Merge branch 'master' into wipe_tower_improvements

and a "print now" option
cf. #880, #245, #55, #87

.clang-format

@@ -1,120 +0,0 @@
-#
-# http://clang.llvm.org/docs/ClangFormatStyleOptions.html
-#
-Language:        Cpp
-AccessModifierOffset: -4
-AlignAfterOpenBracket: Align
-AlignConsecutiveAssignments: true
-AlignConsecutiveDeclarations: false
-AlignEscapedNewlines: DontAlign
-AlignOperands:   true
-AlignTrailingComments: true
-AllowAllParametersOfDeclarationOnNextLine: true
-AllowShortBlocksOnASingleLine: true
-AllowShortCaseLabelsOnASingleLine: true
-AllowShortFunctionsOnASingleLine: All
-AllowShortIfStatementsOnASingleLine: false
-AllowShortLoopsOnASingleLine: false
-AlwaysBreakAfterDefinitionReturnType: None
-AlwaysBreakAfterReturnType: None
-AlwaysBreakBeforeMultilineStrings: false
-AlwaysBreakTemplateDeclarations: false
-BinPackArguments: true
-BinPackParameters: false
-BraceWrapping:   
-  AfterClass:      true
-  AfterControlStatement: false
-  AfterEnum:       false
-  AfterFunction:   true
-  AfterNamespace:  false
-  AfterObjCDeclaration: false
-  AfterStruct:     true
-  AfterUnion:      false
-  AfterExternBlock: false
-  BeforeCatch:     false
-  BeforeElse:      false
-  IndentBraces:    false
-  SplitEmptyFunction: false
-  SplitEmptyRecord: false
-  SplitEmptyNamespace: false
-BreakBeforeBinaryOperators: None
-BreakBeforeBraces: Custom
-BreakBeforeInheritanceComma: false
-BreakInheritanceList: BeforeColon
-BreakBeforeTernaryOperators: false
-BreakConstructorInitializersBeforeComma: false
-BreakConstructorInitializers: BeforeComma
-BreakAfterJavaFieldAnnotations: false
-BreakStringLiterals: true
-ColumnLimit:     140
-CommentPragmas:  '^ IWYU pragma:'
-CompactNamespaces: true
-ConstructorInitializerAllOnOneLineOrOnePerLine: true
-ConstructorInitializerIndentWidth: 4
-ContinuationIndentWidth: 4
-Cpp11BracedListStyle: true
-DerivePointerAlignment: false
-DisableFormat:   false
-ExperimentalAutoDetectBinPacking: false
-FixNamespaceComments: true
-ForEachMacros:   
-  - forever
-  - foreach
-  - Q_FOREACH
-  - BOOST_FOREACH
-IncludeBlocks:   Preserve
-IncludeCategories: 
-  - Regex:           '^<Q.*'
-    Priority:        200
-  - Regex:           '^(<|"(gtest|gmock|isl|json)/)'
-    Priority:        3
-  - Regex:           '.*'
-    Priority:        1
-IncludeIsMainRegex: '(Test)?$'
-IndentCaseLabels: false
-IndentPPDirectives: None
-IndentWidth:     4
-IndentWrappedFunctionNames: false
-JavaScriptQuotes: Leave
-JavaScriptWrapImports: true
-#KeepLineBreaksForNonEmptyLines: false
-KeepEmptyLinesAtTheStartOfBlocks: false
-MacroBlockBegin: ''
-MacroBlockEnd:   ''
-MaxEmptyLinesToKeep: 1
-NamespaceIndentation: None
-ObjCBinPackProtocolList: Auto
-ObjCBlockIndentWidth: 4
-ObjCSpaceAfterProperty: false
-ObjCSpaceBeforeProtocolList: true
-PenaltyBreakAssignment: 150
-PenaltyBreakBeforeFirstCallParameter: 300
-PenaltyBreakComment: 500
-PenaltyBreakFirstLessLess: 400
-PenaltyBreakString: 600
-PenaltyBreakTemplateDeclaration: 10
-PenaltyExcessCharacter: 50
-PenaltyReturnTypeOnItsOwnLine: 300
-PointerAlignment: Left
-ReflowComments:  true
-SortIncludes:    false
-SortUsingDeclarations: false
-SpaceAfterCStyleCast: true
-SpaceAfterTemplateKeyword: false
-SpaceBeforeAssignmentOperators: true
-SpaceBeforeCpp11BracedList: false
-SpaceBeforeCtorInitializerColon: true
-SpaceBeforeInheritanceColon: true
-SpaceBeforeParens: ControlStatements
-SpaceBeforeRangeBasedForLoopColon: true
-SpaceInEmptyParentheses: false
-SpacesBeforeTrailingComments: 1
-SpacesInAngles:  false
-SpacesInContainerLiterals: false
-SpacesInCStyleCastParentheses: false
-SpacesInParentheses: false
-SpacesInSquareBrackets: false
-Standard:        Cpp11
-TabWidth:        4
-UseTab:          Never
-

.claude/commands/commit-push-pr.md

@@ -1,19 +0,0 @@
----
-allowed-tools: Bash(git checkout --branch:*), Bash(git add:*), Bash(git status:*), Bash(git push:*), Bash(git commit:*), Bash(gh pr create:*)
-description: Commit, push, and open a PR
----
-
-## Context
-
-- Current git status: !`git status`
-- Current git diff (staged and unstaged changes): !`git diff HEAD`
-- Current branch: !`git branch --show-current`
-
-## Your task
-
-Based on the above changes:
-1. Create a new branch if on main
-2. Create a single commit with an appropriate message
-3. Push the branch to origin
-4. Create a pull request using `gh pr create`
-5. You have the capability to call multiple tools in a single response. You MUST do all of the above in a single message. Do not use any other tools or do anything else. Do not send any other text or messages besides these tool calls.

.claude/commands/dedupe.md

@@ -1,38 +0,0 @@
----
-allowed-tools: Bash(gh issue view:*), Bash(gh search:*), Bash(gh issue list:*), Bash(gh api:*), Bash(gh issue comment:*)
-description: Find duplicate GitHub issues
----
-
-Find up to 3 likely duplicate issues for a given GitHub issue.
-
-To do this, follow these steps precisely:
-
-1. Use an agent to check if the Github issue (a) is closed, (b) does not need to be deduped (eg. because it is broad product feedback without a specific solution, or positive feedback), or (c) already has a duplicates comment that you made earlier. If so, do not proceed.
-2. Use an agent to view a Github issue, and ask the agent to return a summary of the issue
-3. Then, launch 5 parallel agents to search Github for duplicates of this issue, using diverse keywords and search approaches, using the summary from #1
-4. Next, feed the results from #1 and #2 into another agent, so that it can filter out false positives, that are likely not actually duplicates of the original issue. If there are no duplicates remaining, do not proceed.
-5. Finally, comment back on the issue with a list of up to three duplicate issues (or zero, if there are no likely duplicates)
-
-Notes (be sure to tell this to your agents, too):
-
-- Use `gh` to interact with Github, rather than web fetch
-- Do not use other tools, beyond `gh` (eg. don't use other MCP servers, file edit, etc.)
-- Make a todo list first
-- For your comment, follow the following format precisely (assuming for this example that you found 3 suspected duplicates):
-
----
-
-Found 3 possible duplicate issues:
-
-1. <link to issue>
-2. <link to issue>
-3. <link to issue>
-
-This issue will be automatically closed as a duplicate in 3 days.
-
-- If your issue is a duplicate, please close it and 👍 the existing issue instead
-- To prevent auto-closure, add a comment or 👎 this comment
-
-🤖 OrcaSlicer bot
-
----

.claude/commands/oncall-triage.md

@@ -1,40 +0,0 @@
----
-allowed-tools: Bash(gh issue list:*), Bash(gh issue view:*), Bash(gh issue edit:*), TodoWrite
-description: Triage GitHub issues and label critical ones for oncall
----
-
-You're an oncall triage assistant for GitHub issues. Your task is to identify critical issues that require immediate oncall attention and apply the "oncall" label.
-
-Repository: OrcaSlicer/OrcaSlicer
-
-Task overview:
-
-1. First, get all open bugs updated in the last 3 days with at least 50 engagements:
-   ```bash
-   gh issue list --repo OrcaSlicer/OrcaSlicer --state open --label bug --limit 1000 --json number,title,updatedAt,comments,reactions | jq -r '.[] | select((.updatedAt >= (now - 259200 | strftime("%Y-%m-%dT%H:%M:%SZ"))) and ((.comments | length) + ([.reactions[].content] | length) >= 50)) | "\(.number)"'
-   ```
-
-2. Save the list of issue numbers and create a TODO list with ALL of them. This ensures you process every single one.
-
-3. For each issue in your TODO list:
-   - Use `gh issue view <number> --repo OrcaSlicer/OrcaSlicer --json title,body,labels,comments` to get full details
-   - Read and understand the full issue content and comments to determine actual user impact
-   - Evaluate: Is this truly blocking users from using Claude Code?
-     - Consider: "crash", "stuck", "frozen", "hang", "unresponsive", "cannot use", "blocked", "broken"
-     - Does it prevent core functionality? Can users work around it?
-   - Be conservative - only flag issues that truly prevent users from getting work done
-
-4. For issues that are truly blocking and don't already have the "oncall" label:
-   - Use `gh issue edit <number> --repo OrcaSlicer/OrcaSlicer --add-label "oncall"`
-   - Mark the issue as complete in your TODO list
-
-5. After processing all issues, provide a summary:
-   - List each issue number that received the "oncall" label
-   - Include the issue title and brief reason why it qualified
-   - If no issues qualified, state that clearly
-
-Important:
-- Process ALL issues in your TODO list systematically
-- Don't post any comments to issues
-- Only add the "oncall" label, never remove it
-- Use individual `gh issue view` commands instead of bash for loops to avoid approval prompts

.cursorignore

@@ -1,10 +0,0 @@
-# Add directories or file patterns to ignore during indexing (e.g. foo/ or *.csv)
-deps/
-build_*/
-build/
-localization/
-sandboxes/
-resources/*
-!resources/web/
-!resources/dailytip
-!resources/shaders

.devcontainer/Dockerfile

@@ -1,2 +0,0 @@
-ARG BASE_IMAGE
-FROM ${BASE_IMAGE}

.devcontainer/devcontainer.json

@@ -1,44 +0,0 @@
-{
-	"name": "OrcaSlicer",
-	"build": {
-		"dockerfile": "Dockerfile",
-			"args": {
-				"PLATFORM": "linux/amd64",
-				"BASE_IMAGE": "mcr.microsoft.com/devcontainers/cpp:ubuntu-24.04"
-			},
-			"options": ["--platform=linux/amd64"]
-	},
-	"runArgs": ["--platform=linux/amd64"],
-    "features": {
-        "ghcr.io/devcontainers/features/desktop-lite:1": {
-			"password": "orca"
-		}
-    },
-	"customizations": {
-		"vscode": {
-			"settings": {
-			},
-			
-			// Add the IDs of extensions you want installed when the container is created.
-			"extensions": [
-				"ms-vscode.cmake-tools",
-				"ms-vscode.cpptools-extension-pack"
-			]
-		}
-	},
-	
-    "forwardPorts": [6080],
-	"portsAttributes": {
-		"6080": {
-			"label": "VNC web client (noVNC)",
-			"onAutoForward": "silent"
-		}
-    },
-	"otherPortsAttributes": {
-		"onAutoForward": "ignore"
-	},
-	"onCreateCommand": {
-		"Set postCreate executable flag": "chmod +x .devcontainer/postCreate.sh"
-	},
-	"postCreateCommand": "sudo .devcontainer/postCreate.sh"
-}

.devcontainer/postCreate.sh

@@ -1,15 +0,0 @@
-#!/bin/bash
-# Update and upgrade all system packages
-apt update
-apt upgrade -y          
-
-build_linux="./build_linux.sh -u"
-echo "-----------------------------------------"	
-echo "Running ${build_linux}..."
-echo "-----------------------------------------"	
-${build_linux}
-
-echo "------------------------------"
-echo "Installing missing packages..."
-echo "------------------------------"
-apt install -y libgl1-mesa-dev m4 autoconf libtool

.dockerignore

@@ -1,30 +0,0 @@
-Build
-Build.bat
-/build/
-deps/build
-MYMETA.json
-MYMETA.yml
-_build
-blib
-xs/buildtmp
-*.o
-*.log
-MANIFEST.bak
-xs/MANIFEST.bak
-xs/assertlib*
-.init_bundle.ini
-.vs/*
-local-lib
-/src/TAGS
-/.vscode/
-build-linux/*
-deps/build-linux/*
-**/.DS_Store
-install_*
-build_*/
-!build_linux.sh
-SVG
-scripts/Dockerfile
-scripts/DockerBuild.sh
-scripts/DockerRun.sh
-scripts/.dockerignore

.gitattributes

@@ -1,2 +0,0 @@
-# Set the default behavior, in case people don't have core.autocrlf set.
-* text=auto

.github/CONTRIBUTING.md

@@ -0,0 +1,21 @@
+Did you encounter an issue with using Slic3r? Fear not! This guide will help you to write a good bug report in just a few, simple steps.
+
+There is a good chance that the issue, you have encountered, is already reported. Please check the [list of reported issues](https://github.com/alexrj/Slic3r/issues) before creating a new issue report. If you find an existing issue report, feel free to add further information to that report.
+
+If possible, please include the following information when [reporting an issue](https://github.com/alexrj/Slic3r/issues/new):
+* Slic3r version (See the about dialog for the version number. If running from git, please include the git commit ID from `git rev-parse HEAD` also.)
+* Operating system type + version
+* Steps to reproduce the issue, including:
+    * Command line parameters used, if any
+    * Slic3r configuration file (Use ``Export Config...`` from the ``File`` menu - please don't export a bundle)
+    * Expected result
+    * Actual result
+    * Any error messages
+* If the issue is related to G-code generation, please include the following:
+    * STL, OBJ or AMF input file (please make sure the input file is not broken, e.g. non-manifold, before reporting a bug)
+    * a screenshot of the G-code layer with the issue (e.g. using [Pronterface](https://github.com/kliment/Printrun))
+
+Please make sure only to include one issue per report. If you encounter multiple, unrelated issues, please report them as such.
+
+Simon Tatham has written an excellent on article on [How to Report Bugs Effectively](http://www.chiark.greenend.org.uk/~sgtatham/bugs.html) which is well worth reading, although it is not specific to Slic3r.
+

.github/FUNDING.yml

@@ -1,3 +0,0 @@
-github: SoftFever
-ko_fi: SoftFever
-custom: https://paypal.me/softfever3d

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,22 @@
+### Version
+_Version of Slic3r used goes here_
+
+_Use `About->About Slic3r` for release versions_
+
+_For -dev versions, use `git describe --tag` or get the hash value for the version you downloaded or `git rev-parse HEAD`_
+
+### Operating system type + version
+_What OS are you using, and state any version #s_
+
+### Behavior
+* _Describe the problem_
+* _Steps needed to reproduce the problem_
+  * _If this is a command-line slicing issue, include the options used_
+* _Expected Results_
+* _Actual Results_
+  * _Screenshots from __*Slic3r*__ preview are preferred_
+
+_Is this a new feature request?_
+
+#### STL/Config (.ZIP) where problem occurs
+_Upload a zipped copy of an STL and your config (`File -> Export Config`)_

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -1,142 +0,0 @@
-name: 🐞 Bug Report
-description: File a bug report
-labels: ["bug"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        **Thank you for using Orca Slicer and wanting to report a bug.**
-        
-        Please note that this is not the place to make feature requests or ask for help.
-        For this, please use the [Feature request](https://github.com/OrcaSlicer/OrcaSlicer/issues/new?assignees=&labels=&projects=&template=feature_request.yml) issue type or you can discuss your idea on our [Discord server](https://discord.gg/P4VE9UY9gJ) with others.
-        
-        Before filing, please check if the issue already exists (either open or closed) by using the search bar on the issues page. If it does, comment there. Even if it's closed, we can reopen it based on your comment.
-  - type: checkboxes
-    attributes:
-      label: Is this issue reproducible in the latest nightly build?
-      description: >
-        Please verify this issue still happens in the latest nightly build first. It may already be fixed there:
-        [Nightly builds](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds).
-      options:
-        - label: I have checked the latest nightly build and the issue is still reproducible
-          required: true
-  - type: checkboxes
-    attributes:
-      label: Is there an existing issue for this problem?
-      description: Please search to see if an issue already exists for the bug you encountered.
-      options:
-        - label: I have searched the existing issues
-          required: true
-  - type: input
-    id: version
-    attributes:
-      label: OrcaSlicer Version
-      description: Which version of Orca Slicer are you running? You can see the full version in `Help` -> `About Orca Slicer`.
-      placeholder: e.g. 1.9.0
-    validations:
-      required: true
-  - type: dropdown
-    id: os_type
-    attributes:
-      label: "Operating System (OS)"
-      description: "What OSes are you are experiencing issues on?"
-      multiple: true
-      options:
-        - Linux
-        - macOS
-        - Windows
-    validations:
-      required: true
-  - type: input
-    id: os_version
-    attributes:
-      label: "OS Version"
-      description: "What OS version does this relate to?"
-      placeholder: "i.e. OS: Windows 7/8/10/11 ..., Ubuntu 22.04/Fedora 36 ..., macOS 10.15/11.1/12.3 ..."
-    validations:
-      required: true
-  - type: textarea
-    id: system_info
-    attributes:
-      label: Additional system information
-      description: For the performance issue, please also show the CPU, Memory information; For the 3D Rendering issue, please also show the Display Card information.
-      placeholder: |
-        CPU: 11th gen Intel r core tm i7-1185g7/AMD Ryzen 7 6800h/...
-        Memory: 32/16 GB...
-        Display Card: NVIDIA Quadro P400/...
-    validations:
-      required: false
-  - type: input
-    id: printer
-    attributes:
-      label: Printer
-      description: Which printer was selected
-      placeholder: Voron 2.4/VzBot/Prusa MK4/Bambu Lab X1 series/Bambu Lab P1P/...
-    validations:
-      required: true
-  - type: textarea
-    id: reproduce_steps
-    attributes:
-      label: How to reproduce
-      description: Please described the detailed steps to reproduce this issue
-      placeholder: |
-        1. Go to '...'
-        2. Click on '...'
-        3. Scroll down to '...'
-        4. See error
-    validations:
-      required: true
-  - type: textarea
-    id: actual_results
-    attributes:
-      label: Actual results
-      description: What happens after the above steps? Please, enclose a screenshot whenever possible (even when you think the description is clear). 
-    validations:
-      required: true
-  - type: textarea
-    id: expected_results
-    attributes:
-      label: Expected results
-      description: What should happen after the above steps?
-    validations:
-      required: true
-  - type: markdown
-    id: file_required
-    attributes:
-      value: |
-        Please be sure to add the following files:
-          * Please upload a ZIP archive containing the **project file** used when the problem arise. Please export it just before or after the problem occurs. Even if you did nothing and/or there is no object, export it! (We need the configurations in project file).
-            You can export the project file from the application menu in `File`->`Save project as...`, then zip it
-          * A **log file** for crashes and similar issues.
-            You can find your log file here:
-            Windows: `%APPDATA%\OrcaSlicer\log` or usually `C:\Users\<your username>\AppData\Roaming\OrcaSlicer\log`
-            MacOS: `$HOME/Library/Application Support/OrcaSlicer/log`
-            Linux: `$HOME/.config/OrcaSlicer/log`
-            If Orca Slicer still starts, you can also reach this directory from the application menu in `Help` -> `Show Configuration Folder`
-            You can zip the log directory, or just select the newest logs when this issue happens, and zip them
-  - type: textarea
-    id: file_uploads
-    attributes:
-      label: Project file & Debug log uploads
-      description:  Drop the project file and debug log here
-      placeholder: |
-        Project File: `File` -> `Save project as...` then zip it & drop it here
-        Log File:  `Help` -> `Show Configuration Folder`, then zip the log directory, or just select the newest logs in `log` when this issue happens and zip them, then drop the zip file here
-    validations:
-      required: true
-  - type: checkboxes
-    id: file_checklist
-    attributes:
-      label: Checklist of files to include
-      options:
-        - label: Log file
-        - label: Project file
-  - type: textarea
-    attributes:
-      label: Anything else?
-      description: |
-        Screenshots? References? Anything that will give us more context about the issue you are encountering!
-
-        Tip: You can attach images or log files by clicking this area to highlight it and then dragging files in.
-    validations:
-      required: false

.github/ISSUE_TEMPLATE/config.yml

@@ -1,8 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: Community Support (Discord channel)
-    url: https://discord.gg/P4VE9UY9gJ
-    about: Please ask and answer support "how do I?"questions here.
-  - name: Discussion Forum
-    url: https://github.com/OrcaSlicer/OrcaSlicer/discussions
-    about: Please raise ideas and feature suggestions here.

.github/ISSUE_TEMPLATE/feature_request.yml

@@ -1,66 +0,0 @@
-name: 🚀 Feature Request / Enhancement
-description: Suggest an improvement to make Orca Slicer even better!
-labels: ["enhancement"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Thanks for taking the time to fill out this feature request!
-
-        If your idea is still at the formulation stage, or you're not sure it would
-        be useful to many users, you can raise it as a discussion topic under [Ideas](https://github.com/OrcaSlicer/OrcaSlicer/discussions/categories/ideas)
-        or you can raise it on the [Discord server](https://discord.gg/P4VE9UY9gJ).
-  - type: checkboxes
-    attributes:
-      label: Is there an existing issue for this feature request?
-      description: |
-        Please search to see if an issue already exists for a feature, or perhaps one similar.
-        You can then comment and react so that we know know much interest there is in the feature request.
-      options:
-        - label: I have searched the existing issues
-          required: true
-  - type: textarea
-    attributes:
-      label: Is your feature request related to a problem?
-      description: A clear and concise description of what the problem is.
-      placeholder: I'm always frustrated when [...]
-    validations:
-      required: true
-  - type: dropdown
-    attributes:
-      label: Which printers will be beneficial to this feature?
-      description: Select affected printer firmware type.
-      multiple: true
-      options: 
-        - Klipper
-        - Marlin
-        - Others
-        - All
-    validations:
-      required: true
-  - type: textarea
-    attributes:
-      label: Describe the solution you'd like
-      description: A clear and concise description of what you want to happen.
-      placeholder: It should do [...]
-    validations:
-      required: true
-  - type: textarea
-    attributes:
-      label: Describe alternatives you've considered
-      description: A clear and concise description of any alternative solutions or features you've considered.
-      placeholder: |
-        1. [...]
-        2. [...]
-        3. [...]
-    validations:
-      required: false
-  - type: textarea
-    attributes:
-      label: Additional context
-      description: |
-        Add any other context, diagrams, illustations or screenshots about the feature request here.
-
-        Tip: You can attach images or log files by clicking this area to highlight it and then dragging files in.
-    validations:
-      required: false

.github/actions/apt-install-deps/action.yml

@@ -1,11 +0,0 @@
-name: 'Apt Install Deps'
-description: 'Install the packages needed for building and deploying'
-runs:
-  using: 'composite'
-  steps:
-    - name: Install dependencies from build_linux.sh
-      shell: bash
-      run: |
-        mkdir -p ${{ github.workspace }}/deps/build/destdir
-        sudo env "ORCA_UPDATER_SIG_KEY=$ORCA_UPDATER_SIG_KEY" ./build_linux.sh -ur
-        sudo chown $USER -R ./

.github/dependabot.yml

@@ -1,18 +0,0 @@
-version: 2
-updates:
-  # Only care about major updates to github actions
-  - package-ecosystem: "github-actions"
-    directory: "/"
-    schedule:
-      interval: "monthly"
-    ignore: # Only suggest major updates for built-in actions
-      - dependency-name: "github/*"
-        update-types: ["version-update:semver-patch", "version-update:semver-minor"]
-      - dependency-name: "actions/*"
-        update-types: ["version-update:semver-patch", "version-update:semver-minor"]
-  # Docker dependencies
-  - package-ecosystem: "docker"
-    directory: "/"
-    schedule:
-      interval: "monthly"
-  # no support for c/cpp

.github/pull_request_template.md

@@ -1,27 +0,0 @@
-# Description
-
-<!--
-> Please provide a summary of the changes made in this PR. Include details such as:
-  > * What issue does this PR address or fix?
-  > * What new features or enhancements does this PR introduce?
-  > * Are there any breaking changes or dependencies that need to be considered?
--->
-
-# Screenshots/Recordings/Graphs
-
-<!--
-> Please attach relevant screenshots to showcase the UI changes.
-> Please attach images that can help explain the changes.
--->
-
-## Tests
-
-<!--
-> Please describe the tests that you have conducted to verify the changes made in this PR.
--->
-
-<!--
-> A guide for users on how to download the artifacts from this PR.
--->
-
-[How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)

.github/workflows/assign.yml

@@ -1,26 +0,0 @@
-name: Assign Issue
-
-on:
-  schedule:
-    - cron: 0 0 * * *
-  issue_comment:
-    types: [created]
-  workflow_dispatch:
-
-jobs:
-  assign:
-    permissions:
-      issues: write
-    runs-on: ubuntu-latest
-    steps:
-      - name: Assign the user or unassign stale assignments
-        # Note: v3.0.0 is broken (dist/index.mjs vs action.yml expects index.js)
-        # See: https://github.com/takanome-dev/assign-issue-action/issues/426
-        uses: takanome-dev/assign-issue-action@v2.2
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          maintainers: 'noisyfox,softfever'
-          days_until_unassign: 30
-          block_assignment: false
-          reminder_days: 7
-          max_assignments: 12

.github/workflows/auto-close-duplicates.yml

@@ -1,31 +0,0 @@
-name: Auto-close duplicate issues
-description: Auto-closes issues that are duplicates of existing issues
-on:
-  schedule:
-    - cron: "0 9 * * *"
-  workflow_dispatch:
-
-jobs:
-  auto-close-duplicates:
-    runs-on: ubuntu-latest
-    timeout-minutes: 10
-    permissions:
-      contents: read
-      issues: write
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v6
-
-      - name: Setup Bun
-        uses: oven-sh/setup-bun@v2
-        with:
-          bun-version: latest
-
-      - name: Auto-close duplicate issues
-        run: bun run scripts/auto-close-duplicates.ts
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          GITHUB_REPOSITORY_OWNER: ${{ github.repository_owner }}
-          GITHUB_REPOSITORY_NAME: ${{ github.event.repository.name }}
-          STATSIG_API_KEY: ${{ secrets.STATSIG_API_KEY }}

.github/workflows/backfill-duplicate-comments.yml

@@ -1,44 +0,0 @@
-name: Backfill Duplicate Comments
-description: Triggers duplicate detection for old issues that don't have duplicate comments
-
-on:
-  workflow_dispatch:
-    inputs:
-      days_back:
-        description: 'How many days back to look for old issues'
-        required: false
-        default: '90'
-        type: string
-      dry_run:
-        description: 'Dry run mode (true to only log what would be done)'
-        required: false
-        default: 'true'
-        type: choice
-        options:
-          - 'true'
-          - 'false'
-
-jobs:
-  backfill-duplicate-comments:
-    runs-on: ubuntu-latest
-    timeout-minutes: 30
-    permissions:
-      contents: read
-      issues: read
-      actions: write
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v6
-      
-      - name: Setup Bun
-        uses: oven-sh/setup-bun@v2
-        with:
-          bun-version: latest
-      
-      - name: Backfill duplicate comments
-        run: bun run scripts/backfill-duplicate-comments.ts
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          DAYS_BACK: ${{ inputs.days_back }}
-          DRY_RUN: ${{ inputs.dry_run }}

.github/workflows/build_all.yml

@@ -1,236 +0,0 @@
-name: Build all
-
-on:
-  push:
-    branches:
-     - main
-     - release/*
-    paths:
-     - 'deps/**'
-     - 'src/**'
-     - '**/CMakeLists.txt'
-     - 'version.inc'
-     - 'localization/**'
-     - 'resources/**'
-     - ".github/workflows/build_*.yml"
-     - 'scripts/flatpak/**'
-
-  pull_request:
-    branches:
-     - main
-     - release/*
-    paths:
-     - 'deps/**'
-     - 'deps_src/**'
-     - 'src/**'
-     - '**/CMakeLists.txt'
-     - 'version.inc'
-     - ".github/workflows/build_*.yml"
-     - 'build_linux.sh'
-     - 'build_release_vs2022.bat'
-     - 'build_release_macos.sh'
-     - 'scripts/flatpak/**'
-
-
-  schedule:
-      - cron: '0 17 * * *' # run once a day at 1 AM Singapore time (UTC+8)
-
-  workflow_dispatch: # allows for manual dispatch
-    inputs:
-      build-deps-only:
-        description: 'Only build dependencies (bypasses caching)'
-        type: boolean
-        default: false
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event_name }}-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-  
-
-jobs:
-  build_linux:
-    strategy:
-      fail-fast: false
-    # Don't run scheduled builds on forks:
-    if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
-    uses: ./.github/workflows/build_check_cache.yml
-    with:
-      os: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }}
-      build-deps-only: ${{ inputs.build-deps-only || false }}
-    secrets: inherit
-  build_windows:
-    # Don't run scheduled builds on forks:
-    if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
-    uses: ./.github/workflows/build_check_cache.yml
-    with:
-      os: ${{ vars.SELF_HOSTED && 'orca-win-server' || 'windows-latest' }}
-      build-deps-only: ${{ inputs.build-deps-only || false }}
-      force-build: ${{ github.event_name == 'schedule' }}
-    secrets: inherit
-  build_macos_arch:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - arm64
-          - x86_64
-    # Don't run scheduled builds on forks:
-    if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
-    uses: ./.github/workflows/build_check_cache.yml
-    with:
-      os: ${{ vars.SELF_HOSTED && 'orca-macos-arm64' || 'macos-14' }}
-      arch: ${{ matrix.arch }}
-      build-deps-only: ${{ inputs.build-deps-only || false }}
-      force-build: ${{ github.event_name == 'schedule' }}
-    secrets: inherit
-  build_macos_universal:
-    name: Build macOS Universal
-    needs: build_macos_arch
-    if: ${{ !cancelled() && needs.build_macos_arch.result == 'success' && !inputs.build-deps-only && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
-    uses: ./.github/workflows/build_orca.yml
-    with:
-      os: ${{ vars.SELF_HOSTED && 'orca-macos-arm64' || 'macos-14' }}
-      arch: universal
-      macos-combine-only: true
-    secrets: inherit
-  unit_tests:
-    name: Unit Tests
-    runs-on: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }}
-    needs: build_linux
-    if: ${{ !cancelled() && success() }}
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-        with:
-          sparse-checkout: |
-            .github
-            scripts
-            tests
-      - name: Apt-Install Dependencies
-        if: ${{ !vars.SELF_HOSTED }}
-        uses: ./.github/actions/apt-install-deps
-      - name: Restore Test Artifact
-        uses: actions/download-artifact@v8
-        with:
-          name: ${{ github.sha }}-tests
-      - uses: lukka/get-cmake@latest
-        with:
-          cmakeVersion: "~4.3.0"  # use most recent 4.3.x version
-          useLocalCache: true         # <--= Use the local cache (default is 'false').
-          useCloudCache: true
-      - name: Unpackage and Run Unit Tests
-        timeout-minutes: 20
-        run: |
-          tar -xvf build_tests.tar
-          scripts/run_unit_tests.sh
-      - name: Upload Test Logs
-        uses: actions/upload-artifact@v7
-        if: ${{ failure() }}
-        with:
-          name: unit-test-logs
-          path: build/tests/**/*.log
-      - name: Publish Test Results
-        if: always()
-        uses: EnricoMi/publish-unit-test-result-action@v2
-        with:
-          files: "ctest_results.xml"
-      - name: Delete Test Artifact
-        if: success()
-        uses: geekyeggo/delete-artifact@v6
-        with:
-          name: ${{ github.sha }}-tests
-  flatpak:
-    name: "Flatpak"
-    container:
-      image: ghcr.io/flathub-infra/flatpak-github-actions:gnome-50
-      options: --privileged
-      volumes:
-        - /usr/local/lib/android:/usr/local/lib/android
-        - /usr/share/dotnet:/usr/share/dotnet
-        - /opt/ghc:/opt/ghc1
-        - /usr/local/share/boost:/usr/local/share/boost1
-        - /opt/hostedtoolcache:/opt/hostedtoolcache1
-    strategy:
-      fail-fast: false
-      matrix:
-        variant:
-          - arch: x86_64
-            runner: ubuntu-24.04
-          - arch: aarch64
-            runner: ubuntu-24.04-arm
-    # Don't run scheduled builds on forks; skip entirely on self-hosted runners
-    if: ${{ !cancelled() && !vars.SELF_HOSTED && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
-
-    runs-on: ${{ matrix.variant.runner }}
-    env:
-      date:
-      ver:
-      ver_pure:
-    steps:
-    - name: "Remove unneeded stuff to free disk space"
-      run:
-        rm -rf /usr/local/lib/android/* /usr/share/dotnet/* /opt/ghc1/* "/usr/local/share/boost1/*" /opt/hostedtoolcache1/*
-    - uses: actions/checkout@v6
-    - name: Get the version and date
-      run: |
-        ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
-        if [[ "${{ github.event_name }}" == "pull_request" ]]; then
-          ver="PR-${{ github.event.number }}"
-          git_commit_hash="${{ github.event.pull_request.head.sha }}"
-        else
-          ver=V$ver_pure
-          git_commit_hash="${{ github.sha }}"
-        fi
-        echo "ver=$ver" >> $GITHUB_ENV
-        echo "ver_pure=$ver_pure" >> $GITHUB_ENV
-        echo "date=$(date +'%Y%m%d')" >> $GITHUB_ENV
-        echo "git_commit_hash=$git_commit_hash" >> $GITHUB_ENV
-      shell: bash
-    # Manage flatpak-builder cache externally so PRs restore but never upload
-    - name: Restore flatpak-builder cache
-      if: github.event_name == 'pull_request'
-      uses: actions/cache/restore@v5
-      with:
-        path: .flatpak-builder
-        key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.event.pull_request.base.sha }}
-        restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
-    - name: Save/restore flatpak-builder cache
-      if: github.event_name != 'pull_request'
-      uses: actions/cache@v5
-      with:
-        path: .flatpak-builder
-        key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.sha }}
-        restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
-    - name: Disable debug info for faster CI builds
-      run: |
-        sed -i '/^build-options:/a\  no-debuginfo: true\n  strip: true' \
-          scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
-      shell: bash
-    - name: Inject git commit hash into Flatpak manifest
-      run: |
-        sed -i "/name: OrcaSlicer/{n;s|buildsystem: simple|buildsystem: simple\n    build-options:\n      env:\n        git_commit_hash: \"$git_commit_hash\"|}" \
-          scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
-      shell: bash
-    - uses: flatpak/flatpak-github-actions/flatpak-builder@master
-      with:
-        bundle: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        manifest-path: scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
-        cache: false
-        arch: ${{ matrix.variant.arch }}
-        upload-artifact: false
-    - name: Upload artifacts Flatpak
-      uses: actions/upload-artifact@v7
-      with:
-        name: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        path: '/__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak'
-    - name: Deploy Flatpak to nightly release
-      if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main'
-      uses: WebFreak001/deploy-nightly@v3.2.0
-      with:
-        upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
-        release_id: 137995723
-        asset_path: /__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        asset_name: OrcaSlicer-Linux-flatpak_nightly_${{ matrix.variant.arch }}.flatpak
-        asset_content_type: application/octet-stream
-        max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
-

.github/workflows/build_check_cache.yml

@@ -1,64 +0,0 @@
-name: Check Cache
-
-on:
-  workflow_call:
-    inputs:
-      os:
-        required: true
-        type: string
-      arch:
-        required: false
-        type: string
-      build-deps-only:
-        required: false
-        type: boolean
-      force-build:
-        required: false
-        type: boolean
-  
-jobs:
-  check_cache: # determines if there is a cache and outputs variables used in caching process
-    name: Check Cache
-    runs-on: ${{ inputs.os }}
-    outputs:
-      cache-key: ${{ steps.set_outputs.outputs.cache-key }}
-      cache-path: ${{ steps.set_outputs.outputs.cache-path }}
-      valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-        with:
-          lfs: 'false'
-        
-      - name: set outputs
-        id: set_outputs
-        env:
-          # Keep macOS cache keys and paths architecture-specific.
-          cache-os: ${{ runner.os == 'macOS' && format('macos-{0}', inputs.arch) || (runner.os == 'Windows' && 'windows' || 'linux-clang') }}
-          dep-folder-name: ${{ runner.os == 'macOS' && format('/{0}', inputs.arch) || '/OrcaSlicer_dep' }}
-          output-cmd: ${{ runner.os == 'Windows' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
-        run: |
-          echo cache-key=${{ env.cache-os }}-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }} >> ${{ env.output-cmd }}
-          echo cache-path=${{ github.workspace }}/deps/build${{ env.dep-folder-name }} >> ${{ env.output-cmd }}
-            
-      - name: load cache
-        id: cache_deps
-        uses: actions/cache@v5
-        with:
-          path: ${{ steps.set_outputs.outputs.cache-path }}
-          key: ${{ steps.set_outputs.outputs.cache-key }}
-          lookup-only: true
-        
-  build_deps: # call next step
-    name: Build Deps
-    needs: [check_cache]
-    uses: ./.github/workflows/build_deps.yml
-    with:
-      cache-key: ${{ needs.check_cache.outputs.cache-key }}
-      cache-path: ${{ needs.check_cache.outputs.cache-path }}
-      valid-cache: ${{ needs.check_cache.outputs.valid-cache == 'true' }}
-      os: ${{ inputs.os }}
-      arch: ${{ inputs.arch }}
-      build-deps-only: ${{ inputs.build-deps-only }}
-      force-build: ${{ inputs.force-build }}
-    secrets: inherit

.github/workflows/build_deps.yml

@@ -1,140 +0,0 @@
-on:
-  workflow_call:
-    inputs:
-      cache-key:
-        required: true
-        type: string
-      cache-path:
-        required: true
-        type: string
-      valid-cache:
-        required: true
-        type: boolean
-      os:
-        required: true
-        type: string
-      arch:
-        required: false
-        type: string
-      build-deps-only:
-        required: false
-        type: boolean
-      force-build:
-        required: false
-        type: boolean
-
-jobs:
-  build_deps:
-    name: Build Deps
-    if: ${{ !cancelled() && (inputs.build-deps-only || inputs.force-build || inputs.valid-cache != true) }}
-    runs-on: ${{ inputs.os }}
-    env:
-      date:
-    steps:
-
-      # Setup the environment
-      - name: Checkout
-        uses: actions/checkout@v6
-        with:
-          lfs: 'false'
-
-      - name: load cached deps
-        uses: actions/cache@v5
-        with:
-          path: ${{ inputs.cache-path }}
-          key: ${{ inputs.cache-key }}
-
-      - uses: lukka/get-cmake@latest
-        with:
-          cmakeVersion: "~4.3.0"  # use most recent 4.3.x version
-          useLocalCache: true         # <--= Use the local cache (default is 'false').
-          useCloudCache: true
-
-      - name: setup dev on Windows
-        if: runner.os == 'Windows'
-        uses: microsoft/setup-msbuild@v3
-
-      - name: Get the date on Ubuntu and macOS
-        if: runner.os != 'Windows'
-        run: echo "date=$(date +'%Y%m%d')" >> $GITHUB_ENV
-        shell: bash
-
-      - name: Get the date on Windows
-        if: runner.os == 'Windows'
-        run: echo "date=$(Get-Date -Format 'yyyyMMdd')" | Out-File -Append -FilePath $env:GITHUB_ENV -Encoding utf8
-        shell: pwsh
-
-
-      # Build Dependencies
-      - name: Build on Windows
-        if: runner.os == 'Windows'
-        working-directory: ${{ github.workspace }}
-        run: |
-            if (-not "${{ vars.SELF_HOSTED }}") {
-              choco install strawberryperl
-            }
-            .\build_release_vs.bat deps
-            .\build_release_vs.bat pack
-        shell: pwsh
-
-      - name: Build on Mac ${{ inputs.arch }}
-        if: runner.os == 'macOS'
-        working-directory: ${{ github.workspace }}
-        run: |
-            if [ -z "${{ vars.SELF_HOSTED }}" ]; then
-              brew install automake texinfo libtool
-            fi
-            ./build_release_macos.sh -dx ${{ !vars.SELF_HOSTED && '-1' || '' }} -a ${{ inputs.arch }} -t 10.15
-            (cd "${{ github.workspace }}/deps/build/${{ inputs.arch }}" && \
-            find . -mindepth 1 -maxdepth 1 ! -name 'OrcaSlicer_dep' -exec rm -rf {} +)
-
-
-      - name: Apt-Install Dependencies
-        if: runner.os == 'Linux' && !vars.SELF_HOSTED
-        uses: ./.github/actions/apt-install-deps
-
-      - name: Build on Ubuntu
-        if: runner.os == 'Linux'
-        working-directory: ${{ github.workspace }}
-        run: |
-            mkdir -p ${{ github.workspace }}/deps/build/destdir
-            ./build_linux.sh -drlL
-            cd deps/build
-            tar -czvf OrcaSlicer_dep_ubuntu_$(date +"%Y%m%d").tar.gz destdir
-
-
-      # Upload Artifacts
-      # - name: Upload Mac ${{ inputs.arch }} artifacts
-      #   if: runner.os == 'macOS'
-      #   uses: actions/upload-artifact@v6
-      #   with:
-      #     name: OrcaSlicer_dep_mac_${{ env.date }}
-      #     path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep*.tar.gz
-
-      # - name: Upload Windows artifacts
-      #   if: runner.os == 'Windows'
-      #   uses: actions/upload-artifact@v6
-      #   with:
-      #     name: OrcaSlicer_dep_win64_${{ env.date }}
-      #     path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep*.zip
-
-      # - name: Upload Ubuntu artifacts
-      #   if: runner.os == 'Linux' && !env.ACT
-      #   env:
-      #     ubuntu-ver: '2404'
-      #   uses: actions/upload-artifact@v6
-      #   with:
-      #     name: OrcaSlicer_dep_ubuntu_${{ env.ubuntu-ver }}_${{ env.date }}
-      #     path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep_ubuntu_*.tar.gz
-
-  build_orca:
-    name: Build OrcaSlicer
-    needs: [build_deps]
-    if: ${{ !cancelled() && !inputs.build-deps-only && (inputs.force-build || (inputs.valid-cache == true && needs.build_deps.result == 'skipped') || (inputs.valid-cache != true && success())) }}
-    uses: ./.github/workflows/build_orca.yml
-    with:
-      cache-key: ${{ inputs.cache-key }}
-      cache-path: ${{ inputs.cache-path }}
-      os: ${{ inputs.os }}
-      arch: ${{ inputs.arch }}
-    secrets: inherit

