cleanup odd behavior on refresh after exiting certain dialogs. remove unintended bypass for files needing to be verified before printing

fix: object skip when selected on print start

.gitignore

@@ -15,3 +15,5 @@ config/config.ini
 config/*.ini
 !config/config.ini.example
 data/
+
+!data/orca_filaments.json

CHANGELOG.de.md

@@ -1,5 +1,329 @@
 # Changelog
 
+## [0.9.25] – 2026-06-17
+
+### Behoben
+- **Zufällige Abstürze / Container-Restarts — Segfault in `libcrypto.so.3`
+  (Issue #53).** Der MQTT-über-TLS-Client teilte einen einzelnen SSL-Socket
+  zwischen dem Reader-Thread (`recv`) und den Sender-Threads (`sendall`), ohne sie
+  zu serialisieren. CPythons `ssl`-Modul erlaubt kein gleichzeitiges Lesen und
+  Schreiben auf demselben Socket — die Überlappung korrumpierte den internen
+  OpenSSL-Zustand und löste eine Heap-Corruption + Segfault aus, die auf manchen
+  Hosts timing-bedingt zuverlässig auftrat. Sämtliche Socket-Zugriffe (recv /
+  sendall / close / reconnect) werden nun unter einem einzigen Lock serialisiert;
+  der Reader prüft die Bereitschaft mit `select()` außerhalb des Locks, damit die
+  Sender nie ausgehungert werden. Reconnect und Disconnect tauschen den Socket
+  jetzt atomar. Dank an @BasK für den detaillierten Fault-Handler-Trace.
+- **File-Browser akzeptierte Nicht-GCode-Uploads (Issue #59).** Drag & Drop umging
+  den `accept`-Filter des Dateidialogs, sodass z.B. ein JPG hochgeladen werden
+  konnte. Uploads werden jetzt client- und serverseitig validiert; nur `.gcode`,
+  `.gcode.3mf`, `.3mf` und `.bgcode` werden akzeptiert. Dank an @gangoke.
+
+## [0.9.24] – 2026-06-16
+
+### Neu
+- **Objekte überspringen in jedem Druck-Flow (Issue #57).** Der „Objekte
+  überspringen"-Bereich im Slot-Mapper erschien bisher nur beim Druck aus dem
+  Browser-Tab. Er ist jetzt in allen Flows verfügbar (inkl. Upload / Print-Leiste),
+  standardmäßig eingeklappt hinter einem `✂ Objekte überspringen (N)`-Header, damit
+  der Dialog kompakt bleibt — Klick klappt Vorschau + Checkliste auf.
+- **Slot-Mapper zeigt konkreten Profilnamen (Issue #57).** Jeder Slot zeigt nun das
+  zugeordnete Filament-Profil (z.B. „PolyTerra PLA — Polymaker") in den Dropdown-
+  Optionen und als Hover-Tooltip am Slot-Marker, statt nur des generischen Typs.
+  Fällt auf den generischen Typ zurück, wenn kein Profil gemappt ist.
+
+## [0.9.23] – 2026-06-16
+
+### Neu
+- **Druckdialog nach Upload automatisch öffnen.** Eine neue Einstellung
+  `print_start_dialog` (Einstellungen → Drucker → „Druckstart-Verhalten") steuert,
+  was nach einem Upload bei leerlaufendem Drucker passiert: „Print-Dialog" öffnet
+  den Slot-Zuordnungs-Dialog automatisch, „Print-Leiste" behält das bisherige
+  Banner. Basiert auf PR #56 von @gangoke.
+- **Auto-Leveling-Schalter pro Druck.** Der Druckdialog hat jetzt eine eigene
+  Auto-Leveling-Checkbox, die den globalen Standard für einen einzelnen Druck
+  überschreibt.
+
+### Behoben
+- **Objekt-Skip wurde beim Druckstart still ignoriert (PR #56, @gangoke).** Der
+  Skip-Befehl wurde gesendet, *bevor* der Drucker im `printing`-Status war, und
+  daher verworfen. Der Skip wird nun in einer Retry-Schleife erneut angewendet,
+  sobald der Druck bestätigt läuft — mit einer Pending-Sperre, damit die UI den
+  Skip-Status nicht vorzeitig zurücksetzt.
+- **Upload während eines laufenden Drucks überschrieb die Vorschau des laufenden
+  Auftrags.** Ein neuer Upload während des Drucks ersetzt nicht mehr Thumbnail /
+  file_ready des Auftrags auf dem Druckbett.
+
+## [0.9.22] – 2026-06-16
+
+### Neu
+- **Neu strukturiertes Einstellungs-Panel.** Das Einstellungs-Modal wurde durch
+  ein dauerhaftes Master-Detail-Panel mit fünf Kategorien ersetzt: Verbindung,
+  Drucker, Darstellung, Filament und System. Das Poll-Intervall ist nun live
+  einstellbar.
+- **Vendor-Sichtbarkeitsfilter (Issue #41).** Eine neue Checkliste in den
+  Filament-Einstellungen beschränkt das Slot-Profil-Dropdown auf bestimmte
+  Hersteller. „Generic" und eigene importierte Profile sind immer sichtbar.
+- **Idle-Datei-Aktionen in der Fortschritts-Karte (Issue #55).** Nach einem
+  Upload bei leerlaufendem Drucker erscheinen drei Schnellaktionen direkt in der
+  Fortschritts-Karte: ▶ Drucken, ⚙ Slots zuordnen und ✕ Leeren.
+
+### Behoben
+- **Mobileraker-Kompatibilität (Issue #48).** Absturz in `ConfigExtruder.fromJson`
+  (leeres `configfile.config`), Hänger beim Refresh (Metadata-Endlosschleife) und
+  fehlende ETA/Restzeit behoben.
+
+## [0.9.21] – 2026-06-14
+
+### Behoben
+- **Kamera-Stream auf Android (Chrome / Firefox) nicht sichtbar.** Android-Browser
+  unterstützen `multipart/x-mixed-replace` (MJPEG) nicht. Die UI erkennt Android
+  jetzt automatisch und fällt auf Snapshot-Polling mit 5 fps zurück
+  (`/api/camera/snapshot` alle 200 ms) — keine Server-Änderung nötig.
+
+### Geändert
+- Docker-Image auf **Debian 12 (Bookworm)** gepinnt (`python:3.11-slim-bookworm`),
+  um Kompatibilitätsprobleme mit glibc 2.41 zu vermeiden, die das aktuell von
+  `python:3.11-slim` gezogene Debian 13 Basis-Image mitbringt.
+- MQTT- und HTTP-Verbindungen erzwingen jetzt **IPv4** (`AF_INET`), um
+  Verbindungsfehler auf Hosts zu verhindern, bei denen der Drucker nur über IPv4
+  erreichbar ist, das OS aber IPv6 bevorzugt.
+- Extruder-Stub in der Moonraker-`configfile`-Antwort enthält jetzt `sensor_type`
+  und `filament_diameter` — behebt einen Mobileraker-Absturz
+  (`Null is not a subtype of Object`, Issue #48).
+
+## [0.9.20] – 2026-06-08
+
+### Neu
+- **Französische Sprachunterstützung (PR #45 von @Nathacks)**
+- **Z-Höhe in der Print-UI (PR #49 von @Nathacks).** Zeigt die aktuelle
+  Z-Position in mm unterhalb des Layer-Zählers.
+
+### Behoben
+- **Kamera-Autostart ignorierte das "Kamera bei Druckstart einschalten"-
+  Setting nach einem Bridge-Restart (Issue #50).** Das Setting wurde in
+  der Prozessumgebung gecacht — nach dem Speichern in der UI überlebte
+  der alte Wert den Restart und der neue Wert aus `config.ini` wurde
+  nicht gelesen.
+- **Kamera startete nach manuellem Stopp während eines Drucks automatisch
+  neu (Issue #50).** Ein neues `_camera_user_stopped`-Flag unterdrückt
+  den Autostart für die aktuelle Drucksitzung. Es wird beim Druckende
+  zurückgesetzt.
+- **Falscher "Stream nicht verfügbar"-Fehler-Toast beim manuellen
+  Kamera-Stopp.** Der Bild-Fehler-Handler war noch registriert als
+  `img.src` geleert wurde.
+- **JS-Fehler (`ReferenceError: br is not defined`) beim Licht-Toggle.**
+  Variable wurde aus dem falschen Scope referenziert.
+- Webcam-URLs sind jetzt absolut, damit Mobileraker/Obico-Clients sie
+  erreichen können.
+
+## [0.9.19.1] – 2026-06-04
+
+### Behoben
+- Standalone-Binaries (Linux/Windows) zeigten `vunknown` als Version.
+  Die `VERSION`-Datei ist jetzt ins PyInstaller-Onefile eingebettet.
+- Bei fehlenden TLS-Zertifikaten (`anycubic_slicer.crt`/`.key`) gab
+  es nur den rohen Fehler `[Errno 2] No such file or directory`. Die
+  Bridge meldet jetzt klar, wo die Dateien hingelegt werden müssen
+  und dass `anycubic-certs.zip` aus dem Gitea-Release stammt.
+
+### Geändert
+- Filament-Profil-Liste neu kuratiert: 209 statt 399 Einträge.
+  Profile die nur für drucker-spezifische Vendor-Bundles existieren
+  (z.B. Eryone Thinker X400, Artillery M1 Pro, WonderMaker ZR,
+  Tiertime, Cubicon, CoLiDo, Afinia, Snapmaker) sind rausgeflogen
+  — OrcaSlicer hätte sie im Standard-Kobra-X-Setup beim Sync
+  ohnehin nicht gefunden, weil die jeweiligen Vendor-Bundles nur
+  bei aktivem Drucker-Vendor geladen werden. Für solche Filamente
+  bleibt der Custom-Profile-Import (Issue #41) der Weg.
+
+## [0.9.19] – 2026-06-02
+
+### Neu
+- **🎯 Filament-Sync mit OrcaSlicer matched jetzt das richtige Preset**
+  statt immer auf „Generic PLA" zu landen. Voraussetzung: ein
+  OrcaSlicer-Build mit dem
+  [PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)
+  Empfangs-Patch (im OrcaSlicer-KX-Build dabei). Die Bridge sendet pro
+  AMS-Slot jetzt `name` + `vendor_name` im Lane-Pfad UND
+  `gate_filament_name` im Happy-Hare-MMU-Pfad (OrcaSlicer wechselt bei
+  AMS-Setups automatisch auf den HH-Pfad).
+- **Eigene OrcaSlicer-Profile in die Bridge importieren (Issue #41).**
+  Settings-Tab → „OrcaSlicer-Profile" oder direkt im Slot-Edit-Dialog
+  („★ Eigene Profile importieren…") lädst du deine `.json`-Files aus
+  `~/.config/OrcaSlicer/user/<id>/filament/` hoch — einzeln oder als
+  ZIP. Erscheint dann im Slot-Dropdown unter „★ Eigene Profile" und
+  wird beim Sync an Orca als User-Match weitergegeben. Funktioniert
+  über HTTP, also auch wenn die Bridge im Docker auf Raspi/NAS läuft
+  und OrcaSlicer auf dem Desktop. Auch reine Override-Profile mit nur
+  `inherits: "Generic PLA @System"` + ein paar Tweaks werden korrekt
+  erkannt — die Bridge resolved die vererbten Felder aus dem
+  System-Parent.
+
+### Fixes
+- **AMS-Sync landete hartnäckig auf „Generic PLA":** das Orca-
+  Datenmodell hat 68 duplikate `filament_id`-Werte (`OGFL99` allein
+  136 mal), und die Bridge wählte oft eine ID die für den Kobra X
+  nicht `is_compatible` war (z.B. `GFL92` aus dem Kobra-2-Profil →
+  Orca verwarf es). Generator priorisiert jetzt Kobra-X-Varianten und
+  filtert Phantom-Profile (Cross-Vendor-Overrides) raus —
+  `orca_filaments.json` von 1035 → 400 saubere Profile.
+- **Slot ohne expliziten Override sendet jetzt `Generic <Typ>`** statt
+  einer impliziten Vendor-Annahme. Library-Generic-Profile haben
+  `compatible_printers: []` (= alle Drucker), sind also immer sichtbar
+  und matchen verlässlich.
+- **Slot-Karte zeigt den Hersteller direkt nach dem Speichern** —
+  ohne Browser-Reload. `poll()` war async, das Re-Render kam erst
+  beim nächsten Tick.
+- **ACE-Trockner-Toggle warf 502-Fehler obwohl der Trockner ein-/aus-
+  ging (PR #42 von @gangoke):** `setDry` jetzt fire-and-forget wie
+  `setAutoFeed`. Der Drucker antwortet auf diesem Push-Topic mit
+  `code: 0` statt `code: 200`, das hat die Bridge fälschlich als
+  Fehler interpretiert.
+
+### Datenmodell / API
+- `orca_filaments.json` regeneriert: nur echte Vendor-Profile und
+  OrcaFilamentLibrary-Profile bleiben drin. Bambu/Polymaker/SUNLU-
+  Library-Profile dabei, Qidi-Cross-Bundles raus.
+- Neue Endpoints: `POST /kx/filament/profiles/user` (ZIP/JSON-Upload),
+  `GET /kx/filament/profiles/user` (Liste der User-Imports),
+  `DELETE /kx/filament/profiles/user[?vendor=…&name=…]`. Persistenz
+  in `<KX_DATA_DIR>/orca_filaments.user.json` (Volume — überlebt
+  Image-Updates).
+
+### Build
+- Neues Modul `bridge/orca_filaments.py` (gemeinsame Parser-Helfer
+  für Generator und Import-Endpoint).
+- Dockerfile + release.sh um `orca_filaments.py` erweitert.
+
+## [0.9.18] – 2026-05-31
+
+### Neu
+- **🎉 Filament-Material und -Farbe pro AMS-Slot aus der Bridge an den
+  Drucker senden:** Im Slot-Edit-Dialog gewählte Werte gehen jetzt
+  tatsächlich an den Drucker und werden persistent übernommen — am
+  Drucker-Display siehst du sofort dieselbe Belegung wie in der Bridge-UI.
+  In 0.9.17 wurde der Befehl über das falsche MQTT-Topic
+  (`slicer/printer/…`) gesendet, der Drucker hat ihn stillschweigend
+  ignoriert. Jetzt geht er über `web/printer/…` wie der Anycubic
+  Slicer Next es macht (verifiziert via Live-MQTT-Sniff +
+  Workbench-Vue-Source). **Achtung:** der Drucker muss im Idle-Zustand
+  sein, und leere Slots lassen sich nicht beschriften.
+- **Mehrsprachiges UI – spanische Übersetzung von Muttersprachler
+  überarbeitet (PR #40 von @pezfisk):** fehlende Akzente
+  (impresión, cámara, después, animación, …), Begriffe vereinheitlicht
+  (Pause → Pausa, Start → Iniciar, Layer → Capa). Plus neues
+  `README.es.md` und Cross-Links in den drei READMEs.
+- **Z-Höhen-Anzeige in Obico** funktioniert jetzt. Der Drucker liefert
+  keine echte Z-Position via MQTT (per Live-Sniff bestätigt), die Bridge
+  schätzt sie aus `curr_layer × layer_height + first_layer_height`.
+  Layer-Heights kommen aus dem GCode-Header beim Upload, persistiert
+  im GCode-Store; Fallback aus dem OrcaSlicer-Default-Filename
+  (`…_0.2_…gcode`). `/server/files/metadata` liefert zusätzlich
+  `object_height` (Gesamt-Z), damit Obicos `mmProgress`-Widget
+  `aktuelles Z / Gesamt-Z` anzeigt.
+- **Slot-Karte zeigt den OrcaSlicer-Profil-Vendor** unter dem Material
+  (z.B. „PLA / Polymaker"), mit Profil-Namen + interner ID als
+  Tooltip. So ist auf einen Blick erkennbar welcher Slot-Override
+  aktiv ist.
+
+### Fixes
+- **Slot-Profil-Auswahl im AMS-Dialog (Issue #39 von @harrygeier):**
+  drei separate Bugs in 0.9.17 sorgten dafür dass die gewählte Marke
+  nach dem Speichern verschwand und beim erneuten Öffnen ein falsches
+  Material angezeigt wurde.
+  - `multiColorBox/setInfo` über das falsche MQTT-Topic — siehe oben.
+  - Speichern lief in zwei parallelen Requests (Profil-Override +
+    Material/Farbe) → Race-Bedingung. Läuft jetzt sequenziell und
+    reloaded den lokalen State bevor der Dialog geschlossen wird.
+  - OrcaSlicer-Filament-IDs sind nicht eindeutig — `orca_filaments.json`
+    hat 68 duplikate IDs, `OGFL99` allein ist 136 Vendor-Profilen
+    zugeordnet (Erkenntnis von @gangoke). Der primäre Selector ist
+    jetzt `(vendor, name)` — über alle 1002 Profile eindeutig.
+- **MQTT-Reconnect (Issue #33 von @icebear):** wurde der Drucker über
+  Nacht ausgeschaltet, schlug die Bridge nach 5 Reconnect-Versuchen
+  (~60 s gesamt) endgültig fehl — Filament-Sync ging morgens noch
+  (weil das HTTP ist), aber Print-Start scheiterte mit
+  „connection refused", User musste die Bridge selbst neu starten.
+  Reader-Thread reconnectet jetzt **endlos** (Backoff cappt bei 60 s)
+  bis der Drucker wieder antwortet, mit DEBUG-Logging nach den ersten
+  5 Versuchen damit das Log nicht über Nacht zugemüllt wird.
+- **„Unknown child pid"-Warnungen im Log:** beim Killen der Kamera-
+  `ffmpeg`-Prozesse fehlte das `wait()` — Children blieben als
+  Zombies und asyncio meldete sie alle ~20 s. Gefixt im CameraCache
+  + `/api/camera/stream`.
+
+### UI-Aufräumen
+- **Pause-Button als Toggle:** druckt der Drucker → `⏸ Pause`, ist
+  pausiert → `▶ Weiter`. Der separate „Weiter"-Button entfällt.
+- **Pause + Stopp komplett ausgeblendet wenn Drucker idle** — bei
+  Standby waren beide Buttons vorher dauerhaft sichtbar, was beim
+  Idle-Drucker verwirrend wirkte.
+
+### Build
+- **GCode-Store-Migration:** neue Spalten `layer_height` +
+  `first_layer_height` in `gcode_files` (automatisch beim ersten
+  Start von 0.9.18 angelegt).
+
+## [0.9.17] – 2026-05-30
+
+### Neu
+- **🧪 Obico-Anbindung (experimentell):** Die Bridge spielt jetzt einen
+  Moonraker, der vom [moonraker-obico](https://github.com/TheSpaghettiDetective/moonraker-obico)
+  Plugin akzeptiert wird. Damit funktionieren Time-Lapse, Layer-aligned
+  First-Layer-Scan und WebRTC-Live-Stream gegen einen (selbst gehosteten oder
+  Cloud-) Obico-Server. **Hinweis:** Das KI-Modell zur Spaghetti-Erkennung
+  ist auf seitliche Kamera-Winkel (Ender/Voron) trainiert — wie zuverlässig
+  es beim Kobra X mit Top-Down-Kamera funktioniert, muss empirisch getestet
+  werden (bei uns ging es schon ganz gut). Stream, Time-Lapse und Telemetrie
+  laufen, die Failure-Erkennung ist deshalb noch als experimentell markiert.
+- **Mehrsprachiges UI (PR #37 von @gangoke):** Inline-Translations sind raus,
+  stattdessen wechselbares Sprach-Dropdown mit Globe-Icon. Auto-Auswahl nach
+  Browser-Locale, manuelle Wahl wird im LocalStorage gemerkt. Sprachen: 🇩🇪 🇬🇧
+  🇪🇸 🇨🇳 (ES + ZH-CN sind KI-übersetzt und noch nicht von Muttersprachlern
+  geprüft).
+- **OrcaSlicer-Filament-Profil pro AMS-Slot:** Im Slot-Bearbeiten-Dialog kannst
+  du jetzt ein konkretes OrcaSlicer-Profil (z.B. „PolyTerra PLA — Polymaker")
+  pro Slot wählen — die Bridge sendet diese Information beim AMS-Sync mit,
+  statt nur „Generic PLA". Die Profil-Liste wird aus dem OrcaSlicer-Source
+  generiert (~1000 Profile, 43 Hersteller). Damit OrcaSlicer den Hint
+  vollständig respektiert, wird ein passender Patch im OrcaSlicer-KX-Build
+  folgen.
+- **H.264-Direkt-Stream:** Neuer Endpunkt `/api/camera/h264` liefert den
+  Drucker-Kamera-Stream ohne Re-Encoding als MPEG-TS — Latenz drastisch
+  reduziert, Bridge-CPU bei Obico-Stream von ~13 % auf ~3 %.
+
+### Fixes
+- **Temperatur-Setzen über Bridge-UI / Obico löste Drucker-Systemfehler aus:**
+  Per Live-MQTT-Sniff vom Anycubic Slicer Next korrigiert — der Befehl
+  `tempature/set` braucht ein `type`-Feld (0=Nozzle, 1=Bett, 2=beide) und
+  muss über das `web/printer/…`-Topic, nicht `slicer/printer/…`. Nozzle/Bett
+  über die Bridge heizen jetzt sauber.
+- **Große GCode-Uploads (>50 MB) brachen mit Timeout ab:** Der
+  Connect-Timeout vom Socket lief auch während des `sendall()` — bei ~200 MB
+  über LAN brauchte das Schieben mehr als die 30 s und wurde fälschlich als
+  Connect-Timeout abgebrochen. Jetzt sind Connect-, Send- und Read-Phase
+  separat getimeoutet.
+- **Kamera-Snapshot war langsam und konnte sich mit dem Live-Stream blockieren:**
+  Die Bridge hält nun einen zentralen Kamera-Cache (ein einziger ffmpeg-Prozess
+  zieht vom Drucker, alle Konsumenten teilen sich den Stream). Snapshots
+  kommen in ~1.3 ms aus dem RAM statt nach 1-2 s per neuer ffmpeg-Instanz.
+  Behebt außerdem das Single-Client-Limit am Drucker (HTTP 429 bei parallelen
+  Zugriffen).
+- **Sprachwechsel aktualisierte den GCode-Browser nicht:** Die in die
+  File-Karten eingebackenen Texte („Drucken", „Schätzung", „Download") blieben
+  in der alten Sprache. Beim Sprachwechsel werden die Karten jetzt neu
+  gerendert.
+- **GCode Web-Upload + Download + Verify-Dialog (PR #32 von @gangoke):**
+  Dateien können direkt im Browser hoch/runtergeladen werden, mit
+  Warn-Dialog wenn ein nicht durch OrcaSlicer hochgeladener GCode gestartet
+  wird.
+
+### CI/Build
+- Multi-Arch Docker-Image (amd64 + arm64) per Gitea-Actions automatisiert.
+- Release-Build über lokalen CodeBuilder für alle drei Targets
+  (linux-amd64, linux-arm64, windows.exe).
+
 ## [0.9.16] – 2026-05-22
 
