docs: translate README to English

Plater is a wxWindow subclass holding a pImpl (unique_ptr<priv> p). On app
exit the member p is destroyed before the wxWindow base destructor runs
DestroyChildren(), so the child View3D/GLCanvas3D windows are torn down
*after* p has already been freed.

GLCanvas3D::~GLCanvas3D() -> reset_volumes() then reaches back into the dead
Plater via two callbacks, each dereferencing the freed p:
  - Selection::clear() -> plater()->canvas3D() -> p->get_current_canvas3D()
  - _set_warning_notification() -> plater()->get_notification_manager()
    -> p->notification_manager
Which one fires depends on scene state (selection vs. volumes present), so
quitting with a model loaded reliably crashes with EXC_BAD_ACCESS.

Guard both callbacks with the existing wxGetApp().is_closing() flag (set in
MainFrame's close handler and GUI_App::shutdown(), both before
DoDelayedCleanup destroys the frame). Both calls are UI-only side effects
that are no-ops during shutdown, so normal-use behavior is unchanged.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

.github/workflows/check_profiles.yml

@@ -28,7 +28,7 @@ jobs:
           curl -L -o OrcaSlicer_profile_validator https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/OrcaSlicer_profile_validator_Linux_Ubuntu2404_nightly
           chmod +x ./OrcaSlicer_profile_validator
 
-      # validate profiles
+      # Validate all system profiles.
       - name: validate system profiles
         id: validate_system
         continue-on-error: true
@@ -50,11 +50,101 @@ jobs:
         continue-on-error: true
         working-directory: ${{ github.workspace }}
         run: |
-          set +e
-          curl -LJO https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
-          unzip -q ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_custom.log
-          exit ${PIPESTATUS[0]}
+          fixtures_dir="${{ runner.temp }}/profile-fixtures"
+          output_dir="${{ runner.temp }}/custom-preset-validation"
+          combined_log="${{ runner.temp }}/validate_custom.log"
+          summary="${output_dir}/summary.md"
+          release_url="https://github.com/OrcaSlicer/OrcaSlicer-profile-validator/releases/download/fixture-archive"
+
+          rm -rf "${fixtures_dir}" "${output_dir}"
+          mkdir -p "${fixtures_dir}" "${output_dir}"
+
+          curl -fsSL -o "${fixtures_dir}/manifest.json" "${release_url}/manifest.json"
+
+          MANIFEST_PATH="${fixtures_dir}/manifest.json" python3 <<'PY' > "${fixtures_dir}/fixtures.tsv"
+          import json
+          import os
+
+          with open(os.environ["MANIFEST_PATH"], encoding="utf-8") as fh:
+              manifest = json.load(fh)
+
+          if isinstance(manifest, dict):
+              entries = manifest.get("fixtures", [])
+          else:
+              entries = manifest
+
+          for entry in entries:
+              version = entry.get("version", "")
+              asset = entry.get("asset", "")
+              sha256 = entry.get("asset_sha256", "")
+              if not version or not asset:
+                  continue
+              print(f"{version}\t{asset}\t{sha256}")
+          PY
+
+          if [ ! -s "${fixtures_dir}/fixtures.tsv" ]; then
+            echo "No custom preset fixtures found in ${release_url}/manifest.json" | tee "${combined_log}"
+            exit 1
+          fi
+
+          {
+            echo "## Custom Preset Fixture Validation"
+            echo ""
+            echo "| Version | Status | Log |"
+            echo "| --- | --- | --- |"
+          } > "${summary}"
+
+          status=0
+          failed_logs=()
+
+          while IFS=$'\t' read -r version asset expected_sha256; do
+            fixture_zip="${fixtures_dir}/${asset}"
+            asset_url_name="$(python3 -c 'import sys, urllib.parse; print(urllib.parse.quote(sys.argv[1], safe=""))' "${asset}")"
+            profile_tree="${output_dir}/profiles-${version}"
+            log_path="${output_dir}/${version}.log"
+
+            curl -fsSL -o "${fixture_zip}" "${release_url}/${asset_url_name}"
+
+            if [ -n "${expected_sha256}" ] && [ "${expected_sha256}" != "<sha256>" ]; then
+              echo "${expected_sha256}  ${fixture_zip}" | sha256sum -c -
+            fi
+
+            rm -rf "${profile_tree}"
+            mkdir -p "${profile_tree}"
+            cp -a "${{ github.workspace }}/resources/profiles/." "${profile_tree}/"
+            rm -rf "${profile_tree}/user"
+            unzip -q "${fixture_zip}" -d "${profile_tree}"
+
+            set +e
+            ./OrcaSlicer_profile_validator -p "${profile_tree}" -l 2 > "${log_path}" 2>&1
+            result=$?
+            set -e
+
+            if [ "${result}" -eq 0 ]; then
+              echo "| ${version} | PASS | ${version}.log |" >> "${summary}"
+            else
+              echo "| ${version} | FAIL | ${version}.log |" >> "${summary}"
+              failed_logs+=("${log_path}")
+              status=1
+            fi
+          done < "${fixtures_dir}/fixtures.tsv"
+
+          {
+            cat "${summary}"
+            if [ "${#failed_logs[@]}" -gt 0 ]; then
+              echo ""
+              echo "## Failed Fixture Logs"
+              for log_path in "${failed_logs[@]}"; do
+                echo ""
+                echo "### $(basename "${log_path}" .log)"
+                echo '```'
+                head -c 12000 "${log_path}" || echo "No output captured"
+                echo '```'
+              done
+            fi
+          } | tee "${combined_log}"
+
+          exit "${status}"
 
       - name: Prepare PR number for comment workflow
         if: ${{ always() && github.event_name == 'pull_request' }}