.github/workflows/build_orca.yml

@@ -1,475 +0,0 @@
-on:
-    workflow_call:
-      inputs:
-        cache-key:
-          required: false
-          type: string
-        cache-path:
-          required: false
-          type: string
-        os:
-          required: true
-          type: string
-        arch:
-          required: false
-          type: string
-        macos-combine-only:
-          required: false
-          type: boolean
-          default: false
-
-jobs:
-  build_orca:
-    name: Build OrcaSlicer
-    runs-on: ${{ inputs.os }}
-    env:
-      date:
-      ver:
-      ver_pure:
-      ubuntu-ver: '2404'
-      ubuntu-ver-str: '_Ubuntu2404'
-      ORCA_UPDATER_SIG_KEY: ${{ secrets.ORCA_UPDATER_SIG_KEY }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-        with:
-          lfs: 'false'
-
-      - name: load cached deps
-        if: ${{ !(runner.os == 'macOS' && inputs.macos-combine-only) }}
-        uses: actions/cache@v5
-        with:
-          path: ${{ inputs.cache-path }}
-          key: ${{ inputs.cache-key }}
-          fail-on-cache-miss: true
-
-      - uses: lukka/get-cmake@latest
-        with:
-          cmakeVersion: "~4.3.0"  # use most recent 4.3.x version
-          useLocalCache: true         # <--= Use the local cache (default is 'false').
-          useCloudCache: true
-
-      - name: Get the version and date on Ubuntu and macOS
-        if: runner.os != 'Windows'
-        run: |
-          ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
-          if [[ "${{ github.event_name }}" == "pull_request" ]]; then
-            ver="PR-${{ github.event.number }}"
-            git_commit_hash="${{ github.event.pull_request.head.sha }}"
-          else
-            ver=V$ver_pure
-            git_commit_hash=""
-          fi
-          echo "ver=$ver" >> $GITHUB_ENV
-          echo "ver_pure=$ver_pure" >> $GITHUB_ENV
-          echo "date=$(date +'%Y%m%d')" >> $GITHUB_ENV
-          echo "git_commit_hash=$git_commit_hash" >> $GITHUB_ENV
-        shell: bash
-
-      - name: Get the version and date on Windows
-        if: runner.os == 'Windows'
-        run: |
-          $date = Get-Date -Format 'yyyyMMdd'
-          $ref = "${{ github.ref }}"
-          $eventName = "${{ github.event_name }}"
-          $prNumber = "${{ github.event.number }}"
-
-          if ($eventName -eq 'pull_request') {
-              $ver = "PR" + $prNumber
-              $git_commit_hash = "${{ github.event.pull_request.head.sha }}"
-          } else {
-              $versionContent = Get-Content version.inc -Raw
-              if ($versionContent -match 'set\(SoftFever_VERSION "(.*?)"\)') {
-                  $ver = $matches[1]
-              }
-              $ver = "V$ver"
-              $git_commit_hash = ""
-          }
-
-          echo "ver=$ver" | Out-File -Append -FilePath $env:GITHUB_ENV -Encoding utf8
-          echo "date=$date" | Out-File -Append -FilePath $env:GITHUB_ENV -Encoding utf8
-          echo "git_commit_hash=$git_commit_hash" | Out-File -Append -FilePath $env:GITHUB_ENV -Encoding utf8
-          echo "date: ${{ env.date }} version: ${{ env.ver }}"
-        shell: pwsh
-
-#   Mac
-      - name: Install tools mac
-        if: runner.os == 'macOS' && !inputs.macos-combine-only
-        run: |
-          if [ -z "${{ vars.SELF_HOSTED }}" ]; then
-            brew install libtool
-            brew list
-          fi
-          mkdir -p ${{ github.workspace }}/deps/build/${{ inputs.arch }}
-
-      - name: Free disk space
-        if: runner.os == 'macOS' && !inputs.macos-combine-only && !vars.SELF_HOSTED
-        run: |
-          df -hI /dev/disk3s1s1
-          sudo find /Applications -maxdepth 1 -type d -name "Xcode_*.app" ! -name "Xcode_15.4.app" -exec rm -rf {} +
-          sudo rm -rf ~/Library/Developer/CoreSimulator/Caches/*
-          df -hI /dev/disk3s1s1
-
-      - name: Build slicer mac
-        if: runner.os == 'macOS' && !inputs.macos-combine-only
-        working-directory: ${{ github.workspace }}
-        run: |
-          ./build_release_macos.sh -s -n -x ${{ !vars.SELF_HOSTED && '-1' || '' }} -a ${{ inputs.arch }} -t 10.15
-
-      - name: Pack macOS app bundle ${{ inputs.arch }}
-        if: runner.os == 'macOS' && !inputs.macos-combine-only
-        working-directory: ${{ github.workspace }}
-        run: |
-          tar -czvf OrcaSlicer_Mac_bundle_${{ inputs.arch }}_${{ github.sha }}.tar.gz -C build/${{ inputs.arch }} OrcaSlicer
-
-      - name: Upload macOS app bundle ${{ inputs.arch }}
-        if: runner.os == 'macOS' && !inputs.macos-combine-only
-        uses: actions/upload-artifact@v7
-        with:
-          name: OrcaSlicer_Mac_bundle_${{ inputs.arch }}_${{ github.sha }}
-          path: ${{ github.workspace }}/OrcaSlicer_Mac_bundle_${{ inputs.arch }}_${{ github.sha }}.tar.gz
-
-      - name: Download macOS app bundles
-        if: runner.os == 'macOS' && inputs.macos-combine-only
-        uses: actions/download-artifact@v8
-        with:
-          pattern: OrcaSlicer_Mac_bundle_*_${{ github.sha }}
-          path: ${{ github.workspace }}/mac_bundles
-
-      - name: Extract macOS app bundles
-        if: runner.os == 'macOS' && inputs.macos-combine-only
-        working-directory: ${{ github.workspace }}
-        run: |
-          mkdir -p build/arm64 build/x86_64
-          arm_bundle=$(find "${{ github.workspace }}/mac_bundles/OrcaSlicer_Mac_bundle_arm64_${{ github.sha }}" -name '*.tar.gz' -print -quit)
-          x86_bundle=$(find "${{ github.workspace }}/mac_bundles/OrcaSlicer_Mac_bundle_x86_64_${{ github.sha }}" -name '*.tar.gz' -print -quit)
-          tar -xzvf "$arm_bundle" -C "${{ github.workspace }}/build/arm64"
-          tar -xzvf "$x86_bundle" -C "${{ github.workspace }}/build/x86_64"
-
-      - name: Build universal mac app bundle
-        if: runner.os == 'macOS' && inputs.macos-combine-only
-        working-directory: ${{ github.workspace }}
-        run: |
-          ./build_release_macos.sh -u -x ${{ !vars.SELF_HOSTED && '-1' || '' }} -a universal -t 10.15
-
-      - name: Delete intermediate per-arch artifacts
-        if: runner.os == 'macOS' && inputs.macos-combine-only
-        uses: geekyeggo/delete-artifact@v6
-        with:
-          name: |
-            OrcaSlicer_Mac_bundle_arm64_${{ github.sha }}
-            OrcaSlicer_Mac_bundle_x86_64_${{ github.sha }}
-
- # Thanks to RaySajuuk, it's working now
-      - name: Sign app and notary
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'macOS' && inputs.macos-combine-only
-        working-directory: ${{ github.workspace }}
-        env:
-          BUILD_CERTIFICATE_BASE64: ${{ secrets.BUILD_CERTIFICATE_BASE64 }}
-          P12_PASSWORD: ${{ secrets.P12_PASSWORD }}
-          KEYCHAIN_PASSWORD: ${{ secrets.KEYCHAIN_PASSWORD }}
-          CERTIFICATE_ID: ${{ secrets.MACOS_CERTIFICATE_ID }}
-        run: |
-          CERTIFICATE_PATH=$RUNNER_TEMP/build_certificate.p12
-          KEYCHAIN_PATH=$RUNNER_TEMP/app-signing.keychain-db
-          echo -n "$BUILD_CERTIFICATE_BASE64" | base64 --decode --output $CERTIFICATE_PATH
-          security create-keychain -p $KEYCHAIN_PASSWORD $KEYCHAIN_PATH
-          security set-keychain-settings -lut 21600 $KEYCHAIN_PATH
-          security unlock-keychain -p $KEYCHAIN_PASSWORD $KEYCHAIN_PATH
-          # Set the temporary keychain as the default to prevent codesign from accessing the locked login keychain
-          security default-keychain -s "$KEYCHAIN_PATH"
-          security import $CERTIFICATE_PATH -P $P12_PASSWORD -A -t cert -f pkcs12 -k $KEYCHAIN_PATH
-          security list-keychain -d user -s $KEYCHAIN_PATH
-          security set-key-partition-list -S apple-tool:,apple:,codesign: -s -k $P12_PASSWORD $KEYCHAIN_PATH
-          codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer.app
-          # Sign OrcaSlicer_profile_validator.app if it exists
-          if [ -f "${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ]; then
-            codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app
-          fi
-          
-          # Create main OrcaSlicer DMG without the profile validator helper
-          mkdir -p ${{ github.workspace }}/build/universal/OrcaSlicer_dmg
-          rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/*
-          cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer.app ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/
-          ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/Applications
-          hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_dmg -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          
-          # Create separate OrcaSlicer_profile_validator DMG if the app exists
-          if [ -f "${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ]; then
-            mkdir -p ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg
-            rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/*
-            cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/
-            ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/Applications
-            hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-            codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-          fi
-          
-          # Notarize main DMG
-          xcrun notarytool submit "OrcaSlicer_Mac_universal_${{ env.ver }}.dmg" --apple-id "${{ secrets.APPLE_DEV_ACCOUNT }}" --team-id "${{ secrets.TEAM_ID }}" --password "${{ secrets.APP_PWD }}" --wait
-          xcrun stapler staple OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-
-          # Notarize profile validator DMG if it exists
-          if [ -f "OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg" ]; then
-            xcrun notarytool submit "OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg" --apple-id "${{ secrets.APPLE_DEV_ACCOUNT }}" --team-id "${{ secrets.TEAM_ID }}" --password "${{ secrets.APP_PWD }}" --wait
-            xcrun stapler staple OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-          fi
-
-      - name: Create DMG without notary
-        if: github.ref != 'refs/heads/main' && runner.os == 'macOS' && inputs.macos-combine-only
-        working-directory: ${{ github.workspace }}
-        run: |
-          mkdir -p ${{ github.workspace }}/build/universal/OrcaSlicer_dmg
-          rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/*
-          cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer.app ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/
-          ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/Applications
-          hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_dmg -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          
-          # Create separate OrcaSlicer_profile_validator DMG if the app exists
-          if [ -f "${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ]; then
-            mkdir -p ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg
-            rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/*
-            cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/
-            ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/Applications
-            hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-          fi
-
-      - name: Upload artifacts mac
-        if: runner.os == 'macOS' && inputs.macos-combine-only
-        uses: actions/upload-artifact@v7
-        with:
-          name: OrcaSlicer_Mac_universal_${{ env.ver }}
-          path: ${{ github.workspace }}/OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-
-      - name: Upload OrcaSlicer_profile_validator DMG mac
-        if: runner.os == 'macOS' && inputs.macos-combine-only && !vars.SELF_HOSTED
-        uses: actions/upload-artifact@v7
-        with:
-          name: OrcaSlicer_profile_validator_Mac_universal_DMG_${{ env.ver }}
-          path: ${{ github.workspace }}/OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-          if-no-files-found: ignore
-
-      - name: Deploy Mac release
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'macOS' && inputs.macos-combine-only && !vars.SELF_HOSTED
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          asset_name: OrcaSlicer_Mac_universal_nightly.dmg
-          asset_content_type: application/octet-stream
-          max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
-
-      - name: Deploy Mac OrcaSlicer_profile_validator DMG release
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'macOS' && inputs.macos-combine-only && !vars.SELF_HOSTED
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-          asset_name: OrcaSlicer_profile_validator_Mac_universal_nightly.dmg
-          asset_content_type: application/octet-stream
-          max_releases: 1
-
-# Windows
-      - name: setup MSVC
-        if: runner.os == 'Windows'
-        uses: microsoft/setup-msbuild@v3
-
-      - name: Install nsis
-        if: runner.os == 'Windows' && !vars.SELF_HOSTED
-        run: |
-          dir "C:/Program Files (x86)/Windows Kits/10/Include"
-          choco install nsis
-
-      - name: Build slicer Win
-        if: runner.os == 'Windows'
-        working-directory: ${{ github.workspace }}
-        # Orca: Removed Netfabb STL fixing service support in favor of CGAL.
-        # env:
-        #   WindowsSdkDir: 'C:\Program Files (x86)\Windows Kits\10\'
-        #   WindowsSDKVersion: '10.0.26100.0\'
-        run: .\build_release_vs.bat slicer
-
-      - name: Create installer Win
-        if: runner.os == 'Windows' && !vars.SELF_HOSTED
-        working-directory: ${{ github.workspace }}/build
-        run: |
-          cpack -G NSIS
-
-      - name: Pack app
-        if: runner.os == 'Windows'
-        working-directory: ${{ github.workspace }}/build
-        shell: cmd
-        run: '"C:/Program Files/7-Zip/7z.exe" a -tzip OrcaSlicer_Windows_${{ env.ver }}_portable.zip ${{ github.workspace }}/build/OrcaSlicer'
-
-      - name: Pack PDB
-        if: runner.os == 'Windows' && !vars.SELF_HOSTED
-        working-directory: ${{ github.workspace }}/build/src/Release
-        shell: cmd
-        run: '"C:/Program Files/7-Zip/7z.exe" a -m0=lzma2 -mx9 Debug_PDB_${{ env.ver }}_for_developers_only.7z  *.pdb'
-
-      - name: Upload artifacts Win zip
-        if: runner.os == 'Windows'
-        uses: actions/upload-artifact@v7
-        with:
-          name: OrcaSlicer_Windows_${{ env.ver }}_portable
-          path: ${{ github.workspace }}/build/OrcaSlicer
-
-      - name: Upload artifacts Win installer
-        if: runner.os == 'Windows' && !vars.SELF_HOSTED
-        uses: actions/upload-artifact@v7
-        with:
-          name: OrcaSlicer_Windows_${{ env.ver }}
-          path: ${{ github.workspace }}/build/OrcaSlicer*.exe
-
-      - name: Upload artifacts Win PDB
-        if: runner.os == 'Windows' && !vars.SELF_HOSTED
-        uses: actions/upload-artifact@v7
-        with:
-          name: PDB
-          path: ${{ github.workspace }}/build/src/Release/Debug_PDB_${{ env.ver }}_for_developers_only.7z
-
-      - name: Upload OrcaSlicer_profile_validator Win
-        if: runner.os == 'Windows' && !vars.SELF_HOSTED
-        uses: actions/upload-artifact@v7
-        with:
-          name: OrcaSlicer_profile_validator_Windows_${{ env.ver }}
-          path: ${{ github.workspace }}/build/src/Release/OrcaSlicer_profile_validator.exe
-
-      - name: Deploy Windows release portable
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'Windows' && !vars.SELF_HOSTED
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_${{ env.ver }}_portable.zip
-          asset_name: OrcaSlicer_Windows_nightly_portable.zip
-          asset_content_type: application/x-zip-compressed
-          max_releases: 1
-
-      - name: Deploy Windows release installer
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'Windows' && !vars.SELF_HOSTED
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
-          asset_name: OrcaSlicer_Windows_Installer_nightly.exe
-          asset_content_type: application/x-msdownload
-          max_releases: 1
-
-      - name: Deploy Windows OrcaSlicer_profile_validator release
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'Windows' && !vars.SELF_HOSTED
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/build/src/Release/OrcaSlicer_profile_validator.exe
-          asset_name: OrcaSlicer_profile_validator_Windows_nightly.exe
-          asset_content_type: application/x-msdownload
-          max_releases: 1
-
-# Ubuntu
-      - name: Apt-Install Dependencies
-        if: runner.os == 'Linux' && !vars.SELF_HOSTED
-        uses: ./.github/actions/apt-install-deps
-
-        # Tests must built at the same time as the slicer;
-        # if you untangle them feel free to separate them here too
-      - name: Build slicer and tests
-        if: runner.os == 'Linux'
-        shell: bash
-        run: |
-          ./build_linux.sh -istrlL
-          ./scripts/check_appimage_libs.sh ./build/package ./build/package/bin/orca-slicer
-          mv -n ./build/OrcaSlicer_Linux_V${{ env.ver_pure }}.AppImage ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          chmod +x ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          tar -cvpf build_tests.tar build/tests
-
-        # Use tar because upload-artifacts won't always preserve directory structure
-        # and doesn't preserve file permissions
-      - name: Upload Test Artifact
-        if: runner.os == 'Linux'
-        uses: actions/upload-artifact@v7
-        with:
-          name: ${{ github.sha }}-tests
-          overwrite: true
-          path: build_tests.tar
-          retention-days: 5
-          if-no-files-found: error
-
-      - name: Run external slicer regression tests
-        if: runner.os == 'Linux'
-        timeout-minutes: 20
-        shell: bash
-        run: |
-          test_repo_dir="${{ runner.temp }}/orca-test-repo"
-          rm -rf "$test_repo_dir"
-          git clone --depth 1 https://github.com/OrcaSlicer/orca-test-repo.git "$test_repo_dir"
-          python3 "$test_repo_dir/run_test.py" "${{ github.workspace }}/build/package/bin/orca-slicer"
-
-      - name: Build orca_custom_preset_tests
-        if: github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED
-        working-directory: ${{ github.workspace }}/build/src/Release
-        shell: bash
-        run: |
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -g 1
-          cd ${{ github.workspace }}/resources/profiles
-          zip -r orca_custom_preset_tests.zip user/
-
-      - name: Upload artifacts Ubuntu
-        if: ${{ ! env.ACT && runner.os == 'Linux' }}
-        uses: actions/upload-artifact@v7
-        with:
-          name: OrcaSlicer_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
-          path: './build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage'
-
-      - name: Upload OrcaSlicer_profile_validator Ubuntu
-        if: ${{ ! env.ACT && runner.os == 'Linux' && !vars.SELF_HOSTED }}
-        uses: actions/upload-artifact@v7
-        with:
-          name: OrcaSlicer_profile_validator_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
-          path: './build/src/Release/OrcaSlicer_profile_validator'
-
-      - name: Deploy Ubuntu release
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          asset_name: OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_nightly.AppImage
-          asset_content_type: application/octet-stream
-          max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
-      - name: Deploy Ubuntu release
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
-        uses: rickstaa/action-create-tag@v1
-        with:
-          tag: "nightly-builds"
-          tag_exists_error: false
-          force_push_tag: true
-          message: "nightly-builds"
-
-      - name: Deploy Ubuntu OrcaSlicer_profile_validator release
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ./build/src/Release/OrcaSlicer_profile_validator
-          asset_name: OrcaSlicer_profile_validator_Linux${{ env.ubuntu-ver-str }}_nightly
-          asset_content_type: application/octet-stream
-          max_releases: 1
-
-      - name: Deploy orca_custom_preset_tests
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/resources/profiles/orca_custom_preset_tests.zip
-          asset_name: orca_custom_preset_tests.zip
-          asset_content_type: application/octet-stream
-          max_releases: 1

.github/workflows/check_locale.yml

@@ -1,44 +0,0 @@
-name: Check locale
-
-on: 
-    pull_request:
-      branches: 
-       - main 
-      paths:
-       - 'localization/**'
-       - ".github/workflows/check_locale.yml"
-
-jobs:
-  check_translation:
-    name: Check translation
-    runs-on: ubuntu-latest
-    steps:  
-      - name: Checkout repository
-        uses: actions/checkout@v6
-
-      - name: Install gettext 
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y gettext
-
-      # don't call ./run_gentext.sh as most translators never sync with main branch...
-      - name: Check translation format
-        run: |
-          echo $PWD
-          pot_file="./localization/i18n/OrcaSlicer.pot"
-          for dir in ./localization/i18n/*/
-          do
-              dir=${dir%*/}      # remove the trailing "/"
-              lang=${dir##*/}    # extract the language identifier
-          
-              if [ -f "$dir/OrcaSlicer_${lang}.po" ]; then
-                  mkdir -p ./resources/i18n/${lang}/
-                  msgfmt --check-format -o ./resources/i18n/${lang}/OrcaSlicer.mo $dir/OrcaSlicer_${lang}.po
-                  # Check the exit status of the msgfmt command
-                  if [ $? -ne 0 ]; then
-                      echo "Error encountered with msgfmt command for language ${lang}."
-                      exit 1  # Exit the script with an error status
-                  fi
-              fi
-          done
-        

.github/workflows/check_profiles.yml

@@ -1,122 +0,0 @@
-name: Check profiles
-on:
-  pull_request:
-    branches:
-    - main
-    paths:
-    - 'resources/profiles/**'
-    - ".github/workflows/check_profiles.yml"
-
-  workflow_dispatch:
-    inputs:
-      logLevel:
-        description: 'Log level'
-        required: true
-        default: 'warning'
-
-permissions:
-  contents: read
-
-
-jobs:
-  check_profiles:
-    name: Check profiles
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v6
-
-      - name: Run extra JSON check
-        id: extra_json_check
-        continue-on-error: true
-        run: |
-          set +e
-          python3 ./scripts/orca_extra_profile_check.py 2>&1 | tee ${{ runner.temp }}/extra_json_check.log
-          exit ${PIPESTATUS[0]}
-
-      # download
-      - name: Download
-        working-directory: ${{ github.workspace }}
-        run: |
-          curl -LJO https://github.com/SoftFever/Orca_tools/releases/download/1/OrcaSlicer_profile_validator
-          chmod +x ./OrcaSlicer_profile_validator
-
-      # validate profiles
-      - name: validate system profiles
-        id: validate_system
-        continue-on-error: true
-        run: |
-          set +e
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_system.log
-          exit ${PIPESTATUS[0]}
-
-      - name: validate custom presets
-        id: validate_custom
-        continue-on-error: true
-        working-directory: ${{ github.workspace }}
-        run: |
-          set +e
-          curl -LJO https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
-          unzip -q ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_custom.log
-          exit ${PIPESTATUS[0]}
-
-      - name: Prepare PR number for comment workflow
-        if: ${{ always() && github.event_name == 'pull_request' }}
-        run: |
-          mkdir -p ${{ runner.temp }}/profile-check-results
-          echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
-
-      - name: Prepare comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
-        run: |
-          {
-            # Marker matched by check_profiles_comment.yml to delete prior comments.
-            echo "<!-- profile-validation-comment -->"
-            echo "## :x: Profile Validation Errors"
-            echo ""
-
-            if [ "${{ steps.extra_json_check.outcome }}" = "failure" ]; then
-              echo "### Extra JSON Check Failed"
-              echo ""
-              echo '```'
-              head -c 30000 ${{ runner.temp }}/extra_json_check.log || echo "No output captured"
-              echo '```'
-              echo ""
-            fi
-
-            if [ "${{ steps.validate_system.outcome }}" = "failure" ]; then
-              echo "### System Profile Validation Failed"
-              echo ""
-              echo '```'
-              head -c 30000 ${{ runner.temp }}/validate_system.log || echo "No output captured"
-              echo '```'
-              echo ""
-            fi
-
-            if [ "${{ steps.validate_custom.outcome }}" = "failure" ]; then
-              echo "### Custom Preset Validation Failed"
-              echo ""
-              echo '```'
-              head -c 30000 ${{ runner.temp }}/validate_custom.log || echo "No output captured"
-              echo '```'
-              echo ""
-            fi
-
-            echo "---"
-            echo "*Please fix the above errors and push a new commit.*"
-          } > ${{ runner.temp }}/profile-check-results/pr_comment.md
-
-      - name: Upload comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' }}
-        uses: actions/upload-artifact@v7
-        with:
-          name: profile-check-results
-          path: ${{ runner.temp }}/profile-check-results/
-          retention-days: 1
-
-      - name: Fail if any check failed
-        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
-        run: |
-          echo "One or more profile checks failed. See above for details."
-          exit 1

.github/workflows/check_profiles_comment.yml

@@ -1,66 +0,0 @@
-name: Post profile check comment
-
-# NOTE: The workflow name in the 'workflows' filter below must match the 'name'
-# field in check_profiles.yml exactly. If that name changes, update it here too.
-on:
-  workflow_run:
-    workflows: ["Check profiles"]
-    types:
-      - completed
-
-permissions:
-  pull-requests: write
-  # Needed to delete outdated bot comments via the issues/comments endpoint.
-  issues: write
-
-# Serialize handlers per source branch so parallel runs don't race delete-and-post.
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.workflow_run.head_repository.full_name }}-${{ github.event.workflow_run.head_branch }}
-  cancel-in-progress: false
-
-jobs:
-  post_comment:
-    name: Post PR comment
-    runs-on: ubuntu-24.04
-    if: ${{ github.event.workflow_run.event == 'pull_request' && (github.event.workflow_run.conclusion == 'success' || github.event.workflow_run.conclusion == 'failure') }}
-    steps:
-      - name: Download artifact
-        id: download
-        uses: actions/download-artifact@v8
-        continue-on-error: true
-        with:
-          name: profile-check-results
-          run-id: ${{ github.event.workflow_run.id }}
-          github-token: ${{ github.token }}
-
-      - name: Update PR comment
-        if: ${{ steps.download.outcome == 'success' }}
-        env:
-          GH_TOKEN: ${{ github.token }}
-          GH_REPO: ${{ github.repository }}
-        run: |
-          if [ ! -f pr_number.txt ]; then
-            echo "No pr_number.txt in artifact, skipping."
-            exit 0
-          fi
-
-          PR_NUMBER=$(cat pr_number.txt)
-          if ! [[ "$PR_NUMBER" =~ ^[0-9]+$ ]]; then
-            echo "Invalid PR number: $PR_NUMBER"
-            exit 1
-          fi
-
-          # Delete prior comments matching the marker (from check_profiles.yml) or the legacy heading.
-          OLD_IDS=$(gh api --paginate "repos/${GH_REPO}/issues/${PR_NUMBER}/comments" \
-            --jq '.[] | select(.user.login == "github-actions[bot]") | select((.body | startswith("<!-- profile-validation-comment -->")) or (.body | startswith("## :x: Profile Validation Errors"))) | .id')
-          for comment_id in $OLD_IDS; do
-            echo "Deleting outdated profile-validation comment ${comment_id}"
-            gh api -X DELETE "repos/${GH_REPO}/issues/comments/${comment_id}" || true
-          done
-
-          # Post a new comment only when validation failed (pr_comment.md present).
-          if [ -f pr_comment.md ]; then
-            gh pr comment "$PR_NUMBER" --body-file pr_comment.md
-          else
-            echo "Validation succeeded; cleaned up prior comments without posting."
-          fi

.github/workflows/dedupe-issues.yml

@@ -1,81 +0,0 @@
-name: Orca Issue Dedupe
-description: Automatically dedupe GitHub issues using AI
-on:
-  issues:
-    types: [opened]
-  workflow_dispatch:
-    inputs:
-      issue_number:
-        description: 'Issue number to process for duplicate detection'
-        required: true
-        type: string
-
-jobs:
-  dedupe-issues:
-    runs-on: ubuntu-latest
-    timeout-minutes: 30
-    permissions:
-      contents: read
-      issues: write
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v6
-
-      - name: Run Claude Code slash command
-        uses: anthropics/claude-code-base-action@beta
-        with:
-          prompt: "/dedupe ${{ github.repository }}/issues/${{ github.event.issue.number || inputs.issue_number }}"
-          claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
-          claude_args: "--model claude-sonnet-4-5-20250929"
-          claude_env: |
-            GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Log duplicate comment event to Statsig
-        if: always()
-        env:
-          STATSIG_API_KEY: ${{ secrets.STATSIG_API_KEY }}
-        run: |
-          ISSUE_NUMBER=${{ github.event.issue.number || inputs.issue_number }}
-          REPO=${{ github.repository }}
-          
-          if [ -z "$STATSIG_API_KEY" ]; then
-            echo "STATSIG_API_KEY not found, skipping Statsig logging"
-            exit 0
-          fi
-          
-          # Prepare the event payload
-          EVENT_PAYLOAD=$(jq -n \
-            --arg issue_number "$ISSUE_NUMBER" \
-            --arg repo "$REPO" \
-            --arg triggered_by "${{ github.event_name }}" \
-            '{
-              events: [{
-                eventName: "github_duplicate_comment_added",
-                value: 1,
-                metadata: {
-                  repository: $repo,
-                  issue_number: ($issue_number | tonumber),
-                  triggered_by: $triggered_by,
-                  workflow_run_id: "${{ github.run_id }}"
-                },
-                time: (now | floor | tostring)
-              }]
-            }')
-          
-          # Send to Statsig API
-          echo "Logging duplicate comment event to Statsig for issue #${ISSUE_NUMBER}"
-          
-          RESPONSE=$(curl -s -w "\n%{http_code}" -X POST https://events.statsigapi.net/v1/log_event \
-            -H "Content-Type: application/json" \
-            -H "STATSIG-API-KEY: ${STATSIG_API_KEY}" \
-            -d "$EVENT_PAYLOAD")
-          
-          HTTP_CODE=$(echo "$RESPONSE" | tail -n1)
-          BODY=$(echo "$RESPONSE" | head -n-1)
-          
-          if [ "$HTTP_CODE" -eq 200 ] || [ "$HTTP_CODE" -eq 202 ]; then
-            echo "Successfully logged duplicate comment event for issue #${ISSUE_NUMBER}"
-          else
-            echo "Failed to log duplicate comment event for issue #${ISSUE_NUMBER}. HTTP ${HTTP_CODE}: ${BODY}"
-          fi

.github/workflows/doxygen-docs.yml

@@ -1,78 +0,0 @@
-name: Generate Doxygen Documentation
-
-on:
-  schedule:
-    - cron: '0 0 * * 1'  # Every Monday at midnight UTC
-  workflow_dispatch:      # Manual trigger
-
-concurrency:
-  group: ${{ github.workflow }}
-  cancel-in-progress: true
-
-jobs:
-  build-and-deploy:
-    name: Build and Deploy Docs
-    runs-on: ubuntu-latest
-    timeout-minutes: 60
-    # Only run on main branch of the main repository
-    if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main'
-    permissions:
-      contents: read
-    steps:
-      - uses: thejerrybao/setup-swap-space@v1
-        with:
-          swap-space-path: /swapfile
-          swap-size-gb: 8
-          remove-existing-swap-files: true
-
-      - name: Checkout repository
-        uses: actions/checkout@v6
-
-      - name: Install Doxygen and Graphviz
-        run: |
-          set -euo pipefail
-          sudo apt-get update
-          sudo apt-get install -y doxygen graphviz
-
-      - name: Generate documentation
-        run: |
-          set -euo pipefail
-          # Override DOT_NUM_THREADS to avoid parallel dot race condition bug
-          sed -i 's/^DOT_NUM_THREADS.*/DOT_NUM_THREADS = 1/' .doxygen
-          doxygen .doxygen
-          # Verify documentation was generated
-          if [ ! -f "internal_docs/index.html" ]; then
-            echo "Error: Documentation generation failed - index.html not found"
-            exit 1
-          fi
-      - name: Install Rclone
-        run: |
-          set -euo pipefail
-          sudo -v
-          curl -fsSL https://rclone.org/install.sh | sudo bash
-
-      - name: optimize
-        run: |
-          set -euo pipefail
-          rm -f internal_docs/Nodes.xml internal_docs/Tokens.xml
-          find internal_docs -name "*.map" -type f -delete || true
-          find internal_docs -name "*.md5" -type f -delete || true
-
-      - name: upload
-        # We configure rclone dynamically using environment variables
-        run: |
-          set -euo pipefail
-          # Remove existing config if it exists to avoid conflicts
-          rclone config delete cloudflare 2>/dev/null || true
-          rclone config create cloudflare s3 \
-          provider Cloudflare \
-          access_key_id ${{ secrets.R2_ACCESS_KEY_ID }} \
-          secret_access_key ${{ secrets.R2_SECRET_ACCESS_KEY }} \
-          endpoint ${{ secrets.R2_ENDPOINT }}
-
-          rclone sync internal_docs/ cloudflare:orcaslicer-internals \
-          --progress \
-          --transfers 512 \
-          --checkers 512 
-          
-          echo "Documentation upload completed successfully"

.github/workflows/pr-label-bot.yml

@@ -1,275 +0,0 @@
-name: PR Label Bot
-
-on:
-  pull_request_target:
-    types:
-      - opened
-      - reopened
-  issue_comment:
-    types:
-      - created
-
-permissions:
-  contents: read
-  pull-requests: write
-  issues: write
-
-jobs:
-  request-label:
-    if: github.event_name == 'pull_request_target' && github.event.pull_request.author_association != 'COLLABORATOR' && github.event.pull_request.author_association != 'OWNER' && github.event.pull_request.author_association != 'MEMBER'
-    permissions:
-      contents: read
-      pull-requests: write
-      issues: write
-    runs-on: ubuntu-latest
-    steps:
-      - name: Ask PR author for label
-        uses: actions/github-script@v7
-        with:
-          script: |
-            function isPermissionDenied(error) {
-              return error && error.status === 403 && /Resource not accessible by integration/i.test(error.message || '');
-            }
-
-            const allowedLabels = [
-              'bug-fix',
-              'enhancement',
-              'Localization',
-              'profile',
-              'QoL',
-              'UI/UX',
-              'dependencies'
-            ];
-            const pr = context.payload.pull_request;
-            const labelsList = `${allowedLabels
-              .slice(0, -1)
-              .map((label) => `\`${label}\``)
-              .join(', ')} and \`${allowedLabels[allowedLabels.length - 1]}\`.`;
-            const examplesText = [
-              '```',
-              '/bot add-label bug-fix',
-              '```',
-              '```',
-              '/bot add-label bug-fix, UI/UX',
-              '```',
-              '```',
-              '/bot remove-label bug-fix, UI/UX',
-              '```'
-            ].join('\n');
-
-            try {
-              await github.rest.issues.createComment({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                issue_number: pr.number,
-                body:
-                  `Hi @${pr.user.login}, you can manage the labels for this PR by \`/bot add-label\` and \`/bot remove-label\`\n\n` +
-                  `Allowed labels are:\n${labelsList}\n\n` +
-                  `Examples:\n${examplesText}`
-              });
-            } catch (error) {
-              if (isPermissionDenied(error)) {
-                core.warning(
-                  'Skipping PR comment because token cannot write. Enable Actions write permissions, ' +
-                  'or run with a token that has issues:write and pull_requests:write.'
-                );
-                return;
-              }
-
-              throw error;
-            }
-
-  apply-label:
-    if: github.event_name == 'issue_comment'
-    permissions:
-      contents: read
-      pull-requests: write
-      issues: write
-    runs-on: ubuntu-latest
-    steps:
-      - name: Apply label command from PR author
-        uses: actions/github-script@v7
-        with:
-          script: |
-            function isPermissionDenied(error) {
-              return error && error.status === 403 && /Resource not accessible by integration/i.test(error.message || '');
-            }
-
-            const allowedLabels = [
-              'bug-fix',
-              'enhancement',
-              'Localization',
-              'profile',
-              'QoL',
-              'UI/UX',
-              'dependencies'
-            ];
-
-            const issue = context.payload.issue;
-            if (!issue.pull_request) {
-              core.info('Ignoring comment that is not on a pull request.');
-              return;
-            }
-
-            const body = (context.payload.comment.body || '').trim();
-            const commandLine = body
-              .split('\n')
-              .map((line) => line.trim())
-              .find((line) => /^\/bot\s+(add-label|remove-label)(?:\s*:\s*|\s+)/i.test(line));
-
-            if (!commandLine) {
-              core.info('No /bot add-label or /bot remove-label command found.');
-              return;
-            }
-
-            const commandMatch = commandLine.match(/^\/bot\s+(add-label|remove-label)(?:\s*:\s*|\s+)(.+)\s*$/i);
-            if (!commandMatch) {
-              core.info('Label command format is invalid.');
-              return;
-            }
-
-            const action = commandMatch[1].toLowerCase() === 'add-label' ? 'add' : 'remove';
-            let labelsExpr = (commandMatch[2] || '').trim();
-            if (!labelsExpr) {
-              core.info('Label command is missing label name.');
-              return;
-            }
-
-            if (labelsExpr.startsWith('[') && labelsExpr.endsWith(']')) {
-              labelsExpr = labelsExpr.slice(1, -1).trim();
-            }
-
-            const requestedRawLabels = labelsExpr
-              .split(',')
-              .map((part) => part.trim())
-              .filter(Boolean);
-
-            if (!requestedRawLabels.length) {
-              core.info('No labels were provided in the command.');
-              return;
-            }
-
-            const { data: pr } = await github.rest.pulls.get({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              pull_number: issue.number
-            });
-
-            const commenter = context.payload.comment.user.login;
-            if (commenter !== pr.user.login) {
-              core.info('Ignoring command because commenter is not the PR author.');
-              return;
-            }
-
-            const labelsByLower = new Map(
-              allowedLabels.map((label) => [label.toLowerCase(), label])
-            );
-
-            const resolvedLabels = [];
-            const invalidLabels = [];
-
-            for (const rawLabel of requestedRawLabels) {
-              const resolved = labelsByLower.get(rawLabel.toLowerCase());
-              if (resolved) {
-                resolvedLabels.push(resolved);
-              } else {
-                invalidLabels.push(rawLabel);
-              }
-            }
-            const uniqueRequestedLabels = [...new Set(resolvedLabels)];
-
-            if (action === 'add' && uniqueRequestedLabels.length) {
-              try {
-                await github.rest.issues.addLabels({
-                  owner: context.repo.owner,
-                  repo: context.repo.repo,
-                  issue_number: issue.number,
-                  labels: uniqueRequestedLabels
-                });
-              } catch (error) {
-                if (isPermissionDenied(error)) {
-                  core.warning(
-                    'Cannot add labels because token cannot write. Enable Actions write permissions, ' +
-                    'or run with a token that has issues:write and pull_requests:write.'
-                  );
-                  return;
-                }
-
-                throw error;
-              }
-
-              core.info(`Added labels: ${uniqueRequestedLabels.join(', ')}`);
-            }
-
-            if (action === 'remove' && uniqueRequestedLabels.length) {
-              let removedCount = 0;
-              try {
-                for (const label of uniqueRequestedLabels) {
-                  try {
-                    await github.rest.issues.removeLabel({
-                      owner: context.repo.owner,
-                      repo: context.repo.repo,
-                      issue_number: issue.number,
-                      name: label
-                    });
-                    removedCount += 1;
-                  } catch (error) {
-                    if (isPermissionDenied(error)) {
-                      core.warning(
-                        'Cannot remove labels because token cannot write. Enable Actions write permissions, ' +
-                        'or run with a token that has issues:write and pull_requests:write.'
-                      );
-                      return;
-                    }
-
-                    if (error.status === 404) {
-                      core.info(`Label is not currently applied: ${label}`);
-                      continue;
-                    }
-
-                    throw error;
-                  }
-                }
-
-                core.info(`Removed labels count: ${removedCount}`);
-              } catch (error) {
-                throw error;
-              }
-            }
-
-            if (!uniqueRequestedLabels.length) {
-              core.info('No valid labels were provided in the command.');
-            }
-
-            if (invalidLabels.length) {
-              const allowedText = allowedLabels.map((label) => `\`${label}\``).join(', ');
-              const invalidText = invalidLabels.map((label) => `\`${label}\``).join(', ');
-              const validText = uniqueRequestedLabels.length
-                ? `\n\nProcessed valid label(s): ${uniqueRequestedLabels.map((label) => `\`${label}\``).join(', ')}`
-                : '';
-
-              try {
-                await github.rest.issues.createComment({
-                  owner: context.repo.owner,
-                  repo: context.repo.repo,
-                  issue_number: issue.number,
-                  body:
-                    `@${commenter} invalid label(s): ${invalidText}.${validText}\n\n` +
-                    `Allowed labels: ${allowedText}\n\n` +
-                    `Use:\n` +
-                    `- \`/bot add-label label\`\n` +
-                    `- \`/bot remove-label label\`\n` +
-                    `- \`/bot add-label label1, label2\``
-                });
-              } catch (error) {
-                if (isPermissionDenied(error)) {
-                  core.warning('Cannot post invalid-label feedback because token cannot write comments.');
-                  return;
-                }
-
-                throw error;
-              }
-            }
-
-            const processedLabelsText = uniqueRequestedLabels.length ? uniqueRequestedLabels.join(', ') : '(none)';
-            core.info(`Processed label command: ${action} ${processedLabelsText}`);

.github/workflows/publish_release.yml

@@ -1,127 +0,0 @@
-name: Publish to draft release
-
-# Manually pulls the platform binaries produced by a "Build all" run and uploads
-# them to an existing DRAFT release. Decoupled from the build so you can test a
-# build first, then publish exactly that run's artifacts once you're happy.
-#
-# Trigger: Actions tab -> "Publish to draft release" -> Run workflow.
-# Locked to a single person: the first step aborts unless the actor matches the
-# `RELEASE_PUBLISHER` repo variable (set to "SoftFever"). To allow someone else,
-# change that variable: gh variable set RELEASE_PUBLISHER --body "<login>".
-
-on:
-  workflow_dispatch:
-    inputs:
-      run_id:
-        description: 'Run ID of the "Build all" workflow to pull binaries from (the number in the Actions run URL)'
-        required: true
-        type: string
-      tag:
-        description: 'Tag of the draft release to upload to (e.g. v2.4.0-beta)'
-        required: true
-        type: string
-
-permissions:
-  contents: write   # upload release assets
-  actions: read     # download artifacts from another run
-
-jobs:
-  publish:
-    name: Publish binaries to draft release
-    runs-on: ubuntu-latest
-    env:
-      GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      RUN_ID: ${{ inputs.run_id }}
-      TAG: ${{ inputs.tag }}
-    steps:
-      - name: Restrict to the release publisher
-        env:
-          PUBLISHER: ${{ vars.RELEASE_PUBLISHER }}
-        run: |
-          if [ -z "$PUBLISHER" ]; then
-            echo "::error::RELEASE_PUBLISHER repo variable is not set."
-            exit 1
-          fi
-          if [ "${{ github.actor }}" != "$PUBLISHER" ]; then
-            echo "::error::Only @$PUBLISHER may run this workflow (you are @${{ github.actor }})."
-            exit 1
-          fi
-          echo "Authorized: @${{ github.actor }}"
-
-      - name: Verify target is a draft release
-        run: |
-          if ! gh release view "$TAG" --repo "$GITHUB_REPOSITORY" --json isDraft >/dev/null 2>&1; then
-            echo "::error::Release '$TAG' not found. Create the draft (with this tag) first."
-            exit 1
-          fi
-          is_draft=$(gh release view "$TAG" --repo "$GITHUB_REPOSITORY" --json isDraft --jq '.isDraft')
-          if [ "$is_draft" != "true" ]; then
-            echo "::error::Release '$TAG' is published, not a draft. Aborting to avoid touching a live release."
-            exit 1
-          fi
-
-      - name: Verify source build run
-        run: |
-          info=$(gh run view "$RUN_ID" --repo "$GITHUB_REPOSITORY" --json workflowName,conclusion,headBranch)
-          name=$(echo "$info" | jq -r '.workflowName')
-          conclusion=$(echo "$info" | jq -r '.conclusion')
-          branch=$(echo "$info" | jq -r '.headBranch')
-          echo "Source run #$RUN_ID: '$name' on '$branch' (conclusion: $conclusion)"
-          if [ "$conclusion" != "success" ]; then
-            echo "::warning::Source run did not conclude 'success' ($conclusion). Some assets may be missing."
-          fi
-
-      - name: Download release artifacts from build run
-        run: |
-          gh run download "$RUN_ID" --repo "$GITHUB_REPOSITORY" --dir artifacts \
-            -p 'OrcaSlicer_Windows_*' \
-            -p 'OrcaSlicer_Mac_universal_*' \
-            -p 'OrcaSlicer_Linux_ubuntu_*' \
-            -p 'OrcaSlicer-Linux-flatpak_*' \
-            -p 'PDB'
-          echo "Downloaded artifact folders:"
-          ls -1 artifacts
-
-      - name: Assemble release assets
-        run: |
-          set -euo pipefail
-          mkdir -p upload
-
-          # gh run download auto-extracts each artifact into a folder, so the inner
-          # binaries are already unzipped. Copy the inner binary for each platform.
-          # -type f is required (some artifact *folders* are named "*.flatpak").
-
-          # Windows installer: the .exe inside the installer artifact, NOT the
-          # orca-slicer.exe that lives in the portable app folder.
-          find artifacts -type f -name '*.exe' -path '*OrcaSlicer_Windows_*' ! -path '*_portable*' -exec cp -v {} upload/ \;
-          # macOS universal DMG (profile-validator DMG isn't downloaded).
-          find artifacts -type f -name '*.dmg' -path '*OrcaSlicer_Mac_universal_*' -exec cp -v {} upload/ \;
-          # Linux AppImage.
-          find artifacts -type f -name '*.AppImage' -exec cp -v {} upload/ \;
-          # Flatpak bundles (x86_64 + aarch64).
-          find artifacts -type f -name '*.flatpak' -exec cp -v {} upload/ \;
-          # Windows debug symbols (PDB archive, for developers).
-          find artifacts -type f -name 'Debug_PDB_*.7z' -exec cp -v {} upload/ \;
-
-          # Portable Windows build is an unzipped folder artifact; re-zip it to the
-          # released filename (this one stays a .zip on the release).
-          portable_dir=$(find artifacts -maxdepth 1 -type d -name 'OrcaSlicer_Windows_*_portable' | head -n1)
-          if [ -n "${portable_dir:-}" ]; then
-            ( cd "$portable_dir" && zip -qr "$GITHUB_WORKSPACE/upload/$(basename "$portable_dir").zip" . )
-            echo "Zipped portable -> $(basename "$portable_dir").zip"
-          else
-            echo "::warning::Windows portable artifact not found."
-          fi
-
-          echo "Assets to upload:"
-          ls -lh upload
-          if [ -z "$(ls -A upload)" ]; then
-            echo "::error::No assets assembled. Check the run_id and that its artifacts haven't expired."
-            exit 1
-          fi
-
-      - name: Upload assets to draft release
-        run: |
-          gh release upload "$TAG" upload/* --repo "$GITHUB_REPOSITORY" --clobber
-          echo "Uploaded to draft release: $TAG"
-          gh release view "$TAG" --repo "$GITHUB_REPOSITORY" --json assets --jq '.assets[].name'

