cleanup odd behavior on refresh after exiting certain dialogs. remove unintended bypass for files needing to be verified before printing

fix: object skip when selected on print start

CHANGELOG.de.md

@@ -1,5 +1,78 @@
 # Changelog
 
+## [0.9.25] – 2026-06-17
+
+### Behoben
+- **Zufällige Abstürze / Container-Restarts — Segfault in `libcrypto.so.3`
+  (Issue #53).** Der MQTT-über-TLS-Client teilte einen einzelnen SSL-Socket
+  zwischen dem Reader-Thread (`recv`) und den Sender-Threads (`sendall`), ohne sie
+  zu serialisieren. CPythons `ssl`-Modul erlaubt kein gleichzeitiges Lesen und
+  Schreiben auf demselben Socket — die Überlappung korrumpierte den internen
+  OpenSSL-Zustand und löste eine Heap-Corruption + Segfault aus, die auf manchen
+  Hosts timing-bedingt zuverlässig auftrat. Sämtliche Socket-Zugriffe (recv /
+  sendall / close / reconnect) werden nun unter einem einzigen Lock serialisiert;
+  der Reader prüft die Bereitschaft mit `select()` außerhalb des Locks, damit die
+  Sender nie ausgehungert werden. Reconnect und Disconnect tauschen den Socket
+  jetzt atomar. Dank an @BasK für den detaillierten Fault-Handler-Trace.
+- **File-Browser akzeptierte Nicht-GCode-Uploads (Issue #59).** Drag & Drop umging
+  den `accept`-Filter des Dateidialogs, sodass z.B. ein JPG hochgeladen werden
+  konnte. Uploads werden jetzt client- und serverseitig validiert; nur `.gcode`,
+  `.gcode.3mf`, `.3mf` und `.bgcode` werden akzeptiert. Dank an @gangoke.
+
+## [0.9.24] – 2026-06-16
+
+### Neu
+- **Objekte überspringen in jedem Druck-Flow (Issue #57).** Der „Objekte
+  überspringen"-Bereich im Slot-Mapper erschien bisher nur beim Druck aus dem
+  Browser-Tab. Er ist jetzt in allen Flows verfügbar (inkl. Upload / Print-Leiste),
+  standardmäßig eingeklappt hinter einem `✂ Objekte überspringen (N)`-Header, damit
+  der Dialog kompakt bleibt — Klick klappt Vorschau + Checkliste auf.
+- **Slot-Mapper zeigt konkreten Profilnamen (Issue #57).** Jeder Slot zeigt nun das
+  zugeordnete Filament-Profil (z.B. „PolyTerra PLA — Polymaker") in den Dropdown-
+  Optionen und als Hover-Tooltip am Slot-Marker, statt nur des generischen Typs.
+  Fällt auf den generischen Typ zurück, wenn kein Profil gemappt ist.
+
+## [0.9.23] – 2026-06-16
+
+### Neu
+- **Druckdialog nach Upload automatisch öffnen.** Eine neue Einstellung
+  `print_start_dialog` (Einstellungen → Drucker → „Druckstart-Verhalten") steuert,
+  was nach einem Upload bei leerlaufendem Drucker passiert: „Print-Dialog" öffnet
+  den Slot-Zuordnungs-Dialog automatisch, „Print-Leiste" behält das bisherige
+  Banner. Basiert auf PR #56 von @gangoke.
+- **Auto-Leveling-Schalter pro Druck.** Der Druckdialog hat jetzt eine eigene
+  Auto-Leveling-Checkbox, die den globalen Standard für einen einzelnen Druck
+  überschreibt.
+
+### Behoben
+- **Objekt-Skip wurde beim Druckstart still ignoriert (PR #56, @gangoke).** Der
+  Skip-Befehl wurde gesendet, *bevor* der Drucker im `printing`-Status war, und
+  daher verworfen. Der Skip wird nun in einer Retry-Schleife erneut angewendet,
+  sobald der Druck bestätigt läuft — mit einer Pending-Sperre, damit die UI den
+  Skip-Status nicht vorzeitig zurücksetzt.
+- **Upload während eines laufenden Drucks überschrieb die Vorschau des laufenden
+  Auftrags.** Ein neuer Upload während des Drucks ersetzt nicht mehr Thumbnail /
+  file_ready des Auftrags auf dem Druckbett.
+
+## [0.9.22] – 2026-06-16
+
+### Neu
+- **Neu strukturiertes Einstellungs-Panel.** Das Einstellungs-Modal wurde durch
+  ein dauerhaftes Master-Detail-Panel mit fünf Kategorien ersetzt: Verbindung,
+  Drucker, Darstellung, Filament und System. Das Poll-Intervall ist nun live
+  einstellbar.
+- **Vendor-Sichtbarkeitsfilter (Issue #41).** Eine neue Checkliste in den
+  Filament-Einstellungen beschränkt das Slot-Profil-Dropdown auf bestimmte
+  Hersteller. „Generic" und eigene importierte Profile sind immer sichtbar.
+- **Idle-Datei-Aktionen in der Fortschritts-Karte (Issue #55).** Nach einem
+  Upload bei leerlaufendem Drucker erscheinen drei Schnellaktionen direkt in der
+  Fortschritts-Karte: ▶ Drucken, ⚙ Slots zuordnen und ✕ Leeren.
+
+### Behoben
+- **Mobileraker-Kompatibilität (Issue #48).** Absturz in `ConfigExtruder.fromJson`
+  (leeres `configfile.config`), Hänger beim Refresh (Metadata-Endlosschleife) und
+  fehlende ETA/Restzeit behoben.
+
 ## [0.9.21] – 2026-06-14
 
 ### Behoben

CHANGELOG.md

@@ -1,5 +1,95 @@
 # Changelog
 
+## [0.9.25] – 2026-06-17
+
+### Fixed
+- **Random crashes / container restarts — segfault in `libcrypto.so.3` (issue #53).**
+  The MQTT-over-TLS client shared a single SSL socket between the reader thread
+  (`recv`) and the sender threads (`sendall`) without serializing them. CPython's
+  `ssl` module does not allow concurrent read and write on the same socket — the
+  overlap corrupted OpenSSL's internal state, causing a heap corruption and a
+  segfault that manifested reliably on some hosts (timing-dependent). All socket
+  access (recv / sendall / close / reconnect) is now serialized under a single
+  lock; the reader probes readiness with `select()` outside the lock so senders
+  are never starved. Reconnect and disconnect now swap the socket atomically.
+  Thanks to @BasK for the detailed fault-handler trace that pinpointed this.
+- **File browser accepted non-GCode uploads (issue #59).** Drag & drop bypassed
+  the file picker's `accept` filter, so e.g. a JPG could be uploaded. Uploads are
+  now validated both client- and server-side; only `.gcode`, `.gcode.3mf`, `.3mf`
+  and `.bgcode` are accepted. Thanks @gangoke.
+
+## [0.9.24] – 2026-06-16
+
+### New
+- **Skip Objects available in every print flow (issue #57).** The "Skip objects"
+  panel in the Slot Mapper used to appear only when printing from the Browser tab.
+  It now shows in all flows (upload / print bar included), collapsed by default
+  behind a `✂ Skip objects (N)` header to keep the dialog compact, expanding on
+  click with the object preview and checklist.
+- **Slot Mapper shows the specific profile name (issue #57).** Each slot now
+  displays its mapped filament profile (e.g. "PolyTerra PLA — Polymaker") in the
+  dropdown options and as a hover tooltip on the slot marker, instead of just the
+  generic type. Falls back to the generic type when no profile is mapped.
+
+## [0.9.23] – 2026-06-16
+
+### New
+- **Auto-open print dialog after upload.** A new `print_start_dialog` setting
+  (Settings → Printer → "Start Print Behavior") controls what happens after a
+  file is uploaded while the printer is idle: `Print Dialog` opens the
+  slot-assignment dialog automatically, `Print Bar` keeps the previous banner
+  behaviour. Based on PR #56 by @gangoke.
+- **Per-print auto-leveling toggle.** The print dialog now has its own
+  auto-leveling checkbox that overrides the global default for a single print.
+
+### Fixed
+- **Object skip was silently ignored at print start (PR #56, @gangoke).** The
+  skip command was sent *before* the printer entered the `printing` state, so it
+  was dropped. The skip is now re-applied in a retry loop once the print is
+  confirmed running, with a pending-lock so the UI doesn't reset the skip state
+  prematurely.
+- **Upload during an active print overwrote the running job's preview.**
+  Uploading a new file while printing no longer replaces the thumbnail /
+  file_ready of the job currently on the bed.
+
+## [0.9.22] – 2026-06-16
+
+### New
+- **Restructured Settings panel.** The settings modal has been replaced by a
+  persistent Master-Detail panel with five categories: Connection, Printer,
+  Appearance, Filament, and System. Poll interval is now adjustable live.
+- **Vendor visibility filter (issue #41).** A new checklist in the Filament
+  settings lets you restrict the slot profile dropdown to specific manufacturers.
+  "Generic" and your own imported profiles are always visible. The list updates
+  automatically after a profile import.
+- **Idle file actions in the progress card (issue #55).** After uploading a file
+  while the printer is idle, three quick-action buttons appear directly in the
+  progress card: ▶ Print, ⚙ Map Slots, and ✕ Clear — matching the file browser
+  workflow without navigating away.
+
+### Fixed
+- **Mobileraker: app crashed with `Null is not a subtype of Object` in
+  `ConfigExtruder.fromJson` (issue #48).** `configfile.config` was returned as
+  an empty object `{}`. Mobileraker parses both `configfile.settings` and
+  `configfile.config` through the same strict Dart parser — both are now
+  populated with the same extruder/bed/stepper stub.
+- **Mobileraker: app hung indefinitely on refresh (issue #48).** The WebSocket
+  `server.files.metadata` handler called a non-existent store method
+  (`get_file_by_filename`), always returning empty metadata. Mobileraker retried
+  this thousands of times per second. Both the HTTP and WS paths now share a
+  single `_build_file_metadata()` method.
+- **Mobileraker: ETA / remaining time not shown (issue #48).** A side effect of
+  the metadata loop fix — once `currentFile` resolves, Mobileraker can calculate
+  ETA from `estimated_time`.
+- **Mobileraker: `notify_status_update` triggered repeated `ConfigFile.parse`
+  (issue #48).** Static objects (`configfile`, `webhooks`, `heaters`, `history`)
+  were included in every live status push. They are now filtered out; only live
+  telemetry is broadcast.
+- `motion_report` (`live_position`, `live_velocity`) added to printer objects
+  for Mobileraker motion display.
+- Saving filament slot profiles no longer silently drops the `visible_vendors`
+  setting from `config.ini`.
+
 ## [0.9.21] – 2026-06-14
 
 ### Fixed

VERSION

@@ -1 +1 @@
-0.9.21
+0.9.25

config.ini.example

@@ -34,9 +34,6 @@ auto_leveling    = 1
 # Kamera-Stream bei Druckstart automatisch einschalten (1 = an, 0 = aus)
 camera_on_print  = 0
 
-# Statt grünem Ready-Banner den Filament/Color-Selector automatisch öffnen (1 = an, 0 = aus)
-print_start_dialog = 1
-
 # Warnung vor Druck von Web-Uploads (1 = an, 0 = aus)
 web_upload_warning = 1
 

config_loader.py

@@ -60,8 +60,8 @@ def _load_config_file(path: pathlib.Path):
         "DEFAULT_AMS_SLOT":     (CONFIG_SECTION_PRINT,   "default_ams_slot"),
         "AUTO_LEVELING":        (CONFIG_SECTION_PRINT,   "auto_leveling"),
         "CAMERA_ON_PRINT":      (CONFIG_SECTION_PRINT,   "camera_on_print"),
-        "PRINT_START_DIALOG":   (CONFIG_SECTION_PRINT,   "print_start_dialog"),
         "WEB_UPLOAD_WARNING":   (CONFIG_SECTION_PRINT,   "web_upload_warning"),
+        "PRINT_START_DIALOG":   (CONFIG_SECTION_PRINT,   "print_start_dialog"),
         "BRIDGE_PRINTER_NAME":  (CONFIG_SECTION_BRIDGE,  "printer_name"),
     }
     for env_key, (section, option) in mapping.items():
@@ -73,7 +73,8 @@ def _load_config_file(path: pathlib.Path):
             except (configparser.NoSectionError, configparser.NoOptionError):
                 pass
 
-    # Backward compatibility: legacy option and env var
+
+    # Backward compatibility: old key FILE_READY_DIALOG → PRINT_START_DIALOG
     if "PRINT_START_DIALOG" not in os.environ:
         try:
             legacy = cfg.get(CONFIG_SECTION_PRINT, "file_ready_dialog")
@@ -110,7 +111,6 @@ def migrate_env_to_config(env_path: pathlib.Path, config_path: pathlib.Path):
         "default_ams_slot": env_vals.get("DEFAULT_AMS_SLOT", "auto"),
         "auto_leveling":    env_vals.get("AUTO_LEVELING",    "1"),
         "camera_on_print":  env_vals.get("CAMERA_ON_PRINT",  "0"),
-        "print_start_dialog": env_vals.get("PRINT_START_DIALOG", env_vals.get("FILE_READY_DIALOG", "1")),
         "web_upload_warning": env_vals.get("WEB_UPLOAD_WARNING", "1"),
     }
     cfg[CONFIG_SECTION_BRIDGE] = {
@@ -240,10 +240,17 @@ def save_filament_profiles(profiles: dict[int, dict]) -> bool:
         return False
     cfg = configparser.ConfigParser()
     cfg.read(path, encoding="utf-8")
+    # visible_vendors (Issue #41) ist kein Slot-Mapping — beim Ersetzen der
+    # Sektion erhalten, sonst geht der Vendor-Filter beim Slot-Save verloren.
+    preserved_vendors = None
+    if cfg.has_option("filament_profiles", "visible_vendors"):
+        preserved_vendors = cfg.get("filament_profiles", "visible_vendors")
     if cfg.has_section("filament_profiles"):
         cfg.remove_section("filament_profiles")
-    if profiles:
+    if profiles or preserved_vendors:
         cfg["filament_profiles"] = {}
+        if preserved_vendors:
+            cfg["filament_profiles"]["visible_vendors"] = preserved_vendors
         for slot_idx in sorted(profiles.keys()):
             entry = profiles[slot_idx] or {}
             if entry.get("vendor"):
@@ -257,6 +264,43 @@ def save_filament_profiles(profiles: dict[int, dict]) -> bool:
     return True
 
 
+def list_visible_vendors() -> list[str]:
+    """Liest [filament_profiles] visible_vendors (komma-separiert) aus config.ini.
+
+    Vendor-Sichtbarkeitsfilter für das Slot-Profil-Dropdown (Issue #41 Option A).
+    Leere Liste = keine Einschränkung (rückwärtskompatibel: alle Vendoren).
+    """
+    path = _find_config_file()
+    if not path:
+        return []
+    cfg = configparser.ConfigParser()
+    cfg.read(path, encoding="utf-8")
+    if not cfg.has_option("filament_profiles", "visible_vendors"):
+        return []
+    raw = cfg.get("filament_profiles", "visible_vendors")
+    return [v.strip() for v in raw.split(",") if v.strip()]
+
+
+def save_visible_vendors(vendors: list[str]) -> bool:
+    """Schreibt visible_vendors in [filament_profiles], ohne die Slot-Mappings
+    (slot_N_*) zu verlieren. Leere Liste entfernt den Key wieder."""
+    path = _find_config_file()
+    if not path:
+        return False
+    cfg = configparser.ConfigParser()
+    cfg.read(path, encoding="utf-8")
+    if not cfg.has_section("filament_profiles"):
+        cfg.add_section("filament_profiles")
+    clean = [v.strip() for v in (vendors or []) if v and v.strip()]
+    if clean:
+        cfg["filament_profiles"]["visible_vendors"] = ", ".join(clean)
+    elif cfg.has_option("filament_profiles", "visible_vendors"):
+        cfg.remove_option("filament_profiles", "visible_vendors")
+    with open(path, "w", encoding="utf-8") as f:
+        cfg.write(f)
+    return True
+
+
 def get(key: str, default: str = "") -> str:
     return os.environ.get(key, default)
 