BUILD_MAC_KX.md

@@ -0,0 +1,167 @@
+# BUILD_MAC_KX.md — building OrcaSlicer-KX on macOS (Apple Silicon)
+
+> macOS build guide for this fork. Upstream (viewit) ships only Linux & Windows
+> binaries; this fork exists to add the **macOS build** (see Releases for the `.app`).
+> The upstream `CLAUDE.md`/`AGENTS.md` are left untouched.
+
+**Verified recipe:** run as-is on 2026-07-02 on a **Mac M2 (arm64, macOS 25.x)**.
+It produced a working `.app` that launches. Timings below are real, measured.
+
+---
+
+## What this is
+
+Fork of **OrcaSlicer-KX** (`https://gitea.it-drui.de/viewit/OrcaSlicer-KX`), itself
+a fork of SoftFever/OrcaSlicer with patches for the **Anycubic Kobra X**. Current
+checkout: tag **`v2.4.1-kx1`**.
+
+The fork's changes vs upstream are **branding (logo/icon/splash/about), redirecting
+the updater to Gitea, and bugfix backports**. They **do not touch anything
+platform-specific** (no CMake, no build scripts, no `src/platform`, no `*.mm`, no
+`Info.plist`). The macOS icon (`resources/Icon.icns`,
+`resources/images/OrcaSlicer.icns`) already ships regenerated with KX branding. So
+building on Mac **is not a port, it's a recompile** using upstream's own
+`build_release_macos.sh`.
+
+Upstream only publishes **Linux (AppImage)** and **Windows (zip)** — there is no
+official `.dmg`. This clone is for producing the Mac build yourself.
+
+---
+
+## Requirements (one time)
+
+- **Xcode Command Line Tools** (NOT full Xcode.app — see the `-x` note).
+  Check: `xcode-select -p` prints a path.
+- **Homebrew** with:
+
+```bash
+brew install cmake ninja automake texinfo libtool pkg-config
+```
+
+(`automake texinfo libtool` are needed by the deps stage; `cmake`+`ninja` by the build.)
+
+### Why `-x` (Ninja) and not the default
+
+`build_release_macos.sh` defaults to the **Xcode** CMake generator, which requires
+**full Xcode.app (~15 GB from the App Store)**. The **`-x`** flag switches to
+**Ninja**, which works with just the Command Line Tools. Always use it here.
+
+---
+
+## Build (arm64 / Apple Silicon)
+
+Two stages, run **from the repo root** (`~/Developer/OrcaSlicer-KX`):
+
+```bash
+# Stage 1 — dependencies (Boost, wxWidgets, TBB, OCCT, OpenCV, ...)
+#           202 static libs → deps/build/arm64/OrcaSlicer_dep
+./build_release_macos.sh -d -x -a arm64      # measured: ~14.5 min
+
+# Stage 2 — the slicer itself → build/arm64/OrcaSlicer/OrcaSlicer.app
+./build_release_macos.sh -s -x -a arm64      # measured: ~18 min
+```
+
+Flags: `-d` deps only · `-s` slicer only · `-x` Ninja · `-a arch`. On an M2 with
+16 GB, `-1` (single job) is not needed; if a Mac with less RAM OOMs while linking,
+add `-1`.
+
+**Output:** `build/arm64/OrcaSlicer/OrcaSlicer.app` (native arm64, ~367 MB,
+version `2.4.1-kx1`).
+
+### Normal output that is NOT an error
+
+- "CMake Deprecation" warnings and `Performing Test ... - Failed` lines in the deps
+  stage are **compiler feature detection**, not failures. The build still finishes
+  with exit 0 and `[202/202] Completed`.
+- The signature is **ad-hoc / linker-signed**. Strict `codesign -v` and `spctl`
+  complain ("code has no resources but signature indicates they must be present").
+  This is **harmless** for launching: a local build is **not quarantined**, so it
+  opens with a double-click, no Gatekeeper block. It does, however, make macOS
+  re-ask for folder and keychain permissions on every rebuild — see
+  *Stop the repeated folder / keychain permission prompts* below to fix that.
+
+---
+
+## Install into /Applications
+
+There is usually an official `/Applications/OrcaSlicer.app`. To avoid overwriting
+it, copy under a different name:
+
+```bash
+ditto build/arm64/OrcaSlicer/OrcaSlicer.app /Applications/OrcaSlicer-KX.app
+./scripts/macos_codesign_local.sh             # stable local signature — stops repeated permission prompts (see below)
+open /Applications/OrcaSlicer-KX.app          # verify it boots
+```
+
+(`ditto` preserves the bundle + signature better than `cp -R`.)
+
+---
+
+## Stop the repeated folder / keychain permission prompts (recommended)
+
+Because a local build is only **ad-hoc / linker-signed**, macOS identifies the app
+by its content hash (`cdhash`). That hash changes on every rebuild, so macOS treats
+each build as a brand-new app and re-asks for **folder access (TCC)** and the
+**keychain password** every time — the grants never stick.
+
+Fix it by signing the app with a **stable, machine-local, self-signed** identity, so
+its Designated Requirement becomes certificate-based (identical across rebuilds):
+
+```bash
+./scripts/macos_codesign_local.sh          # run AFTER copying the app to /Applications
+```
+
+On first run the script creates the identity `OrcaSlicer Local Codesign` in your
+login keychain (no admin password needed) and re-signs the installed app + local
+build output. Re-run it after every build/redeploy — it reuses the same identity.
+The Designated Requirement changes from `cdhash H"…"` to
+`identifier "com.orcaslicer.OrcaSlicer" and certificate leaf = H"…"`, which is stable.
+
+On the **next launch only**, allow the folder prompts and click **"Always Allow"**
+on the keychain prompt once; macOS then remembers them across future rebuilds.
+
+**Per-machine — share the script, never the cert.** The certificate and its private
+key are generated locally and live only in your login keychain; they are never
+written to the repo. Each developer runs the script once on their own Mac to create
+their own local identity. Commit and share the *script*, not the certificate.
+
+---
+
+## Update to a new tag (e.g. kx2)
+
+```bash
+git fetch --tags
+git checkout <new-tag>
+./build_release_macos.sh -s -x -a arm64       # deps are cached ⇒ only the slicer recompiles (~18 min)
+```
+
+If the new tag **changes a dependency**, run the `-d` stage again first.
+
+---
+
+## Publishing the macOS release
+
+The distributable is a zip of the `.app` (matching how upstream ships Windows):
+
+```bash
+ditto -c -k --keepParent build/arm64/OrcaSlicer/OrcaSlicer.app \
+  OrcaSlicer-KX-v2.4.1-kx1-macOS-arm64.zip
+```
+
+Attach it to a Gitea Release on this fork. **Gotcha:** a freshly created Gitea fork
+may have the **Releases unit disabled** (`has_releases:false`), which makes asset
+downloads return 404 even though the upload succeeded. Enable it once:
+`PATCH /api/v1/repos/<owner>/<repo>` with `{"has_releases": true}`.
+
+---
+
+## Gotchas
+
+- **Updater points to Gitea, not upstream** — commit `7ed0173` hardcodes
+  `https://gitea.it-drui.de/api/v1/repos/viewit/OrcaSlicer-KX/releases/latest`.
+  There is no macOS artifact there, so "check for updates" won't find a macOS build.
+  Harmless; updating = recompiling (above).
+- **Universal / Intel**: `-a x86_64` (Intel), `-a universal` (fat binary; requires
+  prior arm64 and x86_64 builds). On Apple Silicon, `arm64` is the right choice.
+- **Not notarized** — distributing to third parties would need an Apple Developer
+  account ($99/yr) + notarization. Not needed for local use.