 ### Neu

CHANGELOG.md

@@ -1,5 +1,346 @@
 # Changelog
 
+## [0.9.25] – 2026-06-17
+
+### Fixed
+- **Random crashes / container restarts — segfault in `libcrypto.so.3` (issue #53).**
+  The MQTT-over-TLS client shared a single SSL socket between the reader thread
+  (`recv`) and the sender threads (`sendall`) without serializing them. CPython's
+  `ssl` module does not allow concurrent read and write on the same socket — the
+  overlap corrupted OpenSSL's internal state, causing a heap corruption and a
+  segfault that manifested reliably on some hosts (timing-dependent). All socket
+  access (recv / sendall / close / reconnect) is now serialized under a single
+  lock; the reader probes readiness with `select()` outside the lock so senders
+  are never starved. Reconnect and disconnect now swap the socket atomically.
+  Thanks to @BasK for the detailed fault-handler trace that pinpointed this.
+- **File browser accepted non-GCode uploads (issue #59).** Drag & drop bypassed
+  the file picker's `accept` filter, so e.g. a JPG could be uploaded. Uploads are
+  now validated both client- and server-side; only `.gcode`, `.gcode.3mf`, `.3mf`
+  and `.bgcode` are accepted. Thanks @gangoke.
+
+## [0.9.24] – 2026-06-16
+
+### New
+- **Skip Objects available in every print flow (issue #57).** The "Skip objects"
+  panel in the Slot Mapper used to appear only when printing from the Browser tab.
+  It now shows in all flows (upload / print bar included), collapsed by default
+  behind a `✂ Skip objects (N)` header to keep the dialog compact, expanding on
+  click with the object preview and checklist.
+- **Slot Mapper shows the specific profile name (issue #57).** Each slot now
+  displays its mapped filament profile (e.g. "PolyTerra PLA — Polymaker") in the
+  dropdown options and as a hover tooltip on the slot marker, instead of just the
+  generic type. Falls back to the generic type when no profile is mapped.
+
+## [0.9.23] – 2026-06-16
+
+### New
+- **Auto-open print dialog after upload.** A new `print_start_dialog` setting
+  (Settings → Printer → "Start Print Behavior") controls what happens after a
+  file is uploaded while the printer is idle: `Print Dialog` opens the
+  slot-assignment dialog automatically, `Print Bar` keeps the previous banner
+  behaviour. Based on PR #56 by @gangoke.
+- **Per-print auto-leveling toggle.** The print dialog now has its own
+  auto-leveling checkbox that overrides the global default for a single print.
+
+### Fixed
+- **Object skip was silently ignored at print start (PR #56, @gangoke).** The
+  skip command was sent *before* the printer entered the `printing` state, so it
+  was dropped. The skip is now re-applied in a retry loop once the print is
+  confirmed running, with a pending-lock so the UI doesn't reset the skip state
+  prematurely.
+- **Upload during an active print overwrote the running job's preview.**
+  Uploading a new file while printing no longer replaces the thumbnail /
+  file_ready of the job currently on the bed.
+
+## [0.9.22] – 2026-06-16
+
+### New
+- **Restructured Settings panel.** The settings modal has been replaced by a
+  persistent Master-Detail panel with five categories: Connection, Printer,
+  Appearance, Filament, and System. Poll interval is now adjustable live.
+- **Vendor visibility filter (issue #41).** A new checklist in the Filament
+  settings lets you restrict the slot profile dropdown to specific manufacturers.
+  "Generic" and your own imported profiles are always visible. The list updates
+  automatically after a profile import.
+- **Idle file actions in the progress card (issue #55).** After uploading a file
+  while the printer is idle, three quick-action buttons appear directly in the
+  progress card: ▶ Print, ⚙ Map Slots, and ✕ Clear — matching the file browser
+  workflow without navigating away.
+
+### Fixed
+- **Mobileraker: app crashed with `Null is not a subtype of Object` in
+  `ConfigExtruder.fromJson` (issue #48).** `configfile.config` was returned as
+  an empty object `{}`. Mobileraker parses both `configfile.settings` and
+  `configfile.config` through the same strict Dart parser — both are now
+  populated with the same extruder/bed/stepper stub.
+- **Mobileraker: app hung indefinitely on refresh (issue #48).** The WebSocket
+  `server.files.metadata` handler called a non-existent store method
+  (`get_file_by_filename`), always returning empty metadata. Mobileraker retried
+  this thousands of times per second. Both the HTTP and WS paths now share a
+  single `_build_file_metadata()` method.
+- **Mobileraker: ETA / remaining time not shown (issue #48).** A side effect of
+  the metadata loop fix — once `currentFile` resolves, Mobileraker can calculate
+  ETA from `estimated_time`.
+- **Mobileraker: `notify_status_update` triggered repeated `ConfigFile.parse`
+  (issue #48).** Static objects (`configfile`, `webhooks`, `heaters`, `history`)
+  were included in every live status push. They are now filtered out; only live
+  telemetry is broadcast.
+- `motion_report` (`live_position`, `live_velocity`) added to printer objects
+  for Mobileraker motion display.
+- Saving filament slot profiles no longer silently drops the `visible_vendors`
+  setting from `config.ini`.
+
+## [0.9.21] – 2026-06-14
+
+### Fixed
+- **Camera stream not visible on Android (Chrome / Firefox).** Android
+  browsers do not support `multipart/x-mixed-replace` (MJPEG). The UI
+  now detects Android and falls back to snapshot-polling at 5 fps
+  (`/api/camera/snapshot` every 200 ms) — no server-side change needed.
+
+### Changed
+- Docker image now pinned to **Debian 12 (Bookworm)** (`python:3.11-slim-bookworm`)
+  to avoid glibc 2.41 compatibility issues introduced by the Debian 13
+  base image that `python:3.11-slim` recently started pulling.
+- MQTT and HTTP connections now **force IPv4** (`AF_INET`) to prevent
+  connection failures on hosts where the printer is only reachable via
+  IPv4 but the OS prefers IPv6.
+- Extruder stub in the Moonraker `configfile` response now includes
+  `sensor_type` and `filament_diameter` — fixes a Mobileraker crash
+  (`Null is not a subtype of Object`, issue #48).
+
+## [0.9.20] – 2026-06-08
+
+### New
+- **French language support (PR #45 by @Nathacks)**
+- **Z height display in the print UI (PR #49 by @Nathacks).** Shows
+  current Z position in mm below the layer counter.
+
+### Fixed
+- **Camera auto-start ignored "Enable camera on print start" setting
+  after a bridge restart (issue #50).** The setting was cached in the
+  process environment — after saving it in the UI, the old value
+  survived the restart and the new value from `config.ini` was never
+  read.
+- **Camera restarted automatically after manual stop during a print
+  (issue #50).** A new `_camera_user_stopped` flag suppresses
+  auto-restart for the current print session. It resets when the
+  print ends.
+- **Spurious "stream unavailable" error toast when stopping the camera
+  manually.** The image error handler was still registered when
+  `img.src` was cleared.
+- **JS error (`ReferenceError: br is not defined`) when toggling the
+  light.** Variable was referenced from the wrong scope.
+- Webcam URLs are now absolute so that Mobileraker/Obico clients can
+  reach them.
+
+## [0.9.19.1] – 2026-06-04
+
+### Fixed
+- Standalone binaries (Linux/Windows) reported `vunknown` as their
+  version. The `VERSION` file is now embedded into the PyInstaller
+  onefile bundle.
+- When the TLS certificates (`anycubic_slicer.crt`/`.key`) were
+  missing, the bridge only logged the raw `[Errno 2] No such file
+  or directory`. It now states clearly where the files need to be
+  placed and that `anycubic-certs.zip` from the Gitea release is the
+  source.
+
+### Changed
+- Filament profile list re-curated: 209 entries instead of 399.
+  Profiles that only exist inside printer-specific vendor bundles
+  (e.g. Eryone Thinker X400, Artillery M1 Pro, WonderMaker ZR,
+  Tiertime, Cubicon, CoLiDo, Afinia, Snapmaker) were dropped —
+  OrcaSlicer wouldn't have found them in a default Kobra X setup
+  anyway, because the matching vendor bundle is only loaded when
+  the corresponding printer vendor is active. For those filaments
+  the custom profile import (issue #41) remains the way.
+
+## [0.9.19] – 2026-06-02
+
+### New
+- **🎯 Filament sync with OrcaSlicer now picks the right preset**
+  instead of always falling back to "Generic PLA". Requires an
+  OrcaSlicer build with the
+  [PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)
+  receive-side patch (included in the OrcaSlicer-KX build). The bridge
+  sends `name` + `vendor_name` per AMS slot on the lane path AND
+  `gate_filament_name` per gate on the Happy-Hare MMU path (OrcaSlicer
+  switches to the HH path automatically for AMS setups).
+- **Import your own OrcaSlicer profiles into the bridge (issue #41).**
+  Settings → "OrcaSlicer Profiles" or directly in the slot-edit dialog
+  ("★ Import own profiles…") lets you upload `.json` files from
+  `~/.config/OrcaSlicer/user/<id>/filament/` — single files or as a
+  ZIP. They show up in the slot dropdown under "★ Own profiles" and
+  are passed through to Orca on sync as user matches. Works over HTTP
+  so the bridge can run in Docker on a Raspi/NAS while OrcaSlicer
+  lives on a desktop. Override-only profiles with just
+  `inherits: "Generic PLA @System"` + a few tweaks are detected
+  correctly — the bridge resolves the inherited fields from the
+  system parent.
+
+### Fixes
+- **AMS sync stuck on "Generic PLA":** the Orca data model has 68
+  duplicate `filament_id` values (`OGFL99` alone shared by 136
+  profiles), and the bridge often picked an ID that was not
+  `is_compatible` with the Kobra X (e.g. `GFL92` from the Kobra-2
+  profile → Orca rejected it). The generator now prioritises Kobra-X
+  variants and filters out phantom profiles (cross-vendor overrides) —
+  `orca_filaments.json` dropped from 1035 to 400 clean profiles.
+- **Slot without an explicit override now sends `Generic <type>`**
+  instead of an implicit vendor guess. Library generic profiles have
+  `compatible_printers: []` (= all printers), so they are always
+  visible and match reliably.
+- **Slot card shows the vendor right after save** without a browser
+  reload. `poll()` was async, the re-render only happened on the next
+  tick.
+- **ACE dryer toggle threw a 502 even though the dryer worked
+  (PR #42 by @gangoke):** `setDry` is now fire-and-forget like
+  `setAutoFeed`. The printer answers on that push topic with
+  `code: 0` instead of `code: 200`, which the bridge wrongly treated
+  as an error.
+
+### Data model / API
+- `orca_filaments.json` regenerated: only real vendor profiles and
+  OrcaFilamentLibrary profiles. Bambu/Polymaker/SUNLU library profiles
+  in, Qidi cross-bundles out.
+- New endpoints: `POST /kx/filament/profiles/user` (ZIP/JSON upload),
+  `GET /kx/filament/profiles/user` (list user imports),
+  `DELETE /kx/filament/profiles/user[?vendor=…&name=…]`. Persisted in
+  `<KX_DATA_DIR>/orca_filaments.user.json` (volume — survives image
+  updates).
+
+### Build
+- New module `bridge/orca_filaments.py` (shared parser helpers used by
+  the generator and the import endpoint).
+- Dockerfile + release.sh updated to include `orca_filaments.py`.
+
+## [0.9.18] – 2026-05-31
+
+### New
+- **🎉 Push filament material and colour from the bridge to the
+  printer:** The values you pick in the slot-edit dialog now actually
+  reach the printer and stick — the printer display shows the same
+  slot setup as the bridge UI right away. In 0.9.17 the command was
+  sent over the wrong MQTT topic (`slicer/printer/…`) and the printer
+  silently dropped it. It now goes via `web/printer/…` like the
+  Anycubic Slicer Next does (verified by live MQTT sniff +
+  Workbench-Vue source). **Note:** the printer must be idle, and
+  empty slots can not be labelled.
+- **Spanish translation reviewed by a native speaker (PR #40 by
+  @pezfisk):** missing accents (impresión, cámara, después,
+  animación, …) and term consistency (Pause → Pausa, Start →
+  Iniciar, Layer → Capa). New `README.es.md` and cross-links between
+  the three READMEs.
+- **Z-height now shows up in Obico.** The printer does not report a
+  real Z position over MQTT (live-sniff confirmed), so the bridge
+  estimates it from `current_layer × layer_height + first_layer_height`.
+  Layer heights are parsed from the gcode header at upload time and
+  persisted in the gcode store; fallback for prints started directly
+  from the slicer is the OrcaSlicer default filename pattern
+  (`…_0.2_…gcode`). `/server/files/metadata` also serves
+  `object_height` (total Z) so Obicos `mmProgress` widget can render
+  `current Z / total Z`.
+- **Slot card shows the OrcaSlicer profile vendor** under the
+  material (e.g. `PLA / Polymaker`), with the profile name + internal
+  ID as tooltip. Lets you see at a glance which slot override is
+  active.
+
+### Fixes
+- **Slot profile picker in the AMS dialog (issue #39 by
+  @harrygeier):** three separate bugs in 0.9.17 caused the chosen
+  brand to disappear after save and a different material to show up
+  on re-open.
+  - `multiColorBox/setInfo` was sent on the wrong MQTT topic — see
+    above.
+  - Save fired two parallel requests (profile override + material/
+    colour) → race. Now sequential, and the local state is reloaded
+    before the dialog closes.
+  - OrcaSlicer filament IDs are not unique — `orca_filaments.json`
+    has 68 duplicate IDs, `OGFL99` alone is shared by 136 vendor
+    profiles (caught by @gangoke). The primary selector is now
+    `(vendor, name)` — unique across all 1002 profiles.
+- **MQTT reconnect (issue #33 by @icebear):** if the printer was
+  powered off overnight the bridge gave up after 5 reconnect attempts
+  (~60 s total) — filament sync still worked in the morning (its
+  HTTP), but starting a print failed with `connection refused` and
+  the user had to restart the bridge itself. The reader thread now
+  reconnects **forever** (backoff caps at 60 s) until the printer
+  responds again, with logs dropping to DEBUG after the first 5
+  attempts so an overnight outage does not spam the log.
+- **`Unknown child pid` warnings in the log:** the camera ffmpeg
+  helpers were killed without awaiting their `wait()` — children
+  lingered as zombies and asyncio reported them every ~20 s. Fixed
+  in CameraCache + `/api/camera/stream`.
+
+### UI polish
+- **Pause button is now a toggle:** while printing → `⏸ Pause`,
+  while paused → `▶ Resume`. The separate resume button is gone.
+- **Pause + stop hidden when the printer is idle** — both used to be
+  visible at all times, which was confusing on a standby printer.
+
+### Build
+- **gcode store migration:** new columns `layer_height` +
+  `first_layer_height` on `gcode_files` (added automatically on first
+  start of 0.9.18).
+
+## [0.9.17] – 2026-05-30
+
+### New
+- **🧪 Obico integration (experimental):** The bridge now exposes a
+  Moonraker-compatible surface that the
+  [moonraker-obico](https://github.com/TheSpaghettiDetective/moonraker-obico)
+  plugin accepts. Time-lapses, layer-aligned first-layer scan and WebRTC
+  live streaming work against a (self-hosted or cloud) Obico server.
+  **Note:** the spaghetti-detection ML model is trained on side-view
+  cameras (Ender/Voron); how well it works with the Kobra X's top-down
+  camera is still to be evaluated empirically (it already looked
+  promising in our tests). Stream, time-lapse and telemetry work — the
+  failure-detection side stays flagged as experimental for now.
+- **Multi-language UI (PR #37 by @gangoke):** Inline translations have
+  moved into JSON files; a globe-icon dropdown lets you switch language.
+  Browser locale is auto-detected; manual choice persists in
+  LocalStorage. Languages: 🇩🇪 🇬🇧 🇪🇸 🇨🇳 (ES + ZH-CN are AI-translated
+  and not verified by native speakers yet).
+- **OrcaSlicer filament profile per AMS slot:** The slot-edit dialog now
+  lets you pick a concrete OrcaSlicer profile (e.g. "PolyTerra PLA —
+  Polymaker") per slot; the bridge sends it along on AMS sync instead
+  of just "Generic PLA". Profile list is generated from the OrcaSlicer
+  source (~1000 profiles, 43 vendors). A matching patch in
+  OrcaSlicer-KX is on the way so OrcaSlicer fully honours the hint.
+- **H.264 direct stream:** New `/api/camera/h264` endpoint serves the
+  printer camera stream as MPEG-TS without re-encoding — dramatically
+  reduces latency, bridge CPU during Obico streaming drops from ~13 %
+  to ~3 %.
+
+### Fixes
+- **Setting temperature via bridge UI / Obico caused a printer system
+  error:** Fixed via live MQTT capture from Anycubic Slicer Next — the
+  `tempature/set` command needs a `type` field (0=nozzle, 1=bed,
+  2=both) and must go over the `web/printer/…` topic, not
+  `slicer/printer/…`. Nozzle/bed heating from the bridge now works.
+- **Large GCode uploads (>50 MB) timed out:** The socket connect timeout
+  was active during `sendall()` too — pushing ~200 MB over LAN took
+  more than 30 s and was falsely aborted. Connect / send / read phases
+  are now timed out separately.
+- **Camera snapshots were slow and could collide with the live stream:**
+  The bridge now keeps a central camera cache (one ffmpeg pulls from
+  the printer, all consumers share it). Snapshots return in ~1.3 ms
+  from RAM instead of 1–2 s per spawned ffmpeg. Also resolves the
+  single-client limit on the printer (HTTP 429 on parallel access).
+- **Language switch did not refresh the GCode browser:** Strings baked
+  into the file cards ("Print", "Estimate", "Download") stayed in the
+  previous language. Cards are now re-rendered on language switch.
+- **GCode web upload + download + verify dialog (PR #32 by @gangoke):**
+  Files can be uploaded / downloaded directly in the browser, with a
+  warning dialog when starting a GCode that was not uploaded via
+  OrcaSlicer.
+
+### CI/Build
+- Multi-arch Docker image (amd64 + arm64) automated via Gitea Actions.
+- Release builds for all three targets (linux-amd64, linux-arm64,
+  windows.exe) via the local CodeBuilder.
+
 ## [0.9.16] – 2026-05-22
 
 ### New

Dockerfile

@@ -1,15 +1,21 @@
-FROM python:3.11-slim
+FROM python:3.11-slim-bookworm
 
 WORKDIR /app
 
+RUN apt-get update && apt-get install -y --no-install-recommends ffmpeg && rm -rf /var/lib/apt/lists/*
+
 COPY requirements.txt .
 RUN pip install --no-cache-dir -r requirements.txt
 
 COPY kobrax_moonraker_bridge.py .
 COPY web/ ./web/
+# Statische Daten (orca_filaments.json etc.) liegen in /app/static/, NICHT in
+# /app/data/ — letzteres wird vom User als Volume gemountet (Runtime-State).
+COPY data/ ./static/
 COPY config_loader.py .
 COPY env_loader.py .
 COPY kobrax_client.py .
+COPY orca_filaments.py .
 COPY VERSION .
 COPY anycubic_slicer.crt .
 COPY anycubic_slicer.key .

README.de.md

@@ -8,7 +8,12 @@
 
 Eine Moonraker-kompatible Bridge, die direkt mit dem Drucker spricht.
 
-<sub>🇬🇧 <a href="README.md">English version</a></sub>
+<sub>🧪 Ein Community-Bericht auf Reddit deutet darauf hin, dass die Bridge auch
+mit dem **Kobra S1** und **Kobra S1 Max** funktioniert — die Protokolle wirken
+kompatibel, beides ist aber weder offiziell getestet noch unterstützt.
+Feedback willkommen.</sub>
+
+<sub>🇬🇧 <a href="README.md">English version</a>  ·  🇪🇸 <a href="README.es.md">Versión española</a></sub>
 
 <br>
 
@@ -32,12 +37,17 @@ Eine Moonraker-kompatible Bridge, die direkt mit dem Drucker spricht.
 |---|---|
 | 🖨️ | **Druckersteuerung** — Start, Pause, Resume, Abbruch, Temperaturen, Druckgeschwindigkeit |
 | 📊 | **Live-Status** — Temperatur, Fortschritt, Layer, Restzeit, Kamera-Stream |
-| 🎨 | **AMS / Multicolor** — Filament-Slots, Per-Kanal-Remapping, MMU-Emulation für OrcaSlicer Filament-Sync |
+| 🎨 | **AMS / Multicolor** — Slots mit **Profil-Picker pro Slot** (eigene Marke aus OrcaSlicer-Profilen pro Slot zuweisen); Bridge schreibt Material und Farbe ans Drucker-Display zurück |
+| 📦 | **Eigene OrcaSlicer-Profile importieren** — ZIP aus `~/.config/OrcaSlicer/user/<id>/filament/` in die Bridge ziehen; tauchen im Slot-Dropdown unter ★ Eigene Profile auf |
+| 📷 | **Obico-Integration (experimentell)** — Time-Lapse und WebRTC-Livestream gegen einen selbst gehosteten [Obico-Server](https://github.com/TheSpaghettiDetective/obico-server) via moonraker-obico |
+| 📐 | **H.264-Direkt-Stream + Z-Höhe** — sparsamer Kamera-Pfad für Obico, aktuelle Z aus der Layer-Höhe abgeleitet (Mm-Progress-Widget) |
 | 🗂️ | **GCode-Browser** — hochgeladene Dateien mit Thumbnail, Druckhistorie, Suche & Filter |
 | 🧩 | **Multi-Printer** — mehrere Drucker in **einer** Bridge-Instanz, Umschalten per Dropdown |
 | ➕ | **Drucker hinzufügen per Klick** — nur die IP eingeben, Zugangsdaten werden automatisch importiert |
+| 🔁 | **Robuster MQTT-Reconnect** — Bridge überlebt nächtlichen Drucker-Reboot ohne manuellen Neustart |
+| 🌐 | **Mehrsprachiges UI** — DE / EN / ES / 中文, Browser-Sprache automatisch erkannt |
 | 🔄 | **Self-Update** — neue Versionen direkt im Browser installieren |
-| 🌐 | **OrcaSlicer** — volles Moonraker-Protokoll (HTTP + WebSocket), DE/EN UI |
+| 🧠 | **OrcaSlicer** — volles Moonraker-Protokoll (HTTP + WebSocket); für korrekten Vendor-Match pro Slot den [OrcaSlicer-KX-Build](#-empfohlener-slicer) nutzen |
 
 ---
 
@@ -103,18 +113,28 @@ Drucker → Verbindungstyp **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ## 🎨 Empfohlener Slicer
 
-Für die beste Erfahrung mit der KX-Bridge bieten wir einen **gepatchten
-OrcaSlicer-Build**, der drei offene SoftFever/OrcaSlicer-PRs bündelt: das
-Anycubic-Kobra-X-Druckerprofil, einen Multicolor-G-Code-Fix und — am wichtigsten
-— einen Moonraker/Happy-Hare-Filament-Sync-Fix, der die AMS-Slot-Positionen auch
-bei einem leeren Slot in der Mitte korrekt beibehält.
+Für sauberen AMS-Filament-Sync gibt es einen **gepatchten OrcaSlicer-Build**:
 
 → **[OrcaSlicer-KX Releases](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases/latest)** (Linux AppImage + Windows ZIP)
 
-Standard-OrcaSlicer funktioniert auch; der gepatchte Build verbessert
-hauptsächlich das AMS-Handling. Es ist ein Build von
-[OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0); der Quellcode
-ist über die verlinkten PRs verfügbar.
+**Upstream-PRs im KX-Build:**
+
+- **[PR #13372](https://github.com/SoftFever/OrcaSlicer/pull/13372)** — Moonraker / Happy-Hare AMS-Sync-Fix (Slot-Positionen bleiben auch bei leerem Slot in der Mitte korrekt)
+- **[PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)** — Vendor- + Name-Matching für Moonraker (liest `name` + `vendor_name` pro Slot und matched gegen deine Filament-Presets), von [@LordGuenni](https://github.com/LordGuenni)
+- **[PR #13315](https://github.com/SoftFever/OrcaSlicer/pull/13315)** — Eindeutige `filament_id` für User-Presets (neu erstellte eigene Profile bekommen eine frische ID statt das `OGFL99` vom Generic-Parent zu erben), von [@mrnoisytiger](https://github.com/mrnoisytiger)
+
+**Plus vier KX-eigene Verbesserungen on top:**
+
+- Bridge-Filament-Hint (`tray_info_idx` + Vendor) respektieren
+- Vendor-Match auch wenn das gewählte Base-Preset **nicht is_compatible** mit dem aktiven Drucker ist (so matchen Profile aus anderen Drucker-Setups trotzdem über die Marke)
+- Vendor-Match wenn `tray_info_idx` gesetzt ist, das Preset aber inkompatibel
+- Zwei-Pass-Suche: erst kompatible Presets, dann alle sichtbaren
+
+**Warum das zusammen wichtig ist:** ohne #13719 landen die AMS-Slots in OrcaSlicer alle auf `Generic PLA` / `Generic PETG`, obwohl die Bridge die konkrete Marke schon mitsendet (`name + vendor_name + gate_filament_name`). Mit dem KX-Build matched OrcaSlicer deine echten User-Presets — auch die, die du via [Eigene OrcaSlicer-Profile importieren](#-features) in die Bridge gezogen hast.
+
+Stock-Upstream-OrcaSlicer funktioniert für Slicing und Drucken weiterhin — nur das Per-Slot-Vendor-Matching beim AMS-Sync fällt dann weg. Material und Farbe pro Slot kannst du auch ohne den KX-Build über die Bridge ans Drucker-Display schreiben (das läuft über MQTT, nicht über den Slicer).
+
+OrcaSlicer-KX ist ein Build von [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0); der Quellcode der Upstream-PRs ist auf GitHub, die KX-spezifischen Patches im OrcaSlicer-KX-Repo.
 