@@ -271,5 +315,5 @@ DEVICE_ID        = get("DEVICE_ID",        "")
 DEFAULT_AMS_SLOT = get("DEFAULT_AMS_SLOT", "auto")
 AUTO_LEVELING    = int(get("AUTO_LEVELING","1"))
 CAMERA_ON_PRINT  = int(get("CAMERA_ON_PRINT","0"))
-PRINT_START_DIALOG = int(get("PRINT_START_DIALOG", get("FILE_READY_DIALOG","1")))
 WEB_UPLOAD_WARNING = int(get("WEB_UPLOAD_WARNING", "1"))
+PRINT_START_DIALOG = int(get("PRINT_START_DIALOG", get("FILE_READY_DIALOG", "1")))

kobrax_client.py

@@ -27,6 +27,7 @@ import hashlib
 import json
 import logging
 import os
+import select
 import socket
 import ssl
 import sys
@@ -120,6 +121,10 @@ class KobraXClient:
         self._buf     = b""
         self._pid     = 1
         self._lock    = threading.Lock()
+        # Generations-Marker: wird bei jedem Socket-Swap/Close erhöht, damit der
+        # Reader-Thread erkennt wenn _reconnect/_do_connect den Socket unter ihm
+        # ersetzt hat (Issue #53). Schützt gegen recv auf einem stale fd.
+        self._sock_gen = 0
         self._running = False
 
         # Pending requests by msgid (for response ACK)
@@ -167,21 +172,31 @@ class KobraXClient:
         ctx.set_ciphers("DEFAULT:@SECLEVEL=0")
         ctx.load_cert_chain(CERT_FILE, KEY_FILE)
 
-        _ai        = socket.getaddrinfo(self.host, self.port, socket.AF_INET, socket.SOCK_STREAM)
-        raw        = socket.create_connection(_ai[0][4], timeout=5)
-        self._sock = ctx.wrap_socket(raw)
-        log.info("TLS connected  cipher=%s", self._sock.cipher()[0])
+        # Socket als lokale Variable aufbauen — der Handshake (Connect + CONNACK)
+        # läuft OHNE gehaltenes Lock, damit ein langsamer Connect die Sender nicht
+        # einfriert. Erst der fertige Socket wird unter Lock eingeschwenkt (#53).
+        _ai      = socket.getaddrinfo(self.host, self.port, socket.AF_INET, socket.SOCK_STREAM)
+        raw      = socket.create_connection(_ai[0][4], timeout=5)
+        new_sock = ctx.wrap_socket(raw)
+        log.info("TLS connected  cipher=%s", new_sock.cipher()[0])
 
-        self._sock.sendall(_build_connect(self.client_id, self.username, self.password))
-        self._sock.settimeout(3)
-        r = self._sock.recv(64)
+        new_sock.sendall(_build_connect(self.client_id, self.username, self.password))
+        new_sock.settimeout(3)
+        r = new_sock.recv(64)
         if len(r) < 4 or r[0] != 0x20 or r[3] != 0:
+            try:
+                new_sock.close()
+            except Exception:
+                pass
             raise RuntimeError(f"CONNACK failed: {r.hex()}")
         log.info("CONNACK rc=0")
 
-        self._sock.settimeout(0.2)
-        self._buf = b""
-        self._subscribe(self._sub_topic())
+        new_sock.settimeout(0.2)
+        with self._lock:
+            self._sock = new_sock
+            self._sock_gen += 1
+            self._buf = b""
+        self._subscribe(self._sub_topic())  # nimmt das Lock selbst — nicht verschachteln
         log.debug("MQTT connected to %s:%s", self.host, self.port)
 
     def connect(self):
@@ -207,10 +222,14 @@ class KobraXClient:
 
     def disconnect(self):
         self._running = False
-        try:
-            self._sock.close()
-        except Exception:
-            pass
+        with self._lock:
+            try:
+                if self._sock is not None:
+                    self._sock.close()
+            except Exception:
+                pass
+            self._sock = None
+            self._sock_gen += 1
 
     def _reconnect(self):
         """Persistenter Reconnect: versucht endlos weiter bis der Drucker wieder
@@ -219,10 +238,16 @@ class KobraXClient:
         nur DEBUG um Log-Spam bei langem Drucker-Ausfall (z.B. über Nacht
         ausgeschaltet) zu vermeiden."""
         log.warning("Verbindung verloren – reconnect…")
-        try:
-            self._sock.close()
-        except Exception:
-            pass
+        # Close + Invalidierung unter Lock, damit kein Sender mitten im sendall
+        # auf den gerade geschlossenen Socket trifft (Issue #53).
+        with self._lock:
+            try:
+                if self._sock is not None:
+                    self._sock.close()
+            except Exception:
+                pass
+            self._sock = None
+            self._sock_gen += 1
         delays = [2, 4, 8, 15, 30, 60]
         attempt = 0
         while self._running:
@@ -246,7 +271,8 @@ class KobraXClient:
         with self._lock:
             pid = self._pid
             self._pid += 1
-            self._sock.sendall(_build_subscribe(topic, pid))
+            if self._sock is not None:
+                self._sock.sendall(_build_subscribe(topic, pid))
         log.info("SUB %s", topic)
 
     # -- Read loop -----------------------------------------------------------
@@ -256,17 +282,52 @@ class KobraXClient:
         _empty_count = 0
         while self._running:
             if time.time() - last_ping > 30:
+                ping_ok = False
                 with self._lock:
                     try:
-                        self._sock.sendall(_build_pingreq())
+                        if self._sock is not None:
+                            self._sock.sendall(_build_pingreq())
+                            ping_ok = True
                     except Exception:
-                        if self._running and not self._reconnect():
-                            break
-                        last_ping = time.time()
-                        continue
+                        ping_ok = False
+                # _reconnect() AUSSERHALB des Locks aufrufen — es nimmt das Lock
+                # selbst, und threading.Lock ist nicht reentrant (sonst Deadlock).
+                if not ping_ok:
+                    if self._running and not self._reconnect():
+                        break
                 last_ping = time.time()
+            # Aktuellen Socket + Generation unter Lock greifen, damit ein
+            # paralleler _reconnect/_do_connect-Swap uns nicht auf einem stale
+            # fd pollen lässt (Issue #53).
+            with self._lock:
+                sock = self._sock
+                gen  = self._sock_gen
+            if sock is None:
+                time.sleep(0.05)
+                continue
+
+            # Idle-Wartezeit OHNE Lock — select probt nur die Bereitschaft, so
+            # blockiert der Reader während Leerlauf nie das gemeinsame Lock.
             try:
-                data = self._sock.recv(65536)
+                ready, _, _ = select.select([sock], [], [], 0.2)
+            except (OSError, ValueError):
+                # fd geschlossen/ungültig (Reconnect oder Disconnect mitten im select)
+                if not self._running:
+                    break
+                time.sleep(0.05)
+                continue
+            if not ready:
+                continue  # Leerlauf, kein Lock gehalten
+
+            # Daten liegen an: Lock kurz greifen für das eine recv, serialisiert
+            # gegen alle sendall-Caller. recv blockiert nicht lange (select sagte
+            # ready, Socket-Timeout ist 0.2s).
+            try:
+                with self._lock:
+                    # Socket könnte zwischen select und hier ersetzt worden sein.
+                    if self._sock_gen != gen or self._sock is not sock:
+                        continue
+                    data = sock.recv(65536)
                 if not data:
                     # Windows SSL kann kurzzeitig b"" liefern ohne echten EOF
                     _empty_count += 1
@@ -275,7 +336,7 @@ class KobraXClient:
                     continue
                 _empty_count = 0
                 self._buf += data
-                self._drain()
+                self._drain()  # außerhalb des Locks — Dispatch/event.set() bleibt prompt
             except ssl.SSLWantReadError:
                 continue
             except socket.timeout:

kobrax_moonraker_bridge.py

@@ -34,6 +34,7 @@ except ImportError:
     import env_loader
 import asyncio
 import hashlib
+import copy
 import json
 import logging
 import os
@@ -751,6 +752,13 @@ class KobraXBridge:
             self._filament_profiles: dict[int, dict] = _cl.list_filament_profiles()
         except Exception:
             self._filament_profiles = {}
+        # Vendor-Sichtbarkeitsfilter fürs Slot-Profil-Dropdown (Issue #41 Option A).
+        # Leere Liste = alle Vendoren sichtbar (rückwärtskompatibel).
+        try:
+            import config_loader as _cl
+            self._visible_vendors: list[str] = _cl.list_visible_vendors()
+        except Exception:
+            self._visible_vendors = []
         self._last_state: dict = {}
         self._state = {
           "nozzle_temp":        0.0,
@@ -783,7 +791,7 @@ class KobraXBridge:
           "print_speed_mode":   2,
           "connection_error":   "",
           "file_ready":         "",
-                    "print_start_dialog":  getattr(args, "print_start_dialog", 0),
+          "print_start_dialog": getattr(args, "print_start_dialog", 1),
           "filament_mode":      "toolhead",
           "ace_drying": {"status": 0, "target_temp": 0, "duration": 0, "remain_time": 0, "humidity": None, "current_temp": None},
         }
@@ -807,7 +815,7 @@ class KobraXBridge:
 
         # Part-Skip: zuletzt vom Drucker gemeldete Skip-Liste (v0.9.10)
         self._skip_state: dict = {"objects": [], "skipped": [], "ts": 0}
-        # Pre-Print-Skip: pending until confirmed/applied via skip/start
+        # Pre-Print-Skip: pending until printer enters printing state
         self._pending_preprint_skip: list[str] = []
         self._pending_preprint_skip_deadline: float = 0.0
 
@@ -1063,31 +1071,49 @@ class KobraXBridge:
         """
         d = payload.get("data") or {}
         skipped = d.get("objects_skip_parts") or d.get("skipped") or d.get("skipped_parts") or []
-        # Während ein Pre-Print-Skip noch als pending markiert ist, ignorieren wir
-        # leere Früh-Reports kurzzeitig, damit die UI nicht sofort zurückspringt.
+        # Während ein Pre-Print-Skip noch pending ist, leere Früh-Reports ignorieren
+        # damit die UI nicht sofort zurückspringt bevor der Drucker den Skip bestätigt.
         now = time.time()
         if (not skipped and self._pending_preprint_skip
                 and now <= self._pending_preprint_skip_deadline):
             return
 
-        # Liste übernehmen (auch leer), sobald kein Pending-Lock aktiv ist.
+        # Während eines aktiven Drucks sind Skip-Zustände effektiv monoton.
+        # Manche Firmware-Reports kommen zwischenzeitlich leer/teilweise zurück;
+        # diese dürfen bereits bestätigte Skip-Objekte nicht aus der UI löschen.
+        existing_skipped = [str(n) for n in (self._skip_state.get("skipped") or []) if n]
+        existing_set = set(existing_skipped)
+        incoming_skipped = [str(n) for n in (skipped or []) if n]
+        incoming_set = set(incoming_skipped)
+        active_print = self._state.get("print_state") in ("printing", "paused")
+        if active_print and existing_set:
+            if not incoming_set:
+                skipped = list(existing_skipped)
+            elif not incoming_set.issuperset(existing_set):
+                merged = list(existing_skipped)
+                for n in incoming_skipped:
+                    if n not in existing_set:
+                        merged.append(n)
+                skipped = merged
+
+        # Pending-Lock aufheben sobald Drucker die gewünschten Objekte bestätigt
+        if self._pending_preprint_skip and set(skipped) >= set(self._pending_preprint_skip):
+            self._pending_preprint_skip = []
+            self._pending_preprint_skip_deadline = 0.0
         self._skip_state = {
             "skipped":  list(skipped),
             "ts":       int(time.time()),
         }
-        if self._pending_preprint_skip and set(skipped) >= set(self._pending_preprint_skip):
-            self._pending_preprint_skip = []
-            self._pending_preprint_skip_deadline = 0.0
         if payload.get("state") == "done" or payload.get("code") == 200:
             log.info(f"Skip-Antwort: state={payload.get('state')} code={payload.get('code')} skipped={skipped}")
 
     def _on_file(self, payload: dict):
         d = payload.get("data") or {}
         details = d.get("file_details") or {}
+        thumb = details.get("thumbnail") or details.get("png_image") or ""
         file_name = d.get("filename") or details.get("filename") or self._last_uploaded_file
         active_print = self._state.get("print_state") in ("printing", "paused")
         current_print_file = self._state.get("filename") or ""
-        thumb = details.get("thumbnail") or details.get("png_image") or ""
         # Uploads während eines laufenden Drucks dürfen die aktive
         # Fortschritts-Vorschau nicht überschreiben.
         if thumb and (not active_print or (file_name and file_name == current_print_file)):
@@ -1106,6 +1132,36 @@ class KobraXBridge:
                     log.warning(f"update_file_objects fehlgeschlagen: {e}")
         self._push_status_update()
 
+    def _apply_preprint_skip_after_start(self, names: list[str], retries: int = 20, delay_s: float = 0.75):
+        """Sendet Skip-Befehl erst nachdem Drucker in printing-State gewechselt hat.
+
+        Vorher sendet der Drucker den Befehl ins Leere (kein aktiver Druck).
+        """
+        wanted = [str(n) for n in (names or []) if isinstance(n, str) and n]
+        if not wanted:
+            return False
+        for i in range(max(1, int(retries))):
+            try:
+                # kobra_state ist waehrend Start oft nicht exakt "printing"
+                # (z.B. busy/preheating). Auf print_state pruefen, sonst wird
+                # skip/start nie abgeschickt.
+                if self._state.get("print_state") not in ("printing", "paused"):
+                    time.sleep(max(0.1, float(delay_s)))
+                    continue
+                resp = self.client.skip_objects(wanted)
+                if resp is not None:
+                    log.info(f"Pre-Print skip applied ({len(wanted)} objects) on attempt {i+1}/{retries}")
+                    self._pending_preprint_skip = []
+                    self._pending_preprint_skip_deadline = 0.0
+                    return True
+            except Exception as e:
+                log.debug(f"Pre-Print skip attempt {i+1}/{retries} failed: {e}")
+            time.sleep(max(0.1, float(delay_s)))
+        log.warning(f"Pre-Print skip could not be confirmed after {retries} attempts")
+        self._pending_preprint_skip = []
+        self._pending_preprint_skip_deadline = 0.0
+        return False
+
     @staticmethod
     def _detect_filament_mode(boxes: list, head_tools_model: int = -1) -> str:
         """Detect active filament topology mode.
@@ -1713,13 +1769,22 @@ class KobraXBridge:
     # WebSocket push
     # -------------------------------------------------------------------------
 
