README.md aktualisiert

README.es.md aktualisiert
README.de.md aktualisiert
2026-06-24 14:29:15 +02:00 · 2026-06-24 14:28:52 +02:00 · 2026-06-24 14:28:22 +02:00 · 2026-06-24 13:39:31 +02:00 · 2026-06-24 13:38:23 +02:00 · 2026-06-24 13:35:48 +02:00
43 changed files with 4022 additions and 402 deletions
--- a/.claude/agents/changelog.md
+++ b/.claude/agents/changelog.md
@@ -0,0 +1,31 @@
+---
+name: KX-Bridge Changelog
+description: Generiert einen CHANGELOG.md Eintrag aus Git-Commits seit dem letzten Tag.
+tools:
+  - run_command
+  - read_file
+  - write_file
+---
+
+Du generierst CHANGELOG.md Einträge für KX-Bridge.
+
+Vorgehen:
+1. Führe aus: `git log $(git describe --tags --abbrev=0)..HEAD --oneline`
+2. Gruppiere Commits nach Präfix: feat → Neu, fix → Behoben, chore/refactor/docs → Geändert
+3. Frage nach der Versionsnummer (SemVer: feat→MINOR, fix→PATCH, breaking→MAJOR)
+4. Schreibe den Abschnitt im Format:
+
+```
+## [VERSION] - DATUM
+
+### Neu
+- ...
+
+### Behoben
+- ...
+
+### Geändert
+- ...
+```
+
+5. Füge den Abschnitt am Anfang der bestehenden CHANGELOG.md ein, ohne vorhandene Einträge zu ändern.
--- a/.claude/agents/docker-check.md
+++ b/.claude/agents/docker-check.md
@@ -0,0 +1,32 @@
+---
+name: KX-Bridge Docker Check
+description: Prüft Dockerfile, docker-compose und das gebaute Image auf häufige Probleme.
+tools:
+  - read_file
+  - run_command
+  - search_files
+---
+
+Du prüfst die Docker-Konfiguration von KX-Bridge.
+
+**Dockerfile:**
+- Base-Image aktuell? (`python:3.11-slim` oder neuer)
+- `.dockerignore` vorhanden und vollständig?
+- Keine Secrets oder Zertifikate im Image (`anycubic_slicer.crt/.key` darf NICHT eingebettet sein)
+- Healthcheck vorhanden?
+- Kein `COPY . .` ohne `.dockerignore`
+
+**docker-compose.yml:**
+- Port 7125 korrekt gemappt
+- Config-Volume gemountet (`/app/config`)
+- `restart: unless-stopped` gesetzt
+- Logging-Limits konfiguriert (`max-size`, `max-file`)
+
+**Image-Check (falls lokal vorhanden):**
+```bash
+docker image inspect gitea.it-drui.de/viewit/kx-bridge:nightly
+```
+- Image-Größe sinnvoll (< 500MB)?
+- Keine privaten Keys eingebettet: `docker history --no-trunc`
+
+Berichte nach Schweregrad: Kritisch / Warnung / Hinweis.
--- a/.claude/agents/moonraker-debug.md
+++ b/.claude/agents/moonraker-debug.md
@@ -0,0 +1,23 @@
+---
+name: KX-Bridge Moonraker Debug
+description: Analysiert Moonraker/Klipper Logs und KX-Bridge Ausgaben auf Fehlerursachen.
+tools:
+  - read_file
+  - search_files
+---
+
+Du analysierst Logs für KX-Bridge im Kontext Moonraker/Klipper/AFC.
+
+**Bekannte Problemquellen:**
+- AFC lane_data Indizierung: korrekt ist `lane1`–`lane4` (flat), nicht Slot 0–3
+- `filament_id` muss als String übertragen werden, nicht als Integer
+- Moonraker WebSocket trennt bei Inaktivität → keep-alive prüfen
+- OrcaSlicer sendet Bambu MQTT Format → KX-Bridge muss übersetzen
+- ACE 2 Pro meldet Fehler wenn Lane leer aber als belegt markiert ist
+- MQTT mTLS: Zertifikat muss neben dem Binary liegen (`anycubic_slicer.crt/.key`)
+
+**Bei einem Log:**
+1. Identifiziere den **ersten** Fehler (nicht den letzten Symptom)
+2. Zeige den relevanten Log-Kontext (±10 Zeilen um den Fehler)
+3. Nenne die wahrscheinliche Ursache
+4. Schlage einen konkreten Fix vor (Datei + Funktion wenn möglich)
--- a/.claude/agents/nightly-prep.md
+++ b/.claude/agents/nightly-prep.md
@@ -0,0 +1,25 @@
+---
+name: KX-Bridge Nightly Prep
+description: Bereitet den PR von nightly nach main vor. Prüft ob alle Voraussetzungen für ein Stable Release erfüllt sind.
+tools:
+  - run_command
+  - read_file
+---
+
+Du bereitest einen nightly → main Merge für KX-Bridge vor.
+
+Führe folgende Checks aus und berichte:
+
+1. `git log main..nightly --oneline` → alle Commits die noch nicht in main sind
+2. `git diff main..nightly -- CHANGELOG.md` → ist CHANGELOG.md für alle Änderungen aktualisiert?
+3. Prüfe ob `tests/` alle geänderten Module abdeckt
+4. Prüfe ob Dockerfile ein aktuelles Base-Image verwendet
+5. Schlage eine SemVer-Versionsnummer vor:
+   - `feat:` Commits → MINOR erhöhen
+   - `fix:` Commits → PATCH erhöhen
+   - Breaking Change im Commit-Body → MAJOR erhöhen
+
+Abschlussbericht:
+- ✅ Bereit für Release
+- ⚠️ Offen: [Liste]
+- ❌ Blockiert durch: [Grund]
--- a/.claude/agents/reviewer.md
+++ b/.claude/agents/reviewer.md
@@ -0,0 +1,24 @@
+---
+name: KX-Bridge Reviewer
+description: Reviewt geänderte Dateien vor einem PR auf nightly. Prüft Logik, Fehlerbehandlung, Moonraker-Kompatibilität und Stil.
+tools:
+  - read_file
+  - list_directory
+  - search_files
+---
+
+Du bist Code-Reviewer für KX-Bridge — eine Python-Bridge zwischen OrcaSlicer und Moonraker/Klipper für den Anycubic Kobra X.
+
+Beim Review prüfst du:
+- Korrekte Fehlerbehandlung bei Moonraker HTTP/MQTT Calls (keine unbehandelten Exceptions)
+- Keine hardcodierten IPs oder Ports (müssen aus config.ini kommen)
+- Thread-Sicherheit bei parallelen Moonraker-Abfragen (asyncio korrekt verwendet)
+- AFC lane_data Struktur: flache Indizierung lane1–lane4, kein Slot-Mapping 0–3
+- Kein `print()` statt `logging` (außer in CLI-Hilfsfunktionen)
+- Typ-Annotationen vorhanden, Python 3.8+ kompatibel (kein `X | Y` Syntax)
+- Tests für neue öffentliche Funktionen vorhanden
+
+Ausgabeformat:
+1. **Kritische Fehler** — blockieren den Merge
+2. **Warnungen** — sollten vor Merge behoben werden
+3. **Hinweise** — optional, für zukünftige Verbesserungen
--- a/.claude/agents/test-writer.md
+++ b/.claude/agents/test-writer.md
@@ -0,0 +1,26 @@
+---
+name: KX-Bridge Test Writer
+description: Leitet pytest-Tests aus geänderten oder neuen Python-Dateien ab.
+tools:
+  - read_file
+  - write_file
+  - list_directory
+  - search_files
+---
+
+Du schreibst pytest-Tests für KX-Bridge.
+
+Kontext:
+- Moonraker API läuft auf Port 7125 (HTTP + WebSocket)
+- AFC lane_data: flache Indizierung lane1–lane4
+- Externe HTTP-Calls zu Moonraker werden mit `unittest.mock` gemockt
+- Python 3.8+ Kompatibilität (kein `X | Y` Union-Syntax)
+
+Für jede zu testende Funktion schreibst du:
+1. Happy Path (Normalfall mit validen Eingaben)
+2. Fehlerfall (Moonraker nicht erreichbar, Timeout, falsche Antwort)
+3. Grenzwerte (leere lane_data, ungültige filament_id, None-Werte)
+
+Dateiname: `tests/test_<modulname>.py`
+Verwende pytest-Fixtures für Moonraker-Mock-Responses.
+Keine echten Netzwerkaufrufe in Tests.
--- a/.claude/settings.json
+++ b/.claude/settings.json
@@ -0,0 +1,12 @@
+{
+  "project": "KX-Bridge",
+  "language": "de",
+  "defaultAgent": "reviewer",
+  "context": {
+    "repoBase": "gitea.it-drui.de/viewit/KX-Bridge-Release",
+    "defaultBranch": "nightly",
+    "stableBranch": "main",
+    "registry": "gitea.it-drui.de/viewit/kx-bridge",
+    "moonrakerPort": 7125
+  }
+}
--- a/.gitea/ISSUE_TEMPLATE/bug_report.md
+++ b/.gitea/ISSUE_TEMPLATE/bug_report.md
@@ -0,0 +1,29 @@
+---
+name: Bug Report
+about: Report a bug in KX-Bridge
+labels: bug
+---
+
+## Description
+<!-- What is happening? -->
+
+## Steps to Reproduce
+1.
+2.
+3.
+
+## Expected Behavior
+
+## Actual Behavior
+
+## Environment
+- KX-Bridge Version:
+- OrcaSlicer Version:
+- Moonraker/Klipper Version:
+- Operating System:
+- Installation: Docker / Binary
+
+## Logs
+```
+<!-- docker logs kx-bridge --tail 50 -->
+```
--- a/.gitea/ISSUE_TEMPLATE/feature_request.md
+++ b/.gitea/ISSUE_TEMPLATE/feature_request.md
@@ -0,0 +1,14 @@
+---
+name: Feature Request
+about: Suggest a new feature or improvement
+labels: enhancement
+---
+
+## Description
+<!-- What should be added or improved? -->
+
+## Motivation
+<!-- Why is this useful? What problem does it solve? -->
+
+## Proposed Implementation
+<!-- Optional: How could this be implemented technically? -->
--- a/.gitea/pull_request_template.md
+++ b/.gitea/pull_request_template.md
@@ -0,0 +1,21 @@
+## Description
+<!-- What does this PR change? -->
+
+## Related Issue
+Closes #
+
+## Type
+- [ ] Bug fix
+- [ ] Feature
+- [ ] Documentation
+- [ ] Refactoring
+
+## Tested with
+- OrcaSlicer Version:
+- Printer:
+- Moonraker/Klipper Version:
+
+## Checklist
+- [ ] Tests added/updated
+- [ ] CHANGELOG.md updated
+- [ ] No debug code included
--- a/.gitea/workflows/nightly.yml
+++ b/.gitea/workflows/nightly.yml
@@ -0,0 +1,55 @@
+name: Nightly Build
+
+on:
+  push:
+    branches:
+      - nightly
+  schedule:
+    - cron: '0 2 * * *'
+  workflow_dispatch:
+
+jobs:
+  build:
+    runs-on: self-hosted
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+        with:
+          clean: true
+
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3
+
+      - name: Set up buildx
+        uses: docker/setup-buildx-action@v3
+
+      - name: Login to Gitea registry
+        uses: docker/login-action@v3
+        with:
+          registry: gitea.it-drui.de
+          username: ${{ secrets.REGISTRY_USER }}
+          password: ${{ secrets.REGISTRY_TOKEN }}
+
+      - name: Build & push (amd64 + arm64)
+        run: |
+          DATE=$(date +%Y%m%d)
+          TAGS="gitea.it-drui.de/viewit/kx-bridge:nightly"
+          TAGS="$TAGS,gitea.it-drui.de/viewit/kx-bridge:nightly-$DATE"
+          docker buildx build \
+            --platform linux/amd64,linux/arm64 \
+            --push \
+            --provenance=false \
+            --no-cache \
+            $(echo "$TAGS" | tr ',' '\n' | sed 's/^/-t /') \
+            .
+
+      - name: Set nightly tag
+        env:
+          GITEA_TOKEN: ${{ secrets.RELEASE_TOKEN }}
+        run: |
+          DATE=$(date +%Y%m%d)
+          TAG="nightly-$DATE"
+          git config user.name "gitea-actions"
+          git config user.email "actions@it-drui.de"
+          git tag -f "$TAG"
+          git push origin "$TAG" --force
--- a/.gitea/workflows/pr-check.yml
+++ b/.gitea/workflows/pr-check.yml
@@ -0,0 +1,31 @@
+name: PR Check
+
+on:
+  pull_request:
+    branches:
+      - nightly
+
+jobs:
+  lint-and-test:
+    runs-on: self-hosted
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Python Setup
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.11'
+
+      - name: Dependencies installieren
+        run: pip install -r requirements.txt
+
+      - name: Lint
+        run: |
+          pip install flake8
+          flake8 *.py --max-line-length=120 --extend-ignore=E501
+
+      - name: Tests
+        run: |
+          pip install pytest
+          pytest tests/ -v
+        if: ${{ hashFiles('tests/') != '' }}
--- a/.gitea/workflows/release.yml
+++ b/.gitea/workflows/release.yml
@@ -0,0 +1,58 @@
+name: Stable Release
+
+on:
+  push:
+    tags:
+      - 'v[0-9]+.[0-9]+.[0-9]+'
+
+jobs:
+  release:
+    runs-on: self-hosted
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+        with:
+          clean: true
+
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3
+
+      - name: Set up buildx
+        uses: docker/setup-buildx-action@v3
+
+      - name: Login to Gitea registry
+        uses: docker/login-action@v3
+        with:
+          registry: gitea.it-drui.de
+          username: ${{ secrets.REGISTRY_USER }}
+          password: ${{ secrets.REGISTRY_TOKEN }}
+
+      - name: Build & push (amd64 + arm64)
+        run: |
+          VERSION="${GITHUB_REF#refs/tags/}"
+          docker buildx build \
+            --platform linux/amd64,linux/arm64 \
+            --push \
+            --provenance=false \
+            --no-cache \
+            -t "gitea.it-drui.de/viewit/kx-bridge:latest" \
+            -t "gitea.it-drui.de/viewit/kx-bridge:${VERSION}" \
+            .
+
+      - name: Create Gitea Release
+        env:
+          GITEA_TOKEN: ${{ secrets.RELEASE_TOKEN }}
+        run: |
+          VERSION="${GITHUB_REF#refs/tags/}"
+          CHANGELOG=$(awk "/^## \[${VERSION}\]/{found=1; next} found && /^## \[/{exit} found{print}" CHANGELOG.md || echo "")
+          curl -s -X POST \
+            -H "Authorization: token ${GITEA_TOKEN}" \
+            -H "Content-Type: application/json" \
+            "https://gitea.it-drui.de/api/v1/repos/viewit/KX-Bridge-Release/releases" \
+            -d "{
+              \"tag_name\": \"${VERSION}\",
+              \"name\": \"KX-Bridge ${VERSION}\",
+              \"body\": $(echo "$CHANGELOG" | python3 -c 'import sys,json; print(json.dumps(sys.stdin.read()))'),
+              \"draft\": false,
+              \"prerelease\": false
+            }"
--- a/.gitignore
+++ b/.gitignore
@@ -17,3 +17,8 @@ config/*.ini
 data/

 !data/orca_filaments.json
+
+# Sensitive files — never commit
+.runner-token
+secrets/
+*.token
--- a/CHANGELOG.de.md
+++ b/CHANGELOG.de.md
@@ -1,5 +1,138 @@
 # Changelog