 ---
 
@@ -123,6 +143,13 @@ ist über die verlinkten PRs verfügbar.
 - **[Home-Assistant-Integration](https://github.com/gangoke/kobrax-lan-hass-component)**
   von [@gangoke](https://github.com/gangoke) — bindet Sensoren, Drucksteuerung,
   Licht, Kamera und das GCode-Vorschaubild als native Home-Assistant-Entitäten ein.
+- **[Obico (selbst gehostet)](https://github.com/TheSpaghettiDetective/obico-server)** —
+  die Bridge bietet eine Moonraker-kompatible API, die
+  [moonraker-obico](https://github.com/TheSpaghettiDetective/moonraker-obico)
+  akzeptiert; damit hast du Time-Lapse und WebRTC-Live-Stream gegen deinen
+  eigenen Obico-Server. Die KI-Spaghetti-Erkennung ist beim Kobra X
+  experimentell — der Top-Down-Kamerawinkel weicht von dem ab, auf den
+  das Modell trainiert wurde.
 
 > Dies sind **Community-Projekte**, die nicht von KX-Bridge betreut oder
 > supportet werden. Bei Fragen oder Problemen bitte das verlinkte Repository nutzen.

README.es.md

@@ -0,0 +1,277 @@
+<div align="center">
+
+<img src="knlogo.png" alt="KX-Bridge" width="160"/>
+
+# KX-Bridge
+
+**Controla tu Anycubic Kobra X con OrcaSlicer — sin Klipper, sin Raspberry Pi.**
+
+Un puente compatible con Moonraker que se comunica directamente con la impresora.
+
+<sub>🧪 Un usuario en Reddit ha reportado que el puente también funciona con la
+**Kobra S1** y la **Kobra S1 Max** — los protocolos parecen compatibles, pero
+ninguna está oficialmente probada ni soportada. Se agradece el feedback.</sub>
+
+<sub>🇬🇧 <a href="README.md">English version</a>  ·  🇩🇪 <a href="README.de.md">Deutsche Version</a></sub>
+
+<br>
+
+[![Ko-fi](https://img.shields.io/badge/Ko--fi-Apoya%20este%20proyecto-FF5E5B?style=for-the-badge&logo=ko-fi&logoColor=white)](https://ko-fi.com/viewitde)
+&nbsp;
+[![Releases](https://img.shields.io/badge/Descargar-Lanzamientos-2EA043?style=for-the-badge&logo=gitea&logoColor=white)](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases)
+&nbsp;
+[![Downloads](https://img.shields.io/badge/Descargas-800%2B-8957E5?style=for-the-badge&logo=gitea&logoColor=white)](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases)
+&nbsp;
+[![Video](https://img.shields.io/badge/YouTube-Tutorial-FF0000?style=for-the-badge&logo=youtube&logoColor=white)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+<sub>¿Te gusta KX-Bridge? Un café en <a href="https://ko-fi.com/viewitde">Ko-fi</a> mantiene el proyecto vivo. ☕</sub>
+
+</div>
+
+---
+
+## ✨ Características
+
+| | |
+|---|---|
+| 🖨️ | **Control de impresora** — iniciar, pausar, reanudar, cancelar, temperaturas, velocidad de impresión |
+| 📊 | **Estado en tiempo real** — temperatura, progreso, capas, tiempo restante, transmisión de cámara |
+| 🎨 | **AMS / multicolor** — ranuras con **selector de perfil por ranura** (asigna tu propia marca de los perfiles de OrcaSlicer a cada ranura); el puente escribe material y color al display de la impresora |
+| 📦 | **Importa tus propios perfiles de OrcaSlicer** — arrastra un ZIP de `~/.config/OrcaSlicer/user/<id>/filament/` al puente; aparecen en el desplegable de la ranura bajo ★ Perfiles propios |
+| 📷 | **Integración con Obico (experimental)** — Time-Lapse y stream en vivo WebRTC contra un [servidor Obico](https://github.com/TheSpaghettiDetective/obico-server) autoalojado vía moonraker-obico |
+| 📐 | **Stream H.264 directo + altura Z** — ruta de cámara de bajo consumo de CPU para Obico, Z actual derivada de la altura de capa (widget de progreso) |
+| 🗂️ | **Explorador de GCode** — archivos subidos con vistas previas, historial de impresión, búsqueda y filtros |
+| 🧩 | **Multi-impresora** — múltiples impresoras en **una** instancia del puente, cambia mediante un menú desplegable |
+| ➕ | **Añade una impresora con un clic** — solo introduce la IP, las credenciales se importan automáticamente |
+| 🔁 | **Reconexión MQTT robusta** — el puente sobrevive a reinicios nocturnos de la impresora sin reinicio manual |
+| 🌐 | **Interfaz multilingüe** — DE / EN / ES / 中文, detecta automáticamente el idioma del navegador |
+| 🔄 | **Actualización automática** — instala nuevas versiones directamente desde el navegador |
+| 🧠 | **OrcaSlicer** — protocolo Moonraker completo (HTTP + WebSocket); usa el [build OrcaSlicer-KX](#-slicer-recomendado) para emparejamiento correcto de vendor por ranura |
+
+---
+
+## 🚀 Inicio rápido
+
+### 1. Prepara la impresora
+
+Activa el modo LAN en la Kobra X:
+**Pantalla de la impresora → Ajustes → Activar modo LAN**
+
+### 2. Inicia el puente
+
+**Docker (recomendado):**
+```bash
+docker compose up -d
+```
+
+**Binario Linux (sin Docker):**
+```bash
+chmod +x kx-bridge-linux-amd64 && ./kx-bridge-linux-amd64
+```
+
+**EXE Windows (sin Docker):**
+```
+kx-bridge.exe
+```
+
+> ⚠️ **Certificados TLS necesarios para el binario standalone**
+>
+> El bridge habla con el MQTT de la impresora vía mTLS y necesita dos
+> ficheros de certificado **junto al binario**:
+>
+> - `anycubic_slicer.crt`
+> - `anycubic_slicer.key`
+>
+> Ambos vienen en **`anycubic-certs.zip`** en la misma página de release.
+> Descárgalo y extrae los dos ficheros en el mismo directorio que
+> `kx-bridge-linux-amd64` o `kx-bridge.exe`. Sin ellos verás
+> `Verbindung fehlgeschlagen: TLS-Zertifikate fehlen …` (0.9.19.1+) o
+> `[Errno 2] No such file or directory` (versiones anteriores).
+>
+> Estructura correcta:
+> ```
+> ~/kx-bridge/
+> ├── kx-bridge-linux-amd64   (o kx-bridge.exe)
+> ├── anycubic_slicer.crt     ← de anycubic-certs.zip
+> ├── anycubic_slicer.key     ← de anycubic-certs.zip
+> └── config/                 (se crea en el primer arranque)
+> ```
+>
+> Los usuarios de Docker no necesitan hacer esto — los certificados
+> están incluidos en la imagen.
+
+> Con los binarios de Linux y Windows, `config/` y `data/` (configuración,
+> SQLite, almacén de GCode) viven junto al programa. Copia toda la carpeta
+> para mover la instalación.
+
+**Python directamente:**
+```bash
+pip install -r bridge/requirements.txt
+python bridge/kobrax_moonraker_bridge.py
+```
+
+### 3. Configura la impresora
+
+Abre la interfaz web: **`http://IP-DEL-PUENTE:7125`**
+
+En el primer inicio, la pestaña **Impresoras** muestra *"+ Añadir impresora"* — solo introduce la dirección IP
+de la impresora, el resto (usuario, contraseña, ID de dispositivo) se obtiene de la impresora y se desencripta
+automáticamente. Listo.
+
+> ¿Más de una impresora? Simplemente haz clic en *"+ Añadir impresora"* de nuevo — cada una recibe su propio puerto
+> (7125, 7126, …) y se puede seleccionar desde el menú desplegable del encabezado.
+
+### 4. Conecta OrcaSlicer
+
+Impresora → Tipo de conexión **Moonraker** → Host: `http://IP-DEL-PUENTE:7125`
+
+> ⚠️ El tipo de conexión debe ser **Moonraker** (no "Bambu" ni "Klipper").
+> Introduce la URL completa incluyendo `http://` y el puerto `:7125` en el campo de host.
+
+---
+
+## 📺 Vídeo tutorial
+
+[![Configuración y uso de KX-Bridge](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+---
+
+## 🎨 Slicer recomendado
+
+Para una sincronización de filamento AMS correcta ofrecemos una **versión modificada de OrcaSlicer**:
+
+→ **[Lanzamientos de OrcaSlicer-KX](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases/latest)** (Linux AppImage + Windows ZIP)
+
+**PRs upstream incluidos en el build KX:**
+
+- **[PR #13372](https://github.com/SoftFever/OrcaSlicer/pull/13372)** — Corrección de sincronización Moonraker / Happy-Hare AMS (las posiciones de las ranuras se mantienen correctas incluso con ranuras vacías)
+- **[PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)** — Coincidencia de Vendor + Nombre para Moonraker (lee `name` + `vendor_name` por ranura y los empareja con los presets de filamento del usuario), por [@LordGuenni](https://github.com/LordGuenni)
+- **[PR #13315](https://github.com/SoftFever/OrcaSlicer/pull/13315)** — `filament_id` único para presets de usuario (los perfiles nuevos reciben un ID nuevo en vez de heredar `OGFL99` del padre genérico), por [@mrnoisytiger](https://github.com/mrnoisytiger)
+
+**Más cuatro mejoras específicas de KX encima:**
+
+- Respetar el hint de filamento del puente (`tray_info_idx` + vendor)
+- Coincidencia por vendor incluso cuando el preset base no es **is_compatible** con la impresora activa (así un perfil copiado de otra máquina sigue coincidiendo por vendor)
+- Coincidencia por vendor cuando `tray_info_idx` está definido pero su preset es incompatible
+- Búsqueda de dos pasadas: primero presets compatibles, luego todos los visibles
+
+**Por qué importa:** sin #13719 todas las ranuras AMS caen en `Generic PLA` / `Generic PETG` aunque el puente ya envíe la marca concreta (`name + vendor_name + gate_filament_name`). Con el build KX, OrcaSlicer coincide con tus presets de usuario reales — incluyendo los perfiles que importaste al puente vía [Importa tus propios perfiles de OrcaSlicer](#-características).
+
+OrcaSlicer upstream también funciona para rebanar e imprimir — solo pierdes la coincidencia de vendor por ranura en la sincronización AMS. El material y color por ranura se pueden empujar puente → impresora con cualquier slicer (eso va por MQTT, no por el slicer).
+
+OrcaSlicer-KX es un build de [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0); el código fuente de cada PR upstream está en GitHub, los parches específicos de KX en el repo OrcaSlicer-KX.
+
+---
+
+## 🏠 Comunidad e integraciones
+
+- **[Integración con Home Assistant](https://github.com/gangoke/kobrax-lan-hass-component)**
+  por [@gangoke](https://github.com/gangoke) — expone sensores, controles de impresión,
+  luz, cámara y la vista previa del GCode como entidades nativas de Home Assistant.
+- **[Obico (autoalojado)](https://github.com/TheSpaghettiDetective/obico-server)** —
+  el puente expone una API compatible con Moonraker que
+  [moonraker-obico](https://github.com/TheSpaghettiDetective/moonraker-obico)
+  acepta, así obtienes Time-Lapse y streaming en vivo WebRTC contra tu propio
+  servidor Obico. La detección de fallos por IA es experimental en la Kobra X
+  (el ángulo cenital de la cámara difiere del que el modelo fue entrenado).
+
+> Estos son **proyectos de la comunidad**, no mantenidos ni soportados por KX-Bridge.
+> Para preguntas o problemas, utiliza el repositorio enlazado.
+
+---
+
+## 🔧 Obtener credenciales manualmente
+
+Normalmente no es necesario — *"+ Añadir impresora"* lo hace automáticamente. Si lo necesitas:
+
+```bash
+fetch_credentials --ip 192.168.x.x --write-config
+```
+Obtiene las credenciales directamente de la impresora vía HTTP y las escribe en `config/config.ini`.
+Solo se requiere la IP de la impresora, no hace falta un slicer.
+
+Alternativamente (si se desconoce la IP): abre AnycubicSlicerNext, conecta la impresora, luego ejecuta
+`extract_credentials` → muestra usuario, contraseña, ID de dispositivo y la IP de la impresora.
+
+> **Descargas:** [Lanzamientos](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases) → `fetch_credentials` / `extract_credentials` (Linux y Windows)
+
+---
+
+## ⚙️ Comandos útiles
+
+```bash
+docker compose logs -f                 # mostrar registros
+docker compose down                    # detener el puente
+docker compose pull && docker compose up -d   # actualizar a la imagen publicada más reciente
+docker compose up -d --build           # recompilar localmente (en lugar de descargar)
+```
+
+---
+
+## 🩹 Solución de problemas
+
+<details>
+<summary><b>"Credenciales MQTT incorrectas" al iniciar</b></summary>
+
+- Vuelve a añadir la impresora mediante *"+ Añadir impresora"*, o ejecuta
+  `fetch_credentials --ip <ip> --write-config` y reinicia el puente
+- Introduce solo la dirección IP, sin puerto (✗ `192.168.1.102:9883` → ✓ `192.168.1.102`)
+</details>
+
+<details>
+<summary><b>Impresora no encontrada / modo LAN no activado</b></summary>
+
+- En la pantalla de la impresora: Ajustes → Activar modo LAN
+- La impresora y el puente deben estar en la misma red
+</details>
+
+<details>
+<summary><b>Docker: Permiso denegado</b></summary>
+
+```bash
+sudo usermod -aG docker $USER   # luego cierra la sesión y vuelve a iniciarla
+```
+</details>
+
+<details>
+<summary><b>Actualizar desde 0.9.1 o anterior</b></summary>
+
+A partir de 0.9.2, KX-Bridge almacena la configuración en `config/config.ini` en lugar de `.env`.
+La migración se ejecuta automáticamente en el primer inicio después de la actualización — no requiere acción.
+</details>
+
+---
+
+## 🔒 Seguridad
+
+- El puente es accesible en la red local en `http://<IP-del-host>:7125` — **no** lo expongas a internet
+- `config/config.ini` contiene las credenciales de la impresora — no las compartas públicamente
+- Las credenciales **no** otorgan acceso a los servicios en la nube de Anycubic
+
+---
+
+## 📄 Licencia
+
+[![License: GPL v3](https://img.shields.io/badge/License-GPL_v3-blue.svg)](LICENSE)
+
+KX-Bridge se publica bajo la **GNU General Public License v3.0**. Consulta
+[LICENSE](LICENSE) para el texto completo. Las bifurcaciones y modificaciones deben
+permanecer bajo GPLv3 si se redistribuyen.
+
+La implementación del protocolo MQTT es el resultado de una ingeniería inversa
+independiente con fines de interoperabilidad (§69e UrhG / Directiva de Software de la UE
+Art. 6). El material de terceros en el repositorio (certificados TLS de Anycubic)
+**no** está cubierto por GPLv3 y se incluye únicamente para permitir la
+autenticación contra impresoras que el usuario final ya posee. Consulta
+[NOTICE.md](NOTICE.md) para más detalles y el aviso legal.
+
+Este proyecto es independiente y no está afiliado con Anycubic.
+
+<div align="center">
+<br>
+
+**Si KX-Bridge te ayuda, el proyecto agradece tu apoyo:**
+
+[![Ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/viewitde)
+
+</div>

README.md

@@ -8,7 +8,11 @@
 
 A Moonraker-compatible bridge that talks directly to the printer.
 
-<sub>🇩🇪 <a href="README.de.md">Deutsche Version</a></sub>
+<sub>🧪 A community report on Reddit suggests the bridge also works with the
+**Kobra S1** and **Kobra S1 Max** — protocols look compatible, but neither is
+officially tested or supported. Feedback welcome.</sub>
+
+<sub>🇩🇪 <a href="README.de.md">Deutsche Version</a>  ·  🇪🇸 <a href="README.es.md">Versión española</a></sub>
 
 <br>
 
@@ -32,12 +36,17 @@ A Moonraker-compatible bridge that talks directly to the printer.
 |---|---|
 | 🖨️ | **Printer control** — start, pause, resume, cancel, temperatures, print speed |
 | 📊 | **Live status** — temperature, progress, layers, remaining time, camera stream |
-| 🎨 | **AMS / multicolor** — filament slots, per-channel remapping, MMU emulation for OrcaSlicer filament sync |
+| 🎨 | **AMS / multicolor** — slots with per-slot **profile picker** (assign your own brand from OrcaSlicer profiles per slot); bridge writes material & colour back to the printer display |
+| 📦 | **Import your own OrcaSlicer profiles** — drag a ZIP from `~/.config/OrcaSlicer/user/<id>/filament/` into the bridge; they show up in the slot dropdown under ★ Own profiles |
+| 📷 | **Obico integration (experimental)** — Time-Lapse and WebRTC live stream against a self-hosted [Obico server](https://github.com/TheSpaghettiDetective/obico-server) via moonraker-obico |
+| 📐 | **Direct H.264 stream + Z-height** — low-CPU camera path for Obico, current Z derived from layer-height for the print-progress widget |
 | 🗂️ | **GCode browser** — uploaded files with thumbnails, print history, search & filter |
 | 🧩 | **Multi-printer** — multiple printers in **one** bridge instance, switch via dropdown |
 | ➕ | **Add a printer with one click** — just enter the IP, credentials are imported automatically |
+| 🔁 | **Robust MQTT reconnect** — bridge survives overnight printer reboots without manual restart |
+| 🌐 | **Multi-language UI** — DE / EN / ES / 中文, auto-detect browser locale |
 | 🔄 | **Self-update** — install new versions directly in the browser |
-| 🌐 | **OrcaSlicer** — full Moonraker protocol (HTTP + WebSocket), EN/DE UI |
+| 🧠 | **OrcaSlicer** — full Moonraker protocol (HTTP + WebSocket); pair with the [OrcaSlicer-KX build](#-recommended-slicer) for proper per-slot vendor matching |
 
 ---
 
@@ -103,16 +112,28 @@ Printer → Connection type **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ## 🎨 Recommended Slicer
 
-For the best KX-Bridge experience we offer a **patched OrcaSlicer build** that
-bundles three open SoftFever/OrcaSlicer PRs: the Anycubic Kobra X printer
-profile, a multicolor G-code fix and — most importantly — a Moonraker/Happy-Hare
-filament-sync fix that keeps AMS slot positions intact even with an empty slot.
+For proper AMS filament-sync we ship a **patched OrcaSlicer build**:
 
 → **[OrcaSlicer-KX releases](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases/latest)** (Linux AppImage + Windows ZIP)
 
-Standard OrcaSlicer also works; the patched build mainly improves AMS handling.
-It's a build of [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0);
-source is available via the linked PRs.
+**Upstream PRs bundled in the KX build:**
+
+- **[PR #13372](https://github.com/SoftFever/OrcaSlicer/pull/13372)** — Moonraker / Happy-Hare AMS sync fix (slot positions stay correct even with empty slots)
+- **[PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)** — Vendor + Name matching for Moonraker (reads `name` + `vendor_name` per slot and matches against the user's filament presets), by [@LordGuenni](https://github.com/LordGuenni)
+- **[PR #13315](https://github.com/SoftFever/OrcaSlicer/pull/13315)** — Unique `filament_id` for user presets (so newly created custom profiles get a fresh ID instead of inheriting `OGFL99` from the generic parent), by [@mrnoisytiger](https://github.com/mrnoisytiger)
+
+**Plus four KX-specific matching improvements on top:**
+
+- Respect the bridge filament hint (`tray_info_idx` + vendor)
+- Vendor match also when the chosen base preset is **not is_compatible** with the active printer (so a profile copied from a different machine still matches by vendor)
+- Vendor match when `tray_info_idx` is set but its preset is incompatible
+- Two-pass lookup: first compatible presets, then all visible ones
+
+**Why this matters:** without #13719 the AMS slots in OrcaSlicer all fall back to `Generic PLA` / `Generic PETG` even though the bridge already sends the concrete brand (`name + vendor_name + gate_filament_name`). With the KX build OrcaSlicer matches your actual user presets — including profiles you imported into the bridge via the [Import your own OrcaSlicer profiles](#-features) flow.
+
+Stock upstream OrcaSlicer still works for slicing and printing — you just lose the per-slot brand matching on AMS sync. Slot material + colour can still be pushed bridge → printer either way (that goes over MQTT, not via the slicer).
+
+OrcaSlicer-KX is a build of [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0); source for each upstream PR is on GitHub, KX-specific patches live in the OrcaSlicer-KX repo.
 
 ---
 
@@ -121,6 +142,12 @@ source is available via the linked PRs.
 - **[Home Assistant integration](https://github.com/gangoke/kobrax-lan-hass-component)**
   by [@gangoke](https://github.com/gangoke) — exposes sensors, print controls,
   light, camera and the GCode thumbnail as native Home Assistant entities.
+- **[Obico (self-hosted)](https://github.com/TheSpaghettiDetective/obico-server)** —
+  the bridge exposes a Moonraker-compatible surface that
+  [moonraker-obico](https://github.com/TheSpaghettiDetective/moonraker-obico)
+  accepts, so you get Time-Lapse and WebRTC live streaming against your own
+  Obico server. The AI failure-detection side is experimental on the Kobra X
+  (top-down camera angle differs from what the model was trained on).
 
 > These are **community projects**, not maintained or supported by KX-Bridge.
 > For questions or issues, please use the linked repository.

VERSION

@@ -1 +1 @@
-0.9.16
+0.9.25

config_loader.py

@@ -61,6 +61,7 @@ def _load_config_file(path: pathlib.Path):
         "AUTO_LEVELING":        (CONFIG_SECTION_PRINT,   "auto_leveling"),
         "CAMERA_ON_PRINT":      (CONFIG_SECTION_PRINT,   "camera_on_print"),
         "WEB_UPLOAD_WARNING":   (CONFIG_SECTION_PRINT,   "web_upload_warning"),
+        "PRINT_START_DIALOG":   (CONFIG_SECTION_PRINT,   "print_start_dialog"),
         "BRIDGE_PRINTER_NAME":  (CONFIG_SECTION_BRIDGE,  "printer_name"),
     }
     for env_key, (section, option) in mapping.items():
@@ -73,6 +74,18 @@ def _load_config_file(path: pathlib.Path):
                 pass
 
 
+    # Backward compatibility: old key FILE_READY_DIALOG → PRINT_START_DIALOG
+    if "PRINT_START_DIALOG" not in os.environ:
+        try:
+            legacy = cfg.get(CONFIG_SECTION_PRINT, "file_ready_dialog")
+            if legacy:
+                os.environ["PRINT_START_DIALOG"] = legacy
+        except (configparser.NoSectionError, configparser.NoOptionError):
+            pass
+    if "PRINT_START_DIALOG" not in os.environ and "FILE_READY_DIALOG" in os.environ:
+        os.environ["PRINT_START_DIALOG"] = os.environ["FILE_READY_DIALOG"]
+
+
 def migrate_env_to_config(env_path: pathlib.Path, config_path: pathlib.Path):
     """Einmalige Migration: .env → config.ini anlegen."""
     env_vals: dict[str, str] = {}
@@ -166,6 +179,128 @@ def list_printers() -> list[dict]:
     return printers
 
 
+def list_filament_profiles() -> dict[int, dict]:
+    """Liest die [filament_profiles]-Sektion aus config.ini.
+
+    Format pro AMS-Slot — primärer Selector ist (vendor, name), die `id` wird
+    aus der orca_filaments.json beim Speichern nachgeschlagen und mitgeführt
+    (als Hint für OrcaSlicer; das Orca-Datenmodell hat ~136 Profile mit
+    derselben filament_id wie 'OGFL99', d.h. die ID ist nicht eindeutig):
+
+      [filament_profiles]
+      slot_0_vendor = Polymaker
+      slot_0_name   = PolyTerra PLA
+      slot_0_id     = OGFL01
+
+    Gibt einen Dict {slot_index: {"id": ..., "vendor": ..., "name": ...}}
+    zurück. Leere/fehlende Slots werden NICHT aufgenommen — das Default-Mapping
+    (per filament_type) in der Bridge bleibt dann aktiv.
+
+    Backwards-Kompat: alte Configs mit nur (vendor, id) bleiben lesbar; `name`
+    fehlt dann und der Aufrufer kann optional aus der orca_filaments.json
+    rekonstruieren.
+    """
+    path = _find_config_file()
+    if not path:
+        return {}
+    cfg = configparser.ConfigParser()
+    cfg.read(path, encoding="utf-8")
+    if not cfg.has_section("filament_profiles"):
+        return {}
+    result: dict[int, dict] = {}
+    for key, value in cfg.items("filament_profiles"):
+        # Erwartet: slot_<idx>_id oder slot_<idx>_vendor oder slot_<idx>_name
+        if not key.startswith("slot_"):
+            continue
+        parts = key.split("_", 2)
+        if len(parts) < 3:
+            continue
+        try:
+            slot_idx = int(parts[1])
+        except ValueError:
+            continue
+        field = parts[2]
+        if field not in ("id", "vendor", "name"):
+            continue
+        if not value.strip():
+            continue
+        result.setdefault(slot_idx, {})[field] = value.strip()
+    return result
+
+
+def save_filament_profiles(profiles: dict[int, dict]) -> bool:
+    """Schreibt die übergebenen Slot-Profile in die [filament_profiles]-
+    Sektion der config.ini. Existierende Einträge werden komplett ersetzt.
+
+    profiles: {slot_index: {"id": "OGFL01", "vendor": "Polymaker", "name": "PolyTerra PLA"}}
+    Mindestens vendor+name müssen gesetzt sein; id ist optional (Hint).
+    """
+    path = _find_config_file()
+    if not path:
+        return False
+    cfg = configparser.ConfigParser()
+    cfg.read(path, encoding="utf-8")
+    # visible_vendors (Issue #41) ist kein Slot-Mapping — beim Ersetzen der
+    # Sektion erhalten, sonst geht der Vendor-Filter beim Slot-Save verloren.
+    preserved_vendors = None
+    if cfg.has_option("filament_profiles", "visible_vendors"):
+        preserved_vendors = cfg.get("filament_profiles", "visible_vendors")
+    if cfg.has_section("filament_profiles"):
+        cfg.remove_section("filament_profiles")
+    if profiles or preserved_vendors:
+        cfg["filament_profiles"] = {}
+        if preserved_vendors:
+            cfg["filament_profiles"]["visible_vendors"] = preserved_vendors
+        for slot_idx in sorted(profiles.keys()):
+            entry = profiles[slot_idx] or {}
+            if entry.get("vendor"):
+                cfg["filament_profiles"][f"slot_{slot_idx}_vendor"] = entry["vendor"]
+            if entry.get("name"):
+                cfg["filament_profiles"][f"slot_{slot_idx}_name"] = entry["name"]
+            if entry.get("id"):
+                cfg["filament_profiles"][f"slot_{slot_idx}_id"] = entry["id"]
+    with open(path, "w", encoding="utf-8") as f:
+        cfg.write(f)
+    return True
+
+
+def list_visible_vendors() -> list[str]:
+    """Liest [filament_profiles] visible_vendors (komma-separiert) aus config.ini.
+
+    Vendor-Sichtbarkeitsfilter für das Slot-Profil-Dropdown (Issue #41 Option A).
+    Leere Liste = keine Einschränkung (rückwärtskompatibel: alle Vendoren).
+    """
+    path = _find_config_file()
+    if not path:
+        return []
+    cfg = configparser.ConfigParser()
+    cfg.read(path, encoding="utf-8")
+    if not cfg.has_option("filament_profiles", "visible_vendors"):
+        return []
+    raw = cfg.get("filament_profiles", "visible_vendors")
+    return [v.strip() for v in raw.split(",") if v.strip()]
+
+
+def save_visible_vendors(vendors: list[str]) -> bool:
+    """Schreibt visible_vendors in [filament_profiles], ohne die Slot-Mappings
+    (slot_N_*) zu verlieren. Leere Liste entfernt den Key wieder."""
+    path = _find_config_file()
+    if not path:
+        return False
+    cfg = configparser.ConfigParser()
+    cfg.read(path, encoding="utf-8")
+    if not cfg.has_section("filament_profiles"):
+        cfg.add_section("filament_profiles")
+    clean = [v.strip() for v in (vendors or []) if v and v.strip()]
+    if clean:
+        cfg["filament_profiles"]["visible_vendors"] = ", ".join(clean)
+    elif cfg.has_option("filament_profiles", "visible_vendors"):
+        cfg.remove_option("filament_profiles", "visible_vendors")
+    with open(path, "w", encoding="utf-8") as f:
+        cfg.write(f)
+    return True
+
+
 def get(key: str, default: str = "") -> str:
     return os.environ.get(key, default)
 
@@ -181,3 +316,4 @@ DEFAULT_AMS_SLOT = get("DEFAULT_AMS_SLOT", "auto")
 AUTO_LEVELING    = int(get("AUTO_LEVELING","1"))
 CAMERA_ON_PRINT  = int(get("CAMERA_ON_PRINT","0"))
 WEB_UPLOAD_WARNING = int(get("WEB_UPLOAD_WARNING", "1"))
+PRINT_START_DIALOG = int(get("PRINT_START_DIALOG", get("FILE_READY_DIALOG", "1")))

docker-compose.portainer.yml

@@ -0,0 +1,29 @@
+# KX-Bridge — Portainer Stack
+#
+# Paste this into Portainer → Stacks → Add stack → Web editor
+#
+# No configuration needed upfront — just deploy, open http://HOST-IP:7125
+# and add your printer via the UI (IP only, credentials are fetched automatically).
+#
+# All data (config, GCode store, database) is stored in named Docker volumes
+# managed by Portainer.
+
+services:
+  kx-bridge:
+    image: gitea.it-drui.de/viewit/kx-bridge:latest
+    volumes:
+      - kx-bridge-config:/app/config
+      - kx-bridge-data:/app/data
+    ports:
+      # Port 7125 = first printer. Add 7126, 7127, … for each additional printer.
+      - "7125:7125"
+    restart: unless-stopped
+    logging:
+      driver: json-file
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+volumes:
+  kx-bridge-config:
+  kx-bridge-data:

docs/filament-preset-bridge-guide.md

@@ -0,0 +1,344 @@
+# Eigene Filament-Presets anlegen, prüfen und mit KX-Bridge verknüpfen
+
+> **Gilt für:** OrcaSlicer-KX v2.4.0-alpha-kx2 oder neuer
+
+---
+
+## Was ist die `filament_id` und warum ist sie wichtig?
+
+Jedes Filament-Preset in OrcaSlicer hat eine interne `filament_id`. Diese ID wird von der KX-Bridge genutzt, um beim AMS-Sync das richtige Preset zuzuordnen.
+
+- System-Presets (z.B. "Polymaker PolyTerra PLA") haben eine feste ID wie `GFL99` oder `OGFL04`.
+- **Eigene (User-)Presets** bekommen in OrcaSlicer-KX automatisch eine eindeutige ID, die mit `P` beginnt (z.B. `P3a7f2c1`).
+
+Ohne eindeutige ID zeigt OrcaSlicer beim Sync immer "Generic PLA" — auch wenn das Preset existiert.
+
+---
+
+## 1. Eigenes Filament-Preset anlegen
+
+1. OrcaSlicer-KX starten
+2. Rechts oben im **Filament-Dropdown** ein passendes Basis-Preset wählen (z.B. "Generic PLA" oder ein Hersteller-Preset)
+3. Einstellungen nach Wunsch anpassen (Temperaturen, Kühlung, etc.)
+4. Auf das **Speichern-Symbol** (Diskette) klicken → **"Save as new preset"**
+5. Namen eingeben — z.B. `SUNLU PLA+ 2.0`
+   > Der Name muss später exakt so in der Bridge eingetragen werden.
+6. Drucker auswählen: **Anycubic Kobra X 0.4 nozzle** — wichtig für die Kompatibilität!
+7. **Speichern** klicken
+8. OrcaSlicer **einmal neu starten** — erst dann wird die `filament_id` dauerhaft gespeichert.
+
+---
+
+## 2. Eindeutige ID prüfen
+
+Nach dem Neustart prüfen, ob die ID korrekt gesetzt wurde:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+Die Datei öffnen und nach `filament_id` suchen:
+
+```json
+{
+  "filament_id": "P3a7f2c1",
+  ...
+}
+```
+
+✅ Korrekt: ID beginnt mit `P` gefolgt von 7 Hex-Zeichen  
+❌ Fehlt oder leer: OrcaSlicer-KX zu alt — Update auf v2.4.0-alpha-kx2 oder neuer
+
+---
+
+## 3. Preset auf einen anderen PC übertragen (Import)
+
+### Exportieren (Quell-PC)
+
+Die Preset-Datei einfach kopieren:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+### Importieren (Ziel-PC)
+
+**Methode A — Datei direkt kopieren:**
+1. Die `.json`-Datei in das gleiche Verzeichnis auf dem Ziel-PC kopieren
+2. OrcaSlicer neu starten → Preset erscheint im Dropdown
+
+**Methode B — OrcaSlicer Import-Funktion:**
+1. In OrcaSlicer: **File → Import → Import Configs...**
+2. Die `.json`-Datei auswählen
+3. OrcaSlicer neu starten
+
+> **Wichtig:** Die `filament_id` in der Datei bleibt erhalten — das Preset wird auf dem Ziel-PC genauso erkannt wie auf dem Quell-PC.
+
+---
+
+## 4. Preset in KX-Bridge verknüpfen
+
+1. KX-Bridge UI öffnen
+2. **Filament-Verwaltung** → AMS-Slot auswählen
+3. Im Feld **Filament-Name** exakt den OrcaSlicer-Preset-Namen eintragen:
+   ```
+   SUNLU PLA+ 2.0
+   ```
+4. Speichern
+
+Die Bridge sendet beim Sync `filament_name: "SUNLU PLA+ 2.0"` → OrcaSlicer findet das Preset anhand von Name und `filament_id` → zeigt es korrekt an.
+
+---
+
+## Wichtige Hinweise
+
+| Was | Warum |
+|-----|-------|
+| Name in OrcaSlicer und Bridge müssen **exakt** übereinstimmen | Groß-/Kleinschreibung und Sonderzeichen werden verglichen |
+| Preset muss für **Anycubic Kobra X 0.4 nozzle** kompatibel sein | Beim Speichern den richtigen Drucker auswählen |
+| Nach dem ersten Speichern OrcaSlicer **neu starten** | Erst dann wird die `filament_id` persistent geschrieben |
+| **OrcaSlicer-KX v2.4.0-alpha-kx2** oder neuer verwenden | Ältere Versionen generieren keine eindeutige `filament_id` für User-Presets |
+
+---
+---
+
+# How to Create, Verify and Import Custom Filament Presets for KX-Bridge
+
+> **Requires:** OrcaSlicer-KX v2.4.0-alpha-kx2 or newer
+
+---
+
+## What is the `filament_id` and why does it matter?
+
+Every filament preset in OrcaSlicer has an internal `filament_id`. The KX-Bridge uses this ID to match the correct preset during AMS sync.
+
+- System presets (e.g. "Polymaker PolyTerra PLA") have a fixed ID like `GFL99` or `OGFL04`.
+- **Custom (user) presets** automatically receive a unique ID starting with `P` (e.g. `P3a7f2c1`) in OrcaSlicer-KX.
+
+Without a unique ID, OrcaSlicer will always show "Generic PLA" during sync — even if the preset exists.
+
+---
+
+## 1. Create a Custom Filament Preset
+
+1. Launch OrcaSlicer-KX
+2. Select a suitable base preset from the **filament dropdown** (e.g. "Generic PLA" or a vendor preset)
+3. Adjust settings as needed (temperatures, cooling, etc.)
+4. Click the **save icon** (floppy disk) → **"Save as new preset"**
+5. Enter a name — e.g. `SUNLU PLA+ 2.0`
+   > This name must be entered in the bridge exactly as typed here.
+6. Select printer: **Anycubic Kobra X 0.4 nozzle** — required for compatibility!
+7. Click **Save**
+8. **Restart OrcaSlicer once** — the `filament_id` is only written permanently after a restart.
+
+---
+
+## 2. Verify the Unique ID
+
+After restarting, check that the ID was set correctly:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+Open the file and look for `filament_id`:
+
+```json
+{
+  "filament_id": "P3a7f2c1",
+  ...
+}
+```
+
+✅ Correct: ID starts with `P` followed by 7 hex characters  
+❌ Missing or empty: Your OrcaSlicer-KX version is too old — update to v2.4.0-alpha-kx2 or newer
+
+---
+
+## 3. Transfer a Preset to Another PC (Import)
+
+### Export (source PC)
+
+Simply copy the preset file:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+### Import (target PC)
+
+**Method A — Copy file directly:**
+1. Copy the `.json` file to the same directory on the target PC
+2. Restart OrcaSlicer → preset appears in the dropdown
+
+**Method B — OrcaSlicer import function:**
+1. In OrcaSlicer: **File → Import → Import Configs...**
+2. Select the `.json` file
+3. Restart OrcaSlicer
+
+> **Note:** The `filament_id` inside the file is preserved — the preset will be recognized on the target PC exactly as on the source PC.
+
+---
+
+## 4. Link the Preset in KX-Bridge
+
+1. Open the KX-Bridge UI
+2. Go to **Filament Management** → select the AMS slot
+3. In the **Filament Name** field, enter the OrcaSlicer preset name exactly:
+   ```
+   SUNLU PLA+ 2.0
+   ```
+4. Save
+
+The bridge sends `filament_name: "SUNLU PLA+ 2.0"` during sync → OrcaSlicer matches by name and `filament_id` → displays the preset correctly.
+
+---
+
+## Quick Reference
+
+| What | Why |
+|------|-----|
+| Name in OrcaSlicer and Bridge must match **exactly** | Case and special characters are compared |
+| Preset must be compatible with **Anycubic Kobra X 0.4 nozzle** | Select the correct printer when saving |
+| **Restart OrcaSlicer** after saving for the first time | The `filament_id` is only written persistently after a restart |
+| Use **OrcaSlicer-KX v2.4.0-alpha-kx2** or newer | Older versions do not generate a unique `filament_id` for user presets |
+
+---
+---
+
+# Cómo crear, verificar e importar perfiles de filamento personalizados para KX-Bridge
+
+> **Requiere:** OrcaSlicer-KX v2.4.0-alpha-kx2 o superior
+
+---
+
+## ¿Qué es el `filament_id` y por qué es importante?
+
+Cada perfil de filamento en OrcaSlicer tiene un `filament_id` interno. KX-Bridge usa este ID para asignar el perfil correcto durante la sincronización AMS.
+
+- Los perfiles del sistema (p. ej. "Polymaker PolyTerra PLA") tienen un ID fijo como `GFL99` o `OGFL04`.
+- Los **perfiles personalizados (usuario)** reciben automáticamente un ID único que empieza por `P` (p. ej. `P3a7f2c1`) en OrcaSlicer-KX.
+
+Sin un ID único, OrcaSlicer mostrará siempre "Generic PLA" durante la sincronización, aunque el perfil exista.
+
+---
+
+## 1. Crear un perfil de filamento personalizado
+
+1. Iniciar OrcaSlicer-KX
+2. Seleccionar un perfil base adecuado en el **menú desplegable de filamento** (p. ej. "Generic PLA" o un perfil de fabricante)
+3. Ajustar la configuración según sea necesario (temperaturas, refrigeración, etc.)
+4. Hacer clic en el **icono de guardar** (disquete) → **"Save as new preset"**
+5. Introducir un nombre — p. ej. `SUNLU PLA+ 2.0`
+   > Este nombre debe introducirse en la bridge exactamente igual.
+6. Seleccionar impresora: **Anycubic Kobra X 0.4 nozzle** — ¡necesario para la compatibilidad!
+7. Hacer clic en **Guardar**
+8. **Reiniciar OrcaSlicer una vez** — el `filament_id` solo se escribe de forma permanente tras un reinicio.
+
+---
+
+## 2. Verificar el ID único
+
+Tras reiniciar, comprobar que el ID se ha establecido correctamente:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+Abrir el archivo y buscar `filament_id`:
+
+```json
+{
+  "filament_id": "P3a7f2c1",
+  ...
+}
+```
+
+✅ Correcto: el ID empieza por `P` seguido de 7 caracteres hexadecimales  
+❌ Falta o está vacío: la versión de OrcaSlicer-KX es demasiado antigua — actualizar a v2.4.0-alpha-kx2 o superior
+
+---
+
+## 3. Transferir un perfil a otro PC (importar)
+
+### Exportar (PC de origen)
+
+Simplemente copiar el archivo del perfil:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+### Importar (PC de destino)
+
+**Método A — Copiar el archivo directamente:**
+1. Copiar el archivo `.json` al mismo directorio en el PC de destino
+2. Reiniciar OrcaSlicer → el perfil aparece en el menú desplegable
+
+**Método B — Función de importación de OrcaSlicer:**
+1. En OrcaSlicer: **File → Import → Import Configs...**
+2. Seleccionar el archivo `.json`
+3. Reiniciar OrcaSlicer
+
+> **Nota:** El `filament_id` dentro del archivo se conserva — el perfil se reconocerá en el PC de destino exactamente igual que en el de origen.
+
+---
+
+## 4. Vincular el perfil en KX-Bridge
+
+1. Abrir la interfaz de KX-Bridge
+2. Ir a **Gestión de filamentos** → seleccionar la ranura AMS
+3. En el campo **Nombre de filamento**, introducir el nombre exacto del perfil de OrcaSlicer:
+   ```
+   SUNLU PLA+ 2.0
+   ```
+4. Guardar
+
+La bridge envía `filament_name: "SUNLU PLA+ 2.0"` durante la sincronización → OrcaSlicer busca por nombre y `filament_id` → muestra el perfil correctamente.
+
+---
+
+## Referencia rápida
+
+| Qué | Por qué |
+|-----|---------|
+| El nombre en OrcaSlicer y en Bridge debe coincidir **exactamente** | Se comparan mayúsculas, minúsculas y caracteres especiales |
+| El perfil debe ser compatible con **Anycubic Kobra X 0.4 nozzle** | Seleccionar la impresora correcta al guardar |
+| **Reiniciar OrcaSlicer** tras guardar por primera vez | El `filament_id` solo se escribe de forma permanente tras un reinicio |
+| Usar **OrcaSlicer-KX v2.4.0-alpha-kx2** o superior | Las versiones anteriores no generan un `filament_id` único para perfiles de usuario |

env_loader.py

@@ -48,3 +48,4 @@ MODE_ID          = get("MODE_ID",          "")
 DEVICE_ID        = get("DEVICE_ID",        "")
 DEFAULT_AMS_SLOT = get("DEFAULT_AMS_SLOT", "auto")
 AUTO_LEVELING    = int(get("AUTO_LEVELING", "1"))
+PRINT_START_DIALOG = int(get("PRINT_START_DIALOG", get("FILE_READY_DIALOG", "1")))

kobrax_client.py

@@ -27,6 +27,7 @@ import hashlib
 import json
 import logging
 import os
+import select
 import socket
 import ssl
 import sys
@@ -120,6 +121,10 @@ class KobraXClient:
         self._buf     = b""
         self._pid     = 1
         self._lock    = threading.Lock()
+        # Generations-Marker: wird bei jedem Socket-Swap/Close erhöht, damit der
+        # Reader-Thread erkennt wenn _reconnect/_do_connect den Socket unter ihm
+        # ersetzt hat (Issue #53). Schützt gegen recv auf einem stale fd.
+        self._sock_gen = 0
         self._running = False
 