.github/workflows/shellcheck.yml

@@ -1,44 +0,0 @@
-on:
-  push:
-    paths:
-      - '**.sh'
-      - 'scripts/linux.d/*'
-  pull_request:
-    paths:
-      - '**.sh'
-      - 'scripts/linux.d/*'
-  schedule:
-      - cron: '55 7 * * *' # run once a day near midnight US Pacific time
-  workflow_dispatch: # allows for manual dispatch
-
-name: "Shellcheck"
-permissions: {}
-
-jobs:
-  shellcheck:
-    name: Shellcheck
-    runs-on: ubuntu-latest
-    steps:
-      - name: Cache shellcheck download
-        id: cache-shellcheck-v0_11
-        uses: actions/cache@v5
-        with:
-          path: ~/shellcheck
-          key: ${{ runner.os }}-shellcheck-v0_11
-
-      - name: Download shellcheck
-        if: steps.cache-shellcheck-v0_11.outputs.cache-hit != 'true'
-        shell: bash
-        env:
-          INPUT_VERSION: "v0.11.0"
-        run: |
-          curl -L#o ~/sc.tar.xz "https://github.com/koalaman/shellcheck/releases/download/${INPUT_VERSION}/shellcheck-${INPUT_VERSION}.linux.x86_64.tar.xz"
-          tar -xvf ~/sc.tar.xz -C ~
-          mv ~/shellcheck-"${INPUT_VERSION}"/shellcheck ~/shellcheck
-
-      - uses: actions/checkout@v6
-        with:
-          fetch-depth: 1
-
-      - name: Shellcheck scripts
-        run: 'find . -not -name \*.md \( -path ./scripts/linux.d/\* -o -name \*.sh \) -print0 | xargs -0 ~/shellcheck'

.github/workflows/update-translation.yml

@@ -1,38 +0,0 @@
-name: Update Translation Catalog
-on: 
-  # schedule:
-  #   - cron: 0 0 * * 1
-  workflow_dispatch:
-
-jobs:
-  update_translation:
-    name: Update translation
-    runs-on: ubuntu-latest
-    steps:  
-      - name: Checkout repository
-        uses: actions/checkout@v6
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: '3.12'
-
-      - name: Install gettext
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y gettext
-
-      - name: Update translation catalog
-        run: |
-          ./scripts/run_gettext.sh --full
-          git add localization/i18n/*
-
-      - name: Commit translation catalog updates
-        uses: qoomon/actions--create-commit@v1
-        id: commit
-        with:
-          message: Update translation catalog
-          skip-empty: true
-
-      - name: Push changes
-        run: git push

.github/workflows/winget_updater.yml

@@ -1,14 +0,0 @@
-name: Publish to WinGet
-on:
-  release:
-    types: [ released ]
-jobs:
-  publish:
-    runs-on: windows-latest
-    steps:
-      - uses: vedantmgoyal9/winget-releaser@main
-        with:
-          identifier: SoftFever.OrcaSlicer
-          version: ${{ github.event.release.tag_name }}
-          token: ${{ secrets.WINGET_TOKEN }}
-          installers-regex: '\.exe$'

.gitignore

@@ -1,48 +1,13 @@
 Build
 Build.bat
-/build*/
-CMakeLists.txt.user
-**/CMakeLists.txt.autosave
-deps/build*
 MYMETA.json
 MYMETA.yml
 _build
 blib
 xs/buildtmp
 *.o
-*.log
 MANIFEST.bak
 xs/MANIFEST.bak
 xs/assertlib*
 .init_bundle.ini
-.vs/*
 local-lib
-/src/TAGS
-/.vscode/
-/.vscode
-build-linux/*
-deps/build*/*
-**/.DS_Store
-install_*
-build_*/
-SVG
-src/OrcaSlicer-doc/
-.idea/
-/.cache/
-*.mo
-**/process_full/
-**/machine_full/
-**/filament_full/
-/deps/DL_CACHE/
-/deps/DL_CACHE
-**/.flatpak-builder/
-*.no-debug.yml
-resources/profiles/user/default
-*.code-workspace
-deps_src/build/
-test.js
-/.cache/
-.clangd
-internal_docs/
-*.flatpak
-/flatpak-repo/

AGENTS.md

@@ -1,57 +0,0 @@
-# CLAUDE.md
-
-OrcaSlicer — open-source C++17 3D slicer. wxWidgets GUI, CMake build system.
-
-## Build Commands
-
-```bash
-# macOS
-cmake --build build/arm64 --config RelWithDebInfo --target all --
-
-# Linux
-cmake --build build --config RelWithDebInfo --target all --
-
-# Windows (replace %build_type% with Debug/Release/RelWithDebInfo)
-cmake --build . --config %build_type% --target ALL_BUILD -- -m
-```
-
-## Testing
-
-Catch2 framework. Tests in `tests/` directory.
-
-```bash
-cd build && ctest --output-on-failure           # all tests
-ctest --test-dir ./tests/libslic3r              # individual suite
-ctest --test-dir ./tests/fff_print
-```
-
-## Code Style
-
-- C++17, selective C++20. PascalCase classes, snake_case functions/variables
-- `#pragma once` for headers. Smart pointers and RAII preferred
-- Parallelization via TBB — be mindful of shared state
-
-## Key Entry Points
-
-- App startup: `src/OrcaSlicer.cpp`
-- Slicing pipeline: `src/libslic3r/Print.cpp`
-- All print/printer/material settings: `src/libslic3r/PrintConfig.cpp`
-- GUI: `src/slic3r/GUI/`
-- Core algorithms: `src/libslic3r/` (GCode/, Fill/, Support/, Geometry/, Format/, Arachne/)
-- Printer profiles: `resources/profiles/[manufacturer].json`
-
-## Critical Constraints
-
-- **Backward compatibility required** for .3mf project files and printer profiles
-- **Cross-platform** — all changes must work on Windows, macOS, and Linux
-- Profile/format changes need version migration handling
-- Dependencies built separately in `deps/build/`, then linked to main app
-
-## Code review focus areas
-
-- Changes must not cause regressions in existing functionality, defaults, profiles, or project compatibility.
-- Features gated by options must not affect existing behavior when those options are disabled.
-- Changes should follow the existing code style and architecture. Architectural changes should be justified in code comments and the PR description.
-- Add helper functions or utilities only when existing code cannot reasonably be reused. Avoid duplication.
-- Keep code concise and clear. Manually simplify AI generated bloated codes before review.
-- Include targeted tests or documented verification for behavior changes, especially in slicing logic, profiles, formats, and GUI defaults.

Build.PL

@@ -0,0 +1,150 @@
+#!/usr/bin/perl
+
+use strict;
+use warnings;
+
+use Config;
+use File::Spec;
+
+my %prereqs = qw(
+    Devel::CheckLib                 0
+    ExtUtils::MakeMaker             6.80
+    ExtUtils::ParseXS               3.22
+    ExtUtils::XSpp                  0
+    ExtUtils::Typemaps              0
+    ExtUtils::Typemaps::Basic       0
+    File::Basename                  0
+    File::Spec                      0
+    Getopt::Long                    0
+    Module::Build::WithXSpp         0.14
+    Moo                             1.003001
+    POSIX                           0
+    Scalar::Util                    0
+    Test::More                      0
+    Thread::Semaphore               0
+    IO::Scalar                      0
+    threads                         1.96
+    Time::HiRes                     0
+);
+my %recommends = qw(
+    Class::XSAccessor               0
+    Test::Harness                   0
+);
+
+my $sudo    = grep { $_ eq '--sudo' } @ARGV;
+my $gui     = grep { $_ eq '--gui' } @ARGV;
+my $nolocal = grep { $_ eq '--nolocal' }  @ARGV;
+if ($gui) {
+    %prereqs = qw(
+    Class::Accessor                 0
+    Wx                              0.9918
+    Socket                          2.016
+    );
+    %recommends = qw(
+    Wx::GLCanvas                    0
+    );
+    if ($^O eq 'MSWin32') {
+        $recommends{"Win32::TieRegistry"} = 0;
+        # we need an up-to-date Win32::API because older aren't thread-safe (GH #2517)
+        $prereqs{'Win32::API'} = 0.79;
+    }
+}
+
+my @missing_prereqs = ();
+if ($ENV{SLIC3R_NO_AUTO}) {
+    foreach my $module (sort keys %prereqs) {
+        my $version = $prereqs{$module};
+        next if eval "use $module $version; 1";
+        push @missing_prereqs, $module if exists $prereqs{$module};
+        print "Missing prerequisite $module $version\n";
+    }
+    foreach my $module (sort keys %recommends) {
+        my $version = $recommends{$module};
+        next if eval "use $module $version; 1";
+        print "Missing optional $module $version\n";
+    }
+} else {
+    my @try = (
+        $ENV{CPANM} // (),
+        File::Spec->catfile($Config{sitebin}, 'cpanm'),
+        File::Spec->catfile($Config{installscript}, 'cpanm'),
+    );
+    
+    my $cpanm;
+    foreach my $path (@try) {
+        if (-e $path) {  # don't use -x because it fails on Windows
+            $cpanm = $path;
+            last;
+        }
+    }
+    if (!$cpanm) {
+        if ($^O =~ /^(?:darwin|linux)$/ && system(qw(which cpanm)) == 0) {
+            $cpanm = 'cpanm';
+        }
+    }
+    die <<'EOF'
+cpanm was not found. Please install it before running this script.
+
+There are several ways to install cpanm, try one of these:
+
+    apt-get install cpanminus
+    curl -L http://cpanmin.us | perl - --sudo App::cpanminus
+    cpan App::cpanminus
+
+If it is installed in a non-standard location you can do:
+    
+    CPANM=/path/to/cpanm perl Build.PL
+
+EOF
+        if !$cpanm;
+    my @cpanm_args = ();
+    push @cpanm_args, "--sudo" if $sudo;
+
+    # install local::lib without --local-lib otherwise it's not usable afterwards
+    if (!eval "use local::lib qw(local-lib); 1") {
+        my $res = system $cpanm, @cpanm_args, 'local::lib';
+        warn "Warning: local::lib is required. You might need to run the `cpanm --sudo local::lib` command in order to install it.\n"
+            if $res != 0;
+    }
+    
+    push @cpanm_args, ('--local-lib', 'local-lib') if ! $nolocal;
+
+    # make sure our cpanm is updated (old ones don't support the ~ syntax)
+    system $cpanm, @cpanm_args, 'App::cpanminus';
+    
+    my %modules = (%prereqs, %recommends);
+    foreach my $module (sort keys %modules) {
+        my $version = $modules{$module};
+        my @cmd = ($cpanm, @cpanm_args);
+        
+        # temporary workaround for upstream bug in test
+        push @cmd, '--notest'
+            if $module =~ /^(?:OpenGL|Test::Harness)$/;
+        
+        push @cmd, "$module~$version";
+
+        my $res = system @cmd;
+        if ($res != 0) {
+            if (exists $prereqs{$module}) {
+                push @missing_prereqs, $module;
+            } else {
+                printf "Don't worry, this module is optional.\n";
+            }
+        }
+    }
+}
+
+print "\n";
+if ($gui) {
+    print "Perl dependencies for the Slic3r GUI were installed.\n";
+} else {
+    print "Perl dependencies for Slic3r were installed.\n";
+    print "If you also want to use the GUI you can now run `perl Build.PL --gui` to install the required modules.\n";
+}
+print "\n";
+print "In the next step, you need to build the Slic3r C++ library.\n";
+print "1) Create a build directory and change to it\n";
+print "2) run cmake .. -DCMAKE_BUILD_TYPE=Release\n";
+print "3) run make\n";
+print "4) to execute the automatic tests, run ctest --verbose\n";
+__END__

CLAUDE.md

@@ -1 +0,0 @@
-@AGENTS.md

LICENSE

@@ -0,0 +1,661 @@
+                    GNU AFFERO GENERAL PUBLIC LICENSE
+                       Version 3, 19 November 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU Affero General Public License is a free, copyleft license for
+software and other kinds of works, specifically designed to ensure
+cooperation with the community in the case of network server software.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+our General Public Licenses are intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  Developers that use our General Public Licenses protect your rights
+with two steps: (1) assert copyright on the software, and (2) offer
+you this License which gives you legal permission to copy, distribute
+and/or modify the software.
+
+  A secondary benefit of defending all users' freedom is that
+improvements made in alternate versions of the program, if they
+receive widespread use, become available for other developers to
+incorporate.  Many developers of free software are heartened and
+encouraged by the resulting cooperation.  However, in the case of
+software used on network servers, this result may fail to come about.
+The GNU General Public License permits making a modified version and
+letting the public access it on a server without ever releasing its
+source code to the public.
+
+  The GNU Affero General Public License is designed specifically to
+ensure that, in such cases, the modified source code becomes available
+to the community.  It requires the operator of a network server to
+provide the source code of the modified version running there to the
+users of that server.  Therefore, public use of a modified version, on
+a publicly accessible server, gives the public access to the source
+code of the modified version.
+
+  An older license, called the Affero General Public License and
+published by Affero, was designed to accomplish similar goals.  This is
+a different license, not a version of the Affero GPL, but Affero has
+released a new version of the Affero GPL which permits relicensing under
+this license.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU Affero General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Remote Network Interaction; Use with the GNU General Public License.
+
+  Notwithstanding any other provision of this License, if you modify the
+Program, your modified version must prominently offer all users
+interacting with it remotely through a computer network (if your version
+supports such interaction) an opportunity to receive the Corresponding
+Source of your version by providing access to the Corresponding Source
+from a network server at no charge, through some standard or customary
+means of facilitating copying of software.  This Corresponding Source
+shall include the Corresponding Source for any work covered by version 3
+of the GNU General Public License that is incorporated pursuant to the
+following paragraph.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the work with which it is combined will remain governed by version
+3 of the GNU General Public License.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU Affero General Public License from time to time.  Such new versions
+will be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU Affero General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU Affero General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU Affero General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU Affero General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU Affero General Public License for more details.
+
+    You should have received a copy of the GNU Affero General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If your software can interact with users remotely through a computer
+network, you should also make sure that it provides a way for users to
+get its source.  For example, if your program is a web application, its
+interface could display a "Source" link that leads users to an archive
+of the code.  There are many ways you could offer source, and different
+solutions will be better for different programs; see section 13 for the
+specific requirements.
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU AGPL, see
+<http://www.gnu.org/licenses/>.

LICENSE.txt

@@ -1,661 +0,0 @@
-                    GNU AFFERO GENERAL PUBLIC LICENSE
-                       Version 3, 19 November 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The GNU Affero General Public License is a free, copyleft license for
-software and other kinds of works, specifically designed to ensure
-cooperation with the community in the case of network server software.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-our General Public Licenses are intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
-  Developers that use our General Public Licenses protect your rights
-with two steps: (1) assert copyright on the software, and (2) offer
-you this License which gives you legal permission to copy, distribute
-and/or modify the software.
-
-  A secondary benefit of defending all users' freedom is that
-improvements made in alternate versions of the program, if they
-receive widespread use, become available for other developers to
-incorporate.  Many developers of free software are heartened and
-encouraged by the resulting cooperation.  However, in the case of
-software used on network servers, this result may fail to come about.
-The GNU General Public License permits making a modified version and
-letting the public access it on a server without ever releasing its
-source code to the public.
-
-  The GNU Affero General Public License is designed specifically to
-ensure that, in such cases, the modified source code becomes available
-to the community.  It requires the operator of a network server to
-provide the source code of the modified version running there to the
-users of that server.  Therefore, public use of a modified version, on
-a publicly accessible server, gives the public access to the source
-code of the modified version.
-
-  An older license, called the Affero General Public License and
-published by Affero, was designed to accomplish similar goals.  This is
-a different license, not a version of the Affero GPL, but Affero has
-released a new version of the Affero GPL which permits relicensing under
-this license.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU Affero General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
-  13. Remote Network Interaction; Use with the GNU General Public License.
-
-  Notwithstanding any other provision of this License, if you modify the
-Program, your modified version must prominently offer all users
-interacting with it remotely through a computer network (if your version
-supports such interaction) an opportunity to receive the Corresponding
-Source of your version by providing access to the Corresponding Source
-from a network server at no charge, through some standard or customary
-means of facilitating copying of software.  This Corresponding Source
-shall include the Corresponding Source for any work covered by version 3
-of the GNU General Public License that is incorporated pursuant to the
-following paragraph.
-
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the work with which it is combined will remain governed by version
-3 of the GNU General Public License.
-
-  14. Revised Versions of this License.
-
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU Affero General Public License from time to time.  Such new versions
-will be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU Affero General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU Affero General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
-  If the Program specifies that a proxy can decide which future
-versions of the GNU Affero General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
-  15. Disclaimer of Warranty.
-
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU Affero General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU Affero General Public License for more details.
-
-    You should have received a copy of the GNU Affero General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If your software can interact with users remotely through a computer
-network, you should also make sure that it provides a way for users to
-get its source.  For example, if your program is a web application, its
-interface could display a "Source" link that leads users to an archive
-of the code.  There are many ways you could offer source, and different
-solutions will be better for different programs; see section 13 for the
-specific requirements.
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU AGPL, see
-<http://www.gnu.org/licenses/>.

README.md

@@ -1,51 +1,388 @@
-# OrcaSlicer-KX
+_Q: Oh cool, a new RepRap slicer?_
 
-**OrcaSlicer builds with extra Anycubic Kobra X patches**
+A: Yes.
 
-Pre-built [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) binaries that bundle in-progress PRs improving Kobra X support — recommended for use with [KX-Bridge](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
+Slic3r
+======
+Prebuilt Windows, OSX and Linux binaries are available through the [git releases page](https://github.com/prusa3d/Slic3r/releases).
 
-[![Download](https://img.shields.io/badge/Download-Releases-2EA043?style=for-the-badge&logo=gitea&logoColor=white)](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases)
+<img width=256 src=https://cloud.githubusercontent.com/assets/31754/22719818/09998c92-ed6d-11e6-9fa0-09de638f3a36.png />
 
----
+Slic3r takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for 
+3D printers. It's compatible with any modern printer based on the RepRap toolchain,
+including all those based on the Marlin, Sprinter and Repetier firmware. It also works
+with Mach3, LinuxCNC and Machinekit controllers.
 
-## Custom Filament Presets & KX-Bridge
+See the [project homepage](http://slic3r.org/) at slic3r.org and the
+[manual](http://manual.slic3r.org/) for more information.
 
-📄 [How to create, verify and import custom filament presets](https://gitea.it-drui.de/viewit/KX-Bridge-Release/src/branch/master/docs/filament-preset-bridge-guide.md)
+### What language is it written in?
 
----
+The core geometric algorithms and data structures are written in C++,
+and Perl is used for high-level flow abstraction, GUI and testing.
+If you're wondering why Perl, see https://xkcd.com/224/
 
-## Included patches
+The C++ API is public and its use in other projects is encouraged.
+The goal is to make Slic3r fully modular so that any part of its logic
+can be used separately.
 
-- **[PR #13372](https://github.com/SoftFever/OrcaSlicer/pull/13372)** — Moonraker / Happy-Hare AMS sync fix
-- **[PR #13529](https://github.com/SoftFever/OrcaSlicer/pull/13529)** — Anycubic Kobra X printer profiles
-- **[PR #13677](https://github.com/SoftFever/OrcaSlicer/pull/13677)** — Kobra X G-code fix
-- **[PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)** — Vendor + name matching for Moonraker filament sync
-- KX-specific filament-hint patches (unique `filament_id` for user presets, 3-pass matching, sub-brands)
+### What are Slic3r's main features?
 
----
+Key features are:
 
-## Download
+* **multi-platform** (Linux/Mac/Win) and packaged as standalone-app with no dependencies required
+* complete **command-line interface** to use it with no GUI
+* multi-material **(multiple extruders)** object printing
+* multiple G-code flavors supported (RepRap, Makerbot, Mach3, Machinekit etc.)
+* ability to plate **multiple objects having distinct print settings**
+* **multithread** processing
+* **STL auto-repair** (tolerance for broken models)
+* wide automated unit testing
 
-Get the latest binaries from the [Releases page](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases):
+Other major features are:
 
-- **Linux:** `OrcaSlicer_Linux_V*.AppImage` — `chmod +x` and run
-- **Windows:** `OrcaSlicer-Windows-x64.zip` — extract and run `orca-slicer.exe`
+* combine infill every 'n' perimeters layer to speed up printing
+* **3D preview** (including multi-material files)
+* **multiple layer heights** in a single print
+* **spiral vase** mode for bumpless vases
+* fine-grained configuration of speed, acceleration, extrusion width
+* several infill patterns including honeycomb, spirals, Hilbert curves
+* support material, raft, brim, skirt
+* **standby temperature** and automatic wiping for multi-extruder printing
+* customizable **G-code macros** and output filename with variable placeholders
+* support for **post-processing scripts**
+* **cooling logic** controlling fan speed and dynamic print speed
 
-Checksums in `SHA256SUMS.txt`. macOS is not provided here — build from upstream.
+### How to install?
 
-> ⚠ This is an **alpha build** (OrcaSlicer 2.4.0-alpha). Use at your own risk.
+You can download a precompiled package from [slic3r.org](http://slic3r.org/);
+it will run without the need for any dependency.
 
----
+If you want to compile the source yourself follow the instructions on one of these wiki pages: 
+* [Linux](https://github.com/alexrj/Slic3r/wiki/Running-Slic3r-from-git-on-GNU-Linux)
+* [Windows](https://github.com/prusa3d/Slic3r/wiki/How-to-compile-Slic3r-Prusa-Edition-on-MS-Windows)
+* [Mac OSX](https://github.com/alexrj/Slic3r/wiki/Running-Slic3r-from-git-on-OS-X)
 
-## Why a separate repo?
+### Can I help?
 
-KX-Bridge itself is hosted at [viewit/KX-Bridge-Release](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
-OrcaSlicer is a different project under a different license (AGPL-3.0) — kept separate so licenses, source provenance and update cycles do not get tangled.
+Sure! You can do the following to find things that are available to help with:
+* [Pull Request Milestone](https://github.com/alexrj/Slic3r/milestone/31)
+    * Please comment in the related github issue that you are working on it so that other people know. 
+* Items in the [TODO](https://github.com/alexrj/Slic3r/wiki/TODO) wiki page.
+    * Please comment in the related github issue that you are working on it so that other people know. 
+* Drop me a line at aar@cpan.org.
+* You can also find me (rarely) in #reprap and in #slic3r on [FreeNode](https://webchat.freenode.net) with the nickname _Sound_. Another contributor, _LoH_, is also in both channels.
+* Add an [issue](https://github.com/alexrj/Slic3r/issues) to the github tracker if it isn't already present.
 
----
+Before sending patches and pull requests contact me (preferably through opening a github issue or commenting on an existing, related, issue) to discuss your proposed
+changes: this way we'll ensure nobody wastes their time and no conflicts arise
+in development.
 
-## License & source
+### What's Slic3r license?
 
-These builds are derivatives of [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer), licensed under **GNU AGPL-3.0**.
-The KX-specific patches live on branch [`build-alpha-pr-kx-filament-hint`](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/src/branch/build-alpha-pr-kx-filament-hint) of this repository.
+Slic3r is licensed under the _GNU Affero General Public License, version 3_.
+The author is Alessandro Ranellucci.
 
+The [Silk icon set](http://www.famfamfam.com/lab/icons/silk/) used in Slic3r is
+licensed under the _Creative Commons Attribution 3.0 License_.
+The author of the Silk icon set is Mark James.
+
+### How can I invoke slic3r.pl using the command line?
+
+    Usage: slic3r.pl [ OPTIONS ] [ file.stl ] [ file2.stl ] ...
+    
+        --help              Output this usage screen and exit
+        --version           Output the version of Slic3r and exit
+        --save <file>       Save configuration to the specified file
+        --load <file>       Load configuration from the specified file. It can be used
+                            more than once to load options from multiple files.
+        -o, --output <file> File to output gcode to (by default, the file will be saved
+                            into the same directory as the input file using the
+                            --output-filename-format to generate the filename.) If a
+                            directory is specified for this option, the output will
+                            be saved under that directory, and the filename will be
+                            generated by --output-filename-format.
+
+      Non-slicing actions (no G-code will be generated):
+        --repair            Repair given STL files and save them as <name>_fixed.obj
+        --cut <z>           Cut given input files at given Z (relative) and export
+                            them as <name>_upper.stl and <name>_lower.stl
+        --split             Split the shells contained in given STL file into several STL files
+        --info              Output information about the supplied file(s) and exit
+    
+        -j, --threads <num> Number of threads to use (1+, default: 2)
+    
+      GUI options:
+        --gui               Forces the GUI launch instead of command line slicing (if you
+                            supply a model file, it will be loaded into the plater)
+        --no-plater         Disable the plater tab
+        --no-gui            Forces the command line slicing instead of gui. 
+                            This takes precedence over --gui if both are present.
+        --autosave <file>   Automatically export current configuration to the specified file
+    
+      Output options:
+        --output-filename-format
+                            Output file name format; all config options enclosed in brackets
+                            will be replaced by their values, as well as [input_filename_base]
+                            and [input_filename] (default: [input_filename_base].gcode)
+        --post-process      Generated G-code will be processed with the supplied script;
+                            call this more than once to process through multiple scripts.
+        --export-svg        Export a SVG file containing slices instead of G-code.
+        -m, --merge         If multiple files are supplied, they will be composed into a single
+                            print rather than processed individually.
+    
+      Printer options:
+        --nozzle-diameter   Diameter of nozzle in mm (default: 0.5)
+        --print-center      Coordinates in mm of the point to center the print around
+                            (default: 100,100)
+        --z-offset          Additional height in mm to add to vertical coordinates
+                            (+/-, default: 0)
+        --gcode-flavor      The type of G-code to generate (reprap/teacup/repetier/makerware/sailfish/mach3/machinekit/smoothie/no-extrusion,
+                            default: reprap)
+        --use-relative-e-distances Enable this to get relative E values (default: no)
+        --use-firmware-retraction  Enable firmware-controlled retraction using G10/G11 (default: no)
+        --use-volumetric-e  Express E in cubic millimeters and prepend M200 (default: no)
+        --gcode-comments    Make G-code verbose by adding comments (default: no)
+    
+      Filament options:
+        --filament-diameter Diameter in mm of your raw filament (default: 3)
+        --extrusion-multiplier
+                            Change this to alter the amount of plastic extruded. There should be
+                            very little need to change this value, which is only useful to
+                            compensate for filament packing (default: 1)
+        --temperature       Extrusion temperature in degree Celsius, set 0 to disable (default: 200)
+        --first-layer-temperature Extrusion temperature for the first layer, in degree Celsius,
+                            set 0 to disable (default: same as --temperature)
+        --bed-temperature   Heated bed temperature in degree Celsius, set 0 to disable (default: 0)
+        --first-layer-bed-temperature Heated bed temperature for the first layer, in degree Celsius,
+                            set 0 to disable (default: same as --bed-temperature)
+    
+      Speed options:
+        --travel-speed      Speed of non-print moves in mm/s (default: 130)
+        --perimeter-speed   Speed of print moves for perimeters in mm/s (default: 30)
+        --small-perimeter-speed
+                            Speed of print moves for small perimeters in mm/s or % over perimeter speed
+                            (default: 30)
+        --external-perimeter-speed
+                            Speed of print moves for the external perimeter in mm/s or % over perimeter speed
+                            (default: 70%)
+        --infill-speed      Speed of print moves in mm/s (default: 60)
+        --solid-infill-speed Speed of print moves for solid surfaces in mm/s or % over infill speed
+                            (default: 60)
+        --top-solid-infill-speed Speed of print moves for top surfaces in mm/s or % over solid infill speed
+                            (default: 50)
+        --support-material-speed
+                            Speed of support material print moves in mm/s (default: 60)
+        --support-material-interface-speed
+                            Speed of support material interface print moves in mm/s or % over support material
+                            speed (default: 100%)
+        --bridge-speed      Speed of bridge print moves in mm/s (default: 60)
+        --gap-fill-speed    Speed of gap fill print moves in mm/s (default: 20)
+        --first-layer-speed Speed of print moves for bottom layer, expressed either as an absolute
+                            value or as a percentage over normal speeds (default: 30%)
+    
+      Acceleration options:
+        --perimeter-acceleration
+                            Overrides firmware's default acceleration for perimeters. (mm/s^2, set zero
+                            to disable; default: 0)
+        --infill-acceleration
+                            Overrides firmware's default acceleration for infill. (mm/s^2, set zero
+                            to disable; default: 0)
+        --bridge-acceleration
+                            Overrides firmware's default acceleration for bridges. (mm/s^2, set zero
+                            to disable; default: 0)
+        --first-layer-acceleration
+                            Overrides firmware's default acceleration for first layer. (mm/s^2, set zero
+                            to disable; default: 0)
+        --default-acceleration
+                            Acceleration will be reset to this value after the specific settings above
+                            have been applied. (mm/s^2, set zero to disable; default: 0)
+    
+      Accuracy options:
+        --layer-height      Layer height in mm (default: 0.3)
+        --first-layer-height Layer height for first layer (mm or %, default: 0.35)
+        --infill-every-layers
+                            Infill every N layers (default: 1)
+        --solid-infill-every-layers
+                            Force a solid layer every N layers (default: 0)
+    
+      Print options:
+        --perimeters        Number of perimeters/horizontal skins (range: 0+, default: 3)
+        --top-solid-layers  Number of solid layers to do for top surfaces (range: 0+, default: 3)
+        --bottom-solid-layers  Number of solid layers to do for bottom surfaces (range: 0+, default: 3)
+        --solid-layers      Shortcut for setting the two options above at once
+        --fill-density      Infill density (range: 0%-100%, default: 40%)
+        --fill-angle        Infill angle in degrees (range: 0-90, default: 45)
+        --fill-pattern      Pattern to use to fill non-solid layers (default: honeycomb)
+        --solid-fill-pattern Pattern to use to fill solid layers (default: rectilinear)
+        --start-gcode       Load initial G-code from the supplied file. This will overwrite
+                            the default command (home all axes [G28]).
+        --end-gcode         Load final G-code from the supplied file. This will overwrite
+                            the default commands (turn off temperature [M104 S0],
+                            home X axis [G28 X], disable motors [M84]).
+        --before-layer-gcode  Load before-layer-change G-code from the supplied file (default: nothing).
+        --layer-gcode       Load after-layer-change G-code from the supplied file (default: nothing).
+        --toolchange-gcode  Load tool-change G-code from the supplied file (default: nothing).
+        --seam-position     Position of loop starting points (random/nearest/aligned, default: aligned).
+        --external-perimeters-first Reverse perimeter order. (default: no)
+        --spiral-vase       Experimental option to raise Z gradually when printing single-walled vases
+                            (default: no)
+        --only-retract-when-crossing-perimeters
+                            Disable retraction when travelling between infill paths inside the same island.
+                            (default: no)
+        --solid-infill-below-area
+                            Force solid infill when a region has a smaller area than this threshold
+                            (mm^2, default: 70)
+        --infill-only-where-needed
+                            Only infill under ceilings (default: no)
+        --infill-first      Make infill before perimeters (default: no)
+    
+       Quality options (slower slicing):
+        --extra-perimeters  Add more perimeters when needed (default: yes)
+        --avoid-crossing-perimeters Optimize travel moves so that no perimeters are crossed (default: no)
+        --thin-walls        Detect single-width walls (default: yes)
+        --overhangs         Experimental option to use bridge flow, speed and fan for overhangs
+                            (default: yes)
+    
+       Support material options:
+        --support-material  Generate support material for overhangs
+        --support-material-threshold
+                            Overhang threshold angle (range: 0-90, set 0 for automatic detection,
+                            default: 0)
+        --support-material-pattern
+                            Pattern to use for support material (default: honeycomb)
+        --support-material-spacing
+                            Spacing between pattern lines (mm, default: 2.5)
+        --support-material-angle
+                            Support material angle in degrees (range: 0-90, default: 0)
+        --support-material-contact-distance
+                            Vertical distance between object and support material
+                            (0+, default: 0.2)
+        --support-material-interface-layers
+                            Number of perpendicular layers between support material and object (0+, default: 3)
+        --support-material-interface-spacing
+                            Spacing between interface pattern lines (mm, set 0 to get a solid layer, default: 0)
+        --raft-layers       Number of layers to raise the printed objects by (range: 0+, default: 0)
+        --support-material-enforce-layers
+                            Enforce support material on the specified number of layers from bottom,
+                            regardless of --support-material and threshold (0+, default: 0)
+        --dont-support-bridges
+                            Experimental option for preventing support material from being generated under bridged areas (default: yes)
+    
+       Retraction options:
+        --retract-length    Length of retraction in mm when pausing extrusion (default: 1)
+        --retract-speed     Speed for retraction in mm/s (default: 30)
+        --retract-restart-extra
+                            Additional amount of filament in mm to push after
+                            compensating retraction (default: 0)
+        --retract-before-travel
+                            Only retract before travel moves of this length in mm (default: 2)
+        --retract-lift      Lift Z by the given distance in mm when retracting (default: 0)
+        --retract-lift-above Only lift Z when above the specified height (default: 0)
+        --retract-lift-below Only lift Z when below the specified height (default: 0)
+        --retract-layer-change
+                            Enforce a retraction before each Z move (default: no)
+        --wipe              Wipe the nozzle while doing a retraction (default: no)
+    
+       Retraction options for multi-extruder setups:
+        --retract-length-toolchange
+                            Length of retraction in mm when disabling tool (default: 10)
+        --retract-restart-extra-toolchange
+                            Additional amount of filament in mm to push after
+                            switching tool (default: 0)
+    
+       Cooling options:
+        --cooling           Enable fan and cooling control
+        --min-fan-speed     Minimum fan speed (default: 35%)
+        --max-fan-speed     Maximum fan speed (default: 100%)
+        --bridge-fan-speed  Fan speed to use when bridging (default: 100%)
+        --fan-below-layer-time Enable fan if layer print time is below this approximate number
+                            of seconds (default: 60)
+        --slowdown-below-layer-time Slow down if layer print time is below this approximate number
+                            of seconds (default: 30)
+        --min-print-speed   Minimum print speed (mm/s, default: 10)
+        --disable-fan-first-layers Disable fan for the first N layers (default: 1)
+        --fan-always-on     Keep fan always on at min fan speed, even for layers that don't need
+                            cooling
+    
+       Skirt options:
+        --skirts            Number of skirts to draw (0+, default: 1)
+        --skirt-distance    Distance in mm between innermost skirt and object
+                            (default: 6)
+        --skirt-height      Height of skirts to draw (expressed in layers, 0+, default: 1)
+        --min-skirt-length  Generate no less than the number of loops required to consume this length
+                            of filament on the first layer, for each extruder (mm, 0+, default: 0)
+        --brim-width        Width of the brim that will get added to each object to help adhesion
+                            (mm, default: 0)
+    
+       Transform options:
+        --scale             Factor for scaling input object (default: 1)
+        --rotate            Rotation angle in degrees (0-360, default: 0)
+        --duplicate         Number of items with auto-arrange (1+, default: 1)
+        --duplicate-grid    Number of items with grid arrangement (default: 1,1)
+        --duplicate-distance Distance in mm between copies (default: 6)
+        --dont-arrange      Don't arrange the objects on the build plate. The model coordinates
+                            define the absolute positions on the build plate. 
+                            The option --print-center will be ignored.
+        --xy-size-compensation
+                            Grow/shrink objects by the configured absolute distance (mm, default: 0)
+    
+       Sequential printing options:
+        --complete-objects  When printing multiple objects and/or copies, complete each one before
+                            starting the next one; watch out for extruder collisions (default: no)
+        --extruder-clearance-radius Radius in mm above which extruder won't collide with anything
+                            (default: 20)
+        --extruder-clearance-height Maximum vertical extruder depth; i.e. vertical distance from
+                            extruder tip and carriage bottom (default: 20)
+    
+       Miscellaneous options:
+        --notes             Notes to be added as comments to the output file
+        --resolution        Minimum detail resolution (mm, set zero for full resolution, default: 0)
+    
+       Flow options (advanced):
+        --extrusion-width   Set extrusion width manually; it accepts either an absolute value in mm
+                            (like 0.65) or a percentage over layer height (like 200%)
+        --first-layer-extrusion-width
+                            Set a different extrusion width for first layer
+        --perimeter-extrusion-width
+                            Set a different extrusion width for perimeters
+        --external-perimeter-extrusion-width
+                            Set a different extrusion width for external perimeters
+        --infill-extrusion-width
+                            Set a different extrusion width for infill
+        --solid-infill-extrusion-width
+                            Set a different extrusion width for solid infill
+        --top-infill-extrusion-width
+                            Set a different extrusion width for top infill
+        --support-material-extrusion-width
+                            Set a different extrusion width for support material
+        --infill-overlap    Overlap between infill and perimeters (default: 15%)
+        --bridge-flow-ratio Multiplier for extrusion when bridging (> 0, default: 1)
+    
+       Multiple extruder options:
+        --extruder-offset   Offset of each extruder, if firmware doesn't handle the displacement
+                            (can be specified multiple times, default: 0x0)
+        --perimeter-extruder
+                            Extruder to use for perimeters and brim (1+, default: 1)
+        --infill-extruder   Extruder to use for infill (1+, default: 1)
+        --solid-infill-extruder   Extruder to use for solid infill (1+, default: 1)
+        --support-material-extruder
+                            Extruder to use for support material, raft and skirt (1+, default: 1)
+        --support-material-interface-extruder
+                            Extruder to use for support material interface (1+, default: 1)
+                            --ooze-prevention   Drop temperature and park extruders outside a full skirt for automatic wiping
+                            (default: no)
+        --ooze-prevention   Drop temperature and park extruders outside a full skirt for automatic wiping
+                            (default: no)
+        --standby-temperature-delta
+                            Temperature difference to be applied when an extruder is not active and
+                            --ooze-prevention is enabled (default: -5)
+
+
+If you want to change a preset file, just do
+
+    slic3r.pl --load config.ini --layer-height 0.25 --save config.ini
+
+If you want to slice a file overriding an option contained in your preset file:
+
+    slic3r.pl --load config.ini --layer-height 0.25 file.stl

SECURITY.md

@@ -1,47 +0,0 @@
-# Security Policy
-
-At OrcaSlicer, we are committed to maintaining the security of our ecosystem. Our policy is to ensure that we do not introduce vulnerabilities and that any security issues are addressed promptly and responsibly. We appreciate your help in improving the security of OrcaSlicer and thank you for your responsible disclosure.
-Reporting Security Bugs
-
-## To report a security bug, please follow these guidelines:
-
-  * Email Security Bugs:
-        Send an email to the lead maintainer at softfeverever@gmail.com.
-        Include the word "SECURITY" in the subject line of your email.
-
-  * Response Times:
-        The lead maintainer will acknowledge receipt of your email within one week (7 days).
-        A detailed response will follow within 48 hours, outlining the next steps for handling your report.
-        After the initial reply, the security team will keep you informed about the progress toward a fix and any announcements.
-
-  * Information and Collaboration:
-        We may request additional information or guidance as we work on addressing the issue.
-
-  * Handling the Report:
-        OrcaSlicer will confirm the problem and determine the affected versions.
-        We will audit the code to find any similar issues and prepare fixes for all releases still under maintenance.
-        Fixes will be released as quickly as possible.
-
-  * Third-Party Modules:
-        Report security issues in third-party modules to the respective maintainer of those modules.
-
-## Security Disclosure Guidelines
-
-When disclosing a vulnerability, please follow these steps to ensure your report is clear and actionable:
-
-  * Provide Detailed Information:
-        Scope: Clearly define the scope of the vulnerability.
-        Potential Impact: Let us know who could be affected by this exploit.
-        Reproduction Steps: Document detailed steps to reproduce the vulnerability.
-
-    Reference OWASP Guidelines:
-        Follow the <a href="https://cheatsheetseries.owasp.org/cheatsheets/Vulnerability_Disclosure_Cheat_Sheet.html">OWASP Vulnerability Disclosure Cheat Sheet</a> for best practices in vulnerability disclosure.
-
-## Security Recommendations
-
-To enhance security when using OrcaSlicer, we recommend following these steps:
-
-  * SEE SOMETHING: If you notice anything suspicious or have concerns, please report it.
-  * SAY SOMETHING: If you have any doubts or need assistance, do not hesitate to contact us.
-
-### Thank you for your commitment to the security of OrcaSlicer. Your efforts help us maintain a safe and reliable ecosystem.