+## [0.9.26] – 2026-06-21
+
+### Neu
+- **Italienische Sprachunterstützung** (PR #66, @Alex_M). Die Bridge-UI ist jetzt vollständig auf Italienisch verfügbar.
+
+### Behoben
+- **Kamera startete immer beim Druckbeginn** (Issue #50). `camera_on_print` fehlte in der `/api/state`-Antwort — JavaScript las `undefined` und startete die Kamera unabhängig vom Setting. Jetzt korrekt im State enthalten.
+- **Auto-Leveling-Setting wurde im Moonraker-Druckpfad ignoriert** (Issue #57). `handle_print_start` las den Wert nur aus den Bridge-Args, nicht aus dem Request-Body — Dialog-Checkbox und Per-Print-Override hatten keine Wirkung. Verhält sich jetzt identisch zum direkten Druckpfad.
+- **Filament-Mapping: Freitext-Felder durch Dropdowns ersetzt** (Issue #57). Falsch getippte Vendor/Name-Kombination brach das Profil-Matching ohne Fehlermeldung; Felder sind jetzt Dropdowns (Vendor → Profil, vendor-gefiltert), sodass nur gültige Kombinationen gespeichert werden können.
+- **Dashboard zeigte generischen Materialtyp statt Profilname** (Issue #57). AMS-Slot-Karten zeigen jetzt den gemappten Profilnamen (z.B. „eSUN PLA-Basic") statt nur „PLA". Fallback auf generischen Typ wenn kein Profil gemappt ist.
+- **Ghost-Profil auf leerem Slot** (Issue #57). Verwaiste Mappings für leere Slots wurden weiterhin angezeigt; leere Slots zeigen jetzt korrekt „–".
+- **Skip-Objects-Panel fehlte im Orca-Upload-Flow** (Issue #57). Panel erscheint jetzt in allen Druckflows; bei frischem Upload fragt die Bridge `fileDetails` beim Drucker nach und pollt die Objektliste bis zu 6 Sekunden nach.
+- **Banner und Dialog erschienen gleichzeitig** (Issue #57). Settings-Save setzt jetzt den Dialog-Cancel-State zurück, sodass der Slot-Mapper nach Wechsel des Start-Print-Verhaltens zuverlässig öffnet.
+- **„Leeren" lud idle-Datei beim nächsten Poll nach** (Issue #57). Leeren setzt jetzt den lokalen State sofort zurück (`file_ready`, `filename`, `thumbnail`) und löscht alle Dialog-Sperren — Vorschaubild und Aktions-Buttons verschwinden sofort und kommen nicht zurück.
+- **Material-Matching für „PLA Silk", „Matte PLA" etc.** (PR #64, @p2l). Modifier+Basis-Muster in beliebiger Wortreihenfolge werden jetzt auf den Basis-Typ normalisiert; Dash-Varianten (PLA-CF) bleiben weiterhin korrekt inkompatibel mit ihrem Basis-Typ.
+
+## [0.9.25] – 2026-06-17
+
+### Behoben
+- **Zufällige Abstürze / Container-Restarts — Segfault in `libcrypto.so.3`
+  (Issue #53).** Der MQTT-über-TLS-Client teilte einen einzelnen SSL-Socket
+  zwischen dem Reader-Thread (`recv`) und den Sender-Threads (`sendall`), ohne sie
+  zu serialisieren. CPythons `ssl`-Modul erlaubt kein gleichzeitiges Lesen und
+  Schreiben auf demselben Socket — die Überlappung korrumpierte den internen
+  OpenSSL-Zustand und löste eine Heap-Corruption + Segfault aus, die auf manchen
+  Hosts timing-bedingt zuverlässig auftrat. Sämtliche Socket-Zugriffe (recv /
+  sendall / close / reconnect) werden nun unter einem einzigen Lock serialisiert;
+  der Reader prüft die Bereitschaft mit `select()` außerhalb des Locks, damit die
+  Sender nie ausgehungert werden. Reconnect und Disconnect tauschen den Socket
+  jetzt atomar. Dank an @BasK für den detaillierten Fault-Handler-Trace.
+- **File-Browser akzeptierte Nicht-GCode-Uploads (Issue #59).** Drag & Drop umging
+  den `accept`-Filter des Dateidialogs, sodass z.B. ein JPG hochgeladen werden
+  konnte. Uploads werden jetzt client- und serverseitig validiert; nur `.gcode`,
+  `.gcode.3mf`, `.3mf` und `.bgcode` werden akzeptiert. Dank an @gangoke.
+
+## [0.9.24] – 2026-06-16
+
+### Neu
+- **Objekte überspringen in jedem Druck-Flow (Issue #57).** Der „Objekte
+  überspringen"-Bereich im Slot-Mapper erschien bisher nur beim Druck aus dem
+  Browser-Tab. Er ist jetzt in allen Flows verfügbar (inkl. Upload / Print-Leiste),
+  standardmäßig eingeklappt hinter einem `✂ Objekte überspringen (N)`-Header, damit
+  der Dialog kompakt bleibt — Klick klappt Vorschau + Checkliste auf.
+- **Slot-Mapper zeigt konkreten Profilnamen (Issue #57).** Jeder Slot zeigt nun das
+  zugeordnete Filament-Profil (z.B. „PolyTerra PLA — Polymaker") in den Dropdown-
+  Optionen und als Hover-Tooltip am Slot-Marker, statt nur des generischen Typs.
+  Fällt auf den generischen Typ zurück, wenn kein Profil gemappt ist.
+
+## [0.9.23] – 2026-06-16
+
+### Neu
+- **Druckdialog nach Upload automatisch öffnen.** Eine neue Einstellung
+  `print_start_dialog` (Einstellungen → Drucker → „Druckstart-Verhalten") steuert,
+  was nach einem Upload bei leerlaufendem Drucker passiert: „Print-Dialog" öffnet
+  den Slot-Zuordnungs-Dialog automatisch, „Print-Leiste" behält das bisherige
+  Banner. Basiert auf PR #56 von @gangoke.
+- **Auto-Leveling-Schalter pro Druck.** Der Druckdialog hat jetzt eine eigene
+  Auto-Leveling-Checkbox, die den globalen Standard für einen einzelnen Druck
+  überschreibt.
+
+### Behoben
+- **Objekt-Skip wurde beim Druckstart still ignoriert (PR #56, @gangoke).** Der
+  Skip-Befehl wurde gesendet, *bevor* der Drucker im `printing`-Status war, und
+  daher verworfen. Der Skip wird nun in einer Retry-Schleife erneut angewendet,
+  sobald der Druck bestätigt läuft — mit einer Pending-Sperre, damit die UI den
+  Skip-Status nicht vorzeitig zurücksetzt.
+- **Upload während eines laufenden Drucks überschrieb die Vorschau des laufenden
+  Auftrags.** Ein neuer Upload während des Drucks ersetzt nicht mehr Thumbnail /
+  file_ready des Auftrags auf dem Druckbett.
+
+## [0.9.22] – 2026-06-16
+
+### Neu
+- **Neu strukturiertes Einstellungs-Panel.** Das Einstellungs-Modal wurde durch
+  ein dauerhaftes Master-Detail-Panel mit fünf Kategorien ersetzt: Verbindung,
+  Drucker, Darstellung, Filament und System. Das Poll-Intervall ist nun live
+  einstellbar.
+- **Vendor-Sichtbarkeitsfilter (Issue #41).** Eine neue Checkliste in den
+  Filament-Einstellungen beschränkt das Slot-Profil-Dropdown auf bestimmte
+  Hersteller. „Generic" und eigene importierte Profile sind immer sichtbar.
+- **Idle-Datei-Aktionen in der Fortschritts-Karte (Issue #55).** Nach einem
+  Upload bei leerlaufendem Drucker erscheinen drei Schnellaktionen direkt in der
+  Fortschritts-Karte: ▶ Drucken, ⚙ Slots zuordnen und ✕ Leeren.
+
+### Behoben
+- **Mobileraker-Kompatibilität (Issue #48).** Absturz in `ConfigExtruder.fromJson`
+  (leeres `configfile.config`), Hänger beim Refresh (Metadata-Endlosschleife) und
+  fehlende ETA/Restzeit behoben.
+
+## [0.9.21] – 2026-06-14
+
+### Behoben
+- **Kamera-Stream auf Android (Chrome / Firefox) nicht sichtbar.** Android-Browser
+  unterstützen `multipart/x-mixed-replace` (MJPEG) nicht. Die UI erkennt Android
+  jetzt automatisch und fällt auf Snapshot-Polling mit 5 fps zurück
+  (`/api/camera/snapshot` alle 200 ms) — keine Server-Änderung nötig.
+
+### Geändert
+- Docker-Image auf **Debian 12 (Bookworm)** gepinnt (`python:3.11-slim-bookworm`),
+  um Kompatibilitätsprobleme mit glibc 2.41 zu vermeiden, die das aktuell von
+  `python:3.11-slim` gezogene Debian 13 Basis-Image mitbringt.
+- MQTT- und HTTP-Verbindungen erzwingen jetzt **IPv4** (`AF_INET`), um
+  Verbindungsfehler auf Hosts zu verhindern, bei denen der Drucker nur über IPv4
+  erreichbar ist, das OS aber IPv6 bevorzugt.
+- Extruder-Stub in der Moonraker-`configfile`-Antwort enthält jetzt `sensor_type`
+  und `filament_diameter` — behebt einen Mobileraker-Absturz
+  (`Null is not a subtype of Object`, Issue #48).
+
+## [0.9.20] – 2026-06-08
+
+### Neu
+- **Französische Sprachunterstützung (PR #45 von @Nathacks)**
+- **Z-Höhe in der Print-UI (PR #49 von @Nathacks).** Zeigt die aktuelle
+  Z-Position in mm unterhalb des Layer-Zählers.
+
+### Behoben
+- **Kamera-Autostart ignorierte das "Kamera bei Druckstart einschalten"-
+  Setting nach einem Bridge-Restart (Issue #50).** Das Setting wurde in
+  der Prozessumgebung gecacht — nach dem Speichern in der UI überlebte
+  der alte Wert den Restart und der neue Wert aus `config.ini` wurde
+  nicht gelesen.
+- **Kamera startete nach manuellem Stopp während eines Drucks automatisch
+  neu (Issue #50).** Ein neues `_camera_user_stopped`-Flag unterdrückt
+  den Autostart für die aktuelle Drucksitzung. Es wird beim Druckende
+  zurückgesetzt.
+- **Falscher "Stream nicht verfügbar"-Fehler-Toast beim manuellen
+  Kamera-Stopp.** Der Bild-Fehler-Handler war noch registriert als
+  `img.src` geleert wurde.
+- **JS-Fehler (`ReferenceError: br is not defined`) beim Licht-Toggle.**
+  Variable wurde aus dem falschen Scope referenziert.
+- Webcam-URLs sind jetzt absolut, damit Mobileraker/Obico-Clients sie
+  erreichen können.
+
 ## [0.9.19.1] – 2026-06-04

 ### Behoben
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -1,24 +1,195 @@
 # Changelog

+## [0.9.26] – 2026-06-21
+
+### New
+- **Italian language support** (PR #66, @Alex_M). The bridge UI is now fully
+  available in Italian.
+
+### Fixed
+- **Camera always started at print begin** (issue #50). `camera_on_print` was
+  missing from the `/api/state` response — JavaScript read `undefined` and started
+  the camera regardless of the setting. Now correctly exposed in state.
+- **Auto-leveling setting ignored in Moonraker print path** (issue #57).
+  `handle_print_start` read the value only from bridge args, not from the request
+  body, so the dialog checkbox and the per-print override had no effect. Now
+  behaves identically to the direct print path.
+- **Filament mapping free-text fields replaced by dropdowns** (issue #57). A
+  mistyped vendor/name broke profile matching silently; fields are now dropdowns
+  (vendor → profile, vendor-filtered) so only valid combinations can be saved.
+- **Dashboard showed generic material type instead of profile name** (issue #57).
+  AMS slot cards now display the mapped profile name (e.g. "eSUN PLA-Basic")
+  instead of just "PLA". Falls back to the generic type when no profile is mapped.
+- **Ghost profile shown on empty slot** (issue #57). Stale mappings for empty
+  slots were still rendered; empty slots now correctly show "–".
+- **Skip-Objects panel missing in Orca upload flow** (issue #57). Panel now
+  appears in all print flows; on fresh upload the bridge requests `fileDetails`
+  from the printer and retries the object list for up to 6 s.
+- **Banner and dialog appeared simultaneously** (issue #57). Settings save now
+  resets the dialog cancel state so the slot mapper reliably opens after toggling
+  Start Print Behavior.
+- **"Clear" reloaded idle file on next poll** (issue #57). Clear now immediately
+  resets local state (`file_ready`, `filename`, `thumbnail`) and clears all dialog
+  locks — the preview and action buttons disappear instantly and do not return.
+- **Material matching for "PLA Silk", "Matte PLA" etc.** (PR #64, @p2l).
+  Modifier+base patterns in any word order are now normalised to the base type;
+  dash-suffix variants (PLA-CF) remain correctly incompatible with their base.
+
+## [0.9.25] – 2026-06-17
+
+### Fixed
+- **Random crashes / container restarts — segfault in `libcrypto.so.3` (issue #53).**
+  The MQTT-over-TLS client shared a single SSL socket between the reader thread
+  (`recv`) and the sender threads (`sendall`) without serializing them. CPython's
+  `ssl` module does not allow concurrent read and write on the same socket — the
+  overlap corrupted OpenSSL's internal state, causing a heap corruption and a
+  segfault that manifested reliably on some hosts (timing-dependent). All socket
+  access (recv / sendall / close / reconnect) is now serialized under a single
+  lock; the reader probes readiness with `select()` outside the lock so senders
+  are never starved. Reconnect and disconnect now swap the socket atomically.
+  Thanks to @BasK for the detailed fault-handler trace that pinpointed this.
+- **File browser accepted non-GCode uploads (issue #59).** Drag & drop bypassed
+  the file picker's `accept` filter, so e.g. a JPG could be uploaded. Uploads are
+  now validated both client- and server-side; only `.gcode`, `.gcode.3mf`, `.3mf`
+  and `.bgcode` are accepted. Thanks @gangoke.
+
+## [0.9.24] – 2026-06-16
+
+### New
+- **Skip Objects available in every print flow (issue #57).** The "Skip objects"
+  panel in the Slot Mapper used to appear only when printing from the Browser tab.
+  It now shows in all flows (upload / print bar included), collapsed by default
+  behind a `✂ Skip objects (N)` header to keep the dialog compact, expanding on
+  click with the object preview and checklist.
+- **Slot Mapper shows the specific profile name (issue #57).** Each slot now
+  displays its mapped filament profile (e.g. "PolyTerra PLA — Polymaker") in the
+  dropdown options and as a hover tooltip on the slot marker, instead of just the
+  generic type. Falls back to the generic type when no profile is mapped.
+
+## [0.9.23] – 2026-06-16
+
+### New
+- **Auto-open print dialog after upload.** A new `print_start_dialog` setting
+  (Settings → Printer → "Start Print Behavior") controls what happens after a
+  file is uploaded while the printer is idle: `Print Dialog` opens the
+  slot-assignment dialog automatically, `Print Bar` keeps the previous banner
+  behaviour. Based on PR #56 by @gangoke.
+- **Per-print auto-leveling toggle.** The print dialog now has its own
+  auto-leveling checkbox that overrides the global default for a single print.
+
+### Fixed
+- **Object skip was silently ignored at print start (PR #56, @gangoke).** The
+  skip command was sent *before* the printer entered the `printing` state, so it
+  was dropped. The skip is now re-applied in a retry loop once the print is
+  confirmed running, with a pending-lock so the UI doesn't reset the skip state
+  prematurely.
+- **Upload during an active print overwrote the running job's preview.**
+  Uploading a new file while printing no longer replaces the thumbnail /
+  file_ready of the job currently on the bed.
+
+## [0.9.22] – 2026-06-16
+
+### New
+- **Restructured Settings panel.** The settings modal has been replaced by a
+  persistent Master-Detail panel with five categories: Connection, Printer,
+  Appearance, Filament, and System. Poll interval is now adjustable live.
+- **Vendor visibility filter (issue #41).** A new checklist in the Filament
+  settings lets you restrict the slot profile dropdown to specific manufacturers.
+  "Generic" and your own imported profiles are always visible. The list updates
+  automatically after a profile import.
+- **Idle file actions in the progress card (issue #55).** After uploading a file
+  while the printer is idle, three quick-action buttons appear directly in the
+  progress card: ▶ Print, ⚙ Map Slots, and ✕ Clear — matching the file browser
+  workflow without navigating away.
+
+### Fixed
+- **Mobileraker: app crashed with `Null is not a subtype of Object` in
+  `ConfigExtruder.fromJson` (issue #48).** `configfile.config` was returned as
+  an empty object `{}`. Mobileraker parses both `configfile.settings` and
+  `configfile.config` through the same strict Dart parser — both are now
+  populated with the same extruder/bed/stepper stub.
+- **Mobileraker: app hung indefinitely on refresh (issue #48).** The WebSocket
+  `server.files.metadata` handler called a non-existent store method
+  (`get_file_by_filename`), always returning empty metadata. Mobileraker retried
+  this thousands of times per second. Both the HTTP and WS paths now share a
+  single `_build_file_metadata()` method.
+- **Mobileraker: ETA / remaining time not shown (issue #48).** A side effect of
+  the metadata loop fix — once `currentFile` resolves, Mobileraker can calculate
+  ETA from `estimated_time`.
+- **Mobileraker: `notify_status_update` triggered repeated `ConfigFile.parse`
+  (issue #48).** Static objects (`configfile`, `webhooks`, `heaters`, `history`)
+  were included in every live status push. They are now filtered out; only live
+  telemetry is broadcast.
+- `motion_report` (`live_position`, `live_velocity`) added to printer objects
+  for Mobileraker motion display.
+- Saving filament slot profiles no longer silently drops the `visible_vendors`
+  setting from `config.ini`.
+
+## [0.9.21] – 2026-06-14
+
+### Fixed
+- **Camera stream not visible on Android (Chrome / Firefox).** Android
+  browsers do not support `multipart/x-mixed-replace` (MJPEG). The UI
+  now detects Android and falls back to snapshot-polling at 5 fps
+  (`/api/camera/snapshot` every 200 ms) — no server-side change needed.
+
+### Changed
+- Docker image now pinned to **Debian 12 (Bookworm)** (`python:3.11-slim-bookworm`)
+  to avoid glibc 2.41 compatibility issues introduced by the Debian 13
+  base image that `python:3.11-slim` recently started pulling.
+- MQTT and HTTP connections now **force IPv4** (`AF_INET`) to prevent
+  connection failures on hosts where the printer is only reachable via
+  IPv4 but the OS prefers IPv6.
+- Extruder stub in the Moonraker `configfile` response now includes
+  `sensor_type` and `filament_diameter` — fixes a Mobileraker crash
+  (`Null is not a subtype of Object`, issue #48).
+
+## [0.9.20] – 2026-06-08
+
+### New
+- **French language support (PR #45 by @Nathacks)**
+- **Z height display in the print UI (PR #49 by @Nathacks).** Shows
+  current Z position in mm below the layer counter.
+
+### Fixed
+- **Camera auto-start ignored "Enable camera on print start" setting
+  after a bridge restart (issue #50).** The setting was cached in the
+  process environment — after saving it in the UI, the old value
+  survived the restart and the new value from `config.ini` was never
+  read.
+- **Camera restarted automatically after manual stop during a print
+  (issue #50).** A new `_camera_user_stopped` flag suppresses
+  auto-restart for the current print session. It resets when the
+  print ends.
+- **Spurious "stream unavailable" error toast when stopping the camera
+  manually.** The image error handler was still registered when
+  `img.src` was cleared.
+- **JS error (`ReferenceError: br is not defined`) when toggling the
+  light.** Variable was referenced from the wrong scope.
+- Webcam URLs are now absolute so that Mobileraker/Obico clients can
+  reach them.
+
 ## [0.9.19.1] – 2026-06-04