README.md

@@ -1,8 +1,8 @@
 # OrcaSlicer-KX
 
-**OrcaSlicer mit KX-Bridge-Patches für den Anycubic Kobra X**
+**OrcaSlicer with KX-Bridge patches for the Anycubic Kobra X**
 
-Fertige Binaries von [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) mit integrierten KX-spezifischen Erweiterungen — empfohlen für den Einsatz mit [KX-Bridge](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
+Ready-to-use binaries of [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) with integrated KX-specific extensions — recommended for use with [KX-Bridge](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
 
 [![Download](https://img.shields.io/badge/Download-Releases-2EA043?style=for-the-badge&logo=gitea&logoColor=white)](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases)
 
@@ -10,49 +10,51 @@ Fertige Binaries von [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) mit i
 
 ## Download
 
-Aktuelle Version: **2.4.1-kx1** (Basis: OrcaSlicer 2.4.1 stable)
+Current version: **2.4.2-kx1** (base: OrcaSlicer 2.4.2 stable)
 
-| Plattform | Datei | Hinweis |
+| Platform | File | Note |
 |-----------|-------|---------|
-| Linux x86_64 | `OrcaSlicer-KX-Linux-x86_64.AppImage` | `chmod +x` setzen, dann starten |
-| Windows x86_64 | `OrcaSlicer-KX-Windows-x86_64.zip` | Entpacken, `orca-slicer.exe` starten |
+| Linux x86_64 | `OrcaSlicer-KX-Linux-x86_64.AppImage` | `chmod +x`, then run |
+| Windows x86_64 | `OrcaSlicer-KX-Windows-x86_64.zip` | Unzip, run `orca-slicer.exe` |
+| macOS arm64 (Apple Silicon) | `OrcaSlicer-KX-<version>-macOS-arm64.zip` | on [this fork's Releases](https://gitea.it-drui.de/walterioo/OrcaSlicer-KX/releases) — not notarized, see the release notes |
 
-macOS wird nicht bereitgestellt — bitte aus dem Upstream selbst bauen.
+The macOS build (Apple Silicon / arm64) is provided on this fork's [Releases](https://gitea.it-drui.de/walterioo/OrcaSlicer-KX/releases); build details are in `BUILD_MAC_KX.md`. Intel Macs are not shipped — rebuild with `-a x86_64`.
 
 ---
 
-## Enthaltene Patches
+## Included patches
 
-- **Moonraker-Bridge:** mehrstufiges Filament-Matching (Name, Sub-Brand, Vendor-Fallback) mit Vendor-Filter-Skip
-- **AMS-Leerslot-Fix:** leere AMS-Slots werden korrekt grau dargestellt (kein Absturz / falsches Filament)
-- **Filament-ID:** eindeutige `filament_id` für abgeleitete User-Presets (korrekte Bridge-Synchronisation)
-- **Kobra X Profile:** Drucker- und G-Code-Profile für den Anycubic Kobra X
+- **Moonraker bridge:** multi-stage filament matching (name, sub-brand, vendor fallback) with vendor-filter skip
+- **AMS empty-slot fix:** empty AMS slots are shown correctly in grey (no crash / wrong filament)
+- **Filament ID:** unique `filament_id` for derived user presets (correct bridge synchronization)
+- **Kobra X profiles:** printer and G-code profiles for the Anycubic Kobra X
+- **Kobra X bed-temp fix:** `bed_temperature_formula` set to `by_first_filament` — the G9111 macro now heats to the correct temperature of the printed filament instead of the maximum across all project filaments
 