         # Pending requests by msgid (for response ACK)
@@ -154,63 +159,120 @@ class KobraXClient:
     # -- Connection ----------------------------------------------------------
 
     def _do_connect(self):
+        if not os.path.exists(CERT_FILE) or not os.path.exists(KEY_FILE):
+            raise FileNotFoundError(
+                f"TLS-Zertifikate fehlen: anycubic_slicer.crt + anycubic_slicer.key "
+                f"müssen neben der kx-bridge Binary liegen ({_SCRIPT_DIR}/). "
+                f"Lade anycubic-certs.zip vom Gitea-Release herunter und entpacke "
+                f"die Dateien dorthin."
+            )
         ctx = ssl.SSLContext(ssl.PROTOCOL_TLS_CLIENT)
         ctx.check_hostname = False
         ctx.verify_mode    = ssl.CERT_NONE
         ctx.set_ciphers("DEFAULT:@SECLEVEL=0")
         ctx.load_cert_chain(CERT_FILE, KEY_FILE)
 
-        raw        = socket.create_connection((self.host, self.port), timeout=5)
-        self._sock = ctx.wrap_socket(raw)
-        log.info("TLS connected  cipher=%s", self._sock.cipher()[0])
+        # Socket als lokale Variable aufbauen — der Handshake (Connect + CONNACK)
+        # läuft OHNE gehaltenes Lock, damit ein langsamer Connect die Sender nicht
+        # einfriert. Erst der fertige Socket wird unter Lock eingeschwenkt (#53).
+        _ai      = socket.getaddrinfo(self.host, self.port, socket.AF_INET, socket.SOCK_STREAM)
+        raw      = socket.create_connection(_ai[0][4], timeout=5)
+        new_sock = ctx.wrap_socket(raw)
+        log.info("TLS connected  cipher=%s", new_sock.cipher()[0])
 
-        self._sock.sendall(_build_connect(self.client_id, self.username, self.password))
-        self._sock.settimeout(3)
-        r = self._sock.recv(64)
+        new_sock.sendall(_build_connect(self.client_id, self.username, self.password))
+        new_sock.settimeout(3)
+        r = new_sock.recv(64)
         if len(r) < 4 or r[0] != 0x20 or r[3] != 0:
+            try:
+                new_sock.close()
+            except Exception:
+                pass
             raise RuntimeError(f"CONNACK failed: {r.hex()}")
         log.info("CONNACK rc=0")
 
-        self._sock.settimeout(0.2)
-        self._buf = b""
-        self._subscribe(self._sub_topic())
+        new_sock.settimeout(0.2)
+        with self._lock:
+            self._sock = new_sock
+            self._sock_gen += 1
+            self._buf = b""
+        self._subscribe(self._sub_topic())  # nimmt das Lock selbst — nicht verschachteln
         log.debug("MQTT connected to %s:%s", self.host, self.port)
 
     def connect(self):
         self._do_connect()
         self._running = True
-        t = threading.Thread(target=self._read_loop, daemon=True)
-        t.start()
+        self._ensure_reader()
         time.sleep(0.3)
 
+    def _ensure_reader(self):
+        """Stellt sicher dass der Reader-Thread lebt. Wenn der Reader nach einer
+        früheren disconnect/reconnect-Sequenz oder einem unbehandelten Fehler
+        gestorben ist, würden empfangene Replies sonst nie ankommen — publish()
+        würde dann zwar senden, aber auf Antworten ewig warten."""
+        if not self._running:
+            return  # gewollter disconnect
+        t = getattr(self, "_reader_thread", None)
+        if t is not None and t.is_alive():
+            return
+        self._reader_thread = threading.Thread(
+            target=self._read_loop, daemon=True, name="kobrax-mqtt-reader",
+        )
+        self._reader_thread.start()
+
     def disconnect(self):
         self._running = False
-        try:
-            self._sock.close()
-        except Exception:
-            pass
+        with self._lock:
+            try:
+                if self._sock is not None:
+                    self._sock.close()
+            except Exception:
+                pass
+            self._sock = None
+            self._sock_gen += 1
 
     def _reconnect(self):
+        """Persistenter Reconnect: versucht endlos weiter bis der Drucker wieder
+        antwortet oder disconnect() gerufen wurde. Backoff cappt bei 60 s. Die
+        ersten 5 Versuche loggen als WARNING (akute Verbindungsstörung), danach
+        nur DEBUG um Log-Spam bei langem Drucker-Ausfall (z.B. über Nacht
+        ausgeschaltet) zu vermeiden."""
         log.warning("Verbindung verloren – reconnect…")
-        try:
-            self._sock.close()
-        except Exception:
-            pass
-        for delay in [2, 4, 8, 15, 30]:
+        # Close + Invalidierung unter Lock, damit kein Sender mitten im sendall
+        # auf den gerade geschlossenen Socket trifft (Issue #53).
+        with self._lock:
+            try:
+                if self._sock is not None:
+                    self._sock.close()
+            except Exception:
+                pass
+            self._sock = None
+            self._sock_gen += 1
+        delays = [2, 4, 8, 15, 30, 60]
+        attempt = 0
+        while self._running:
+            delay = delays[min(attempt, len(delays) - 1)]
             try:
                 self._do_connect()
-                log.info("Reconnect erfolgreich")
+                log.info("Reconnect erfolgreich (nach %d Versuchen)", attempt + 1)
                 return True
             except Exception as e:
-                log.warning("Reconnect fehlgeschlagen (%s), warte %ss…", e, delay)
-                time.sleep(delay)
-        return False
+                attempt += 1
+                lvl = log.warning if attempt <= 5 else log.debug
+                lvl("Reconnect fehlgeschlagen (%s, Versuch %d), warte %ss…", e, attempt, delay)
+                # Geteiltes Sleep damit disconnect() den Loop schneller bricht.
+                slept = 0.0
+                while slept < delay and self._running:
+                    time.sleep(min(0.5, delay - slept))
+                    slept += 0.5
+        return False  # nur wenn disconnect() gerufen wurde
 
     def _subscribe(self, topic: str):
         with self._lock:
             pid = self._pid
             self._pid += 1
-            self._sock.sendall(_build_subscribe(topic, pid))
+            if self._sock is not None:
+                self._sock.sendall(_build_subscribe(topic, pid))
         log.info("SUB %s", topic)
 
     # -- Read loop -----------------------------------------------------------
@@ -220,17 +282,52 @@ class KobraXClient:
         _empty_count = 0
         while self._running:
             if time.time() - last_ping > 30:
+                ping_ok = False
                 with self._lock:
                     try:
-                        self._sock.sendall(_build_pingreq())
+                        if self._sock is not None:
+                            self._sock.sendall(_build_pingreq())
+                            ping_ok = True
                     except Exception:
-                        if self._running and not self._reconnect():
-                            break
-                        last_ping = time.time()
-                        continue
+                        ping_ok = False
+                # _reconnect() AUSSERHALB des Locks aufrufen — es nimmt das Lock
+                # selbst, und threading.Lock ist nicht reentrant (sonst Deadlock).
+                if not ping_ok:
+                    if self._running and not self._reconnect():
+                        break
                 last_ping = time.time()
+            # Aktuellen Socket + Generation unter Lock greifen, damit ein
+            # paralleler _reconnect/_do_connect-Swap uns nicht auf einem stale
+            # fd pollen lässt (Issue #53).
+            with self._lock:
+                sock = self._sock
+                gen  = self._sock_gen
+            if sock is None:
+                time.sleep(0.05)
+                continue
+
+            # Idle-Wartezeit OHNE Lock — select probt nur die Bereitschaft, so
+            # blockiert der Reader während Leerlauf nie das gemeinsame Lock.
             try:
-                data = self._sock.recv(65536)
+                ready, _, _ = select.select([sock], [], [], 0.2)
+            except (OSError, ValueError):
+                # fd geschlossen/ungültig (Reconnect oder Disconnect mitten im select)
+                if not self._running:
+                    break
+                time.sleep(0.05)
+                continue
+            if not ready:
+                continue  # Leerlauf, kein Lock gehalten
+
+            # Daten liegen an: Lock kurz greifen für das eine recv, serialisiert
+            # gegen alle sendall-Caller. recv blockiert nicht lange (select sagte
+            # ready, Socket-Timeout ist 0.2s).
+            try:
+                with self._lock:
+                    # Socket könnte zwischen select und hier ersetzt worden sein.
+                    if self._sock_gen != gen or self._sock is not sock:
+                        continue
+                    data = sock.recv(65536)
                 if not data:
                     # Windows SSL kann kurzzeitig b"" liefern ohne echten EOF
                     _empty_count += 1
@@ -239,7 +336,7 @@ class KobraXClient:
                     continue
                 _empty_count = 0
                 self._buf += data
-                self._drain()
+                self._drain()  # außerhalb des Locks — Dispatch/event.set() bleibt prompt
             except ssl.SSLWantReadError:
                 continue
             except socket.timeout:
@@ -348,6 +445,9 @@ class KobraXClient:
     # -- Publish + request/response ------------------------------------------
 
     def publish(self, msg_type: str, action: str, data=None, timeout: float = 5.0) -> dict | None:
+        # Falls Reader-Thread aus historischen Gründen tot ist, wiederbeleben —
+        # sonst würden Replies nie ankommen und event.wait() läuft ins Timeout.
+        self._ensure_reader()
         msgid   = str(uuid.uuid4())
         payload = json.dumps({
             "type":      msg_type,
@@ -413,6 +513,7 @@ class KobraXClient:
 
     def publish_web(self, msg_type: str, action: str, data=None) -> None:
         """Fire-and-forget publish on the web/printer topic (used for runtime updates during print)."""
+        self._ensure_reader()
         msgid   = str(uuid.uuid4())
         payload = json.dumps({
             "type":      msg_type,
@@ -429,7 +530,14 @@ class KobraXClient:
             with self._lock:
                 self._sock.sendall(_build_publish(topic, payload))
         except Exception as e:
-            log.error("web send error: %s", e)
+            log.error("web send error: %s, reconnecting…", e)
+            # Reconnect triggern (analog zu publish()); ohne Retry weil
+            # fire-and-forget — der nächste Aufruf wird auf den frischen Socket
+            # treffen.
+            try:
+                self._reconnect()
+            except Exception:
+                pass
 
     # -- High-level commands -------------------------------------------------
 
@@ -545,9 +653,16 @@ class KobraXClient:
             f"Connection: close\r\n\r\n"
         ).encode()
 
-        sock = socket.create_connection((self.host, 18910), timeout=30)
+        # Connect-Timeout kurz (LAN). Während sendall() darf der Socket so
+        # lange brauchen wie nötig — bei großen Dateien (>100 MB) und
+        # langsamerem WLAN am Drucker dauert das Schieben sonst >30 s und
+        # würde den Connect-Timeout fälschlich auslösen. Read-Timeout danach
+        # generös (Drucker verarbeitet die Datei bevor er antwortet).
+        _ai  = socket.getaddrinfo(self.host, 18910, socket.AF_INET, socket.SOCK_STREAM)
+        sock = socket.create_connection(_ai[0][4], timeout=10)
+        sock.settimeout(None)  # blocking während Send
         sock.sendall(headers + body)
-        sock.settimeout(120)  # große GCode-Dateien brauchen Zeit bis der Drucker antwortet
+        sock.settimeout(180)
         response = b""
         try:
             while True:

kx-bridge.spec

@@ -6,7 +6,7 @@
 # ein → zur Laufzeit über sys._MEIPASS lesbar (_WEB_BASE in der Bridge).
 from PyInstaller.utils.hooks import collect_all
 
-datas = [("web", "web")]
+datas = [("web", "web"), ("data", "static"), ("VERSION", ".")]  # bridge/data/ → static/ im _MEIPASS
 binaries = []
 hiddenimports = []
 

orca_filaments.py

@@ -0,0 +1,147 @@
+"""OrcaSlicer Filament-Profil Parser.
+
+Geteilt zwischen dem Generator (tools/gen_orca_filament_list.py) und dem
+Custom-Profile-Import-Endpoint (bridge/kobrax_moonraker_bridge.py).
+
+Liest Orca-Filament-JSON-Dateien (System- oder User-Profile) und gibt
+sie als normalisierte Liste mit (id, name, vendor, type, color) zurück.
+"""
+from __future__ import annotations
+
+import json
+import re
+
+
+def first_str(value, default: str = "") -> str:
+    """Orca-Profile speichern manche Felder als ['wert']. Liefert erstes
+    Element als String."""
+    if isinstance(value, list):
+        return str(value[0]) if value else default
+    if isinstance(value, str):
+        return value
+    return default
+
+
+def clean_name(raw: str) -> str:
+    """Strippt printer-/varianten-spezifische Suffixe:
+      'PolyTerra PLA @base'                       → 'PolyTerra PLA'
+      'Anycubic PLA @Anycubic Kobra X 0.4 nozzle' → 'Anycubic PLA'
+      'Anker Generic PLA 0.4 nozzle'              → 'Anker Generic PLA'
+    """
+    name = re.sub(r"\s*@.*$", "", raw).strip()
+    name = re.sub(r"\s+\d+(\.\d+)?\s*nozzle\s*$", "", name, flags=re.IGNORECASE).strip()
+    return name or raw
+
+
+def parse_profile(data: dict, by_name: dict | None = None,
+                  path_vendor: str | None = None,
+                  source_path: str = "",
+                  system_index: list | None = None) -> dict | None:
+    """Parsed ein einzelnes Orca-Filament-Profil zum Bridge-Schema.
+
+    `by_name` ist optional ein {name: [profile, …]}-Index für Inherits-Resolve
+    aus dem rohen Source-Tree (Generator). Bei Single-File-Import (User-Datei
+    aus OrcaSlicer-User-Dir) reichen wir stattdessen `system_index` rein —
+    die fertige System-Profile-Liste aus orca_filaments.json. Damit können
+    wir filament_id/vendor/type/color über die `inherits`-Kette aus dem
+    System-Parent ableiten, auch wenn das User-Profil diese Felder nicht
+    selbst setzt (typisch: User-Override-Profile haben nur Tweaks).
+
+    Liefert {id, name, vendor, type, color} oder None wenn das Profil
+    keine filament_id hat (z.B. abstrakte @base-Templates).
+    """
+    if not isinstance(data, dict):
+        return None
+    # User-Profile aus dem OrcaSlicer-User-Dir setzen oft KEIN "type"-Feld —
+    # das kommt vom System-Parent. Wir akzeptieren das wenn entweder "type"
+    # explizit "filament" ist ODER ein "inherits" auf ein anderes Profil zeigt.
+    if data.get("type") not in (None, "filament") and not data.get("inherits"):
+        return None
+    if data.get("type") == "filament" and data.get("inherits") is None and not data.get("filament_id"):
+        # type=filament aber kein parent + keine ID → wertloses Stub
+        return None
+    inst = data.get("instantiation", "true")
+    if isinstance(inst, str) and inst.lower() == "false":
+        return None
+
+    # Build system-name-Index für den fallback-Lookup wenn system_index gesetzt.
+    sys_by_name: dict[str, dict] = {}
+    if system_index:
+        for p in system_index:
+            if isinstance(p, dict) and p.get("name"):
+                sys_by_name[p["name"]] = p
+
+    def _resolve(key: str, depth: int = 5):
+        cur_list = [data]
+        for _ in range(depth):
+            for cur in cur_list:
+                v = cur.get(key)
+                if v not in ("", [], None, [""]) and v is not None:
+                    return v
+            # Erst raw-Inherits via by_name (Generator-Pfad)
+            if by_name:
+                next_list: list[dict] = []
+                for cur in cur_list:
+                    parent_name = cur.get("inherits")
+                    if parent_name and parent_name in by_name:
+                        next_list.extend(by_name[parent_name])
+                if next_list:
+                    cur_list = next_list
+                    continue
+            break
+        return None
+
+    def _resolve_via_system_index(key: str):
+        """Inherits-Kette über system_index (clean_name-Match)."""
+        parent_raw = data.get("inherits")
+        if not parent_raw or not sys_by_name:
+            return None
+        parent_clean = clean_name(parent_raw)
+        sys_p = sys_by_name.get(parent_clean)
+        if not sys_p:
+            return None
+        # System-JSON benutzt schon das normalisierte Schema
+        mapping = {
+            "filament_id":              "id",
+            "filament_vendor":          "vendor",
+            "filament_type":            "type",
+            "default_filament_colour":  "color",
+        }
+        return sys_p.get(mapping.get(key, key))
+
+    def _resolve_full(key: str):
+        v = _resolve(key)
+        if v not in ("", [], None, [""]) and v is not None:
+            return v
+        return _resolve_via_system_index(key)
+
+    fid = _resolve_full("filament_id")
+    if not fid or not isinstance(fid, str):
+        return None
+
+    name_raw = data.get("name", fid)
+    name = clean_name(name_raw)
+    vendor = first_str(_resolve_full("filament_vendor")) or (path_vendor or "Generic")
+    ftype  = first_str(_resolve_full("filament_type"), "")
+    color  = first_str(_resolve_full("default_filament_colour"), "")
+
+    return {
+        "id":     fid,
+        "name":   name,
+        "vendor": vendor,
+        "type":   ftype,
+        "color":  color,
+    }
+
+
+def parse_profile_bytes(blob: bytes, source_name: str = "",
+                        system_index: list | None = None) -> dict | None:
+    """Liest ein einzelnes Profil aus JSON-Bytes. Für File-Upload-Pfad.
+    `system_index` ist optional die fertige Liste aus orca_filaments.json —
+    wird für die Inherits-Resolve von User-Profilen genutzt die das volle
+    Schema vom System-Parent erben."""
+    try:
+        data = json.loads(blob.decode("utf-8", errors="replace"))
+    except Exception:
+        return None
+    return parse_profile(data, source_path=source_name, system_index=system_index)

web/themes/default/index.html

@@ -38,105 +38,16 @@
       <option value="de">Deutsch</option>
       <option value="en">English</option>
       <option value="es">Espanol</option>
+      <option value="fr">Français</option>
       <option value="zh-cn">中文(简体)</option>
     </select>
   </div>
-  <button class="theme-btn" onclick="openSettings()" id="settings-btn" title="Einstellungen">⚙</button>
+  <button class="theme-btn" onclick="showPanel('settings')" id="settings-btn" title="Einstellungen">⚙</button>
   <button class="conn-btn disconnected" id="conn-btn" onclick="toggleConnection()">⚡ Verbinden</button>
 </header>
 
 <!-- ═══ SETTINGS MODAL ═══ -->
-<div class="modal-overlay" id="settings-modal" onclick="if(event.target===this)closeSettings()">
-  <div class="modal-box">
-    <div class="modal-header">
-      <span class="modal-title" id="modal-title-settings">Einstellungen</span>
-      <button class="modal-close" onclick="closeSettings()">✕</button>
-    </div>
-
-    <div>
-      <div class="modal-field" style="margin-bottom:12px">
-        <label id="lbl-printer-name" style="font-weight:600">Drucker-Name</label>
-        <input type="text" id="s-printer-name" placeholder="z.B. Kobra X Links">
-      </div>
-      <div class="modal-section" id="modal-sec-connection">Verbindung</div>
-      <div class="modal-field">
-        <label id="lbl-printer-ip">Drucker-IP</label>
-        <input type="text" id="s-printer-ip" placeholder="192.168.x.x">
-        <small id="lbl-ip-hint" style="color:#f80;display:none"></small>
-      </div>
-      <div class="modal-field">
-        <label id="lbl-mqtt-port">MQTT-Port</label>
-        <input type="number" id="s-mqtt-port" placeholder="9883">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-username">MQTT-Benutzername</label>
-        <input type="text" id="s-username" placeholder="userXXXXXXXX" autocomplete="new-password">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-password">MQTT-Passwort</label>
-        <input type="password" id="s-password" autocomplete="new-password">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-device-id">Device-ID</label>
-        <input type="text" id="s-device-id" placeholder="32 Hex-Zeichen">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-mode-id">Mode-ID</label>
-        <input type="text" id="s-mode-id" placeholder="20030">
-      </div>
-    </div>
-
-    <div>
-      <div class="modal-section" id="modal-sec-print">Druckeinstellungen</div>
-      <div class="modal-field">
-        <label id="lbl-default-slot">Standard-Slot (Einfarbdruck)</label>
-        <select id="s-default-slot">
-          <option value="auto" id="opt-slot-auto">Auto (alle belegten Slots)</option>
-          <option value="0" id="opt-slot-0">Slot 1</option>
-          <option value="1" id="opt-slot-1">Slot 2</option>
-          <option value="2" id="opt-slot-2">Slot 3</option>
-          <option value="3" id="opt-slot-3">Slot 4</option>
-        </select>
-      </div>
-      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
-        <input type="checkbox" id="s-auto-leveling" style="width:auto;margin:0">
-        <label id="lbl-auto-leveling" style="margin:0;cursor:pointer" for="s-auto-leveling">Auto-Leveling vor Druck</label>
-      </div>
-      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
-        <input type="checkbox" id="s-camera-on-print" style="width:auto;margin:0">
-        <label id="lbl-camera-on-print" style="margin:0;cursor:pointer" for="s-camera-on-print">Kamera bei Druckstart einschalten</label>
-      </div>
-      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
-        <input type="checkbox" id="s-web-upload-warning" style="width:auto;margin:0">
-        <label id="lbl-web-upload-warning" style="margin:0;cursor:pointer" for="s-web-upload-warning">Warnung bei Web-Upload-Druck anzeigen</label>
-      </div>
-    </div>
-
-    <div>
-      <div class="modal-section" id="modal-sec-poll">Poll-Intervall</div>
-      <div class="poll-btns">
-        <button class="poll-btn" onclick="setPoll(1000)" id="poll-1">1s</button>
-        <button class="poll-btn active" onclick="setPoll(2000)" id="poll-2">2s</button>
-        <button class="poll-btn" onclick="setPoll(5000)" id="poll-5">5s</button>
-      </div>
-    </div>
-
-    <div>
-      <div class="modal-section" id="modal-sec-version">Version</div>
-      <div class="update-row">
-        <span id="s-version-label" style="font-size:13px;color:var(--txt)">–</span>
-        <button class="btn btn-sm" style="background:var(--raised);color:var(--txt)" onclick="checkUpdate()" id="btn-update-check">🔄 <span id="lbl-update-check">Auf Updates prüfen</span></button>
-      </div>
-      <div class="update-status" id="update-status" style="margin-top:6px"></div>
-      <button class="btn btn-sm btn-accent" id="btn-update-apply" style="display:none;margin-top:8px" onclick="applyUpdate()">
-        <span id="lbl-update-apply">Jetzt installieren</span>
-      </button>
-      <div id="update-changelog" style="display:none;margin-top:10px;background:var(--raised);border-radius:6px;padding:10px;font-size:11px;font-family:var(--mono);color:var(--txt2);white-space:pre-wrap;max-height:180px;overflow-y:auto;line-height:1.6"></div>
-    </div>
-
-    <button class="modal-save" onclick="saveSettings()" id="btn-save-settings">Speichern &amp; Neustart</button>
-  </div>
-</div>
+<!-- Settings-Modal entfernt — jetzt #panel-settings (Master-Detail im Main-Bereich) -->
 
 <!-- ═══ AMS SLOT EDIT DIALOG ═══ -->
 <div class="modal-overlay" id="slot-edit-modal" onclick="if(event.target===this)closeSlotEdit()">
@@ -162,11 +73,50 @@
         oninput="highlightMatBtn(this.value)"
         style="margin-top:8px;width:100%;padding:6px 10px;background:var(--raised);border:1px solid var(--border);border-radius:6px;color:var(--txt);font-size:13px;box-sizing:border-box">
     </div>
+    <!-- Orca-Filament-Profil-Override (für AMS-Sync) -->
+    <div style="margin-bottom:20px">
+      <div style="font-size:11px;color:var(--txt2);margin-bottom:6px" id="lbl-slot-profile"></div>
+      <select id="slot-edit-profile"
+        style="width:100%;padding:6px 10px;background:var(--raised);border:1px solid var(--border);border-radius:6px;color:var(--txt);font-size:13px;box-sizing:border-box">
+        <option value="" id="slot-profile-default-opt"></option>
+      </select>
+      <div style="font-size:11px;color:var(--txt2);margin-top:4px" id="slot-profile-hint"></div>
+      <a href="#" onclick="event.preventDefault();openProfileImport()"
+        style="display:inline-block;margin-top:6px;font-size:11px;color:var(--accent);text-decoration:none"
+        id="lbl-slot-profile-import">★ Eigene Profile importieren…</a>
+    </div>
     <button class="btn" id="btn-slot-edit-feed" style="width:100%;margin-bottom:8px" onclick="slotEditFeed()"></button>
     <button class="modal-save" id="btn-slot-edit-save" onclick="saveSlotEdit()"></button>
   </div>
 </div>
 
+<!-- ═══ ORCA-PROFILE-IMPORT-DIALOG (Issue #41) ═══ -->
+<div class="modal-overlay" id="profile-import-modal" onclick="if(event.target===this)closeProfileImport()">
+  <div class="modal-box" style="max-width:480px">
+    <div style="display:flex;justify-content:space-between;align-items:center;margin-bottom:16px">
+      <div style="font-size:16px;font-weight:600" id="profile-import-title">Eigene OrcaSlicer-Profile importieren</div>
+      <button onclick="closeProfileImport()" style="background:none;border:none;color:var(--txt2);font-size:20px;cursor:pointer">×</button>
+    </div>
+    <div style="font-size:12px;color:var(--txt2);margin-bottom:12px;line-height:1.5" id="profile-import-help">
+      Lade ein <b>ZIP</b> deines OrcaSlicer-Filament-Ordners oder einzelne <b>.json</b>-Files hoch.<br>
+      In OrcaSlicer: <i>Help → Show Configuration Folder → user/&lt;id&gt;/filament/</i>
+    </div>
+    <div id="profile-import-drop" style="border:2px dashed var(--border);border-radius:8px;padding:24px;text-align:center;cursor:pointer;margin-bottom:12px"
+      ondragover="event.preventDefault();this.style.borderColor='var(--accent)'"
+      ondragleave="this.style.borderColor='var(--border)'"
+      ondrop="event.preventDefault();this.style.borderColor='var(--border)';doProfileImportUpload(event.dataTransfer.files)"
+      onclick="document.getElementById('profile-import-file').click()">
+      <div style="font-size:32px;margin-bottom:8px">⬆</div>
+      <div style="font-size:13px;color:var(--txt2)" id="profile-import-dropmsg">Hierher ziehen oder klicken</div>
+      <input type="file" id="profile-import-file" accept=".zip,.json" multiple
+        style="display:none" onchange="doProfileImportUpload(this.files);this.value=''">
+    </div>
+    <div id="profile-import-status" style="font-size:12px;margin-bottom:12px;min-height:18px"></div>
+    <div style="font-size:11px;color:var(--txt2);margin-bottom:6px" id="profile-import-list-label">Aktuell importiert</div>
+    <div id="profile-import-list" style="max-height:240px;overflow-y:auto;font-size:12px"></div>
+  </div>
+</div>
+
 <div class="layout">
   <nav class="sidebar">
     <button class="nav-btn active" onclick="showPanel('dashboard')" id="nb-dashboard">
@@ -177,6 +127,8 @@
       <span class="nav-icon">🗂</span><span class="nav-text">Browser</span></button>
     <button class="nav-btn" onclick="showPanel('console');clearLogBadge()" id="nb-console">
       <span class="nav-icon">≡</span><span class="nav-text">Konsole</span><span id="log-badge" style="display:none;margin-left:4px;background:var(--err);color:#fff;border-radius:10px;font-size:10px;padding:1px 5px;font-weight:700"></span></button>
+    <button class="nav-btn" onclick="showPanel('settings')" id="nb-settings">
+      <span class="nav-icon">⚙</span><span class="nav-text" id="nav-settings">Einstellungen</span></button>
   </nav>
 
   <main>
@@ -214,9 +166,15 @@
           <div class="pct-big"><span id="d-pct">0</span><small>%</small></div>
           <div style="display:flex;align-items:center;gap:10px;margin:8px 0">
             <div class="progress-bar" style="flex:1;margin:0"><div class="progress-fill" id="d-pbar" style="width:0%"></div></div>
-            <div class="time-block" style="padding:6px 10px;min-width:72px;text-align:center;flex-shrink:0">
-              <div class="time-label" id="d-lbl-layers"></div>
-              <div class="time-val" style="font-size:16px" id="d-layers">–</div>
+            <div style="display:flex;flex-direction:column;gap:4px;flex-shrink:0">
+              <div class="time-block" style="padding:6px 10px;min-width:72px;text-align:center">
+                <div class="time-label" id="d-lbl-layers"></div>
+                <div class="time-val" style="font-size:16px" id="d-layers">–</div>
+              </div>
+              <div class="time-block" style="padding:4px 10px;min-width:72px;text-align:center">
+                <div class="time-label" id="d-lbl-zpos">Z</div>
+                <div class="time-val" style="font-size:13px" id="d-zpos">–</div>
+              </div>
             </div>
           </div>
           <div class="time-grid">
@@ -234,12 +192,17 @@
             </div>
           </div>
           <div class="fname" id="d-fname" title="" style="margin-top:6px">–</div>
-          <div class="ctrl-btns" id="d-ctrl-btns" style="margin-top:12px">
-            <button class="btn btn-pause btn-sm" id="d-btn-pause" onclick="printAction('pause')">⏸ Pause</button>
-            <button class="btn btn-resume btn-sm" id="d-btn-resume" onclick="printAction('resume')">▶ Weiter</button>
+          <div class="ctrl-btns" id="d-ctrl-btns" style="margin-top:12px;display:none">
+            <button class="btn btn-pause btn-sm" id="d-btn-pause" onclick="togglePauseResume()">⏸ Pause</button>
             <button class="btn btn-skip btn-sm" id="d-btn-skip" onclick="openSkipDialog()" style="display:none">✂ <span id="d-btn-skip-label">Objekte</span></button>
             <button class="btn btn-cancel btn-sm" id="d-btn-cancel" onclick="confirmCancel()">✕ Stopp</button>
           </div>
+          <!-- Aktionen für eine geladene, aber nicht laufende Datei (Issue #55) -->
+          <div class="ctrl-btns" id="d-idle-btns" style="margin-top:12px;display:none">
+            <button class="btn btn-accent btn-sm" id="d-idle-print" onclick="startIdleFile()">▶ <span id="d-idle-print-lbl">Drucken</span></button>
+            <button class="btn btn-sm" id="d-idle-slots" onclick="startIdleFileWithSlots()" style="background:var(--raised);color:var(--txt)">⚙ <span id="d-idle-slots-lbl">Slots zuordnen</span></button>
+            <button class="btn btn-cancel btn-sm" id="d-idle-clear" onclick="clearIdleFile()">✕ <span id="d-idle-clear-lbl">Leeren</span></button>
+          </div>
         </div>
 
         <!-- Temperatursteuerung + Verlauf -->
@@ -462,6 +425,169 @@
         <div class="console" id="console-log" style="height:calc(100vh - 260px);min-height:160px" onscroll="onLogScroll()"></div>
       </div>
     </div>
+
+    <!-- ═══ EINSTELLUNGEN ═══ -->
+    <div class="panel" id="panel-settings">
+      <div class="settings-wrap">
+        <div class="settings-cats">
+          <button class="set-cat active" id="setcat-connection" onclick="showSettingsCat('connection')"><span>🔌</span> <span id="setcat-lbl-connection">Verbindung</span></button>
+          <button class="set-cat" id="setcat-printer" onclick="showSettingsCat('printer')"><span>🖨</span> <span id="setcat-lbl-printer">Drucker</span></button>
+          <button class="set-cat" id="setcat-display" onclick="showSettingsCat('display')"><span>🎨</span> <span id="setcat-lbl-display">Darstellung</span></button>
+          <button class="set-cat" id="setcat-filament" onclick="showSettingsCat('filament')"><span>🧵</span> <span id="setcat-lbl-filament">Filament</span></button>
+          <button class="set-cat" id="setcat-system" onclick="showSettingsCat('system')"><span>⚙</span> <span id="setcat-lbl-system">System</span></button>
+        </div>
+
+        <div class="settings-content">
+          <!-- Verbindung -->
+          <div class="set-group active" id="setgrp-connection">
+            <div class="card">
+              <div class="card-title"><span>🔌</span> <span id="modal-sec-connection">Verbindung</span></div>
+              <div class="modal-field" style="margin-bottom:12px">
+                <label id="lbl-printer-name" style="font-weight:600">Drucker-Name</label>
+                <input type="text" id="s-printer-name" placeholder="z.B. Kobra X Links">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-printer-ip">Drucker-IP</label>
+                <input type="text" id="s-printer-ip" placeholder="192.168.x.x">
+                <small id="lbl-ip-hint" style="color:#f80;display:none"></small>
+              </div>
+              <div class="modal-field">
+                <label id="lbl-mqtt-port">MQTT-Port</label>
+                <input type="number" id="s-mqtt-port" placeholder="9883">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-username">MQTT-Benutzername</label>
+                <input type="text" id="s-username" placeholder="userXXXXXXXX" autocomplete="new-password">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-password">MQTT-Passwort</label>
+                <input type="password" id="s-password" autocomplete="new-password">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-device-id">Device-ID</label>
+                <input type="text" id="s-device-id" placeholder="32 Hex-Zeichen">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-mode-id">Mode-ID</label>
+                <input type="text" id="s-mode-id" placeholder="20030">
+              </div>
+            </div>
+          </div>
+
+          <!-- Drucker -->
+          <div class="set-group" id="setgrp-printer">
+            <div class="card">
+              <div class="card-title"><span>🖨</span> <span id="modal-sec-print">Druckeinstellungen</span></div>
+              <div class="modal-field">
+                <label id="lbl-default-slot">Standard-Slot (Einfarbdruck)</label>
+                <select id="s-default-slot">
+                  <option value="auto" id="opt-slot-auto">Auto (alle belegten Slots)</option>
+                  <option value="0" id="opt-slot-0">Slot 1</option>
+                  <option value="1" id="opt-slot-1">Slot 2</option>
+                  <option value="2" id="opt-slot-2">Slot 3</option>
+                  <option value="3" id="opt-slot-3">Slot 4</option>
+                </select>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <input type="checkbox" id="s-auto-leveling" style="width:auto;margin:0">
+                <label id="lbl-auto-leveling" style="margin:0;cursor:pointer" for="s-auto-leveling">Auto-Leveling vor Druck</label>
+              </div>
+              <div class="modal-field">
+                <label id="lbl-file-ready-mode">Nach Upload: Druckstart-Verhalten</label>
+                <select id="s-file-ready-mode">
+                  <option value="1" id="opt-file-ready-dialog">Print-Dialog</option>
+                  <option value="0" id="opt-file-ready-banner">Print-Leiste</option>
+                </select>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <input type="checkbox" id="s-camera-on-print" style="width:auto;margin:0">
+                <label id="lbl-camera-on-print" style="margin:0;cursor:pointer" for="s-camera-on-print">Kamera bei Druckstart einschalten</label>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <input type="checkbox" id="s-web-upload-warning" style="width:auto;margin:0">
+                <label id="lbl-web-upload-warning" style="margin:0;cursor:pointer" for="s-web-upload-warning">Warnung bei Web-Upload-Druck anzeigen</label>
+              </div>
+            </div>
+          </div>
+
+          <!-- Darstellung -->
+          <div class="set-group" id="setgrp-display">
+            <div class="card">
+              <div class="card-title"><span>🎨</span> <span id="setcat-lbl-display2">Darstellung</span></div>
+              <div class="modal-field">
+                <label id="lbl-set-lang">Sprache</label>
+                <select id="s-lang-select" onchange="setLanguage(this.value)">
+                  <option value="de">Deutsch</option>
+                  <option value="en">English</option>
+                  <option value="es">Espanol</option>
+                  <option value="fr">Français</option>
+                  <option value="zh-cn">中文(简体)</option>
+                </select>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <button class="btn btn-sm" style="background:var(--raised);color:var(--txt)" onclick="toggleTheme()"><span id="lbl-set-theme">Hell / Dunkel umschalten</span></button>
+              </div>
+              <div class="modal-field">
+                <label id="lbl-poll-interval">Poll-Intervall (Sekunden)</label>
+                <input type="number" id="s-poll-interval" min="1" max="60" step="1" placeholder="3" oninput="onPollIntervalInput()">
+                <small style="color:var(--txt2)" id="lbl-poll-hint">Wie oft die Bridge den Drucker-Status abfragt</small>
+              </div>
+            </div>
+          </div>
+
+          <!-- Filament -->
+          <div class="set-group" id="setgrp-filament">
+            <div class="card">
+              <div class="card-title"><span>🧵</span> <span id="modal-sec-orca-profiles">OrcaSlicer-Profile</span></div>
+              <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="orca-profiles-hint">
+                Eigene Profile aus OrcaSlicer importieren (User-Dir öffnen via Help → Show Configuration Folder)
+              </div>
+              <div id="orca-profiles-list" style="margin-bottom:8px;font-size:12px;color:var(--txt2)"></div>
+              <button class="btn btn-sm" id="btn-orca-profiles-import" onclick="openProfileImport()"
+                style="background:var(--raised);color:var(--txt)">
+                ⬆ <span id="lbl-orca-profiles-import">Profile importieren</span>
+              </button>
+            </div>
+            <div class="card">
+              <div class="card-title"><span>🎯</span> <span id="lbl-filament-mapping">Filament-Profil-Mapping (pro Slot)</span></div>
+              <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="filament-mapping-hint">
+                Festes Orca-Profil pro AMS-Slot. Beim Slicer-Sync sendet die Bridge dieses Profil statt „Generic".
+              </div>
+              <div id="filament-mapping-list"></div>
+              <button class="btn btn-sm" style="background:var(--accent);color:#fff;margin-top:8px" onclick="saveFilamentMapping()"><span id="lbl-filament-mapping-save">Mapping speichern</span></button>
+            </div>
+            <div class="card">
+              <div class="card-title"><span>👁</span> <span id="lbl-visible-vendors">Sichtbare Hersteller (Profil-Dropdown)</span></div>
+              <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="visible-vendors-hint">
+                Nur diese Hersteller erscheinen im Slot-Profil-Dropdown. Nichts ausgewählt = alle anzeigen. „Generic" und eigene Profile sind immer sichtbar.
+              </div>
+              <input type="text" id="vendor-filter-search" placeholder="Hersteller suchen…" oninput="renderVendorChecklist()"
+                style="width:100%;padding:6px 10px;margin-bottom:8px;background:var(--raised);border:1px solid var(--border);border-radius:6px;color:var(--txt);font-size:12px">
+              <div id="visible-vendors-list" style="max-height:260px;overflow-y:auto;border:1px solid var(--border);border-radius:6px;padding:8px"></div>
+              <button class="btn btn-sm" style="background:var(--accent);color:#fff;margin-top:8px" onclick="saveVisibleVendors()"><span id="lbl-visible-vendors-save">Auswahl speichern</span></button>
+            </div>
+          </div>
+
+          <!-- System -->
+          <div class="set-group" id="setgrp-system">
+            <div class="card">
+              <div class="card-title"><span>⚙</span> <span id="modal-sec-version">Version</span></div>
+              <div class="update-row">
+                <span id="s-version-label" style="font-size:13px;color:var(--txt)">–</span>
+                <button class="btn btn-sm" style="background:var(--raised);color:var(--txt)" onclick="checkUpdate()" id="btn-update-check">🔄 <span id="lbl-update-check">Auf Updates prüfen</span></button>
+              </div>
+              <div class="update-status" id="update-status" style="margin-top:6px"></div>
+              <button class="btn btn-sm btn-accent" id="btn-update-apply" style="display:none;margin-top:8px" onclick="applyUpdate()">
+                <span id="lbl-update-apply">Jetzt installieren</span>
+              </button>
+              <div id="update-changelog" style="display:none;margin-top:10px;background:var(--raised);border-radius:6px;padding:10px;font-size:11px;font-family:var(--mono);color:var(--txt2);white-space:pre-wrap;max-height:180px;overflow-y:auto;line-height:1.6"></div>
+            </div>
+          </div>
+
+          <button class="modal-save" onclick="saveSettings()" id="btn-save-settings" style="margin-top:14px">Speichern &amp; Neustart</button>
+        </div>
+      </div>
+    </div>
   </main>
 </div>
 
@@ -470,6 +596,7 @@
   <button class="bnav-btn" onclick="showPanel('printers');loadPrinterTab()" id="bnb-printers"><span class="bnav-icon">🖨</span>Drucker</button>
   <button class="bnav-btn" onclick="showPanel('store');loadStore()" id="bnb-store"><span class="bnav-icon">🗂</span>Browser</button>
   <button class="bnav-btn" onclick="showPanel('console');clearLogBadge()" id="bnb-console"><span class="bnav-icon">≡</span>Log<span id="log-badge-bot" style="display:none;margin-left:3px;background:var(--err);color:#fff;border-radius:10px;font-size:10px;padding:1px 4px;font-weight:700"></span></button>
+  <button class="bnav-btn" onclick="showPanel('settings')" id="bnb-settings"><span class="bnav-icon">⚙</span>Setup</button>
 </nav>
 
 
@@ -499,9 +626,23 @@
     <p id="fd-slots-hint" style="font-size:12px;color:var(--txt2);margin-bottom:10px">GCode-Kanal → AMS-Slot zuweisen:</p>
     <div id="fd-slots" style="display:flex;flex-direction:column;gap:8px;margin-bottom:16px"></div>
     <div id="fd-objects-section" style="display:none;margin-bottom:16px">
-      <p id="fd-objects-hint" style="font-size:12px;color:var(--txt2);margin-bottom:8px">Objekte überspringen (optional):</p>
-      <div id="fd-objects-svg" style="display:none;background:var(--raised);border:1px solid var(--border);border-radius:8px;padding:6px;margin-bottom:8px;text-align:center"></div>
-      <div id="fd-objects" style="display:flex;flex-direction:column;gap:6px;max-height:140px;overflow-y:auto"></div>
+      <button type="button" id="fd-objects-toggle" onclick="toggleFdObjects()"
+        style="display:flex;align-items:center;gap:8px;width:100%;padding:8px 10px;background:var(--raised);border:1px solid var(--border);border-radius:8px;color:var(--txt);cursor:pointer;font-size:12px;text-align:left">
+        <span id="fd-objects-arrow" style="font-size:10px;transition:transform .15s">▶</span>
+        <span>✂ <span id="fd-objects-toggle-lbl">Objekte überspringen</span></span>
+        <span id="fd-objects-count" style="margin-left:auto;color:var(--txt2);font-weight:600"></span>
+      </button>
+      <div id="fd-objects-body" style="display:none;margin-top:8px">
+        <div id="fd-objects-svg" style="display:none;background:var(--raised);border:1px solid var(--border);border-radius:8px;padding:6px;margin-bottom:8px;text-align:center"></div>
+        <div id="fd-objects" style="display:flex;flex-direction:column;gap:6px;max-height:140px;overflow-y:auto"></div>
+      </div>
+    </div>
+    <div style="margin-bottom:14px;padding:10px 12px;background:var(--raised);border-radius:8px;border:1px solid var(--border)">
+      <div style="font-size:11px;font-weight:600;color:var(--txt2);margin-bottom:8px;text-transform:uppercase;letter-spacing:.05em" id="fd-options-title">Druckoptionen</div>
+      <div style="display:flex;align-items:center;gap:8px">
+        <input type="checkbox" id="fd-auto-leveling" style="width:auto;margin:0">
+        <label for="fd-auto-leveling" style="margin:0;cursor:pointer;font-size:13px" id="fd-lbl-auto-leveling">Auto-Leveling</label>
+      </div>
     </div>
     <div style="display:flex;gap:8px;justify-content:flex-end">
       <button id="fd-cancel" onclick="closeFilamentDialog()" style="padding:8px 16px;background:var(--raised);border:1px solid var(--border);border-radius:8px;color:var(--txt);cursor:pointer">Abbrechen</button>

web/themes/default/style.css

@@ -212,6 +212,24 @@ canvas.tchart{width:100%;height:60px;display:block;border-radius:6px;background:
 .panel{display:none}
 .panel.active{display:block}
 