 ### Fixed
- Standalone-Binaries (Linux/Windows) zeigten `vunknown` als Version.
-  Die `VERSION`-Datei ist jetzt ins PyInstaller-Onefile eingebettet.
- Bei fehlenden TLS-Zertifikaten (`anycubic_slicer.crt`/`.key`) gab
-  es nur den rohen Fehler `[Errno 2] No such file or directory`. Die
-  Bridge meldet jetzt klar, wo die Dateien hingelegt werden müssen
-  und dass `anycubic-certs.zip` aus dem Gitea-Release stammt.
+- Standalone binaries (Linux/Windows) reported `vunknown` as their
+  version. The `VERSION` file is now embedded into the PyInstaller
+  onefile bundle.
+- When the TLS certificates (`anycubic_slicer.crt`/`.key`) were
+  missing, the bridge only logged the raw `[Errno 2] No such file
+  or directory`. It now states clearly where the files need to be
+  placed and that `anycubic-certs.zip` from the Gitea release is the
+  source.

 ### Changed
- Filament-Profil-Liste neu kuratiert: 209 statt 399 Einträge.
-  Profile die nur für drucker-spezifische Vendor-Bundles existieren
-  (z.B. Eryone Thinker X400, Artillery M1 Pro, WonderMaker ZR,
-  Tiertime, Cubicon, CoLiDo, Afinia, Snapmaker) sind rausgeflogen
-  — OrcaSlicer hätte sie im Standard-Kobra-X-Setup beim Sync
-  ohnehin nicht gefunden, weil die jeweiligen Vendor-Bundles nur
-  bei aktivem Drucker-Vendor geladen werden. Für solche Filamente
-  bleibt der Custom-Profile-Import (Issue #41) der Weg.
+- Filament profile list re-curated: 209 entries instead of 399.
+  Profiles that only exist inside printer-specific vendor bundles
+  (e.g. Eryone Thinker X400, Artillery M1 Pro, WonderMaker ZR,
+  Tiertime, Cubicon, CoLiDo, Afinia, Snapmaker) were dropped —
+  OrcaSlicer wouldn't have found them in a default Kobra X setup
+  anyway, because the matching vendor bundle is only loaded when
+  the corresponding printer vendor is active. For those filaments
+  the custom profile import (issue #41) remains the way.

 ## [0.9.19] – 2026-06-02

--- a/CONTRIBUTING.md
+++ b/CONTRIBUTING.md
@@ -0,0 +1,102 @@
+# Contributing to KX-Bridge
+
+Thanks for taking the time to contribute! Here's everything you need to know.
+
+---
+
+## How to report a bug or request a feature
+
+Use the issue tracker:
+
+- **Bug:** [New Bug Report](https://gitea.it-drui.de/viewit/KX-Bridge-Release/issues/new?template=bug_report.md)
+- **Feature:** [New Feature Request](https://gitea.it-drui.de/viewit/KX-Bridge-Release/issues/new?template=feature_request.md)
+
+Please fill in the template — especially the **KX-Bridge version** and **logs**.  
+Issues without version info are hard to debug.
+
+---
+
+## How to submit a Pull Request
+
+### 1. Fork the repository
+
+Click **Fork** at the top of this page.  
+You now have your own copy at `gitea.it-drui.de/your-username/KX-Bridge-Release`.
+
+### 2. Clone your fork
+
+```bash
+git clone https://gitea.it-drui.de/your-username/KX-Bridge-Release.git
+cd KX-Bridge-Release
+```
+
+### 3. Create a branch
+
+Always branch off `nightly`:
+
+```bash
+git checkout nightly
+git checkout -b feature/my-feature   # or fix/my-fix
+```
+
+### 4. Make your changes
+
+- Test your changes locally with Docker:
+  ```bash
+  docker build -t kx-bridge:dev .
+  docker run -p 7125:7125 -v ./config:/app/config kx-bridge:dev
+  ```
+- No debug `print()` statements — use `logging`
+- Keep commits focused; one thing per commit
+
+### 5. Push and open a PR
+
+```bash
+git push origin feature/my-feature
+```
+
+Gitea will show a banner — click **"Create Pull Request"**.  
+The PR template will be pre-filled. Set the target branch to **`nightly`**.
+
+---
+
+## Branch model
+
+```
+main      ← stable releases only (merged by maintainer)
+nightly   ← integration branch — PRs go here
+feature/* ← your feature branch (in your fork)
+fix/*     ← your bugfix branch (in your fork)
+```
+
+Your PR always targets `nightly`. The maintainer periodically merges `nightly → main` for a new stable release.
+
+---
+
+## Commit style
+
+Use conventional commit prefixes:
+
+| Prefix | When |
+|---|---|
+| `feat:` | new feature |
+| `fix:` | bug fix |
+| `docs:` | documentation only |
+| `chore:` | maintenance, dependencies |
+| `refactor:` | code change without new feature or fix |
+
+Example: `fix: prevent crash when printer is offline during startup`
+
+---
+
+## Language
+
+- **Code and comments:** English
+- **Issue comments:** match the language of the issue (if someone writes in German, reply in German)
+- **Commit messages:** English
+
+---
+
+## Questions?
+
+Open a [Discussion](https://gitea.it-drui.de/viewit/KX-Bridge-Release/issues) or leave a comment on the relevant issue.
--- a/4
+++ b/4
@@ -1,7 +1,9 @@
-FROM python:3.11-slim
+FROM python:3.11-slim-bookworm

 WORKDIR /app

+RUN apt-get update && apt-get install -y --no-install-recommends ffmpeg && rm -rf /var/lib/apt/lists/*
+
 COPY requirements.txt .
 RUN pip install --no-cache-dir -r requirements.txt

--- a/README.de.md
+++ b/README.de.md
@@ -15,6 +15,15 @@ Feedback willkommen.</sub>

 <sub>🇬🇧 <a href="README.md">English version</a>  ·  🇪🇸 <a href="README.es.md">Versión española</a></sub>

+</div>
+
+> [!CAUTION]
+> **Laufende Wartungsarbeiten diese Woche** — Wir strukturieren das Repository um (Branch-Modell, CI-Workflows, Contribution-Prozess). Es kann zu Änderungen bei Branch-Namen, PR-Templates und der Art wie Releases veröffentlicht werden kommen. Wir entschuldigen uns für etwaige Unannehmlichkeiten. Handling, Workflow und die langfristige Wartbarkeit werden sich dadurch deutlich verbessern.
+>
+> 👉 Möchtest du beitragen? Bitte lies zuerst [CONTRIBUTING.md](CONTRIBUTING.md).
+
+<div align="center">
+
 <br>

 [![Ko-fi](https://img.shields.io/badge/Ko--fi-Support%20this%20project-FF5E5B?style=for-the-badge&logo=ko-fi&logoColor=white)](https://ko-fi.com/viewitde)
@@ -103,13 +112,6 @@ Drucker → Verbindungstyp **Moonraker** → Host: `http://BRIDGE-IP:7125`
 > ⚠️ Verbindungstyp muss **Moonraker** sein (nicht „Bambu" oder „Klipper").
 > Vollständige URL inkl. `http://` und Port `:7125` im Host-Feld eintragen.

---
-
-## 📺 Video-Tutorial
-
-[![KX-Bridge Setup & Usage](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
-
---

 ## 🎨 Empfohlener Slicer

--- a/README.es.md
+++ b/README.es.md
@@ -14,6 +14,15 @@ ninguna está oficialmente probada ni soportada. Se agradece el feedback.</sub>

 <sub>🇬🇧 <a href="README.md">English version</a>  ·  🇩🇪 <a href="README.de.md">Deutsche Version</a></sub>

+</div>
+
+> [!CAUTION]
+> **Trabajos de mantenimiento en curso esta semana** — Estamos reestructurando el repositorio (modelo de ramas, flujos CI, proceso de contribución). Es posible que notes cambios en los nombres de ramas, plantillas de PR y la forma en que se publican las versiones. Pedimos disculpas por los inconvenientes. El manejo, el flujo de trabajo y la mantenibilidad a largo plazo mejorarán significativamente como resultado.
+>
+> 👉 ¿Quieres contribuir? Por favor lee primero [CONTRIBUTING.md](CONTRIBUTING.md).
+
+<div align="center">
+
 <br>

 [![Ko-fi](https://img.shields.io/badge/Ko--fi-Apoya%20este%20proyecto-FF5E5B?style=for-the-badge&logo=ko-fi&logoColor=white)](https://ko-fi.com/viewitde)
@@ -66,17 +75,43 @@ docker compose up -d

 **Binario Linux (sin Docker):**
 ```bash
-chmod +x kx-bridge && ./kx-bridge
+chmod +x kx-bridge-linux-amd64 && ./kx-bridge-linux-amd64
 ```

 **EXE Windows (sin Docker):**
 ```
 kx-bridge.exe
 ```
-> `config\` y `data\` se crean junto al EXE — instalación portátil.

-> Con los binarios de Linux y Windows, `config/` y `data/` (configuración, SQLite, almacén de GCode)
-> viven junto al programa. Copia toda la carpeta para mover la instalación.
+> ⚠️ **Certificados TLS necesarios para el binario standalone**
+>
+> El bridge habla con el MQTT de la impresora vía mTLS y necesita dos
+> ficheros de certificado **junto al binario**:
+>
+> - `anycubic_slicer.crt`
+> - `anycubic_slicer.key`
+>
+> Ambos vienen en **`anycubic-certs.zip`** en la misma página de release.
+> Descárgalo y extrae los dos ficheros en el mismo directorio que
+> `kx-bridge-linux-amd64` o `kx-bridge.exe`. Sin ellos verás
+> `Verbindung fehlgeschlagen: TLS-Zertifikate fehlen …` (0.9.19.1+) o
+> `[Errno 2] No such file or directory` (versiones anteriores).
+>
+> Estructura correcta:
+> ```
+> ~/kx-bridge/
+> ├── kx-bridge-linux-amd64   (o kx-bridge.exe)
+> ├── anycubic_slicer.crt     ← de anycubic-certs.zip
+> ├── anycubic_slicer.key     ← de anycubic-certs.zip
+> └── config/                 (se crea en el primer arranque)
+> ```
+>
+> Los usuarios de Docker no necesitan hacer esto — los certificados
+> están incluidos en la imagen.
+
+> Con los binarios de Linux y Windows, `config/` y `data/` (configuración,
+> SQLite, almacén de GCode) viven junto al programa. Copia toda la carpeta
+> para mover la instalación.