 ---
 
-## Filament-Presets & KX-Bridge
+## Filament presets & KX-Bridge
 
-📄 [Anleitung: eigene Filament-Presets erstellen, prüfen und importieren](https://gitea.it-drui.de/viewit/KX-Bridge-Release/src/branch/master/docs/filament-preset-bridge-guide.md)
+📄 [Guide: create, validate and import your own filament presets](https://gitea.it-drui.de/viewit/KX-Bridge-Release/src/branch/master/docs/filament-preset-bridge-guide.md)
 
 ---
 
-## Branch-Struktur
+## Branch structure
 
-| Branch | Version | Rolle |
+| Branch | Version | Role |
 |--------|---------|-------|
-| `stable` / `kx-v2.4` | 2.4.1-kx1 | **aktuell stabil** |
-| `kx-v2.3` | 2.3.2-kx4 | eingefroren (Altstand) |
+| `stable` / `kx-v2.4` | 2.4.1-kx1 | **current stable** |
+| `kx-v2.3` | 2.3.2-kx4 | frozen (legacy) |
 
 ---
 
-## Warum ein eigenes Repo?
+## Why a separate repo?
 
-KX-Bridge selbst liegt unter [viewit/KX-Bridge-Release](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
-OrcaSlicer steht unter AGPL-3.0 — ein separates Repo hält Lizenzen, Quellherkunft und Update-Zyklen sauber getrennt.
+KX-Bridge itself lives at [viewit/KX-Bridge-Release](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
+OrcaSlicer is licensed under AGPL-3.0 — a separate repo keeps licenses, source provenance and update cycles cleanly separated.
 
 ---
 
-## Lizenz & Quelle
+## License & source
 
-Diese Builds sind Ableitungen von [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer), lizenziert unter **GNU AGPL-3.0**.
-Der KX-Patch-Quellcode liegt auf Branch [`kx-v2.4`](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/src/branch/kx-v2.4) dieses Repos.
+These builds are derivatives of [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer), licensed under **GNU AGPL-3.0**.
+The KX patch source code lives on branch [`kx-v2.4`](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/src/branch/kx-v2.4) of this repo.

resources/profiles/Afinia.json

@@ -1,6 +1,6 @@
 {
 	"name": "Afinia",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Afinia configurations",
 	"machine_model_list": [
@@ -124,14 +124,6 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
-		{
-			"name": "Afinia ABS",
-			"sub_path": "filament/Afinia ABS.json"
-		},
-		{
-			"name": "Afinia ABS+",
-			"sub_path": "filament/Afinia ABS+.json"
-		},
 		{
 			"name": "Afinia ABS+@HS",
 			"sub_path": "filament/Afinia ABS+@HS.json"
@@ -140,34 +132,18 @@
 			"name": "Afinia ABS@HS",
 			"sub_path": "filament/Afinia ABS@HS.json"
 		},
-		{
-			"name": "Afinia Value ABS",
-			"sub_path": "filament/Afinia Value ABS.json"
-		},
 		{
 			"name": "Afinia Value ABS@HS",
 			"sub_path": "filament/Afinia Value ABS@HS.json"
 		},
-		{
-			"name": "Afinia PLA",
-			"sub_path": "filament/Afinia PLA.json"
-		},
 		{
 			"name": "Afinia PLA@HS",
 			"sub_path": "filament/Afinia PLA@HS.json"
 		},
-		{
-			"name": "Afinia Value PLA",
-			"sub_path": "filament/Afinia Value PLA.json"
-		},
 		{
 			"name": "Afinia Value PLA@HS",
 			"sub_path": "filament/Afinia Value PLA@HS.json"
 		},
-		{
-			"name": "Afinia TPU",
-			"sub_path": "filament/Afinia TPU.json"
-		},
 		{
 			"name": "Afinia TPU@HS",
 			"sub_path": "filament/Afinia TPU@HS.json"

resources/profiles/Afinia/filament/Afinia ABS+.json

@@ -1,37 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFB00",
-	"setting_id": "i5tf9foHnTVNmA2r",
-	"name": "Afinia ABS+",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_abs",
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"nozzle_temperature": [
-		"275"
-	],
-	"nozzle_temperature_initial_layer": [
-		"275"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia ABS.json

@@ -1,31 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFB00",
-	"setting_id": "LhDHvMepbh8ecfQT",
-	"name": "Afinia ABS",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_abs",
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia PLA.json

@@ -1,34 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFA00",
-	"setting_id": "1qEFsay7kjYIUkpG",
-	"name": "Afinia PLA",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"21"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia TPU.json

@@ -1,28 +0,0 @@
-{
-	"type": "filament",
-	"name": "Afinia TPU",
-	"inherits": "fdm_filament_tpu",
-	"from": "system",
-	"setting_id": "E7WBTARZ971LaDMj",
-	"filament_id": "GFU01",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Afinia"
-	],
-	"filament_density": [
-		"1.22"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"filament_cost": [
-		"41.99"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia Value ABS.json

@@ -1,37 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFB00",
-	"setting_id": "jEYVpOPBjFtQ0DXn",
-	"name": "Afinia Value ABS",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_abs",
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"nozzle_temperature": [
-		"245"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia Value PLA.json

@@ -1,40 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFA00",
-	"setting_id": "oNBk0IxmW7C99WI3",
-	"name": "Afinia Value PLA",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"21"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"nozzle_temperature": [
-		"190"
-	],
-	"nozzle_temperature_initial_layer": [
-		"190"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Anker/process/0.20mm Optimal 0.6 nozzle @Anker.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Optimal 0.6 nozzle @Anker",
+	"renamed_from": "0.20mm Optimal 0.6 nozzle @Anker.json",
 	"inherits": "fdm_process_anker_common_0_6",
 	"from": "system",
 	"setting_id": "re5qmcOFJ1OJP3Ip",

resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json

@@ -124,6 +124,7 @@
 		"0"
 	],
 	"machine_pause_gcode": "M600",
+	"bed_temperature_formula": "by_first_filament",
 	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
 	"machine_tool_change_time": "0",
 	"machine_unload_filament_time": "0",