build_flatpak.sh

@@ -1,377 +0,0 @@
-#!/bin/bash
-
-# OrcaSlicer Flatpak Build Script
-# This script builds and packages OrcaSlicer as a Flatpak package locally
-# Based on the GitHub Actions workflow in .github/workflows/build_all.yml
-
-set -e
-SECONDS=0
-
-# Colors for output
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[1;33m'
-BLUE='\033[0;34m'
-NC='\033[0m' # No Color
-
-# Default values
-ARCH=$(uname -m)
-BUILD_DIR="build_flatpak"
-CLEANUP=false
-INSTALL_RUNTIME=false
-JOBS=$(nproc)
-FORCE_CLEAN=false
-ENABLE_CCACHE=false
-DISABLE_ROFILES_FUSE=false
-NO_DEBUGINFO=true
-CACHE_DIR=".flatpak-builder"
-
-# Help function
-show_help() {
-    echo "Usage: $0 [OPTIONS]"
-    echo ""
-    echo "Build OrcaSlicer as a Flatpak package"
-    echo ""
-    echo "Options:"
-    echo "  -a, --arch ARCH        Target architecture (x86_64, aarch64) [default: $ARCH]"
-    echo "  -d, --build-dir DIR    Build directory [default: $BUILD_DIR]"
-    echo "  -j, --jobs JOBS        Number of parallel build jobs for flatpak-builder and modules [default: $JOBS]"
-    echo "  -c, --cleanup          Clean build directory before building"
-    echo "  -f, --force-clean      Force clean build (disables caching)"
-    echo "  --ccache               Enable ccache for faster rebuilds (requires ccache in SDK)"
-    echo "  --disable-rofiles-fuse Disable rofiles-fuse (workaround for FUSE issues)"
-    echo "  --with-debuginfo       Include debug info (slower builds, needed for Flathub)"
-    echo "  --cache-dir DIR        Flatpak builder cache directory [default: $CACHE_DIR]"
-    echo "  -i, --install-runtime  Install required Flatpak runtime and SDK"
-    echo "  -h, --help             Show this help message"
-    echo ""
-    echo "Examples:"
-    echo "  $0                     # Build for current architecture with caching enabled"
-    echo "  $0 -f                  # Force clean build (no caching)"
-    echo "  $0 --ccache -j 8       # Use ccache and 8 parallel jobs for faster builds"
-    echo "  $0 -a x86_64 -c       # Build for x86_64 and cleanup first"
-    echo "  $0 -i -j 16 --ccache  # Install runtime, build with 16 jobs and ccache"
-}
-
-# Parse command line arguments
-while [[ $# -gt 0 ]]; do
-    case $1 in
-        -a|--arch)
-            ARCH="$2"
-            shift 2
-            ;;
-        -d|--build-dir)
-            BUILD_DIR="$2"
-            shift 2
-            ;;
-        -j|--jobs)
-            JOBS="$2"
-            shift 2
-            ;;
-        -c|--cleanup)
-            CLEANUP=true
-            shift
-            ;;
-        -f|--force-clean)
-            FORCE_CLEAN=true
-            shift
-            ;;
-        --ccache)
-            ENABLE_CCACHE=true
-            shift
-            ;;
-        --disable-rofiles-fuse)
-            DISABLE_ROFILES_FUSE=true
-            shift
-            ;;
-        --with-debuginfo)
-            NO_DEBUGINFO=false
-            shift
-            ;;
-        --cache-dir)
-            CACHE_DIR="$2"
-            shift 2
-            ;;
-        -i|--install-runtime)
-            INSTALL_RUNTIME=true
-            shift
-            ;;
-        -h|--help)
-            show_help
-            exit 0
-            ;;
-        *)
-            echo -e "${RED}Error: Unknown option $1${NC}"
-            show_help
-            exit 1
-            ;;
-    esac
-done
-
-# Validate architecture
-if [[ "$ARCH" != "x86_64" && "$ARCH" != "aarch64" ]]; then
-    echo -e "${RED}Error: Unsupported architecture '$ARCH'. Supported: x86_64, aarch64${NC}"
-    exit 1
-fi
-
-# Validate jobs parameter
-if ! [[ "$JOBS" =~ ^[1-9][0-9]*$ ]]; then
-    echo -e "${RED}Error: Jobs must be a positive integer, got '$JOBS'${NC}"
-    exit 1
-fi
-
-echo -e "${BLUE}OrcaSlicer Flatpak Build Script${NC}"
-echo -e "${BLUE}================================${NC}"
-echo -e "Architecture: ${GREEN}$ARCH${NC}"
-echo -e "Build directory: ${GREEN}$BUILD_DIR${NC}"
-echo -e "Cache directory: ${GREEN}$CACHE_DIR${NC}"
-echo -e "Parallel jobs: ${GREEN}$JOBS${NC}"
-if [[ "$FORCE_CLEAN" == true ]]; then
-    echo -e "Cache mode: ${RED}DISABLED (force clean)${NC}"
-else
-    echo -e "Cache mode: ${GREEN}ENABLED${NC}"
-fi
-if [[ "$ENABLE_CCACHE" == true ]]; then
-    echo -e "Ccache: ${GREEN}ENABLED${NC}"
-else
-    echo -e "Ccache: ${YELLOW}DISABLED${NC}"
-fi
-echo ""
-
-# Check available disk space (flatpak builds need several GB)
-AVAILABLE_SPACE=$(df . | awk 'NR==2 {print $4}')
-REQUIRED_SPACE=$((5 * 1024 * 1024))  # 5GB in KB
-
-if [[ $AVAILABLE_SPACE -lt $REQUIRED_SPACE ]]; then
-    echo -e "${YELLOW}Warning: Low disk space detected.${NC}"
-    echo -e "Available: $(( AVAILABLE_SPACE / 1024 / 1024 ))GB, Recommended: 5GB+"
-    echo -e "Continue anyway? (y/N)"
-    read -r response
-    if [[ ! "$response" =~ ^[Yy]$ ]]; then
-        echo "Build cancelled by user"
-        exit 1
-    fi
-fi
-
-# Check if flatpak is installed
-if ! command -v flatpak &> /dev/null; then
-    echo -e "${RED}Error: Flatpak is not installed. Please install it first.${NC}"
-    echo "On Ubuntu/Debian: sudo apt install flatpak"
-    echo "On Fedora: sudo dnf install flatpak"
-    echo "On Arch: sudo pacman -S flatpak"
-    exit 1
-fi
-
-# Check if flatpak-builder is installed
-if ! command -v flatpak-builder &> /dev/null; then
-    echo -e "${RED}Error: flatpak-builder is not installed. Please install it first.${NC}"
-    echo "On Ubuntu/Debian: sudo apt install flatpak-builder"
-    echo "On Fedora: sudo dnf install flatpak-builder"
-    echo "On Arch: sudo pacman -S flatpak-builder"
-    exit 1
-fi
-
-# Check additional build dependencies
-echo -e "${YELLOW}Checking build dependencies...${NC}"
-MISSING_DEPS=()
-
-if ! command -v cmake &> /dev/null; then
-    MISSING_DEPS+=("cmake")
-fi
-
-if ! command -v ninja &> /dev/null && ! command -v make &> /dev/null; then
-    MISSING_DEPS+=("ninja or make")
-fi
-
-if ! command -v pkg-config &> /dev/null; then
-    MISSING_DEPS+=("pkg-config")
-fi
-
-if [ ${#MISSING_DEPS[@]} -ne 0 ]; then
-    echo -e "${RED}Error: Missing required build dependencies: ${MISSING_DEPS[*]}${NC}"
-    echo "On Ubuntu/Debian: sudo apt install cmake ninja-build pkg-config"
-    echo "On Fedora: sudo dnf install cmake ninja-build pkgconfig"
-    exit 1
-fi
-
-echo -e "${GREEN}All required dependencies found${NC}"
-
-# Install runtime and SDK if requested
-if [[ "$INSTALL_RUNTIME" == true ]]; then
-    echo -e "${YELLOW}Installing GNOME runtime and SDK...${NC}"
-    flatpak install --user -y flathub org.gnome.Platform//50
-    flatpak install --user -y flathub org.gnome.Sdk//50
-fi
-
-# Check if required runtime is available
-if ! flatpak info --user org.gnome.Platform//50 &> /dev/null; then
-    echo -e "${RED}Error: GNOME Platform 50 runtime is not installed.${NC}"
-    echo "Run with -i flag to install it automatically, or install manually:"
-    echo "flatpak install --user flathub org.gnome.Platform//50"
-    exit 1
-fi
-
-if ! flatpak info --user org.gnome.Sdk//50 &> /dev/null; then
-    echo -e "${RED}Error: GNOME SDK 50 is not installed.${NC}"
-    echo "Run with -i flag to install it automatically, or install manually:"
-    echo "flatpak install --user flathub org.gnome.Sdk//50"
-    exit 1
-fi
-
-# Get version information
-echo -e "${YELLOW}Getting version information...${NC}"
-if [[ -f "version.inc" ]]; then
-    VER_PURE=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
-    VER="V$VER_PURE"
-    DATE=$(date +'%Y%m%d')
-    echo -e "Version: ${GREEN}$VER${NC}"
-    echo -e "Date: ${GREEN}$DATE${NC}"
-else
-    echo -e "${RED}Error: version.inc not found${NC}"
-    exit 1
-fi
-
-# Cleanup build directory if requested
-if [[ "$CLEANUP" == true ]]; then
-    echo -e "${YELLOW}Cleaning up flatpak-specific build directories...${NC}"
-    rm -rf deps/build_flatpak build_flatpak
-
-    echo -e "${YELLOW}Cleaning up flatpak build directories...${NC}"
-    rm -rf "$BUILD_DIR"
-    
-    # Only clean cache if force-clean is enabled
-    if [[ "$FORCE_CLEAN" == true ]]; then
-        echo -e "${YELLOW}Cleaning up flatpak build cache...${NC}"
-        rm -rf "$CACHE_DIR"
-    else
-        echo -e "${BLUE}Preserving build cache at: $CACHE_DIR${NC}"
-    fi
-    
-    echo -e "${BLUE}Note: Host build directories (deps/build, build) are preserved${NC}"
-fi
-
-# Create build directory
-mkdir -p "$BUILD_DIR"
-rm -rf "$BUILD_DIR/build-dir"
-
-# Check if flatpak manifest exists
-if [[ ! -f "./scripts/flatpak/com.orcaslicer.OrcaSlicer.yml" ]]; then
-    echo -e "${RED}Error: Flatpak manifest not found at scripts/flatpak/com.orcaslicer.OrcaSlicer.yml${NC}"
-    exit 1
-fi
-
-# Build the Flatpak
-echo -e "${YELLOW}Building Flatpak package...${NC}"
-echo -e "This may take a while (30+ minutes depending on your system)..."
-echo ""
-
-BUNDLE_NAME="OrcaSlicer-Linux-flatpak_${VER}_${ARCH}.flatpak"
-
-# Remove any existing bundle
-rm -f "$BUNDLE_NAME"
-
-# Create necessary directories inside repo
-mkdir -p "$BUILD_DIR/cache" "$BUILD_DIR/flatpak-builder"
-
-# Set environment variables to match GitHub Actions
-export FLATPAK_BUILDER_N_JOBS=$JOBS
-
-echo -e "${BLUE}Running flatpak-builder...${NC}"
-echo -e "Using $JOBS parallel jobs for flatpak-builder and $FLATPAK_BUILDER_N_JOBS for module builds"
-
-# Check flatpak-builder version to determine available options
-FLATPAK_BUILDER_VERSION=$(flatpak-builder --version 2>/dev/null | head -1 | awk '{print $2}' || echo "unknown")
-echo -e "flatpak-builder version: $FLATPAK_BUILDER_VERSION"
-
-# Build command with caching support
-BUILDER_ARGS=(
-    --arch="$ARCH"
-    --user
-    --install-deps-from=flathub
-    --repo="$BUILD_DIR/repo"
-    --verbose
-    --state-dir="$CACHE_DIR"
-    --jobs="$JOBS"
-    --mirror-screenshots-url=https://dl.flathub.org/media/
-)
-
-# Add force-clean only if explicitly requested (disables caching)
-if [[ "$FORCE_CLEAN" == true ]]; then
-    BUILDER_ARGS+=(--force-clean)
-    echo -e "${YELLOW}Using --force-clean (caching disabled)${NC}"
-else
-    echo -e "${GREEN}Using build cache for faster rebuilds${NC}"
-fi
-
-# Add ccache if enabled
-if [[ "$ENABLE_CCACHE" == true ]]; then
-    BUILDER_ARGS+=(--ccache)
-    echo -e "${GREEN}Using ccache for compiler caching${NC}"
-fi
-
-# Disable rofiles-fuse if requested (workaround for FUSE issues)
-if [[ "$DISABLE_ROFILES_FUSE" == true ]]; then
-    BUILDER_ARGS+=(--disable-rofiles-fuse)
-    echo -e "${YELLOW}rofiles-fuse disabled${NC}"
-fi
-
-# Use a temp manifest with no-debuginfo if requested
-MANIFEST="scripts/flatpak/com.orcaslicer.OrcaSlicer.yml"
-if [[ "$NO_DEBUGINFO" == true ]]; then
-    MANIFEST="scripts/flatpak/com.orcaslicer.OrcaSlicer.no-debug.yml"
-    sed '/^build-options:/a\  no-debuginfo: true\n  strip: true' \
-        scripts/flatpak/com.orcaslicer.OrcaSlicer.yml > "$MANIFEST"
-    echo -e "${YELLOW}Debug info disabled (using temp manifest)${NC}"
-fi
-
-if ! flatpak-builder \
-    "${BUILDER_ARGS[@]}" \
-    "$BUILD_DIR/build-dir" \
-    "$MANIFEST"; then
-    echo -e "${RED}Error: flatpak-builder failed${NC}"
-    echo -e "${YELLOW}Check the build log above for details${NC}"
-    rm -f "scripts/flatpak/com.orcaslicer.OrcaSlicer.no-debug.yml"
-    exit 1
-fi
-
-# Clean up temp manifest
-rm -f "scripts/flatpak/com.orcaslicer.OrcaSlicer.no-debug.yml"
-
-# Create bundle
-echo -e "${YELLOW}Creating Flatpak bundle...${NC}"
-if ! flatpak build-bundle \
-    "$BUILD_DIR/repo" \
-    "$BUNDLE_NAME" \
-    com.orcaslicer.OrcaSlicer \
-    --arch="$ARCH"; then
-    echo -e "${RED}Error: Failed to create Flatpak bundle${NC}"
-    exit 1
-fi
-
-# Success message
-echo ""
-echo -e "${GREEN}✓ Flatpak build completed successfully!${NC}"
-echo -e "Bundle created: ${GREEN}$BUNDLE_NAME${NC}"
-echo -e "Size: ${GREEN}$(du -h "$BUNDLE_NAME" | cut -f1)${NC}"
-if [[ "$FORCE_CLEAN" != true ]]; then
-    echo -e "Build cache: ${GREEN}$CACHE_DIR${NC} (preserved for faster future builds)"
-fi
-echo ""
-echo -e "${BLUE}To install the Flatpak:${NC}"
-echo -e "flatpak install --user $BUNDLE_NAME"
-echo ""
-echo -e "${BLUE}To run OrcaSlicer:${NC}"
-echo -e "flatpak run com.orcaslicer.OrcaSlicer"
-echo ""
-echo -e "${BLUE}To uninstall:${NC}"
-echo -e "flatpak uninstall --user com.orcaslicer.OrcaSlicer"
-echo ""
-if [[ "$FORCE_CLEAN" != true ]]; then
-    echo -e "${BLUE}Cache Management:${NC}"
-    echo -e "• Subsequent builds will be faster thanks to caching"
-    echo -e "• To force a clean build: $0 -f"
-    echo -e "• To clean cache manually: rm -rf $CACHE_DIR"
-fi
-
-elapsed=$SECONDS
-printf "\nBuild completed in %dh %dm %ds\n" $((elapsed/3600)) $((elapsed%3600/60)) $((elapsed%60))

build_linux.sh

@@ -1,586 +0,0 @@
-#!/usr/bin/env bash
-set -e # Exit immediately if a command exits with a non-zero status.
-SECONDS=0
-
-SCRIPT_NAME=$(basename "$0")
-SCRIPT_PATH=$(dirname "$(readlink -f "${0}")")
-
-pushd "${SCRIPT_PATH}" > /dev/null
-
-function usage() {
-    echo "Usage: ./${SCRIPT_NAME} [-1][-b][-c][-d][-D][-e][-F][-g][-h][-i][-j N][-p][-r][-s][-t][-u][-l][-L]"
-    echo "   -1: limit builds to one core (where possible)"
-    echo "   -j N: limit builds to N cores (where possible)"
-    echo "   -b: build in Debug mode"
-    echo "   -c: force a clean build"
-    echo "   -C: enable ANSI-colored compile output (GNU/Clang only)"
-    echo "   -d: download and build dependencies in ./deps/ (build prerequisite)"
-    echo "   -D: dry run"
-    echo "   -e: build in RelWithDebInfo mode"
-    echo "   -F: rebuild the cached Docker/Podman runner image from scratch when used with -g"
-    echo "   -g: run the requested build steps inside a Docker/Podman Ubuntu 24.04 container similar to the GitHub Actions Linux runner"
-    echo "   -h: prints this help text"
-    echo "   -i: build the Orca Slicer AppImage (optional)"
-    echo "   -p: boost ccache hit rate by disabling precompiled headers (default: ON)"
-    echo "   -r: skip RAM and disk checks (low RAM compiling)"
-    echo "   -s: build the Orca Slicer (optional)"
-    echo "   -t: build tests (optional), requires -s flag"
-    echo "   -u: install system dependencies (asks for sudo password; build prerequisite)"
-    echo "   -l: use Clang instead of GCC (default: GCC)"
-    echo "   -L: use ld.lld as linker (if available)"
-    echo "For a first use, you want to './${SCRIPT_NAME} -u'"
-    echo "   and then './${SCRIPT_NAME} -dsi'"
-    echo "For a GitHub Actions-like Linux build locally, use './${SCRIPT_NAME} -g -istrlL'"
-    echo "Use './${SCRIPT_NAME} -gF -istrlL' to rebuild the cached runner image first."
-    echo "Set ORCA_CONTAINER_CLI, ORCA_DOCKER_IMAGE, ORCA_DOCKER_BASE_IMAGE, or ORCA_DOCKER_CMAKE_VERSION to override the container runtime, cached image tag, base image, or CMake version."
-}
-
-SLIC3R_PRECOMPILED_HEADERS="ON"
-
-unset name
-BUILD_DIR=build
-BUILD_CONFIG=Release
-FORWARDED_ARGS=()
-while getopts ":1j:bcCdDeFghiprstulL" opt ; do
-  case ${opt} in
-    1 )
-        export CMAKE_BUILD_PARALLEL_LEVEL=1
-        FORWARDED_ARGS+=("-1")
-        ;;
-    j )
-        export CMAKE_BUILD_PARALLEL_LEVEL=$OPTARG
-        FORWARDED_ARGS+=("-j" "$OPTARG")
-        ;;
-    b )
-        BUILD_DIR=build-dbg
-        BUILD_CONFIG=Debug
-        FORWARDED_ARGS+=("-b")
-        ;;
-    c )
-        CLEAN_BUILD=1
-        FORWARDED_ARGS+=("-c")
-        ;;
-    C )
-        COLORED_OUTPUT="-DCOLORED_OUTPUT=ON"
-        FORWARDED_ARGS+=("-C")
-        ;;
-    d )
-        BUILD_DEPS="1"
-        FORWARDED_ARGS+=("-d")
-        ;;
-    D )
-        DRY_RUN="1"
-        FORWARDED_ARGS+=("-D")
-        ;;
-    e )
-        BUILD_DIR=build-dbginfo
-        BUILD_CONFIG=RelWithDebInfo
-        FORWARDED_ARGS+=("-e")
-        ;;
-    F )
-        CLEAN_DOCKER_IMAGE="1"
-        ;;
-    g )
-        USE_DOCKER="1"
-        ;;
-    h ) usage
-        exit 1
-        ;;
-    i )
-        BUILD_IMAGE="1"
-        FORWARDED_ARGS+=("-i")
-        ;;
-    p )
-        SLIC3R_PRECOMPILED_HEADERS="OFF"
-        FORWARDED_ARGS+=("-p")
-        ;;
-    r )
-        SKIP_RAM_CHECK="1"
-        FORWARDED_ARGS+=("-r")
-        ;;
-    s )
-        BUILD_ORCA="1"
-        FORWARDED_ARGS+=("-s")
-        ;;
-    t )
-        BUILD_TESTS="1"
-        FORWARDED_ARGS+=("-t")
-        ;;
-    u )
-        export UPDATE_LIB="1"
-        FORWARDED_ARGS+=("-u")
-        ;;
-    l )
-        USE_CLANG="1"
-        FORWARDED_ARGS+=("-l")
-        ;;
-    L )
-        USE_LLD="1"
-        FORWARDED_ARGS+=("-L")
-        ;;
-    * )
-	echo "Unknown argument '${opt}', aborting."
-	exit 1
-	;;
-  esac
-done
-
-if [ ${OPTIND} -eq 1 ] ; then
-    usage
-    exit 1
-fi
-
-if [[ -n "${CLEAN_DOCKER_IMAGE}" ]] && [[ -z "${USE_DOCKER}" ]] ; then
-    echo "Error: -F requires -g."
-    exit 1
-fi
-
-function check_available_memory_and_disk() {
-    FREE_MEM_GB=$(free --gibi --total | grep 'Mem' | rev | cut --delimiter=" " --fields=1 | rev)
-    MIN_MEM_GB=10
-
-    FREE_DISK_KB=$(df --block-size=1K . | tail -1 | awk '{print $4}')
-    MIN_DISK_KB=$((10 * 1024 * 1024))
-
-    if [[ ${FREE_MEM_GB} -le ${MIN_MEM_GB} ]] ; then
-        echo -e "\nERROR: Orca Slicer Builder requires at least ${MIN_MEM_GB}G of 'available' mem (system has only ${FREE_MEM_GB}G available)"
-        echo && free --human && echo
-        echo "Invoke with -r to skip RAM and disk checks."
-        exit 2
-    fi
-
-    if [[ ${FREE_DISK_KB} -le ${MIN_DISK_KB} ]] ; then
-        echo -e "\nERROR: Orca Slicer Builder requires at least $(echo "${MIN_DISK_KB}" |awk '{ printf "%.1fG\n", $1/1024/1024; }') (system has only $(echo "${FREE_DISK_KB}" | awk '{ printf "%.1fG\n", $1/1024/1024; }') disk free)"
-        echo && df --human-readable . && echo
-        echo "Invoke with -r to skip ram and disk checks."
-        exit 1
-    fi
-}
-
-function print_and_run() {
-    cmd=()
-    # Remove empty arguments, leading and trailing spaces
-    for item in "$@" ; do
-        if [[ -n $item ]]; then
-            cmd+=( "$(echo "${item}" | xargs)" )
-        fi
-    done
-
-    echo "${cmd[@]}"
-    if [[ -z "${DRY_RUN}" ]] ; then
-        "${cmd[@]}"
-    fi
-}
-
-function resolve_container_cli() {
-    if [[ -n "${ORCA_CONTAINER_CLI}" ]] ; then
-        if ! command -v "${ORCA_CONTAINER_CLI}" >/dev/null 2>&1 ; then
-            echo "Error: container runtime '${ORCA_CONTAINER_CLI}' was not found." >&2
-            exit 1
-        fi
-
-        echo "${ORCA_CONTAINER_CLI}"
-        return
-    fi
-
-    if command -v docker >/dev/null 2>&1 ; then
-        echo "docker"
-        return
-    fi
-
-    if command -v podman >/dev/null 2>&1 ; then
-        echo "podman"
-        return
-    fi
-
-    echo "Error: neither docker nor podman is available. Install one of them or set ORCA_CONTAINER_CLI." >&2
-    exit 1
-}
-
-function get_docker_runner_image() {
-    local base_image
-    local docker_cmake_version
-    local recipe_hash
-    local sanitized_base_image
-    local sanitized_cmake_version
-
-    if [[ -n "${ORCA_DOCKER_IMAGE}" ]] ; then
-        echo "${ORCA_DOCKER_IMAGE}"
-        return
-    fi
-
-    base_image="${ORCA_DOCKER_BASE_IMAGE:-ubuntu:24.04}"
-    docker_cmake_version="${ORCA_DOCKER_CMAKE_VERSION-4.3.0}"
-    recipe_hash=$(find "${SCRIPT_PATH}/build_linux.sh" "${SCRIPT_PATH}/scripts/linux.d" -type f -print0 | sort -z | xargs -0 cat | sha256sum | cut -c1-12)
-    sanitized_base_image=$(echo "${base_image}" | tr '/:@' '---' | tr -cs 'A-Za-z0-9_.-' '-')
-    sanitized_cmake_version=$(echo "${docker_cmake_version:-system}" | tr -cs 'A-Za-z0-9_.-' '-')
-    echo "orcaslicer-linux-builder:${sanitized_base_image}-cmake-${sanitized_cmake_version}-${recipe_hash}"
-}
-
-function docker_runner_dockerfile() {
-    cat <<'EOF'
-ARG BASE_IMAGE=ubuntu:24.04
-FROM ${BASE_IMAGE}
-
-ARG CMAKE_VERSION=4.3.0
-
-ENV DEBIAN_FRONTEND=noninteractive
-SHELL ["/bin/bash", "-c"]
-
-RUN apt-get update && apt-get install -y sudo ca-certificates curl tar
-
-COPY build_linux.sh /tmp/orcaslicer/build_linux.sh
-COPY scripts/linux.d /tmp/orcaslicer/scripts/linux.d
-
-WORKDIR /tmp/orcaslicer
-
-RUN chmod +x ./build_linux.sh
-RUN ./build_linux.sh -ur
-RUN if [[ -n "${CMAKE_VERSION}" ]] ; then \
-        case "$(uname -m)" in \
-            x86_64|amd64) cmake_arch="x86_64" ;; \
-            aarch64|arm64) cmake_arch="aarch64" ;; \
-            *) cmake_arch="" ;; \
-        esac ; \
-        if [[ -n "${cmake_arch}" ]] ; then \
-            cmake_root="/opt/cmake-${CMAKE_VERSION}-linux-${cmake_arch}" ; \
-            if ! curl -fsSL "https://github.com/Kitware/CMake/releases/download/v${CMAKE_VERSION}/cmake-${CMAKE_VERSION}-linux-${cmake_arch}.tar.gz" | tar -xz -C /opt ; then \
-                echo "Warning: failed to install CMake ${CMAKE_VERSION}; falling back to the distro cmake package." ; \
-            elif [[ -d "${cmake_root}" ]] ; then \
-                ln -sf "${cmake_root}/bin/"* /usr/local/bin/ ; \
-            fi ; \
-        else \
-            echo "Skipping GitHub Actions CMake install for unsupported architecture $(uname -m)." ; \
-        fi ; \
-    fi
-RUN rm -rf /var/lib/apt/lists/* /tmp/orcaslicer
-EOF
-}
-
-function ensure_docker_runner_image() {
-    local container_cli
-    local base_image
-    local runner_image
-    local docker_cmake_version
-    local image_exists="0"
-    local force_rebuild="0"
-    local -a build_cmd
-
-    container_cli="$1"
-    runner_image="$2"
-    base_image="${ORCA_DOCKER_BASE_IMAGE:-ubuntu:24.04}"
-    docker_cmake_version="${ORCA_DOCKER_CMAKE_VERSION-4.3.0}"
-
-    if "${container_cli}" image inspect "${runner_image}" >/dev/null 2>&1 ; then
-        image_exists="1"
-    fi
-
-    if [[ -n "${CLEAN_DOCKER_IMAGE}" ]] ; then
-        force_rebuild="1"
-        if [[ "${image_exists}" == "1" ]] ; then
-            echo "Removing cached container image ${runner_image} ..."
-            if [[ -z "${DRY_RUN}" ]] ; then
-                "${container_cli}" image rm -f "${runner_image}" >/dev/null
-            else
-                printf '%q ' "${container_cli}" image rm -f "${runner_image}"
-                echo
-            fi
-            image_exists="0"
-        fi
-    fi
-
-    if [[ "${image_exists}" == "1" ]] ; then
-        echo "Using cached container image ${runner_image}"
-        return
-    fi
-
-    build_cmd=(
-        "${container_cli}" build --pull
-        -t "${runner_image}"
-        --build-arg "BASE_IMAGE=${base_image}"
-        --build-arg "CMAKE_VERSION=${docker_cmake_version}"
-    )
-    if [[ "${force_rebuild}" == "1" ]] ; then
-        build_cmd+=(--no-cache)
-    fi
-    build_cmd+=(-f - "${SCRIPT_PATH}")
-
-    printf '%q ' "${build_cmd[@]}"
-    echo
-    if [[ -n "${DRY_RUN}" ]] ; then
-        return
-    fi
-
-    docker_runner_dockerfile | "${build_cmd[@]}"
-}
-
-function run_in_docker() {
-    local container_cli
-    local runner_image
-    local container_workspace
-    local host_uid
-    local host_gid
-    local host_user
-    local -a build_args
-    local -a container_env
-
-    container_cli=$(resolve_container_cli)
-    runner_image=$(get_docker_runner_image)
-    host_uid=$(id -u)
-    host_gid=$(id -g)
-    host_user="${USER:-orca}"
-    container_workspace="/__w/OrcaSlicer/OrcaSlicer"
-    build_args=()
-    for item in "${FORWARDED_ARGS[@]}" ; do
-        if [[ "${item}" == "-u" ]] || [[ "${item}" == "-D" ]] ; then
-            continue
-        fi
-
-        build_args+=("${item}")
-    done
-
-    container_env=(
-        -e "CI=true"
-        -e "GITHUB_ACTIONS=true"
-        -e "GITHUB_WORKSPACE=${container_workspace}"
-        -e "RUNNER_OS=Linux"
-        -e "RUNNER_TEMP=/tmp"
-        -e "HOST_UID=${host_uid}"
-        -e "HOST_GID=${host_gid}"
-        -e "HOST_USER=${host_user}"
-    )
-    if [[ -n "${CMAKE_BUILD_PARALLEL_LEVEL}" ]] ; then
-        container_env+=( -e "CMAKE_BUILD_PARALLEL_LEVEL=${CMAKE_BUILD_PARALLEL_LEVEL}" )
-    fi
-    if [[ -n "${ORCA_UPDATER_SIG_KEY}" ]] ; then
-        container_env+=( -e "ORCA_UPDATER_SIG_KEY=${ORCA_UPDATER_SIG_KEY}" )
-    fi
-
-    ensure_docker_runner_image "${container_cli}" "${runner_image}"
-
-    printf '%q ' "${container_cli}" run --rm -i \
-        -v "${SCRIPT_PATH}:${container_workspace}" \
-        -w "${container_workspace}" \
-        "${container_env[@]}" \
-        "${runner_image}" \
-        bash -s -- "${build_args[@]}"
-    echo
-    if [[ -n "${DRY_RUN}" ]] ; then
-        return
-    fi
-
-    "${container_cli}" run --rm -i \
-        -v "${SCRIPT_PATH}:${container_workspace}" \
-        -w "${container_workspace}" \
-        "${container_env[@]}" \
-        "${runner_image}" \
-        bash -s -- "${build_args[@]}" <<'EOF'
-set -e
-
-function create_builder_user() {
-    if [[ "${HOST_UID}" == "0" ]] ; then
-        HOST_USER=root
-        return
-    fi
-
-    if getent group "${HOST_GID}" >/dev/null 2>&1 ; then
-        HOST_GROUP=$(getent group "${HOST_GID}" | cut -d: -f1)
-    else
-        HOST_GROUP="orca-builder"
-        if getent group "${HOST_GROUP}" >/dev/null 2>&1 ; then
-            HOST_GROUP="orca-builder-${HOST_GID}"
-        fi
-        groupadd -g "${HOST_GID}" "${HOST_GROUP}"
-    fi
-
-    if getent passwd "${HOST_UID}" >/dev/null 2>&1 ; then
-        HOST_USER=$(getent passwd "${HOST_UID}" | cut -d: -f1)
-        usermod -g "${HOST_GROUP}" "${HOST_USER}"
-    elif id -u "${HOST_USER}" >/dev/null 2>&1 ; then
-        usermod -u "${HOST_UID}" -g "${HOST_GROUP}" "${HOST_USER}"
-    else
-        useradd -m -u "${HOST_UID}" -g "${HOST_GROUP}" -s /bin/bash "${HOST_USER}"
-    fi
-
-    echo "${HOST_USER} ALL=(ALL) NOPASSWD:ALL" >/etc/sudoers.d/orcaslicer-builder
-    chmod 0440 /etc/sudoers.d/orcaslicer-builder
-}
-
-create_builder_user
-mkdir -p "${GITHUB_WORKSPACE}/deps/build/destdir"
-chown -R "${HOST_UID}:${HOST_GID}" "${GITHUB_WORKSPACE}/deps/build"
-if [[ -d "${GITHUB_WORKSPACE}/build" ]] ; then
-    chown -R "${HOST_UID}:${HOST_GID}" "${GITHUB_WORKSPACE}/build"
-fi
-if [[ -d "${GITHUB_WORKSPACE}/build-dbg" ]] ; then
-    chown -R "${HOST_UID}:${HOST_GID}" "${GITHUB_WORKSPACE}/build-dbg"
-fi
-if [[ -d "${GITHUB_WORKSPACE}/build-dbginfo" ]] ; then
-    chown -R "${HOST_UID}:${HOST_GID}" "${GITHUB_WORKSPACE}/build-dbginfo"
-fi
-
-sudo -H -u "${HOST_USER}" env \
-    CMAKE_BUILD_PARALLEL_LEVEL="${CMAKE_BUILD_PARALLEL_LEVEL-}" \
-    GITHUB_WORKSPACE="${GITHUB_WORKSPACE}" \
-    ORCA_UPDATER_SIG_KEY="${ORCA_UPDATER_SIG_KEY-}" \
-    bash -c '
-        set -e
-        cd "${GITHUB_WORKSPACE}"
-        if [[ "$#" -gt 0 ]] ; then
-            ./build_linux.sh "$@"
-        else
-            echo "No build steps were requested after container setup."
-        fi
-    ' bash "$@"
-EOF
-}
-
-if [[ -n "${USE_DOCKER}" ]] ; then
-    run_in_docker
-    popd > /dev/null # ${SCRIPT_PATH}
-    exit 0
-fi
-
-# cmake 4.x compatibility workaround
-export CMAKE_POLICY_VERSION_MINIMUM=3.5
-
-DISTRIBUTION=$(awk -F= '/^ID=/ {print $2}' /etc/os-release | tr -d '"')
-DISTRIBUTION_LIKE=$(awk -F= '/^ID_LIKE=/ {print $2}' /etc/os-release | tr -d '"')
-# Check for direct distribution match to Ubuntu/Debian
-if [ "${DISTRIBUTION}" == "ubuntu" ] || [ "${DISTRIBUTION}" == "linuxmint" ] ; then
-    DISTRIBUTION="debian"
-# Check if distribution is Debian/Ubuntu-like based on ID_LIKE
-elif [[ "${DISTRIBUTION_LIKE}" == *"debian"* ]] || [[ "${DISTRIBUTION_LIKE}" == *"ubuntu"* ]] ; then
-    DISTRIBUTION="debian"
-elif [[ "${DISTRIBUTION_LIKE}" == *"arch"* ]] ; then
-    DISTRIBUTION="arch"
-elif [[ "${DISTRIBUTION_LIKE}" == *"suse"* ]] ; then
-    DISTRIBUTION="suse"
-fi
-
-if [ ! -f "./scripts/linux.d/${DISTRIBUTION}" ] ; then
-    echo "Your distribution \"${DISTRIBUTION}\" is not supported by system-dependency scripts in ./scripts/linux.d/"
-    echo "Please resolve dependencies manually and contribute a script for your distribution to upstream."
-    exit 1
-else
-    echo "resolving system dependencies for distribution \"${DISTRIBUTION}\" ..."
-    # shellcheck source=/dev/null
-    source "./scripts/linux.d/${DISTRIBUTION}"
-fi
-
-echo "FOUND_GTK3_DEV=${FOUND_GTK3_DEV}"
-if [[ -z "${FOUND_GTK3_DEV}" ]] ; then
-    echo "Error, you must install the dependencies before."
-    echo "Use option -u with sudo"
-    exit 1
-fi
-
-echo "Changing date in version..."
-{
-    # change date in version
-    sed --in-place "s/+UNKNOWN/_$(date '+%F')/" version.inc
-}
-echo "done"
-
-
-if [[ -z "${SKIP_RAM_CHECK}" ]] ; then
-    check_available_memory_and_disk
-fi
-
-export CMAKE_C_CXX_COMPILER_CLANG=()
-if [[ -n "${USE_CLANG}" ]] ; then
-    export CMAKE_C_CXX_COMPILER_CLANG=(-DCMAKE_C_COMPILER=/usr/bin/clang -DCMAKE_CXX_COMPILER=/usr/bin/clang++)
-fi
-
-# Configure use of ld.lld as the linker when requested
-export CMAKE_LLD_LINKER_ARGS=()
-if [[ -n "${USE_LLD}" ]] ; then
-    if command -v ld.lld >/dev/null 2>&1 ; then
-        LLD_BIN=$(command -v ld.lld)
-        export CMAKE_LLD_LINKER_ARGS=(-DCMAKE_LINKER="${LLD_BIN}" -DCMAKE_EXE_LINKER_FLAGS=-fuse-ld=lld -DCMAKE_SHARED_LINKER_FLAGS=-fuse-ld=lld -DCMAKE_MODULE_LINKER_FLAGS=-fuse-ld=lld)
-    else
-        echo "Error: ld.lld not found. Please install the 'lld' package (e.g., sudo apt install lld) or omit -L."
-        exit 1
-    fi
-fi
-
-# Auto-detect ccache for faster rebuilds
-export CMAKE_CCACHE_ARGS=()
-if command -v ccache >/dev/null 2>&1 ; then
-    echo "ccache found at $(command -v ccache), enabling compiler caching..."
-    export CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER=ccache -DCMAKE_CXX_COMPILER_LAUNCHER=ccache)
-else
-    echo "Note: ccache not found. Install ccache for faster rebuilds."
-fi
-
-if [[ -n "${BUILD_DEPS}" ]] ; then
-    echo "Configuring dependencies..."
-    read -r -a BUILD_ARGS <<< "${DEPS_EXTRA_BUILD_ARGS}"
-    if [[ -n "${CLEAN_BUILD}" ]]
-    then
-        print_and_run rm -fr deps/$BUILD_DIR
-    fi
-    mkdir -p deps/$BUILD_DIR
-    if [[ $BUILD_CONFIG != Release ]] ; then
-        BUILD_ARGS+=(-DCMAKE_BUILD_TYPE="${BUILD_CONFIG}")
-    fi
-
-    print_and_run cmake -S deps -B deps/$BUILD_DIR "${CMAKE_C_CXX_COMPILER_CLANG[@]}" "${CMAKE_LLD_LINKER_ARGS[@]}" -G Ninja "${COLORED_OUTPUT}" "${BUILD_ARGS[@]}"
-    print_and_run cmake --build deps/$BUILD_DIR -j1
-fi
-
-if [[ -n "${BUILD_ORCA}" ]] || [[ -n "${BUILD_TESTS}" ]] ; then
-    echo "Configuring OrcaSlicer..."
-    if [[ -n "${CLEAN_BUILD}" ]] ; then
-        print_and_run rm -fr $BUILD_DIR
-    fi
-    read -r -a BUILD_ARGS <<< "${ORCA_EXTRA_BUILD_ARGS}"
-    if [[ $BUILD_CONFIG != Release ]] ; then
-        BUILD_ARGS+=(-DCMAKE_BUILD_TYPE="${BUILD_CONFIG}")
-    fi
-    if [[ -n "${BUILD_TESTS}" ]] ; then
-        BUILD_ARGS+=(-DBUILD_TESTS=ON)
-    fi
-    if [[ -n "${ORCA_UPDATER_SIG_KEY}" ]] ; then
-        BUILD_ARGS+=(-DORCA_UPDATER_SIG_KEY="${ORCA_UPDATER_SIG_KEY}")
-    fi
-
-    print_and_run cmake -S . -B $BUILD_DIR "${CMAKE_C_CXX_COMPILER_CLANG[@]}" "${CMAKE_LLD_LINKER_ARGS[@]}" "${CMAKE_CCACHE_ARGS[@]}" -G "Ninja Multi-Config" \
--DSLIC3R_PCH=${SLIC3R_PRECOMPILED_HEADERS} \
--DORCA_TOOLS=ON \
-"${COLORED_OUTPUT}" \
-"${BUILD_ARGS[@]}"
-    echo "done"
-    if [[ -n "${BUILD_ORCA}" ]]; then
-	echo "Building OrcaSlicer ..."
-	print_and_run cmake --build $BUILD_DIR --config "${BUILD_CONFIG}" --target OrcaSlicer
-	echo "Building OrcaSlicer_profile_validator .."
-	print_and_run cmake --build $BUILD_DIR --config "${BUILD_CONFIG}" --target OrcaSlicer_profile_validator
-	./scripts/run_gettext.sh
-    fi
-    if [[ -n "${BUILD_TESTS}" ]] ; then
-	echo "Building tests ..."
-	print_and_run cmake --build ${BUILD_DIR} --config "${BUILD_CONFIG}" --target tests/all
-    fi
-    echo "done"
-fi
-
-if [[ -n "${BUILD_IMAGE}" || -n "${BUILD_ORCA}" ]] ; then
-    pushd $BUILD_DIR > /dev/null
-    build_linux_image="./src/build_linux_image.sh"
-    if [[ -e ${build_linux_image} ]] ; then
-        extra_script_args=""
-        if [[ -n "${BUILD_IMAGE}" ]] ; then
-            extra_script_args="-i"
-        fi
-        print_and_run ${build_linux_image} ${extra_script_args} -R "${BUILD_CONFIG}"
-
-        echo "done"
-    fi
-    popd > /dev/null # build
-fi
-
-elapsed=$SECONDS
-printf "\nBuild completed in %dh %dm %ds\n" $((elapsed/3600)) $((elapsed%3600/60)) $((elapsed%60))
-
-popd > /dev/null # ${SCRIPT_PATH}

build_release.bat

@@ -1,52 +0,0 @@
-set WP=%CD%
-
-set debug=OFF
-set debuginfo=OFF
-if "%1"=="debug" set debug=ON
-if "%2"=="debug" set debug=ON
-if "%1"=="debuginfo" set debuginfo=ON
-if "%2"=="debuginfo" set debuginfo=ON
-if "%debug%"=="ON" (
-    set build_type=Debug
-    set build_dir=build-dbg
-) else (
-    if "%debuginfo%"=="ON" (
-        set build_type=RelWithDebInfo
-        set build_dir=build-dbginfo
-    ) else (
-        set build_type=Release
-        set build_dir=build
-    )
-)
-echo build type set to %build_type%
-
-cd deps
-mkdir %build_dir%
-cd %build_dir%
-set DEPS=%CD%/OrcaSlicer_dep
-set "SIG_FLAG="
-if defined ORCA_UPDATER_SIG_KEY set "SIG_FLAG=-DORCA_UPDATER_SIG_KEY=%ORCA_UPDATER_SIG_KEY%"
-if "%1"=="slicer" (
-    GOTO :slicer
-)
-echo "building deps.."
-
-echo cmake ../ -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type%
-cmake ../ -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type%
-cmake --build . --config %build_type% --target deps -- -m
-
-if "%1"=="deps" exit /b 0
-
-:slicer
-echo "building Orca Slicer..."
-cd %WP%
-mkdir %build_dir%
-cd %build_dir%
-
-echo cmake .. -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type%
-cmake .. -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type% %SIG_FLAG%
-cmake --build . --config %build_type% --target ALL_BUILD -- -m
-cd ..
-call scripts/run_gettext.bat
-cd %build_dir%
-cmake --build . --target install --config %build_type%