+    # Statische Objekte, die sich zur Laufzeit nie ändern. Sie werden einmalig
+    # per objects.query/subscribe ausgeliefert, aber NICHT in jedem
+    # notify_status_update mitgeschickt — sonst läuft Mobilerakers
+    # ConfigFile.parse (teuer + strikt) bei jedem Status-Tick erneut und die App
+    # hängt/crasht beim Refresh (Issue #48).
+    _STATIC_STATUS_OBJECTS = ("configfile", "webhooks", "heaters", "history")
+
     def _push_status_update(self):
         if not self.ws_clients:
             return
+        objs = self._build_printer_objects()
+        live = {k: v for k, v in objs.items() if k not in self._STATIC_STATUS_OBJECTS}
         msg = {
             "jsonrpc": "2.0",
             "method":  "notify_status_update",
-            "params": [self._build_printer_objects(), time.time()],
+            "params": [live, time.time()],
         }
         text = json.dumps(msg)
         dead = set()
@@ -1877,6 +1942,17 @@ class KobraXBridge:
                 "homing_origin":  [0, 0, 0, 0],
                 "position":       [0, 0, self._estimate_current_z(), 0],
             },
+            # motion_report: Mobileraker liest die Live-Geschwindigkeit hier
+            # (live_velocity). Der Kobra-X-MQTT liefert KEINE echte mm/s, nur
+            # einen print_speed_mode (1-4). live_velocity bleibt daher 0 — das
+            # Objekt muss aber existieren, sonst zeigt Mobileraker nichts an
+            # (motion_report war zuvor null). live_position spiegelt die
+            # geschätzte Z-Höhe (wie gcode_move).
+            "motion_report": {
+                "live_position":          [0, 0, self._estimate_current_z(), 0],
+                "live_velocity":          0.0,
+                "live_extruder_velocity": 0.0,
+            },
             "fan": {
                 "speed": (int(s.get("fan_speed") or 0)) / 100.0,
                 "rpm":   None,
@@ -1913,40 +1989,78 @@ class KobraXBridge:
             # configfile stub — Mobileraker und andere Clients crashen ohne
             # dieses Objekt (Missing field: configFile). Werte aus der
             # entschlüsselten avata_main.conf (ACCFG1.0 — Kobra X Firmware).
-            "configfile": {
-                "config": {},
-                "settings": {
-                    "printer": {
-                        "kinematics":              "cartesian",
-                        "max_velocity":            450,
-                        "max_accel":               10000,
-                        "max_z_velocity":          12,
-                        "max_z_accel":             100,
-                        "square_corner_velocity":  20.0,
-                    },
-                    "extruder": {
-                        "nozzle_diameter":    0.4,
-                        "filament_diameter":  1.75,
-                        "sensor_type":        "ATC Semitec 104GT-2",
-                        "min_temp":           0,
-                        "max_temp":           320,
-                        "min_extrude_temp":   10,
-                    },
-                    "heater_bed": {
-                        "min_temp": 0,
-                        "max_temp": 120,
-                    },
-                    "stepper_x": {"position_min": -18.5, "position_max": 280},
-                    "stepper_y": {"position_min": -6.5,  "position_max": 272.5},
-                    "stepper_z": {"position_min": -4,    "position_max": 262},
-                    "virtual_sdcard": {"path": "/data/gcodes"},
-                    "pause_resume":   {},
-                    "display_status": {},
-                },
-                "warnings": [],
-                "save_config_pending": False,
-                "save_config_pending_items": {},
+            # Mobileraker (Issue #48) parst BEIDE Zweige config + settings durch
+            # denselben ConfigFile.parse → ConfigExtruder.fromJson; ein leeres
+            # config:{} ließ den nicht-nullbaren Dart-Parser crashen. Daher wird
+            # config identisch zu settings gespiegelt.
+            "configfile": self._klipper_configfile_stub(),
+        }
+
+    def _klipper_configfile_stub(self) -> dict:
+        """Minimaler Klipper-configfile-Stub für Mobileraker/OctoApp (Issue #48).
+
+        Mobileraker parst BEIDE Zweige `config` und `settings` durch denselben
+        ConfigFile.parse → ConfigExtruder.fromJson. Ein leeres `config: {}`
+        ließ den nicht-nullbaren Dart-Parser crashen, daher wird `config`
+        identisch zu `settings` gespiegelt. Werte aus der entschlüsselten
+        avata_main.conf (ACCFG1.0 — Kobra X Firmware).
+        """
+        settings = {
+            "printer": {
+                "kinematics":              "cartesian",
+                "max_velocity":            450,
+                "max_accel":               10000,
+                "max_z_velocity":          12,
+                "max_z_accel":             100,
+                "square_corner_velocity":  20.0,
             },
+            "extruder": {
+                "nozzle_diameter":    0.4,
+                "filament_diameter":  1.75,
+                "sensor_type":        "ATC Semitec 104GT-2",
+                "min_temp":           0,
+                "max_temp":           320,
+                "min_extrude_temp":   10,
+                # Mobileraker ConfigExtruder erwartet diese Felder non-nullable
+                # (max_extrude_only_distance, max_power) bzw. als Key präsent
+                # (max_extrude_only_velocity/accel dürfen null sein). Fehlen =
+                # Crash in ConfigExtruder.fromJson (Issue #48).
+                "max_extrude_only_distance": 100.0,
+                "max_power":                 1.0,
+                "max_extrude_only_velocity": None,
+                "max_extrude_only_accel":    None,
+            },
+            "heater_bed": {
+                # Mobileraker ConfigHeaterBed: heater_pin, sensor_type, control
+                # sind non-nullable. Werte sind Platzhalter (Bridge kennt die
+                # echten Pins nicht — Anycubic-Firmware, kein Klipper-printer.cfg).
+                "heater_pin":  "PA0",
+                "sensor_type": "ATC Semitec 104GT-2",
+                "control":     "pid",
+                "min_temp":    0,
+                "max_temp":    120,
+            },
+            # stepper_* mit non-nullable Pflichtfeldern (step_pin, dir_pin,
+            # rotation_distance) füllen, sonst crasht ConfigStepper.fromJson.
+            "stepper_x": {"step_pin": "PA1", "dir_pin": "PA2", "rotation_distance": 40,
+                          "position_min": -18.5, "position_max": 280},
+            "stepper_y": {"step_pin": "PA3", "dir_pin": "PA4", "rotation_distance": 40,
+                          "position_min": -6.5,  "position_max": 272.5},
+            "stepper_z": {"step_pin": "PA5", "dir_pin": "PA6", "rotation_distance": 8,
+                          "position_min": -4,    "position_max": 262},
+            "virtual_sdcard": {"path": "/data/gcodes"},
+            "pause_resume":   {},
+            "display_status": {},
+        }
+        # config + settings müssen dieselben Felder enthalten — Mobileraker
+        # parst beide. deepcopy, damit kein Client durch geteilte Referenz
+        # versehentlich beide Zweige mutiert.
+        return {
+            "config":   copy.deepcopy(settings),
+            "settings": settings,
+            "warnings": [],
+            "save_config_pending": False,
+            "save_config_pending_items": {},
         }
 
     # -------------------------------------------------------------------------
@@ -2266,6 +2380,31 @@ class KobraXBridge:
                                 "name":   entry.get("name", ""),
                                 "id":     entry.get("id", "")})
 
+    async def handle_kx_visible_vendors(self, request):
+        """GET/POST /kx/filament/visible_vendors — Vendor-Sichtbarkeitsfilter
+        fürs Slot-Profil-Dropdown (Issue #41 Option A).
+
+        GET  → {"result": ["Polymaker", "eSUN", ...]}
+        POST {"vendors": [...]} → speichert in config.ini [filament_profiles]
+             visible_vendors. Leere Liste = alle sichtbar. KEIN Bridge-Neustart
+             nötig (nur Anzeigefilter)."""
+        if request.method == "POST":
+            try:
+                data = await request.json()
+            except Exception:
+                data = {}
+            vendors = data.get("vendors") or []
+            if not isinstance(vendors, list):
+                return self._json_cors({"error": "vendors must be a list"}, status=400)
+            self._visible_vendors = [str(v).strip() for v in vendors if str(v).strip()]
+            try:
+                import config_loader as _cl
+                _cl.save_visible_vendors(self._visible_vendors)
+            except Exception as e:
+                log.warning(f"save_visible_vendors failed: {e}")
+                return self._json_cors({"error": str(e)}, status=500)
+        return self._json_cors({"result": self._visible_vendors})
+
     def _load_orca_filaments(self) -> list[dict]:
         """Lädt System- + User-Profile aus dem Cache. System-Profile kommen
         aus bridge/data/orca_filaments.json (Image-embedded), User-Profile
@@ -2365,26 +2504,29 @@ class KobraXBridge:
     async def handle_kx_skip_query(self, request):
         """Druck-Objektliste vom Drucker neu abfragen.
 
-        POST /kx/skip/query  → triggert skip/query_obj, gibt zuletzt bekannten
-        Stand zurück (skip/report kommt async, Frontend pollt /kx/skip/state).
+        POST /kx/skip/query  → triggert skip/query_obj, wartet kurz auf den
+        async skip/report und gibt den zusammengeführten Skip-State zurück.
         """
+        prev_ts = int(self._skip_state.get("ts", 0) or 0)
         try:
             loop = asyncio.get_event_loop()
             await loop.run_in_executor(None, lambda: self.client.query_skip_objects())
         except Exception as e:
             return self._json_cors({"error": str(e)}, status=502)
-        return self._json_cors({"result": self._skip_state})
 
-    async def handle_kx_skip_state(self, request):
-        """Aktueller Skip-State.
+        # skip/report kommt asynchron; kurz warten, damit der Rückgabewert
+        # möglichst den frisch bestätigten Druckerzustand enthält.
+        deadline = time.time() + 1.5
+        while time.time() < deadline:
+            cur_ts = int(self._skip_state.get("ts", 0) or 0)
+            if cur_ts > prev_ts:
+                break
+            await asyncio.sleep(0.1)
 
-        Kombiniert:
-        - Gesamt-Objektliste: aus dem GCode-Store, gematcht über den aktuell
-          laufenden filename (file/report beim Druckstart hat die Liste gefüllt).
-          skip/query_obj liefert nämlich NUR die bereits geskippten zurück,
-          nicht die Gesamtliste.
-        - Geskippt: aus self._skip_state (von skip/report aktualisiert).
-        """
+        return self._json_cors({"result": self._build_skip_state_result()})
+
+    def _build_skip_state_result(self) -> dict:
+        """Baut den kombinierten Skip-State für UI-Endpunkte."""
         filename = self._state.get("filename", "")
         all_objects: list[str] = []
         svg = ""
@@ -2396,13 +2538,25 @@ class KobraXBridge:
                     svg = f.get("svg_image") or ""
             except Exception as e:
                 log.warning(f"skip_state lookup failed: {e}")
-        result = {
+        return {
             "objects":  all_objects,
             "skipped":  list(self._skip_state.get("skipped", [])),
             "svg_b64":  svg,
             "ts":       self._skip_state.get("ts", 0),
             "filename": filename,
         }
+
+    async def handle_kx_skip_state(self, request):
+        """Aktueller Skip-State.
+
+        Kombiniert:
+        - Gesamt-Objektliste: aus dem GCode-Store, gematcht über den aktuell
+          laufenden filename (file/report beim Druckstart hat die Liste gefüllt).
+          skip/query_obj liefert nämlich NUR die bereits geskippten zurück,
+          nicht die Gesamtliste.
+        - Geskippt: aus self._skip_state (von skip/report aktualisiert).
+        """
+        result = self._build_skip_state_result()
         return self._json_cors({"result": result})
 
     async def handle_kx_printers(self, request):
@@ -2452,15 +2606,6 @@ class KobraXBridge:
         excluded_objects = body.get("excluded_objects") or []
         if not isinstance(excluded_objects, list):
             excluded_objects = []
-        # Pre-Print-Auswahl sofort im UI-Status spiegeln (wird später durch
-        # skip/report vom Drucker überschrieben/aktualisiert).
-        self._skip_state = {"skipped": list(excluded_objects), "ts": int(time.time())}
-        if excluded_objects:
-            self._pending_preprint_skip = [str(n) for n in excluded_objects if isinstance(n, str) and n]
-            self._pending_preprint_skip_deadline = time.time() + 12.0
-        else:
-            self._pending_preprint_skip = []
-            self._pending_preprint_skip_deadline = 0.0
 
         if assignments:
           ams_box_mapping, unused_count, invalid_count = self._build_assigned_ams_box_mapping(assignments)
@@ -2503,13 +2648,19 @@ class KobraXBridge:
                 "ai_settings":   {"status": 0, "count": 0, "type": 1},
                 "timelapse":     {"status": 0, "count": 0, "type": 64},
                 "drying_settings": {"status": 0, "target_temp": 0, "duration": 0, "remain_time": 0},
-                # Firmware-Variante A (funktioniert bei mehreren Builds)
-                "objects_skip_parts": excluded_objects,
-                # Firmware-Variante B (beibehalten für Kompatibilität)
                 "model_objects_skip_parts": excluded_objects,
             },
         }
 
+        # UI erst nach echter Drucker-Bestaetigung als "geskippt" markieren.
+        self._skip_state = {"skipped": [], "ts": int(time.time())}
+        if excluded_objects:
+            self._pending_preprint_skip = [str(n) for n in excluded_objects if isinstance(n, str) and n]
+            self._pending_preprint_skip_deadline = time.time() + 12.0
+        else:
+            self._pending_preprint_skip = []
+            self._pending_preprint_skip_deadline = 0.0
+
         log.info(f"KX-Store Druckstart: {filename}  ams={len(ams_box_mapping)} slots  assignments={bool(assignments)}  excluded={len(excluded_objects)}")
         loop = asyncio.get_event_loop()
         result = await loop.run_in_executor(
@@ -2625,18 +2776,16 @@ class KobraXBridge:
             })
         return web.json_response({"result": files})
 
-    async def handle_files_metadata(self, request):
-        """Moonraker /server/files/metadata — moonraker-obico-Plugin holt das
-        einmal pro Druck und liest daraus `object_height` (für `currentZ`-
-        Anzeige im Obico-UI: `mmProgress` braucht maxZ), `layer_count`,
-        `layer_height` und `first_layer_height` (für die Layer-Berechnung).
+    def _build_file_metadata(self, filename: str) -> dict:
+        """Baut die Moonraker-file-metadata für eine Datei. Gemeinsame Quelle
+        für HTTP /server/files/metadata UND den WS-RPC server.files.metadata
+        (vorher hatte der WS-Pfad eigene, kaputte Logik mit einer nicht
+        existierenden Store-Methode → leere Antwort → Mobileraker fragte in
+        Endlosschleife, App hing beim Refresh, Issue #48).
 