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.01.00.18",
+	"version": "02.01.00.19",
 	"force_update": "0",
 	"description": "BBL configurations",
 	"machine_model_list": [
@@ -2177,6 +2177,10 @@
 			"name": "Generic ABS @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic ABS @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth ABS rABS",
+			"sub_path": "filament/addnorth/addnorth ABS rABS.json"
+		},
 		{
 			"name": "PolyLite ABS @BBL A1",
 			"sub_path": "filament/Polymaker/PolyLite ABS @BBL A1.json"
@@ -3005,6 +3009,22 @@
 			"name": "Generic PA @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PA @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PA Adura",
+			"sub_path": "filament/addnorth/addnorth PA Adura.json"
+		},
+		{
+			"name": "addnorth PA Adura FDA",
+			"sub_path": "filament/addnorth/addnorth PA Adura FDA.json"
+		},
+		{
+			"name": "addnorth PA6 Addlantis",
+			"sub_path": "filament/addnorth/addnorth PA6 Addlantis.json"
+		},
+		{
+			"name": "addnorth PVDF Adamant S1",
+			"sub_path": "filament/addnorth/addnorth PVDF Adamant S1.json"
+		},
 		{
 			"name": "Generic PA-CF",
 			"sub_path": "filament/Generic PA-CF.json"
@@ -3029,6 +3049,10 @@
 			"name": "Generic PA-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PA-CF @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PA-CF Adura X",
+			"sub_path": "filament/addnorth/addnorth PA-CF Adura X.json"
+		},
 		{
 			"name": "Bambu PC @BBL A1",
 			"sub_path": "filament/Bambu PC @BBL A1.json"
@@ -3329,6 +3353,10 @@
 			"name": "Generic PC @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PC @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PC BLend HT LCF",
+			"sub_path": "filament/addnorth/addnorth PC BLend HT LCF.json"
+		},
 		{
 			"name": "Generic PCTG @BBL A1",
 			"sub_path": "filament/Generic PCTG @BBL A1.json"
@@ -4185,6 +4213,30 @@
 			"name": "Generic PETG @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PETG @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PETG Base",
+			"sub_path": "filament/addnorth/addnorth PETG Base.json"
+		},
+		{
+			"name": "addnorth PETG ESD",
+			"sub_path": "filament/addnorth/addnorth PETG ESD.json"
+		},
+		{
+			"name": "addnorth PETG Economy",
+			"sub_path": "filament/addnorth/addnorth PETG Economy.json"
+		},
+		{
+			"name": "addnorth PETG Flame v0",
+			"sub_path": "filament/addnorth/addnorth PETG Flame v0.json"
+		},
+		{
+			"name": "addnorth PETG PRO Matte",
+			"sub_path": "filament/addnorth/addnorth PETG PRO Matte.json"
+		},
+		{
+			"name": "addnorth PETG rPETG Matte",
+			"sub_path": "filament/addnorth/addnorth PETG rPETG Matte.json"
+		},
 		{
 			"name": "Generic PETG HF @BBL A1",
 			"sub_path": "filament/Generic PETG HF @BBL A1.json"
@@ -4305,6 +4357,10 @@
 			"name": "Generic PETG-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PETG-CF Rigid X",
+			"sub_path": "filament/addnorth/addnorth PETG-CF Rigid X.json"
+		},
 		{
 			"name": "PolyLite PETG @BBL A1",
 			"sub_path": "filament/Polymaker/PolyLite PETG @BBL A1.json"
@@ -6589,6 +6645,34 @@
 			"name": "Generic PLA @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PLA E-PLA",
+			"sub_path": "filament/addnorth/addnorth PLA E-PLA.json"
+		},
+		{
+			"name": "addnorth PLA Economy",
+			"sub_path": "filament/addnorth/addnorth PLA Economy.json"
+		},
+		{
+			"name": "addnorth PLA HT-PLA PRO Matte",
+			"sub_path": "filament/addnorth/addnorth PLA HT-PLA PRO Matte.json"
+		},
+		{
+			"name": "addnorth PLA Textura",
+			"sub_path": "filament/addnorth/addnorth PLA Textura.json"
+		},
+		{
+			"name": "addnorth PLA Wood",
+			"sub_path": "filament/addnorth/addnorth PLA Wood.json"
+		},
+		{
+			"name": "addnorth PLA X-PLA",
+			"sub_path": "filament/addnorth/addnorth PLA X-PLA.json"
+		},
+		{
+			"name": "addnorth PLA rPLA RE-ADD",
+			"sub_path": "filament/addnorth/addnorth PLA rPLA RE-ADD.json"
+		},
 		{
 			"name": "Generic PLA High Speed @BBL A1",
 			"sub_path": "filament/Generic PLA High Speed @BBL A1.json"
@@ -6649,6 +6733,10 @@
 			"name": "Generic PLA High Speed @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PLA X-PLA High Speed",
+			"sub_path": "filament/addnorth/addnorth PLA X-PLA High Speed.json"
+		},
 		{
 			"name": "Generic PLA Silk",
 			"sub_path": "filament/Generic PLA Silk.json"
@@ -6689,6 +6777,10 @@
 			"name": "Generic PLA Silk @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PLA Premium Silk",
+			"sub_path": "filament/addnorth/addnorth PLA Premium Silk.json"
+		},
 		{
 			"name": "Generic PLA-CF",
 			"sub_path": "filament/Generic PLA-CF.json"
@@ -6729,6 +6821,10 @@
 			"name": "Generic PLA-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth PLA-CF Carbon Fiber",
+			"sub_path": "filament/addnorth/addnorth PLA-CF Carbon Fiber.json"
+		},
 		{
 			"name": "Numakers PLA+ @BBL A1",
 			"sub_path": "filament/Numakers/Numakers PLA+ @BBL A1.json"
@@ -6981,10 +7077,6 @@
 			"name": "Panchroma PLA @BBL X1C 0.2 nozzle",
 			"sub_path": "filament/Polymaker/Panchroma PLA @BBL X1C 0.2 nozzle.json"
 		},
-		{
-			"name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle",
-			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json"
-		},
 		{
 			"name": "Panchroma PLA Celestial @BBL A1",
 			"sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL A1.json"
@@ -7381,6 +7473,10 @@
 			"name": "Panchroma PLA Silk @BBL X1C",
 			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C.json"
 		},
+		{
+			"name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle",
+			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json"
+		},
 		{
 			"name": "Panchroma PLA Starlight @BBL A1",
 			"sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL A1.json"
@@ -8889,6 +8985,18 @@
 			"name": "Generic TPU @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic TPU @BBL X2D 0.4 nozzle.json"
 		},
+		{
+			"name": "addnorth TPU EasyFlex",
+			"sub_path": "filament/addnorth/addnorth TPU EasyFlex.json"
+		},
+		{
+			"name": "addnorth TPU Pro Matte 85A",
+			"sub_path": "filament/addnorth/addnorth TPU Pro Matte 85A.json"
+		},
+		{
+			"name": "addnorth TPU Pro Matte 95A",
+			"sub_path": "filament/addnorth/addnorth TPU Pro Matte 95A.json"
+		},
 		{
 			"name": "Generic TPU for AMS @BBL A1",
 			"sub_path": "filament/Generic TPU for AMS @BBL A1.json"

resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Bambu PLA Tough @BBL X1C",
+	"renamed_from": "Bambu PLA Impact @BBL X1C",
 	"inherits": "Bambu PLA Tough @base",
 	"from": "system",
 	"setting_id": "GFSA09_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1",
+	"renamed_from": "Panchroma PLA Stain @BBL A1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_00",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1M",
+	"renamed_from": "Panchroma PLA Stain @BBL A1M",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL P1P",
+	"renamed_from": "Panchroma PLA Stain @BBL P1P",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_04",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL X1",
+	"renamed_from": "Panchroma PLA Stain @BBL X1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_06",

resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth ABS rABS",
+	"inherits": "Generic ABS @base",
+	"from": "system",
+	"setting_id": "GF_ANRA_00",
+	"filament_id": "GF_ANRA",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"25"
+	],
+	"fan_min_speed": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"200"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"43"
+	],
+	"filament_density": [
+		"1.03"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth ABS rABS"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"105"
+	],
+	"hot_plate_temp_initial_layer": [
+		"105"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"255",
+		"255"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250",
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"50"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"105"
+	],
+	"textured_plate_temp_initial_layer": [
+		"105"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PA Adura FDA",
+	"inherits": "Generic PA @base",
+	"from": "system",
+	"setting_id": "GF_ANAF_00",
+	"filament_id": "GF_ANAF",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.99",
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"11"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PA Adura FDA"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"0.4",
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"265",
+		"265"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265",
+		"265"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"245"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PA Adura",
+	"inherits": "Generic PA @base",
+	"from": "system",
+	"setting_id": "GF_ANAD_00",
+	"filament_id": "GF_ANAD",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"50"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.99",
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"11"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PA Adura"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"0.4",
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"265",
+		"265"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265",
+		"265"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"245"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PA-CF Adura X",
+	"inherits": "Generic PA-CF @base",
+	"from": "system",
+	"setting_id": "GF_ANAX_00",
+	"filament_id": "GF_ANAX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"109"
+	],
+	"filament_density": [
+		"1.2"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.99",
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"15"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PA-CF Adura X"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"280",
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275",
+		"275"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"260"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"120"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PA6 Addlantis",
+	"inherits": "Generic PA @base",
+	"from": "system",
+	"setting_id": "GF_ANLA_00",
+	"filament_id": "GF_ANLA",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"82"
+	],
+	"filament_density": [
+		"1.18"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.99",
+		"0.99"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"11"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.62 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PA6 Addlantis"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PA6"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"0.4",
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"275",
+		"275"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275",
+		"275"
+	],
+	"nozzle_temperature_range_high": [
+		"285"
+	],
+	"nozzle_temperature_range_low": [
+		"265"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"15"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PC BLend HT LCF",
+	"inherits": "Generic PC @base",
+	"from": "system",
+	"setting_id": "GF_ANPBX_00",
+	"filament_id": "GF_ANPBX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"109"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"15",
+		"15"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PC BLend HT LCF"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PC"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"285",
+		"285"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275",
+		"275"
+	],
+	"nozzle_temperature_range_high": [
+		"290"
+	],
+	"nozzle_temperature_range_low": [
+		"265"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"185"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG Base",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANPE_00",
+	"filament_id": "GF_ANPE",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"35.6"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG Base"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255",
+		"255"
+	],
+	"nozzle_temperature_range_high": [
+		"275"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG ESD",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANEG_00",
+	"filament_id": "GF_ANEG",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"76"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.97",
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"20"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 high reliability - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG ESD"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"290",
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290",
+		"290"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"255"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG Economy",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANGE_00",
+	"filament_id": "GF_ANGE",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"27"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG Economy"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255",
+		"255"
+	],
+	"nozzle_temperature_range_high": [
+		"275"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG Flame v0",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANPF_00",
+	"filament_id": "GF_ANPF",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"71"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.97",
+		"0.97"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"20"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.4 high reliability - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG Flame V0"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"290",
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290",
+		"290"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"255"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG PRO Matte",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANPM_00",
+	"filament_id": "GF_ANPM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"54.5"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG PRO Matte"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"275"
+	],
+	"nozzle_temperature_range_low": [
+		"235"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"1"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG rPETG Matte",
+	"inherits": "Generic PETG @base",
+	"from": "system",
+	"setting_id": "GF_ANRM_00",
+	"filament_id": "GF_ANRM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"36"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG rPETG Matte"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255",
+		"255"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"225"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PETG-CF Rigid X",