build_release_macos.sh

@@ -1,348 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o pipefail
-SECONDS=0
-
-while getopts ":dpa:snt:xbc:i:1Tuh" opt; do
-  case "${opt}" in
-    d )
-        export BUILD_TARGET="deps"
-        ;;
-    p )
-        export PACK_DEPS="1"
-        ;;
-    a )
-        export ARCH="$OPTARG"
-        ;;
-    s )
-        export BUILD_TARGET="slicer"
-        ;;
-    n )
-        export NIGHTLY_BUILD="1"
-        ;;
-    t )
-        export OSX_DEPLOYMENT_TARGET="$OPTARG"
-        ;;
-    x )
-        export SLICER_CMAKE_GENERATOR="Ninja Multi-Config"
-        export SLICER_BUILD_TARGET="all"
-        export DEPS_CMAKE_GENERATOR="Ninja"
-        ;;
-    b )
-        export BUILD_ONLY="1"
-        ;;
-    c )
-        export BUILD_CONFIG="$OPTARG"
-        ;;
-    i )
-        export CMAKE_IGNORE_PREFIX_PATH="${CMAKE_IGNORE_PREFIX_PATH:+$CMAKE_IGNORE_PREFIX_PATH;}$OPTARG"
-        ;;
-    1 )
-        export CMAKE_BUILD_PARALLEL_LEVEL=1
-        ;;
-    T )
-        export BUILD_TESTS="1"
-        ;;
-    u )
-        export BUILD_TARGET="universal"
-        ;;
-    h ) echo "Usage: ./build_release_macos.sh [-d]"
-        echo "   -d: Build deps only"
-        echo "   -a: Set ARCHITECTURE (arm64 or x86_64 or universal)"
-        echo "   -s: Build slicer only"
-        echo "   -u: Build universal app only (requires existing arm64 and x86_64 app bundles)"
-        echo "   -n: Nightly build"
-        echo "   -t: Specify minimum version of the target platform, default is 11.3"
-        echo "   -x: Use Ninja Multi-Config CMake generator, default is Xcode"
-        echo "   -b: Build without reconfiguring CMake"
-        echo "   -c: Set CMake build configuration, default is Release"
-        echo "   -i: Add a prefix to ignore during CMake dependency discovery (repeatable), defaults to /opt/local:/usr/local:/opt/homebrew"
-        echo "   -1: Use single job for building"
-        echo "   -T: Build and run tests"
-        exit 0
-        ;;
-    * )
-        ;;
-  esac
-done
-
-# Set defaults
-
-if [ -z "$ARCH" ]; then
-    ARCH="$(uname -m)"
-    export ARCH
-fi
-
-if [ -z "$BUILD_CONFIG" ]; then
-  export BUILD_CONFIG="Release"
-fi
-
-if [ -z "$BUILD_TARGET" ]; then
-  export BUILD_TARGET="all"
-fi
-
-if [ -z "$SLICER_CMAKE_GENERATOR" ]; then
-  export SLICER_CMAKE_GENERATOR="Xcode"
-fi
-
-if [ -z "$SLICER_BUILD_TARGET" ]; then
-  export SLICER_BUILD_TARGET="ALL_BUILD"
-fi
-
-if [ -z "$DEPS_CMAKE_GENERATOR" ]; then
-  export DEPS_CMAKE_GENERATOR="Unix Makefiles"
-fi
-
-if [ -z "$OSX_DEPLOYMENT_TARGET" ]; then
-  export OSX_DEPLOYMENT_TARGET="11.3"
-fi
-
-if [ -z "$CMAKE_IGNORE_PREFIX_PATH" ]; then
-  export CMAKE_IGNORE_PREFIX_PATH="/opt/local:/usr/local:/opt/homebrew"
-fi
-
-CMAKE_VERSION=$(cmake --version | head -1 | sed 's/[^0-9]*\([0-9]*\).*/\1/')
-if [ "$CMAKE_VERSION" -ge 4 ] 2>/dev/null; then
-  export CMAKE_POLICY_VERSION_MINIMUM=3.5
-  export CMAKE_POLICY_COMPAT="-DCMAKE_POLICY_VERSION_MINIMUM=3.5"
-  echo "Detected CMake 4.x, adding compatibility flag (env + cmake arg)"
-else
-  export CMAKE_POLICY_COMPAT=""
-fi
-
-echo "Build params:"
-echo " - ARCH: $ARCH"
-echo " - BUILD_CONFIG: $BUILD_CONFIG"
-echo " - BUILD_TARGET: $BUILD_TARGET"
-echo " - CMAKE_GENERATOR: $SLICER_CMAKE_GENERATOR for Slicer, $DEPS_CMAKE_GENERATOR for deps"
-echo " - OSX_DEPLOYMENT_TARGET: $OSX_DEPLOYMENT_TARGET"
-echo " - CMAKE_IGNORE_PREFIX_PATH: $CMAKE_IGNORE_PREFIX_PATH"
-echo
-
-# if which -s brew; then
-# 	brew --prefix libiconv
-# 	brew --prefix zstd
-# 	export LIBRARY_PATH=$LIBRARY_PATH:$(brew --prefix zstd)/lib/
-# elif which -s port; then
-# 	port install libiconv
-# 	port install zstd
-# 	export LIBRARY_PATH=$LIBRARY_PATH:/opt/local/lib
-# else
-# 	echo "Need either brew or macports to successfully build deps"
-# 	exit 1
-# fi
-
-PROJECT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-PROJECT_BUILD_DIR="$PROJECT_DIR/build/$ARCH"
-DEPS_DIR="$PROJECT_DIR/deps"
-
-# For Multi-config generators like Ninja and Xcode
-export BUILD_DIR_CONFIG_SUBDIR="/$BUILD_CONFIG"
-
-function build_deps() {
-    # iterate over two architectures: x86_64 and arm64
-    for _ARCH in x86_64 arm64; do
-        # if ARCH is universal or equal to _ARCH
-        if [ "$ARCH" == "universal" ] || [ "$ARCH" == "$_ARCH" ]; then
-
-            PROJECT_BUILD_DIR="$PROJECT_DIR/build/$_ARCH"
-            DEPS_BUILD_DIR="$DEPS_DIR/build/$_ARCH"
-            DEPS="$DEPS_BUILD_DIR/OrcaSlicer_dep"
-
-            echo "Building deps..."
-            (
-                set -x
-                mkdir -p "$DEPS"
-                cd "$DEPS_BUILD_DIR"
-                if [ "1." != "$BUILD_ONLY". ]; then
-                    cmake "${DEPS_DIR}" \
-                        -G "${DEPS_CMAKE_GENERATOR}" \
-                        -DCMAKE_BUILD_TYPE="$BUILD_CONFIG" \
-                        -DCMAKE_OSX_ARCHITECTURES:STRING="${_ARCH}" \
-                        -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}" \
-                        -DCMAKE_IGNORE_PREFIX_PATH="${CMAKE_IGNORE_PREFIX_PATH}" \
-                        ${CMAKE_POLICY_COMPAT}
-                fi
-                cmake --build . --config "$BUILD_CONFIG" --target deps
-            )
-        fi
-    done
-}
-
-function pack_deps() {
-    echo "Packing deps..."
-    (
-        set -x
-        cd "$DEPS_DIR"
-        tar -zcvf "OrcaSlicer_dep_mac_${ARCH}_$(date +"%Y%m%d").tar.gz" "build"
-    )
-}
-
-function build_slicer() {
-    # iterate over two architectures: x86_64 and arm64
-    for _ARCH in x86_64 arm64; do
-        # if ARCH is universal or equal to _ARCH
-        if [ "$ARCH" == "universal" ] || [ "$ARCH" == "$_ARCH" ]; then
-
-            PROJECT_BUILD_DIR="$PROJECT_DIR/build/$_ARCH"
-            DEPS_BUILD_DIR="$DEPS_DIR/build/$_ARCH"
-            DEPS="$DEPS_BUILD_DIR/OrcaSlicer_dep"
-
-            echo "Building slicer for $_ARCH..."
-            (
-                set -x
-            mkdir -p "$PROJECT_BUILD_DIR"
-            cd "$PROJECT_BUILD_DIR"
-            if [ "1." != "$BUILD_ONLY". ]; then
-                cmake "${PROJECT_DIR}" \
-                    -G "${SLICER_CMAKE_GENERATOR}" \
-                    -DORCA_TOOLS=ON \
-                    ${ORCA_UPDATER_SIG_KEY:+-DORCA_UPDATER_SIG_KEY="$ORCA_UPDATER_SIG_KEY"} \
-                    ${BUILD_TESTS:+-DBUILD_TESTS=ON} \
-                    -DCMAKE_BUILD_TYPE="$BUILD_CONFIG" \
-                    -DCMAKE_OSX_ARCHITECTURES="${_ARCH}" \
-                    -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}" \
-                    -DCMAKE_IGNORE_PREFIX_PATH="${CMAKE_IGNORE_PREFIX_PATH}" \
-                    ${CMAKE_POLICY_COMPAT}
-            fi
-            cmake --build . --config "$BUILD_CONFIG" --target "$SLICER_BUILD_TARGET"
-        )
-
-        if [ "1." == "$BUILD_TESTS". ]; then
-            echo "Running tests for $_ARCH..."
-            (
-                set -x
-                cd "$PROJECT_BUILD_DIR"
-                ctest --build-config "$BUILD_CONFIG" --output-on-failure
-            )
-        fi
-
-        echo "Verify localization with gettext..."
-        (
-            cd "$PROJECT_DIR"
-            ./scripts/run_gettext.sh
-        )
-
-        echo "Fix macOS app package..."
-        (
-            cd "$PROJECT_BUILD_DIR"
-            mkdir -p OrcaSlicer
-            cd OrcaSlicer
-            # remove previously built app
-            rm -rf ./OrcaSlicer.app
-            # fully copy newly built app
-            cp -pR "../src$BUILD_DIR_CONFIG_SUBDIR/OrcaSlicer.app" ./OrcaSlicer.app
-            # fix resources
-            resources_path=$(readlink ./OrcaSlicer.app/Contents/Resources)
-            rm ./OrcaSlicer.app/Contents/Resources
-            cp -R "$resources_path" ./OrcaSlicer.app/Contents/Resources
-            # delete .DS_Store file
-            find ./OrcaSlicer.app/ -name '.DS_Store' -delete
-            
-            # Copy OrcaSlicer_profile_validator.app if it exists
-            if [ -f "../src$BUILD_DIR_CONFIG_SUBDIR/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ]; then
-                echo "Copying OrcaSlicer_profile_validator.app..."
-                rm -rf ./OrcaSlicer_profile_validator.app
-                cp -pR "../src$BUILD_DIR_CONFIG_SUBDIR/OrcaSlicer_profile_validator.app" ./OrcaSlicer_profile_validator.app
-                # delete .DS_Store file
-                find ./OrcaSlicer_profile_validator.app/ -name '.DS_Store' -delete
-            fi
-        )
-
-        # extract version
-        # export ver=$(grep '^#define SoftFever_VERSION' ../src/libslic3r/libslic3r_version.h | cut -d ' ' -f3)
-        # ver="_V${ver//\"}"
-        # echo $PWD
-        # if [ "1." != "$NIGHTLY_BUILD". ];
-        # then
-        #     ver=${ver}_dev
-        # fi
-
-        # zip -FSr OrcaSlicer${ver}_Mac_${_ARCH}.zip OrcaSlicer.app
-
-    fi
-    done
-}
-
-function lipo_dir() {
-    local universal_dir="$1"
-    local x86_64_dir="$2"
-
-    # Find all Mach-O files in the universal (arm64-based) copy and lipo them
-    while IFS= read -r -d '' f; do
-        local rel="${f#"$universal_dir"/}"
-        local x86="$x86_64_dir/$rel"
-        if [ -f "$x86" ]; then
-            echo "  lipo: $rel"
-            lipo -create "$f" "$x86" -output "$f.tmp"
-            mv "$f.tmp" "$f"
-        else
-            echo "  warning: no x86_64 counterpart for $rel, keeping arm64 only"
-        fi
-    done < <(find "$universal_dir" -type f -print0 | while IFS= read -r -d '' candidate; do
-        if file "$candidate" | grep -q "Mach-O"; then
-            printf '%s\0' "$candidate"
-        fi
-    done)
-}
-
-function build_universal() {
-    echo "Building universal binary..."
-
-    PROJECT_BUILD_DIR="$PROJECT_DIR/build/$ARCH"
-    ARM64_APP="$PROJECT_DIR/build/arm64/OrcaSlicer/OrcaSlicer.app"
-    X86_64_APP="$PROJECT_DIR/build/x86_64/OrcaSlicer/OrcaSlicer.app"
-
-    mkdir -p "$PROJECT_BUILD_DIR/OrcaSlicer"
-    UNIVERSAL_APP="$PROJECT_BUILD_DIR/OrcaSlicer/OrcaSlicer.app"
-    rm -rf "$UNIVERSAL_APP"
-    cp -R "$ARM64_APP" "$UNIVERSAL_APP"
-
-    echo "Creating universal binaries for OrcaSlicer.app..."
-    lipo_dir "$UNIVERSAL_APP" "$X86_64_APP"
-    echo "Universal OrcaSlicer.app created at $UNIVERSAL_APP"
-
-    # Create universal binary for profile validator if it exists
-    ARM64_VALIDATOR="$PROJECT_DIR/build/arm64/OrcaSlicer/OrcaSlicer_profile_validator.app"
-    X86_64_VALIDATOR="$PROJECT_DIR/build/x86_64/OrcaSlicer/OrcaSlicer_profile_validator.app"
-    if [ -d "$ARM64_VALIDATOR" ] && [ -d "$X86_64_VALIDATOR" ]; then
-        echo "Creating universal binaries for OrcaSlicer_profile_validator.app..."
-        UNIVERSAL_VALIDATOR_APP="$PROJECT_BUILD_DIR/OrcaSlicer/OrcaSlicer_profile_validator.app"
-        rm -rf "$UNIVERSAL_VALIDATOR_APP"
-        cp -R "$ARM64_VALIDATOR" "$UNIVERSAL_VALIDATOR_APP"
-        lipo_dir "$UNIVERSAL_VALIDATOR_APP" "$X86_64_VALIDATOR"
-        echo "Universal OrcaSlicer_profile_validator.app created at $UNIVERSAL_VALIDATOR_APP"
-    fi
-}
-
-case "${BUILD_TARGET}" in
-    all)
-        build_deps
-        build_slicer
-        ;;
-    deps)
-        build_deps
-        ;;
-    slicer)
-        build_slicer
-        ;;
-    universal)
-        build_universal
-        ;;
-    *)
-        echo "Unknown target: $BUILD_TARGET. Available targets: deps, slicer, universal, all."
-        exit 1
-        ;;
-esac
-
-if [ "$ARCH" = "universal" ] && { [ "$BUILD_TARGET" = "all" ] || [ "$BUILD_TARGET" = "slicer" ]; }; then
-    build_universal
-fi
-
-if [ "1." == "$PACK_DEPS". ]; then
-    pack_deps
-fi
-
-elapsed=$SECONDS
-printf "\nBuild completed in %dh %dm %ds\n" $((elapsed/3600)) $((elapsed%3600/60)) $((elapsed%60))

build_release_vs.bat

@@ -1,158 +0,0 @@
-@REM OrcaSlicer build script for Windows with VS auto-detect
-@echo off
-set WP=%CD%
-set _START_TIME=%TIME%
-
-@REM Check for Ninja Multi-Config option (-x)
-set USE_NINJA=0
-for %%a in (%*) do (
-    if "%%a"=="-x" set USE_NINJA=1
-)
-
-if "%USE_NINJA%"=="1" (
-    echo Using Ninja Multi-Config generator
-    set CMAKE_GENERATOR="Ninja Multi-Config"
-    set VS_VERSION=Ninja
-    goto :generator_ready
-)
-
-@REM Detect Visual Studio version using msbuild
-echo Detecting Visual Studio version using msbuild...
-
-@REM Try to get MSBuild version - the output format varies by VS version
-set VS_MAJOR=
-for /f "tokens=*" %%i in ('msbuild -version 2^>^&1 ^| findstr /r "^[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*"') do (
-    for /f "tokens=1 delims=." %%a in ("%%i") do set VS_MAJOR=%%a
-    set MSBUILD_OUTPUT=%%i
-    goto :version_found
-)
-
-@REM Alternative method for newer MSBuild versions
-if "%VS_MAJOR%"=="" (
-    for /f "tokens=*" %%i in ('msbuild -version 2^>^&1 ^| findstr /r "[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*"') do (
-        for /f "tokens=1 delims=." %%a in ("%%i") do set VS_MAJOR=%%a
-        set MSBUILD_OUTPUT=%%i
-        goto :version_found
-    )
-)
-
-:version_found
-echo MSBuild version detected: %MSBUILD_OUTPUT%
-echo Major version: %VS_MAJOR%
-
-if "%VS_MAJOR%"=="" (
-    echo Error: Could not determine Visual Studio version from msbuild
-    echo Please ensure Visual Studio and MSBuild are properly installed
-    exit /b 1
-)
-
-if "%VS_MAJOR%"=="16" (
-    set VS_VERSION=2019
-    set CMAKE_GENERATOR="Visual Studio 16 2019"
-) else if "%VS_MAJOR%"=="17" (
-    set VS_VERSION=2022
-    set CMAKE_GENERATOR="Visual Studio 17 2022"
-) else if "%VS_MAJOR%"=="18" (
-    set VS_VERSION=2026
-    set CMAKE_GENERATOR="Visual Studio 18 2026"
-) else (
-    echo Error: Unsupported Visual Studio version: %VS_MAJOR%
-    echo Supported versions: VS2019 (16.x^), VS2022 (17.x^), VS2026 (18.x^)
-    exit /b 1
-)
-
-echo Detected Visual Studio %VS_VERSION% (version %VS_MAJOR%)
-echo Using CMake generator: %CMAKE_GENERATOR%
-
-:generator_ready
-
-@REM Pack deps
-if "%1"=="pack" (
-    setlocal ENABLEDELAYEDEXPANSION 
-    cd %WP%/deps/build
-    for /f "tokens=2-4 delims=/ " %%a in ('date /t') do set build_date=%%c%%b%%a
-    echo packing deps: OrcaSlicer_dep_win64_!build_date!_vs!VS_VERSION!.zip
-
-    %WP%/tools/7z.exe a OrcaSlicer_dep_win64_!build_date!_vs!VS_VERSION!.zip OrcaSlicer_dep
-    goto :done
-)
-
-set debug=OFF
-set debuginfo=OFF
-if "%1"=="debug" set debug=ON
-if "%2"=="debug" set debug=ON
-if "%1"=="debuginfo" set debuginfo=ON
-if "%2"=="debuginfo" set debuginfo=ON
-if "%debug%"=="ON" (
-    set build_type=Debug
-    set build_dir=build-dbg
-) else (
-    if "%debuginfo%"=="ON" (
-        set build_type=RelWithDebInfo
-        set build_dir=build-dbginfo
-    ) else (
-        set build_type=Release
-        set build_dir=build
-    )
-)
-echo build type set to %build_type%
-
-setlocal DISABLEDELAYEDEXPANSION 
-cd deps
-mkdir %build_dir%
-cd %build_dir%
-set "SIG_FLAG="
-if defined ORCA_UPDATER_SIG_KEY set "SIG_FLAG=-DORCA_UPDATER_SIG_KEY=%ORCA_UPDATER_SIG_KEY%"
-
-if "%1"=="slicer" (
-    GOTO :slicer
-)
-echo "building deps.."
-
-echo on
-REM Set minimum CMake policy to avoid <3.5 errors
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-if "%USE_NINJA%"=="1" (
-    cmake ../ -G %CMAKE_GENERATOR% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target deps
-) else (
-    cmake ../ -G %CMAKE_GENERATOR% -A x64 -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target deps -- -m
-)
-@echo off
-
-if "%1"=="deps" goto :done
-
-:slicer
-echo "building Orca Slicer..."
-cd %WP%
-mkdir %build_dir%
-cd %build_dir%
-
-echo on
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-if "%USE_NINJA%"=="1" (
-    cmake .. -G %CMAKE_GENERATOR% -DORCA_TOOLS=ON %SIG_FLAG% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target ALL_BUILD
-) else (
-    cmake .. -G %CMAKE_GENERATOR% -A x64 -DORCA_TOOLS=ON %SIG_FLAG% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target ALL_BUILD -- -m
-)
-@echo off
-cd ..
-call scripts/run_gettext.bat
-cd %build_dir%
-cmake --build . --target install --config %build_type%
-
-:done
-@echo off
-for /f "tokens=1-3 delims=:.," %%a in ("%_START_TIME: =0%") do set /a "_start_s=%%a*3600+%%b*60+%%c"
-for /f "tokens=1-3 delims=:.," %%a in ("%TIME: =0%") do set /a "_end_s=%%a*3600+%%b*60+%%c"
-set /a "_elapsed=_end_s - _start_s"
-if %_elapsed% lss 0 set /a "_elapsed+=86400"
-set /a "_hours=_elapsed / 3600"
-set /a "_remainder=_elapsed - _hours * 3600"
-set /a "_mins=_remainder / 60"
-set /a "_secs=_remainder - _mins * 60"
-echo.
-echo Build completed in %_hours%h %_mins%m %_secs%s

build_release_vs2022.bat

@@ -1,71 +0,0 @@
-@REM OrcaSlicer build script for Windows
-@echo off
-set WP=%CD%
-
-@REM Pack deps
-if "%1"=="pack" (
-    setlocal ENABLEDELAYEDEXPANSION 
-    cd %WP%/deps/build
-    for /f "tokens=2-4 delims=/ " %%a in ('date /t') do set build_date=%%c%%b%%a
-    echo packing deps: OrcaSlicer_dep_win64_!build_date!_vs2022.zip
-
-    %WP%/tools/7z.exe a OrcaSlicer_dep_win64_!build_date!_vs2022.zip OrcaSlicer_dep
-    exit /b 0
-)
-
-set debug=OFF
-set debuginfo=OFF
-if "%1"=="debug" set debug=ON
-if "%2"=="debug" set debug=ON
-if "%1"=="debuginfo" set debuginfo=ON
-if "%2"=="debuginfo" set debuginfo=ON
-if "%debug%"=="ON" (
-    set build_type=Debug
-    set build_dir=build-dbg
-) else (
-    if "%debuginfo%"=="ON" (
-        set build_type=RelWithDebInfo
-        set build_dir=build-dbginfo
-    ) else (
-        set build_type=Release
-        set build_dir=build
-    )
-)
-echo build type set to %build_type%
-
-setlocal DISABLEDELAYEDEXPANSION 
-cd deps
-mkdir %build_dir%
-cd %build_dir%
-set "SIG_FLAG="
-if defined ORCA_UPDATER_SIG_KEY set "SIG_FLAG=-DORCA_UPDATER_SIG_KEY=%ORCA_UPDATER_SIG_KEY%"
-
-if "%1"=="slicer" (
-    GOTO :slicer
-)
-echo "building deps.."
-
-echo on
-REM Set minimum CMake policy to avoid <3.5 errors
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-cmake ../ -G "Visual Studio 17 2022" -A x64 -DCMAKE_BUILD_TYPE=%build_type%
-cmake --build . --config %build_type% --target deps -- -m
-@echo off
-
-if "%1"=="deps" exit /b 0
-
-:slicer
-echo "building Orca Slicer..."
-cd %WP%
-mkdir %build_dir%
-cd %build_dir%
-
-echo on
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-cmake .. -G "Visual Studio 17 2022" -A x64 -DORCA_TOOLS=ON %SIG_FLAG% -DCMAKE_BUILD_TYPE=%build_type%
-cmake --build . --config %build_type% --target ALL_BUILD -- -m
-@echo off
-cd ..
-call scripts/run_gettext.bat
-cd %build_dir%
-cmake --build . --target install --config %build_type%

cmake/modules/CheckAtomic.cmake

@@ -1,106 +0,0 @@
-# atomic builtins are required for threading support.
-
-INCLUDE(CheckCXXSourceCompiles)
-INCLUDE(CheckLibraryExists)
-
-# Sometimes linking against libatomic is required for atomic ops, if
-# the platform doesn't support lock-free atomics.
-
-function(check_working_cxx_atomics varname)
-  set(OLD_CMAKE_REQUIRED_FLAGS ${CMAKE_REQUIRED_FLAGS})
-  set(CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS} -std=c++11")
-  CHECK_CXX_SOURCE_COMPILES("
-#include <atomic>
-std::atomic<int> x;
-int main() {
-  return x;
-}
-" ${varname})
-  set(CMAKE_REQUIRED_FLAGS ${OLD_CMAKE_REQUIRED_FLAGS})
-endfunction(check_working_cxx_atomics)
-
-function(check_working_cxx_atomics64 varname)
-  set(OLD_CMAKE_REQUIRED_FLAGS ${CMAKE_REQUIRED_FLAGS})
-  set(CMAKE_REQUIRED_FLAGS "-std=c++11 ${CMAKE_REQUIRED_FLAGS}")
-  CHECK_CXX_SOURCE_COMPILES("
-#include <atomic>
-#include <cstdint>
-std::atomic<uint64_t> x (0);
-int main() {
-  uint64_t i = x.load(std::memory_order_relaxed);
-  return 0;
-}
-" ${varname})
-  set(CMAKE_REQUIRED_FLAGS ${OLD_CMAKE_REQUIRED_FLAGS})
-endfunction(check_working_cxx_atomics64)
-
-
-# This isn't necessary on MSVC, so avoid command-line switch annoyance
-# by only running on GCC-like hosts.
-if (LLVM_COMPILER_IS_GCC_COMPATIBLE)
-  # First check if atomics work without the library.
-  check_working_cxx_atomics(HAVE_CXX_ATOMICS_WITHOUT_LIB)
-  # If not, check if the library exists, and atomics work with it.
-  if(NOT HAVE_CXX_ATOMICS_WITHOUT_LIB)
-    check_library_exists(atomic __atomic_fetch_add_4 "" HAVE_LIBATOMIC)
-    if( HAVE_LIBATOMIC )
-      list(APPEND CMAKE_REQUIRED_LIBRARIES "atomic")
-      check_working_cxx_atomics(HAVE_CXX_ATOMICS_WITH_LIB)
-      if (NOT HAVE_CXX_ATOMICS_WITH_LIB)
-	message(FATAL_ERROR "Host compiler must support std::atomic!")
-      endif()
-    else()
-      message(FATAL_ERROR "Host compiler appears to require libatomic, but cannot find it.")
-    endif()
-  endif()
-endif()
-
-# Check for 64 bit atomic operations.
-if(MSVC)
-  set(HAVE_CXX_ATOMICS64_WITHOUT_LIB True)
-else()
-  check_working_cxx_atomics64(HAVE_CXX_ATOMICS64_WITHOUT_LIB)
-endif()
-
-# If not, check if the library exists, and atomics work with it.
-if(NOT HAVE_CXX_ATOMICS64_WITHOUT_LIB)
-  check_library_exists(atomic __atomic_load_8 "" HAVE_CXX_LIBATOMICS64)
-  if(HAVE_CXX_LIBATOMICS64)
-    list(APPEND CMAKE_REQUIRED_LIBRARIES "atomic")
-    check_working_cxx_atomics64(HAVE_CXX_ATOMICS64_WITH_LIB)
-    if (NOT HAVE_CXX_ATOMICS64_WITH_LIB)
-      message(FATAL_ERROR "Host compiler must support 64-bit std::atomic!")
-    endif()
-  else()
-    message(FATAL_ERROR "Host compiler appears to require libatomic for 64-bit operations, but cannot find it.")
-  endif()
-endif()
-
-## TODO: This define is only used for the legacy atomic operations in
-## llvm's Atomic.h, which should be replaced.  Other code simply
-## assumes C++11 <atomic> works.
-CHECK_CXX_SOURCE_COMPILES("
-#ifdef _MSC_VER
-#include <windows.h>
-#endif
-int main() {
-#ifdef _MSC_VER
-        volatile LONG val = 1;
-        MemoryBarrier();
-        InterlockedCompareExchange(&val, 0, 1);
-        InterlockedIncrement(&val);
-        InterlockedDecrement(&val);
-#else
-        volatile unsigned long val = 1;
-        __sync_synchronize();
-        __sync_val_compare_and_swap(&val, 1, 0);
-        __sync_add_and_fetch(&val, 1);
-        __sync_sub_and_fetch(&val, 1);
-#endif
-        return 0;
-      }
-" LLVM_HAS_ATOMICS)
-
-if( NOT LLVM_HAS_ATOMICS )
-  message(STATUS "Warning: LLVM will be built thread-unsafe because atomic builtins are missing")
-endif()

cmake/modules/FindAlienWx.cmake

@@ -49,7 +49,6 @@ my \$defines      = ' ' . Alien::wxWidgets->defines;
 my \$cflags       = Alien::wxWidgets->c_flags;
 my \$linkflags    = Alien::wxWidgets->link_flags;
 my \$libraries    = ' ' . Alien::wxWidgets->libraries(@components);
-my \$gui_toolkit  = Alien::wxWidgets->config->{toolkit};
 #my @libraries     = Alien::wxWidgets->link_libraries(@components);
 #my @implib        = Alien::wxWidgets->import_libraries(@components);
 #my @shrlib        = Alien::wxWidgets->shared_libraries(@components);
@@ -83,7 +82,6 @@ cmake_set_var('LIBRARIES', \$libraries);
 cmake_set_var('DEFINITIONS', \$defines);
 #cmake_set_var('DEFINITIONS_DEBUG', );
 cmake_set_var('CXX_FLAGS', \$cflags);
-cmake_set_var('GUI_TOOLKIT', \$gui_toolkit);
 close \$fh;
 ")
 include(${AlienWx_TEMP_INCLUDE})
@@ -98,7 +96,6 @@ if (AlienWx_DEBUG)
   message(STATUS "  AlienWx_DEFINITIONS       = ${AlienWx_DEFINITIONS}")
   message(STATUS "  AlienWx_DEFINITIONS_DEBUG = ${AlienWx_DEFINITIONS_DEBUG}")
   message(STATUS "  AlienWx_CXX_FLAGS         = ${AlienWx_CXX_FLAGS}")
-  message(STATUS "  AlienWx_GUI_TOOLKIT       = ${AlienWx_GUI_TOOLKIT}")
 endif()
 
 include(FindPackageHandleStandardArgs)

cmake/modules/FindCURL.cmake

@@ -5,62 +5,34 @@
 # FindCURL
 # --------
 #
+# Find curl
+#
 # Find the native CURL headers and libraries.
 #
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
+# ::
 #
-# This module defines :prop_tgt:`IMPORTED` target ``CURL::libcurl``, if
-# curl has been found.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following variables:
-#
-# ``CURL_FOUND``
-#   True if curl found.
-#
-# ``CURL_INCLUDE_DIRS``
-#   where to find curl/curl.h, etc.
-#
-# ``CURL_LIBRARIES``
-#   List of libraries when using curl.
-#
-# ``CURL_VERSION_STRING``
-#   The version of curl found.
+#   CURL_INCLUDE_DIRS   - where to find curl/curl.h, etc.
+#   CURL_LIBRARIES      - List of libraries when using curl.
+#   CURL_FOUND          - True if curl found.
+#   CURL_VERSION_STRING - the version of curl found (since CMake 2.8.8)
 
 # Look for the header file.
 find_path(CURL_INCLUDE_DIR NAMES curl/curl.h)
 mark_as_advanced(CURL_INCLUDE_DIR)
 
-if(NOT CURL_LIBRARY)
-  # Look for the library (sorted from most current/relevant entry to least).
-  find_library(CURL_LIBRARY_RELEASE NAMES
-      curl
-    # Windows MSVC prebuilts:
-      curllib
-      libcurl_imp
-      curllib_static
-    # Windows older "Win32 - MSVC" prebuilts (libcurl.lib, e.g. libcurl-7.15.5-win32-msvc.zip):
-      libcurl
-    # Static library on Windows
-      libcurl_a
-  )
-  mark_as_advanced(CURL_LIBRARY_RELEASE)
-
-  find_library(CURL_LIBRARY_DEBUG NAMES
-    # Windows MSVC CMake builds in debug configuration on vcpkg:
-      libcurl-d_imp
-      libcurl-d
-    # Static library on Windows, compiled in debug mode
-      libcurl_a_debug
-  )
-  mark_as_advanced(CURL_LIBRARY_DEBUG)
-
-  include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations_SLIC3R.cmake)
-  select_library_configurations_SLIC3R(CURL)
-endif()
+# Look for the library (sorted from most current/relevant entry to least).
+find_library(CURL_LIBRARY NAMES
+    curl
+  # Windows MSVC Makefile:
+    libcurl_a
+  # Windows MSVC prebuilts:
+    curllib
+    libcurl_imp
+    curllib_static
+  # Windows older "Win32 - MSVC" prebuilts (libcurl.lib, e.g. libcurl-7.15.5-win32-msvc.zip):
+    libcurl
+)
+mark_as_advanced(CURL_LIBRARY)
 
 if(CURL_INCLUDE_DIR)
   foreach(_curl_version_header curlver.h curl.h)
@@ -74,8 +46,7 @@ if(CURL_INCLUDE_DIR)
   endforeach()
 endif()
 
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs_SLIC3R.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS_SLIC3R(CURL
+find_package_handle_standard_args(CURL
                                   REQUIRED_VARS CURL_LIBRARY CURL_INCLUDE_DIR
                                   VERSION_VAR CURL_VERSION_STRING)
 
@@ -83,29 +54,6 @@ if(CURL_FOUND)
   set(CURL_LIBRARIES ${CURL_LIBRARY})
   set(CURL_INCLUDE_DIRS ${CURL_INCLUDE_DIR})
 
-  if(NOT TARGET CURL::libcurl)
-    add_library(CURL::libcurl UNKNOWN IMPORTED)
-    set_target_properties(CURL::libcurl PROPERTIES
-      INTERFACE_INCLUDE_DIRECTORIES "${CURL_INCLUDE_DIRS}")
-
-    if(EXISTS "${CURL_LIBRARY}")
-      set_target_properties(CURL::libcurl PROPERTIES
-        IMPORTED_LINK_INTERFACE_LANGUAGES "C"
-        IMPORTED_LOCATION "${CURL_LIBRARY}")
-    endif()
-    if(CURL_LIBRARY_RELEASE)
-      set_property(TARGET CURL::libcurl APPEND PROPERTY
-        IMPORTED_CONFIGURATIONS RELEASE)
-      set_target_properties(CURL::libcurl PROPERTIES
-        IMPORTED_LINK_INTERFACE_LANGUAGES "C"
-        IMPORTED_LOCATION_RELEASE "${CURL_LIBRARY_RELEASE}")
-    endif()
-    if(CURL_LIBRARY_DEBUG)
-      set_property(TARGET CURL::libcurl APPEND PROPERTY
-        IMPORTED_CONFIGURATIONS DEBUG)
-      set_target_properties(CURL::libcurl PROPERTIES
-        IMPORTED_LINK_INTERFACE_LANGUAGES "C"
-        IMPORTED_LOCATION_DEBUG "${CURL_LIBRARY_DEBUG}")
-    endif()
-  endif()
+  message(STATUS "  Curl libraries:        = ${CURL_LIBRARIES}")
+  message(STATUS "  Curl include dirs:     = ${CURL_INCLUDE_DIRS}")
 endif()

cmake/modules/FindDBus.cmake

@@ -1,59 +0,0 @@
-# - Try to find DBus
-# Once done, this will define
-#
-#  DBUS_FOUND - system has DBus
-#  DBUS_INCLUDE_DIRS - the DBus include directories
-#  DBUS_LIBRARIES - link these to use DBus
-#
-# Copyright (C) 2012 Raphael Kubo da Costa <rakuco@webkit.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1.  Redistributions of source code must retain the above copyright
-#     notice, this list of conditions and the following disclaimer.
-# 2.  Redistributions in binary form must reproduce the above copyright
-#     notice, this list of conditions and the following disclaimer in the
-#     documentation and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND ITS CONTRIBUTORS ``AS
-# IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR ITS
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-FIND_PACKAGE(PkgConfig)
-PKG_CHECK_MODULES(PC_DBUS QUIET dbus-1)
-
-FIND_LIBRARY(DBUS_LIBRARIES
-    NAMES dbus-1
-    HINTS ${PC_DBUS_LIBDIR}
-          ${PC_DBUS_LIBRARY_DIRS}
-)
-
-FIND_PATH(DBUS_INCLUDE_DIR
-    NAMES dbus/dbus.h
-    HINTS ${PC_DBUS_INCLUDEDIR}
-          ${PC_DBUS_INCLUDE_DIRS}
-)
-
-GET_FILENAME_COMPONENT(_DBUS_LIBRARY_DIR ${DBUS_LIBRARIES} PATH)
-FIND_PATH(DBUS_ARCH_INCLUDE_DIR
-    NAMES dbus/dbus-arch-deps.h
-    HINTS ${PC_DBUS_INCLUDEDIR}
-          ${PC_DBUS_INCLUDE_DIRS}
-          ${_DBUS_LIBRARY_DIR}
-          ${DBUS_INCLUDE_DIR}
-    PATH_SUFFIXES include
-)
-
-SET(DBUS_INCLUDE_DIRS ${DBUS_INCLUDE_DIR} ${DBUS_ARCH_INCLUDE_DIR})
-
-INCLUDE(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(DBus REQUIRED_VARS DBUS_INCLUDE_DIRS DBUS_LIBRARIES)

cmake/modules/FindDraco.cmake

@@ -1,26 +0,0 @@
-set(_q "")
-if(${CMAKE_FIND_PACKAGE_NAME}_FIND_QUIETLY)
-    set(_q QUIET)
-    set(_quietly TRUE)
-endif()
-find_package(${CMAKE_FIND_PACKAGE_NAME} ${${CMAKE_FIND_PACKAGE_NAME}_FIND_VERSION} CONFIG ${_q})
-
-if (NOT ${CMAKE_FIND_PACKAGE_NAME}_FOUND)
-    include(CheckIncludeFileCXX)
-    add_library(draco INTERFACE)
-    target_include_directories(draco INTERFACE include)
-
-    if (_quietly)
-        set(CMAKE_REQUIRED_QUIET ON)
-    endif()
-    CHECK_INCLUDE_FILE_CXX("draco/draco_features.h" HAVE_DRACO_H)
-
-    if (NOT HAVE_DRACO_H)
-        if (${CMAKE_FIND_PACKAGE_NAME}_FIND_REQUIRED)
-            message(FATAL_ERROR "Draco library not found. Please install the dependency.")
-        elseif(NOT _quietly)
-            message(WARNING "Draco library not found.")
-        endif()
-    endif ()
-endif()
-

cmake/modules/FindEigen3.cmake

@@ -0,0 +1,86 @@
+# - Try to find Eigen3 lib
+#
+# This module supports requiring a minimum version, e.g. you can do
+#   find_package(Eigen3 3.1.2)
+# to require version 3.1.2 or newer of Eigen3.
+#
+# Once done this will define
+#
+#  EIGEN3_FOUND - system has eigen lib with correct version
+#  EIGEN3_INCLUDE_DIR - the eigen include directory
+#  EIGEN3_VERSION - eigen version
+
+# Copyright (c) 2006, 2007 Montel Laurent, <montel@kde.org>
+# Copyright (c) 2008, 2009 Gael Guennebaud, <g.gael@free.fr>
+# Copyright (c) 2009 Benoit Jacob <jacob.benoit.1@gmail.com>
+# Redistribution and use is allowed according to the terms of the 2-clause BSD license.
+
+if(NOT Eigen3_FIND_VERSION)
+  if(NOT Eigen3_FIND_VERSION_MAJOR)
+    set(Eigen3_FIND_VERSION_MAJOR 2)
+  endif(NOT Eigen3_FIND_VERSION_MAJOR)
+  if(NOT Eigen3_FIND_VERSION_MINOR)
+    set(Eigen3_FIND_VERSION_MINOR 91)
+  endif(NOT Eigen3_FIND_VERSION_MINOR)
+  if(NOT Eigen3_FIND_VERSION_PATCH)
+    set(Eigen3_FIND_VERSION_PATCH 0)
+  endif(NOT Eigen3_FIND_VERSION_PATCH)
+
+  set(Eigen3_FIND_VERSION "${Eigen3_FIND_VERSION_MAJOR}.${Eigen3_FIND_VERSION_MINOR}.${Eigen3_FIND_VERSION_PATCH}")
+endif(NOT Eigen3_FIND_VERSION)
+
+macro(_eigen3_check_version)
+  file(READ "${EIGEN3_INCLUDE_DIR}/Eigen/src/Core/util/Macros.h" _eigen3_version_header)
+
+  string(REGEX MATCH "define[ \t]+EIGEN_WORLD_VERSION[ \t]+([0-9]+)" _eigen3_world_version_match "${_eigen3_version_header}")
+  set(EIGEN3_WORLD_VERSION "${CMAKE_MATCH_1}")
+  string(REGEX MATCH "define[ \t]+EIGEN_MAJOR_VERSION[ \t]+([0-9]+)" _eigen3_major_version_match "${_eigen3_version_header}")
+  set(EIGEN3_MAJOR_VERSION "${CMAKE_MATCH_1}")
+  string(REGEX MATCH "define[ \t]+EIGEN_MINOR_VERSION[ \t]+([0-9]+)" _eigen3_minor_version_match "${_eigen3_version_header}")
+  set(EIGEN3_MINOR_VERSION "${CMAKE_MATCH_1}")
+
+  set(EIGEN3_VERSION ${EIGEN3_WORLD_VERSION}.${EIGEN3_MAJOR_VERSION}.${EIGEN3_MINOR_VERSION})
+  if(${EIGEN3_VERSION} VERSION_LESS ${Eigen3_FIND_VERSION})
+    set(EIGEN3_VERSION_OK FALSE)
+  else(${EIGEN3_VERSION} VERSION_LESS ${Eigen3_FIND_VERSION})
+    set(EIGEN3_VERSION_OK TRUE)
+  endif(${EIGEN3_VERSION} VERSION_LESS ${Eigen3_FIND_VERSION})
+
+  if(NOT EIGEN3_VERSION_OK)
+
+    message(STATUS "Eigen3 version ${EIGEN3_VERSION} found in ${EIGEN3_INCLUDE_DIR}, "
+                   "but at least version ${Eigen3_FIND_VERSION} is required")
+  endif(NOT EIGEN3_VERSION_OK)
+endmacro(_eigen3_check_version)
+
+if (EIGEN3_INCLUDE_DIR)
+
+  # in cache already
+  _eigen3_check_version()
+  set(EIGEN3_FOUND ${EIGEN3_VERSION_OK})
+
+else (EIGEN3_INCLUDE_DIR)
+
+  # specific additional paths for some OS
+  if (WIN32)
+    set(EIGEN_ADDITIONAL_SEARCH_PATHS ${EIGEN_ADDITIONAL_SEARCH_PATHS} "C:/Program Files/Eigen/include" "C:/Program Files (x86)/Eigen/include")
+  endif(WIN32)
+
+  find_path(EIGEN3_INCLUDE_DIR NAMES signature_of_eigen3_matrix_library
+      PATHS
+      ${CMAKE_INSTALL_PREFIX}/include
+      ${EIGEN_ADDITIONAL_SEARCH_PATHS}
+      ${KDE4_INCLUDE_DIR}
+      PATH_SUFFIXES eigen3 eigen
+    )
+
+  if(EIGEN3_INCLUDE_DIR)
+    _eigen3_check_version()
+  endif(EIGEN3_INCLUDE_DIR)
+
+  include(FindPackageHandleStandardArgs)
+  find_package_handle_standard_args(Eigen3 DEFAULT_MSG EIGEN3_INCLUDE_DIR EIGEN3_VERSION_OK)
+
+  mark_as_advanced(EIGEN3_INCLUDE_DIR)
+
+endif(EIGEN3_INCLUDE_DIR)