-        Quelle: aktueller `_state` + GCode-Store-Eintrag wenn vorhanden.
-        Wenn Layer-Heights weder im State noch im Store sind, Fallback auf die
-        OrcaSlicer-Default-Filename-Heuristik (`_layer_height_from_filename`)."""
-        filename = request.rel_url.query.get("filename", "") or self._state.get("filename", "")
-        if not filename:
-            return web.json_response({"result": {}})
+        Liefert Mobileraker-kompatible Pflichtfelder: `filename`, `size`,
+        `modified` sind in GCodeFile non-nullable; `print_start_time` und die
+        Slicer-Felder optional."""
         s = self._state
         layer_h = float(s.get("layer_height") or 0.0)
         first_h = float(s.get("first_layer_height") or 0.0)
@@ -2660,16 +2809,27 @@ class KobraXBridge:
             if layer_h and not first_h:
                 first_h = layer_h
         object_height = round(first_h + max(0, total_layers - 1) * layer_h, 3) if (layer_h and total_layers) else 0.0
-        return web.json_response({"result": {
+        return {
             "filename":           filename,
-            "size":               size_bytes,
+            # GCodeFile (Mobileraker) verlangt size als non-nullable int.
+            "size":               size_bytes or 1,
             "modified":           time.time(),
             "estimated_time":     est_time or None,
             "layer_height":       layer_h or None,
             "first_layer_height": first_h or None,
             "layer_count":        total_layers or None,
             "object_height":      object_height or None,
-        }})
+            "thumbnails":         [],
+        }
+
+    async def handle_files_metadata(self, request):
+        """Moonraker /server/files/metadata — moonraker-obico + Mobileraker
+        holen Datei-Metadaten (Slicer-Zeit, Layer, object_height).
+        Logik in _build_file_metadata (gemeinsam mit WS-RPC)."""
+        filename = request.rel_url.query.get("filename", "") or self._state.get("filename", "")
+        if not filename:
+            return web.json_response({"result": {}})
+        return web.json_response({"result": self._build_file_metadata(filename)})
 
     # ── Moonraker-Stubs für moonraker-obico ──────────────────────────────────
     async def handle_access_api_key(self, request):
@@ -2775,7 +2935,6 @@ class KobraXBridge:
         ct = request.headers.get("Content-Type", "")
         if "multipart" not in ct:
             return web.json_response({"error": "expected multipart"}, status=400)
-        active_print = self._state.get("print_state") in ("printing", "paused")
         auto_print = False
         web_upload = False
         reader = await request.multipart()
@@ -2803,20 +2962,29 @@ class KobraXBridge:
         if not file_data:
             return web.json_response({"error": "no file received"}, status=400)
 
+        # Nur druckbare Dateien zulassen (Issue #59) — verhindert dass z.B. ein
+        # JPG im File-Browser landet. OrcaSlicer-Uploads sind .gcode/.gcode.3mf,
+        # der Kobra X akzeptiert .gcode/.3mf/.bgcode.
+        _allowed_ext = (".gcode", ".gcode.3mf", ".3mf", ".bgcode")
+        _fn_lower = (remote_filename or "").lower()
+        if not _fn_lower.endswith(_allowed_ext):
+            log.warning(f"Upload abgelehnt (kein GCode): {remote_filename}")
+            return web.json_response(
+                {"error": f"only GCode files allowed ({', '.join(_allowed_ext)})"},
+                status=400,
+            )
+
         file_md5   = hashlib.md5(file_data).hexdigest()
         file_size  = len(file_data)
 
         # Slicer-Zeitschätzung + Thumbnail aus GCode auslesen
         est_time = _parse_gcode_estimated_time(file_data)
+        self._state["slicer_time"] = est_time
         thumbnail_b64 = _extract_thumbnail(file_data)
         gcode_filaments = _extract_filament_info(file_data)
         layer_h, first_h = _parse_gcode_layer_heights(file_data)
-        # Aktiven Druck nicht mit Metadaten eines neu hochgeladenen Files
-        # überschreiben (Fortschrittsansicht muss beim laufenden Job bleiben).
-        if not active_print:
-            self._state["slicer_time"] = est_time
-            self._state["layer_height"] = layer_h
-            self._state["first_layer_height"] = first_h
+        self._state["layer_height"] = layer_h
+        self._state["first_layer_height"] = first_h
 
         # Datei persistent im GCode-Store ablegen
         self._store.save_file(
@@ -2857,12 +3025,9 @@ class KobraXBridge:
         if not auto_print:
             auto_print = request.rel_url.query.get("print", "false").lower() == "true"
 
-        # Thumbnail nur dann im Runtime-State aktualisieren, wenn kein aktiver
-        # Druck läuft. Sonst könnte das Upload-Thumbnail die laufende
-        # Fortschrittsvorschau verdrängen.
-        if not active_print:
-            self._thumbnail_b64 = ""
-            self.client.publish("file", "fileDetails", {"root": "local", "filename": remote_filename}, timeout=0)
+        # Thumbnail immer anfordern (Drucker antwortet async mit file/report)
+        self._thumbnail_b64 = ""
+        self.client.publish("file", "fileDetails", {"root": "local", "filename": remote_filename}, timeout=0)
 
         self._state["last_upload_url"]  = serve_url
         self._state["last_upload_md5"]  = file_md5
@@ -2900,10 +3065,6 @@ class KobraXBridge:
     def _start_print(self, filename: str, url: str = "", md5: str = "", filesize: int = 0,
                      gcode_filaments: list | None = None):
         self._state["file_ready"] = ""
-        # Neuer Druck ohne Pre-Print-Excludes: Skip-State zurücksetzen.
-        self._skip_state = {"skipped": [], "ts": int(time.time())}
-        self._pending_preprint_skip = []
-        self._pending_preprint_skip_deadline = 0.0
         loaded = self._select_loaded_slots_for_print(warn_on_empty_default=True)
 
         # Nur die im GCode TATSÄCHLICH genutzten Paints auf Slots mappen. OrcaSlicer
@@ -2927,7 +3088,7 @@ class KobraXBridge:
         use_ams = len(loaded) > 0
         ams_box_mapping = self._build_auto_ams_box_mapping(loaded_slots=loaded)
         log.debug(f"AMS-Slots: {len(loaded)} gemappt (genutzte Paints: {used_paint_indices}) → {[i for i, _ in loaded]}")
-        auto_leveling = int(body.get("auto_leveling", getattr(self._args, "auto_leveling", 1)))
+        auto_leveling = getattr(self._args, "auto_leveling", 1)
         payload = {
             "taskid":       "-1",
             "url":          url,
@@ -2959,37 +3120,6 @@ class KobraXBridge:
         else:
             log.warning("Druckstart: keine Antwort vom Drucker")
 
-    def _apply_preprint_skip_after_start(self, names: list[str], retries: int = 20, delay_s: float = 0.75):
-        wanted = [str(n) for n in (names or []) if isinstance(n, str) and n]
-        if not wanted:
-            return False
-
-        self._pending_preprint_skip = list(wanted)
-        self._pending_preprint_skip_deadline = time.time() + max(3.0, float(retries) * float(delay_s) + 2.0)
-
-        # UI should already reflect intended skips immediately.
-        self._skip_state = {"skipped": list(wanted), "ts": int(time.time())}
-
-        for i in range(max(1, int(retries))):
-            try:
-                if self._state.get("kobra_state") != "printing":
-                    time.sleep(max(0.1, float(delay_s)))
-                    continue
-                resp = self.client.skip_objects(wanted)
-                if resp is not None:
-                    log.info(f"Pre-Print skip applied ({len(wanted)} objects) on attempt {i+1}/{retries}")
-                    self._pending_preprint_skip = []
-                    self._pending_preprint_skip_deadline = 0.0
-                    return True
-            except Exception as e:
-                log.debug(f"Pre-Print skip attempt {i+1}/{retries} failed: {e}")
-            time.sleep(max(0.1, float(delay_s)))
-
-        log.warning(f"Pre-Print skip could not be confirmed after {retries} attempts")
-        self._pending_preprint_skip = []
-        self._pending_preprint_skip_deadline = 0.0
-        return False
-
     def _theme_index_path(self) -> str:
         return os.path.join(_WEB_BASE, "web", "themes", self._ui_theme, "index.html")
 
@@ -3033,15 +3163,6 @@ class KobraXBridge:
         excluded_objects = body.get("excluded_objects") or []
         if not isinstance(excluded_objects, list):
             excluded_objects = []
-        # Pre-Print-Auswahl sofort im UI-Status spiegeln (wird später durch
-        # skip/report vom Drucker überschrieben/aktualisiert).
-        self._skip_state = {"skipped": list(excluded_objects), "ts": int(time.time())}
-        if excluded_objects:
-            self._pending_preprint_skip = [str(n) for n in excluded_objects if isinstance(n, str) and n]
-            self._pending_preprint_skip_deadline = time.time() + 12.0
-        else:
-            self._pending_preprint_skip = []
-            self._pending_preprint_skip_deadline = 0.0
         if filament_assignments is not None:
           ams_box_mapping, unused_count, invalid_count = self._build_assigned_ams_box_mapping(filament_assignments)
           if unused_count:
@@ -3081,13 +3202,19 @@ class KobraXBridge:
                 "ai_settings":   {"status": 0, "count": 0, "type": 0},
                 "timelapse":     {"status": 0, "count": 0, "type": 0},
                 "drying_settings": {"status": 0, "target_temp": 0, "duration": 0, "remain_time": 0},
-                # Firmware-Variante A (funktioniert bei mehreren Builds)
-                "objects_skip_parts": excluded_objects,
-                # Firmware-Variante B (beibehalten für Kompatibilität)
                 "model_objects_skip_parts": excluded_objects,
             },
         }
 
+        # UI erst nach echter Drucker-Bestaetigung als "geskippt" markieren.
+        self._skip_state = {"skipped": [], "ts": int(time.time())}
+        if excluded_objects:
+            self._pending_preprint_skip = [str(n) for n in excluded_objects if isinstance(n, str) and n]
+            self._pending_preprint_skip_deadline = time.time() + 12.0
+        else:
+            self._pending_preprint_skip = []
+            self._pending_preprint_skip_deadline = 0.0
+
         log.info(
           f"print/start api=1 mode={self._filament_mode} "
           f"ams={len(ams_box_mapping)} slots assignments={filament_assignments is not None}"
@@ -3125,15 +3252,6 @@ class KobraXBridge:
 
     async def handle_api_file_ready_clear(self, request):
         self._state["file_ready"] = ""
-        self._state["filename"] = ""
-        self._state["progress"] = 0.0
-        self._state["print_duration"] = 0
-        self._state["remain_time"] = 0
-        self._state["curr_layer"] = 0
-        self._state["total_layers"] = 0
-        self._state["slicer_time"] = 0
-        self._state["layer_height"] = 0.0
-        self._state["first_layer_height"] = 0.0
         self._thumbnail_b64 = ""
         self._push_status_update()
         return web.json_response({"result": "ok"})
@@ -3760,7 +3878,7 @@ class KobraXBridge:
             "thumbnail":        thumbnail,
             "connection_error": s["connection_error"],
             "file_ready":       s["file_ready"],
-            "print_start_dialog": getattr(self._args, "print_start_dialog", 1),
+            "print_start_dialog": s.get("print_start_dialog", getattr(self._args, "print_start_dialog", 1)),
             "version":          self._read_version(),
         })
 
@@ -3898,8 +4016,11 @@ class KobraXBridge:
             "default_ams_slot": getattr(self._args, "default_ams_slot", "auto"),
             "auto_leveling":    getattr(self._args, "auto_leveling", 1),
             "camera_on_print":  getattr(self._args, "camera_on_print", 0),
-            "print_start_dialog": getattr(self._args, "print_start_dialog", 1),
             "web_upload_warning": getattr(self._args, "web_upload_warning", 1),
+            "print_start_dialog": getattr(self._args, "print_start_dialog", 1),
+            "poll_interval":    getattr(self._args, "poll_interval", 3),
+            "filament_profiles": {str(k): v for k, v in self._filament_profiles.items()},
+            "visible_vendors":  self._visible_vendors,
             "ace_dry_presets":  self._ace_dry_presets,
         })
 
@@ -3929,10 +4050,15 @@ class KobraXBridge:
         cfg.set("print",      "default_ams_slot", str(data.get("default_ams_slot", getattr(self._args, "default_ams_slot", "auto"))))
         cfg.set("print",      "auto_leveling",    str(data.get("auto_leveling",    getattr(self._args, "auto_leveling",    1))))
         cfg.set("print",      "camera_on_print",  str(int(bool(data.get("camera_on_print", getattr(self._args, "camera_on_print", 0))))))
-        print_start_dialog = int(bool(data.get("print_start_dialog", data.get("file_ready_dialog", getattr(self._args, "print_start_dialog", 0)))))
-        cfg.set("print",      "print_start_dialog", str(print_start_dialog))
         cfg.set("print",      "web_upload_warning", str(int(bool(data.get("web_upload_warning", getattr(self._args, "web_upload_warning", 1))))))
-        if not cfg.has_option("bridge", "poll_interval"):
+        cfg.set("print",      "print_start_dialog", str(int(bool(data.get("print_start_dialog", getattr(self._args, "print_start_dialog", 1))))))
+        if "poll_interval" in data:
+            try:
+                pi = max(1, min(60, int(data["poll_interval"])))
+            except (TypeError, ValueError):
+                pi = 3
+            cfg.set("bridge", "poll_interval", str(pi))
+        elif not cfg.has_option("bridge", "poll_interval"):
             cfg.set("bridge", "poll_interval", "3")
         printer_name = str(data.get("printer_name", "")).strip()
         if printer_name:
@@ -3940,9 +4066,6 @@ class KobraXBridge:
         elif cfg.has_option("bridge", "printer_name"):
             cfg.remove_option("bridge", "printer_name")
 
-        self._args.print_start_dialog = print_start_dialog
-        self._args.auto_leveling = int(data.get("auto_leveling", getattr(self._args, "auto_leveling", 1)))
-
         incoming_presets = data.get("ace_dry_presets") if isinstance(data, dict) else None
         presets = self._sanitize_ace_dry_presets(incoming_presets if isinstance(incoming_presets, dict) else self._ace_dry_presets)
         for key, val in presets.items():
@@ -4100,8 +4223,9 @@ class KobraXBridge:
         # Bei einem Restart muss environ bereinigt werden, sonst liest der neue Prozess
         # die alten Werte statt der geänderten config.ini.
         for _k in ("PRINTER_IP", "MQTT_PORT", "MQTT_USERNAME", "MQTT_PASSWORD",
-               "MODE_ID", "DEVICE_ID", "DEFAULT_AMS_SLOT", "AUTO_LEVELING",
-               "CAMERA_ON_PRINT", "PRINT_START_DIALOG", "FILE_READY_DIALOG", "WEB_UPLOAD_WARNING", "BRIDGE_PRINTER_NAME"):
+                   "MODE_ID", "DEVICE_ID", "DEFAULT_AMS_SLOT", "AUTO_LEVELING",
+                   "CAMERA_ON_PRINT", "WEB_UPLOAD_WARNING", "PRINT_START_DIALOG",
+                   "FILE_READY_DIALOG", "BRIDGE_PRINTER_NAME"):
             os.environ.pop(_k, None)
 
         in_docker = os.path.exists("/.dockerenv") or os.environ.get("KX_IN_DOCKER")
@@ -4599,23 +4723,13 @@ class KobraXBridge:
             elif method == "machine.update.status":
                 result = {"busy": False, "version_info": {}}
             elif method == "server.files.metadata":
-                # Obico fragt nach Metadaten zu einer Datei (filename in params)
+                # Obico + Mobileraker fragen Metadaten zu einer Datei. Dieselbe
+                # Logik wie der HTTP-Endpoint (vorher eigener kaputter Pfad mit
+                # nicht existierender Store-Methode → leere Antwort →
+                # Mobileraker-Endlosschleife, Issue #48).
                 fname = (params or {}).get("filename") if isinstance(params, dict) else None
-                meta = {}
-                if fname:
-                    try:
-                        rec = self._store.get_file_by_filename(fname) if hasattr(self._store, "get_file_by_filename") else None
-                    except Exception:
-                        rec = None
-                    if rec:
-                        meta = {
-                            "filename": rec.get("filename"),
-                            "size":     rec.get("size_bytes") or 0,
-                            "modified": time.time(),
-                            "estimated_time": rec.get("est_print_time_sec") or 0,
-                            "thumbnails": [],
-                        }
-                result = meta
+                fname = fname or self._state.get("filename", "")
+                result = self._build_file_metadata(fname) if fname else {}
             else:
                 log.debug(f"Unbekannte RPC-Methode: {method}")
                 result = {}
@@ -4819,6 +4933,8 @@ def build_app(bridge: KobraXBridge) -> web.Application:
     r.add_get("/kx/filament/slots",        bridge.handle_kx_filament_slots)
     r.add_get("/kx/filament/profiles",     bridge.handle_kx_filament_profiles)
     r.add_post("/kx/filament/slots/{idx}/profile", bridge.handle_kx_filament_slot_profile)
+    r.add_get("/kx/filament/visible_vendors",  bridge.handle_kx_visible_vendors)
+    r.add_post("/kx/filament/visible_vendors", bridge.handle_kx_visible_vendors)
     # Custom-Profile-Import (Issue #41) — User lädt eigene Orca-Filament-
     # Profile als ZIP/JSON hoch (z.B. aus ~/.config/OrcaSlicer/user/<id>/filament/),
     # weil die Bridge typischerweise nicht auf demselben Host wie OrcaSlicer läuft.
@@ -4993,9 +5109,9 @@ def main():
     parser.add_argument("--default-ams-slot",default=env_loader.DEFAULT_AMS_SLOT)
     parser.add_argument("--auto-leveling",   type=int, default=env_loader.AUTO_LEVELING)
     parser.add_argument("--camera-on-print", type=int, default=env_loader.CAMERA_ON_PRINT)
-    parser.add_argument("--print-start-dialog", type=int, default=env_loader.PRINT_START_DIALOG)
-    parser.add_argument("--file-ready-dialog", dest="print_start_dialog", type=int)
     parser.add_argument("--web-upload-warning", type=int, default=env_loader.WEB_UPLOAD_WARNING)
+    parser.add_argument("--print-start-dialog", dest="print_start_dialog", type=int, default=env_loader.PRINT_START_DIALOG)
+    parser.add_argument("--file-ready-dialog",  dest="print_start_dialog", type=int)
 
     parser.add_argument("--host",            default="0.0.0.0",
                         help="Bind-Adresse für den Bridge-Server")

web/themes/default/index.html

@@ -42,122 +42,12 @@
       <option value="zh-cn">中文(简体)</option>
     </select>
   </div>
-  <button class="theme-btn" onclick="openSettings()" id="settings-btn" title="">⚙</button>
+  <button class="theme-btn" onclick="showPanel('settings')" id="settings-btn" title="Einstellungen">⚙</button>
   <button class="conn-btn disconnected" id="conn-btn" onclick="toggleConnection()">⚡ Verbinden</button>
 </header>
 