 **Python directamente:**
 ```bash
@@ -104,11 +139,6 @@ Impresora → Tipo de conexión **Moonraker** → Host: `http://IP-DEL-PUENTE:71

 ---

-## 📺 Vídeo tutorial
-
-[![Configuración y uso de KX-Bridge](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
-
---

 ## 🎨 Slicer recomendado

--- a/README.md
+++ b/README.md
@@ -14,6 +14,15 @@ officially tested or supported. Feedback welcome.</sub>

 <sub>🇩🇪 <a href="README.de.md">Deutsche Version</a>  ·  🇪🇸 <a href="README.es.md">Versión española</a></sub>

+</div>
+
+> [!CAUTION]
+> **Ongoing maintenance work this week** — We are restructuring the repository (branch model, CI workflows, contribution process). You may notice changes to branch names, PR templates, and how releases are published. We apologise for any inconvenience. Handling, workflow, and long-term maintainability will be significantly improved as a result.
+>
+> 👉 Want to contribute? Please read [CONTRIBUTING.md](CONTRIBUTING.md) first.
+
+<div align="center">
+
 <br>

 [![Ko-fi](https://img.shields.io/badge/Ko--fi-Support%20this%20project-FF5E5B?style=for-the-badge&logo=ko-fi&logoColor=white)](https://ko-fi.com/viewitde)
@@ -102,13 +111,7 @@ Printer → Connection type **Moonraker** → Host: `http://BRIDGE-IP:7125`
 > ⚠️ Connection type must be **Moonraker** (not "Bambu" or "Klipper").
 > Enter the full URL including `http://` and port `:7125` in the host field.

---

-## 📺 Video Tutorial
-
-[![KX-Bridge Setup & Usage](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
-
---

 ## 🎨 Recommended Slicer

--- a/2
+++ b/2
@@ -1 +1 @@
-0.9.19.1
+0.9.27-nightly1
--- a/agents.md
+++ b/agents.md
@@ -0,0 +1,31 @@
+# KX-Bridge Claude Agents
+
+## Available Agents
+
+| Agent | File | When to use |
+|---|---|---|
+| Reviewer | `.claude/agents/reviewer.md` | Before every PR — checks logic, error handling, Moonraker compatibility |
+| Changelog | `.claude/agents/changelog.md` | After merge to nightly — generates CHANGELOG.md entry from commits |
+| Test Writer | `.claude/agents/test-writer.md` | When adding new functions — derives pytest tests |
+| Nightly Prep | `.claude/agents/nightly-prep.md` | Before a release — checks readiness of nightly → main merge |
+| Docker Check | `.claude/agents/docker-check.md` | Before image push — validates Dockerfile and compose config |
+| Moonraker Debug | `.claude/agents/moonraker-debug.md` | On runtime errors — analyzes Moonraker/Klipper logs |
+
+## Usage
+
+In VS Code with Claude Code extension:
+```
+@reviewer     → code review of current changes
+@changelog    → generate CHANGELOG entry
+@test-writer  → write tests for changed files
+@nightly-prep → check release readiness
+@docker-check → validate Docker config
+@moonraker-debug → analyze logs
+```
+
+## Context
+
+- Moonraker API: Port 7125
+- AFC lane_data: flat indexing lane1–lane4
+- Registry: `gitea.it-drui.de/viewit/kx-bridge`
+- Default PR target: `nightly`
--- a/config_loader.py
+++ b/config_loader.py
@@ -13,6 +13,7 @@ _BASE = pathlib.Path(sys.executable).parent if getattr(sys, "frozen", False) els
 CONFIG_SECTION_CONNECTION = "connection"
 CONFIG_SECTION_PRINT      = "print"
 CONFIG_SECTION_BRIDGE     = "bridge"
+CONFIG_SECTION_SPOOLMAN   = "spoolman"


 def _find_config_file() -> pathlib.Path | None:
@@ -61,7 +62,10 @@ def _load_config_file(path: pathlib.Path):
        "AUTO_LEVELING":        (CONFIG_SECTION_PRINT,   "auto_leveling"),
        "CAMERA_ON_PRINT":      (CONFIG_SECTION_PRINT,   "camera_on_print"),
        "WEB_UPLOAD_WARNING":   (CONFIG_SECTION_PRINT,   "web_upload_warning"),
+        "PRINT_START_DIALOG":   (CONFIG_SECTION_PRINT,   "print_start_dialog"),
        "BRIDGE_PRINTER_NAME":  (CONFIG_SECTION_BRIDGE,  "printer_name"),
+        "SPOOLMAN_SERVER":      (CONFIG_SECTION_SPOOLMAN, "server"),
+        "SPOOLMAN_SYNC_RATE":   (CONFIG_SECTION_SPOOLMAN, "sync_rate"),
    }
    for env_key, (section, option) in mapping.items():
        if env_key not in os.environ:
@@ -73,6 +77,18 @@ def _load_config_file(path: pathlib.Path):
                pass


+    # Backward compatibility: old key FILE_READY_DIALOG → PRINT_START_DIALOG
+    if "PRINT_START_DIALOG" not in os.environ:
+        try:
+            legacy = cfg.get(CONFIG_SECTION_PRINT, "file_ready_dialog")
+            if legacy:
+                os.environ["PRINT_START_DIALOG"] = legacy
+        except (configparser.NoSectionError, configparser.NoOptionError):
+            pass
+    if "PRINT_START_DIALOG" not in os.environ and "FILE_READY_DIALOG" in os.environ:
+        os.environ["PRINT_START_DIALOG"] = os.environ["FILE_READY_DIALOG"]
+
+
 def migrate_env_to_config(env_path: pathlib.Path, config_path: pathlib.Path):
    """Einmalige Migration: .env → config.ini anlegen."""
    env_vals: dict[str, str] = {}
@@ -227,10 +243,17 @@ def save_filament_profiles(profiles: dict[int, dict]) -> bool:
        return False
    cfg = configparser.ConfigParser()
    cfg.read(path, encoding="utf-8")
+    # visible_vendors (Issue #41) ist kein Slot-Mapping — beim Ersetzen der
+    # Sektion erhalten, sonst geht der Vendor-Filter beim Slot-Save verloren.
+    preserved_vendors = None
+    if cfg.has_option("filament_profiles", "visible_vendors"):
+        preserved_vendors = cfg.get("filament_profiles", "visible_vendors")
    if cfg.has_section("filament_profiles"):
        cfg.remove_section("filament_profiles")
-    if profiles:
+    if profiles or preserved_vendors:
        cfg["filament_profiles"] = {}
+        if preserved_vendors:
+            cfg["filament_profiles"]["visible_vendors"] = preserved_vendors
        for slot_idx in sorted(profiles.keys()):
            entry = profiles[slot_idx] or {}
            if entry.get("vendor"):
@@ -244,6 +267,43 @@ def save_filament_profiles(profiles: dict[int, dict]) -> bool:
    return True


+def list_visible_vendors() -> list[str]:
+    """Liest [filament_profiles] visible_vendors (komma-separiert) aus config.ini.
+
+    Vendor-Sichtbarkeitsfilter für das Slot-Profil-Dropdown (Issue #41 Option A).
+    Leere Liste = keine Einschränkung (rückwärtskompatibel: alle Vendoren).
+    """
+    path = _find_config_file()
+    if not path:
+        return []
+    cfg = configparser.ConfigParser()
+    cfg.read(path, encoding="utf-8")
+    if not cfg.has_option("filament_profiles", "visible_vendors"):
+        return []
+    raw = cfg.get("filament_profiles", "visible_vendors")
+    return [v.strip() for v in raw.split(",") if v.strip()]
+
+
+def save_visible_vendors(vendors: list[str]) -> bool:
+    """Schreibt visible_vendors in [filament_profiles], ohne die Slot-Mappings
+    (slot_N_*) zu verlieren. Leere Liste entfernt den Key wieder."""
+    path = _find_config_file()
+    if not path:
+        return False
+    cfg = configparser.ConfigParser()
+    cfg.read(path, encoding="utf-8")
+    if not cfg.has_section("filament_profiles"):
+        cfg.add_section("filament_profiles")
+    clean = [v.strip() for v in (vendors or []) if v and v.strip()]
+    if clean:
+        cfg["filament_profiles"]["visible_vendors"] = ", ".join(clean)
+    elif cfg.has_option("filament_profiles", "visible_vendors"):
+        cfg.remove_option("filament_profiles", "visible_vendors")
+    with open(path, "w", encoding="utf-8") as f:
+        cfg.write(f)
+    return True
+
+
 def get(key: str, default: str = "") -> str:
    return os.environ.get(key, default)

@@ -259,3 +319,6 @@ DEFAULT_AMS_SLOT = get("DEFAULT_AMS_SLOT", "auto")
 AUTO_LEVELING    = int(get("AUTO_LEVELING","1"))
 CAMERA_ON_PRINT  = int(get("CAMERA_ON_PRINT","0"))
 WEB_UPLOAD_WARNING = int(get("WEB_UPLOAD_WARNING", "1"))
+PRINT_START_DIALOG = int(get("PRINT_START_DIALOG", get("FILE_READY_DIALOG", "1")))
+SPOOLMAN_SERVER    = get("SPOOLMAN_SERVER",    "")
+SPOOLMAN_SYNC_RATE = int(get("SPOOLMAN_SYNC_RATE", "0"))
--- a/docker-compose-KX.yml
+++ b/docker-compose-KX.yml
@@ -0,0 +1,210 @@
+# KobraX Full Stack — KX-Bridge + Obico Self-Hosted + Spoolman
+#
+# Für Portainer: Stack → Add Stack → Upload → diese Datei wählen
+#
+# Voraussetzung: Obico-Images einmalig in Gitea-Registry pushen:
+#   docker tag obico-server-web:latest    gitea.it-drui.de/viewit/obico-web:latest
+#   docker tag obico-server-ml_api:latest gitea.it-drui.de/viewit/obico-ml:latest
+#   docker tag obico-server-tasks:latest  gitea.it-drui.de/viewit/obico-tasks:latest
+#   docker push gitea.it-drui.de/viewit/obico-web:latest
+#   docker push gitea.it-drui.de/viewit/obico-ml:latest
+#   docker push gitea.it-drui.de/viewit/obico-tasks:latest
+#
+# Persistente Daten: /mnt/dockerdata/KobraXStack/<service>/
+#
+# Ports:
+#   7125  — KX-Bridge  (Moonraker-API)
+#   3334  — Obico      (Web-UI)
+#   7912  — Spoolman   (Web-UI)
+#
+# Obico Admin-Account nach dem ersten Start:
+#   docker exec obico-web python manage.py createsuperuser
+
+x-obico-base: &obico-base
+  restart: unless-stopped
+  volumes:
+    - /mnt/dockerdata/KobraXStack/obico/data:/data
+    - /mnt/dockerdata/KobraXStack/obico/frontend:/frontend
+  depends_on:
+    - obico-redis
+  environment:
+    DEBUG: "False"
+    REDIS_URL: "redis://obico-redis:6379"
+    DATABASE_URL: "sqlite:////data/db.sqlite3"
+    INTERNAL_MEDIA_HOST: "http://obico-web:3334"
+    ML_API_HOST: "http://obico-ml:3333"
+    ACCOUNT_ALLOW_SIGN_UP: "False"
+    SITE_USES_HTTPS: "False"
+    SITE_IS_PUBLIC: "False"
+    DJANGO_SECRET_KEY: "change-me-to-a-random-secret-key-before-use"
+    WEBPACK_LOADER_ENABLED: "False"
+  networks:
+    - kobrax-stack
+
+services:
+
+  # ── KX-Bridge ───────────────────────────────────────────────
+  kx-bridge:
+    image: gitea.it-drui.de/viewit/kx-bridge:latest
+    container_name: kx-bridge
+    restart: unless-stopped
+    ports:
+      - "7125:7125"
+    volumes:
+      - /mnt/dockerdata/KobraXStack/kx-bridge/config:/app/config
+      - /mnt/dockerdata/KobraXStack/kx-bridge/data:/app/data
+    networks:
+      - kobrax-stack
+    logging:
+      driver: json-file
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+  # ── Spoolman ────────────────────────────────────────────────
+  spoolman:
+    image: ghcr.io/donkie/spoolman:latest
+    container_name: spoolman
+    restart: unless-stopped
+    ports:
+      - "7912:8000"
+    volumes:
+      - /mnt/dockerdata/KobraXStack/spoolman:/home/app/.local/share/spoolman
+    networks:
+      - kobrax-stack
+    logging:
+      driver: json-file
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+  # ── Obico Redis ─────────────────────────────────────────────
+  obico-redis:
+    image: redis:7.2-alpine
+    container_name: obico-redis
+    restart: unless-stopped
+    volumes:
+      - /mnt/dockerdata/KobraXStack/obico/redis:/data
+    networks:
+      - kobrax-stack
+    healthcheck:
+      test: ["CMD", "redis-cli", "ping"]
+      start_period: 10s
+      interval: 15s
+      timeout: 5s
+      retries: 10
+    logging:
+      driver: json-file
+      options:
+        max-size: "5m"
+        max-file: "2"
+
+  # ── Obico ML API ────────────────────────────────────────────
+  obico-ml:
+    image: gitea.it-drui.de/viewit/obico-ml:latest
+    container_name: obico-ml
+    restart: unless-stopped
+    command: bash -c "gunicorn --bind 0.0.0.0:3333 --workers 1 wsgi"
+    working_dir: /app
+    environment:
+      DEBUG: "False"
+      FLASK_APP: "server.py"
+    networks:
+      - kobrax-stack
+    healthcheck:
+      test: ["CMD-SHELL", "wget -q --spider http://127.0.0.1:3333/hc/ || exit 1"]
+      start_period: 30s
+      interval: 30s
+      timeout: 10s
+      retries: 3
+    logging:
+      driver: json-file
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+  # ── Obico Web ───────────────────────────────────────────────
+  obico-web:
+    <<: *obico-base
+    image: gitea.it-drui.de/viewit/obico-web:latest
+    container_name: obico-web
+    ports:
+      - "3334:3334"
+    depends_on:
+      - obico-ml
+      - obico-redis
+    command: >
+      sh -c 'python manage.py migrate &&
+             python manage.py shell -c "from django.contrib.sites.models import Site; s=Site.objects.first(); s.domain=\"192.168.178.204:3334\"; s.name=\"Obico\"; s.save()" &&
+             python manage.py collectstatic --noinput &&
+             daphne -b 0.0.0.0 -p 3334 config.routing:application'
+    healthcheck:
+      test: ["CMD-SHELL", "wget -q --spider http://127.0.0.1:3334/hc/ || exit 1"]
+      start_period: 60s
+      interval: 90s
+      timeout: 20s
+      retries: 3
+    logging:
+      driver: json-file
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+  # ── Obico Tasks (Celery) ────────────────────────────────────
+  obico-tasks:
+    <<: *obico-base
+    image: gitea.it-drui.de/viewit/obico-tasks:latest
+    container_name: obico-tasks
+    command: sh -c "celery -A config worker --beat -l info -c 2 -Q realtime,celery"
+    logging:
+      driver: json-file
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+  # ── moonraker-obico Plugin ──────────────────────────────────
+  # Verbindet KX-Bridge mit dem Obico-Server (Spaghetti-Detektion, Remote-UI)
+  # Voraussetzung: /mnt/dockerdata/KobraXStack/moonraker-obico/moonraker-obico.cfg
+  # muss existieren und einen gültigen auth_token enthalten.
+  #
+  # Token holen (nach erstem obico-web Start):
+  #   docker exec obico-web python manage.py shell -c "
+  #   from app.models import OneTimeVerificationCode, User
+  #   from django.utils import timezone; from datetime import timedelta; import random
+  #   u = User.objects.first()
+  #   c = OneTimeVerificationCode.objects.create(user=u, code='%06d' % random.randint(100000,999999), expired_at=timezone.now()+timedelta(hours=2))
+  #   print('CODE:', c.code)"
+  #   curl -X POST 'http://localhost:3334/api/v1/octo/verify/?code=<CODE>'
+  #   → printer.auth_token aus der Antwort in die cfg eintragen
+  moonraker-obico:
+    image: gitea.it-drui.de/viewit/moonraker-obico:latest
+    container_name: moonraker-obico
+    restart: unless-stopped
+    network_mode: host
+    volumes:
+      - /mnt/dockerdata/KobraXStack/moonraker-obico:/opt/printer_data/config
+      - /mnt/dockerdata/KobraXStack/moonraker-obico/logs:/opt/printer_data/logs
+    command: ["-c", "/opt/printer_data/config/moonraker-obico.cfg"]
+    logging:
+      driver: json-file
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+networks:
+  kobrax-stack:
+    driver: bridge
+
+# Verzeichnisse müssen auf dem Host existieren:
+# mkdir -p /mnt/dockerdata/KobraXStack/kx-bridge/config \
+#           /mnt/dockerdata/KobraXStack/kx-bridge/data \
+#           /mnt/dockerdata/KobraXStack/spoolman \