cmake/modules/FindGLEW.cmake

@@ -1,357 +0,0 @@
-# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
-# file Copyright.txt or https://cmake.org/licensing for details.
-
-# PrusaSlicer specifics:
-# This file is backported from CMake 3.15 distribution to behave uniformly
-# across all versions of CMake. It explicitly adds GLEW_STATIC compile 
-# definition to static targets which is needed to prevent link errors.
-
-#[=======================================================================[.rst:
-FindGLEW
---------
-
-Find the OpenGL Extension Wrangler Library (GLEW)
-
-Input Variables
-^^^^^^^^^^^^^^^
-
-The following variables may be set to influence this module’s behavior:
-
-``GLEW_USE_STATIC_LIBS``
-  to find and create :prop_tgt:`IMPORTED` target for static linkage.
-
-``GLEW_VERBOSE``
-  to output a detailed log of this module.
-
-Imported Targets
-^^^^^^^^^^^^^^^^
-
-This module defines the following :ref:`Imported Targets <Imported Targets>`:
-
-
-``GLEW::glew``
-  The GLEW shared library.
-``GLEW::glew_s``
-  The GLEW static library, if ``GLEW_USE_STATIC_LIBS`` is set to ``TRUE``.
-``GLEW::GLEW``
-  Duplicates either ``GLEW::glew`` or ``GLEW::glew_s`` based on availability.
-
-Result Variables
-^^^^^^^^^^^^^^^^
-
-This module defines the following variables:
-
-``GLEW_INCLUDE_DIRS``
-  include directories for GLEW
-``GLEW_LIBRARIES``
-  libraries to link against GLEW
-``GLEW_SHARED_LIBRARIES``
-  libraries to link against shared GLEW
-``GLEW_STATIC_LIBRARIES``
-  libraries to link against static GLEW
-``GLEW_FOUND``
-  true if GLEW has been found and can be used
-``GLEW_VERSION``
-  GLEW version
-``GLEW_VERSION_MAJOR``
-  GLEW major version
-``GLEW_VERSION_MINOR``
-  GLEW minor version
-``GLEW_VERSION_MICRO``
-  GLEW micro version
-
-#]=======================================================================]
-
-include(FindPackageHandleStandardArgs)
-
-
-if(APPLE)
-  find_package(OpenGL QUIET)
-
-  if(OpenGL_FOUND)
-    if(GLEW_VERBOSE)
-      message(STATUS "FindGLEW: Found OpenGL Framework.")
-      message(STATUS "FindGLEW: OPENGL_LIBRARIES: ${OPENGL_LIBRARIES}")
-    endif()
-  else()
-    if(GLEW_VERBOSE)
-      message(STATUS "FindGLEW: could not find GLEW library.")
-    endif()
-    return()
-  endif()
-endif()
-
-
-function(__glew_set_find_library_suffix shared_or_static)
-  if((UNIX AND NOT APPLE) AND "${shared_or_static}" MATCHES "SHARED")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".so")
-  elseif((UNIX AND NOT APPLE) AND "${shared_or_static}" MATCHES "STATIC")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".a")
-  elseif(APPLE AND "${shared_or_static}" MATCHES "SHARED")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".dylib;.so")
-  elseif(APPLE AND "${shared_or_static}" MATCHES "STATIC")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".a")
-  elseif(WIN32 AND "${shared_or_static}" MATCHES "SHARED")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".lib")
-  elseif(WIN32 AND "${shared_or_static}" MATCHES "STATIC")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".lib;.a;.dll.a")
-  endif()
-
-  set(CMAKE_FIND_LIBRARY_SUFFIXES "${CMAKE_FIND_LIBRARY_SUFFIXES}" PARENT_SCOPE)
-  if(GLEW_VERBOSE)
-    message(STATUS "FindGLEW: CMAKE_FIND_LIBRARY_SUFFIXES for ${shared_or_static}: ${CMAKE_FIND_LIBRARY_SUFFIXES}")
-  endif()
-endfunction()
-
-
-if(GLEW_VERBOSE)
-  if(DEFINED GLEW_USE_STATIC_LIBS)
-    message(STATUS "FindGLEW: GLEW_USE_STATIC_LIBS: ${GLEW_USE_STATIC_LIBS}.")
-  else()
-    message(STATUS "FindGLEW: GLEW_USE_STATIC_LIBS is undefined. Treated as FALSE.")
-  endif()
-endif()
-
-find_path(GLEW_INCLUDE_DIR GL/glew.h)
-mark_as_advanced(GLEW_INCLUDE_DIR)
-
-set(GLEW_INCLUDE_DIRS ${GLEW_INCLUDE_DIR})
-
-if(GLEW_VERBOSE)
-  message(STATUS "FindGLEW: GLEW_INCLUDE_DIR: ${GLEW_INCLUDE_DIR}")
-  message(STATUS "FindGLEW: GLEW_INCLUDE_DIRS: ${GLEW_INCLUDE_DIRS}")
-endif()
-
-if("${CMAKE_GENERATOR_PLATFORM}" MATCHES "x64" OR "${CMAKE_GENERATOR}" MATCHES "Win64")
-  set(_arch "x64")
-else()
-  set(_arch "Win32")
-endif()
-
-
-set(__GLEW_CURRENT_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
-
-__glew_set_find_library_suffix(SHARED)
-
-find_library(GLEW_SHARED_LIBRARY_RELEASE
-             NAMES GLEW glew glew32
-             PATH_SUFFIXES lib lib64 libx32 lib/Release/${_arch}
-             PATHS ENV GLEW_ROOT)
-
-find_library(GLEW_SHARED_LIBRARY_DEBUG
-             NAMES GLEWd glewd glew32d
-             PATH_SUFFIXES lib lib64
-             PATHS ENV GLEW_ROOT)
-
-
-__glew_set_find_library_suffix(STATIC)
-
-find_library(GLEW_STATIC_LIBRARY_RELEASE
-             NAMES GLEW glew glew32s
-             PATH_SUFFIXES lib lib64 libx32 lib/Release/${_arch}
-             PATHS ENV GLEW_ROOT)
-
-find_library(GLEW_STATIC_LIBRARY_DEBUG
-             NAMES GLEWds GLEWd glewd glewds glew32ds
-             PATH_SUFFIXES lib lib64
-             PATHS ENV GLEW_ROOT)
-
-set(CMAKE_FIND_LIBRARY_SUFFIXES ${__GLEW_CURRENT_FIND_LIBRARY_SUFFIXES})
-unset(__GLEW_CURRENT_FIND_LIBRARY_SUFFIXES)
-
-include(SelectLibraryConfigurations)
-
-select_library_configurations(GLEW_SHARED)
-select_library_configurations(GLEW_STATIC)
-
-if(NOT GLEW_USE_STATIC_LIBS)
-  set(GLEW_LIBRARIES ${GLEW_SHARED_LIBRARY})
-else()
-  set(GLEW_LIBRARIES ${GLEW_STATIC_LIBRARY})
-endif()
-
-
-if(GLEW_VERBOSE)
-  message(STATUS "FindGLEW: GLEW_SHARED_LIBRARY_RELEASE: ${GLEW_SHARED_LIBRARY_RELEASE}")
-  message(STATUS "FindGLEW: GLEW_STATIC_LIBRARY_RELEASE: ${GLEW_STATIC_LIBRARY_RELEASE}")
-  message(STATUS "FindGLEW: GLEW_SHARED_LIBRARY_DEBUG: ${GLEW_SHARED_LIBRARY_DEBUG}")
-  message(STATUS "FindGLEW: GLEW_STATIC_LIBRARY_DEBUG: ${GLEW_STATIC_LIBRARY_DEBUG}")
-  message(STATUS "FindGLEW: GLEW_SHARED_LIBRARY: ${GLEW_SHARED_LIBRARY}")
-  message(STATUS "FindGLEW: GLEW_STATIC_LIBRARY: ${GLEW_STATIC_LIBRARY}")
-  message(STATUS "FindGLEW: GLEW_LIBRARIES: ${GLEW_LIBRARIES}")
-endif()
-
-
-# Read version from GL/glew.h file
-if(EXISTS "${GLEW_INCLUDE_DIR}/GL/glew.h")
-  file(STRINGS "${GLEW_INCLUDE_DIR}/GL/glew.h" _contents REGEX "^VERSION_.+ [0-9]+")
-  if(_contents)
-    string(REGEX REPLACE ".*VERSION_MAJOR[ \t]+([0-9]+).*" "\\1" GLEW_VERSION_MAJOR "${_contents}")
-    string(REGEX REPLACE ".*VERSION_MINOR[ \t]+([0-9]+).*" "\\1" GLEW_VERSION_MINOR "${_contents}")
-    string(REGEX REPLACE ".*VERSION_MICRO[ \t]+([0-9]+).*" "\\1" GLEW_VERSION_MICRO "${_contents}")
-    set(GLEW_VERSION "${GLEW_VERSION_MAJOR}.${GLEW_VERSION_MINOR}.${GLEW_VERSION_MICRO}")
-  endif()
-endif()
-
-if(GLEW_VERBOSE)
-  message(STATUS "FindGLEW: GLEW_VERSION_MAJOR: ${GLEW_VERSION_MAJOR}")
-  message(STATUS "FindGLEW: GLEW_VERSION_MINOR: ${GLEW_VERSION_MINOR}")
-  message(STATUS "FindGLEW: GLEW_VERSION_MICRO: ${GLEW_VERSION_MICRO}")
-  message(STATUS "FindGLEW: GLEW_VERSION: ${GLEW_VERSION}")
-endif()
-
-find_package_handle_standard_args(GLEW
-                                  REQUIRED_VARS GLEW_INCLUDE_DIRS GLEW_LIBRARIES
-                                  VERSION_VAR GLEW_VERSION)
-
-if(NOT GLEW_FOUND)
-  if(GLEW_VERBOSE)
-    message(STATUS "FindGLEW: could not find GLEW library.")
-  endif()
-  return()
-endif()
-
-
-if(NOT TARGET GLEW::glew AND NOT GLEW_USE_STATIC_LIBS)
-  if(GLEW_VERBOSE)
-    message(STATUS "FindGLEW: Creating GLEW::glew imported target.")
-  endif()
-
-  add_library(GLEW::glew UNKNOWN IMPORTED)
-
-  set_target_properties(GLEW::glew
-                        PROPERTIES INTERFACE_INCLUDE_DIRECTORIES "${GLEW_INCLUDE_DIRS}")
-
-  if(APPLE)
-    if(CMAKE_VERSION VERSION_GREATER_EQUAL "4.0")
-      set_target_properties(GLEW::glew
-                            PROPERTIES INTERFACE_LINK_LIBRARIES "-framework OpenGL")
-    else()
-      set_target_properties(GLEW::glew
-                            PROPERTIES INTERFACE_LINK_LIBRARIES OpenGL::GL)
-    endif()
-  endif()
-
-  if(GLEW_SHARED_LIBRARY_RELEASE)
-    set_property(TARGET GLEW::glew
-                 APPEND
-                 PROPERTY IMPORTED_CONFIGURATIONS RELEASE)
-
-    set_target_properties(GLEW::glew
-                          PROPERTIES IMPORTED_LOCATION_RELEASE "${GLEW_SHARED_LIBRARY_RELEASE}")
-  endif()
-
-  if(GLEW_SHARED_LIBRARY_DEBUG)
-    set_property(TARGET GLEW::glew
-                 APPEND
-                 PROPERTY IMPORTED_CONFIGURATIONS DEBUG)
-
-    set_target_properties(GLEW::glew
-                          PROPERTIES IMPORTED_LOCATION_DEBUG "${GLEW_SHARED_LIBRARY_DEBUG}")
-  endif()
-
-elseif(NOT TARGET GLEW::glew_s AND GLEW_USE_STATIC_LIBS)
-  if(GLEW_VERBOSE)
-    message(STATUS "FindGLEW: Creating GLEW::glew_s imported target.")
-  endif()
-
-  add_library(GLEW::glew_s UNKNOWN IMPORTED)
-
-  set_target_properties(GLEW::glew_s
-                        PROPERTIES INTERFACE_INCLUDE_DIRECTORIES "${GLEW_INCLUDE_DIRS}")
-
-  set_target_properties(GLEW::glew_s PROPERTIES INTERFACE_COMPILE_DEFINITIONS GLEW_STATIC)
-
-  if(APPLE)
-    if(CMAKE_VERSION VERSION_GREATER_EQUAL "4.0")
-      set_target_properties(GLEW::glew_s
-                            PROPERTIES INTERFACE_LINK_LIBRARIES "-framework OpenGL")
-    else()
-      set_target_properties(GLEW::glew_s
-                            PROPERTIES INTERFACE_LINK_LIBRARIES OpenGL::GL)
-    endif()
-  endif()
-
-  if(GLEW_STATIC_LIBRARY_RELEASE)
-    set_property(TARGET GLEW::glew_s
-                 APPEND
-                 PROPERTY IMPORTED_CONFIGURATIONS RELEASE)
-
-    set_target_properties(GLEW::glew_s
-                          PROPERTIES IMPORTED_LOCATION_RELEASE "${GLEW_STATIC_LIBRARY_RELEASE}")
-  endif()
-
-  if(GLEW_STATIC_LIBRARY_DEBUG)
-    set_property(TARGET GLEW::glew_s
-                 APPEND
-                 PROPERTY IMPORTED_CONFIGURATIONS DEBUG)
-
-    set_target_properties(GLEW::glew_s
-                          PROPERTIES IMPORTED_LOCATION_DEBUG "${GLEW_STATIC_LIBRARY_DEBUG}")
-  endif()
-endif()
-
-if(NOT TARGET GLEW::GLEW)
-  if(GLEW_VERBOSE)
-    message(STATUS "FindGLEW: Creating GLEW::GLEW imported target.")
-  endif()
-
-  add_library(GLEW::GLEW UNKNOWN IMPORTED)
-
-  set_target_properties(GLEW::GLEW
-                        PROPERTIES INTERFACE_INCLUDE_DIRECTORIES "${GLEW_INCLUDE_DIRS}")
-
-  if(APPLE)
-    if(CMAKE_VERSION VERSION_GREATER_EQUAL "4.0")
-      set_target_properties(GLEW::GLEW
-                            PROPERTIES INTERFACE_LINK_LIBRARIES "-framework OpenGL")
-    else()
-      set_target_properties(GLEW::GLEW
-                            PROPERTIES INTERFACE_LINK_LIBRARIES OpenGL::GL)
-    endif()
-  endif()
-
-  if(TARGET GLEW::glew)
-    if(GLEW_SHARED_LIBRARY_RELEASE)
-      set_property(TARGET GLEW::GLEW
-                   APPEND
-                   PROPERTY IMPORTED_CONFIGURATIONS RELEASE)
-
-      set_target_properties(GLEW::GLEW
-                            PROPERTIES IMPORTED_LOCATION_RELEASE "${GLEW_SHARED_LIBRARY_RELEASE}")
-    endif()
-
-    if(GLEW_SHARED_LIBRARY_DEBUG)
-      set_property(TARGET GLEW::GLEW
-                   APPEND
-                   PROPERTY IMPORTED_CONFIGURATIONS DEBUG)
-
-      set_target_properties(GLEW::GLEW
-                            PROPERTIES IMPORTED_LOCATION_DEBUG "${GLEW_SHARED_LIBRARY_DEBUG}")
-    endif()
-
-  elseif(TARGET GLEW::glew_s)
-    if(GLEW_STATIC_LIBRARY_RELEASE)
-      set_property(TARGET GLEW::GLEW
-                   APPEND
-                   PROPERTY IMPORTED_CONFIGURATIONS RELEASE)
-
-      set_target_properties(GLEW::GLEW
-                            PROPERTIES IMPORTED_LOCATION_RELEASE "${GLEW_STATIC_LIBRARY_RELEASE}"
-                                       INTERFACE_COMPILE_DEFINITIONS GLEW_STATIC)
-    endif()
-
-    if(GLEW_STATIC_LIBRARY_DEBUG AND GLEW_USE_STATIC_LIBS)
-      set_property(TARGET GLEW::GLEW
-                   APPEND
-                   PROPERTY IMPORTED_CONFIGURATIONS DEBUG)
-
-      set_target_properties(GLEW::GLEW
-                            PROPERTIES IMPORTED_LOCATION_DEBUG "${GLEW_STATIC_LIBRARY_DEBUG}"
-                                       INTERFACE_COMPILE_DEFINITIONS GLEW_STATIC)
-    endif()
-
-  elseif(GLEW_VERBOSE)
-    message(WARNING "FindGLEW: no `GLEW::glew` or `GLEW::glew_s` target was created. Something went wrong in FindGLEW target creation.")
-  endif()
-endif()

cmake/modules/FindGTK3.cmake

@@ -1,51 +0,0 @@
-# - Try to find GTK+ 3
-# Once done, this will define
-#
-# GTK3_FOUND - system has GTK+ 3.
-# GTK3_INCLUDE_DIRS - the GTK+ 3. include directories
-# GTK3_LIBRARIES - link these to use GTK+ 3.
-#
-# Copyright (C) 2012 Raphael Kubo da Costa <rakuco@webkit.org>
-# Copyright (C) 2013 Igalia S.L.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND ITS CONTRIBUTORS ``AS
-# IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR ITS
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-find_package(PkgConfig)
-pkg_check_modules(GTK3 QUIET gtk+-3.0)
-set(VERSION_OK TRUE)
-if (GTK3_VERSION)
-if (GTK3_FIND_VERSION_EXACT)
-if (NOT("${GTK3_FIND_VERSION}" VERSION_EQUAL "${GTK3_VERSION}"))
-set(VERSION_OK FALSE)
-endif ()
-else ()
-if ("${GTK3_VERSION}" VERSION_LESS "${GTK3_FIND_VERSION}")
-set(VERSION_OK FALSE)
-endif ()
-endif ()
-endif ()
-# Check for GDK Wayland support
-include(CheckSymbolExists)
-set(CMAKE_REQUIRED_INCLUDES ${GTK3_INCLUDE_DIRS})
-check_symbol_exists(GDK_WINDOWING_WAYLAND "gdk/gdk.h" wxHAVE_GDK_WAYLAND)
-check_symbol_exists(GDK_WINDOWING_X11 "gdk/gdk.h" wxHAVE_GDK_X11)
-include(FindPackageHandleStandardArgs)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTK3 DEFAULT_MSG GTK3_INCLUDE_DIRS GTK3_LIBRARIES VERSION_OK)

cmake/modules/FindNLopt.cmake

@@ -1,36 +0,0 @@
-#///////////////////////////////////////////////////////////////////////////
-#//-------------------------------------------------------------------------
-#//
-#// Description:
-#//      cmake module for finding NLopt installation
-#//
-#//      Example usage:
-#//          find_package(NLopt 1.4 REQUIRED)
-#//
-#//
-#//-------------------------------------------------------------------------
-
-include(FindPackageHandleStandardArgs)
-
-unset(_q)
-if (NLopt_FIND_QUIETLY)
-	set(_q QUIET)
-endif ()
-
-find_package(NLopt ${NLopt_VERSION} CONFIG ${_q})
-find_package_handle_standard_args(NLopt CONFIG_MODE)
-
-# report result
-if(NLopt_FOUND AND NOT _q)
-	get_filename_component(NLOPT_LIBRARY_DIRS ${NLOPT_LIBRARY_DIRS} ABSOLUTE)
-	get_filename_component(NLOPT_INCLUDE_DIRS ${NLOPT_INCLUDE_DIRS} ABSOLUTE)
-
-	message(STATUS "Found NLopt in '${NLOPT_LIBRARY_DIRS}'.")
-	message(STATUS "Using NLopt include directory '${NLOPT_INCLUDE_DIRS}'.")
-
-	get_target_property(_configs NLopt::nlopt IMPORTED_CONFIGURATIONS)
-	foreach (_config ${_configs})
-		get_target_property(_lib NLopt::nlopt IMPORTED_LOCATION_${_config})
-		message(STATUS "Found NLopt ${_config} library: ${_lib}")
-	endforeach ()
-endif()

cmake/modules/FindOpenVDB.cmake

@@ -1,589 +0,0 @@
-# Copyright (c) DreamWorks Animation LLC
-#
-# All rights reserved. This software is distributed under the
-# Mozilla Public License 2.0 ( http://www.mozilla.org/MPL/2.0/ )
-#
-# Redistributions of source code must retain the above copyright
-# and license notice and the following restrictions and disclaimer.
-#
-# *     Neither the name of DreamWorks Animation nor the names of
-# its contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# IN NO EVENT SHALL THE COPYRIGHT HOLDERS' AND CONTRIBUTORS' AGGREGATE
-# LIABILITY FOR ALL CLAIMS REGARDLESS OF THEIR BASIS EXCEED US$250.00.
-#
-#[=======================================================================[.rst:
-
-FindOpenVDB
------------
-
-Find OpenVDB include dirs, libraries and settings
-
-Use this module by invoking find_package with the form::
-
-  find_package(OpenVDB
-    [version] [EXACT]      # Minimum or EXACT version
-    [REQUIRED]             # Fail with error if OpenVDB is not found
-    [COMPONENTS <libs>...] # OpenVDB libraries by their canonical name
-                           # e.g. "openvdb" for "libopenvdb"
-    )
-
-IMPORTED Targets
-^^^^^^^^^^^^^^^^
-
-``OpenVDB::openvdb``
-  The core openvdb library target.
-
-Result Variables
-^^^^^^^^^^^^^^^^
-
-This will define the following variables:
-
-``OpenVDB_FOUND``
-  True if the system has the OpenVDB library.
-``OpenVDB_VERSION``
-  The version of the OpenVDB library which was found.
-``OpenVDB_INCLUDE_DIRS``
-  Include directories needed to use OpenVDB.
-``OpenVDB_LIBRARIES``
-  Libraries needed to link to OpenVDB.
-``OpenVDB_LIBRARY_DIRS``
-  OpenVDB library directories.
-``OpenVDB_DEFINITIONS``
-  Definitions to use when compiling code that uses OpenVDB.
-``OpenVDB_{COMPONENT}_FOUND``
-  True if the system has the named OpenVDB component.
-``OpenVDB_USES_BLOSC``
-  True if the OpenVDB Library has been built with blosc support
-``OpenVDB_USES_LOG4CPLUS``
-  True if the OpenVDB Library has been built with log4cplus support
-``OpenVDB_USES_EXR``
-  True if the OpenVDB Library has been built with openexr support
-``OpenVDB_ABI``
-  Set if this module was able to determine the ABI number the located
-  OpenVDB Library was built against. Unset otherwise.
-
-Cache Variables
-^^^^^^^^^^^^^^^
-
-The following cache variables may also be set:
-
-``OpenVDB_INCLUDE_DIR``
-  The directory containing ``openvdb/version.h``.
-``OpenVDB_{COMPONENT}_LIBRARY``
-  Individual component libraries for OpenVDB
-
-Hints
-^^^^^
-
-Instead of explicitly setting the cache variables, the following variables
-may be provided to tell this module where to look.
-
-``OPENVDB_ROOT``
-  Preferred installation prefix.
-``OPENVDB_INCLUDEDIR``
-  Preferred include directory e.g. <prefix>/include
-``OPENVDB_LIBRARYDIR``
-  Preferred library directory e.g. <prefix>/lib
-``SYSTEM_LIBRARY_PATHS``
-  Paths appended to all include and lib searches.
-
-#]=======================================================================]
-
-# If an explicit openvdb module path was specified, that will be used
-if (OPENVDB_FIND_MODULE_PATH)
-  set(_module_path_bak ${CMAKE_MODULE_PATH})
-  set(CMAKE_MODULE_PATH ${OPENVDB_FIND_MODULE_PATH})
-  find_package(
-    OpenVDB ${OpenVDB_FIND_VERSION} QUIET
-    COMPONENTS
-      ${OpenVDB_FIND_COMPONENTS}
-  )
-
-  set(CMAKE_MODULE_PATH ${_module_path_bak})
-  if (OpenVDB_FOUND)
-    return()
-  endif ()
-
-  if (NOT OpenVDB_FIND_QUIETLY)
-    message(STATUS "Using bundled find module for OpenVDB")
-  endif ()
-endif ()
-# ###########################################################################
-
-cmake_minimum_required(VERSION 3.13)
-# Monitoring <PackageName>_ROOT variables
-if(POLICY CMP0074)
-  cmake_policy(SET CMP0074 NEW)
-endif()
-
-if(OpenVDB_FIND_QUIETLY)
-  set (_quiet "QUIET")
-else()
-  set (_quiet "")
-endif()
-
-if(OpenVDB_FIND_REQUIRED)
-  set (_required "REQUIRED")
-else()
-  set (_required "")
-endif()
-
-# Include utility functions for version information
-include(${CMAKE_CURRENT_LIST_DIR}/OpenVDBUtils.cmake)
-
-mark_as_advanced(
-  OpenVDB_INCLUDE_DIR
-  OpenVDB_LIBRARY
-)
-
-set(_OPENVDB_COMPONENT_LIST
-  openvdb
-)
-
-if(OpenVDB_FIND_COMPONENTS)
-  set(OPENVDB_COMPONENTS_PROVIDED TRUE)
-  set(_IGNORED_COMPONENTS "")
-  foreach(COMPONENT ${OpenVDB_FIND_COMPONENTS})
-    if(NOT ${COMPONENT} IN_LIST _OPENVDB_COMPONENT_LIST)
-      list(APPEND _IGNORED_COMPONENTS ${COMPONENT})
-    endif()
-  endforeach()
-
-  if(_IGNORED_COMPONENTS)
-    message(STATUS "Ignoring unknown components of OpenVDB:")
-    foreach(COMPONENT ${_IGNORED_COMPONENTS})
-      message(STATUS "  ${COMPONENT}")
-    endforeach()
-    list(REMOVE_ITEM OpenVDB_FIND_COMPONENTS ${_IGNORED_COMPONENTS})
-  endif()
-else()
-  set(OPENVDB_COMPONENTS_PROVIDED FALSE)
-  set(OpenVDB_FIND_COMPONENTS ${_OPENVDB_COMPONENT_LIST})
-endif()
-
-# Append OPENVDB_ROOT or $ENV{OPENVDB_ROOT} if set (prioritize the direct cmake var)
-set(_OPENVDB_ROOT_SEARCH_DIR "")
-
-# Additionally try and use pkconfig to find OpenVDB
-
-find_package(PkgConfig ${_quiet} )
-pkg_check_modules(PC_OpenVDB QUIET OpenVDB)
-
-# ------------------------------------------------------------------------
-#  Search for OpenVDB include DIR
-# ------------------------------------------------------------------------
-
-set(_OPENVDB_INCLUDE_SEARCH_DIRS "")
-list(APPEND _OPENVDB_INCLUDE_SEARCH_DIRS
-  ${OPENVDB_INCLUDEDIR}
-  ${_OPENVDB_ROOT_SEARCH_DIR}
-  ${PC_OpenVDB_INCLUDE_DIRS}
-  ${SYSTEM_LIBRARY_PATHS}
-)
-
-# Look for a standard OpenVDB header file.
-find_path(OpenVDB_INCLUDE_DIR openvdb/version.h
-  PATHS ${_OPENVDB_INCLUDE_SEARCH_DIRS}
-  PATH_SUFFIXES include
-)
-
-OPENVDB_VERSION_FROM_HEADER("${OpenVDB_INCLUDE_DIR}/openvdb/version.h"
-  VERSION OpenVDB_VERSION
-  MAJOR   OpenVDB_MAJOR_VERSION
-  MINOR   OpenVDB_MINOR_VERSION
-  PATCH   OpenVDB_PATCH_VERSION
-)
-
-# ------------------------------------------------------------------------
-#  Search for OPENVDB lib DIR
-# ------------------------------------------------------------------------
-
-set(_OPENVDB_LIBRARYDIR_SEARCH_DIRS "")
-
-# Append to _OPENVDB_LIBRARYDIR_SEARCH_DIRS in priority order
-
-list(APPEND _OPENVDB_LIBRARYDIR_SEARCH_DIRS
-  ${OPENVDB_LIBRARYDIR}
-  ${_OPENVDB_ROOT_SEARCH_DIR}
-  ${PC_OpenVDB_LIBRARY_DIRS}
-  ${SYSTEM_LIBRARY_PATHS}
-)
-
-# Build suffix directories
-
-set(OPENVDB_PATH_SUFFIXES
-  lib64
-  lib
-)
-
-# Static library setup
-if(UNIX AND OPENVDB_USE_STATIC_LIBS)
-  set(_OPENVDB_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
-  set(CMAKE_FIND_LIBRARY_SUFFIXES ".a")
-endif()
-
-set(OpenVDB_LIB_COMPONENTS "")
-set(OpenVDB_DEBUG_SUFFIX "d" CACHE STRING "Suffix for the debug libraries")
-
-# get_property(_is_multi GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
-set(_is_multi FALSE)
-
-foreach(COMPONENT ${OpenVDB_FIND_COMPONENTS})
-  set(LIB_NAME ${COMPONENT})
-
-  find_library(OpenVDB_${COMPONENT}_LIBRARY_RELEASE ${LIB_NAME} lib${LIB_NAME}
-    PATHS ${_OPENVDB_LIBRARYDIR_SEARCH_DIRS}
-    PATH_SUFFIXES ${OPENVDB_PATH_SUFFIXES}
-  )
-
-  find_library(OpenVDB_${COMPONENT}_LIBRARY_DEBUG ${LIB_NAME}${OpenVDB_DEBUG_SUFFIX} lib${LIB_NAME}${OpenVDB_DEBUG_SUFFIX}
-    PATHS ${_OPENVDB_LIBRARYDIR_SEARCH_DIRS}
-    PATH_SUFFIXES ${OPENVDB_PATH_SUFFIXES}
-  )
-
-  if (_is_multi)
-    list(APPEND OpenVDB_LIB_COMPONENTS ${OpenVDB_${COMPONENT}_LIBRARY_RELEASE})
-    if (OpenVDB_${COMPONENT}_LIBRARY_DEBUG)
-      list(APPEND OpenVDB_LIB_COMPONENTS ${OpenVDB_${COMPONENT}_LIBRARY_DEBUG})
-    endif ()
-
-    list(FIND CMAKE_CONFIGURATION_TYPES "Debug" _has_debug)
-    
-    if(OpenVDB_${COMPONENT}_LIBRARY_RELEASE AND (NOT MSVC OR _has_debug LESS 0 OR OpenVDB_${COMPONENT}_LIBRARY_DEBUG))
-      set(OpenVDB_${COMPONENT}_FOUND TRUE)
-    else()
-      set(OpenVDB_${COMPONENT}_FOUND FALSE)
-    endif()
-
-    set(OpenVDB_${COMPONENT}_LIBRARY ${OpenVDB_${COMPONENT}_LIBRARY_RELEASE})
-  else ()
-    string(TOUPPER "${CMAKE_BUILD_TYPE}" _BUILD_TYPE)
-
-    set(OpenVDB_${COMPONENT}_LIBRARY ${OpenVDB_${COMPONENT}_LIBRARY_${_BUILD_TYPE}})
-
-    if (NOT OpenVDB_${COMPONENT}_LIBRARY)
-      set(OpenVDB_${COMPONENT}_LIBRARY ${OpenVDB_${COMPONENT}_LIBRARY_RELEASE})
-    endif ()
-
-    list(APPEND OpenVDB_LIB_COMPONENTS ${OpenVDB_${COMPONENT}_LIBRARY})
-
-    if(OpenVDB_${COMPONENT}_LIBRARY)
-      set(OpenVDB_${COMPONENT}_FOUND TRUE)
-    else()
-      set(OpenVDB_${COMPONENT}_FOUND FALSE)
-    endif()
-  endif ()
-
-endforeach()
-
-if(UNIX AND OPENVDB_USE_STATIC_LIBS)
-  set(CMAKE_FIND_LIBRARY_SUFFIXES ${_OPENVDB_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
-  unset(_OPENVDB_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES)
-endif()
-
-# ------------------------------------------------------------------------
-#  Cache and set OPENVDB_FOUND
-# ------------------------------------------------------------------------
-
-include(FindPackageHandleStandardArgs)
-find_package_handle_standard_args(OpenVDB
-  FOUND_VAR OpenVDB_FOUND
-  REQUIRED_VARS
-    OpenVDB_INCLUDE_DIR
-    OpenVDB_LIB_COMPONENTS
-  VERSION_VAR OpenVDB_VERSION
-  HANDLE_COMPONENTS
-)
-
-# ------------------------------------------------------------------------
-#  Determine ABI number
-# ------------------------------------------------------------------------
-
-# Set the ABI number the library was built against. Uses vdb_print
-find_program(OPENVDB_PRINT vdb_print PATHS ${OpenVDB_INCLUDE_DIR} )
-
-OPENVDB_ABI_VERSION_FROM_PRINT(
-  "${OPENVDB_PRINT}"
-  ABI OpenVDB_ABI
-)
-
-if(NOT OpenVDB_FIND_QUIETLY)
-  if(NOT OpenVDB_ABI)
-    message(WARNING "Unable to determine OpenVDB ABI version from OpenVDB "
-      "installation. The library major version \"${OpenVDB_MAJOR_VERSION}\" "
-      "will be inferred. If this is not correct, use "
-      "add_definitions(-DOPENVDB_ABI_VERSION_NUMBER=N)"
-    )
-  else()
-    message(STATUS "OpenVDB ABI Version: ${OpenVDB_ABI}")
-  endif()
-endif()
-
-# ------------------------------------------------------------------------
-#  Handle OpenVDB dependencies
-# ------------------------------------------------------------------------
-
-# Add standard dependencies
-
-macro(just_fail msg)
-  set(OpenVDB_FOUND FALSE)
-  if(OpenVDB_FIND_REQUIRED)
-    message(FATAL_ERROR ${msg})
-  elseif(NOT OpenVDB_FIND_QUIETLY)
-    message(WARNING ${msg})
-  endif()
-  return()
-endmacro()
-
-find_package(IlmBase QUIET)
-if(NOT IlmBase_FOUND)
-  pkg_check_modules(IlmBase QUIET IlmBase)
-endif()
-if (IlmBase_FOUND AND NOT TARGET IlmBase::Half)
-  message(STATUS "Falling back to IlmBase found by pkg-config...")
-
-  find_library(IlmHalf_LIBRARY NAMES Half)
-  if(IlmHalf_LIBRARY-NOTFOUND OR NOT IlmBase_INCLUDE_DIRS)
-    just_fail("IlmBase::Half can not be found!")
-  endif()
-  
-  add_library(IlmBase::Half UNKNOWN IMPORTED)
-  set_target_properties(IlmBase::Half PROPERTIES
-    IMPORTED_LOCATION "${IlmHalf_LIBRARY}"
-    INTERFACE_INCLUDE_DIRECTORIES "${IlmBase_INCLUDE_DIRS}")
-elseif(NOT IlmBase_FOUND)
-  just_fail("IlmBase::Half can not be found!")
-endif()
-find_package(TBB ${_quiet} ${_required} COMPONENTS tbb)
-find_package(ZLIB ${_quiet} ${_required})
-find_package(Boost ${_quiet} ${_required} COMPONENTS iostreams system )
-
-# Use GetPrerequisites to see which libraries this OpenVDB lib has linked to
-# which we can query for optional deps. This basically runs ldd/otoll/objdump
-# etc to track deps. We could use a vdb_config binary tools here to improve
-# this process
-
-include(GetPrerequisites)
-
-set(_EXCLUDE_SYSTEM_PREREQUISITES 1)
-set(_RECURSE_PREREQUISITES 0)
-set(_OPENVDB_PREREQUISITE_LIST)
-
-if(NOT OPENVDB_USE_STATIC_LIBS)
-get_prerequisites(${OpenVDB_openvdb_LIBRARY}
-  _OPENVDB_PREREQUISITE_LIST
-  ${_EXCLUDE_SYSTEM_PREREQUISITES}
-  ${_RECURSE_PREREQUISITES}
-  ""
-  "${SYSTEM_LIBRARY_PATHS}"
-)
-endif()
-
-unset(_EXCLUDE_SYSTEM_PREREQUISITES)
-unset(_RECURSE_PREREQUISITES)
-
-# As the way we resolve optional libraries relies on library file names, use
-# the configuration options from the main CMakeLists.txt to allow users
-# to manually identify the requirements of OpenVDB builds if they know them.
-
-set(OpenVDB_USES_BLOSC ${USE_BLOSC})
-set(OpenVDB_USES_LOG4CPLUS ${USE_LOG4CPLUS})
-set(OpenVDB_USES_ILM ${USE_EXR})
-set(OpenVDB_USES_EXR ${USE_EXR})
-
-# Search for optional dependencies
-
-foreach(PREREQUISITE ${_OPENVDB_PREREQUISITE_LIST})
-  set(_HAS_DEP)
-  get_filename_component(PREREQUISITE ${PREREQUISITE} NAME)
-
-  string(FIND ${PREREQUISITE} "blosc" _HAS_DEP)
-  if(NOT ${_HAS_DEP} EQUAL -1)
-    set(OpenVDB_USES_BLOSC ON)
-  endif()
-
-  string(FIND ${PREREQUISITE} "log4cplus" _HAS_DEP)
-  if(NOT ${_HAS_DEP} EQUAL -1)
-    set(OpenVDB_USES_LOG4CPLUS ON)
-  endif()
-
-  string(FIND ${PREREQUISITE} "IlmImf" _HAS_DEP)
-  if(NOT ${_HAS_DEP} EQUAL -1)
-    set(OpenVDB_USES_ILM ON)
-  endif()
-endforeach()
-
-unset(_OPENVDB_PREREQUISITE_LIST)
-unset(_HAS_DEP)
-
-if(OpenVDB_USES_BLOSC)
-  find_package(Blosc QUIET)
-  if(NOT Blosc_FOUND OR NOT TARGET Blosc::blosc) 
-    message(STATUS "find_package could not find Blosc. Using fallback blosc search...")
-    find_path(Blosc_INCLUDE_DIR blosc.h)
-    find_library(Blosc_LIBRARY NAMES blosc)
-    if (Blosc_INCLUDE_DIR AND Blosc_LIBRARY)
-      set(Blosc_FOUND TRUE)
-      add_library(Blosc::blosc UNKNOWN IMPORTED)
-      set_target_properties(Blosc::blosc PROPERTIES 
-        IMPORTED_LOCATION "${Blosc_LIBRARY}"
-        INTERFACE_INCLUDE_DIRECTORIES ${Blosc_INCLUDE_DIR})
-    elseif()
-      just_fail("Blosc library can not be found!")
-    endif()
-  endif()
-endif()
-
-if(OpenVDB_USES_LOG4CPLUS)
-  find_package(Log4cplus ${_quiet} ${_required})
-endif()
-
-if(OpenVDB_USES_ILM)
-  find_package(IlmBase ${_quiet} ${_required})
-endif()
-
-if(OpenVDB_USES_EXR)
-  find_package(OpenEXR ${_quiet} ${_required})
-endif()
-
-if(UNIX)
-  find_package(Threads ${_quiet} ${_required})
-endif()
-
-# Set deps. Note that the order here is important. If we're building against
-# Houdini 17.5 we must include OpenEXR and IlmBase deps first to ensure the
-# users chosen namespaced headers are correctly prioritized. Otherwise other
-# include paths from shared installs (including houdini) may pull in the wrong
-# headers
-
-set(_OPENVDB_VISIBLE_DEPENDENCIES
-  Boost::iostreams
-  Boost::system
-  IlmBase::Half
-)
-
-set(_OPENVDB_DEFINITIONS)
-if(OpenVDB_ABI)
-  list(APPEND _OPENVDB_DEFINITIONS "-DOPENVDB_ABI_VERSION_NUMBER=${OpenVDB_ABI}")
-endif()
-
-if(OpenVDB_USES_EXR)
-  list(APPEND _OPENVDB_VISIBLE_DEPENDENCIES
-    IlmBase::IlmThread
-    IlmBase::Iex
-    IlmBase::Imath
-    OpenEXR::IlmImf
-  )
-  list(APPEND _OPENVDB_DEFINITIONS "-DOPENVDB_TOOLS_RAYTRACER_USE_EXR")
-endif()
-
-if(OpenVDB_USES_LOG4CPLUS)
-  list(APPEND _OPENVDB_VISIBLE_DEPENDENCIES Log4cplus::log4cplus)
-  list(APPEND _OPENVDB_DEFINITIONS "-DOPENVDB_USE_LOG4CPLUS")
-endif()
-
-list(APPEND _OPENVDB_VISIBLE_DEPENDENCIES
-  TBB::tbb
-)
-if(UNIX)
-  list(APPEND _OPENVDB_VISIBLE_DEPENDENCIES
-    Threads::Threads
-  )
-endif()
-
-set(_OPENVDB_HIDDEN_DEPENDENCIES)
-
-if(OpenVDB_USES_BLOSC)
-  if(OPENVDB_USE_STATIC_LIBS)
-    list(APPEND _OPENVDB_VISIBLE_DEPENDENCIES $<LINK_ONLY:Blosc::blosc>)
-  else()
-    list(APPEND _OPENVDB_HIDDEN_DEPENDENCIES Blosc::blosc)
-  endif()
-endif()
-
-if(OPENVDB_USE_STATIC_LIBS)
-  list(APPEND _OPENVDB_VISIBLE_DEPENDENCIES $<LINK_ONLY:ZLIB::ZLIB>)
-else()
-  list(APPEND _OPENVDB_HIDDEN_DEPENDENCIES ZLIB::ZLIB)
-endif()
-
-# ------------------------------------------------------------------------
-#  Configure imported target
-# ------------------------------------------------------------------------
-
-set(OpenVDB_LIBRARIES
-  ${OpenVDB_LIB_COMPONENTS}
-)
-set(OpenVDB_INCLUDE_DIRS ${OpenVDB_INCLUDE_DIR})
-
-set(OpenVDB_DEFINITIONS)
-list(APPEND OpenVDB_DEFINITIONS "${PC_OpenVDB_CFLAGS_OTHER}")
-list(APPEND OpenVDB_DEFINITIONS "${_OPENVDB_DEFINITIONS}")
-list(REMOVE_DUPLICATES OpenVDB_DEFINITIONS)
-
-set(OpenVDB_LIBRARY_DIRS "")
-foreach(LIB ${OpenVDB_LIB_COMPONENTS})
-  get_filename_component(_OPENVDB_LIBDIR ${LIB} DIRECTORY)
-  list(APPEND OpenVDB_LIBRARY_DIRS ${_OPENVDB_LIBDIR})
-endforeach()
-list(REMOVE_DUPLICATES OpenVDB_LIBRARY_DIRS)
-
-foreach(COMPONENT ${OpenVDB_FIND_COMPONENTS})
-  if(NOT TARGET OpenVDB::${COMPONENT})
-    if (${COMPONENT} STREQUAL openvdb)
-      include (${CMAKE_CURRENT_LIST_DIR}/CheckAtomic.cmake)
-      set(_LINK_LIBS ${_OPENVDB_VISIBLE_DEPENDENCIES} ${CMAKE_REQUIRED_LIBRARIES})
-    else ()
-      set(_LINK_LIBS _OPENVDB_VISIBLE_DEPENDENCIES)
-    endif ()
-
-    add_library(OpenVDB::${COMPONENT} UNKNOWN IMPORTED)
-    set_target_properties(OpenVDB::${COMPONENT} PROPERTIES
-      INTERFACE_COMPILE_OPTIONS "${OpenVDB_DEFINITIONS}"
-      INTERFACE_INCLUDE_DIRECTORIES "${OpenVDB_INCLUDE_DIR}"
-      IMPORTED_LINK_DEPENDENT_LIBRARIES "${_OPENVDB_HIDDEN_DEPENDENCIES}" # non visible deps
-      INTERFACE_LINK_LIBRARIES "${_LINK_LIBS}" # visible deps (headers)
-      INTERFACE_COMPILE_FEATURES cxx_std_11
-      IMPORTED_LOCATION "${OpenVDB_${COMPONENT}_LIBRARY}"
-   )
-
-   if (_is_multi)
-     set_target_properties(OpenVDB::${COMPONENT} PROPERTIES 
-       IMPORTED_LOCATION_RELEASE "${OpenVDB_${COMPONENT}_LIBRARY_RELEASE}"
-     )
-
-     if (MSVC OR OpenVDB_${COMPONENT}_LIBRARY_DEBUG)
-      set_target_properties(OpenVDB::${COMPONENT} PROPERTIES 
-        IMPORTED_LOCATION_DEBUG "${OpenVDB_${COMPONENT}_LIBRARY_DEBUG}"
-      ) 
-     endif ()
-   endif ()
-
-   if (OPENVDB_USE_STATIC_LIBS)
-    set_target_properties(OpenVDB::${COMPONENT} PROPERTIES
-      INTERFACE_COMPILE_DEFINITIONS "OPENVDB_STATICLIB;OPENVDB_OPENEXR_STATICLIB"
-    )
-   endif()
-  endif()
-endforeach()
-
-if(OpenVDB_FOUND AND NOT OpenVDB_FIND_QUIETLY)
-  message(STATUS "OpenVDB libraries: ${OpenVDB_LIBRARIES}")
-endif()
-
-unset(_OPENVDB_DEFINITIONS)
-unset(_OPENVDB_VISIBLE_DEPENDENCIES)
-unset(_OPENVDB_HIDDEN_DEPENDENCIES)