+	"inherits": "Generic PETG-CF @base",
+	"from": "system",
+	"setting_id": "GF_ANRX_00",
+	"filament_id": "GF_ANRX",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"5"
+	],
+	"filament_adhesiveness_category": [
+		"300"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"82"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"11"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026 – Special thanks to Mats.Z (3DP24, Jonkoping University / Campus Varnamo) for profile improvements during internship autumn 2025.",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PETG-CF Rigid X"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"0.4",
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"275"
+	],
+	"nozzle_temperature_range_low": [
+		"245"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"0"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"6"
+	],
+	"slow_down_min_speed": [
+		"40"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA E-PLA",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANEP_00",
+	"filament_id": "GF_ANEP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"5"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA E-PLA"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA Economy",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANPL_00",
+	"filament_id": "GF_ANPL",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA Economy"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA HT-PLA PRO Matte",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANHTP_00",
+	"filament_id": "GF_ANHTP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"55"
+	],
+	"filament_density": [
+		"1.4"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"11"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA HT-PLA PRO Matte"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"245"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA Premium Silk",
+	"inherits": "Generic PLA Silk @base",
+	"from": "system",
+	"setting_id": "GF_ANPS_00",
+	"filament_id": "GF_ANPS",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"50"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"90"
+	],
+	"fan_min_speed": [
+		"70"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"42.5"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"10"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA Premium Silk"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"250",
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245",
+		"245"
+	],
+	"nozzle_temperature_range_high": [
+		"255"
+	],
+	"nozzle_temperature_range_low": [
+		"235"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA Textura",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANTE_00",
+	"filament_id": "GF_ANTE",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"55"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA Textura"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA Wood",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANPLW_00",
+	"filament_id": "GF_ANPLW",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"54.5"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA Wood"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"230",
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230",
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"0"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA X-PLA High Speed",
+	"inherits": "Generic PLA High Speed @base",
+	"from": "system",
+	"setting_id": "GF_ANXPH_00",
+	"filament_id": "GF_ANXPH",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA X-PLA High Speed"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA X-PLA",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANXP_00",
+	"filament_id": "GF_ANXP",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"39"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"14",
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA X-PLA"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230",
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA rPLA RE-ADD",
+	"inherits": "Generic PLA @base",
+	"from": "system",
+	"setting_id": "GF_ANRPL_00",
+	"filament_id": "GF_ANRPL",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"55"
+	],
+	"cool_plate_temp_initial_layer": [
+		"5"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"23"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"16"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA rPLA RE-ADD"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json

@@ -0,0 +1,320 @@
+{
+	"type": "filament",
+	"name": "addnorth PLA-CF Carbon Fiber",
+	"inherits": "Generic PLA-CF @base",
+	"from": "system",
+	"setting_id": "GF_ANPCF_00",
+	"filament_id": "GF_ANPCF",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"45"
+	],
+	"cool_plate_temp_initial_layer": [
+		"45"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"100"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"37"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n\n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PLA-CF Carbon Fiber"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"235"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"0"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"7"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"50"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"50"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"version": "2.0.0.87"
+}

resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth PVDF Adamant S1",
+	"inherits": "Generic PA @base",
+	"from": "system",
+	"setting_id": "GF_ANPV_00",
+	"filament_id": "GF_ANPV",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"25"
+	],
+	"filament_adhesiveness_category": [
+		"400"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"146"
+	],
+	"filament_density": [
+		"1.8"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"4",
+		"4"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth PVDF Adamant S1"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+	],
+	"filament_type": [
+		"PA"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"0.4",
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265",
+		"265"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"40"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"135"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth TPU EasyFlex",
+	"inherits": "Generic TPU @base",
+	"from": "system",
+	"setting_id": "GF_ANEF_00",
+	"filament_id": "GF_ANEF",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"30"
+	],
+	"eng_plate_temp_initial_layer": [
+		"30"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"600"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"82"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"40",
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"3.9",
+		"5"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"0",
+		"0"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth TPU EasyFlex"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"35"
+	],
+	"hot_plate_temp_initial_layer": [
+		"35"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json

@@ -0,0 +1,339 @@
+{
+	"type": "filament",
+	"name": "addnorth TPU Pro Matte 85A",
+	"inherits": "Generic TPU @base",
+	"from": "system",
+	"setting_id": "GF_ANTA_00",
+	"filament_id": "GF_ANTA",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"30"
+	],
+	"cool_plate_temp_initial_layer": [
+		"30"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"30"
+	],
+	"eng_plate_temp_initial_layer": [
+		"30"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"600"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"82"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"3.2",
+		"5"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.2 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"0",
+		"0"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40",
+		"40"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth TPU Pro Matte 85A"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"35"
+	],
+	"hot_plate_temp_initial_layer": [
+		"35"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"250",
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250",
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json