 <!-- ═══ SETTINGS MODAL ═══ -->
-<div class="modal-overlay" id="settings-modal" onclick="if(event.target===this)closeSettings()">
-  <div class="modal-box">
-    <div class="modal-header">
-      <span class="modal-title" id="modal-title-settings">Einstellungen</span>
-      <button class="modal-close" onclick="closeSettings()">✕</button>
-    </div>
-
-    <div>
-      <div class="modal-field" style="margin-bottom:12px">
-        <label id="lbl-printer-name" style="font-weight:600">Drucker-Name</label>
-        <input type="text" id="s-printer-name" placeholder="z.B. Kobra X Links">
-      </div>
-      <div class="modal-section" id="modal-sec-connection">Verbindung</div>
-      <div class="modal-field">
-        <label id="lbl-printer-ip">Drucker-IP</label>
-        <input type="text" id="s-printer-ip" placeholder="192.168.x.x">
-        <small id="lbl-ip-hint" style="color:#f80;display:none"></small>
-      </div>
-      <div class="modal-field">
-        <label id="lbl-mqtt-port">MQTT-Port</label>
-        <input type="number" id="s-mqtt-port" placeholder="9883">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-username">MQTT-Benutzername</label>
-        <input type="text" id="s-username" placeholder="userXXXXXXXX" autocomplete="new-password">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-password">MQTT-Passwort</label>
-        <input type="password" id="s-password" autocomplete="new-password">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-device-id">Device-ID</label>
-        <input type="text" id="s-device-id" placeholder="32 Hex-Zeichen">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-mode-id">Mode-ID</label>
-        <input type="text" id="s-mode-id" placeholder="20030">
-      </div>
-    </div>
-
-    <div>
-      <div class="modal-section" id="modal-sec-print">Druckeinstellungen</div>
-      <div class="modal-field">
-        <label id="lbl-file-ready-mode"></label>
-        <select id="s-file-ready-mode">
-          <option value="dialog" id="opt-file-ready-dialog"></option>
-          <option value="banner" id="opt-file-ready-banner"></option>
-        </select>
-      </div>
-      <div class="modal-field">
-        <label id="lbl-default-slot">Standard-Slot (Einfarbdruck)</label>
-        <select id="s-default-slot">
-          <option value="auto" id="opt-slot-auto">Auto (alle belegten Slots)</option>
-          <option value="0" id="opt-slot-0">Slot 1</option>
-          <option value="1" id="opt-slot-1">Slot 2</option>
-          <option value="2" id="opt-slot-2">Slot 3</option>
-          <option value="3" id="opt-slot-3">Slot 4</option>
-        </select>
-      </div>
-      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
-        <input type="checkbox" id="s-auto-leveling" style="width:auto;margin:0">
-        <label id="lbl-auto-leveling" style="margin:0;cursor:pointer" for="s-auto-leveling">Auto-Leveling vor Druck</label>
-      </div>
-      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
-        <input type="checkbox" id="s-camera-on-print" style="width:auto;margin:0">
-        <label id="lbl-camera-on-print" style="margin:0;cursor:pointer" for="s-camera-on-print">Kamera bei Druckstart einschalten</label>
-      </div>
-      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
-        <input type="checkbox" id="s-web-upload-warning" style="width:auto;margin:0">
-        <label id="lbl-web-upload-warning" style="margin:0;cursor:pointer" for="s-web-upload-warning">Warnung bei Web-Upload-Druck anzeigen</label>
-      </div>
-    </div>
-
-    <div>
-      <div class="modal-section" id="modal-sec-poll">Poll-Intervall</div>
-      <div class="poll-btns">
-        <button class="poll-btn" onclick="setPoll(1000)" id="poll-1">1s</button>
-        <button class="poll-btn active" onclick="setPoll(2000)" id="poll-2">2s</button>
-        <button class="poll-btn" onclick="setPoll(5000)" id="poll-5">5s</button>
-      </div>
-    </div>
-
-    <!-- OrcaSlicer-Profile (Custom-Profile-Import, Issue #41) -->
-    <div>
-      <div class="modal-section" id="modal-sec-orca-profiles">OrcaSlicer-Profile</div>
-      <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="orca-profiles-hint">
-        Eigene Profile aus OrcaSlicer importieren (User-Dir öffnen via Help → Show Configuration Folder)
-      </div>
-      <div id="orca-profiles-list" style="margin-bottom:8px;font-size:12px;color:var(--txt2)"></div>
-      <button class="btn btn-sm" id="btn-orca-profiles-import" onclick="openProfileImport()"
-        style="background:var(--raised);color:var(--txt)">
-        ⬆ <span id="lbl-orca-profiles-import">Profile importieren</span>
-      </button>
-    </div>
-
-    <div>
-      <div class="modal-section" id="modal-sec-version">Version</div>
-      <div class="update-row">
-        <span id="s-version-label" style="font-size:13px;color:var(--txt)">–</span>
-        <button class="btn btn-sm" style="background:var(--raised);color:var(--txt)" onclick="checkUpdate()" id="btn-update-check">🔄 <span id="lbl-update-check">Auf Updates prüfen</span></button>
-      </div>
-      <div class="update-status" id="update-status" style="margin-top:6px"></div>
-      <button class="btn btn-sm btn-accent" id="btn-update-apply" style="display:none;margin-top:8px" onclick="applyUpdate()">
-        <span id="lbl-update-apply">Jetzt installieren</span>
-      </button>
-      <div id="update-changelog" style="display:none;margin-top:10px;background:var(--raised);border-radius:6px;padding:10px;font-size:11px;font-family:var(--mono);color:var(--txt2);white-space:pre-wrap;max-height:180px;overflow-y:auto;line-height:1.6"></div>
-    </div>
-
-    <button class="modal-save" onclick="saveSettings()" id="btn-save-settings">Speichern &amp; Neustart</button>
-  </div>
-</div>
+<!-- Settings-Modal entfernt — jetzt #panel-settings (Master-Detail im Main-Bereich) -->
 
 <!-- ═══ AMS SLOT EDIT DIALOG ═══ -->
 <div class="modal-overlay" id="slot-edit-modal" onclick="if(event.target===this)closeSlotEdit()">
@@ -237,6 +127,8 @@
       <span class="nav-icon">🗂</span><span class="nav-text">Browser</span></button>
     <button class="nav-btn" onclick="showPanel('console');clearLogBadge()" id="nb-console">
       <span class="nav-icon">≡</span><span class="nav-text">Konsole</span><span id="log-badge" style="display:none;margin-left:4px;background:var(--err);color:#fff;border-radius:10px;font-size:10px;padding:1px 5px;font-weight:700"></span></button>
+    <button class="nav-btn" onclick="showPanel('settings')" id="nb-settings">
+      <span class="nav-icon">⚙</span><span class="nav-text" id="nav-settings">Einstellungen</span></button>
   </nav>
 
   <main>
@@ -300,15 +192,17 @@
             </div>
           </div>
           <div class="fname" id="d-fname" title="" style="margin-top:6px">–</div>
-          <div class="ctrl-btns" id="d-ready-btns" style="margin-top:12px;display:none">
-            <button class="btn btn-accent btn-sm" id="d-btn-ready-print" onclick="startProgressReadyFile()">▶ Print</button>
-            <button class="btn btn-cancel btn-sm" id="d-btn-ready-clear" onclick="clearProgressReadyFile()">✕ Clear</button>
-          </div>
           <div class="ctrl-btns" id="d-ctrl-btns" style="margin-top:12px;display:none">
             <button class="btn btn-pause btn-sm" id="d-btn-pause" onclick="togglePauseResume()">⏸ Pause</button>
             <button class="btn btn-skip btn-sm" id="d-btn-skip" onclick="openSkipDialog()" style="display:none">✂ <span id="d-btn-skip-label">Objekte</span></button>
             <button class="btn btn-cancel btn-sm" id="d-btn-cancel" onclick="confirmCancel()">✕ Stopp</button>
           </div>
+          <!-- Aktionen für eine geladene, aber nicht laufende Datei (Issue #55) -->
+          <div class="ctrl-btns" id="d-idle-btns" style="margin-top:12px;display:none">
+            <button class="btn btn-accent btn-sm" id="d-idle-print" onclick="startIdleFile()">▶ <span id="d-idle-print-lbl">Drucken</span></button>
+            <button class="btn btn-sm" id="d-idle-slots" onclick="startIdleFileWithSlots()" style="background:var(--raised);color:var(--txt)">⚙ <span id="d-idle-slots-lbl">Slots zuordnen</span></button>
+            <button class="btn btn-cancel btn-sm" id="d-idle-clear" onclick="clearIdleFile()">✕ <span id="d-idle-clear-lbl">Leeren</span></button>
+          </div>
         </div>
 
         <!-- Temperatursteuerung + Verlauf -->
@@ -501,36 +395,199 @@
       <div class="card">
         <div class="card-title" style="display:flex;justify-content:space-between;align-items:center">
           <span><span>≡</span> <span id="ptitle-console">Ereignis-Log</span></span>
-           <a id="btn-log-dl" href="/api/log/download" download
-             style="font-size:12px;padding:4px 10px;background:var(--raised);border-radius:6px;color:var(--txt2);text-decoration:none"></a>
+          <a id="btn-log-dl" href="/api/log/download" download
+             style="font-size:12px;padding:4px 10px;background:var(--raised);border-radius:6px;color:var(--txt2);text-decoration:none">⬇ Download</a>
         </div>
         <div style="display:flex;gap:6px;margin-bottom:6px;flex-wrap:wrap;align-items:center">
-          <input id="log-filter" type="text" placeholder=""
+          <input id="log-filter" type="text" placeholder="Filter…"
             oninput="renderLog()"
             style="flex:1;min-width:120px;padding:5px 10px;background:var(--raised);border:1px solid var(--border);border-radius:6px;color:var(--txt);font-size:12px;font-family:var(--mono)">
           <button id="btn-autoscroll" onclick="toggleAutoScroll()"
-            style="font-size:12px;padding:5px 10px;border-radius:6px;border:1px solid var(--border);background:var(--accent);color:#fff;cursor:pointer;white-space:nowrap"></button>
-          <button id="btn-log-clear" onclick="consoleLogs=[];renderLog()"
-            style="font-size:12px;padding:5px 10px;border-radius:6px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer"></button>
+            style="font-size:12px;padding:5px 10px;border-radius:6px;border:1px solid var(--border);background:var(--accent);color:#fff;cursor:pointer;white-space:nowrap">⬇ Auto</button>
+          <button onclick="consoleLogs=[];renderLog()"
+            style="font-size:12px;padding:5px 10px;border-radius:6px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer">✕ Clear</button>
         </div>
         <div style="display:flex;gap:5px;margin-bottom:8px;flex-wrap:wrap">
-          <span id="log-lbl-dir" style="font-size:11px;color:var(--txt2);align-self:center;margin-right:2px"></span>
+          <span style="font-size:11px;color:var(--txt2);align-self:center;margin-right:2px">Dir:</span>
           <button class="log-dir-btn active" id="logdir-all"  onclick="setLogDir('all')"  style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
-          <button class="log-dir-btn"        id="logdir-rx"   onclick="setLogDir('rx')"   style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
-          <button class="log-dir-btn"        id="logdir-tx"   onclick="setLogDir('tx')"   style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
-          <span style="font-size:11px;color:var(--txt2);align-self:center;margin-left:6px;margin-right:2px" id="log-lbl-level"></span>
+          <button class="log-dir-btn"        id="logdir-rx"   onclick="setLogDir('rx')"   style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">RX</button>
+          <button class="log-dir-btn"        id="logdir-tx"   onclick="setLogDir('tx')"   style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">TX</button>
+          <span style="font-size:11px;color:var(--txt2);align-self:center;margin-left:6px;margin-right:2px" id="log-lbl-level">Level:</span>
           <button class="log-lvl-btn active" id="loglvl-all"  onclick="setLogLevel('all')"  style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
-          <button class="log-lvl-btn"        id="loglvl-err"  onclick="setLogLevel('err')"  style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
-          <button class="log-lvl-btn"        id="loglvl-warn" onclick="setLogLevel('warn')" style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
-          <span id="log-lbl-topic" style="font-size:11px;color:var(--txt2);align-self:center;margin-left:6px;margin-right:2px"></span>
-          <button id="log-topic-ams" class="log-topic-btn" data-topic="multiColorBox" onclick="setLogTopic('multiColorBox')" style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
-          <button id="log-topic-print" class="log-topic-btn" data-topic="print"         onclick="setLogTopic('print')"         style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
-          <button id="log-topic-info" class="log-topic-btn" data-topic="info"          onclick="setLogTopic('info')"          style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
-          <button id="log-topic-status" class="log-topic-btn" data-topic="status"        onclick="setLogTopic('status')"        style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
+          <button class="log-lvl-btn"        id="loglvl-err"  onclick="setLogLevel('err')"  style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">⛔ Errors</button>
+          <button class="log-lvl-btn"        id="loglvl-warn" onclick="setLogLevel('warn')" style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">⚠ Warn</button>
+          <span style="font-size:11px;color:var(--txt2);align-self:center;margin-left:6px;margin-right:2px">Topic:</span>
+          <button class="log-topic-btn" data-topic="multiColorBox" onclick="setLogTopic('multiColorBox')" style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">AMS</button>
+          <button class="log-topic-btn" data-topic="print"         onclick="setLogTopic('print')"         style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">print</button>
+          <button class="log-topic-btn" data-topic="info"          onclick="setLogTopic('info')"          style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">info</button>
+          <button class="log-topic-btn" data-topic="status"        onclick="setLogTopic('status')"        style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">status</button>
         </div>
         <div class="console" id="console-log" style="height:calc(100vh - 260px);min-height:160px" onscroll="onLogScroll()"></div>
       </div>
     </div>
+
+    <!-- ═══ EINSTELLUNGEN ═══ -->
+    <div class="panel" id="panel-settings">
+      <div class="settings-wrap">
+        <div class="settings-cats">
+          <button class="set-cat active" id="setcat-connection" onclick="showSettingsCat('connection')"><span>🔌</span> <span id="setcat-lbl-connection">Verbindung</span></button>
+          <button class="set-cat" id="setcat-printer" onclick="showSettingsCat('printer')"><span>🖨</span> <span id="setcat-lbl-printer">Drucker</span></button>
+          <button class="set-cat" id="setcat-display" onclick="showSettingsCat('display')"><span>🎨</span> <span id="setcat-lbl-display">Darstellung</span></button>
+          <button class="set-cat" id="setcat-filament" onclick="showSettingsCat('filament')"><span>🧵</span> <span id="setcat-lbl-filament">Filament</span></button>
+          <button class="set-cat" id="setcat-system" onclick="showSettingsCat('system')"><span>⚙</span> <span id="setcat-lbl-system">System</span></button>
+        </div>
+
+        <div class="settings-content">
+          <!-- Verbindung -->
+          <div class="set-group active" id="setgrp-connection">
+            <div class="card">
+              <div class="card-title"><span>🔌</span> <span id="modal-sec-connection">Verbindung</span></div>
+              <div class="modal-field" style="margin-bottom:12px">
+                <label id="lbl-printer-name" style="font-weight:600">Drucker-Name</label>
+                <input type="text" id="s-printer-name" placeholder="z.B. Kobra X Links">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-printer-ip">Drucker-IP</label>
+                <input type="text" id="s-printer-ip" placeholder="192.168.x.x">
+                <small id="lbl-ip-hint" style="color:#f80;display:none"></small>
+              </div>
+              <div class="modal-field">
+                <label id="lbl-mqtt-port">MQTT-Port</label>
+                <input type="number" id="s-mqtt-port" placeholder="9883">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-username">MQTT-Benutzername</label>
+                <input type="text" id="s-username" placeholder="userXXXXXXXX" autocomplete="new-password">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-password">MQTT-Passwort</label>
+                <input type="password" id="s-password" autocomplete="new-password">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-device-id">Device-ID</label>
+                <input type="text" id="s-device-id" placeholder="32 Hex-Zeichen">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-mode-id">Mode-ID</label>
+                <input type="text" id="s-mode-id" placeholder="20030">
+              </div>
+            </div>
+          </div>
+
+          <!-- Drucker -->
+          <div class="set-group" id="setgrp-printer">
+            <div class="card">
+              <div class="card-title"><span>🖨</span> <span id="modal-sec-print">Druckeinstellungen</span></div>
+              <div class="modal-field">
+                <label id="lbl-default-slot">Standard-Slot (Einfarbdruck)</label>
+                <select id="s-default-slot">
+                  <option value="auto" id="opt-slot-auto">Auto (alle belegten Slots)</option>
+                  <option value="0" id="opt-slot-0">Slot 1</option>
+                  <option value="1" id="opt-slot-1">Slot 2</option>
+                  <option value="2" id="opt-slot-2">Slot 3</option>
+                  <option value="3" id="opt-slot-3">Slot 4</option>
+                </select>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <input type="checkbox" id="s-auto-leveling" style="width:auto;margin:0">
+                <label id="lbl-auto-leveling" style="margin:0;cursor:pointer" for="s-auto-leveling">Auto-Leveling vor Druck</label>
+              </div>
+              <div class="modal-field">
+                <label id="lbl-file-ready-mode">Nach Upload: Druckstart-Verhalten</label>
+                <select id="s-file-ready-mode">
+                  <option value="1" id="opt-file-ready-dialog">Print-Dialog</option>
+                  <option value="0" id="opt-file-ready-banner">Print-Leiste</option>
+                </select>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <input type="checkbox" id="s-camera-on-print" style="width:auto;margin:0">
+                <label id="lbl-camera-on-print" style="margin:0;cursor:pointer" for="s-camera-on-print">Kamera bei Druckstart einschalten</label>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <input type="checkbox" id="s-web-upload-warning" style="width:auto;margin:0">
+                <label id="lbl-web-upload-warning" style="margin:0;cursor:pointer" for="s-web-upload-warning">Warnung bei Web-Upload-Druck anzeigen</label>
+              </div>
+            </div>
+          </div>
+
+          <!-- Darstellung -->
+          <div class="set-group" id="setgrp-display">
+            <div class="card">
+              <div class="card-title"><span>🎨</span> <span id="setcat-lbl-display2">Darstellung</span></div>
+              <div class="modal-field">
+                <label id="lbl-set-lang">Sprache</label>
+                <select id="s-lang-select" onchange="setLanguage(this.value)">
+                  <option value="de">Deutsch</option>
+                  <option value="en">English</option>
+                  <option value="es">Espanol</option>
+                  <option value="fr">Français</option>
+                  <option value="zh-cn">中文(简体)</option>
+                </select>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <button class="btn btn-sm" style="background:var(--raised);color:var(--txt)" onclick="toggleTheme()"><span id="lbl-set-theme">Hell / Dunkel umschalten</span></button>
+              </div>
+              <div class="modal-field">
+                <label id="lbl-poll-interval">Poll-Intervall (Sekunden)</label>
+                <input type="number" id="s-poll-interval" min="1" max="60" step="1" placeholder="3" oninput="onPollIntervalInput()">
+                <small style="color:var(--txt2)" id="lbl-poll-hint">Wie oft die Bridge den Drucker-Status abfragt</small>
+              </div>
+            </div>
+          </div>
+
+          <!-- Filament -->
+          <div class="set-group" id="setgrp-filament">
+            <div class="card">
+              <div class="card-title"><span>🧵</span> <span id="modal-sec-orca-profiles">OrcaSlicer-Profile</span></div>
+              <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="orca-profiles-hint">
+                Eigene Profile aus OrcaSlicer importieren (User-Dir öffnen via Help → Show Configuration Folder)
+              </div>
+              <div id="orca-profiles-list" style="margin-bottom:8px;font-size:12px;color:var(--txt2)"></div>
+              <button class="btn btn-sm" id="btn-orca-profiles-import" onclick="openProfileImport()"
+                style="background:var(--raised);color:var(--txt)">
+                ⬆ <span id="lbl-orca-profiles-import">Profile importieren</span>
+              </button>
+            </div>
+            <div class="card">
+              <div class="card-title"><span>🎯</span> <span id="lbl-filament-mapping">Filament-Profil-Mapping (pro Slot)</span></div>
+              <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="filament-mapping-hint">
+                Festes Orca-Profil pro AMS-Slot. Beim Slicer-Sync sendet die Bridge dieses Profil statt „Generic".
+              </div>
+              <div id="filament-mapping-list"></div>
+              <button class="btn btn-sm" style="background:var(--accent);color:#fff;margin-top:8px" onclick="saveFilamentMapping()"><span id="lbl-filament-mapping-save">Mapping speichern</span></button>
+            </div>
+            <div class="card">
+              <div class="card-title"><span>👁</span> <span id="lbl-visible-vendors">Sichtbare Hersteller (Profil-Dropdown)</span></div>
+              <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="visible-vendors-hint">
+                Nur diese Hersteller erscheinen im Slot-Profil-Dropdown. Nichts ausgewählt = alle anzeigen. „Generic" und eigene Profile sind immer sichtbar.
+              </div>
+              <input type="text" id="vendor-filter-search" placeholder="Hersteller suchen…" oninput="renderVendorChecklist()"
+                style="width:100%;padding:6px 10px;margin-bottom:8px;background:var(--raised);border:1px solid var(--border);border-radius:6px;color:var(--txt);font-size:12px">
+              <div id="visible-vendors-list" style="max-height:260px;overflow-y:auto;border:1px solid var(--border);border-radius:6px;padding:8px"></div>
+              <button class="btn btn-sm" style="background:var(--accent);color:#fff;margin-top:8px" onclick="saveVisibleVendors()"><span id="lbl-visible-vendors-save">Auswahl speichern</span></button>
+            </div>
+          </div>
+
+          <!-- System -->
+          <div class="set-group" id="setgrp-system">
+            <div class="card">
+              <div class="card-title"><span>⚙</span> <span id="modal-sec-version">Version</span></div>
+              <div class="update-row">
+                <span id="s-version-label" style="font-size:13px;color:var(--txt)">–</span>
+                <button class="btn btn-sm" style="background:var(--raised);color:var(--txt)" onclick="checkUpdate()" id="btn-update-check">🔄 <span id="lbl-update-check">Auf Updates prüfen</span></button>
+              </div>
+              <div class="update-status" id="update-status" style="margin-top:6px"></div>
+              <button class="btn btn-sm btn-accent" id="btn-update-apply" style="display:none;margin-top:8px" onclick="applyUpdate()">
+                <span id="lbl-update-apply">Jetzt installieren</span>
+              </button>
+              <div id="update-changelog" style="display:none;margin-top:10px;background:var(--raised);border-radius:6px;padding:10px;font-size:11px;font-family:var(--mono);color:var(--txt2);white-space:pre-wrap;max-height:180px;overflow-y:auto;line-height:1.6"></div>
+            </div>
+          </div>
+
+          <button class="modal-save" onclick="saveSettings()" id="btn-save-settings" style="margin-top:14px">Speichern &amp; Neustart</button>
+        </div>
+      </div>
+    </div>
   </main>
 </div>
 
@@ -539,13 +596,14 @@
   <button class="bnav-btn" onclick="showPanel('printers');loadPrinterTab()" id="bnb-printers"><span class="bnav-icon">🖨</span>Drucker</button>
   <button class="bnav-btn" onclick="showPanel('store');loadStore()" id="bnb-store"><span class="bnav-icon">🗂</span>Browser</button>
   <button class="bnav-btn" onclick="showPanel('console');clearLogBadge()" id="bnb-console"><span class="bnav-icon">≡</span>Log<span id="log-badge-bot" style="display:none;margin-left:3px;background:var(--err);color:#fff;border-radius:10px;font-size:10px;padding:1px 4px;font-weight:700"></span></button>
+  <button class="bnav-btn" onclick="showPanel('settings')" id="bnb-settings"><span class="bnav-icon">⚙</span>Setup</button>
 </nav>
 
 
 <!-- Web-Upload-Verify-Dialog -->
 <div class="modal-overlay" id="store-web-verify-dialog" onclick="if(event.target===this)closeStoreWebVerifyDialog()">
   <div class="modal-box" style="max-width:420px;width:100%">
-    <div class="modal-header" style="margin-bottom:12px">
+    <div class="modal-header" style="margin-bottom:14px">
       <span class="modal-title" id="store-web-verify-title">Datei verifizieren</span>
       <button onclick="closeStoreWebVerifyDialog()" style="background:none;border:none;font-size:18px;cursor:pointer;color:var(--txt2)">✕</button>
     </div>
@@ -560,24 +618,31 @@
 
 <!-- Filament-Slot-Dialog -->
 <div class="modal-overlay" id="filament-dialog" onclick="if(event.target===this)closeFilamentDialog()">
-  <div class="modal-box" style="max-width:380px;width:100%;gap:0">
+  <div class="modal-box" style="max-width:380px;width:100%">
     <div class="modal-header" style="margin-bottom:14px">
       <span class="modal-title" id="fd-title" style="font-size:14px;word-break:break-all"></span>
       <button onclick="closeFilamentDialog()" style="background:none;border:none;font-size:18px;cursor:pointer;color:var(--txt2)">✕</button>
     </div>
-    <div id="fd-options-section" style="margin-bottom:6px">
-      <p id="fd-options-title" style="font-size:12px;color:var(--txt2);margin:0 0 6px 0"></p>
-      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px;padding:8px 10px;background:var(--raised);border:1px solid var(--border);border-radius:8px">
-        <input type="checkbox" id="fd-auto-leveling" style="width:auto;margin:0" onchange="_printOptionsAutoLeveling=this.checked?1:0">
-        <label id="lbl-fd-auto-leveling" style="margin:0;cursor:pointer;line-height:1.2" for="fd-auto-leveling"></label>
+    <p id="fd-slots-hint" style="font-size:12px;color:var(--txt2);margin-bottom:10px">GCode-Kanal → AMS-Slot zuweisen:</p>
+    <div id="fd-slots" style="display:flex;flex-direction:column;gap:8px;margin-bottom:16px"></div>
+    <div id="fd-objects-section" style="display:none;margin-bottom:16px">
+      <button type="button" id="fd-objects-toggle" onclick="toggleFdObjects()"
+        style="display:flex;align-items:center;gap:8px;width:100%;padding:8px 10px;background:var(--raised);border:1px solid var(--border);border-radius:8px;color:var(--txt);cursor:pointer;font-size:12px;text-align:left">
+        <span id="fd-objects-arrow" style="font-size:10px;transition:transform .15s">▶</span>
+        <span>✂ <span id="fd-objects-toggle-lbl">Objekte überspringen</span></span>
+        <span id="fd-objects-count" style="margin-left:auto;color:var(--txt2);font-weight:600"></span>
+      </button>
+      <div id="fd-objects-body" style="display:none;margin-top:8px">
+        <div id="fd-objects-svg" style="display:none;background:var(--raised);border:1px solid var(--border);border-radius:8px;padding:6px;margin-bottom:8px;text-align:center"></div>
+        <div id="fd-objects" style="display:flex;flex-direction:column;gap:6px;max-height:140px;overflow-y:auto"></div>
       </div>
     </div>
-    <p id="fd-slots-hint" style="font-size:12px;color:var(--txt2);margin:0 0 6px 0">GCode-Kanal → AMS-Slot zuweisen:</p>
-    <div id="fd-slots" style="display:flex;flex-direction:column;gap:8px;margin-bottom:16px"></div>
-    <div id="fd-objects-section" style="display:none;margin-bottom:14px">
-      <p id="fd-objects-hint" style="font-size:12px;color:var(--txt2);margin:0 0 6px 0">Objekte überspringen (optional):</p>
-      <div id="fd-objects-svg" style="display:none;background:var(--raised);border:1px solid var(--border);border-radius:8px;padding:6px;margin-bottom:8px;text-align:center"></div>
-      <div id="fd-objects" style="display:flex;flex-direction:column;gap:6px;max-height:140px;overflow-y:auto"></div>
+    <div style="margin-bottom:14px;padding:10px 12px;background:var(--raised);border-radius:8px;border:1px solid var(--border)">
+      <div style="font-size:11px;font-weight:600;color:var(--txt2);margin-bottom:8px;text-transform:uppercase;letter-spacing:.05em" id="fd-options-title">Druckoptionen</div>
+      <div style="display:flex;align-items:center;gap:8px">
+        <input type="checkbox" id="fd-auto-leveling" style="width:auto;margin:0">
+        <label for="fd-auto-leveling" style="margin:0;cursor:pointer;font-size:13px" id="fd-lbl-auto-leveling">Auto-Leveling</label>
+      </div>
     </div>
     <div style="display:flex;gap:8px;justify-content:flex-end">
       <button id="fd-cancel" onclick="closeFilamentDialog()" style="padding:8px 16px;background:var(--raised);border:1px solid var(--border);border-radius:8px;color:var(--txt);cursor:pointer">Abbrechen</button>
@@ -615,7 +680,7 @@
     <div id="skip-list" style="display:flex;flex-direction:column;gap:6px;max-height:200px;overflow-y:auto;margin-bottom:12px"></div>
     <div id="skip-status" style="font-size:12px;color:var(--txt2);min-height:16px;margin-bottom:8px"></div>
     <div style="display:flex;gap:8px;justify-content:flex-end">
-      <button id="skip-cancel" onclick="closeSkipDialog()" style="padding:8px 16px;background:var(--raised);border:1px solid var(--border);border-radius:8px;color:var(--txt);cursor:pointer"></button>
+      <button onclick="closeSkipDialog()" style="padding:8px 16px;background:var(--raised);border:1px solid var(--border);border-radius:8px;color:var(--txt);cursor:pointer">Abbrechen</button>
       <button id="skip-confirm" onclick="confirmSkip()" style="padding:8px 18px;background:var(--accent);color:#fff;border:none;border-radius:8px;cursor:pointer;font-weight:600">Überspringen</button>
     </div>
   </div>
@@ -651,15 +716,15 @@
       </div>
     </div>
     <div style="display:grid;grid-template-columns:repeat(3,1fr);gap:8px;margin-bottom:8px">
-      <button class="ace-dry-preset-btn" data-preset="pla" onclick="aceDryDialogPreset('pla')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer"></button>
-      <button class="ace-dry-preset-btn" data-preset="pla_plus" onclick="aceDryDialogPreset('pla_plus')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer"></button>
-      <button class="ace-dry-preset-btn" data-preset="petg" onclick="aceDryDialogPreset('petg')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer"></button>
-      <button class="ace-dry-preset-btn" data-preset="tpu" onclick="aceDryDialogPreset('tpu')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer"></button>
-      <button class="ace-dry-preset-btn" data-preset="abs_asa" onclick="aceDryDialogPreset('abs_asa')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer"></button>
-      <button class="ace-dry-preset-btn" data-preset="pa_pc" onclick="aceDryDialogPreset('pa_pc')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer"></button>
-      <button class="ace-dry-preset-btn" data-preset="custom_1" onclick="aceDryDialogPreset('custom_1')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer"></button>
-      <button class="ace-dry-preset-btn" data-preset="custom_2" onclick="aceDryDialogPreset('custom_2')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer"></button>
-      <button class="ace-dry-preset-btn" data-preset="custom_3" onclick="aceDryDialogPreset('custom_3')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer"></button>
+      <button class="ace-dry-preset-btn" data-preset="pla" onclick="aceDryDialogPreset('pla')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer">PLA</button>
+      <button class="ace-dry-preset-btn" data-preset="pla_plus" onclick="aceDryDialogPreset('pla_plus')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer">PLA+</button>
+      <button class="ace-dry-preset-btn" data-preset="petg" onclick="aceDryDialogPreset('petg')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer">PETG</button>
+      <button class="ace-dry-preset-btn" data-preset="tpu" onclick="aceDryDialogPreset('tpu')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer">TPU</button>
+      <button class="ace-dry-preset-btn" data-preset="abs_asa" onclick="aceDryDialogPreset('abs_asa')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer">ABS / ASA</button>
+      <button class="ace-dry-preset-btn" data-preset="pa_pc" onclick="aceDryDialogPreset('pa_pc')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer">PA / PC</button>
+      <button class="ace-dry-preset-btn" data-preset="custom_1" onclick="aceDryDialogPreset('custom_1')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer">Custom 1</button>
+      <button class="ace-dry-preset-btn" data-preset="custom_2" onclick="aceDryDialogPreset('custom_2')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer">Custom 2</button>
+      <button class="ace-dry-preset-btn" data-preset="custom_3" onclick="aceDryDialogPreset('custom_3')" style="padding:8px;border-radius:8px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer">Custom 3</button>
     </div>
     <div id="ace-dry-dialog-custom-name-row" style="display:none;align-items:center;gap:12px;margin-bottom:14px">
       <label id="ace-dry-dialog-custom-name-label" style="min-width:190px;font-size:12px;color:var(--txt)">Custom Name</label>

web/themes/default/style.css

@@ -212,6 +212,24 @@ canvas.tchart{width:100%;height:60px;display:block;border-radius:6px;background:
 .panel{display:none}
 .panel.active{display:block}
 
+/* ── SETTINGS (Master-Detail) ── */
+.settings-wrap{display:grid;grid-template-columns:200px 1fr;gap:16px;align-items:start}
+.settings-cats{display:flex;flex-direction:column;gap:4px;position:sticky;top:12px}
+.set-cat{display:flex;align-items:center;gap:8px;padding:10px 12px;border-radius:8px;
+  border:1px solid transparent;background:var(--raised);color:var(--txt2);cursor:pointer;
+  font-size:13px;text-align:left;transition:background .15s,color .15s}
+.set-cat:hover{color:var(--txt)}
+.set-cat.active{background:var(--accent);color:#fff;border-color:var(--accent)}
+.set-group{display:none}
+.set-group.active{display:block}
+.set-group .card{margin-bottom:14px}
+@media(max-width:768px){
+  .settings-wrap{grid-template-columns:1fr}
+  .settings-cats{flex-direction:row;flex-wrap:wrap;position:static;overflow-x:auto}
+  .set-cat{flex:1;min-width:auto;justify-content:center;padding:8px 6px;font-size:12px}
+  .set-cat .nav-text{display:inline}
+}
+
 /* ── FILE BROWSER UPLOAD ZONE ── */
 #store-upload-zone{
   display:flex;flex-direction:column;align-items:center;justify-content:center;

web/translations/de.json

@@ -69,13 +69,6 @@
   "ace_dry_dialog_save_restart": "Speichern & Neustart",
   "ace_dry_dialog_custom_name": "Eigener Name",
   "ace_dry_dialog_reset_default": "Auf Standard zurücksetzen",
-  "ace_dry_preset_pla": "PLA",
-  "ace_dry_preset_pla_plus": "PLA+",
-  "ace_dry_preset_petg": "PETG",
-  "ace_dry_preset_tpu": "TPU",
-  "ace_dry_preset_abs_asa": "ABS / ASA",
-  "ace_dry_preset_pa_pc": "PA / PC",
-  "ace_dry_preset_custom": "Custom",
   "cam_placeholder": "📷 Kamera nicht gestartet",
   "cam_stream_unavailable": "Stream nicht verfügbar",
   "btn_cam_start": "▶ Kamera",
@@ -134,8 +127,21 @@
   "settings_title": "Einstellungen",
   "settings_connection": "Verbindung",
   "settings_print": "Druckeinstellungen",
-  "settings_poll": "Poll-Intervall",
+  "settings_poll": "Poll-Intervall (Sekunden)",
   "settings_version": "Version",
+  "nav_settings": "Einstellungen",
+  "settings_cat_display": "Darstellung",
+  "settings_cat_filament": "Filament",
+  "settings_cat_language": "Sprache",
+  "settings_cat_theme": "Hell / Dunkel umschalten",
+  "settings_filament_mapping": "Filament-Profil-Mapping (pro Slot)",
+  "settings_filament_mapping_save": "Mapping speichern",
+  "settings_visible_vendors": "Sichtbare Hersteller (Profil-Dropdown)",
+  "settings_visible_vendors_hint": "Nur diese Hersteller erscheinen im Slot-Profil-Dropdown. Nichts ausgewählt = alle anzeigen. „Generic\" und eigene Profile sind immer sichtbar.",
+  "settings_visible_vendors_save": "Auswahl speichern",
+  "progress_action_print": "Drucken",
+  "progress_action_slots": "Slots zuordnen",
+  "progress_action_clear": "Leeren",
   "settings_save": "Speichern & Neustart",
   "settings_printer_name": "Drucker-Name",
   "settings_printer_ip": "Drucker-IP",
@@ -148,12 +154,7 @@
   "settings_default_slot": "Standard-Slot (Einfarbdruck)",
   "settings_slot_auto": "Auto (alle belegten Slots)",
   "settings_auto_leveling": "Auto-Leveling vor Druck",
-  "fd_options_title": "Optionen",
-  "print_auto_leveling": "Auto-Leveling für diesen Druck",
   "settings_camera_on_print": "Kamera bei Druckstart einschalten",
-  "settings_file_ready_mode": "Druckdialog starten",
-  "settings_file_ready_banner": "Druckleiste",
-  "settings_file_ready_dialog": "Druckdialog",
   "settings_web_upload_warning": "Warnung bei Web-Upload-Druck anzeigen",
   "update_check": "Auf Updates prüfen",
   "update_checking": "Prüfe...",
@@ -191,21 +192,7 @@
   "orca_profile_done": "Importiert",
   "orca_profile_skipped": "übersprungen",
   "log_dir_all": "Alle",
-  "log_dir_rx": "RX",
-  "log_dir_tx": "TX",
-  "log_dir_label": "Richtung:",
   "log_lvl_label": "Level:",
-  "log_lvl_err": "⛔ Fehler",
-  "log_lvl_warn": "⚠ Warnung",
-  "log_topic_label": "Thema:",
-  "log_topic_ams": "AMS",
-  "log_topic_print": "Druck",
-  "log_topic_info": "Info",
-  "log_topic_status": "Status",
-  "log_download": "⬇ Download",
-  "log_auto": "⬇ Auto",
-  "log_clear": "✕ Leeren",
-  "log_filter_placeholder": "Filtern…",
   "file_ready_btn": "▶ Druck starten",
   "file_slots_btn": "🎨 Slots wählen",
   "file_cancel_btn": "✕ Abbrechen",
@@ -218,9 +205,8 @@
   "skip_select_at_least_one": "Bitte mindestens ein Objekt wählen.",
   "skip_sending": "Sende …",
   "skip_success": "Objekte werden übersprungen.",
-  "skip_cancel": "Abbrechen",
-  "skip_confirm": "Überspringen",
   "fd_objects_hint": "Objekte überspringen (optional):",
+  "fd_objects_toggle": "Objekte überspringen",
   "fd_slots_hint": "GCode-Kanal → AMS-Slot zuweisen:",
   "fd_cancel": "Abbrechen",
   "fd_print": "▶ Drucken",
@@ -266,11 +252,40 @@
   "store_upload_busy": "⏳ Hochladen…",
   "store_upload_success": "✓ {file}",
   "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Nur GCode-Dateien erlaubt (.gcode, .3mf, .bgcode)",
   "sf_all": "Alle",
   "sf_ok": "✓ Erfolgreich",
   "sf_err": "✗ Fehler",
   "sf_new": "Neu",
   "ss_date": "↓ Datum",
   "ss_name": "A–Z Name",
-  "ss_dur": "⏱ Druckzeit"
+  "ss_dur": "⏱ Druckzeit",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Custom",
+  "fd_options_title": "Optionen",
+  "print_auto_leveling": "Auto-Leveling für diesen Druck",
+  "settings_file_ready_mode": "Druckdialog starten",
+  "settings_file_ready_banner": "Druckleiste",
+  "settings_file_ready_dialog": "Druckdialog",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Richtung:",
+  "log_lvl_err": "⛔ Fehler",
+  "log_lvl_warn": "⚠ Warnung",
+  "log_topic_label": "Thema:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Druck",
+  "log_topic_info": "Info",
+  "log_topic_status": "Status",
+  "log_download": "⬇ Download",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Leeren",
+  "log_filter_placeholder": "Filtern…",
+  "skip_cancel": "Abbrechen",
+  "skip_confirm": "Überspringen"
 }

web/translations/en.json

@@ -134,7 +134,20 @@
   "settings_title": "Settings",
   "settings_connection": "Connection",
   "settings_print": "Print Settings",
-  "settings_poll": "Poll Interval",
+  "settings_poll": "Poll Interval (seconds)",
+  "nav_settings": "Settings",
+  "settings_cat_display": "Appearance",
+  "settings_cat_filament": "Filament",
+  "settings_cat_language": "Language",
+  "settings_cat_theme": "Toggle light / dark",
+  "settings_filament_mapping": "Filament profile mapping (per slot)",
+  "settings_filament_mapping_save": "Save mapping",
+  "settings_visible_vendors": "Visible vendors (profile dropdown)",
+  "settings_visible_vendors_hint": "Only these vendors appear in the slot profile dropdown. Nothing selected = show all. \"Generic\" and your own profiles are always visible.",
+  "settings_visible_vendors_save": "Save selection",
+  "progress_action_print": "Print",
+  "progress_action_slots": "Map slots",
+  "progress_action_clear": "Clear",
   "settings_version": "Version",
   "settings_save": "Save & Restart",
   "settings_printer_name": "Printer Name",
@@ -150,10 +163,10 @@
   "settings_auto_leveling": "Auto-Leveling Default",
   "fd_options_title": "Print Options",
   "print_auto_leveling": "Auto-Leveling",
-  "settings_camera_on_print": "Turn camera on at print start",
   "settings_file_ready_mode": "Start Print Behavior",
   "settings_file_ready_banner": "Print Bar",
   "settings_file_ready_dialog": "Print Dialog",
+  "settings_camera_on_print": "Turn camera on at print start",
   "settings_web_upload_warning": "Show warning when printing web uploads",
   "update_check": "Check for Updates",
   "update_checking": "Checking...",
@@ -215,12 +228,13 @@
   "skip_btn_label": "Objects",
   "skip_no_objects": "No objects in this print.",
   "skip_already": "skipped",
+  "skip_cancel": "Cancel",
+  "skip_confirm": "Skip",
   "skip_select_at_least_one": "Please pick at least one object.",
   "skip_sending": "Sending …",
   "skip_success": "Objects will be skipped.",
-  "skip_cancel": "Cancel",
-  "skip_confirm": "Skip",
   "fd_objects_hint": "Skip objects (optional):",
+  "fd_objects_toggle": "Skip objects",
   "fd_slots_hint": "Assign GCode channel to AMS slot:",
   "fd_cancel": "Cancel",
   "fd_print": "▶ Print",
@@ -266,6 +280,7 @@
   "store_upload_busy": "⏳ Uploading…",
   "store_upload_success": "✓ {file}",
   "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Only GCode files allowed (.gcode, .3mf, .bgcode)",
   "sf_all": "All",
   "sf_ok": "✓ Completed",
   "sf_err": "✗ Failed",

web/translations/es.json

@@ -69,13 +69,6 @@
   "ace_dry_dialog_save_restart": "Guardar y reiniciar",
   "ace_dry_dialog_custom_name": "Nombre personalizado",
   "ace_dry_dialog_reset_default": "Restablecer valores predeterminados",
-  "ace_dry_preset_pla": "PLA",
-  "ace_dry_preset_pla_plus": "PLA+",
-  "ace_dry_preset_petg": "PETG",
-  "ace_dry_preset_tpu": "TPU",
-  "ace_dry_preset_abs_asa": "ABS / ASA",
-  "ace_dry_preset_pa_pc": "PA / PC",
-  "ace_dry_preset_custom": "Personalizado",
   "cam_placeholder": "📷 Cámara no iniciada",
   "cam_stream_unavailable": "Stream no disponible",
   "btn_cam_start": "▶ Cámara",
@@ -134,7 +127,20 @@
   "settings_title": "Configuración",
   "settings_connection": "Conexión",
   "settings_print": "Ajustes de impresión",
-  "settings_poll": "Intervalo de sondeo",
+  "settings_poll": "Intervalo de sondeo (segundos)",
+  "nav_settings": "Ajustes",
+  "settings_cat_display": "Apariencia",
+  "settings_cat_filament": "Filamento",
+  "settings_cat_language": "Idioma",
+  "settings_cat_theme": "Alternar claro / oscuro",
+  "settings_filament_mapping": "Asignación de perfil de filamento (por ranura)",
+  "settings_filament_mapping_save": "Guardar asignación",
+  "settings_visible_vendors": "Fabricantes visibles (lista de perfiles)",
+  "settings_visible_vendors_hint": "Solo estos fabricantes aparecen en la lista de perfiles de ranura. Nada seleccionado = mostrar todos. «Generic» y tus propios perfiles siempre son visibles.",
+  "settings_visible_vendors_save": "Guardar selección",
+  "progress_action_print": "Imprimir",
+  "progress_action_slots": "Asignar ranuras",
+  "progress_action_clear": "Vaciar",
   "settings_version": "Versión",
   "settings_save": "Guardar y reiniciar",
   "settings_printer_name": "Nombre de impresora",
@@ -148,12 +154,7 @@
   "settings_default_slot": "Ranura predeterminada (un color)",
   "settings_slot_auto": "Auto (todos los slots cargados)",
   "settings_auto_leveling": "Autonivelado antes de imprimir",
-  "fd_options_title": "Opciones",
-  "print_auto_leveling": "Autonivelado para esta impresión",
   "settings_camera_on_print": "Encender cámara al iniciar impresión",
-  "settings_file_ready_mode": "Iniciar diálogo de impresión",
-  "settings_file_ready_banner": "Barra de impresión",
-  "settings_file_ready_dialog": "Diálogo de impresión",
   "settings_web_upload_warning": "Mostrar advertencia al imprimir subidas web",
   "update_check": "Buscar actualizaciones",
   "update_checking": "Comprobando...",
@@ -191,21 +192,7 @@
   "orca_profile_done": "Importado",
   "orca_profile_skipped": "omitido",
   "log_dir_all": "Todos",
-  "log_dir_rx": "RX",
-  "log_dir_tx": "TX",
-  "log_dir_label": "Dirección:",
   "log_lvl_label": "Nivel:",
-  "log_lvl_err": "⛔ Errores",
-  "log_lvl_warn": "⚠ Avisos",
-  "log_topic_label": "Tema:",
-  "log_topic_ams": "AMS",
-  "log_topic_print": "Impresión",
-  "log_topic_info": "Info",
-  "log_topic_status": "Estado",
-  "log_download": "⬇ Descargar",
-  "log_auto": "⬇ Auto",
-  "log_clear": "✕ Limpiar",
-  "log_filter_placeholder": "Filtrar…",
   "file_ready_btn": "▶ Iniciar impresión",
   "file_slots_btn": "🎨 Seleccionar ranuras",
   "file_cancel_btn": "✕ Cancelar",
@@ -218,9 +205,8 @@
   "skip_select_at_least_one": "Selecciona al menos un objeto.",
   "skip_sending": "Enviando …",
   "skip_success": "Se omitirán los objetos.",
-  "skip_cancel": "Cancelar",
-  "skip_confirm": "Omitir",
   "fd_objects_hint": "Omitir objetos (opcional):",
+  "fd_objects_toggle": "Omitir objetos",
   "fd_slots_hint": "Asignar canal GCode a la ranura AMS:",
   "fd_cancel": "Cancelar",
   "fd_print": "▶ Imprimir",
@@ -266,11 +252,40 @@
   "store_upload_busy": "⏳ Subiendo…",
   "store_upload_success": "✓ {file}",
   "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Solo se permiten archivos GCode (.gcode, .3mf, .bgcode)",
   "sf_all": "Todos",
   "sf_ok": "✓ Completado",
   "sf_err": "✗ Fallido",
   "sf_new": "Nuevo",
   "ss_date": "↓ Fecha",
   "ss_name": "A–Z Nombre",
-  "ss_dur": "⏱ Tiempo de impresión"
+  "ss_dur": "⏱ Tiempo de impresión",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Personalizado",
+  "fd_options_title": "Opciones",
+  "print_auto_leveling": "Autonivelado para esta impresión",
+  "settings_file_ready_mode": "Iniciar diálogo de impresión",
+  "settings_file_ready_banner": "Barra de impresión",
+  "settings_file_ready_dialog": "Diálogo de impresión",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Dirección:",
+  "log_lvl_err": "⛔ Errores",
+  "log_lvl_warn": "⚠ Avisos",
+  "log_topic_label": "Tema:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Impresión",
+  "log_topic_info": "Info",
+  "log_topic_status": "Estado",
+  "log_download": "⬇ Descargar",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Limpiar",
+  "log_filter_placeholder": "Filtrar…",
+  "skip_cancel": "Cancelar",
+  "skip_confirm": "Omitir"
 }

web/translations/fr.json

@@ -69,13 +69,6 @@
   "ace_dry_dialog_save_restart": "Enregistrer et redémarrer",
   "ace_dry_dialog_custom_name": "Nom personnalisé",
   "ace_dry_dialog_reset_default": "Réinitialiser",
-  "ace_dry_preset_pla": "PLA",
-  "ace_dry_preset_pla_plus": "PLA+",
-  "ace_dry_preset_petg": "PETG",
-  "ace_dry_preset_tpu": "TPU",
-  "ace_dry_preset_abs_asa": "ABS / ASA",
-  "ace_dry_preset_pa_pc": "PA / PC",
-  "ace_dry_preset_custom": "Personnalisé",
   "cam_placeholder": "📷 Caméra non démarrée",
   "cam_stream_unavailable": "Flux indisponible",
   "btn_cam_start": "▶ Caméra",
@@ -134,7 +127,20 @@
   "settings_title": "Paramètres",
   "settings_connection": "Connexion",
   "settings_print": "Paramètres d'impression",
-  "settings_poll": "Intervalle de sondage",
+  "settings_poll": "Intervalle de sondage (secondes)",
+  "nav_settings": "Paramètres",
+  "settings_cat_display": "Apparence",
+  "settings_cat_filament": "Filament",
+  "settings_cat_language": "Langue",
+  "settings_cat_theme": "Basculer clair / sombre",
+  "settings_filament_mapping": "Mappage du profil de filament (par emplacement)",
+  "settings_filament_mapping_save": "Enregistrer le mappage",
+  "settings_visible_vendors": "Fabricants visibles (liste des profils)",
+  "settings_visible_vendors_hint": "Seuls ces fabricants apparaissent dans la liste des profils d'emplacement. Rien de sélectionné = tout afficher. « Generic » et vos propres profils sont toujours visibles.",
+  "settings_visible_vendors_save": "Enregistrer la sélection",
+  "progress_action_print": "Imprimer",
+  "progress_action_slots": "Affecter les emplacements",
+  "progress_action_clear": "Vider",
   "settings_version": "Version",
   "settings_save": "Enregistrer et redémarrer",
   "settings_printer_name": "Nom de l'imprimante",
@@ -148,12 +154,7 @@
   "settings_default_slot": "Slot par défaut (couleur unique)",
   "settings_slot_auto": "Auto (tous les slots chargés)",
   "settings_auto_leveling": "Mise à niveau auto avant impression",
-  "fd_options_title": "Options",
-  "print_auto_leveling": "Mise à niveau auto pour cette impression",
   "settings_camera_on_print": "Activer la caméra au démarrage de l'impression",
-  "settings_file_ready_mode": "Démarrer le dialogue d'impression",
-  "settings_file_ready_banner": "Barre d'impression",
-  "settings_file_ready_dialog": "Dialogue d'impression",
   "settings_web_upload_warning": "Afficher un avertissement lors de l'impression de fichiers web",
   "update_check": "Vérifier les mises à jour",
   "update_checking": "Vérification…",
@@ -191,21 +192,7 @@
   "orca_profile_done": "Importé",
   "orca_profile_skipped": "ignoré",
   "log_dir_all": "Tout",
-  "log_dir_rx": "RX",
-  "log_dir_tx": "TX",
-  "log_dir_label": "Sens :",
   "log_lvl_label": "Niveau :",
-  "log_lvl_err": "⛔ Erreurs",
-  "log_lvl_warn": "⚠ Avert.",
-  "log_topic_label": "Sujet :",
-  "log_topic_ams": "AMS",
-  "log_topic_print": "Impression",
-  "log_topic_info": "Info",
-  "log_topic_status": "Statut",
-  "log_download": "⬇ Télécharger",
-  "log_auto": "⬇ Auto",
-  "log_clear": "✕ Effacer",
-  "log_filter_placeholder": "Filtrer…",
   "file_ready_btn": "▶ Lancer l'impression",
   "file_slots_btn": "🎨 Choisir les slots",
   "file_cancel_btn": "✕ Annuler",
@@ -218,9 +205,8 @@
   "skip_select_at_least_one": "Veuillez sélectionner au moins un objet.",
   "skip_sending": "Envoi …",
   "skip_success": "Les objets seront ignorés.",
-  "skip_cancel": "Annuler",
-  "skip_confirm": "Ignorer",
   "fd_objects_hint": "Ignorer des objets (optionnel) :",
+  "fd_objects_toggle": "Ignorer des objets",
   "fd_slots_hint": "Associer le canal GCode au slot AMS :",
   "fd_cancel": "Annuler",
   "fd_print": "▶ Imprimer",
@@ -266,12 +252,40 @@
   "store_upload_busy": "⏳ Envoi en cours…",
   "store_upload_success": "✓ {file}",
   "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Seuls les fichiers GCode sont autorisés (.gcode, .3mf, .bgcode)",
   "sf_all": "Tout",
   "sf_ok": "✓ Terminés",
   "sf_err": "✗ Échoués",
   "sf_new": "Nouveau",
   "ss_date": "↓ Date",
   "ss_name": "A–Z Nom",
-  "ss_dur": "⏱ Durée d'impression"
+  "ss_dur": "⏱ Durée d'impression",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Personnalisé",
+  "fd_options_title": "Options",
+  "print_auto_leveling": "Mise à niveau auto pour cette impression",
+  "settings_file_ready_mode": "Démarrer le dialogue d'impression",
+  "settings_file_ready_banner": "Barre d'impression",
+  "settings_file_ready_dialog": "Dialogue d'impression",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Sens :",
+  "log_lvl_err": "⛔ Erreurs",
+  "log_lvl_warn": "⚠ Avert.",
+  "log_topic_label": "Sujet :",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Impression",
+  "log_topic_info": "Info",
+  "log_topic_status": "Statut",
+  "log_download": "⬇ Télécharger",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Effacer",
+  "log_filter_placeholder": "Filtrer…",
+  "skip_cancel": "Annuler",
+  "skip_confirm": "Ignorer"
 }
-

web/translations/zh-cn.json

@@ -69,13 +69,6 @@
   "ace_dry_dialog_save_restart": "保存并重启",
   "ace_dry_dialog_custom_name": "自定义名称",
   "ace_dry_dialog_reset_default": "恢复默认",
-  "ace_dry_preset_pla": "PLA",
-  "ace_dry_preset_pla_plus": "PLA+",
-  "ace_dry_preset_petg": "PETG",
-  "ace_dry_preset_tpu": "TPU",
-  "ace_dry_preset_abs_asa": "ABS / ASA",
-  "ace_dry_preset_pa_pc": "PA / PC",
-  "ace_dry_preset_custom": "自定义",
   "cam_placeholder": "📷 相机未启动",
   "cam_stream_unavailable": "视频流不可用",
   "btn_cam_start": "▶ 相机",
@@ -134,7 +127,20 @@
   "settings_title": "设置",
   "settings_connection": "连接",
   "settings_print": "打印设置",
-  "settings_poll": "轮询间隔",
+  "settings_poll": "轮询间隔（秒）",
+  "nav_settings": "设置",
+  "settings_cat_display": "外观",
+  "settings_cat_filament": "耗材",
+  "settings_cat_language": "语言",
+  "settings_cat_theme": "切换浅色 / 深色",
+  "settings_filament_mapping": "耗材配置映射（每槽位）",
+  "settings_filament_mapping_save": "保存映射",
+  "settings_visible_vendors": "可见厂商（配置下拉框）",
+  "settings_visible_vendors_hint": "仅这些厂商会出现在槽位配置下拉框中。未选择 = 显示全部。“Generic”和您自己的配置始终可见。",
+  "settings_visible_vendors_save": "保存选择",
+  "progress_action_print": "打印",
+  "progress_action_slots": "分配槽位",
+  "progress_action_clear": "清除",
   "settings_version": "版本",
   "settings_save": "保存并重启",
   "settings_printer_name": "打印机名称",
@@ -148,12 +154,7 @@
   "settings_default_slot": "默认槽位 (单色)",
   "settings_slot_auto": "自动 (所有已装载槽位)",
   "settings_auto_leveling": "打印前自动调平",
-  "fd_options_title": "选项",
-  "print_auto_leveling": "本次打印自动调平",
   "settings_camera_on_print": "打印开始时开启相机",
-  "settings_file_ready_mode": "开始打印对话框",
-  "settings_file_ready_banner": "打印栏",
-  "settings_file_ready_dialog": "打印对话框",
   "settings_web_upload_warning": "打印网页上传文件时显示警告",
   "update_check": "检查更新",
   "update_checking": "检查中...",
@@ -191,21 +192,7 @@
   "orca_profile_done": "已导入",
   "orca_profile_skipped": "跳过",
   "log_dir_all": "全部",
-  "log_dir_rx": "RX",
-  "log_dir_tx": "TX",
-  "log_dir_label": "方向:",
   "log_lvl_label": "级别:",
-  "log_lvl_err": "⛔ 错误",
-  "log_lvl_warn": "⚠ 警告",
-  "log_topic_label": "主题:",
-  "log_topic_ams": "AMS",
-  "log_topic_print": "打印",
-  "log_topic_info": "信息",
-  "log_topic_status": "状态",
-  "log_download": "⬇ 下载",
-  "log_auto": "⬇ 自动",
-  "log_clear": "✕ 清空",
-  "log_filter_placeholder": "筛选…",
   "file_ready_btn": "▶ 开始打印",
   "file_slots_btn": "🎨 选择槽位",
   "file_cancel_btn": "✕ 取消",
@@ -218,9 +205,8 @@
   "skip_select_at_least_one": "请至少选择一个对象。",
   "skip_sending": "发送中 …",
   "skip_success": "对象将被跳过。",
-  "skip_cancel": "取消",
-  "skip_confirm": "跳过",
   "fd_objects_hint": "跳过对象 (可选):",
+  "fd_objects_toggle": "跳过对象",
   "fd_slots_hint": "将 GCode 通道分配到 AMS 槽位:",
   "fd_cancel": "取消",
   "fd_print": "▶ 打印",
@@ -266,11 +252,40 @@
   "store_upload_busy": "⏳ 上传中…",
   "store_upload_success": "✓ {file}",
   "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ 仅允许 GCode 文件 (.gcode, .3mf, .bgcode)",
   "sf_all": "全部",
   "sf_ok": "✓ 已完成",
   "sf_err": "✗ 失败",
   "sf_new": "新",
   "ss_date": "↓ 日期",
   "ss_name": "A–Z 名称",
-  "ss_dur": "⏱ 打印时间"
+  "ss_dur": "⏱ 打印时间",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "自定义",
+  "fd_options_title": "选项",
+  "print_auto_leveling": "本次打印自动调平",
+  "settings_file_ready_mode": "开始打印对话框",
+  "settings_file_ready_banner": "打印栏",
+  "settings_file_ready_dialog": "打印对话框",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "方向:",
+  "log_lvl_err": "⛔ 错误",
+  "log_lvl_warn": "⚠ 警告",
+  "log_topic_label": "主题:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "打印",
+  "log_topic_info": "信息",
+  "log_topic_status": "状态",
+  "log_download": "⬇ 下载",
+  "log_auto": "⬇ 自动",
+  "log_clear": "✕ 清空",
+  "log_filter_placeholder": "筛选…",
+  "skip_cancel": "取消",
+  "skip_confirm": "跳过"
 }