+/* ── SETTINGS (Master-Detail) ── */
+.settings-wrap{display:grid;grid-template-columns:200px 1fr;gap:16px;align-items:start}
+.settings-cats{display:flex;flex-direction:column;gap:4px;position:sticky;top:12px}
+.set-cat{display:flex;align-items:center;gap:8px;padding:10px 12px;border-radius:8px;
+  border:1px solid transparent;background:var(--raised);color:var(--txt2);cursor:pointer;
+  font-size:13px;text-align:left;transition:background .15s,color .15s}
+.set-cat:hover{color:var(--txt)}
+.set-cat.active{background:var(--accent);color:#fff;border-color:var(--accent)}
+.set-group{display:none}
+.set-group.active{display:block}
+.set-group .card{margin-bottom:14px}
+@media(max-width:768px){
+  .settings-wrap{grid-template-columns:1fr}
+  .settings-cats{flex-direction:row;flex-wrap:wrap;position:static;overflow-x:auto}
+  .set-cat{flex:1;min-width:auto;justify-content:center;padding:8px 6px;font-size:12px}
+  .set-cat .nav-text{display:inline}
+}
+
 /* ── FILE BROWSER UPLOAD ZONE ── */
 #store-upload-zone{
   display:flex;flex-direction:column;align-items:center;justify-content:center;

web/translations/de.json

@@ -37,6 +37,7 @@
   "lbl_remaining": "Restzeit:",
   "lbl_slicer_time": "Slicer-Schätzung:",
   "lbl_layers": "Layer",
+  "lbl_zpos": "Z (mm)",
   "speed_silent": "🐢 Leise",
   "speed_normal": "⚡ Normal",
   "speed_sport": "🚀 Sport",
@@ -126,8 +127,21 @@
   "settings_title": "Einstellungen",
   "settings_connection": "Verbindung",
   "settings_print": "Druckeinstellungen",
-  "settings_poll": "Poll-Intervall",
+  "settings_poll": "Poll-Intervall (Sekunden)",
   "settings_version": "Version",
+  "nav_settings": "Einstellungen",
+  "settings_cat_display": "Darstellung",
+  "settings_cat_filament": "Filament",
+  "settings_cat_language": "Sprache",
+  "settings_cat_theme": "Hell / Dunkel umschalten",
+  "settings_filament_mapping": "Filament-Profil-Mapping (pro Slot)",
+  "settings_filament_mapping_save": "Mapping speichern",
+  "settings_visible_vendors": "Sichtbare Hersteller (Profil-Dropdown)",
+  "settings_visible_vendors_hint": "Nur diese Hersteller erscheinen im Slot-Profil-Dropdown. Nichts ausgewählt = alle anzeigen. „Generic\" und eigene Profile sind immer sichtbar.",
+  "settings_visible_vendors_save": "Auswahl speichern",
+  "progress_action_print": "Drucken",
+  "progress_action_slots": "Slots zuordnen",
+  "progress_action_clear": "Leeren",
   "settings_save": "Speichern & Neustart",
   "settings_printer_name": "Drucker-Name",
   "settings_printer_ip": "Drucker-IP",
@@ -161,6 +175,22 @@
   "slot_edit_save": "💾 Speichern",
   "slot_edit_custom": "z.B. PLA, PETG, ABS…",
   "slot_edit_ok": "AMS Slot",
+  "slot_edit_profile": "OrcaSlicer-Profil",
+  "slot_edit_profile_hint": "Sendet beim OrcaSlicer-Sync die konkrete Marke statt nur „Generic\"",
+  "slot_edit_profile_default": "— Generic (Default) —",
+  "orca_profile_section": "OrcaSlicer-Profile",
+  "orca_profile_hint": "Eigene Profile aus OrcaSlicer importieren (User-Dir öffnen via Help → Show Configuration Folder)",
+  "orca_profile_import_btn": "Profile importieren",
+  "orca_profile_import_link": "★ Eigene Profile importieren…",
+  "orca_profile_import_title": "Eigene OrcaSlicer-Profile importieren",
+  "orca_profile_help_html": "Lade ein <b>ZIP</b> deines OrcaSlicer-Filament-Ordners oder einzelne <b>.json</b>-Files hoch.<br>In OrcaSlicer: <i>Help → Show Configuration Folder → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "Hierher ziehen oder klicken",
+  "orca_profile_list_label": "Aktuell importiert",
+  "orca_profile_user_label": "Eigene Profile",
+  "orca_profile_user_empty": "– keine –",
+  "orca_profile_uploading": "Lade hoch…",
+  "orca_profile_done": "Importiert",
+  "orca_profile_skipped": "übersprungen",
   "log_dir_all": "Alle",
   "log_lvl_label": "Level:",
   "file_ready_btn": "▶ Druck starten",
@@ -176,13 +206,14 @@
   "skip_sending": "Sende …",
   "skip_success": "Objekte werden übersprungen.",
   "fd_objects_hint": "Objekte überspringen (optional):",
+  "fd_objects_toggle": "Objekte überspringen",
   "fd_slots_hint": "GCode-Kanal → AMS-Slot zuweisen:",
   "fd_cancel": "Abbrechen",
   "fd_print": "▶ Drucken",
   "fd_no_slots_msg": "Keine belegten AMS-Slots.{br}Druck trotzdem starten?",
   "fd_slot": "Slot",
   "fd_no_matching_material": "Kein passendes Material",
-  "fd_used": "GENUTZT",
+  "fd_used": "BELEGT",
   "add_printer": "Drucker hinzufügen",
   "apd_lbl_ip": "Drucker-IP",
   "apd_lbl_name": "Name (optional)",
@@ -221,11 +252,40 @@
   "store_upload_busy": "⏳ Hochladen…",
   "store_upload_success": "✓ {file}",
   "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Nur GCode-Dateien erlaubt (.gcode, .3mf, .bgcode)",
   "sf_all": "Alle",
   "sf_ok": "✓ Erfolgreich",
   "sf_err": "✗ Fehler",
   "sf_new": "Neu",
   "ss_date": "↓ Datum",
   "ss_name": "A–Z Name",
-  "ss_dur": "⏱ Druckzeit"
+  "ss_dur": "⏱ Druckzeit",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Custom",
+  "fd_options_title": "Optionen",
+  "print_auto_leveling": "Auto-Leveling für diesen Druck",
+  "settings_file_ready_mode": "Druckdialog starten",
+  "settings_file_ready_banner": "Druckleiste",
+  "settings_file_ready_dialog": "Druckdialog",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Richtung:",
+  "log_lvl_err": "⛔ Fehler",
+  "log_lvl_warn": "⚠ Warnung",
+  "log_topic_label": "Thema:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Druck",
+  "log_topic_info": "Info",
+  "log_topic_status": "Status",
+  "log_download": "⬇ Download",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Leeren",
+  "log_filter_placeholder": "Filtern…",
+  "skip_cancel": "Abbrechen",
+  "skip_confirm": "Überspringen"
 }

web/translations/en.json

@@ -37,6 +37,7 @@
   "lbl_remaining": "Remaining:",
   "lbl_slicer_time": "Slicer estimate:",
   "lbl_layers": "Layer",
+  "lbl_zpos": "Z (mm)",
   "speed_silent": "🐢 Silent",
   "speed_normal": "⚡ Normal",
   "speed_sport": "🚀 Sport",
@@ -68,6 +69,13 @@
   "ace_dry_dialog_save_restart": "Save & Restart",
   "ace_dry_dialog_custom_name": "Custom Name",
   "ace_dry_dialog_reset_default": "Reset to Default",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Custom",
   "cam_placeholder": "📷 Camera not started",
   "cam_stream_unavailable": "Stream unavailable",
   "btn_cam_start": "▶ Camera",
@@ -126,7 +134,20 @@
   "settings_title": "Settings",
   "settings_connection": "Connection",
   "settings_print": "Print Settings",
-  "settings_poll": "Poll Interval",
+  "settings_poll": "Poll Interval (seconds)",
+  "nav_settings": "Settings",
+  "settings_cat_display": "Appearance",
+  "settings_cat_filament": "Filament",
+  "settings_cat_language": "Language",
+  "settings_cat_theme": "Toggle light / dark",
+  "settings_filament_mapping": "Filament profile mapping (per slot)",
+  "settings_filament_mapping_save": "Save mapping",
+  "settings_visible_vendors": "Visible vendors (profile dropdown)",
+  "settings_visible_vendors_hint": "Only these vendors appear in the slot profile dropdown. Nothing selected = show all. \"Generic\" and your own profiles are always visible.",
+  "settings_visible_vendors_save": "Save selection",
+  "progress_action_print": "Print",
+  "progress_action_slots": "Map slots",
+  "progress_action_clear": "Clear",
   "settings_version": "Version",
   "settings_save": "Save & Restart",
   "settings_printer_name": "Printer Name",
@@ -139,7 +160,12 @@
   "hint_ip_no_port": "IP address only, no port (e.g. 192.168.1.102)",
   "settings_default_slot": "Default Slot (single color)",
   "settings_slot_auto": "Auto (all loaded slots)",
-  "settings_auto_leveling": "Auto-Leveling before print",
+  "settings_auto_leveling": "Auto-Leveling Default",
+  "fd_options_title": "Print Options",
+  "print_auto_leveling": "Auto-Leveling",
+  "settings_file_ready_mode": "Start Print Behavior",
+  "settings_file_ready_banner": "Print Bar",
+  "settings_file_ready_dialog": "Print Dialog",
   "settings_camera_on_print": "Turn camera on at print start",
   "settings_web_upload_warning": "Show warning when printing web uploads",
   "update_check": "Check for Updates",
@@ -161,8 +187,38 @@
   "slot_edit_save": "💾 Save",
   "slot_edit_custom": "e.g. PLA, PETG, ABS…",
   "slot_edit_ok": "AMS Slot",
+  "slot_edit_profile": "OrcaSlicer profile",
+  "slot_edit_profile_hint": "Sent on OrcaSlicer sync as the specific brand instead of just \"Generic\"",
+  "slot_edit_profile_default": "— Generic (default) —",
+  "orca_profile_section": "OrcaSlicer Profiles",
+  "orca_profile_hint": "Import your own OrcaSlicer filament profiles (open the user dir via Help → Show Configuration Folder)",
+  "orca_profile_import_btn": "Import profiles",
+  "orca_profile_import_link": "★ Import own profiles…",
+  "orca_profile_import_title": "Import your OrcaSlicer profiles",
+  "orca_profile_help_html": "Upload a <b>ZIP</b> of your OrcaSlicer filament folder or single <b>.json</b> files.<br>In OrcaSlicer: <i>Help → Show Configuration Folder → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "Drop here or click",
+  "orca_profile_list_label": "Currently imported",
+  "orca_profile_user_label": "Own profiles",
+  "orca_profile_user_empty": "– none –",
+  "orca_profile_uploading": "Uploading…",
+  "orca_profile_done": "Imported",
+  "orca_profile_skipped": "skipped",
   "log_dir_all": "All",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Dir:",
   "log_lvl_label": "Level:",
+  "log_lvl_err": "⛔ Errors",
+  "log_lvl_warn": "⚠ Warn",
+  "log_topic_label": "Topic:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Print",
+  "log_topic_info": "Info",
+  "log_topic_status": "Status",
+  "log_download": "⬇ Download",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Clear",
+  "log_filter_placeholder": "Filter…",
   "file_ready_btn": "▶ Start Print",
   "file_slots_btn": "🎨 Select Slots",
   "file_cancel_btn": "✕ Cancel",
@@ -172,10 +228,13 @@
   "skip_btn_label": "Objects",
   "skip_no_objects": "No objects in this print.",
   "skip_already": "skipped",
+  "skip_cancel": "Cancel",
+  "skip_confirm": "Skip",
   "skip_select_at_least_one": "Please pick at least one object.",
   "skip_sending": "Sending …",
   "skip_success": "Objects will be skipped.",
   "fd_objects_hint": "Skip objects (optional):",
+  "fd_objects_toggle": "Skip objects",
   "fd_slots_hint": "Assign GCode channel to AMS slot:",
   "fd_cancel": "Cancel",
   "fd_print": "▶ Print",
@@ -221,6 +280,7 @@
   "store_upload_busy": "⏳ Uploading…",
   "store_upload_success": "✓ {file}",
   "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Only GCode files allowed (.gcode, .3mf, .bgcode)",
   "sf_all": "All",
   "sf_ok": "✓ Completed",
   "sf_err": "✗ Failed",

web/translations/es.json

@@ -20,9 +20,9 @@
   "kobra_finished": "Finalizado",
   "kobra_failed": "Error",
   "kobra_canceled": "Cancelado",
-  "kobra_offline": "Offline",
+  "kobra_offline": "Desconectada",
   "nav_dashboard": "Panel",
-  "nav_print": "Impresion",
+  "nav_print": "Impresión",
   "nav_temps": "Temperaturas",
   "nav_motion": "Movimiento",
   "nav_ams": "AMS",
@@ -31,12 +31,13 @@
   "card_progress": "Progreso",
   "card_temps": "Temperaturas",
   "card_light_fan": "Ventilador",
-  "card_speed": "Velocidad de impresion",
-  "card_cam": "Camara",
+  "card_speed": "Velocidad de impresión",
+  "card_cam": "Cámara",
   "lbl_elapsed": "Transcurrido:",
   "lbl_remaining": "Restante:",
-  "lbl_slicer_time": "Estimacion del slicer:",
-  "lbl_layers": "Layer",
+  "lbl_slicer_time": "Estimación del slicer:",
+  "lbl_layers": "Capa",
+  "lbl_zpos": "Z (mm)",
   "speed_silent": "🐢 Silencioso",
   "speed_normal": "⚡ Normal",
   "speed_sport": "🚀 Sport",
@@ -52,14 +53,14 @@
   "ace_dry_current_temp": "Temperatura",
   "ace_dry_chart": "Historial (Temp/Humedad)",
   "ace_dry_temp": "Temperatura (°C)",
-  "ace_dry_duration": "Duracion (min)",
-  "ace_dry_start": "▶ Start",
-  "ace_dry_stop": "■ Stop",
-  "ace_dry_auto_refill": "Relleno automatico",
+  "ace_dry_duration": "Duración (min)",
+  "ace_dry_start": "▶ Iniciar",
+  "ace_dry_stop": "■ Parar",
+  "ace_dry_auto_refill": "Relleno automático",
   "ace_dry_enable": "Activar secado",
   "ace_dry_temp_line": "Temperatura de secado",
   "ace_dry_time_line": "Tiempo de secado",
-  "ace_dry_ui_pending": "(solo UI, backend despues)",
+  "ace_dry_ui_pending": "(solo UI, backend después)",
   "ace_dry_dialog_title": "Ajustes de temp/tiempo del secador",
   "ace_dry_dialog_temp": "Temperatura (30-80°C)",
   "ace_dry_dialog_time": "Tiempo restante (h:m:s)",
@@ -67,12 +68,12 @@
   "ace_dry_dialog_cancel": "Cancelar",
   "ace_dry_dialog_save_restart": "Guardar y reiniciar",
   "ace_dry_dialog_custom_name": "Nombre personalizado",
-  "ace_dry_dialog_reset_default": "Restablecer por defecto",
-  "cam_placeholder": "📷 Camara no iniciada",
+  "ace_dry_dialog_reset_default": "Restablecer valores predeterminados",
+  "cam_placeholder": "📷 Cámara no iniciada",
   "cam_stream_unavailable": "Stream no disponible",
-  "btn_cam_start": "▶ Camara",
-  "btn_cam_stop": "◼ Camara",
-  "btn_pause": "⏸ Pause",
+  "btn_cam_start": "▶ Cámara",
+  "btn_cam_stop": "◼ Cámara",
+  "btn_pause": "⏸ Pausa",
   "btn_resume": "▶ Reanudar",
   "btn_cancel": "✕ Detener",
   "label_nozzle": "Boquilla",
@@ -81,20 +82,20 @@
   "label_light": "💡 Luz",
   "label_on_off": "Encendido / Apagado",
   "label_speed": "Velocidad",
-  "panel_print_title": "Control de impresion",
-  "panel_print_btn_pause": "⏸ Pause",
+  "panel_print_title": "Control de impresión",
+  "panel_print_btn_pause": "⏸ Pausa",
   "panel_print_btn_resume": "▶ Reanudar",
   "panel_print_btn_cancel": "✕ Cancelar",
   "panel_print_temps_live": "Temperaturas (en vivo)",
   "label_set": "Set",
-  "label_off": "Off",
+  "label_off": "Apagado",
   "panel_temps_nozzle": "Boquilla",
   "panel_temps_bed": "Cama caliente",
-  "panel_temps_chart": "Historial (ultimas 60 lecturas)",
+  "panel_temps_chart": "Historial (últimas 60 lecturas)",
   "label_target_c": "Objetivo:",
   "panel_motion_xy": "Ejes XY",
   "panel_motion_z": "Eje Z",
-  "label_step": "Tamano del paso:",
+  "label_step": "Tamaño del paso:",
   "btn_home_z": "Home Z",
   "btn_home_xy": "Home XY",
   "btn_home_all": "Home All",
@@ -103,11 +104,11 @@
   "card_ams": "Filamento",
   "ams_no_data": "No se recibieron datos de AMS",
   "label_slot": "Ranura",
-  "ams_empty": "Vacio",
+  "ams_empty": "Vacío",
   "panel_extras_light": "Luz",
   "panel_extras_fan": "Ventilador",
-  "panel_extras_camera": "Camara",
-  "btn_cam_start2": "▶ Start",
+  "panel_extras_camera": "Cámara",
+  "btn_cam_start2": "▶ Iniciar",
   "btn_cam_stop2": "◼ Detener",
   "panel_console_title": "Registro de eventos",
   "log_light_on": "Luz encendida",
@@ -118,29 +119,42 @@
   "log_axis": "Eje",
   "log_home": "Home",
   "log_home_all": "Home All",
-  "log_cam_start": "Camara iniciada:",
-  "log_cam_stop": "Camara detenida",
+  "log_cam_start": "Cámara iniciada:",
+  "log_cam_stop": "Cámara detenida",
   "log_poll_error": "Error de sondeo:",
   "log_error": "Error:",
-  "confirm_cancel": "Realmente cancelar la impresion?",
-  "settings_title": "Configuracion",
-  "settings_connection": "Conexion",
-  "settings_print": "Ajustes de impresion",
-  "settings_poll": "Intervalo de sondeo",
-  "settings_version": "Version",
+  "confirm_cancel": "¿Realmente cancelar la impresión?",
+  "settings_title": "Configuración",
+  "settings_connection": "Conexión",
+  "settings_print": "Ajustes de impresión",
+  "settings_poll": "Intervalo de sondeo (segundos)",
+  "nav_settings": "Ajustes",
+  "settings_cat_display": "Apariencia",
+  "settings_cat_filament": "Filamento",
+  "settings_cat_language": "Idioma",
+  "settings_cat_theme": "Alternar claro / oscuro",
+  "settings_filament_mapping": "Asignación de perfil de filamento (por ranura)",
+  "settings_filament_mapping_save": "Guardar asignación",
+  "settings_visible_vendors": "Fabricantes visibles (lista de perfiles)",
+  "settings_visible_vendors_hint": "Solo estos fabricantes aparecen en la lista de perfiles de ranura. Nada seleccionado = mostrar todos. «Generic» y tus propios perfiles siempre son visibles.",
+  "settings_visible_vendors_save": "Guardar selección",
+  "progress_action_print": "Imprimir",
+  "progress_action_slots": "Asignar ranuras",
+  "progress_action_clear": "Vaciar",
+  "settings_version": "Versión",
   "settings_save": "Guardar y reiniciar",
   "settings_printer_name": "Nombre de impresora",
   "settings_printer_ip": "IP de impresora",
   "settings_mqtt_port": "MQTT Port",
   "settings_username": "Usuario MQTT",
-  "settings_password": "Contrasena MQTT",
+  "settings_password": "Contraseña MQTT",
   "settings_device_id": "ID del dispositivo",
-  "settings_mode_id": "Mode ID",
-  "hint_ip_no_port": "Solo direccion IP, sin puerto (p. ej. 192.168.1.102)",
+  "settings_mode_id": "ID de modo",
+  "hint_ip_no_port": "Solo dirección IP, sin puerto (p. ej. 192.168.1.102)",
   "settings_default_slot": "Ranura predeterminada (un color)",
   "settings_slot_auto": "Auto (todos los slots cargados)",
   "settings_auto_leveling": "Autonivelado antes de imprimir",
-  "settings_camera_on_print": "Encender camara al iniciar impresion",
+  "settings_camera_on_print": "Encender cámara al iniciar impresión",
   "settings_web_upload_warning": "Mostrar advertencia al imprimir subidas web",
   "update_check": "Buscar actualizaciones",
   "update_checking": "Comprobando...",
@@ -152,7 +166,7 @@
   "update_error": "Error",
   "btn_connect": "⚡ Conectar",
   "btn_disconnect": "✕ Desconectar",
-  "lbl_conn_error": "Error de conexion:",
+  "lbl_conn_error": "Error de conexión:",
   "slot_edit_title": "Editar slot",
   "slot_edit_color": "Color",
   "slot_edit_material": "Material",
@@ -161,71 +175,117 @@
   "slot_edit_save": "💾 Guardar",
   "slot_edit_custom": "p. ej. PLA, PETG, ABS…",
   "slot_edit_ok": "Ranura AMS",
+  "slot_edit_profile": "Perfil de OrcaSlicer",
+  "slot_edit_profile_hint": "Envía al sincronizar con OrcaSlicer la marca concreta en lugar de solo \"Generic\"",
+  "slot_edit_profile_default": "— Genérico (Predeterminado) —",
+  "orca_profile_section": "Perfiles de OrcaSlicer",
+  "orca_profile_hint": "Importa tus propios perfiles de filamento de OrcaSlicer (abre el directorio del usuario vía Help → Show Configuration Folder)",
+  "orca_profile_import_btn": "Importar perfiles",
+  "orca_profile_import_link": "★ Importar perfiles propios…",
+  "orca_profile_import_title": "Importar tus perfiles de OrcaSlicer",
+  "orca_profile_help_html": "Sube un <b>ZIP</b> de tu carpeta de filamentos de OrcaSlicer o archivos <b>.json</b> sueltos.<br>En OrcaSlicer: <i>Help → Show Configuration Folder → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "Suelta aquí o haz clic",
+  "orca_profile_list_label": "Actualmente importados",
+  "orca_profile_user_label": "Perfiles propios",
+  "orca_profile_user_empty": "– ninguno –",
+  "orca_profile_uploading": "Subiendo…",
+  "orca_profile_done": "Importado",
+  "orca_profile_skipped": "omitido",
   "log_dir_all": "Todos",
-  "log_lvl_label": "Level:",
-  "file_ready_btn": "▶ Iniciar impresion",
+  "log_lvl_label": "Nivel:",
+  "file_ready_btn": "▶ Iniciar impresión",
   "file_slots_btn": "🎨 Seleccionar ranuras",
   "file_cancel_btn": "✕ Cancelar",
   "nav_printers": "Impresoras",
   "skip_title": "✂ Omitir objetos",
-  "skip_hint": "Desmarca objetos que ya no quieras imprimir:",
+  "skip_hint": "Deselecciona los objetos que ya no quieras imprimir:",
   "skip_btn_label": "Objetos",
-  "skip_no_objects": "No hay objetos en esta impresion.",
+  "skip_no_objects": "No hay objetos en esta impresión.",
   "skip_already": "omitido",
-  "skip_select_at_least_one": "Elige al menos un objeto.",
+  "skip_select_at_least_one": "Selecciona al menos un objeto.",
   "skip_sending": "Enviando …",
-  "skip_success": "Se omitiran los objetos.",
+  "skip_success": "Se omitirán los objetos.",
   "fd_objects_hint": "Omitir objetos (opcional):",
+  "fd_objects_toggle": "Omitir objetos",
   "fd_slots_hint": "Asignar canal GCode a la ranura AMS:",
   "fd_cancel": "Cancelar",
   "fd_print": "▶ Imprimir",
-  "fd_no_slots_msg": "No hay slots AMS cargados.{br}Iniciar impresion de todos modos?",
+  "fd_no_slots_msg": "No hay slots AMS cargados.{br}¿Iniciar impresión de todos modos?",
   "fd_slot": "Ranura",
   "fd_no_matching_material": "No hay material compatible",
   "fd_used": "USADO",
-  "add_printer": "Agregar impresora",
+  "add_printer": "Añadir impresora",
   "apd_lbl_ip": "IP de impresora",
   "apd_lbl_name": "Nombre (opcional)",
   "apd_placeholder_name": "p. ej. Kobra X Sala",
   "apd_cancel": "Cancelar",
-  "apd_confirm": "Agregar",
+  "apd_confirm": "Añadir",
   "apd_fetching": "Obteniendo datos de la impresora…",
-  "apd_success": "Impresora agregada, reiniciando bridge…",
-  "apd_err_ip": "Introduce una direccion IP",
+  "apd_success": "Impresora añadida, reiniciando bridge…",
+  "apd_err_ip": "Introduce una dirección IP",
   "printers_remove": "Eliminar impresora",
-  "printers_remove_confirm": "Eliminar impresora \"{name}\"? El bridge se reiniciara.",
+  "printers_remove_confirm": "¿Eliminar impresora \"{name}\"? El bridge se reiniciará.",
   "printers_active": "● activa",
   "printers_switch": "Cambiar →",
   "printers_current": "Impresora actual",
   "printers_loading": "Cargando…",
   "printers_none": "No hay impresoras configuradas.",
-  "printers_empty_hint": "Aun no hay impresora configurada.",
+  "printers_empty_hint": "Aún no hay impresora configurada.",
   "nav_browser": "Explorador",
   "panel_browser_title": "Explorador de archivos",
   "store_search_placeholder": "🔍 Buscar…",
-  "store_empty": "Aun no hay archivos subidos.",
+  "store_empty": "Aún no hay archivos subidos.",
   "store_refresh": "↻ Actualizar",
   "store_print": "▶ Imprimir",
   "store_download": "⬇ Descargar",
-  "store_delete_confirm": "Eliminar archivo?",
-  "store_print_confirm": "Imprimir archivo?",
+  "store_delete_confirm": "¿Eliminar archivo?",
+  "store_print_confirm": "¿Imprimir archivo?",
   "store_web_verify_title": "Verificar archivo",
   "store_web_verify_msg": "Verifica que este archivo fue creado para Anycubic Kobra X.",
   "store_web_verify_confirm": "Confirmar",
   "store_web_verify_abort": "Abortar",
   "store_no_results": "No se encontraron archivos.",
   "store_never": "nunca impreso",
-  "store_estimate": "Estimacion",
-  "store_upload_label_prefix": "Arrastra GCode aqui o ",
+  "store_estimate": "Estimación",
+  "store_upload_label_prefix": "Arrastra el GCode aquí o ",
   "store_upload_label_browse": "buscar",
   "store_upload_busy": "⏳ Subiendo…",
   "store_upload_success": "✓ {file}",
   "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Solo se permiten archivos GCode (.gcode, .3mf, .bgcode)",
   "sf_all": "Todos",
   "sf_ok": "✓ Completado",
   "sf_err": "✗ Fallido",
   "sf_new": "Nuevo",
   "ss_date": "↓ Fecha",
   "ss_name": "A–Z Nombre",
-  "ss_dur": "⏱ Tiempo de impresion"
+  "ss_dur": "⏱ Tiempo de impresión",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Personalizado",
+  "fd_options_title": "Opciones",
+  "print_auto_leveling": "Autonivelado para esta impresión",
+  "settings_file_ready_mode": "Iniciar diálogo de impresión",
+  "settings_file_ready_banner": "Barra de impresión",
+  "settings_file_ready_dialog": "Diálogo de impresión",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Dirección:",
+  "log_lvl_err": "⛔ Errores",
+  "log_lvl_warn": "⚠ Avisos",
+  "log_topic_label": "Tema:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Impresión",
+  "log_topic_info": "Info",
+  "log_topic_status": "Estado",
+  "log_download": "⬇ Descargar",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Limpiar",
+  "log_filter_placeholder": "Filtrar…",
+  "skip_cancel": "Cancelar",
+  "skip_confirm": "Omitir"
 }

web/translations/fr.json

@@ -0,0 +1,291 @@
+{
+  "header_status_standby": "Prêt",
+  "header_status_printing": "Impression",
+  "header_status_complete": "Terminé",
+  "header_status_error": "Erreur",
+  "kobra_free": "Disponible",
+  "kobra_busy": "Occupé",
+  "kobra_printing": "Impression",
+  "kobra_preheating": "Préchauffage",
+  "kobra_auto_leveling": "Mise à niveau auto",
+  "kobra_checking": "Vérification",
+  "kobra_updated": "Mise à jour",
+  "kobra_init": "Initialisation",
+  "kobra_pausing": "Pause en cours…",
+  "kobra_paused": "En pause",
+  "kobra_resuming": "Reprise en cours…",
+  "kobra_resumed": "Repris",
+  "kobra_stopping": "Arrêt en cours…",
+  "kobra_stoped": "Arrêté",
+  "kobra_finished": "Terminé",
+  "kobra_failed": "Erreur",
+  "kobra_canceled": "Annulé",
+  "kobra_offline": "Hors ligne",
+  "nav_dashboard": "Tableau de bord",
+  "nav_print": "Impression",
+  "nav_temps": "Températures",
+  "nav_motion": "Mouvement",
+  "nav_ams": "AMS",
+  "nav_extras": "Lumière / Ventilateur",
+  "nav_console": "Console",
+  "card_progress": "Progression",
+  "card_temps": "Températures",
+  "card_light_fan": "Ventilateur",
+  "card_speed": "Vitesse d'impression",
+  "card_cam": "Caméra",
+  "lbl_elapsed": "Écoulé :",
+  "lbl_remaining": "Restant :",
+  "lbl_slicer_time": "Estimation slicer :",
+  "lbl_layers": "Couche",
+  "lbl_zpos": "Z (mm)",
+  "speed_silent": "🐢 Silencieux",
+  "speed_normal": "⚡ Normal",
+  "speed_sport": "🚀 Sport",
+  "lbl_light": "💡 Lumière",
+  "lbl_feed": "Charger",
+  "lbl_unload": "Décharger",
+  "card_ace_dry": "Séchage ACE",
+  "ace_dry_dryer": "Séchoir",
+  "ace_dry_status_off": "Statut : Arrêté",
+  "ace_dry_status_on": "Statut : Actif",
+  "ace_dry_status_remaining": "Restant",
+  "ace_dry_humidity": "Humidité",
+  "ace_dry_current_temp": "Température",
+  "ace_dry_chart": "Historique (Temp/Humidité)",
+  "ace_dry_temp": "Température (°C)",
+  "ace_dry_duration": "Durée (min)",
+  "ace_dry_start": "▶ Démarrer",
+  "ace_dry_stop": "■ Arrêter",
+  "ace_dry_auto_refill": "Remplissage auto",
+  "ace_dry_enable": "Activer le séchage",
+  "ace_dry_temp_line": "Température de séchage",
+  "ace_dry_time_line": "Durée de séchage",
+  "ace_dry_ui_pending": "(Interface seule, backend suivant)",
+  "ace_dry_dialog_title": "Réglages Temp/Durée du séchoir",
+  "ace_dry_dialog_temp": "Température (30-80°C)",
+  "ace_dry_dialog_time": "Temps restant (h:m:s)",
+  "ace_dry_dialog_confirm": "Confirmer",
+  "ace_dry_dialog_cancel": "Annuler",
+  "ace_dry_dialog_save_restart": "Enregistrer et redémarrer",
+  "ace_dry_dialog_custom_name": "Nom personnalisé",
+  "ace_dry_dialog_reset_default": "Réinitialiser",
+  "cam_placeholder": "📷 Caméra non démarrée",
+  "cam_stream_unavailable": "Flux indisponible",
+  "btn_cam_start": "▶ Caméra",
+  "btn_cam_stop": "◼ Caméra",
+  "btn_pause": "⏸ Pause",
+  "btn_resume": "▶ Reprendre",
+  "btn_cancel": "✕ Arrêter",
+  "label_nozzle": "Buse",
+  "label_bed": "Plateau",
+  "label_fan": "🌀 Ventilateur",
+  "label_light": "💡 Lumière",
+  "label_on_off": "On / Off",
+  "label_speed": "Vitesse",
+  "panel_print_title": "Contrôle impression",
+  "panel_print_btn_pause": "⏸ Pause",
+  "panel_print_btn_resume": "▶ Reprendre",
+  "panel_print_btn_cancel": "✕ Annuler",
+  "panel_print_temps_live": "Températures (en direct)",
+  "label_set": "Définir",
+  "label_off": "Éteint",
+  "panel_temps_nozzle": "Buse",
+  "panel_temps_bed": "Plateau chauffant",
+  "panel_temps_chart": "Historique (60 dernières valeurs)",
+  "label_target_c": "Cible :",
+  "panel_motion_xy": "Axes XY",
+  "panel_motion_z": "Axe Z",
+  "label_step": "Pas :",
+  "btn_home_z": "Origine Z",
+  "btn_home_xy": "Origine XY",
+  "btn_home_all": "Origine Tout",
+  "btn_disable_motors": "Moteurs Off",
+  "panel_ams_title": "Filament",
+  "card_ams": "Filament",
+  "ams_no_data": "Aucune donnée AMS reçue",
+  "label_slot": "Slot",
+  "ams_empty": "Vide",
+  "panel_extras_light": "Lumière",
+  "panel_extras_fan": "Ventilateur",
+  "panel_extras_camera": "Caméra",
+  "btn_cam_start2": "▶ Démarrer",
+  "btn_cam_stop2": "◼ Arrêter",
+  "panel_console_title": "Journal d'événements",
+  "log_light_on": "Lumière allumée",
+  "log_light_off": "Lumière éteinte",
+  "log_fan": "Ventilateur →",
+  "log_nozzle": "Buse →",
+  "log_bed": "Plateau →",
+  "log_axis": "Axe",
+  "log_home": "Origine",
+  "log_home_all": "Origine Tout",
+  "log_cam_start": "Caméra démarrée :",
+  "log_cam_stop": "Caméra arrêtée",
+  "log_poll_error": "Erreur de sondage :",
+  "log_error": "Erreur :",
+  "confirm_cancel": "Vraiment annuler l'impression ?",
+  "settings_title": "Paramètres",
+  "settings_connection": "Connexion",
+  "settings_print": "Paramètres d'impression",
+  "settings_poll": "Intervalle de sondage (secondes)",
+  "nav_settings": "Paramètres",
+  "settings_cat_display": "Apparence",
+  "settings_cat_filament": "Filament",
+  "settings_cat_language": "Langue",
+  "settings_cat_theme": "Basculer clair / sombre",
+  "settings_filament_mapping": "Mappage du profil de filament (par emplacement)",
+  "settings_filament_mapping_save": "Enregistrer le mappage",
+  "settings_visible_vendors": "Fabricants visibles (liste des profils)",
+  "settings_visible_vendors_hint": "Seuls ces fabricants apparaissent dans la liste des profils d'emplacement. Rien de sélectionné = tout afficher. « Generic » et vos propres profils sont toujours visibles.",
+  "settings_visible_vendors_save": "Enregistrer la sélection",
+  "progress_action_print": "Imprimer",
+  "progress_action_slots": "Affecter les emplacements",
+  "progress_action_clear": "Vider",
+  "settings_version": "Version",
+  "settings_save": "Enregistrer et redémarrer",
+  "settings_printer_name": "Nom de l'imprimante",
+  "settings_printer_ip": "IP de l'imprimante",
+  "settings_mqtt_port": "Port MQTT",
+  "settings_username": "Nom d'utilisateur MQTT",
+  "settings_password": "Mot de passe MQTT",
+  "settings_device_id": "ID de l'appareil",
+  "settings_mode_id": "ID du mode",
+  "hint_ip_no_port": "Adresse IP uniquement, sans port (ex. 192.168.1.102)",
+  "settings_default_slot": "Slot par défaut (couleur unique)",
+  "settings_slot_auto": "Auto (tous les slots chargés)",
+  "settings_auto_leveling": "Mise à niveau auto avant impression",
+  "settings_camera_on_print": "Activer la caméra au démarrage de l'impression",
+  "settings_web_upload_warning": "Afficher un avertissement lors de l'impression de fichiers web",
+  "update_check": "Vérifier les mises à jour",
+  "update_checking": "Vérification…",
+  "update_available": "disponible",
+  "update_none": "Déjà à jour",
+  "update_apply": "Installer maintenant",
+  "update_applying": "Téléchargement…",
+  "update_restarting": "Redémarrage…",
+  "update_error": "Erreur",
+  "btn_connect": "⚡ Connecter",
+  "btn_disconnect": "✕ Déconnecter",
+  "lbl_conn_error": "Erreur de connexion :",
+  "slot_edit_title": "Modifier le slot",
+  "slot_edit_color": "Couleur",
+  "slot_edit_material": "Matériau",
+  "slot_edit_load": "⬇ Charger",
+  "slot_edit_unload": "⬆ Décharger",
+  "slot_edit_save": "💾 Enregistrer",
+  "slot_edit_custom": "ex. PLA, PETG, ABS…",
+  "slot_edit_ok": "Slot AMS",
+  "slot_edit_profile": "Profil OrcaSlicer",
+  "slot_edit_profile_hint": "Envoyé lors de la synchronisation OrcaSlicer comme marque spécifique au lieu de \"Générique\"",
+  "slot_edit_profile_default": "— Générique (défaut) —",
+  "orca_profile_section": "Profils OrcaSlicer",
+  "orca_profile_hint": "Importez vos propres profils de filament OrcaSlicer (ouvrez le dossier utilisateur via Aide → Afficher le dossier de configuration)",
+  "orca_profile_import_btn": "Importer des profils",
+  "orca_profile_import_link": "★ Importer mes profils…",
+  "orca_profile_import_title": "Importer vos profils OrcaSlicer",
+  "orca_profile_help_html": "Déposez un <b>ZIP</b> de votre dossier filament OrcaSlicer ou des fichiers <b>.json</b> individuels.<br>Dans OrcaSlicer : <i>Aide → Afficher le dossier de configuration → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "Déposez ici ou cliquez",
+  "orca_profile_list_label": "Profils importés",
+  "orca_profile_user_label": "Mes profils",
+  "orca_profile_user_empty": "– aucun –",
+  "orca_profile_uploading": "Envoi en cours…",
+  "orca_profile_done": "Importé",
+  "orca_profile_skipped": "ignoré",
+  "log_dir_all": "Tout",
+  "log_lvl_label": "Niveau :",
+  "file_ready_btn": "▶ Lancer l'impression",
+  "file_slots_btn": "🎨 Choisir les slots",
+  "file_cancel_btn": "✕ Annuler",
+  "nav_printers": "Imprimantes",
+  "skip_title": "✂ Ignorer des objets",
+  "skip_hint": "Décochez les objets que vous ne souhaitez plus imprimer :",
+  "skip_btn_label": "Objets",
+  "skip_no_objects": "Aucun objet dans cette impression.",
+  "skip_already": "ignoré",
+  "skip_select_at_least_one": "Veuillez sélectionner au moins un objet.",
+  "skip_sending": "Envoi …",
+  "skip_success": "Les objets seront ignorés.",
+  "fd_objects_hint": "Ignorer des objets (optionnel) :",
+  "fd_objects_toggle": "Ignorer des objets",
+  "fd_slots_hint": "Associer le canal GCode au slot AMS :",
+  "fd_cancel": "Annuler",
+  "fd_print": "▶ Imprimer",
+  "fd_no_slots_msg": "Aucun slot AMS chargé.{br}Lancer l'impression quand même ?",
+  "fd_slot": "Slot",
+  "fd_no_matching_material": "Aucun matériau correspondant",
+  "fd_used": "UTILISÉ",
+  "add_printer": "Ajouter une imprimante",
+  "apd_lbl_ip": "IP de l'imprimante",
+  "apd_lbl_name": "Nom (optionnel)",
+  "apd_placeholder_name": "ex. Kobra X Salon",
+  "apd_cancel": "Annuler",
+  "apd_confirm": "Ajouter",
+  "apd_fetching": "Récupération des données de l'imprimante…",
+  "apd_success": "Imprimante ajoutée, redémarrage du bridge…",
+  "apd_err_ip": "Veuillez saisir une adresse IP",
+  "printers_remove": "Supprimer l'imprimante",
+  "printers_remove_confirm": "Supprimer l'imprimante \"{name}\" ? Le bridge va redémarrer.",
+  "printers_active": "● actif",
+  "printers_switch": "Changer →",
+  "printers_current": "Imprimante actuelle",
+  "printers_loading": "Chargement…",
+  "printers_none": "Aucune imprimante configurée.",
+  "printers_empty_hint": "Aucune imprimante configurée.",
+  "nav_browser": "Navigateur",
+  "panel_browser_title": "Explorateur de fichiers",
+  "store_search_placeholder": "🔍 Rechercher…",
+  "store_empty": "Aucun fichier uploadé.",
+  "store_refresh": "↻ Actualiser",
+  "store_print": "▶ Imprimer",
+  "store_download": "⬇ Télécharger",
+  "store_delete_confirm": "Supprimer le fichier ?",
+  "store_print_confirm": "Imprimer le fichier ?",
+  "store_web_verify_title": "Vérifier le fichier",
+  "store_web_verify_msg": "Veuillez vérifier que ce fichier a été créé pour l'Anycubic Kobra X.",
+  "store_web_verify_confirm": "Confirmer",
+  "store_web_verify_abort": "Annuler",
+  "store_no_results": "Aucun fichier trouvé.",
+  "store_never": "jamais imprimé",
+  "store_estimate": "Estimation",
+  "store_upload_label_prefix": "Déposez un GCode ici ou ",
+  "store_upload_label_browse": "parcourir",
+  "store_upload_busy": "⏳ Envoi en cours…",
+  "store_upload_success": "✓ {file}",
+  "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Seuls les fichiers GCode sont autorisés (.gcode, .3mf, .bgcode)",
+  "sf_all": "Tout",
+  "sf_ok": "✓ Terminés",
+  "sf_err": "✗ Échoués",
+  "sf_new": "Nouveau",
+  "ss_date": "↓ Date",
+  "ss_name": "A–Z Nom",
+  "ss_dur": "⏱ Durée d'impression",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Personnalisé",
+  "fd_options_title": "Options",
+  "print_auto_leveling": "Mise à niveau auto pour cette impression",
+  "settings_file_ready_mode": "Démarrer le dialogue d'impression",
+  "settings_file_ready_banner": "Barre d'impression",
+  "settings_file_ready_dialog": "Dialogue d'impression",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Sens :",
+  "log_lvl_err": "⛔ Erreurs",
+  "log_lvl_warn": "⚠ Avert.",
+  "log_topic_label": "Sujet :",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Impression",
+  "log_topic_info": "Info",
+  "log_topic_status": "Statut",
+  "log_download": "⬇ Télécharger",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Effacer",
+  "log_filter_placeholder": "Filtrer…",
+  "skip_cancel": "Annuler",
+  "skip_confirm": "Ignorer"
+}

web/translations/zh-cn.json

@@ -37,6 +37,7 @@
   "lbl_remaining": "剩余时间:",
   "lbl_slicer_time": "切片预估:",
   "lbl_layers": "层",
+  "lbl_zpos": "Z (mm)",
   "speed_silent": "🐢 静音",
   "speed_normal": "⚡ 标准",
   "speed_sport": "🚀 运动",
@@ -126,7 +127,20 @@
   "settings_title": "设置",
   "settings_connection": "连接",
   "settings_print": "打印设置",
-  "settings_poll": "轮询间隔",
+  "settings_poll": "轮询间隔（秒）",
+  "nav_settings": "设置",
+  "settings_cat_display": "外观",
+  "settings_cat_filament": "耗材",
+  "settings_cat_language": "语言",
+  "settings_cat_theme": "切换浅色 / 深色",
+  "settings_filament_mapping": "耗材配置映射（每槽位）",
+  "settings_filament_mapping_save": "保存映射",
+  "settings_visible_vendors": "可见厂商（配置下拉框）",
+  "settings_visible_vendors_hint": "仅这些厂商会出现在槽位配置下拉框中。未选择 = 显示全部。“Generic”和您自己的配置始终可见。",
+  "settings_visible_vendors_save": "保存选择",
+  "progress_action_print": "打印",
+  "progress_action_slots": "分配槽位",
+  "progress_action_clear": "清除",
   "settings_version": "版本",
   "settings_save": "保存并重启",
   "settings_printer_name": "打印机名称",
@@ -161,6 +175,22 @@
   "slot_edit_save": "💾 保存",
   "slot_edit_custom": "例如 PLA, PETG, ABS…",
   "slot_edit_ok": "AMS 槽位",
+  "slot_edit_profile": "OrcaSlicer 配置",
+  "slot_edit_profile_hint": "在 OrcaSlicer 同步时发送具体品牌，而不仅仅是“Generic”",
+  "slot_edit_profile_default": "— 通用 (默认) —",
+  "orca_profile_section": "OrcaSlicer 配置",
+  "orca_profile_hint": "导入你自己的 OrcaSlicer 耗材配置（在 Help → Show Configuration Folder 打开用户目录）",
+  "orca_profile_import_btn": "导入配置",
+  "orca_profile_import_link": "★ 导入自己的配置…",
+  "orca_profile_import_title": "导入你的 OrcaSlicer 配置",
+  "orca_profile_help_html": "上传 OrcaSlicer 耗材文件夹的 <b>ZIP</b> 或单个 <b>.json</b> 文件。<br>在 OrcaSlicer 中: <i>Help → Show Configuration Folder → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "拖到此处或点击",
+  "orca_profile_list_label": "已导入",
+  "orca_profile_user_label": "自己的配置",
+  "orca_profile_user_empty": "– 无 –",
+  "orca_profile_uploading": "上传中…",
+  "orca_profile_done": "已导入",
+  "orca_profile_skipped": "跳过",
   "log_dir_all": "全部",
   "log_lvl_label": "级别:",
   "file_ready_btn": "▶ 开始打印",
@@ -176,6 +206,7 @@
   "skip_sending": "发送中 …",
   "skip_success": "对象将被跳过。",
   "fd_objects_hint": "跳过对象 (可选):",
+  "fd_objects_toggle": "跳过对象",
   "fd_slots_hint": "将 GCode 通道分配到 AMS 槽位:",
   "fd_cancel": "取消",
   "fd_print": "▶ 打印",
@@ -221,11 +252,40 @@
   "store_upload_busy": "⏳ 上传中…",
   "store_upload_success": "✓ {file}",
   "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ 仅允许 GCode 文件 (.gcode, .3mf, .bgcode)",
   "sf_all": "全部",
   "sf_ok": "✓ 已完成",
   "sf_err": "✗ 失败",
   "sf_new": "新",
   "ss_date": "↓ 日期",
   "ss_name": "A–Z 名称",
-  "ss_dur": "⏱ 打印时间"
+  "ss_dur": "⏱ 打印时间",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "自定义",
+  "fd_options_title": "选项",
+  "print_auto_leveling": "本次打印自动调平",
+  "settings_file_ready_mode": "开始打印对话框",
+  "settings_file_ready_banner": "打印栏",
+  "settings_file_ready_dialog": "打印对话框",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "方向:",
+  "log_lvl_err": "⛔ 错误",
+  "log_lvl_warn": "⚠ 警告",
+  "log_topic_label": "主题:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "打印",
+  "log_topic_info": "信息",
+  "log_topic_status": "状态",
+  "log_download": "⬇ 下载",
+  "log_auto": "⬇ 自动",
+  "log_clear": "✕ 清空",
+  "log_filter_placeholder": "筛选…",
+  "skip_cancel": "取消",
+  "skip_confirm": "跳过"
 }