@@ -0,0 +1,340 @@
+{
+	"type": "filament",
+	"name": "addnorth TPU Pro Matte 95A",
+	"inherits": "Generic TPU @base",
+	"from": "system",
+	"setting_id": "GF_ANTM_00",
+	"filament_id": "GF_ANTM",
+	"instantiation": "true",
+	"activate_air_filtration": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"circle_compensation_speed": [
+		"200"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers": [
+		"Bambu Lab A1 mini 0.4 nozzle",
+		"Bambu Lab A1 mini 0.6 nozzle",
+		"Bambu Lab A1 mini 0.8 nozzle",
+		"Bambu Lab A1 0.4 nozzle",
+		"Bambu Lab A1 0.6 nozzle",
+		"Bambu Lab A1 0.8 nozzle",
+		"Bambu Lab P1P 0.4 nozzle",
+		"Bambu Lab P1P 0.6 nozzle",
+		"Bambu Lab P1P 0.8 nozzle",
+		"Bambu Lab P1S 0.4 nozzle",
+		"Bambu Lab P1S 0.6 nozzle",
+		"Bambu Lab P1S 0.8 nozzle",
+		"Bambu Lab X1 0.4 nozzle",
+		"Bambu Lab X1 0.6 nozzle",
+		"Bambu Lab X1 0.8 nozzle",
+		"Bambu Lab X1 Carbon 0.4 nozzle",
+		"Bambu Lab X1 Carbon 0.6 nozzle",
+		"Bambu Lab X1 Carbon 0.8 nozzle",
+		"Bambu Lab X1E 0.4 nozzle",
+		"Bambu Lab X1E 0.6 nozzle",
+		"Bambu Lab X1E 0.8 nozzle",
+		"Bambu Lab H2D 0.4 nozzle",
+		"Bambu Lab H2D 0.6 nozzle",
+		"Bambu Lab H2D 0.8 nozzle",
+		"Bambu Lab H2D Pro 0.4 nozzle",
+		"Bambu Lab H2D Pro 0.6 nozzle",
+		"Bambu Lab H2D Pro 0.8 nozzle",
+		"Bambu Lab H2S 0.4 nozzle",
+		"Bambu Lab H2S 0.6 nozzle",
+		"Bambu Lab H2S 0.8 nozzle",
+		"Bambu Lab P2S 0.4 nozzle",
+		"Bambu Lab P2S 0.6 nozzle",
+		"Bambu Lab P2S 0.8 nozzle",
+		"Bambu Lab X2D 0.2 nozzle",
+		"Bambu Lab X2D 0.4 nozzle",
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"counter_coef_1": [
+		"0"
+	],
+	"counter_coef_2": [
+		"0.008"
+	],
+	"counter_coef_3": [
+		"-0.041"
+	],
+	"counter_limit_max": [
+		"0.033"
+	],
+	"counter_limit_min": [
+		"-0.035"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"diameter_limit": [
+		"50"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"30"
+	],
+	"eng_plate_temp_initial_layer": [
+		"30"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_adhesiveness_category": [
+		"600"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cost": [
+		"82"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"40",
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"3.9",
+		"5"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_notes": "File Version:2.3 - V.Pack:18_05_2026",
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0"
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"0",
+		"0"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40",
+		"40"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_settings_id": [
+		"addnorth TPU Pro Matte 95A"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_vendor": [
+		"addnorth"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hole_coef_1": [
+		"0"
+	],
+	"hole_coef_2": [
+		"-0.008"
+	],
+	"hole_coef_3": [
+		"0.23415"
+	],
+	"hole_limit_max": [
+		"0.22"
+	],
+	"hole_limit_min": [
+		"0.088"
+	],
+	"hot_plate_temp": [
+		"35"
+	],
+	"hot_plate_temp_initial_layer": [
+		"35"
+	],
+	"impact_strength_z": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240",
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235",
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_threshold_participating_cooling": [
+		"95%"
+	],
+	"pre_start_fan_time": [
+		"2"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"temperature_vitrification": [
+		"50"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"version": "2.0.0.77"
+}

resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @BBL X1C",
+	"renamed_from": "0.20mm Bambu Support W @BBL X1C",
 	"inherits": "fdm_process_single_0.20",
 	"from": "system",
 	"setting_id": "GP004",

resources/profiles/Blocks.json

@@ -1,6 +1,6 @@
 {
 	"name": "Blocks",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Blocks configurations",
 	"machine_model_list": [

resources/profiles/Blocks/filament/Blocks Generic ABS.json

@@ -85,10 +85,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic ASA-CF.json

@@ -85,10 +85,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic ASA.json

@@ -85,10 +85,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PA-CF.json

@@ -91,10 +91,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PA.json

@@ -16,10 +16,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PC.json

@@ -16,10 +16,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PETG.json

@@ -87,14 +87,11 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PLA-CF.json

@@ -22,10 +22,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PLA.json

@@ -45,14 +45,11 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PVA.json

@@ -16,10 +16,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic TPU.json

@@ -60,14 +60,11 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "6",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "6",
 	"top_shell_layers": "6",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "5",
 	"top_shell_layers": "5",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json

@@ -14,7 +14,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.30mm Extra Draft 0.4 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.30",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.3",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.30mm Optimal 1.0 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.30",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.30mm Standard 0.6 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.30",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.40mm Draft 0.6 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "2",
 	"layer_height": "0.40",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.40mm Standard 0.8 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.40",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.50mm Draft 0.8 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.50",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.50mm Optimal 1.2 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.50",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.50mm Standard 1.0 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.50",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.60mm Draft 1.0 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.60",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.60mm Standard 1.2 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.60",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.70mm Draft 1.2 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.70",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.70mm Extra Draft 1.0 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.70",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.80mm Extra Draft 1.2 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "2",
 	"layer_height": "0.80",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }