_ANGE",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"27"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG Economy"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255",
+		"255"
+	],
+	"nozzle_temperature_range_high": [
+		"275"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG Flame v0",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANPF_00",
+	"filament_id": "GF_ANPF",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"71"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.97",
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"20"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.4 high reliability - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG Flame V0"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"290",
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290",
+		"290"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"255"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG PRO Matte",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANPM_00",
+	"filament_id": "GF_ANPM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"54.5"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG PRO Matte"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"275"
+	],
+	"nozzle_temperature_range_low": [
+		"235"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"1"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG rPETG Matte",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANRM_00",
+	"filament_id": "GF_ANRM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"36"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG rPETG Matte"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255",
+		"255"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"225"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG-CF Rigid X",
+	"inherits": "Generic PETG-CF @base",
+	"from": "system",
+	"setting_id": "GF_ANRX_00",
+	"filament_id": "GF_ANRX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"5"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"82"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"11"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026 – Special thanks to Mats.Z (3DP24, Jonkoping University / Campus Varnamo) for profile improvements during internship autumn 2025.",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG-CF Rigid X"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"0.4",
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"275"
+	],
+	"nozzle_temperature_range_low": [
+		"245"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"0"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"6"
+	],
+	"slow_down_min_speed": [
+		"40"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA E-PLA",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANEP_00",
+	"filament_id": "GF_ANEP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"5"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA E-PLA"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA Economy",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANPL_00",
+	"filament_id": "GF_ANPL",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA Economy"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA HT-PLA PRO Matte",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANHTP_00",
+	"filament_id": "GF_ANHTP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"55"
+	],
+	"filament_density": [
+		"1.4"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"11"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA HT-PLA PRO Matte"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"245"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA Premium Silk",
+	"inherits": "Generic PLA Silk @base",
+	"from": "system",
+	"setting_id": "GF_ANPS_00",
+	"filament_id": "GF_ANPS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"50"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"70"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"42.5"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA Premium Silk"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"250",
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245",
+		"245"
+	],
+	"nozzle_temperature_range_high": [
+		"255"
+	],
+	"nozzle_temperature_range_low": [
+		"235"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA Textura",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANTE_00",
+	"filament_id": "GF_ANTE",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"55"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA Textura"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA Wood",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANPLW_00",
+	"filament_id": "GF_ANPLW",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"54.5"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA Wood"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"230",
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230",
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"0"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA X-PLA High Speed",
+	"inherits": "Generic PLA High Speed @base",
+	"from": "system",
+	"setting_id": "GF_ANXPH_00",
+	"filament_id": "GF_ANXPH",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA X-PLA High Speed"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA X-PLA",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANXP_00",
+	"filament_id": "GF_ANXP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"39"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"14",
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA X-PLA"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230",
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA rPLA RE-ADD",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANRPL_00",
+	"filament_id": "GF_ANRPL",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"5"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA rPLA RE-ADD"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json

@@ -0,0 +1,320 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA-CF Carbon Fiber",
+	"inherits": "Generic PLA-CF @base",
+	"from": "system",
+	"setting_id": "GF_ANPCF_00",
+	"filament_id": "GF_ANPCF",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"45"
+	],
+	"cool_plate_temp_initial_layer": [
+		"45"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"37"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n\n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA-CF Carbon Fiber"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"235"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"0"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"7"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"50"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"50"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"version": "2.0.0.87"
+}

resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PVDF Adamant S1",
+	"inherits": "Generic PA @base",
+	"from": "system",
+	"setting_id": "GF_ANPV_00",
+	"filament_id": "GF_ANPV",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"25"
+	],
+	"filament_adhesiveness_category": [
+		"400"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"146"
+	],
+	"filament_density": [
+		"1.8"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"4",
+		"4"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PVDF Adamant S1"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"0.4",
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265",
+		"265"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"135"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth TPU EasyFlex",
+	"inherits": "Generic TPU @base",
+	"from": "system",
+	"setting_id": "GF_ANEF_00",
+	"filament_id": "GF_ANEF",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"30"
+	],
+	"eng_plate_temp_initial_layer": [
+		"30"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"600"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"82"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"40",
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"3.9",
+		"5"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"0",
+		"0"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth TPU EasyFlex"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"35"
+	],
+	"hot_plate_temp_initial_layer": [
+		"35"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth TPU Pro Matte 85A",
+	"inherits": "Generic TPU @base",
+	"from": "system",
+	"setting_id": "GF_ANTA_00",
+	"filament_id": "GF_ANTA",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"30"
+	],
+	"cool_plate_temp_initial_layer": [
+		"30"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"30"
+	],
+	"eng_plate_temp_initial_layer": [
+		"30"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"600"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"82"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"3.2",
+		"5"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.2 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"0",
+		"0"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40",
+		"40"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth TPU Pro Matte 85A"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"35"
+	],
+	"hot_plate_temp_initial_layer": [
+		"35"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"250",
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250",
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json

@@ -0,0 +1,340 @@
+{
+	"type": "filament",
+	"name": "addnorth TPU Pro Matte 95A",
+	"inherits": "Generic TPU @base",
+	"from": "system",
+	"setting_id": "GF_ANTM_00",
+	"filament_id": "GF_ANTM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"30"
+	],
+	"eng_plate_temp_initial_layer": [
+		"30"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"600"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"82"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"40",
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"3.9",
+		"5"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.3 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"0",
+		"0"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40",
+		"40"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth TPU Pro Matte 95A"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"35"
+	],
+	"hot_plate_temp_initial_layer": [
+		"35"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @BBL X1C",
+	"renamed_from": "0.20mm Bambu Support W @BBL X1C",
 	"inherits": "fdm_process_single_0.20",
 	"from": "system",
 	"setting_id": "GP004",

resources/profiles/Blocks.json

@@ -1,6 +1,6 @@
 {
 	"name": "Blocks",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Blocks configurations",
 	"machine_model_list": [

resources/profiles/Blocks/filament/Blocks Generic ABS.json

@@ -85,10 +85,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic ASA-CF.json

@@ -85,10 +85,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic ASA.json

@@ -85,10 +85,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PA-CF.json

@@ -91,10 +91,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PA.json

@@ -16,10 +16,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PC.json

@@ -16,10 +16,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PETG.json

@@ -87,14 +87,11 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PLA-CF.json

@@ -22,10 +22,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PLA.json

@@ -45,14 +45,11 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PVA.json

@@ -16,10 +16,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic TPU.json

@@ -60,14 +60,11 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "6",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "6",
 	"top_shell_layers": "6",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "5",
 	"top_shell_layers": "5",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",