cmake/modules/FindPackageHandleStandardArgs_SLIC3R.cmake

@@ -1,392 +0,0 @@
-# Modified from the CMake github master,
-# required by the bundled FindCURL.cmake
-
-
-
-
-# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
-# file Copyright.txt or https://cmake.org/licensing for details.
-
-#[=======================================================================[.rst:
-FindPackageHandleStandardArgs
------------------------------
-
-This module provides a function intended to be used in :ref:`Find Modules`
-implementing :command:`find_package(<PackageName>)` calls.  It handles the
-``REQUIRED``, ``QUIET`` and version-related arguments of ``find_package``.
-It also sets the ``<PackageName>_FOUND`` variable.  The package is
-considered found if all variables listed contain valid results, e.g.
-valid filepaths.
-
-.. command:: find_package_handle_standard_args
-
-  There are two signatures::
-
-    find_package_handle_standard_args(<PackageName>
-      (DEFAULT_MSG|<custom-failure-message>)
-      <required-var>...
-      )
-
-    find_package_handle_standard_args(<PackageName>
-      [FOUND_VAR <result-var>]
-      [REQUIRED_VARS <required-var>...]
-      [VERSION_VAR <version-var>]
-      [HANDLE_COMPONENTS]
-      [CONFIG_MODE]
-      [FAIL_MESSAGE <custom-failure-message>]
-      )
-
-  The ``<PackageName>_FOUND`` variable will be set to ``TRUE`` if all
-  the variables ``<required-var>...`` are valid and any optional
-  constraints are satisfied, and ``FALSE`` otherwise.  A success or
-  failure message may be displayed based on the results and on
-  whether the ``REQUIRED`` and/or ``QUIET`` option was given to
-  the :command:`find_package` call.
-
-  The options are:
-
-  ``(DEFAULT_MSG|<custom-failure-message>)``
-    In the simple signature this specifies the failure message.
-    Use ``DEFAULT_MSG`` to ask for a default message to be computed
-    (recommended).  Not valid in the full signature.
-
-  ``FOUND_VAR <result-var>``
-    Obsolete.  Specifies either ``<PackageName>_FOUND`` or
-    ``<PACKAGENAME>_FOUND`` as the result variable.  This exists only
-    for compatibility with older versions of CMake and is now ignored.
-    Result variables of both names are always set for compatibility.
-
-  ``REQUIRED_VARS <required-var>...``
-    Specify the variables which are required for this package.
-    These may be named in the generated failure message asking the
-    user to set the missing variable values.  Therefore these should
-    typically be cache entries such as ``FOO_LIBRARY`` and not output
-    variables like ``FOO_LIBRARIES``.
-
-  ``VERSION_VAR <version-var>``
-    Specify the name of a variable that holds the version of the package
-    that has been found.  This version will be checked against the
-    (potentially) specified required version given to the
-    :command:`find_package` call, including its ``EXACT`` option.
-    The default messages include information about the required
-    version and the version which has been actually found, both
-    if the version is ok or not.
-
-  ``HANDLE_COMPONENTS``
-    Enable handling of package components.  In this case, the command
-    will report which components have been found and which are missing,
-    and the ``<PackageName>_FOUND`` variable will be set to ``FALSE``
-    if any of the required components (i.e. not the ones listed after
-    the ``OPTIONAL_COMPONENTS`` option of :command:`find_package`) are
-    missing.
-
-  ``CONFIG_MODE``
-    Specify that the calling find module is a wrapper around a
-    call to ``find_package(<PackageName> NO_MODULE)``.  This implies
-    a ``VERSION_VAR`` value of ``<PackageName>_VERSION``.  The command
-    will automatically check whether the package configuration file
-    was found.
-
-  ``FAIL_MESSAGE <custom-failure-message>``
-    Specify a custom failure message instead of using the default
-    generated message.  Not recommended.
-
-Example for the simple signature:
-
-.. code-block:: cmake
-
-  find_package_handle_standard_args(LibXml2 DEFAULT_MSG
-    LIBXML2_LIBRARY LIBXML2_INCLUDE_DIR)
-
-The ``LibXml2`` package is considered to be found if both
-``LIBXML2_LIBRARY`` and ``LIBXML2_INCLUDE_DIR`` are valid.
-Then also ``LibXml2_FOUND`` is set to ``TRUE``.  If it is not found
-and ``REQUIRED`` was used, it fails with a
-:command:`message(FATAL_ERROR)`, independent whether ``QUIET`` was
-used or not.  If it is found, success will be reported, including
-the content of the first ``<required-var>``.  On repeated CMake runs,
-the same message will not be printed again.
-
-Example for the full signature:
-
-.. code-block:: cmake
-
-  find_package_handle_standard_args(LibArchive
-    REQUIRED_VARS LibArchive_LIBRARY LibArchive_INCLUDE_DIR
-    VERSION_VAR LibArchive_VERSION)
-
-In this case, the ``LibArchive`` package is considered to be found if
-both ``LibArchive_LIBRARY`` and ``LibArchive_INCLUDE_DIR`` are valid.
-Also the version of ``LibArchive`` will be checked by using the version
-contained in ``LibArchive_VERSION``.  Since no ``FAIL_MESSAGE`` is given,
-the default messages will be printed.
-
-Another example for the full signature:
-
-.. code-block:: cmake
-
-  find_package(Automoc4 QUIET NO_MODULE HINTS /opt/automoc4)
-  find_package_handle_standard_args(Automoc4  CONFIG_MODE)
-
-In this case, a ``FindAutmoc4.cmake`` module wraps a call to
-``find_package(Automoc4 NO_MODULE)`` and adds an additional search
-directory for ``automoc4``.  Then the call to
-``find_package_handle_standard_args`` produces a proper success/failure
-message.
-#]=======================================================================]
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageMessage_SLIC3R.cmake)
-
-# internal helper macro
-macro(_FPHSA_FAILURE_MESSAGE _msg)
-  if (${_NAME}_FIND_REQUIRED)
-    message(FATAL_ERROR "${_msg}")
-  else ()
-    if (NOT ${_NAME}_FIND_QUIETLY)
-      message(STATUS "${_msg}")
-    endif ()
-  endif ()
-endmacro()
-
-
-# internal helper macro to generate the failure message when used in CONFIG_MODE:
-macro(_FPHSA_HANDLE_FAILURE_CONFIG_MODE)
-  # <PackageName>_CONFIG is set, but FOUND is false, this means that some other of the REQUIRED_VARS was not found:
-  if(${_NAME}_CONFIG)
-    _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: missing:${MISSING_VARS} (found ${${_NAME}_CONFIG} ${VERSION_MSG})")
-  else()
-    # If _CONSIDERED_CONFIGS is set, the config-file has been found, but no suitable version.
-    # List them all in the error message:
-    if(${_NAME}_CONSIDERED_CONFIGS)
-      set(configsText "")
-      list(LENGTH ${_NAME}_CONSIDERED_CONFIGS configsCount)
-      math(EXPR configsCount "${configsCount} - 1")
-      foreach(currentConfigIndex RANGE ${configsCount})
-        list(GET ${_NAME}_CONSIDERED_CONFIGS ${currentConfigIndex} filename)
-        list(GET ${_NAME}_CONSIDERED_VERSIONS ${currentConfigIndex} version)
-        string(APPEND configsText "    ${filename} (version ${version})\n")
-      endforeach()
-      if (${_NAME}_NOT_FOUND_MESSAGE)
-        string(APPEND configsText "    Reason given by package: ${${_NAME}_NOT_FOUND_MESSAGE}\n")
-      endif()
-      _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE} ${VERSION_MSG}, checked the following files:\n${configsText}")
-
-    else()
-      # Simple case: No Config-file was found at all:
-      _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: found neither ${_NAME}Config.cmake nor ${_NAME_LOWER}-config.cmake ${VERSION_MSG}")
-    endif()
-  endif()
-endmacro()
-
-
-function(FIND_PACKAGE_HANDLE_STANDARD_ARGS_SLIC3R _NAME _FIRST_ARG)
-
-# Set up the arguments for `cmake_parse_arguments`.
-  set(options  CONFIG_MODE  HANDLE_COMPONENTS)
-  set(oneValueArgs  FAIL_MESSAGE  VERSION_VAR  FOUND_VAR)
-  set(multiValueArgs REQUIRED_VARS)
-
-# Check whether we are in 'simple' or 'extended' mode:
-  set(_KEYWORDS_FOR_EXTENDED_MODE  ${options} ${oneValueArgs} ${multiValueArgs} )
-  list(FIND _KEYWORDS_FOR_EXTENDED_MODE "${_FIRST_ARG}" INDEX)
-
-  if(${INDEX} EQUAL -1)
-    set(FPHSA_FAIL_MESSAGE ${_FIRST_ARG})
-    set(FPHSA_REQUIRED_VARS ${ARGN})
-    set(FPHSA_VERSION_VAR)
-  else()
-    cmake_parse_arguments(FPHSA "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${_FIRST_ARG} ${ARGN})
-
-    if(FPHSA_UNPARSED_ARGUMENTS)
-      message(FATAL_ERROR "Unknown keywords given to FIND_PACKAGE_HANDLE_STANDARD_ARGS(): \"${FPHSA_UNPARSED_ARGUMENTS}\"")
-    endif()
-
-    if(NOT FPHSA_FAIL_MESSAGE)
-      set(FPHSA_FAIL_MESSAGE  "DEFAULT_MSG")
-    endif()
-
-    # In config-mode, we rely on the variable <PackageName>_CONFIG, which is set by find_package()
-    # when it successfully found the config-file, including version checking:
-    if(FPHSA_CONFIG_MODE)
-      list(INSERT FPHSA_REQUIRED_VARS 0 ${_NAME}_CONFIG)
-      list(REMOVE_DUPLICATES FPHSA_REQUIRED_VARS)
-      set(FPHSA_VERSION_VAR ${_NAME}_VERSION)
-    endif()
-
-    if(NOT FPHSA_REQUIRED_VARS)
-      message(FATAL_ERROR "No REQUIRED_VARS specified for FIND_PACKAGE_HANDLE_STANDARD_ARGS()")
-    endif()
-  endif()
-
-# now that we collected all arguments, process them
-
-  if("x${FPHSA_FAIL_MESSAGE}" STREQUAL "xDEFAULT_MSG")
-    set(FPHSA_FAIL_MESSAGE "Could NOT find ${_NAME}")
-  endif()
-
-  list(GET FPHSA_REQUIRED_VARS 0 _FIRST_REQUIRED_VAR)
-
-  string(TOUPPER ${_NAME} _NAME_UPPER)
-  string(TOLOWER ${_NAME} _NAME_LOWER)
-
-  if(FPHSA_FOUND_VAR)
-    if(FPHSA_FOUND_VAR MATCHES "^${_NAME}_FOUND$"  OR  FPHSA_FOUND_VAR MATCHES "^${_NAME_UPPER}_FOUND$")
-      set(_FOUND_VAR ${FPHSA_FOUND_VAR})
-    else()
-      message(FATAL_ERROR "The argument for FOUND_VAR is \"${FPHSA_FOUND_VAR}\", but only \"${_NAME}_FOUND\" and \"${_NAME_UPPER}_FOUND\" are valid names.")
-    endif()
-  else()
-    set(_FOUND_VAR ${_NAME_UPPER}_FOUND)
-  endif()
-
-  # collect all variables which were not found, so they can be printed, so the
-  # user knows better what went wrong (#6375)
-  set(MISSING_VARS "")
-  set(DETAILS "")
-  # check if all passed variables are valid
-  set(FPHSA_FOUND_${_NAME} TRUE)
-  foreach(_CURRENT_VAR ${FPHSA_REQUIRED_VARS})
-    if(NOT ${_CURRENT_VAR})
-      set(FPHSA_FOUND_${_NAME} FALSE)
-      string(APPEND MISSING_VARS " ${_CURRENT_VAR}")
-    else()
-      string(APPEND DETAILS "[${${_CURRENT_VAR}}]")
-    endif()
-  endforeach()
-  if(FPHSA_FOUND_${_NAME})
-    set(${_NAME}_FOUND TRUE)
-    set(${_NAME_UPPER}_FOUND TRUE)
-  else()
-    set(${_NAME}_FOUND FALSE)
-    set(${_NAME_UPPER}_FOUND FALSE)
-  endif()
-
-  # component handling
-  unset(FOUND_COMPONENTS_MSG)
-  unset(MISSING_COMPONENTS_MSG)
-
-  if(FPHSA_HANDLE_COMPONENTS)
-    foreach(comp ${${_NAME}_FIND_COMPONENTS})
-      if(${_NAME}_${comp}_FOUND)
-
-        if(NOT DEFINED FOUND_COMPONENTS_MSG)
-          set(FOUND_COMPONENTS_MSG "found components: ")
-        endif()
-        string(APPEND FOUND_COMPONENTS_MSG " ${comp}")
-
-      else()
-
-        if(NOT DEFINED MISSING_COMPONENTS_MSG)
-          set(MISSING_COMPONENTS_MSG "missing components: ")
-        endif()
-        string(APPEND MISSING_COMPONENTS_MSG " ${comp}")
-
-        if(${_NAME}_FIND_REQUIRED_${comp})
-          set(${_NAME}_FOUND FALSE)
-          string(APPEND MISSING_VARS " ${comp}")
-        endif()
-
-      endif()
-    endforeach()
-    set(COMPONENT_MSG "${FOUND_COMPONENTS_MSG} ${MISSING_COMPONENTS_MSG}")
-    string(APPEND DETAILS "[c${COMPONENT_MSG}]")
-  endif()
-
-  # version handling:
-  set(VERSION_MSG "")
-  set(VERSION_OK TRUE)
-
-  # check with DEFINED here as the requested or found version may be "0"
-  if (DEFINED ${_NAME}_FIND_VERSION)
-    if(DEFINED ${FPHSA_VERSION_VAR})
-      set(_FOUND_VERSION ${${FPHSA_VERSION_VAR}})
-
-      if(${_NAME}_FIND_VERSION_EXACT)       # exact version required
-        # count the dots in the version string
-        string(REGEX REPLACE "[^.]" "" _VERSION_DOTS "${_FOUND_VERSION}")
-        # add one dot because there is one dot more than there are components
-        string(LENGTH "${_VERSION_DOTS}." _VERSION_DOTS)
-        if (_VERSION_DOTS GREATER ${_NAME}_FIND_VERSION_COUNT)
-          # Because of the C++ implementation of find_package() ${_NAME}_FIND_VERSION_COUNT
-          # is at most 4 here. Therefore a simple lookup table is used.
-          if (${_NAME}_FIND_VERSION_COUNT EQUAL 1)
-            set(_VERSION_REGEX "[^.]*")
-          elseif (${_NAME}_FIND_VERSION_COUNT EQUAL 2)
-            set(_VERSION_REGEX "[^.]*\\.[^.]*")
-          elseif (${_NAME}_FIND_VERSION_COUNT EQUAL 3)
-            set(_VERSION_REGEX "[^.]*\\.[^.]*\\.[^.]*")
-          else ()
-            set(_VERSION_REGEX "[^.]*\\.[^.]*\\.[^.]*\\.[^.]*")
-          endif ()
-          string(REGEX REPLACE "^(${_VERSION_REGEX})\\..*" "\\1" _VERSION_HEAD "${_FOUND_VERSION}")
-          unset(_VERSION_REGEX)
-          if (NOT ${_NAME}_FIND_VERSION VERSION_EQUAL _VERSION_HEAD)
-            set(VERSION_MSG "Found unsuitable version \"${_FOUND_VERSION}\", but required is exact version \"${${_NAME}_FIND_VERSION}\"")
-            set(VERSION_OK FALSE)
-          else ()
-            set(VERSION_MSG "(found suitable exact version \"${_FOUND_VERSION}\")")
-          endif ()
-          unset(_VERSION_HEAD)
-        else ()
-          if (NOT ${_NAME}_FIND_VERSION VERSION_EQUAL _FOUND_VERSION)
-            set(VERSION_MSG "Found unsuitable version \"${_FOUND_VERSION}\", but required is exact version \"${${_NAME}_FIND_VERSION}\"")
-            set(VERSION_OK FALSE)
-          else ()
-            set(VERSION_MSG "(found suitable exact version \"${_FOUND_VERSION}\")")
-          endif ()
-        endif ()
-        unset(_VERSION_DOTS)
-
-      else()     # minimum version specified:
-        if (${_NAME}_FIND_VERSION VERSION_GREATER _FOUND_VERSION)
-          set(VERSION_MSG "Found unsuitable version \"${_FOUND_VERSION}\", but required is at least \"${${_NAME}_FIND_VERSION}\"")
-          set(VERSION_OK FALSE)
-        else ()
-          set(VERSION_MSG "(found suitable version \"${_FOUND_VERSION}\", minimum required is \"${${_NAME}_FIND_VERSION}\")")
-        endif ()
-      endif()
-
-    else()
-
-      # if the package was not found, but a version was given, add that to the output:
-      if(${_NAME}_FIND_VERSION_EXACT)
-         set(VERSION_MSG "(Required is exact version \"${${_NAME}_FIND_VERSION}\")")
-      else()
-         set(VERSION_MSG "(Required is at least version \"${${_NAME}_FIND_VERSION}\")")
-      endif()
-
-    endif()
-  else ()
-    # Check with DEFINED as the found version may be 0.
-    if(DEFINED ${FPHSA_VERSION_VAR})
-      set(VERSION_MSG "(found version \"${${FPHSA_VERSION_VAR}}\")")
-    endif()
-  endif ()
-
-  if(VERSION_OK)
-    string(APPEND DETAILS "[v${${FPHSA_VERSION_VAR}}(${${_NAME}_FIND_VERSION})]")
-  else()
-    set(${_NAME}_FOUND FALSE)
-  endif()
-
-
-  # print the result:
-  if (${_NAME}_FOUND)
-    FIND_PACKAGE_MESSAGE_SLIC3R(${_NAME} "Found ${_NAME}: ${${_FIRST_REQUIRED_VAR}} ${VERSION_MSG} ${COMPONENT_MSG}" "${DETAILS}")
-  else ()
-
-    if(FPHSA_CONFIG_MODE)
-      _FPHSA_HANDLE_FAILURE_CONFIG_MODE()
-    else()
-      if(NOT VERSION_OK)
-        _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: ${VERSION_MSG} (found ${${_FIRST_REQUIRED_VAR}})")
-      else()
-        _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE} (missing:${MISSING_VARS}) ${VERSION_MSG}")
-      endif()
-    endif()
-
-  endif ()
-
-  set(${_NAME}_FOUND ${${_NAME}_FOUND} PARENT_SCOPE)
-  set(${_NAME_UPPER}_FOUND ${${_NAME}_FOUND} PARENT_SCOPE)
-endfunction()

cmake/modules/FindPackageMessage_SLIC3R.cmake

@@ -1,54 +0,0 @@
-# Modified from the CMake github master.
-# required by the bundled FindCURL.cmake
-
-
-
-
-
-# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
-# file Copyright.txt or https://cmake.org/licensing for details.
-
-#.rst:
-# FindPackageMessage
-# ------------------
-#
-#
-#
-# FIND_PACKAGE_MESSAGE(<name> "message for user" "find result details")
-#
-# This macro is intended to be used in FindXXX.cmake modules files.  It
-# will print a message once for each unique find result.  This is useful
-# for telling the user where a package was found.  The first argument
-# specifies the name (XXX) of the package.  The second argument
-# specifies the message to display.  The third argument lists details
-# about the find result so that if they change the message will be
-# displayed again.  The macro also obeys the QUIET argument to the
-# find_package command.
-#
-# Example:
-#
-# ::
-#
-#   if(X11_FOUND)
-#     FIND_PACKAGE_MESSAGE(X11 "Found X11: ${X11_X11_LIB}"
-#       "[${X11_X11_LIB}][${X11_INCLUDE_DIR}]")
-#   else()
-#    ...
-#   endif()
-
-function(FIND_PACKAGE_MESSAGE_SLIC3R pkg msg details)
-  # Avoid printing a message repeatedly for the same find result.
-  if(NOT ${pkg}_FIND_QUIETLY)
-    string(REPLACE "\n" "" details "${details}")
-    set(DETAILS_VAR FIND_PACKAGE_MESSAGE_DETAILS_${pkg})
-    if(NOT "${details}" STREQUAL "${${DETAILS_VAR}}")
-      # The message has not yet been printed.
-      message(STATUS "${msg}")
-
-      # Save the find details in the cache to avoid printing the same
-      # message again.
-      set("${DETAILS_VAR}" "${details}"
-        CACHE INTERNAL "Details about finding ${pkg}")
-    endif()
-  endif()
-endfunction()

cmake/modules/FindTBB.cmake

@@ -1,20 +1,322 @@
-# ported from PrusaSlicer
-set(_q "")
-if(${CMAKE_FIND_PACKAGE_NAME}_FIND_QUIETLY)
-    set(_q QUIET)
-endif()
+# The MIT License (MIT)
+#
+# Copyright (c) 2015 Justus Calvin
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included in all
+# copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
 
+#
+# FindTBB
+# -------
+#
+# Find TBB include directories and libraries.
+#
+# Usage:
+#
+#  find_package(TBB [major[.minor]] [EXACT]
+#               [QUIET] [REQUIRED]
+#               [[COMPONENTS] [components...]]
+#               [OPTIONAL_COMPONENTS components...]) 
+#
+# where the allowed components are tbbmalloc and tbb_preview. Users may modify 
+# the behavior of this module with the following variables:
+#
+# * TBB_ROOT_DIR          - The base directory the of TBB installation.
+# * TBB_INCLUDE_DIR       - The directory that contains the TBB headers files.
+# * TBB_LIBRARY           - The directory that contains the TBB library files.
+# * TBB_<library>_LIBRARY - The path of the TBB the corresponding TBB library. 
+#                           These libraries, if specified, override the 
+#                           corresponding library search results, where <library>
+#                           may be tbb, tbb_debug, tbbmalloc, tbbmalloc_debug,
+#                           tbb_preview, or tbb_preview_debug.
+# * TBB_USE_DEBUG_BUILD   - The debug version of tbb libraries, if present, will
+#                           be used instead of the release version.
+# * TBB_STATIC            - Static linking of libraries with a _static suffix.
+#                           For example, on Windows a tbb_static.lib will be searched for
+#                           instead of tbb.lib.
+#
+# Users may modify the behavior of this module with the following environment
+# variables:
+#
+# * TBB_INSTALL_DIR 
+# * TBBROOT
+# * LIBRARY_PATH
+#
+# This module will set the following variables:
+#
+# * TBB_FOUND             - Set to false, or undefined, if we haven’t found, or
+#                           don’t want to use TBB.
+# * TBB_<component>_FOUND - If False, optional <component> part of TBB sytem is
+#                           not available.
+# * TBB_VERSION           - The full version string
+# * TBB_VERSION_MAJOR     - The major version
+# * TBB_VERSION_MINOR     - The minor version
+# * TBB_INTERFACE_VERSION - The interface version number defined in 
+#                           tbb/tbb_stddef.h.
+# * TBB_<library>_LIBRARY_RELEASE - The path of the TBB release version of 
+#                           <library>, where <library> may be tbb, tbb_debug,
+#                           tbbmalloc, tbbmalloc_debug, tbb_preview, or 
+#                           tbb_preview_debug.
+# * TBB_<library>_LIBRARY_DEGUG - The path of the TBB release version of 
+#                           <library>, where <library> may be tbb, tbb_debug,
+#                           tbbmalloc, tbbmalloc_debug, tbb_preview, or 
+#                           tbb_preview_debug.
+#
+# The following varibles should be used to build and link with TBB:
+#
+# * TBB_INCLUDE_DIRS        - The include directory for TBB.
+# * TBB_LIBRARIES           - The libraries to link against to use TBB.
+# * TBB_LIBRARIES_RELEASE   - The release libraries to link against to use TBB.
+# * TBB_LIBRARIES_DEBUG     - The debug libraries to link against to use TBB.
+# * TBB_DEFINITIONS         - Definitions to use when compiling code that uses
+#                             TBB.
+# * TBB_DEFINITIONS_RELEASE - Definitions to use when compiling release code that
+#                             uses TBB.
+# * TBB_DEFINITIONS_DEBUG   - Definitions to use when compiling debug code that
+#                             uses TBB.
+#
+# This module will also create the "tbb" target that may be used when building
+# executables and libraries.
 
-find_package(${CMAKE_FIND_PACKAGE_NAME} ${${CMAKE_FIND_PACKAGE_NAME}_FIND_VERSION} CONFIG ${_q})
+include(FindPackageHandleStandardArgs)
 
-if(NOT ${CMAKE_FIND_PACKAGE_NAME}_FIND_QUIETLY)
-    if (NOT ${CMAKE_FIND_PACKAGE_NAME}_FOUND)
-        message(STATUS "Falling back to MODULE search for ${CMAKE_FIND_PACKAGE_NAME}...")
+if(NOT TBB_FOUND)
+
+  ##################################
+  # Check the build type
+  ##################################
+  
+  if(NOT DEFINED TBB_USE_DEBUG_BUILD)
+    if(CMAKE_BUILD_TYPE MATCHES "(Debug|DEBUG|debug)")
+      set(TBB_BUILD_TYPE DEBUG)
     else()
-        message(STATUS "${CMAKE_FIND_PACKAGE_NAME} found in ${${CMAKE_FIND_PACKAGE_NAME}_DIR}")
+      set(TBB_BUILD_TYPE RELEASE)
     endif()
-endif()
+  elseif(TBB_USE_DEBUG_BUILD)
+    set(TBB_BUILD_TYPE DEBUG)
+  else()
+    set(TBB_BUILD_TYPE RELEASE)
+  endif()
+  
+  ##################################
+  # Set the TBB search directories
+  ##################################
+  
+  # Define search paths based on user input and environment variables
+  set(TBB_SEARCH_DIR ${TBB_ROOT_DIR} $ENV{TBB_INSTALL_DIR} $ENV{TBBROOT})
+  
+  # Define the search directories based on the current platform
+  if(CMAKE_SYSTEM_NAME STREQUAL "Windows")
+    set(TBB_DEFAULT_SEARCH_DIR "C:/Program Files/Intel/TBB"
+                               "C:/Program Files (x86)/Intel/TBB")
 
-if (NOT ${CMAKE_FIND_PACKAGE_NAME}_FOUND)
-    include(${CMAKE_CURRENT_LIST_DIR}/FindTBB.cmake.in)
-endif ()
+    # Set the target architecture
+    if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+      set(TBB_ARCHITECTURE "intel64")
+    else()
+      set(TBB_ARCHITECTURE "ia32")
+    endif()
+
+    # Set the TBB search library path search suffix based on the version of VC
+    if(WINDOWS_STORE)
+      set(TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc11_ui")
+    elseif(MSVC14)
+      set(TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc14")
+    elseif(MSVC12)
+      set(TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc12")
+    elseif(MSVC11)
+      set(TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc11")
+    elseif(MSVC10)
+      set(TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc10")
+    endif()
+
+    # Add the library path search suffix for the VC independent version of TBB
+    list(APPEND TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc_mt")
+
+  elseif(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+    # OS X
+    set(TBB_DEFAULT_SEARCH_DIR "/opt/intel/tbb")
+    
+    # TODO: Check to see which C++ library is being used by the compiler.
+    if(NOT ${CMAKE_SYSTEM_VERSION} VERSION_LESS 13.0)
+      # The default C++ library on OS X 10.9 and later is libc++
+      set(TBB_LIB_PATH_SUFFIX "lib/libc++" "lib")
+    else()
+      set(TBB_LIB_PATH_SUFFIX "lib")
+    endif()
+  elseif(CMAKE_SYSTEM_NAME STREQUAL "Linux")
+    # Linux
+    set(TBB_DEFAULT_SEARCH_DIR "/opt/intel/tbb")
+    
+    # TODO: Check compiler version to see the suffix should be <arch>/gcc4.1 or
+    #       <arch>/gcc4.1. For now, assume that the compiler is more recent than
+    #       gcc 4.4.x or later.
+    if(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
+      set(TBB_LIB_PATH_SUFFIX "lib/intel64/gcc4.4")
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^i.86$")
+      set(TBB_LIB_PATH_SUFFIX "lib/ia32/gcc4.4")
+    endif()
+  endif()
+  
+  ##################################
+  # Find the TBB include dir
+  ##################################
+  
+  find_path(TBB_INCLUDE_DIRS tbb/tbb.h
+      HINTS ${TBB_INCLUDE_DIR} ${TBB_SEARCH_DIR}
+      PATHS ${TBB_DEFAULT_SEARCH_DIR}
+      PATH_SUFFIXES include)
+
+  ##################################
+  # Set version strings
+  ##################################
+
+  if(TBB_INCLUDE_DIRS)
+    file(READ "${TBB_INCLUDE_DIRS}/tbb/tbb_stddef.h" _tbb_version_file)
+    string(REGEX REPLACE ".*#define TBB_VERSION_MAJOR ([0-9]+).*" "\\1"
+        TBB_VERSION_MAJOR "${_tbb_version_file}")
+    string(REGEX REPLACE ".*#define TBB_VERSION_MINOR ([0-9]+).*" "\\1"
+        TBB_VERSION_MINOR "${_tbb_version_file}")
+    string(REGEX REPLACE ".*#define TBB_INTERFACE_VERSION ([0-9]+).*" "\\1"
+        TBB_INTERFACE_VERSION "${_tbb_version_file}")
+    set(TBB_VERSION "${TBB_VERSION_MAJOR}.${TBB_VERSION_MINOR}")
+  endif()
+
+  ##################################
+  # Find TBB components
+  ##################################
+
+  if(TBB_VERSION VERSION_LESS 4.3)
+    set(TBB_SEARCH_COMPOMPONENTS tbb_preview tbbmalloc tbb)
+  else()
+    set(TBB_SEARCH_COMPOMPONENTS tbb_preview tbbmalloc_proxy tbbmalloc tbb)
+  endif()
+
+  if(TBB_STATIC)
+    set(TBB_STATIC_SUFFIX "_static")
+  endif()
+
+  # Find each component
+  foreach(_comp ${TBB_SEARCH_COMPOMPONENTS})
+    if(";${TBB_FIND_COMPONENTS};tbb;" MATCHES ";${_comp};")
+
+      # Search for the libraries
+      find_library(TBB_${_comp}_LIBRARY_RELEASE ${_comp}${TBB_STATIC_SUFFIX}
+          HINTS ${TBB_LIBRARY} ${TBB_SEARCH_DIR}
+          PATHS ${TBB_DEFAULT_SEARCH_DIR} ENV LIBRARY_PATH
+          PATH_SUFFIXES ${TBB_LIB_PATH_SUFFIX})
+
+      find_library(TBB_${_comp}_LIBRARY_DEBUG ${_comp}${TBB_STATIC_SUFFIX}_debug
+          HINTS ${TBB_LIBRARY} ${TBB_SEARCH_DIR}
+          PATHS ${TBB_DEFAULT_SEARCH_DIR} ENV LIBRARY_PATH
+          PATH_SUFFIXES ${TBB_LIB_PATH_SUFFIX})
+
+      if(TBB_${_comp}_LIBRARY_DEBUG)
+        list(APPEND TBB_LIBRARIES_DEBUG "${TBB_${_comp}_LIBRARY_DEBUG}")
+      endif()
+      if(TBB_${_comp}_LIBRARY_RELEASE)
+        list(APPEND TBB_LIBRARIES_RELEASE "${TBB_${_comp}_LIBRARY_RELEASE}")
+      endif()
+      if(TBB_${_comp}_LIBRARY_${TBB_BUILD_TYPE} AND NOT TBB_${_comp}_LIBRARY)
+        set(TBB_${_comp}_LIBRARY "${TBB_${_comp}_LIBRARY_${TBB_BUILD_TYPE}}")
+      endif()
+
+      if(TBB_${_comp}_LIBRARY AND EXISTS "${TBB_${_comp}_LIBRARY}")
+        set(TBB_${_comp}_FOUND TRUE)
+      else()
+        set(TBB_${_comp}_FOUND FALSE)
+      endif()
+
+      # Mark internal variables as advanced
+      mark_as_advanced(TBB_${_comp}_LIBRARY_RELEASE)
+      mark_as_advanced(TBB_${_comp}_LIBRARY_DEBUG)
+      mark_as_advanced(TBB_${_comp}_LIBRARY)
+
+    endif()
+  endforeach()
+
+  unset(TBB_STATIC_SUFFIX)
+
+  ##################################
+  # Set compile flags and libraries
+  ##################################
+
+  set(TBB_DEFINITIONS_RELEASE "")
+  set(TBB_DEFINITIONS_DEBUG "-DTBB_USE_DEBUG=1")
+    
+  if(TBB_LIBRARIES_${TBB_BUILD_TYPE})
+    set(TBB_DEFINITIONS "${TBB_DEFINITIONS_${TBB_BUILD_TYPE}}")
+    set(TBB_LIBRARIES "${TBB_LIBRARIES_${TBB_BUILD_TYPE}}")
+  elseif(TBB_LIBRARIES_RELEASE)
+    set(TBB_DEFINITIONS "${TBB_DEFINITIONS_RELEASE}")
+    set(TBB_LIBRARIES "${TBB_LIBRARIES_RELEASE}")
+  elseif(TBB_LIBRARIES_DEBUG)
+    set(TBB_DEFINITIONS "${TBB_DEFINITIONS_DEBUG}")
+    set(TBB_LIBRARIES "${TBB_LIBRARIES_DEBUG}")
+  endif()
+
+  find_package_handle_standard_args(TBB 
+      REQUIRED_VARS TBB_INCLUDE_DIRS TBB_LIBRARIES
+      HANDLE_COMPONENTS
+      VERSION_VAR TBB_VERSION)
+
+  ##################################
+  # Create targets
+  ##################################
+
+  if(NOT CMAKE_VERSION VERSION_LESS 3.0 AND TBB_FOUND)
+    add_library(tbb SHARED IMPORTED)
+    set_target_properties(tbb PROPERTIES
+          INTERFACE_INCLUDE_DIRECTORIES  ${TBB_INCLUDE_DIRS}
+          IMPORTED_LOCATION              ${TBB_LIBRARIES})
+    if(TBB_LIBRARIES_RELEASE AND TBB_LIBRARIES_DEBUG)
+      set_target_properties(tbb PROPERTIES
+          INTERFACE_COMPILE_DEFINITIONS "$<$<OR:$<CONFIG:Debug>,$<CONFIG:RelWithDebInfo>>:TBB_USE_DEBUG=1>"
+          IMPORTED_LOCATION_DEBUG          ${TBB_LIBRARIES_DEBUG}
+          IMPORTED_LOCATION_RELWITHDEBINFO ${TBB_LIBRARIES_DEBUG}
+          IMPORTED_LOCATION_RELEASE        ${TBB_LIBRARIES_RELEASE}
+          IMPORTED_LOCATION_MINSIZEREL     ${TBB_LIBRARIES_RELEASE}
+          )
+    elseif(TBB_LIBRARIES_RELEASE)
+      set_target_properties(tbb PROPERTIES IMPORTED_LOCATION ${TBB_LIBRARIES_RELEASE})
+    else()
+      set_target_properties(tbb PROPERTIES
+          INTERFACE_COMPILE_DEFINITIONS "${TBB_DEFINITIONS_DEBUG}"
+          IMPORTED_LOCATION              ${TBB_LIBRARIES_DEBUG}
+          )
+    endif()
+  endif()
+
+  mark_as_advanced(TBB_INCLUDE_DIRS TBB_LIBRARIES)
+
+  unset(TBB_ARCHITECTURE)
+  unset(TBB_BUILD_TYPE)
+  unset(TBB_LIB_PATH_SUFFIX)
+  unset(TBB_DEFAULT_SEARCH_DIR)
+
+  if(TBB_DEBUG)
+    message(STATUS "  TBB_INCLUDE_DIRS        = ${TBB_INCLUDE_DIRS}")
+    message(STATUS "  TBB_DEFINITIONS         = ${TBB_DEFINITIONS}")
+    message(STATUS "  TBB_LIBRARIES           = ${TBB_LIBRARIES}")
+    message(STATUS "  TBB_DEFINITIONS_DEBUG   = ${TBB_DEFINITIONS_DEBUG}")
+    message(STATUS "  TBB_LIBRARIES_DEBUG     = ${TBB_LIBRARIES_DEBUG}")
+    message(STATUS "  TBB_DEFINITIONS_RELEASE = ${TBB_DEFINITIONS_RELEASE}")
+    message(STATUS "  TBB_LIBRARIES_RELEASE   = ${TBB_LIBRARIES_RELEASE}")
+  endif()
+
+endif()

cmake/modules/FindTBB.cmake.in

@@ -1,332 +0,0 @@
-# The MIT License (MIT)
-#
-# Copyright (c) 2015 Justus Calvin
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-# 
-# The above copyright notice and this permission notice shall be included in all
-# copies or substantial portions of the Software.
-# 
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-# SOFTWARE.
-
-#
-# FindTBB
-# -------
-#
-# Find TBB include directories and libraries.
-#
-# Usage:
-#
-#  find_package(TBB [major[.minor]] [EXACT]
-#               [QUIET] [REQUIRED]
-#               [[COMPONENTS] [components...]]
-#               [OPTIONAL_COMPONENTS components...]) 
-#
-# where the allowed components are tbbmalloc and tbb_preview. Users may modify 
-# the behavior of this module with the following variables:
-#
-# * TBB_ROOT_DIR          - The base directory the of TBB installation.
-# * TBB_INCLUDE_DIR       - The directory that contains the TBB headers files.
-# * TBB_LIBRARY           - The directory that contains the TBB library files.
-# * TBB_<library>_LIBRARY - The path of the TBB the corresponding TBB library. 
-#                           These libraries, if specified, override the 
-#                           corresponding library search results, where <library>
-#                           may be tbb, tbb_debug, tbbmalloc, tbbmalloc_debug,
-#                           tbb_preview, or tbb_preview_debug.
-# * TBB_USE_DEBUG_BUILD   - The debug version of tbb libraries, if present, will
-#                           be used instead of the release version.
-# * TBB_STATIC            - Static linking of libraries with a _static suffix.
-#                           For example, on Windows a tbb_static.lib will be searched for
-#                           instead of tbb.lib.
-#
-# Users may modify the behavior of this module with the following environment
-# variables:
-#
-# * TBB_INSTALL_DIR 
-# * TBBROOT
-# * LIBRARY_PATH
-#
-# This module will set the following variables:
-#
-# * TBB_FOUND             - Set to false, or undefined, if we haven’t found, or
-#                           don’t want to use TBB.
-# * TBB_<component>_FOUND - If False, optional <component> part of TBB system is
-#                           not available.
-# * TBB_VERSION           - The full version string
-# * TBB_VERSION_MAJOR     - The major version
-# * TBB_VERSION_MINOR     - The minor version
-# * TBB_INTERFACE_VERSION - The interface version number defined in 
-#                           tbb/tbb_stddef.h.
-# * TBB_<library>_LIBRARY_RELEASE - The path of the TBB release version of 
-#                           <library>, where <library> may be tbb, tbb_debug,
-#                           tbbmalloc, tbbmalloc_debug, tbb_preview, or 
-#                           tbb_preview_debug.
-# * TBB_<library>_LIBRARY_DEGUG - The path of the TBB release version of 
-#                           <library>, where <library> may be tbb, tbb_debug,
-#                           tbbmalloc, tbbmalloc_debug, tbb_preview, or 
-#                           tbb_preview_debug.
-#
-# The following variables should be used to build and link with TBB:
-#
-# * TBB_INCLUDE_DIRS        - The include directory for TBB.
-# * TBB_LIBRARIES           - The libraries to link against to use TBB.
-# * TBB_LIBRARIES_RELEASE   - The release libraries to link against to use TBB.
-# * TBB_LIBRARIES_DEBUG     - The debug libraries to link against to use TBB.
-# * TBB_DEFINITIONS         - Definitions to use when compiling code that uses
-#                             TBB.
-# * TBB_DEFINITIONS_RELEASE - Definitions to use when compiling release code that
-#                             uses TBB.
-# * TBB_DEFINITIONS_DEBUG   - Definitions to use when compiling debug code that
-#                             uses TBB.
-#
-# This module will also create the "tbb" target that may be used when building
-# executables and libraries.
-
-unset(TBB_FOUND CACHE)
-unset(TBB_INCLUDE_DIRS CACHE)
-unset(TBB_LIBRARIES)
-unset(TBB_LIBRARIES_DEBUG)
-unset(TBB_LIBRARIES_RELEASE)
-
-include(FindPackageHandleStandardArgs)
-
-find_package(Threads QUIET REQUIRED)
-
-if(NOT TBB_FOUND)
-
-  ##################################
-  # Check the build type
-  ##################################
-  
-  if(NOT DEFINED TBB_USE_DEBUG_BUILD)
-    if(CMAKE_BUILD_TYPE MATCHES "(Debug|DEBUG|debug)")
-      set(TBB_BUILD_TYPE DEBUG)
-    else()
-      set(TBB_BUILD_TYPE RELEASE)
-    endif()
-  elseif(TBB_USE_DEBUG_BUILD)
-    set(TBB_BUILD_TYPE DEBUG)
-  else()
-    set(TBB_BUILD_TYPE RELEASE)
-  endif()
-  
-  ##################################
-  # Set the TBB search directories
-  ##################################
-  
-  # Define search paths based on user input and environment variables
-  set(TBB_SEARCH_DIR ${TBB_ROOT_DIR} $ENV{TBB_INSTALL_DIR} $ENV{TBBROOT})
-  
-  # Define the search directories based on the current platform
-  if(CMAKE_SYSTEM_NAME STREQUAL "Windows")
-    set(TBB_DEFAULT_SEARCH_DIR "C:/Program Files/Intel/TBB"
-                               "C:/Program Files (x86)/Intel/TBB")
-
-    # Set the target architecture
-    if(CMAKE_SIZEOF_VOID_P EQUAL 8)
-      set(TBB_ARCHITECTURE "intel64")
-    else()
-      set(TBB_ARCHITECTURE "ia32")
-    endif()
-
-    # Set the TBB search library path search suffix based on the version of VC
-    if(WINDOWS_STORE)
-      set(TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc11_ui")
-    elseif(MSVC14)
-      set(TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc14")
-    elseif(MSVC12)
-      set(TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc12")
-    elseif(MSVC11)
-      set(TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc11")
-    elseif(MSVC10)
-      set(TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc10")
-    endif()
-
-    # Add the library path search suffix for the VC independent version of TBB
-    list(APPEND TBB_LIB_PATH_SUFFIX "lib/${TBB_ARCHITECTURE}/vc_mt")
-
-  elseif(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
-    # OS X
-    set(TBB_DEFAULT_SEARCH_DIR "/opt/intel/tbb")
-    
-    # TODO: Check to see which C++ library is being used by the compiler.
-    if(NOT ${CMAKE_SYSTEM_VERSION} VERSION_LESS 13.0)
-      # The default C++ library on OS X 10.9 and later is libc++
-      set(TBB_LIB_PATH_SUFFIX "lib/libc++" "lib")
-    else()
-      set(TBB_LIB_PATH_SUFFIX "lib")
-    endif()
-  elseif(CMAKE_SYSTEM_NAME STREQUAL "Linux")
-    # Linux
-    set(TBB_DEFAULT_SEARCH_DIR "/opt/intel/tbb")
-    
-    # TODO: Check compiler version to see the suffix should be <arch>/gcc4.1 or
-    #       <arch>/gcc4.1. For now, assume that the compiler is more recent than
-    #       gcc 4.4.x or later.
-    if(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
-      set(TBB_LIB_PATH_SUFFIX "lib/intel64/gcc4.4")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^i.86$")
-      set(TBB_LIB_PATH_SUFFIX "lib/ia32/gcc4.4")
-    endif()
-  endif()
-  
-  ##################################
-  # Find the TBB include dir
-  ##################################
-  
-  find_path(TBB_INCLUDE_DIRS tbb/tbb.h
-      HINTS ${TBB_INCLUDE_DIR} ${TBB_SEARCH_DIR}
-      PATHS ${TBB_DEFAULT_SEARCH_DIR}
-      PATH_SUFFIXES include)
-
-  ##################################
-  # Set version strings
-  ##################################
-
-  if(TBB_INCLUDE_DIRS)
-    file(READ "${TBB_INCLUDE_DIRS}/tbb/tbb_stddef.h" _tbb_version_file)
-    string(REGEX REPLACE ".*#define TBB_VERSION_MAJOR ([0-9]+).*" "\\1"
-        TBB_VERSION_MAJOR "${_tbb_version_file}")
-    string(REGEX REPLACE ".*#define TBB_VERSION_MINOR ([0-9]+).*" "\\1"
-        TBB_VERSION_MINOR "${_tbb_version_file}")
-    string(REGEX REPLACE ".*#define TBB_INTERFACE_VERSION ([0-9]+).*" "\\1"
-        TBB_INTERFACE_VERSION "${_tbb_version_file}")
-    set(TBB_VERSION "${TBB_VERSION_MAJOR}.${TBB_VERSION_MINOR}")
-  endif()
-
-  ##################################
-  # Find TBB components
-  ##################################
-
-  if(TBB_VERSION VERSION_LESS 4.3)
-    set(TBB_SEARCH_COMPOMPONENTS tbb_preview tbbmalloc tbb)
-  else()
-    set(TBB_SEARCH_COMPOMPONENTS tbb_preview tbbmalloc_proxy tbbmalloc tbb)
-  endif()
-
-  if(TBB_STATIC)
-    set(TBB_STATIC_SUFFIX "_static")
-  endif()
-
-  # Find each component
-  foreach(_comp ${TBB_SEARCH_COMPOMPONENTS})
-    if(";${TBB_FIND_COMPONENTS};tbb;" MATCHES ";${_comp};")
-
-      unset(TBB_${_comp}_LIBRARY_DEBUG CACHE)
-      unset(TBB_${_comp}_LIBRARY_RELEASE CACHE)
-
-      # Search for the libraries
-      find_library(TBB_${_comp}_LIBRARY_RELEASE ${_comp}${TBB_STATIC_SUFFIX}
-          HINTS ${TBB_LIBRARY} ${TBB_SEARCH_DIR}
-          PATHS ${TBB_DEFAULT_SEARCH_DIR} ENV LIBRARY_PATH
-          PATH_SUFFIXES ${TBB_LIB_PATH_SUFFIX})
-
-      find_library(TBB_${_comp}_LIBRARY_DEBUG ${_comp}${TBB_STATIC_SUFFIX}_debug
-          HINTS ${TBB_LIBRARY} ${TBB_SEARCH_DIR}
-          PATHS ${TBB_DEFAULT_SEARCH_DIR} ENV LIBRARY_PATH
-          PATH_SUFFIXES ${TBB_LIB_PATH_SUFFIX})
-
-      if(TBB_${_comp}_LIBRARY_DEBUG)
-        list(APPEND TBB_LIBRARIES_DEBUG "${TBB_${_comp}_LIBRARY_DEBUG}")
-      endif()
-      if(TBB_${_comp}_LIBRARY_RELEASE)
-        list(APPEND TBB_LIBRARIES_RELEASE "${TBB_${_comp}_LIBRARY_RELEASE}")
-      endif()
-      if(TBB_${_comp}_LIBRARY_${TBB_BUILD_TYPE} AND NOT TBB_${_comp}_LIBRARY)
-        set(TBB_${_comp}_LIBRARY "${TBB_${_comp}_LIBRARY_${TBB_BUILD_TYPE}}")
-      endif()
-
-      if(TBB_${_comp}_LIBRARY AND EXISTS "${TBB_${_comp}_LIBRARY}")
-        set(TBB_${_comp}_FOUND TRUE)
-      else()
-        set(TBB_${_comp}_FOUND FALSE)
-      endif()
-
-      # Mark internal variables as advanced
-      mark_as_advanced(TBB_${_comp}_LIBRARY_RELEASE)
-      mark_as_advanced(TBB_${_comp}_LIBRARY_DEBUG)
-      mark_as_advanced(TBB_${_comp}_LIBRARY)
-
-    endif()
-  endforeach()
-
-  ##################################
-  # Set compile flags and libraries
-  ##################################
-
-  set(TBB_DEFINITIONS_RELEASE "")
-  set(TBB_DEFINITIONS_DEBUG "TBB_USE_DEBUG=1")
-    
-  if(TBB_LIBRARIES_${TBB_BUILD_TYPE})
-    set(TBB_LIBRARIES "${TBB_LIBRARIES_${TBB_BUILD_TYPE}}")
-  endif()
-  
-  if(NOT MSVC AND NOT TBB_LIBRARIES)
-    set(TBB_LIBRARIES ${TBB_LIBRARIES_RELEASE})
-  endif()
-
-  set(TBB_DEFINITIONS "")
-  if (MSVC AND TBB_STATIC)
-    set(TBB_DEFINITIONS __TBB_NO_IMPLICIT_LINKAGE)
-  endif ()
-
-  unset (TBB_STATIC_SUFFIX)
-
-  find_package_handle_standard_args(TBB 
-      REQUIRED_VARS TBB_INCLUDE_DIRS TBB_LIBRARIES
-      FAIL_MESSAGE "TBB library cannot be found. Consider set TBBROOT environment variable."
-      HANDLE_COMPONENTS
-      VERSION_VAR TBB_VERSION)
-
-  ##################################
-  # Create targets
-  ##################################
-
-  if(NOT CMAKE_VERSION VERSION_LESS 3.0 AND TBB_FOUND AND NOT TARGET TBB::tbb)
-    add_library(TBB::tbb UNKNOWN IMPORTED)
-    set_target_properties(TBB::tbb PROPERTIES
-          INTERFACE_COMPILE_DEFINITIONS "${TBB_DEFINITIONS}"
-          INTERFACE_LINK_LIBRARIES  "Threads::Threads;${CMAKE_DL_LIBS}"
-          INTERFACE_INCLUDE_DIRECTORIES  ${TBB_INCLUDE_DIRS}
-          IMPORTED_LOCATION              ${TBB_LIBRARIES})
-    if(TBB_LIBRARIES_RELEASE AND TBB_LIBRARIES_DEBUG)
-      set_target_properties(TBB::tbb PROPERTIES
-          INTERFACE_COMPILE_DEFINITIONS "${TBB_DEFINITIONS};$<$<OR:$<CONFIG:Release>,$<CONFIG:RelWithDebInfo>>:${TBB_DEFINITIONS_RELEASE}>;$<$<CONFIG:Debug>:${TBB_DEFINITIONS_DEBUG}>"
-          IMPORTED_LOCATION_DEBUG          ${TBB_LIBRARIES_DEBUG}
-          IMPORTED_LOCATION_RELWITHDEBINFO ${TBB_LIBRARIES_RELEASE}
-          IMPORTED_LOCATION_RELEASE        ${TBB_LIBRARIES_RELEASE}
-          IMPORTED_LOCATION_MINSIZEREL     ${TBB_LIBRARIES_RELEASE}
-          )
-    endif()
-  endif()
-
-  mark_as_advanced(TBB_INCLUDE_DIRS TBB_LIBRARIES)
-
-  unset(TBB_ARCHITECTURE)
-  unset(TBB_BUILD_TYPE)
-  unset(TBB_LIB_PATH_SUFFIX)
-  unset(TBB_DEFAULT_SEARCH_DIR)
-
-  if(TBB_DEBUG)
-    message(STATUS "  TBB_FOUND               = ${TBB_FOUND}")
-    message(STATUS "  TBB_INCLUDE_DIRS        = ${TBB_INCLUDE_DIRS}")
-    message(STATUS "  TBB_DEFINITIONS         = ${TBB_DEFINITIONS}")
-    message(STATUS "  TBB_LIBRARIES           = ${TBB_LIBRARIES}")
-    message(STATUS "  TBB_DEFINITIONS_DEBUG   = ${TBB_DEFINITIONS_DEBUG}")
-    message(STATUS "  TBB_LIBRARIES_DEBUG     = ${TBB_LIBRARIES_DEBUG}")
-    message(STATUS "  TBB_DEFINITIONS_RELEASE = ${TBB_DEFINITIONS_RELEASE}")
-    message(STATUS "  TBB_LIBRARIES_RELEASE   = ${TBB_LIBRARIES_RELEASE}")
-  endif()
-
-endif()