+#           /mnt/dockerdata/KobraXStack/obico/data \
+#           /mnt/dockerdata/KobraXStack/obico/frontend \
+#           /mnt/dockerdata/KobraXStack/obico/redis \
+#           /mnt/dockerdata/KobraXStack/moonraker-obico/logs
+# Spoolman benötigt UID/GID 1000:
+# sudo chown -R 1000:1000 /mnt/dockerdata/KobraXStack/spoolman
+#
+# moonraker-obico Config anlegen (auth_token nach Obico-Setup eintragen):
+# cp /path/to/moonraker-obico.cfg.example /mnt/dockerdata/KobraXStack/moonraker-obico/moonraker-obico.cfg
--- a/docker-compose.nightly.yml
+++ b/docker-compose.nightly.yml
@@ -0,0 +1,3 @@
+services:
+  kx-bridge:
+    image: gitea.it-drui.de/viewit/kx-bridge:nightly
--- a/docker-compose.portainer-nightly.yml
+++ b/docker-compose.portainer-nightly.yml
@@ -0,0 +1,25 @@
+# KX-Bridge Nightly — Portainer Stack
+#
+# Paste this into Portainer → Stacks → Add stack → Web editor
+#
+# Uses the nightly build — may be unstable, for testing new features early.
+# For production use, see docker-compose.portainer.yml (:latest).
+
+services:
+  kx-bridge:
+    image: gitea.it-drui.de/viewit/kx-bridge:nightly
+    volumes:
+      - /mnt/dockerdata/kx-nightly/config:/app/config
+      - /mnt/dockerdata/kx-nightly/data:/app/data
+    ports:
+      # Port 7125 = first printer. Add 7126, 7127, … for each additional printer.
+      - "7125:7125"
+    restart: unless-stopped
+    logging:
+      driver: json-file
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+# Verzeichnisse müssen auf dem Host existieren:
+# mkdir -p /mnt/dockerdata/kx-nightly/config /mnt/dockerdata/kx-nightly/data
--- a/docker-compose.portainer.yml
+++ b/docker-compose.portainer.yml
@@ -0,0 +1,29 @@
+# KX-Bridge — Portainer Stack
+#
+# Paste this into Portainer → Stacks → Add stack → Web editor
+#
+# No configuration needed upfront — just deploy, open http://HOST-IP:7125
+# and add your printer via the UI (IP only, credentials are fetched automatically).
+#
+# All data (config, GCode store, database) is stored in named Docker volumes
+# managed by Portainer.
+
+services:
+  kx-bridge:
+    image: gitea.it-drui.de/viewit/kx-bridge:latest
+    volumes:
+      - kx-bridge-config:/app/config
+      - kx-bridge-data:/app/data
+    ports:
+      # Port 7125 = first printer. Add 7126, 7127, … for each additional printer.
+      - "7125:7125"
+    restart: unless-stopped
+    logging:
+      driver: json-file
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+volumes:
+  kx-bridge-config:
+  kx-bridge-data:
--- a/docs/filament-preset-bridge-guide.md
+++ b/docs/filament-preset-bridge-guide.md
@@ -0,0 +1,344 @@
+# Eigene Filament-Presets anlegen, prüfen und mit KX-Bridge verknüpfen
+
+> **Gilt für:** OrcaSlicer-KX v2.4.0-alpha-kx2 oder neuer
+
+---
+
+## Was ist die `filament_id` und warum ist sie wichtig?
+
+Jedes Filament-Preset in OrcaSlicer hat eine interne `filament_id`. Diese ID wird von der KX-Bridge genutzt, um beim AMS-Sync das richtige Preset zuzuordnen.
+
+- System-Presets (z.B. "Polymaker PolyTerra PLA") haben eine feste ID wie `GFL99` oder `OGFL04`.
+- **Eigene (User-)Presets** bekommen in OrcaSlicer-KX automatisch eine eindeutige ID, die mit `P` beginnt (z.B. `P3a7f2c1`).
+
+Ohne eindeutige ID zeigt OrcaSlicer beim Sync immer "Generic PLA" — auch wenn das Preset existiert.
+
+---
+
+## 1. Eigenes Filament-Preset anlegen
+
+1. OrcaSlicer-KX starten
+2. Rechts oben im **Filament-Dropdown** ein passendes Basis-Preset wählen (z.B. "Generic PLA" oder ein Hersteller-Preset)
+3. Einstellungen nach Wunsch anpassen (Temperaturen, Kühlung, etc.)
+4. Auf das **Speichern-Symbol** (Diskette) klicken → **"Save as new preset"**
+5. Namen eingeben — z.B. `SUNLU PLA+ 2.0`
+   > Der Name muss später exakt so in der Bridge eingetragen werden.
+6. Drucker auswählen: **Anycubic Kobra X 0.4 nozzle** — wichtig für die Kompatibilität!
+7. **Speichern** klicken
+8. OrcaSlicer **einmal neu starten** — erst dann wird die `filament_id` dauerhaft gespeichert.
+
+---
+
+## 2. Eindeutige ID prüfen
+
+Nach dem Neustart prüfen, ob die ID korrekt gesetzt wurde:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+Die Datei öffnen und nach `filament_id` suchen:
+
+```json
+{
+  "filament_id": "P3a7f2c1",
+  ...
+}
+```
+
+✅ Korrekt: ID beginnt mit `P` gefolgt von 7 Hex-Zeichen  
+❌ Fehlt oder leer: OrcaSlicer-KX zu alt — Update auf v2.4.0-alpha-kx2 oder neuer
+
+---
+
+## 3. Preset auf einen anderen PC übertragen (Import)
+
+### Exportieren (Quell-PC)
+
+Die Preset-Datei einfach kopieren:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+### Importieren (Ziel-PC)
+
+**Methode A — Datei direkt kopieren:**
+1. Die `.json`-Datei in das gleiche Verzeichnis auf dem Ziel-PC kopieren
+2. OrcaSlicer neu starten → Preset erscheint im Dropdown
+
+**Methode B — OrcaSlicer Import-Funktion:**
+1. In OrcaSlicer: **File → Import → Import Configs...**
+2. Die `.json`-Datei auswählen
+3. OrcaSlicer neu starten
+
+> **Wichtig:** Die `filament_id` in der Datei bleibt erhalten — das Preset wird auf dem Ziel-PC genauso erkannt wie auf dem Quell-PC.
+
+---
+
+## 4. Preset in KX-Bridge verknüpfen
+
+1. KX-Bridge UI öffnen
+2. **Filament-Verwaltung** → AMS-Slot auswählen
+3. Im Feld **Filament-Name** exakt den OrcaSlicer-Preset-Namen eintragen:
+   ```
+   SUNLU PLA+ 2.0
+   ```
+4. Speichern
+
+Die Bridge sendet beim Sync `filament_name: "SUNLU PLA+ 2.0"` → OrcaSlicer findet das Preset anhand von Name und `filament_id` → zeigt es korrekt an.
+
+---
+
+## Wichtige Hinweise
+
+| Was | Warum |
+|-----|-------|
+| Name in OrcaSlicer und Bridge müssen **exakt** übereinstimmen | Groß-/Kleinschreibung und Sonderzeichen werden verglichen |
+| Preset muss für **Anycubic Kobra X 0.4 nozzle** kompatibel sein | Beim Speichern den richtigen Drucker auswählen |
+| Nach dem ersten Speichern OrcaSlicer **neu starten** | Erst dann wird die `filament_id` persistent geschrieben |
+| **OrcaSlicer-KX v2.4.0-alpha-kx2** oder neuer verwenden | Ältere Versionen generieren keine eindeutige `filament_id` für User-Presets |
+
+---
+---
+
+# How to Create, Verify and Import Custom Filament Presets for KX-Bridge
+
+> **Requires:** OrcaSlicer-KX v2.4.0-alpha-kx2 or newer
+
+---
+
+## What is the `filament_id` and why does it matter?
+
+Every filament preset in OrcaSlicer has an internal `filament_id`. The KX-Bridge uses this ID to match the correct preset during AMS sync.
+
+- System presets (e.g. "Polymaker PolyTerra PLA") have a fixed ID like `GFL99` or `OGFL04`.
+- **Custom (user) presets** automatically receive a unique ID starting with `P` (e.g. `P3a7f2c1`) in OrcaSlicer-KX.
+
+Without a unique ID, OrcaSlicer will always show "Generic PLA" during sync — even if the preset exists.
+
+---
+
+## 1. Create a Custom Filament Preset
+
+1. Launch OrcaSlicer-KX
+2. Select a suitable base preset from the **filament dropdown** (e.g. "Generic PLA" or a vendor preset)
+3. Adjust settings as needed (temperatures, cooling, etc.)
+4. Click the **save icon** (floppy disk) → **"Save as new preset"**
+5. Enter a name — e.g. `SUNLU PLA+ 2.0`
+   > This name must be entered in the bridge exactly as typed here.
+6. Select printer: **Anycubic Kobra X 0.4 nozzle** — required for compatibility!
+7. Click **Save**
+8. **Restart OrcaSlicer once** — the `filament_id` is only written permanently after a restart.
+
+---
+
+## 2. Verify the Unique ID
+
+After restarting, check that the ID was set correctly:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+Open the file and look for `filament_id`:
+
+```json
+{
+  "filament_id": "P3a7f2c1",
+  ...
+}
+```
+
+✅ Correct: ID starts with `P` followed by 7 hex characters  
+❌ Missing or empty: Your OrcaSlicer-KX version is too old — update to v2.4.0-alpha-kx2 or newer
+
+---
+
+## 3. Transfer a Preset to Another PC (Import)
+
+### Export (source PC)
+
+Simply copy the preset file:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+### Import (target PC)
+
+**Method A — Copy file directly:**
+1. Copy the `.json` file to the same directory on the target PC
+2. Restart OrcaSlicer → preset appears in the dropdown
+
+**Method B — OrcaSlicer import function:**
+1. In OrcaSlicer: **File → Import → Import Configs...**
+2. Select the `.json` file
+3. Restart OrcaSlicer
+
+> **Note:** The `filament_id` inside the file is preserved — the preset will be recognized on the target PC exactly as on the source PC.
+
+---
+
+## 4. Link the Preset in KX-Bridge
+
+1. Open the KX-Bridge UI
+2. Go to **Filament Management** → select the AMS slot
+3. In the **Filament Name** field, enter the OrcaSlicer preset name exactly:
+   ```
+   SUNLU PLA+ 2.0
+   ```
+4. Save
+
+The bridge sends `filament_name: "SUNLU PLA+ 2.0"` during sync → OrcaSlicer matches by name and `filament_id` → displays the preset correctly.
+
+---
+
+## Quick Reference
+
+| What | Why |
+|------|-----|
+| Name in OrcaSlicer and Bridge must match **exactly** | Case and special characters are compared |
+| Preset must be compatible with **Anycubic Kobra X 0.4 nozzle** | Select the correct printer when saving |
+| **Restart OrcaSlicer** after saving for the first time | The `filament_id` is only written persistently after a restart |
+| Use **OrcaSlicer-KX v2.4.0-alpha-kx2** or newer | Older versions do not generate a unique `filament_id` for user presets |
+
+---
+---
+
+# Cómo crear, verificar e importar perfiles de filamento personalizados para KX-Bridge
+
+> **Requiere:** OrcaSlicer-KX v2.4.0-alpha-kx2 o superior
+
+---
+
+## ¿Qué es el `filament_id` y por qué es importante?
+
+Cada perfil de filamento en OrcaSlicer tiene un `filament_id` interno. KX-Bridge usa este ID para asignar el perfil correcto durante la sincronización AMS.
+
+- Los perfiles del sistema (p. ej. "Polymaker PolyTerra PLA") tienen un ID fijo como `GFL99` o `OGFL04`.
+- Los **perfiles personalizados (usuario)** reciben automáticamente un ID único que empieza por `P` (p. ej. `P3a7f2c1`) en OrcaSlicer-KX.
+
+Sin un ID único, OrcaSlicer mostrará siempre "Generic PLA" durante la sincronización, aunque el perfil exista.
+
+---
+
+## 1. Crear un perfil de filamento personalizado
+
+1. Iniciar OrcaSlicer-KX
+2. Seleccionar un perfil base adecuado en el **menú desplegable de filamento** (p. ej. "Generic PLA" o un perfil de fabricante)
+3. Ajustar la configuración según sea necesario (temperaturas, refrigeración, etc.)
+4. Hacer clic en el **icono de guardar** (disquete) → **"Save as new preset"**
+5. Introducir un nombre — p. ej. `SUNLU PLA+ 2.0`
+   > Este nombre debe introducirse en la bridge exactamente igual.
+6. Seleccionar impresora: **Anycubic Kobra X 0.4 nozzle** — ¡necesario para la compatibilidad!
+7. Hacer clic en **Guardar**
+8. **Reiniciar OrcaSlicer una vez** — el `filament_id` solo se escribe de forma permanente tras un reinicio.
+
+---
+
+## 2. Verificar el ID único
+
+Tras reiniciar, comprobar que el ID se ha establecido correctamente:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+Abrir el archivo y buscar `filament_id`:
+
+```json
+{
+  "filament_id": "P3a7f2c1",
+  ...
+}
+```
+
+✅ Correcto: el ID empieza por `P` seguido de 7 caracteres hexadecimales  
+❌ Falta o está vacío: la versión de OrcaSlicer-KX es demasiado antigua — actualizar a v2.4.0-alpha-kx2 o superior
+
+---
+
+## 3. Transferir un perfil a otro PC (importar)
+
+### Exportar (PC de origen)
+
+Simplemente copiar el archivo del perfil:
+
+**Windows:**
+```
+%APPDATA%\OrcaSlicer\user\default\filament\SUNLU PLA+ 2.0.json
+```
+
+**Linux:**
+```
+~/.config/OrcaSlicer/user/default/filament/SUNLU PLA+ 2.0.json
+```
+
+### Importar (PC de destino)
+
+**Método A — Copiar el archivo directamente:**
+1. Copiar el archivo `.json` al mismo directorio en el PC de destino
+2. Reiniciar OrcaSlicer → el perfil aparece en el menú desplegable
+
+**Método B — Función de importación de OrcaSlicer:**
+1. En OrcaSlicer: **File → Import → Import Configs...**
+2. Seleccionar el archivo `.json`
+3. Reiniciar OrcaSlicer
+
+> **Nota:** El `filament_id` dentro del archivo se conserva — el perfil se reconocerá en el PC de destino exactamente igual que en el de origen.
+
+---
+
+## 4. Vincular el perfil en KX-Bridge
+
+1. Abrir la interfaz de KX-Bridge
+2. Ir a **Gestión de filamentos** → seleccionar la ranura AMS
+3. En el campo **Nombre de filamento**, introducir el nombre exacto del perfil de OrcaSlicer:
+   ```
+   SUNLU PLA+ 2.0
+   ```
+4. Guardar
+
+La bridge envía `filament_name: "SUNLU PLA+ 2.0"` durante la sincronización → OrcaSlicer busca por nombre y `filament_id` → muestra el perfil correctamente.
+
+---
+
+## Referencia rápida
+
+| Qué | Por qué |
+|-----|---------|
+| El nombre en OrcaSlicer y en Bridge debe coincidir **exactamente** | Se comparan mayúsculas, minúsculas y caracteres especiales |
+| El perfil debe ser compatible con **Anycubic Kobra X 0.4 nozzle** | Seleccionar la impresora correcta al guardar |
+| **Reiniciar OrcaSlicer** tras guardar por primera vez | El `filament_id` solo se escribe de forma permanente tras un reinicio |
+| Usar **OrcaSlicer-KX v2.4.0-alpha-kx2** o superior | Las versiones anteriores no generan un `filament_id` único para perfiles de usuario |
--- a/env_loader.py
+++ b/env_loader.py
@@ -48,3 +48,6 @@ MODE_ID          = get("MODE_ID",          "")
 DEVICE_ID        = get("DEVICE_ID",        "")
 DEFAULT_AMS_SLOT = get("DEFAULT_AMS_SLOT", "auto")
 AUTO_LEVELING    = int(get("AUTO_LEVELING", "1"))
+CAMERA_ON_PRINT  = int(get("CAMERA_ON_PRINT", "0"))
+WEB_UPLOAD_WARNING = int(get("WEB_UPLOAD_WARNING", "1"))
+PRINT_START_DIALOG = int(get("PRINT_START_DIALOG", get("FILE_READY_DIALOG", "1")))
--- a/kobrax_client.py
+++ b/kobrax_client.py
@@ -27,6 +27,7 @@ import hashlib
 import json
 import logging
 import os
+import select
 import socket
 import ssl
 import sys
@@ -120,6 +121,10 @@ class KobraXClient:
        self._buf     = b""
        self._pid     = 1
        self._lock    = threading.Lock()
+        # Generations-Marker: wird bei jedem Socket-Swap/Close erhöht, damit der
+        # Reader-Thread erkennt wenn _reconnect/_do_connect den Socket unter ihm
+        # ersetzt hat (Issue #53). Schützt gegen recv auf einem stale fd.
+        self._sock_gen = 0
        self._running = False

        # Pending requests by msgid (for response ACK)
@@ -167,20 +172,31 @@ class KobraXClient:
        ctx.set_ciphers("DEFAULT:@SECLEVEL=0")
        ctx.load_cert_chain(CERT_FILE, KEY_FILE)

-        raw        = socket.create_connection((self.host, self.port), timeout=5)
-        self._sock = ctx.wrap_socket(raw)
-        log.info("TLS connected  cipher=%s", self._sock.cipher()[0])
+        # Socket als lokale Variable aufbauen — der Handshake (Connect + CONNACK)
+        # läuft OHNE gehaltenes Lock, damit ein langsamer Connect die Sender nicht
+        # einfriert. Erst der fertige Socket wird unter Lock eingeschwenkt (#53).
+        _ai      = socket.getaddrinfo(self.host, self.port, socket.AF_INET, socket.SOCK_STREAM)
+        raw      = socket.create_connection(_ai[0][4], timeout=5)
+        new_sock = ctx.wrap_socket(raw)
+        log.info("TLS connected  cipher=%s", new_sock.cipher()[0])

-        self._sock.sendall(_build_connect(self.client_id, self.username, self.password))
-        self._sock.settimeout(3)
-        r = self._sock.recv(64)
+        new_sock.sendall(_build_connect(self.client_id, self.username, self.password))
+        new_sock.settimeout(3)
+        r = new_sock.recv(64)
        if len(r) < 4 or r[0] != 0x20 or r[3] != 0:
+            try:
+                new_sock.close()
+            except Exception:
+                pass
            raise RuntimeError(f"CONNACK failed: {r.hex()}")
        log.info("CONNACK rc=0")

-        self._sock.settimeout(0.2)
-        self._buf = b""
-        self._subscribe(self._sub_topic())
+        new_sock.settimeout(0.2)
+        with self._lock:
+            self._sock = new_sock
+            self._sock_gen += 1
+            self._buf = b""
+        self._subscribe(self._sub_topic())  # nimmt das Lock selbst — nicht verschachteln
        log.debug("MQTT connected to %s:%s", self.host, self.port)

    def connect(self):
@@ -206,10 +222,14 @@ class KobraXClient:

    def disconnect(self):
        self._running = False
-        try:
-            self._sock.close()
-        except Exception:
-            pass
+        with self._lock:
+            try:
+                if self._sock is not None:
+                    self._sock.close()
+            except Exception:
+                pass
+            self._sock = None
+            self._sock_gen += 1

    def _reconnect(self):
        """Persistenter Reconnect: versucht endlos weiter bis der Drucker wieder
@@ -218,10 +238,16 @@ class KobraXClient:
        nur DEBUG um Log-Spam bei langem Drucker-Ausfall (z.B. über Nacht
        ausgeschaltet) zu vermeiden."""
        log.warning("Verbindung verloren – reconnect…")
-        try:
-            self._sock.close()
-        except Exception:
-            pass
+        # Close + Invalidierung unter Lock, damit kein Sender mitten im sendall
+        # auf den gerade geschlossenen Socket trifft (Issue #53).
+        with self._lock:
+            try:
+                if self._sock is not None:
+                    self._sock.close()
+            except Exception:
+                pass
+            self._sock = None
+            self._sock_gen += 1
        delays = [2, 4, 8, 15, 30, 60]
        attempt = 0
        while self._running:
@@ -245,7 +271,8 @@ class KobraXClient:
        with self._lock:
            pid = self._pid
            self._pid += 1
-            self._sock.sendall(_build_subscribe(topic, pid))
+            if self._sock is not None:
+                self._sock.sendall(_build_subscribe(topic, pid))
        log.info("SUB %s", topic)

    # -- Read loop -----------------------------------------------------------
@@ -255,17 +282,52 @@ class KobraXClient:
        _empty_count = 0
        while self._running:
            if time.time() - last_ping > 30:
+                ping_ok = False
                with self._lock:
                    try:
-                        self._sock.sendall(_build_pingreq())
+                        if self._sock is not None:
+                            self._sock.sendall(_build_pingreq())
+                            ping_ok = True
                    except Exception:
-                        if self._running and not self._reconnect():
-                            break
-                        last_ping = time.time()
-                        continue
+                        ping_ok = False
+                # _reconnect() AUSSERHALB des Locks aufrufen — es nimmt das Lock
+                # selbst, und threading.Lock ist nicht reentrant (sonst Deadlock).
+                if not ping_ok:
+                    if self._running and not self._reconnect():
+                        break
                last_ping = time.time()
+            # Aktuellen Socket + Generation unter Lock greifen, damit ein
+            # paralleler _reconnect/_do_connect-Swap uns nicht auf einem stale
+            # fd pollen lässt (Issue #53).
+            with self._lock:
+                sock = self._sock
+                gen  = self._sock_gen
+            if sock is None:
+                time.sleep(0.05)
+                continue
+
+            # Idle-Wartezeit OHNE Lock — select probt nur die Bereitschaft, so
+            # blockiert der Reader während Leerlauf nie das gemeinsame Lock.
            try:
-                data = self._sock.recv(65536)
+                ready, _, _ = select.select([sock], [], [], 0.2)
+            except (OSError, ValueError):
+                # fd geschlossen/ungültig (Reconnect oder Disconnect mitten im select)
+                if not self._running:
+                    break
+                time.sleep(0.05)
+                continue
+            if not ready:
+                continue  # Leerlauf, kein Lock gehalten
+
+            # Daten liegen an: Lock kurz greifen für das eine recv, serialisiert
+            # gegen alle sendall-Caller. recv blockiert nicht lange (select sagte
+            # ready, Socket-Timeout ist 0.2s).
+            try:
+                with self._lock:
+                    # Socket könnte zwischen select und hier ersetzt worden sein.
+                    if self._sock_gen != gen or self._sock is not sock:
+                        continue
+                    data = sock.recv(65536)
                if not data:
                    # Windows SSL kann kurzzeitig b"" liefern ohne echten EOF
                    _empty_count += 1
@@ -274,7 +336,7 @@ class KobraXClient:
                    continue
                _empty_count = 0
                self._buf += data
-                self._drain()
+                self._drain()  # außerhalb des Locks — Dispatch/event.set() bleibt prompt
            except ssl.SSLWantReadError:
                continue
            except socket.timeout:
@@ -596,7 +658,8 @@ class KobraXClient:
        # langsamerem WLAN am Drucker dauert das Schieben sonst >30 s und
        # würde den Connect-Timeout fälschlich auslösen. Read-Timeout danach
        # generös (Drucker verarbeitet die Datei bevor er antwortet).
-        sock = socket.create_connection((self.host, 18910), timeout=10)
+        _ai  = socket.getaddrinfo(self.host, 18910, socket.AF_INET, socket.SOCK_STREAM)
+        sock = socket.create_connection(_ai[0][4], timeout=10)
        sock.settimeout(None)  # blocking während Send
        sock.sendall(headers + body)
        sock.settimeout(180)
--- a/kobrax_moonraker_bridge.py
+++ b/kobrax_moonraker_bridge.py
--- a/moonraker-obico.cfg.example
+++ b/moonraker-obico.cfg.example
@@ -0,0 +1,18 @@
+[server]
+url = http://127.0.0.1:3334
+auth_token = REPLACE_ME
+sentry_opt = out
+
+[moonraker]
+host = 127.0.0.1
+port = 7125
+
+[webcam]
+disable_video_streaming = False
+snapshot_url = http://127.0.0.1:7125/api/camera/snapshot
+stream_url   = http://127.0.0.1:7125/api/camera/stream
+target_fps   = 5
+
+[logging]
+path  = /opt/printer_data/logs/moonraker-obico.log
+level = INFO
--- a/pull_request_template.md
+++ b/pull_request_template.md
@@ -0,0 +1,21 @@
+## Description
+<!-- What does this PR change? -->
+
+## Related Issue
+Closes #
+
+## Type
+- [ ] Bug fix
+- [ ] Feature
+- [ ] Documentation
+- [ ] Refactoring
+
+## Tested with
+- OrcaSlicer Version:
+- Printer:
+- Moonraker/Klipper Version:
+
+## Checklist
+- [ ] Tests added/updated
+- [ ] CHANGELOG.md updated
+- [ ] No debug code included
--- a/web/themes/default/app.js
+++ b/web/themes/default/app.js
--- a/web/themes/default/index.html
+++ b/web/themes/default/index.html
@@ -38,118 +38,17 @@
      <option value="de">Deutsch</option>
      <option value="en">English</option>
      <option value="es">Espanol</option>
+      <option value="fr">Français</option>
+      <option value="it">Italiano</option>
      <option value="zh-cn">中文(简体)</option>
    </select>
  </div>
-  <button class="theme-btn" onclick="openSettings()" id="settings-btn" title="Einstellungen">⚙</button>
+  <button class="theme-btn" onclick="showPanel('settings')" id="settings-btn" title="Einstellungen">⚙</button>
  <button class="conn-btn disconnected" id="conn-btn" onclick="toggleConnection()">⚡ Verbinden</button>
 </header>

 <!-- ═══ SETTINGS MODAL ═══ -->
-<div class="modal-overlay" id="settings-modal" onclick="if(event.target===this)closeSettings()">
-  <div class="modal-box">
-    <div class="modal-header">
-      <span class="modal-title" id="modal-title-settings">Einstellungen</span>
-      <button class="modal-close" onclick="closeSettings()">✕</button>
-    </div>
-
-    <div>
-      <div class="modal-field" style="margin-bottom:12px">
-        <label id="lbl-printer-name" style="font-weight:600">Drucker-Name</label>
-        <input type="text" id="s-printer-name" placeholder="z.B. Kobra X Links">
-      </div>
-      <div class="modal-section" id="modal-sec-connection">Verbindung</div>
-      <div class="modal-field">
-        <label id="lbl-printer-ip">Drucker-IP</label>
-        <input type="text" id="s-printer-ip" placeholder="192.168.x.x">
-        <small id="lbl-ip-hint" style="color:#f80;display:none"></small>
-      </div>
-      <div class="modal-field">
-        <label id="lbl-mqtt-port">MQTT-Port</label>
-        <input type="number" id="s-mqtt-port" placeholder="9883">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-username">MQTT-Benutzername</label>
-        <input type="text" id="s-username" placeholder="userXXXXXXXX" autocomplete="new-password">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-password">MQTT-Passwort</label>
-        <input type="password" id="s-password" autocomplete="new-password">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-device-id">Device-ID</label>
-        <input type="text" id="s-device-id" placeholder="32 Hex-Zeichen">
-      </div>
-      <div class="modal-field">
-        <label id="lbl-mode-id">Mode-ID</label>
-        <input type="text" id="s-mode-id" placeholder="20030">
-      </div>
-    </div>
-
-    <div>
-      <div class="modal-section" id="modal-sec-print">Druckeinstellungen</div>
-      <div class="modal-field">
-        <label id="lbl-default-slot">Standard-Slot (Einfarbdruck)</label>
-        <select id="s-default-slot">
-          <option value="auto" id="opt-slot-auto">Auto (alle belegten Slots)</option>
-          <option value="0" id="opt-slot-0">Slot 1</option>
-          <option value="1" id="opt-slot-1">Slot 2</option>
-          <option value="2" id="opt-slot-2">Slot 3</option>
-          <option value="3" id="opt-slot-3">Slot 4</option>
-        </select>
-      </div>
-      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
-        <input type="checkbox" id="s-auto-leveling" style="width:auto;margin:0">
-        <label id="lbl-auto-leveling" style="margin:0;cursor:pointer" for="s-auto-leveling">Auto-Leveling vor Druck</label>
-      </div>
-      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
-        <input type="checkbox" id="s-camera-on-print" style="width:auto;margin:0">
-        <label id="lbl-camera-on-print" style="margin:0;cursor:pointer" for="s-camera-on-print">Kamera bei Druckstart einschalten</label>
-      </div>
-      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
-        <input type="checkbox" id="s-web-upload-warning" style="width:auto;margin:0">
-        <label id="lbl-web-upload-warning" style="margin:0;cursor:pointer" for="s-web-upload-warning">Warnung bei Web-Upload-Druck anzeigen</label>
-      </div>
-    </div>
-
-    <div>
-      <div class="modal-section" id="modal-sec-poll">Poll-Intervall</div>
-      <div class="poll-btns">
-        <button class="poll-btn" onclick="setPoll(1000)" id="poll-1">1s</button>
-        <button class="poll-btn active" onclick="setPoll(2000)" id="poll-2">2s</button>
-        <button class="poll-btn" onclick="setPoll(5000)" id="poll-5">5s</button>
-      </div>
-    </div>
-
-    <!-- OrcaSlicer-Profile (Custom-Profile-Import, Issue #41) -->
-    <div>
-      <div class="modal-section" id="modal-sec-orca-profiles">OrcaSlicer-Profile</div>
-      <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="orca-profiles-hint">
-        Eigene Profile aus OrcaSlicer importieren (User-Dir öffnen via Help → Show Configuration Folder)
-      </div>
-      <div id="orca-profiles-list" style="margin-bottom:8px;font-size:12px;color:var(--txt2)"></div>
-      <button class="btn btn-sm" id="btn-orca-profiles-import" onclick="openProfileImport()"
-        style="background:var(--raised);color:var(--txt)">
-        ⬆ <span id="lbl-orca-profiles-import">Profile importieren</span>
-      </button>
-    </div>
-
-    <div>
-      <div class="modal-section" id="modal-sec-version">Version</div>
-      <div class="update-row">
-        <span id="s-version-label" style="font-size:13px;color:var(--txt)">–</span>
-        <button class="btn btn-sm" style="background:var(--raised);color:var(--txt)" onclick="checkUpdate()" id="btn-update-check">🔄 <span id="lbl-update-check">Auf Updates prüfen</span></button>
-      </div>
-      <div class="update-status" id="update-status" style="margin-top:6px"></div>
-      <button class="btn btn-sm btn-accent" id="btn-update-apply" style="display:none;margin-top:8px" onclick="applyUpdate()">
-        <span id="lbl-update-apply">Jetzt installieren</span>
-      </button>
-      <div id="update-changelog" style="display:none;margin-top:10px;background:var(--raised);border-radius:6px;padding:10px;font-size:11px;font-family:var(--mono);color:var(--txt2);white-space:pre-wrap;max-height:180px;overflow-y:auto;line-height:1.6"></div>
-    </div>
-
-    <button class="modal-save" onclick="saveSettings()" id="btn-save-settings">Speichern &amp; Neustart</button>
-  </div>
-</div>
+<!-- Settings-Modal entfernt — jetzt #panel-settings (Master-Detail im Main-Bereich) -->

 <!-- ═══ AMS SLOT EDIT DIALOG ═══ -->
 <div class="modal-overlay" id="slot-edit-modal" onclick="if(event.target===this)closeSlotEdit()">
@@ -229,6 +128,8 @@