cmake/modules/Findcereal.cmake

@@ -1,26 +0,0 @@
-set(_q "")
-if(${CMAKE_FIND_PACKAGE_NAME}_FIND_QUIETLY)
-    set(_q QUIET)
-    set(_quietly TRUE)
-endif()
-find_package(${CMAKE_FIND_PACKAGE_NAME} ${${CMAKE_FIND_PACKAGE_NAME}_FIND_VERSION} CONFIG ${_q})
-
-if (NOT ${CMAKE_FIND_PACKAGE_NAME}_FOUND)
-    # Fall-back solution to find the Cereal serialization library header file
-    include(CheckIncludeFileCXX)
-    add_library(cereal INTERFACE)
-    target_include_directories(cereal INTERFACE include)
-
-    if (_quietly)
-        set(CMAKE_REQUIRED_QUIET ON)
-    endif()
-    CHECK_INCLUDE_FILE_CXX("cereal/cereal.hpp" HAVE_CEREAL_H)
-
-    if (NOT HAVE_CEREAL_H)
-        if (${CMAKE_FIND_PACKAGE_NAME}_FIND_REQUIRED)
-            message(FATAL_ERROR "Cereal library not found. Please install the dependency.")
-        elseif(NOT _quietly)
-            message(WARNING "Cereal library not found.")
-        endif()
-    endif ()
-endif()

cmake/modules/Findlibnoise.cmake

@@ -1,41 +0,0 @@
-find_path(LIBNOISE_INCLUDE_DIR libnoise/noise.h)
-find_library(LIBNOISE_LIBRARY_RELEASE NAMES libnoise libnoise_static liblibnoise_static)
-find_library(LIBNOISE_LIBRARY_DEBUG NAMES libnoised libnoise_staticd liblibnoise_staticd)
-
-set(libnoise_LIB_FOUND FALSE)
-if (LIBNOISE_LIBRARY_RELEASE OR LIBNOISE_LIBRARY_DEBUG)
-    set(libnoise_LIB_FOUND TRUE)
-endif ()
-
-include(FindPackageHandleStandardArgs)
-find_package_handle_standard_args(libnoise DEFAULT_MSG
-    libnoise_LIB_FOUND
-    LIBNOISE_INCLUDE_DIR
-)
-
-if(libnoise_FOUND)
-    add_library(noise::noise STATIC IMPORTED)
-
-    set_target_properties(noise::noise PROPERTIES
-            INTERFACE_INCLUDE_DIRECTORIES "${LIBNOISE_INCLUDE_DIR}"
-    )
-    if (NOT libnoise_FIND_QUIETLY)
-        message(STATUS "Found libnoise include directory: ${LIBNOISE_INCLUDE_DIR}")
-        if (LIBNOISE_LIBRARY_RELEASE)
-            message(STATUS "Found libnoise RELEASE library: ${LIBNOISE_LIBRARY_RELEASE}")
-        endif ()
-        if (LIBNOISE_LIBRARY_DEBUG)
-            message(STATUS "Found libnoise DEBUG library: ${LIBNOISE_LIBRARY_DEBUG}")
-        endif ()
-    endif ()
-
-    if (LIBNOISE_LIBRARY_RELEASE)
-        set_property(TARGET noise::noise APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE)
-        set_target_properties(noise::noise PROPERTIES IMPORTED_LOCATION_RELEASE ${LIBNOISE_LIBRARY_RELEASE})
-    endif ()
-
-    if (LIBNOISE_LIBRARY_DEBUG)
-        set_property(TARGET noise::noise APPEND PROPERTY IMPORTED_CONFIGURATIONS DEBUG)
-        set_target_properties(noise::noise PROPERTIES IMPORTED_LOCATION_DEBUG ${LIBNOISE_LIBRARY_DEBUG})
-    endif ()
-endif()

cmake/modules/MacOSXBundleInfo.plist.in

@@ -1,143 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
-<plist version="1.0">
-<dict>
-	<key>CFBundleDevelopmentRegion</key>
-	<string>English</string>
-	<key>CFBundleExecutable</key>
-	<string>${MACOSX_BUNDLE_EXECUTABLE_NAME}</string>
-	<key>CFBundleGetInfoString</key>
-	<string>${MACOSX_BUNDLE_INFO_STRING}</string>
-	<key>CFBundleIconFile</key>
-	<string>${MACOSX_BUNDLE_ICON_FILE}</string>
-	<key>CFBundleIdentifier</key>
-	<string>com.orcaslicer.OrcaSlicer</string>
-	<key>CFBundleInfoDictionaryVersion</key>
-	<string>6.0</string>
-	<key>CFBundleLongVersionString</key>
-	<string>${MACOSX_BUNDLE_LONG_VERSION_STRING}</string>
-	<key>CFBundleName</key>
-	<string>${MACOSX_BUNDLE_BUNDLE_NAME}</string>
-	<key>CFBundlePackageType</key>
-	<string>APPL</string>
-	<key>CFBundleShortVersionString</key>
-	<string>${MACOSX_BUNDLE_SHORT_VERSION_STRING}</string>
-	<key>CFBundleSignature</key>
-	<string>????</string>
-	<key>CFBundleVersion</key>
-	<string>${MACOSX_BUNDLE_BUNDLE_VERSION}</string>
-	<key>ATSApplicationFontsPath</key>
-  	<string>fonts/</string>
-  <key>CFBundleURLTypes</key>
-    <array>
-      <dict>
-        <key>CFBundleURLName</key>
-        <string>OrcaSlicer Downloads</string>
-        <key>CFBundleURLSchemes</key>
-        <array>
-          <string>orcaslicer</string>
-        </array>
-      </dict>
-    </array>
-	<key>CFBundleDocumentTypes</key>
-	<array>
-		<dict>
-			<key>CFBundleTypeExtensions</key>
-			<array>
-			<string>stl</string>
-			<string>STL</string>
-			</array>
-			<key>CFBundleTypeIconFile</key>
-			<string>images/stl.icns</string>
-			<key>CFBundleTypeName</key>
-			<string>STL</string>
-			<key>CFBundleTypeRole</key>
-			<string>Viewer</string>
-			<key>LISsAppleDefaultForType</key>
-			<true/>
-			<key>LSHandlerRank</key>
-			<string>Alternate</string>
-		</dict>
-		<dict>
-			<key>CFBundleTypeExtensions</key>
-			<array>
-			<string>obj</string>
-			<string>OBJ</string>
-			</array>
-			<key>CFBundleTypeIconFile</key>
-			<string>images/OrcaSlicer.icns</string>
-			<key>CFBundleTypeName</key>
-			<string>STL</string>
-			<key>CFBundleTypeRole</key>
-			<string>Viewer</string>
-			<key>LISsAppleDefaultForType</key>
-			<true/>
-			<key>LSHandlerRank</key>
-			<string>Alternate</string>
-		</dict>
-		<dict>
-			<key>CFBundleTypeExtensions</key>
-			<array>
-			<string>amf</string>
-			<string>AMF</string>
-			</array>
-			<key>CFBundleTypeIconFile</key>
-			<string>images/OrcaSlicer.icns</string>
-			<key>CFBundleTypeName</key>
-			<string>AMF</string>
-			<key>CFBundleTypeRole</key>
-			<string>Viewer</string>
-			<key>LISsAppleDefaultForType</key>
-			<true/>
-			<key>LSHandlerRank</key>
-			<string>Alternate</string>
-		</dict>
-		<dict>
-			<key>CFBundleTypeExtensions</key>
-			<array>
-			<string>3mf</string>
-			<string>3MF</string>
-			</array>
-			<key>CFBundleTypeIconFile</key>
-			<string>images/OrcaSlicer.icns</string>
-			<key>CFBundleTypeName</key>
-			<string>3MF</string>
-			<key>CFBundleTypeRole</key>
-			<string>Viewer</string>
-			<key>LISsAppleDefaultForType</key>
-			<true/>
-			<key>LSHandlerRank</key>
-			<string>Alternate</string>
-		</dict>
-		<dict>
-			<key>CFBundleTypeExtensions</key>
-			<array>
-			<string>gcode</string>
-			<string>GCODE</string>
-			</array>
-			<key>CFBundleTypeIconFile</key>
-			<string>images/gcode.icns</string>
-			<key>CFBundleTypeName</key>
-			<string>GCODE</string>
-			<key>CFBundleTypeRole</key>
-			<string>Viewer</string>
-			<key>LISsAppleDefaultForType</key>
-			<true/>
-			<key>LSHandlerRank</key>
-			<string>Alternate</string>
-		</dict>
-	</array>
-	<key>CSResourcesFileMapped</key>
-	<true/>
-	<key>NSHumanReadableCopyright</key>
-	<string>${MACOSX_BUNDLE_COPYRIGHT}</string>
-	<key>NSAppTransportSecurity</key>  
-	<dict>
-		<!-- Disable App Transport Security. Resolves https://github.com/OrcaSlicer/OrcaSlicer/issues/791 -->
-		<key>NSAllowsArbitraryLoads</key>
-		<true/>  
-		<key>NSAllowsArbitraryLoadsInWebContent</key>
-		<true/>
-	</dict>
-</dict>
-</plist>

cmake/modules/OpenVDBUtils.cmake

@@ -1,172 +0,0 @@
-# Copyright (c) DreamWorks Animation LLC
-#
-# All rights reserved. This software is distributed under the
-# Mozilla Public License 2.0 ( http://www.mozilla.org/MPL/2.0/ )
-#
-# Redistributions of source code must retain the above copyright
-# and license notice and the following restrictions and disclaimer.
-#
-# *     Neither the name of DreamWorks Animation nor the names of
-# its contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# IN NO EVENT SHALL THE COPYRIGHT HOLDERS' AND CONTRIBUTORS' AGGREGATE
-# LIABILITY FOR ALL CLAIMS REGARDLESS OF THEIR BASIS EXCEED US$250.00.
-#
-#[=======================================================================[.rst:
-
-OpenVDBUtils.cmake
-------------------
-
-A utility CMake file which provides helper functions for configuring an
-OpenVDB installation.
-
-Use this module by invoking include with the form::
-
-  include ( OpenVDBUtils )
-
-
-The following functions are provided:
-
-``OPENVDB_VERSION_FROM_HEADER``
-
-  OPENVDB_VERSION_FROM_HEADER ( <header_path>
-    VERSION [<version>]
-    MAJOR   [<version>]
-    MINOR   [<version>]
-    PATCH   [<version>] )
-
-  Parse the provided version file to retrieve the current OpenVDB
-  version information. The file is expected to be a version.h file
-  as found in the following path of an OpenVDB repository:
-    openvdb/version.h
-
-  If the file does not exist, variables are unmodified.
-
-``OPENVDB_ABI_VERSION_FROM_PRINT``
-
-  OPENVDB_ABI_VERSION_FROM_PRINT ( <vdb_print>
-    [QUIET]
-    ABI [<version>] )
-
-  Retrieve the ABI version that an installation of OpenVDB was compiled
-  for using the provided vdb_print binary. Parses the result of:
-    vdb_print --version
-
-  If the binary does not exist or fails to launch, variables are
-  unmodified.
-
-#]=======================================================================]
-
-
-function(OPENVDB_VERSION_FROM_HEADER OPENVDB_VERSION_FILE)
-  cmake_parse_arguments(_VDB "" "VERSION;MAJOR;MINOR;PATCH" "" ${ARGN})
-
-  if(NOT EXISTS ${OPENVDB_VERSION_FILE})
-    return()
-  endif()
-
-  file(STRINGS "${OPENVDB_VERSION_FILE}" openvdb_version_str
-    REGEX "^#define[\t ]+OPENVDB_LIBRARY_MAJOR_VERSION_NUMBER[\t ]+.*"
-  )
-  string(REGEX REPLACE "^.*OPENVDB_LIBRARY_MAJOR_VERSION_NUMBER[\t ]+([0-9]*).*$" "\\1"
-    _OpenVDB_MAJOR_VERSION "${openvdb_version_str}"
-  )
-
-  file(STRINGS "${OPENVDB_VERSION_FILE}" openvdb_version_str
-    REGEX "^#define[\t ]+OPENVDB_LIBRARY_MINOR_VERSION_NUMBER[\t ]+.*"
-  )
-  string(REGEX REPLACE "^.*OPENVDB_LIBRARY_MINOR_VERSION_NUMBER[\t ]+([0-9]*).*$" "\\1"
-    _OpenVDB_MINOR_VERSION "${openvdb_version_str}"
-  )
-
-  file(STRINGS "${OPENVDB_VERSION_FILE}" openvdb_version_str
-    REGEX "^#define[\t ]+OPENVDB_LIBRARY_PATCH_VERSION_NUMBER[\t ]+.*"
-  )
-  string(REGEX REPLACE "^.*OPENVDB_LIBRARY_PATCH_VERSION_NUMBER[\t ]+([0-9]*).*$" "\\1"
-    _OpenVDB_PATCH_VERSION "${openvdb_version_str}"
-  )
-  unset(openvdb_version_str)
-
-  if(_VDB_VERSION)
-    set(${_VDB_VERSION}
-      ${_OpenVDB_MAJOR_VERSION}.${_OpenVDB_MINOR_VERSION}.${_OpenVDB_PATCH_VERSION}
-      PARENT_SCOPE
-    )
-  endif()
-  if(_VDB_MAJOR)
-    set(${_VDB_MAJOR} ${_OpenVDB_MAJOR_VERSION} PARENT_SCOPE)
-  endif()
-  if(_VDB_MINOR)
-    set(${_VDB_MINOR} ${_OpenVDB_MINOR_VERSION} PARENT_SCOPE)
-  endif()
-  if(_VDB_PATCH)
-    set(${_VDB_PATCH} ${_OpenVDB_PATCH_VERSION} PARENT_SCOPE)
-  endif()
-endfunction()
-
-
-########################################################################
-########################################################################
-
-
-function(OPENVDB_ABI_VERSION_FROM_PRINT OPENVDB_PRINT)
-  cmake_parse_arguments(_VDB "QUIET" "ABI" "" ${ARGN})
-
-  if(NOT EXISTS ${OPENVDB_PRINT})
-    if(NOT OpenVDB_FIND_QUIETLY)
-      message(WARNING "vdb_print not found! ${OPENVDB_PRINT}")
-    endif()
-    return()
-  endif()
-
-  set(_VDB_PRINT_VERSION_STRING "")
-  set(_VDB_PRINT_RETURN_STATUS "")
-
-  if(${_VDB_QUIET})
-    execute_process(COMMAND ${OPENVDB_PRINT} "--version"
-      RESULT_VARIABLE _VDB_PRINT_RETURN_STATUS
-      OUTPUT_VARIABLE _VDB_PRINT_VERSION_STRING
-      ERROR_QUIET
-      OUTPUT_STRIP_TRAILING_WHITESPACE
-    )
-  else()
-    execute_process(COMMAND ${OPENVDB_PRINT} "--version"
-      RESULT_VARIABLE _VDB_PRINT_RETURN_STATUS
-      OUTPUT_VARIABLE _VDB_PRINT_VERSION_STRING
-      OUTPUT_STRIP_TRAILING_WHITESPACE
-    )
-  endif()
-
-  if(${_VDB_PRINT_RETURN_STATUS})
-    if(NOT OpenVDB_FIND_QUIETLY)
-      message(WARNING "vdb_print returned with status ${_VDB_PRINT_RETURN_STATUS}")
-    endif()
-    return()
-  endif()
-
-  set(_OpenVDB_ABI)
-  if (_VDB_PRINT_VERSION_STRING)
-    string(REGEX REPLACE ".*abi([0-9]*).*" "\\1" _OpenVDB_ABI ${_VDB_PRINT_VERSION_STRING})
-  endif ()
-  if(${_OpenVDB_ABI} STREQUAL ${_VDB_PRINT_VERSION_STRING})
-    set(_OpenVDB_ABI "")
-  endif()
-  unset(_VDB_PRINT_RETURN_STATUS)
-  unset(_VDB_PRINT_VERSION_STRING)
-
-  if(_VDB_ABI)
-    set(${_VDB_ABI} ${_OpenVDB_ABI} PARENT_SCOPE)
-  endif()
-endfunction()

cmake/modules/PrecompiledHeader.cmake

@@ -1,269 +0,0 @@
-# Function for setting up precompiled headers. Usage:
-#
-#   add_library/executable(target
-#       pchheader.c pchheader.cpp pchheader.h)
-#
-#   add_precompiled_header(target pchheader.h
-#       [FORCEINCLUDE]
-#       [SOURCE_C pchheader.c]
-#       [SOURCE_CXX pchheader.cpp])
-#
-# Options:
-#
-#   FORCEINCLUDE: Add compiler flags to automatically include the
-#   pchheader.h from every source file. Works with both GCC and
-#   MSVC. This is recommended.
-#
-#   SOURCE_C/CXX: Specifies the .c/.cpp source file that includes
-#   pchheader.h for generating the pre-compiled header
-#   output. Defaults to pchheader.c. Only required for MSVC.
-#
-# Caveats:
-#
-#   * Its not currently possible to use the same precompiled-header in
-#     more than a single target in the same directory (No way to set
-#     the source file properties differently for each target).
-#
-#   * MSVC: A source file with the same name as the header must exist
-#     and be included in the target (E.g. header.cpp). Name of file
-#     can be changed using the SOURCE_CXX/SOURCE_C options.
-#
-# License:
-#
-# Copyright (C) 2009-2017 Lars Christensen <larsch@belunktum.dk>
-#
-# Permission is hereby granted, free of charge, to any person
-# obtaining a copy of this software and associated documentation files
-# (the 'Software') deal in the Software without restriction,
-# including without limitation the rights to use, copy, modify, merge,
-# publish, distribute, sublicense, and/or sell copies of the Software,
-# and to permit persons to whom the Software is furnished to do so,
-# subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be
-# included in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND,
-# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
-# BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-# ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-# SOFTWARE.
-
-
-# Use the new builtin CMake function if possible or fall back to the old one.
-if (CMAKE_VERSION VERSION_LESS 3.16)
-
-include(CMakeParseArguments)
-
-macro(combine_arguments _variable)
-  set(_result "")
-  foreach(_element ${${_variable}})
-    set(_result "${_result} \"${_element}\"")
-  endforeach()
-  string(STRIP "${_result}" _result)
-  set(${_variable} "${_result}")
-endmacro()
-
-function(export_all_flags _filename)
-  set(_include_directories "$<TARGET_PROPERTY:${_target},INCLUDE_DIRECTORIES>")
-  set(_compile_definitions "$<TARGET_PROPERTY:${_target},COMPILE_DEFINITIONS>")
-  set(_compile_flags "$<TARGET_PROPERTY:${_target},COMPILE_FLAGS>")
-  set(_compile_options "$<TARGET_PROPERTY:${_target},COMPILE_OPTIONS>")
-
-  #handle config-specific cxx flags
-  string(TOUPPER ${CMAKE_BUILD_TYPE} _config)
-  set(_build_cxx_flags ${CMAKE_CXX_FLAGS_${_config}})
-
-  #handle fpie option
-  get_target_property(_fpie ${_target} POSITION_INDEPENDENT_CODE)
-  if (_fpie AND CMAKE_POSITION_INDEPENDENT_CODE)
-    list(APPEND _compile_options ${CMAKE_CXX_COMPILE_OPTIONS_PIC})
-  endif()
-
-  #handle compiler standard (GCC only)
-  if(CMAKE_COMPILER_IS_GNUCXX)
-    get_target_property(_cxx_standard ${_target} CXX_STANDARD)
-    if ((NOT "${_cxx_standard}" STREQUAL NOTFOUND) AND (NOT "${_cxx_standard}" STREQUAL ""))
-      get_target_property(_cxx_extensions ${_target} CXX_EXTENSIONS)
-      get_property(_exists TARGET ${_target} PROPERTY CXX_EXTENSIONS SET)
-      if (NOT _exists OR ${_cxx_extensions})
-        list(APPEND _compile_options "-std=gnu++${_cxx_standard}")
-      else()
-        list(APPEND _compile_options "-std=c++${_cxx_standard}")
-      endif()
-    endif()
-  endif()
-
-  set(_include_directories "$<$<BOOL:${_include_directories}>:-I$<JOIN:${_include_directories},\n-I>\n>")
-  set(_compile_definitions "$<$<BOOL:${_compile_definitions}>:-D$<JOIN:${_compile_definitions},\n-D>\n>")
-  set(_compile_flags "$<$<BOOL:${_compile_flags}>:$<JOIN:${_compile_flags},\n>\n>")
-  set(_compile_options "$<$<BOOL:${_compile_options}>:$<JOIN:${_compile_options},\n>\n>")
-  set(_cxx_flags "$<$<BOOL:${CMAKE_CXX_FLAGS}>:${CMAKE_CXX_FLAGS}\n>$<$<BOOL:${_build_cxx_flags}>:${_build_cxx_flags}\n>")
-  file(GENERATE OUTPUT "${_filename}" CONTENT "${_compile_definitions}${_include_directories}${_compile_flags}${_compile_options}${_cxx_flags}\n")
-endfunction()
-
-function(add_precompiled_header _target _input)
-
-  message(STATUS "Adding precompiled header ${_input} to target ${_target} with legacy method. "
-                 "Update your cmake instance to use the native PCH functions.")
-
-  cmake_parse_arguments(_PCH "FORCEINCLUDE" "SOURCE_CXX;SOURCE_C" "" ${ARGN})
-
-  get_filename_component(_input_we ${_input} NAME_WE)
-  get_filename_component(_input_full ${_input} ABSOLUTE)
-  file(TO_NATIVE_PATH "${_input_full}" _input_fullpath)
-
-  if(NOT _PCH_SOURCE_CXX)
-    set(_PCH_SOURCE_CXX "${_input_we}.cpp")
-  endif()
-  if(NOT _PCH_SOURCE_C)
-    set(_PCH_SOURCE_C "${_input_we}.c")
-  endif()
-
-  if(MSVC)
-    set(_pch_cxx_pch "${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/cxx_${_input_we}.pch")
-    set(_pch_c_pch "${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/c_${_input_we}.pch")
-
-    get_target_property(sources ${_target} SOURCES)
-    foreach(_source ${sources})
-      set(_pch_compile_flags "")
-      if(_source MATCHES \\.\(cc|cxx|cpp|c\)$)
-        if(_source MATCHES \\.\(cpp|cxx|cc\)$)
-          set(_pch_header "${_input}")
-          set(_pch "${_pch_cxx_pch}")
-        else()
-          set(_pch_header "${_input}")
-          set(_pch "${_pch_c_pch}")
-        endif()
-
-        if(_source STREQUAL "${_PCH_SOURCE_CXX}")
-          set(_pch_compile_flags "${_pch_compile_flags} \"/Fp${_pch_cxx_pch}\" \"/Yc${_input}\"")
-          set(_pch_source_cxx_found TRUE)
-          set_source_files_properties("${_source}" PROPERTIES OBJECT_OUTPUTS "${_pch_cxx_pch}")
-        elseif(_source STREQUAL "${_PCH_SOURCE_C}")
-          set(_pch_compile_flags "${_pch_compile_flags} \"/Fp${_pch_c_pch}\" \"/Yc${_input}\"")
-          set(_pch_source_c_found TRUE)
-          set_source_files_properties("${_source}" PROPERTIES OBJECT_OUTPUTS "${_pch_c_pch}")
-        else()
-          if(_source MATCHES \\.\(cpp|cxx|cc\)$)
-            set(_pch_compile_flags "${_pch_compile_flags} \"/Fp${_pch_cxx_pch}\" \"/Yu${_input_fullpath}\"")
-            set(_pch_source_cxx_needed TRUE)
-            set_source_files_properties("${_source}" PROPERTIES OBJECT_DEPENDS "${_pch_cxx_pch}")
-          else()
-            set(_pch_compile_flags "${_pch_compile_flags} \"/Fp${_pch_c_pch}\" \"/Yu${_input_fullpath}\"")
-            set(_pch_source_c_needed TRUE)
-            set_source_files_properties("${_source}" PROPERTIES OBJECT_DEPENDS "${_pch_c_pch}")
-          endif()
-          if(_PCH_FORCEINCLUDE)
-            set(_pch_compile_flags "${_pch_compile_flags} /FI${_input_fullpath}")
-          endif(_PCH_FORCEINCLUDE)
-        endif()
-
-        get_source_file_property(_object_depends "${_source}" OBJECT_DEPENDS)
-        if(NOT _object_depends)
-          set(_object_depends)
-        endif()
-        if(_PCH_FORCEINCLUDE)
-          list(APPEND _object_depends "${CMAKE_CURRENT_SOURCE_DIR}/${_pch_header}")
-        endif()
-
-        set_source_files_properties(${_source} PROPERTIES
-          COMPILE_FLAGS "${_pch_compile_flags}"
-          OBJECT_DEPENDS "${_object_depends}")
-      endif()
-    endforeach()
-
-    if(_pch_source_cxx_needed AND NOT _pch_source_cxx_found)
-      message(FATAL_ERROR "A source file ${_PCH_SOURCE_CXX} for ${_input} is required for MSVC builds. Can be set with the SOURCE_CXX option.")
-    endif()
-    if(_pch_source_c_needed AND NOT _pch_source_c_found)
-      message(FATAL_ERROR "A source file ${_PCH_SOURCE_C} for ${_input} is required for MSVC builds. Can be set with the SOURCE_C option.")
-    endif()
-  endif(MSVC)
-
-  if(CMAKE_COMPILER_IS_GNUCXX)
-    get_filename_component(_name ${_input} NAME)
-    set(_pch_header "${CMAKE_CURRENT_SOURCE_DIR}/${_input}")
-    set(_pch_binary_dir "${CMAKE_CURRENT_BINARY_DIR}/${_target}_pch")
-    set(_pchfile "${_pch_binary_dir}/${_input}")
-    set(_outdir "${CMAKE_CURRENT_BINARY_DIR}/${_target}_pch/${_name}.gch")
-    file(MAKE_DIRECTORY "${_outdir}")
-    set(_output_cxx "${_outdir}/.c++")
-    set(_output_c "${_outdir}/.c")
-
-    set(_pch_flags_file "${_pch_binary_dir}/compile_flags.rsp")
-    export_all_flags("${_pch_flags_file}")
-    set(_compiler_FLAGS "@${_pch_flags_file}")
-    add_custom_command(
-      OUTPUT "${_pchfile}"
-      COMMAND "${CMAKE_COMMAND}" -E copy "${_pch_header}" "${_pchfile}"
-      DEPENDS "${_pch_header}"
-      COMMENT "Updating ${_name}")
-    add_custom_command(
-      OUTPUT "${_output_cxx}"
-      COMMAND "${CMAKE_CXX_COMPILER}" ${_compiler_FLAGS} -x c++-header -o "${_output_cxx}" "${_pchfile}"
-      DEPENDS "${_pchfile}" "${_pch_flags_file}"
-      COMMENT "Precompiling ${_name} for ${_target} (C++)")
-    add_custom_command(
-      OUTPUT "${_output_c}"
-      COMMAND "${CMAKE_C_COMPILER}" ${_compiler_FLAGS} -x c-header -o "${_output_c}" "${_pchfile}"
-      DEPENDS "${_pchfile}" "${_pch_flags_file}"
-      COMMENT "Precompiling ${_name} for ${_target} (C)")
-
-    get_property(_sources TARGET ${_target} PROPERTY SOURCES)
-    foreach(_source ${_sources})
-      set(_pch_compile_flags "")
-
-      if(_source MATCHES \\.\(cc|cxx|cpp|c\)$)
-        get_source_file_property(_pch_compile_flags "${_source}" COMPILE_FLAGS)
-        if(NOT _pch_compile_flags)
-          set(_pch_compile_flags)
-        endif()
-        separate_arguments(_pch_compile_flags)
-        list(APPEND _pch_compile_flags -Winvalid-pch)
-        if(_PCH_FORCEINCLUDE)
-          list(APPEND _pch_compile_flags -include "${_pchfile}")
-        else(_PCH_FORCEINCLUDE)
-          list(APPEND _pch_compile_flags "-I${_pch_binary_dir}")
-        endif(_PCH_FORCEINCLUDE)
-
-        get_source_file_property(_object_depends "${_source}" OBJECT_DEPENDS)
-        if(NOT _object_depends)
-          set(_object_depends)
-        endif()
-        list(APPEND _object_depends "${_pchfile}")
-        if(_source MATCHES \\.\(cc|cxx|cpp\)$)
-          list(APPEND _object_depends "${_output_cxx}")
-        else()
-          list(APPEND _object_depends "${_output_c}")
-        endif()
-
-        combine_arguments(_pch_compile_flags)
-        set_source_files_properties(${_source} PROPERTIES
-          COMPILE_FLAGS "${_pch_compile_flags}"
-          OBJECT_DEPENDS "${_object_depends}")
-      endif()
-    endforeach()
-  endif(CMAKE_COMPILER_IS_GNUCXX)
-endfunction()
-
-else ()
-
-function(add_precompiled_header _target _input)
-    message(STATUS "Adding precompiled header ${_input} to target ${_target}.")
-    target_precompile_headers(${_target} PRIVATE ${_input})
-
-    get_target_property(_sources ${_target} SOURCES)
-    list(FILTER _sources INCLUDE REGEX ".*\\.mm?")
-
-    if (_sources)
-        message(STATUS "PCH skipping sources: ${_sources}")
-    endif ()
-
-    set_source_files_properties(${_sources} PROPERTIES SKIP_PRECOMPILE_HEADERS ON)
-endfunction()
-
-endif (CMAKE_VERSION VERSION_LESS 3.16)

cmake/modules/SelectLibraryConfigurations_SLIC3R.cmake

@@ -1,77 +0,0 @@
-# Modified from the CMake github master.
-# required by the bundled FindCURL.cmake
-
-
-
-
-# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
-# file Copyright.txt or https://cmake.org/licensing for details.
-
-#.rst:
-# SelectLibraryConfigurations
-# ---------------------------
-#
-#
-#
-# select_library_configurations( basename )
-#
-# This macro takes a library base name as an argument, and will choose
-# good values for basename_LIBRARY, basename_LIBRARIES,
-# basename_LIBRARY_DEBUG, and basename_LIBRARY_RELEASE depending on what
-# has been found and set.  If only basename_LIBRARY_RELEASE is defined,
-# basename_LIBRARY will be set to the release value, and
-# basename_LIBRARY_DEBUG will be set to basename_LIBRARY_DEBUG-NOTFOUND.
-# If only basename_LIBRARY_DEBUG is defined, then basename_LIBRARY will
-# take the debug value, and basename_LIBRARY_RELEASE will be set to
-# basename_LIBRARY_RELEASE-NOTFOUND.
-#
-# If the generator supports configuration types, then basename_LIBRARY
-# and basename_LIBRARIES will be set with debug and optimized flags
-# specifying the library to be used for the given configuration.  If no
-# build type has been set or the generator in use does not support
-# configuration types, then basename_LIBRARY and basename_LIBRARIES will
-# take only the release value, or the debug value if the release one is
-# not set.
-
-# This macro was adapted from the FindQt4 CMake module and is maintained by Will
-# Dicharry <wdicharry@stellarscience.com>.
-
-macro( select_library_configurations_SLIC3R basename )
-    if(NOT ${basename}_LIBRARY_RELEASE)
-        set(${basename}_LIBRARY_RELEASE "${basename}_LIBRARY_RELEASE-NOTFOUND" CACHE FILEPATH "Path to a library.")
-    endif()
-    if(NOT ${basename}_LIBRARY_DEBUG)
-        set(${basename}_LIBRARY_DEBUG "${basename}_LIBRARY_DEBUG-NOTFOUND" CACHE FILEPATH "Path to a library.")
-    endif()
-
-    get_property(_isMultiConfig GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
-    if( ${basename}_LIBRARY_DEBUG AND ${basename}_LIBRARY_RELEASE AND
-           NOT ${basename}_LIBRARY_DEBUG STREQUAL ${basename}_LIBRARY_RELEASE AND
-           ( _isMultiConfig OR CMAKE_BUILD_TYPE ) )
-        # if the generator is multi-config or if CMAKE_BUILD_TYPE is set for
-        # single-config generators, set optimized and debug libraries
-        set( ${basename}_LIBRARY "" )
-        foreach( _libname IN LISTS ${basename}_LIBRARY_RELEASE )
-            list( APPEND ${basename}_LIBRARY optimized "${_libname}" )
-        endforeach()
-        foreach( _libname IN LISTS ${basename}_LIBRARY_DEBUG )
-            list( APPEND ${basename}_LIBRARY debug "${_libname}" )
-        endforeach()
-    elseif( ${basename}_LIBRARY_RELEASE )
-        set( ${basename}_LIBRARY ${${basename}_LIBRARY_RELEASE} )
-    elseif( ${basename}_LIBRARY_DEBUG )
-        set( ${basename}_LIBRARY ${${basename}_LIBRARY_DEBUG} )
-    else()
-        set( ${basename}_LIBRARY "${basename}_LIBRARY-NOTFOUND")
-    endif()
-
-    set( ${basename}_LIBRARIES "${${basename}_LIBRARY}" )
-
-    if( ${basename}_LIBRARY )
-        set( ${basename}_FOUND TRUE )
-    endif()
-
-    mark_as_advanced( ${basename}_LIBRARY_RELEASE
-        ${basename}_LIBRARY_DEBUG
-    )
-endmacro()

cmake/modules/bin2h.cmake

@@ -1,89 +0,0 @@
-# Source: https://gist.github.com/sivachandran/3a0de157dccef822a230#file-bin2h-cmake
-# Added modifications to suit prusaslicer
-include(CMakeParseArguments)
-
-# Function to wrap a given string into multiple lines at the given column position.
-# Parameters:
-#   VARIABLE    - The name of the CMake variable holding the string.
-#   AT_COLUMN   - The column position at which string will be wrapped.
-function(WRAP_STRING)
-    set(oneValueArgs VARIABLE AT_COLUMN)
-    cmake_parse_arguments(WRAP_STRING "${options}" "${oneValueArgs}" "" ${ARGN})
-
-    string(LENGTH ${${WRAP_STRING_VARIABLE}} stringLength)
-    math(EXPR offset "0")
-
-    while(stringLength GREATER 0)
-
-        if(stringLength GREATER ${WRAP_STRING_AT_COLUMN})
-            math(EXPR length "${WRAP_STRING_AT_COLUMN}")
-        else()
-            math(EXPR length "${stringLength}")
-        endif()
-
-        string(SUBSTRING ${${WRAP_STRING_VARIABLE}} ${offset} ${length} line)
-        set(lines "${lines}\n${line}")
-
-        math(EXPR stringLength "${stringLength} - ${length}")
-        math(EXPR offset "${offset} + ${length}")
-    endwhile()
-
-    set(${WRAP_STRING_VARIABLE} "${lines}" PARENT_SCOPE)
-endfunction()
-
-# Function to embed contents of a file as byte array in C/C++ header file(.h). The header file
-# will contain a byte array and integer variable holding the size of the array.
-# Parameters
-#   SOURCE_FILE     - The path of source file whose contents will be embedded in the header file.
-#   VARIABLE_NAME   - The name of the variable for the byte array. The string "_SIZE" will be append
-#                     to this name and will be used a variable name for size variable.
-#   HEADER_FILE     - The path of header file.
-#   APPEND          - If specified appends to the header file instead of overwriting it
-#   NULL_TERMINATE  - If specified a null byte(zero) will be append to the byte array. This will be
-#                     useful if the source file is a text file and we want to use the file contents
-#                     as string. But the size variable holds size of the byte array without this
-#                     null byte.
-# Usage:
-#   bin2h(SOURCE_FILE "Logo.png" HEADER_FILE "Logo.h" VARIABLE_NAME "LOGO_PNG")
-function(BIN2H)
-    set(options APPEND NULL_TERMINATE ADD_WARNING_TEXT)
-    set(oneValueArgs SOURCE_FILE VARIABLE_NAME HEADER_FILE)
-    cmake_parse_arguments(BIN2H "${options}" "${oneValueArgs}" "" ${ARGN})
-
-    # reads source file contents as hex string
-    file(READ ${BIN2H_SOURCE_FILE} hexString HEX)
-    string(LENGTH ${hexString} hexStringLength)
-
-    # appends null byte if asked
-    if(BIN2H_NULL_TERMINATE)
-        set(hexString "${hexString}00")
-    endif()
-
-    # wraps the hex string into multiple lines at column 32(i.e. 16 bytes per line)
-    wrap_string(VARIABLE hexString AT_COLUMN 32)
-    math(EXPR arraySize "${hexStringLength} / 2")
-
-    # adds '0x' prefix and comma suffix before and after every byte respectively
-    string(REGEX REPLACE "([0-9a-f][0-9a-f])" "0x\\1, " arrayValues ${hexString})
-    # removes trailing comma
-    string(REGEX REPLACE ", $" "" arrayValues ${arrayValues})
-
-    # converts the variable name into proper C identifier
-    string(MAKE_C_IDENTIFIER "${BIN2H_VARIABLE_NAME}" BIN2H_VARIABLE_NAME)
-    # string(TOUPPER "${BIN2H_VARIABLE_NAME}" BIN2H_VARIABLE_NAME)
-
-    # declares byte array and the length variables
-    set(arrayDefinition "const unsigned char ${BIN2H_VARIABLE_NAME}[] = { ${arrayValues} };")
-    set(arraySizeDefinition "const size_t ${BIN2H_VARIABLE_NAME}_SIZE = ${arraySize};")
-    set(warnTxt "")
-    if (BIN2H_ADD_WARNING_TEXT)
-        set(warnTxt "/* WARN: This file is auto-generated from ${BIN2H_SOURCE_FILE} */\n")
-    endif ()
-
-    set(declarations "${warnTxt}${arrayDefinition}\n\n${arraySizeDefinition}\n\n")
-    if(BIN2H_APPEND)
-        file(APPEND ${BIN2H_HEADER_FILE} "${declarations}")
-    else()
-        file(WRITE ${BIN2H_HEADER_FILE} "${declarations}")
-    endif()
-endfunction()