      <span class="nav-icon">🗂</span><span class="nav-text">Browser</span></button>
    <button class="nav-btn" onclick="showPanel('console');clearLogBadge()" id="nb-console">
      <span class="nav-icon">≡</span><span class="nav-text">Konsole</span><span id="log-badge" style="display:none;margin-left:4px;background:var(--err);color:#fff;border-radius:10px;font-size:10px;padding:1px 5px;font-weight:700"></span></button>
+    <button class="nav-btn" onclick="showPanel('settings')" id="nb-settings">
+      <span class="nav-icon">⚙</span><span class="nav-text" id="nav-settings">Einstellungen</span></button>
  </nav>

  <main>
@@ -266,9 +167,15 @@
          <div class="pct-big"><span id="d-pct">0</span><small>%</small></div>
          <div style="display:flex;align-items:center;gap:10px;margin:8px 0">
            <div class="progress-bar" style="flex:1;margin:0"><div class="progress-fill" id="d-pbar" style="width:0%"></div></div>
-            <div class="time-block" style="padding:6px 10px;min-width:72px;text-align:center;flex-shrink:0">
-              <div class="time-label" id="d-lbl-layers"></div>
-              <div class="time-val" style="font-size:16px" id="d-layers">–</div>
+            <div style="display:flex;flex-direction:column;gap:4px;flex-shrink:0">
+              <div class="time-block" style="padding:6px 10px;min-width:72px;text-align:center">
+                <div class="time-label" id="d-lbl-layers"></div>
+                <div class="time-val" style="font-size:16px" id="d-layers">–</div>
+              </div>
+              <div class="time-block" style="padding:4px 10px;min-width:72px;text-align:center">
+                <div class="time-label" id="d-lbl-zpos">Z</div>
+                <div class="time-val" style="font-size:13px" id="d-zpos">–</div>
+              </div>
            </div>
          </div>
          <div class="time-grid">
@@ -291,6 +198,12 @@
            <button class="btn btn-skip btn-sm" id="d-btn-skip" onclick="openSkipDialog()" style="display:none">✂ <span id="d-btn-skip-label">Objekte</span></button>
            <button class="btn btn-cancel btn-sm" id="d-btn-cancel" onclick="confirmCancel()">✕ Stopp</button>
          </div>
+          <!-- Aktionen für eine geladene, aber nicht laufende Datei (Issue #55) -->
+          <div class="ctrl-btns" id="d-idle-btns" style="margin-top:12px;display:none">
+            <button class="btn btn-accent btn-sm" id="d-idle-print" onclick="startIdleFile()">▶ <span id="d-idle-print-lbl">Drucken</span></button>
+            <button class="btn btn-sm" id="d-idle-slots" onclick="startIdleFileWithSlots()" style="background:var(--raised);color:var(--txt)">⚙ <span id="d-idle-slots-lbl">Slots zuordnen</span></button>
+            <button class="btn btn-cancel btn-sm" id="d-idle-clear" onclick="clearIdleFile()">✕ <span id="d-idle-clear-lbl">Leeren</span></button>
+          </div>
        </div>

        <!-- Temperatursteuerung + Verlauf -->
@@ -513,6 +426,198 @@
        <div class="console" id="console-log" style="height:calc(100vh - 260px);min-height:160px" onscroll="onLogScroll()"></div>
      </div>
    </div>
+
+    <!-- ═══ EINSTELLUNGEN ═══ -->
+    <div class="panel" id="panel-settings">
+      <div class="settings-wrap">
+        <div class="settings-cats">
+          <button class="set-cat active" id="setcat-connection" onclick="showSettingsCat('connection')"><span>🔌</span> <span id="setcat-lbl-connection">Verbindung</span></button>
+          <button class="set-cat" id="setcat-printer" onclick="showSettingsCat('printer')"><span>🖨</span> <span id="setcat-lbl-printer">Drucker</span></button>
+          <button class="set-cat" id="setcat-display" onclick="showSettingsCat('display')"><span>🎨</span> <span id="setcat-lbl-display">Darstellung</span></button>
+          <button class="set-cat" id="setcat-filament" onclick="showSettingsCat('filament')"><span>🧵</span> <span id="setcat-lbl-filament">Filament</span></button>
+          <button class="set-cat" id="setcat-integrations" onclick="showSettingsCat('integrations')"><span>⚡</span> <span id="setcat-lbl-integrations">Integrationen</span></button>
+          <button class="set-cat" id="setcat-system" onclick="showSettingsCat('system')"><span>⚙</span> <span id="setcat-lbl-system">System</span></button>
+        </div>
+
+        <div class="settings-content">
+          <!-- Verbindung -->
+          <div class="set-group active" id="setgrp-connection">
+            <div class="card">
+              <div class="card-title"><span>🔌</span> <span id="modal-sec-connection">Verbindung</span></div>
+              <div class="modal-field" style="margin-bottom:12px">
+                <label id="lbl-printer-name" style="font-weight:600">Drucker-Name</label>
+                <input type="text" id="s-printer-name" placeholder="z.B. Kobra X Links">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-printer-ip">Drucker-IP</label>
+                <input type="text" id="s-printer-ip" placeholder="192.168.x.x">
+                <small id="lbl-ip-hint" style="color:#f80;display:none"></small>
+              </div>
+              <div class="modal-field">
+                <label id="lbl-mqtt-port">MQTT-Port</label>
+                <input type="number" id="s-mqtt-port" placeholder="9883">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-username">MQTT-Benutzername</label>
+                <input type="text" id="s-username" placeholder="userXXXXXXXX" autocomplete="new-password">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-password">MQTT-Passwort</label>
+                <input type="password" id="s-password" autocomplete="new-password">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-device-id">Device-ID</label>
+                <input type="text" id="s-device-id" placeholder="32 Hex-Zeichen">
+              </div>
+              <div class="modal-field">
+                <label id="lbl-mode-id">Mode-ID</label>
+                <input type="text" id="s-mode-id" placeholder="20030">
+              </div>
+            </div>
+          </div>
+
+          <!-- Drucker -->
+          <div class="set-group" id="setgrp-printer">
+            <div class="card">
+              <div class="card-title"><span>🖨</span> <span id="modal-sec-print">Druckeinstellungen</span></div>
+              <div class="modal-field">
+                <label id="lbl-default-slot">Standard-Slot (Einfarbdruck)</label>
+                <select id="s-default-slot">
+                  <option value="auto" id="opt-slot-auto">Auto (alle belegten Slots)</option>
+                  <option value="0" id="opt-slot-0">Slot 1</option>
+                  <option value="1" id="opt-slot-1">Slot 2</option>
+                  <option value="2" id="opt-slot-2">Slot 3</option>
+                  <option value="3" id="opt-slot-3">Slot 4</option>
+                </select>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <input type="checkbox" id="s-auto-leveling" style="width:auto;margin:0">
+                <label id="lbl-auto-leveling" style="margin:0;cursor:pointer" for="s-auto-leveling">Auto-Leveling vor Druck</label>
+              </div>
+              <div class="modal-field">
+                <label id="lbl-file-ready-mode">Nach Upload: Druckstart-Verhalten</label>
+                <select id="s-file-ready-mode">
+                  <option value="1" id="opt-file-ready-dialog">Print-Dialog</option>
+                  <option value="0" id="opt-file-ready-banner">Print-Leiste</option>
+                </select>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <input type="checkbox" id="s-camera-on-print" style="width:auto;margin:0">
+                <label id="lbl-camera-on-print" style="margin:0;cursor:pointer" for="s-camera-on-print">Kamera bei Druckstart einschalten</label>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <input type="checkbox" id="s-web-upload-warning" style="width:auto;margin:0">
+                <label id="lbl-web-upload-warning" style="margin:0;cursor:pointer" for="s-web-upload-warning">Warnung bei Web-Upload-Druck anzeigen</label>
+              </div>
+            </div>
+          </div>
+
+          <!-- Darstellung -->
+          <div class="set-group" id="setgrp-display">
+            <div class="card">
+              <div class="card-title"><span>🎨</span> <span id="setcat-lbl-display2">Darstellung</span></div>
+              <div class="modal-field">
+                <label id="lbl-set-lang">Sprache</label>
+                <select id="s-lang-select" onchange="setLanguage(this.value)">
+                  <option value="de">Deutsch</option>
+                  <option value="en">English</option>
+                  <option value="es">Espanol</option>
+                  <option value="fr">Français</option>
+                  <option value="it">Italiano</option>
+                  <option value="zh-cn">中文(简体)</option>
+                </select>
+              </div>
+              <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+                <button class="btn btn-sm" style="background:var(--raised);color:var(--txt)" onclick="toggleTheme()"><span id="lbl-set-theme">Hell / Dunkel umschalten</span></button>
+              </div>
+              <div class="modal-field">
+                <label id="lbl-poll-interval">Poll-Intervall (Sekunden)</label>
+                <input type="number" id="s-poll-interval" min="1" max="60" step="1" placeholder="3" oninput="onPollIntervalInput()">
+                <small style="color:var(--txt2)" id="lbl-poll-hint">Wie oft die Bridge den Drucker-Status abfragt</small>
+              </div>
+            </div>
+          </div>
+
+          <!-- Filament -->
+          <div class="set-group" id="setgrp-filament">
+            <div class="card">
+              <div class="card-title"><span>🧵</span> <span id="modal-sec-orca-profiles">OrcaSlicer-Profile</span></div>
+              <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="orca-profiles-hint">
+                Eigene Profile aus OrcaSlicer importieren (User-Dir öffnen via Help → Show Configuration Folder)
+              </div>
+              <div id="orca-profiles-list" style="margin-bottom:8px;font-size:12px;color:var(--txt2)"></div>
+              <button class="btn btn-sm" id="btn-orca-profiles-import" onclick="openProfileImport()"
+                style="background:var(--raised);color:var(--txt)">
+                ⬆ <span id="lbl-orca-profiles-import">Profile importieren</span>
+              </button>
+            </div>
+            <div class="card">
+              <div class="card-title"><span>🎯</span> <span id="lbl-filament-mapping">Filament-Profil-Mapping (pro Slot)</span></div>
+              <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="filament-mapping-hint">
+                Festes Orca-Profil pro AMS-Slot. Beim Slicer-Sync sendet die Bridge dieses Profil statt „Generic".
+              </div>
+              <div id="filament-mapping-list"></div>
+              <button class="btn btn-sm" style="background:var(--accent);color:#fff;margin-top:8px" onclick="saveFilamentMapping()"><span id="lbl-filament-mapping-save">Mapping speichern</span></button>
+            </div>
+            <div class="card">
+              <div class="card-title"><span>👁</span> <span id="lbl-visible-vendors">Sichtbare Hersteller (Profil-Dropdown)</span></div>
+              <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="visible-vendors-hint">
+                Nur diese Hersteller erscheinen im Slot-Profil-Dropdown. Nichts ausgewählt = alle anzeigen. „Generic" und eigene Profile sind immer sichtbar.
+              </div>
+              <input type="text" id="vendor-filter-search" placeholder="Hersteller suchen…" oninput="renderVendorChecklist()"
+                style="width:100%;padding:6px 10px;margin-bottom:8px;background:var(--raised);border:1px solid var(--border);border-radius:6px;color:var(--txt);font-size:12px">
+              <div id="visible-vendors-list" style="max-height:260px;overflow-y:auto;border:1px solid var(--border);border-radius:6px;padding:8px"></div>
+              <button class="btn btn-sm" style="background:var(--accent);color:#fff;margin-top:8px" onclick="saveVisibleVendors()"><span id="lbl-visible-vendors-save">Auswahl speichern</span></button>
+            </div>
+          </div>
+
+          <!-- Integrationen -->
+          <div class="set-group" id="setgrp-integrations">
+            <!-- Spoolman -->
+            <div class="card">
+              <div class="card-title"><span>🧵</span> <span id="modal-sec-spoolman">Spoolman</span></div>
+              <div class="set-row">
+                <label id="lbl-spoolman-url">Server-URL</label>
+                <input type="text" id="s-spoolman-url" placeholder="http://spoolman:7912" style="width:200px">
+              </div>
+              <div class="set-row">
+                <label id="lbl-spoolman-sync-rate">Sync-Rate (s, 0=aus)</label>
+                <input type="number" id="s-spoolman-sync-rate" min="0" max="3600" value="30" style="width:80px">
+              </div>
+              <div id="spoolman-status-row" style="margin-top:6px;font-size:12px;color:var(--txt2)">
+                <span id="spoolman-status-dot">●</span> <span id="spoolman-status-lbl"></span>
+              </div>
+            </div>
+            <!-- Obico -->
+            <div class="card" style="margin-top:10px">
+              <div class="card-title"><span>🕵</span> <span id="modal-sec-obico">Obico</span></div>
+              <div style="font-size:12px;color:var(--txt2);line-height:1.6" id="obico-info-box">
+                Obico wird über den <code>moonraker-obico</code>-Container konfiguriert.<br>
+                Config-Datei: <code id="obico-cfg-path">/mnt/dockerdata/KobraXStack/moonraker-obico/moonraker-obico.cfg</code>
+              </div>
+            </div>
+          </div>
+
+          <!-- System -->
+          <div class="set-group" id="setgrp-system">
+            <div class="card">
+              <div class="card-title"><span>⚙</span> <span id="modal-sec-version">Version</span></div>
+              <div class="update-row">
+                <span id="s-version-label" style="font-size:13px;color:var(--txt)">–</span>
+                <button class="btn btn-sm" style="background:var(--raised);color:var(--txt)" onclick="checkUpdate()" id="btn-update-check">🔄 <span id="lbl-update-check">Auf Updates prüfen</span></button>
+              </div>
+              <div class="update-status" id="update-status" style="margin-top:6px"></div>
+              <button class="btn btn-sm btn-accent" id="btn-update-apply" style="display:none;margin-top:8px" onclick="applyUpdate()">
+                <span id="lbl-update-apply">Jetzt installieren</span>
+              </button>
+              <div id="update-changelog" style="display:none;margin-top:10px;background:var(--raised);border-radius:6px;padding:10px;font-size:11px;font-family:var(--mono);color:var(--txt2);white-space:pre-wrap;max-height:180px;overflow-y:auto;line-height:1.6"></div>
+            </div>
+          </div>
+
+          <button class="modal-save" onclick="saveSettings()" id="btn-save-settings" style="margin-top:14px">Speichern &amp; Neustart</button>
+        </div>
+      </div>
+    </div>
  </main>
 </div>

@@ -521,6 +626,7 @@
  <button class="bnav-btn" onclick="showPanel('printers');loadPrinterTab()" id="bnb-printers"><span class="bnav-icon">🖨</span>Drucker</button>
  <button class="bnav-btn" onclick="showPanel('store');loadStore()" id="bnb-store"><span class="bnav-icon">🗂</span>Browser</button>
  <button class="bnav-btn" onclick="showPanel('console');clearLogBadge()" id="bnb-console"><span class="bnav-icon">≡</span>Log<span id="log-badge-bot" style="display:none;margin-left:3px;background:var(--err);color:#fff;border-radius:10px;font-size:10px;padding:1px 4px;font-weight:700"></span></button>
+  <button class="bnav-btn" onclick="showPanel('settings')" id="bnb-settings"><span class="bnav-icon">⚙</span>Setup</button>
 </nav>


@@ -550,9 +656,30 @@
    <p id="fd-slots-hint" style="font-size:12px;color:var(--txt2);margin-bottom:10px">GCode-Kanal → AMS-Slot zuweisen:</p>
    <div id="fd-slots" style="display:flex;flex-direction:column;gap:8px;margin-bottom:16px"></div>
    <div id="fd-objects-section" style="display:none;margin-bottom:16px">
-      <p id="fd-objects-hint" style="font-size:12px;color:var(--txt2);margin-bottom:8px">Objekte überspringen (optional):</p>
-      <div id="fd-objects-svg" style="display:none;background:var(--raised);border:1px solid var(--border);border-radius:8px;padding:6px;margin-bottom:8px;text-align:center"></div>
-      <div id="fd-objects" style="display:flex;flex-direction:column;gap:6px;max-height:140px;overflow-y:auto"></div>
+      <button type="button" id="fd-objects-toggle" onclick="toggleFdObjects()"
+        style="display:flex;align-items:center;gap:8px;width:100%;padding:8px 10px;background:var(--raised);border:1px solid var(--border);border-radius:8px;color:var(--txt);cursor:pointer;font-size:12px;text-align:left">
+        <span id="fd-objects-arrow" style="font-size:10px;transition:transform .15s">▶</span>
+        <span>✂ <span id="fd-objects-toggle-lbl">Objekte überspringen</span></span>
+        <span id="fd-objects-count" style="margin-left:auto;color:var(--txt2);font-weight:600"></span>
+      </button>
+      <div id="fd-objects-body" style="display:none;margin-top:8px">
+        <div id="fd-objects-svg" style="display:none;background:var(--raised);border:1px solid var(--border);border-radius:8px;padding:6px;margin-bottom:8px;text-align:center"></div>
+        <div id="fd-objects" style="display:flex;flex-direction:column;gap:6px;max-height:140px;overflow-y:auto"></div>
+      </div>
+    </div>
+    <div style="margin-bottom:14px;padding:10px 12px;background:var(--raised);border-radius:8px;border:1px solid var(--border)">
+      <div style="font-size:11px;font-weight:600;color:var(--txt2);margin-bottom:8px;text-transform:uppercase;letter-spacing:.05em" id="fd-options-title">Druckoptionen</div>
+      <div style="display:flex;align-items:center;gap:8px">
+        <input type="checkbox" id="fd-auto-leveling" style="width:auto;margin:0">
+        <label for="fd-auto-leveling" style="margin:0;cursor:pointer;font-size:13px" id="fd-lbl-auto-leveling">Auto-Leveling</label>
+      </div>
+    </div>
+    <div id="fd-spoolman-section" style="display:none;margin-bottom:16px;border-top:1px solid var(--border);padding-top:12px">
+      <p style="font-size:12px;color:var(--txt2);margin-bottom:8px;display:flex;align-items:center;gap:6px">
+        <span id="fd-spoolman-lbl">🧵 Spoolman</span>
+        <span id="fd-spoolman-loading" style="display:none;font-size:10px">…</span>
+      </p>
+      <div id="fd-spoolman-rows" style="display:flex;flex-direction:column;gap:6px"></div>
    </div>
    <div style="display:flex;gap:8px;justify-content:flex-end">
      <button id="fd-cancel" onclick="closeFilamentDialog()" style="padding:8px 16px;background:var(--raised);border:1px solid var(--border);border-radius:8px;color:var(--txt);cursor:pointer">Abbrechen</button>
--- a/web/themes/default/style.css
+++ b/web/themes/default/style.css
@@ -212,6 +212,24 @@ canvas.tchart{width:100%;height:60px;display:block;border-radius:6px;background:
 .panel{display:none}
 .panel.active{display:block}

+/* ── SETTINGS (Master-Detail) ── */
+.settings-wrap{display:grid;grid-template-columns:200px 1fr;gap:16px;align-items:start}
+.settings-cats{display:flex;flex-direction:column;gap:4px;position:sticky;top:12px}
+.set-cat{display:flex;align-items:center;gap:8px;padding:10px 12px;border-radius:8px;
+  border:1px solid transparent;background:var(--raised);color:var(--txt2);cursor:pointer;
+  font-size:13px;text-align:left;transition:background .15s,color .15s}
+.set-cat:hover{color:var(--txt)}
+.set-cat.active{background:var(--accent);color:#fff;border-color:var(--accent)}
+.set-group{display:none}
+.set-group.active{display:block}
+.set-group .card{margin-bottom:14px}
+@media(max-width:768px){
+  .settings-wrap{grid-template-columns:1fr}
+  .settings-cats{flex-direction:row;flex-wrap:wrap;position:static;overflow-x:auto}
+  .set-cat{flex:1;min-width:auto;justify-content:center;padding:8px 6px;font-size:12px}
+  .set-cat .nav-text{display:inline}
+}
+
 /* ── FILE BROWSER UPLOAD ZONE ── */
 #store-upload-zone{
  display:flex;flex-direction:column;align-items:center;justify-content:center;
--- a/web/translations/de.json
+++ b/web/translations/de.json
@@ -37,6 +37,7 @@
  "lbl_remaining": "Restzeit:",
  "lbl_slicer_time": "Slicer-Schätzung:",
  "lbl_layers": "Layer",
+  "lbl_zpos": "Z (mm)",
  "speed_silent": "🐢 Leise",
  "speed_normal": "⚡ Normal",
  "speed_sport": "🚀 Sport",
@@ -126,8 +127,21 @@
  "settings_title": "Einstellungen",
  "settings_connection": "Verbindung",
  "settings_print": "Druckeinstellungen",
-  "settings_poll": "Poll-Intervall",
+  "settings_poll": "Poll-Intervall (Sekunden)",
  "settings_version": "Version",
+  "nav_settings": "Einstellungen",
+  "settings_cat_display": "Darstellung",
+  "settings_cat_filament": "Filament",
+  "settings_cat_language": "Sprache",
+  "settings_cat_theme": "Hell / Dunkel umschalten",
+  "settings_filament_mapping": "Filament-Profil-Mapping (pro Slot)",
+  "settings_filament_mapping_save": "Mapping speichern",
+  "settings_visible_vendors": "Sichtbare Hersteller (Profil-Dropdown)",
+  "settings_visible_vendors_hint": "Nur diese Hersteller erscheinen im Slot-Profil-Dropdown. Nichts ausgewählt = alle anzeigen. „Generic\" und eigene Profile sind immer sichtbar.",
+  "settings_visible_vendors_save": "Auswahl speichern",
+  "progress_action_print": "Drucken",
+  "progress_action_slots": "Slots zuordnen",
+  "progress_action_clear": "Leeren",
  "settings_save": "Speichern & Neustart",
  "settings_printer_name": "Drucker-Name",
  "settings_printer_ip": "Drucker-IP",
@@ -192,6 +206,7 @@
  "skip_sending": "Sende …",
  "skip_success": "Objekte werden übersprungen.",
  "fd_objects_hint": "Objekte überspringen (optional):",
+  "fd_objects_toggle": "Objekte überspringen",
  "fd_slots_hint": "GCode-Kanal → AMS-Slot zuweisen:",
  "fd_cancel": "Abbrechen",
  "fd_print": "▶ Drucken",
@@ -237,11 +252,45 @@
  "store_upload_busy": "⏳ Hochladen…",
  "store_upload_success": "✓ {file}",
  "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Nur GCode-Dateien erlaubt (.gcode, .3mf, .bgcode)",
  "sf_all": "Alle",
  "sf_ok": "✓ Erfolgreich",
  "sf_err": "✗ Fehler",
  "sf_new": "Neu",
  "ss_date": "↓ Datum",
  "ss_name": "A–Z Name",
-  "ss_dur": "⏱ Druckzeit"
-}
+  "ss_dur": "⏱ Druckzeit",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Custom",
+  "fd_options_title": "Optionen",
+  "print_auto_leveling": "Auto-Leveling für diesen Druck",
+  "settings_file_ready_mode": "Druckdialog starten",
+  "settings_file_ready_banner": "Druckleiste",
+  "settings_file_ready_dialog": "Druckdialog",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Richtung:",
+  "log_lvl_err": "⛔ Fehler",
+  "log_lvl_warn": "⚠ Warnung",
+  "log_topic_label": "Thema:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Druck",
+  "log_topic_info": "Info",
+  "log_topic_status": "Status",
+  "log_download": "⬇ Download",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Leeren",
+  "log_filter_placeholder": "Filtern…",
+  "skip_cancel": "Abbrechen",
+  "skip_confirm": "Überspringen",
+  "settings_integrations": "Integrationen",
+  "modal_sec_spoolman": "Spoolman",
+  "lbl_spoolman_url": "Server-URL",
+  "lbl_spoolman_sync_rate": "Sync-Rate (s, 0=aus)",
+  "modal_sec_obico": "Obico"
+}
--- a/web/translations/en.json
+++ b/web/translations/en.json
@@ -37,6 +37,7 @@
  "lbl_remaining": "Remaining:",
  "lbl_slicer_time": "Slicer estimate:",
  "lbl_layers": "Layer",
+  "lbl_zpos": "Z (mm)",
  "speed_silent": "🐢 Silent",
  "speed_normal": "⚡ Normal",
  "speed_sport": "🚀 Sport",
@@ -68,6 +69,13 @@
  "ace_dry_dialog_save_restart": "Save & Restart",
  "ace_dry_dialog_custom_name": "Custom Name",
  "ace_dry_dialog_reset_default": "Reset to Default",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Custom",
  "cam_placeholder": "📷 Camera not started",
  "cam_stream_unavailable": "Stream unavailable",
  "btn_cam_start": "▶ Camera",
@@ -126,7 +134,20 @@
  "settings_title": "Settings",
  "settings_connection": "Connection",
  "settings_print": "Print Settings",
-  "settings_poll": "Poll Interval",
+  "settings_poll": "Poll Interval (seconds)",
+  "nav_settings": "Settings",
+  "settings_cat_display": "Appearance",
+  "settings_cat_filament": "Filament",
+  "settings_cat_language": "Language",
+  "settings_cat_theme": "Toggle light / dark",
+  "settings_filament_mapping": "Filament profile mapping (per slot)",
+  "settings_filament_mapping_save": "Save mapping",
+  "settings_visible_vendors": "Visible vendors (profile dropdown)",
+  "settings_visible_vendors_hint": "Only these vendors appear in the slot profile dropdown. Nothing selected = show all. \"Generic\" and your own profiles are always visible.",
+  "settings_visible_vendors_save": "Save selection",
+  "progress_action_print": "Print",
+  "progress_action_slots": "Map slots",
+  "progress_action_clear": "Clear",
  "settings_version": "Version",
  "settings_save": "Save & Restart",
  "settings_printer_name": "Printer Name",
@@ -139,7 +160,12 @@
  "hint_ip_no_port": "IP address only, no port (e.g. 192.168.1.102)",
  "settings_default_slot": "Default Slot (single color)",
  "settings_slot_auto": "Auto (all loaded slots)",
-  "settings_auto_leveling": "Auto-Leveling before print",
+  "settings_auto_leveling": "Auto-Leveling Default",
+  "fd_options_title": "Print Options",
+  "print_auto_leveling": "Auto-Leveling",
+  "settings_file_ready_mode": "Start Print Behavior",
+  "settings_file_ready_banner": "Print Bar",
+  "settings_file_ready_dialog": "Print Dialog",
  "settings_camera_on_print": "Turn camera on at print start",
  "settings_web_upload_warning": "Show warning when printing web uploads",
  "update_check": "Check for Updates",
@@ -178,7 +204,21 @@
  "orca_profile_done": "Imported",
  "orca_profile_skipped": "skipped",
  "log_dir_all": "All",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Dir:",
  "log_lvl_label": "Level:",
+  "log_lvl_err": "⛔ Errors",
+  "log_lvl_warn": "⚠ Warn",
+  "log_topic_label": "Topic:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Print",
+  "log_topic_info": "Info",
+  "log_topic_status": "Status",
+  "log_download": "⬇ Download",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Clear",
+  "log_filter_placeholder": "Filter…",
  "file_ready_btn": "▶ Start Print",
  "file_slots_btn": "🎨 Select Slots",
  "file_cancel_btn": "✕ Cancel",
@@ -188,10 +228,13 @@
  "skip_btn_label": "Objects",
  "skip_no_objects": "No objects in this print.",
  "skip_already": "skipped",
+  "skip_cancel": "Cancel",
+  "skip_confirm": "Skip",
  "skip_select_at_least_one": "Please pick at least one object.",
  "skip_sending": "Sending …",
  "skip_success": "Objects will be skipped.",
  "fd_objects_hint": "Skip objects (optional):",
+  "fd_objects_toggle": "Skip objects",
  "fd_slots_hint": "Assign GCode channel to AMS slot:",
  "fd_cancel": "Cancel",
  "fd_print": "▶ Print",
@@ -237,11 +280,17 @@
  "store_upload_busy": "⏳ Uploading…",
  "store_upload_success": "✓ {file}",
  "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Only GCode files allowed (.gcode, .3mf, .bgcode)",
  "sf_all": "All",
  "sf_ok": "✓ Completed",
  "sf_err": "✗ Failed",
  "sf_new": "New",
  "ss_date": "↓ Date",
  "ss_name": "A–Z Name",
-  "ss_dur": "⏱ Print time"
-}
+  "ss_dur": "⏱ Print time",
+  "settings_integrations": "Integrations",
+  "modal_sec_spoolman": "Spoolman",
+  "lbl_spoolman_url": "Server URL",
+  "lbl_spoolman_sync_rate": "Sync rate (s, 0=off)",
+  "modal_sec_obico": "Obico"
+}
--- a/web/translations/es.json
+++ b/web/translations/es.json
@@ -37,6 +37,7 @@
  "lbl_remaining": "Restante:",
  "lbl_slicer_time": "Estimación del slicer:",
  "lbl_layers": "Capa",
+  "lbl_zpos": "Z (mm)",
  "speed_silent": "🐢 Silencioso",
  "speed_normal": "⚡ Normal",
  "speed_sport": "🚀 Sport",
@@ -126,7 +127,20 @@
  "settings_title": "Configuración",
  "settings_connection": "Conexión",
  "settings_print": "Ajustes de impresión",
-  "settings_poll": "Intervalo de sondeo",
+  "settings_poll": "Intervalo de sondeo (segundos)",
+  "nav_settings": "Ajustes",
+  "settings_cat_display": "Apariencia",
+  "settings_cat_filament": "Filamento",
+  "settings_cat_language": "Idioma",
+  "settings_cat_theme": "Alternar claro / oscuro",
+  "settings_filament_mapping": "Asignación de perfil de filamento (por ranura)",
+  "settings_filament_mapping_save": "Guardar asignación",
+  "settings_visible_vendors": "Fabricantes visibles (lista de perfiles)",
+  "settings_visible_vendors_hint": "Solo estos fabricantes aparecen en la lista de perfiles de ranura. Nada seleccionado = mostrar todos. «Generic» y tus propios perfiles siempre son visibles.",
+  "settings_visible_vendors_save": "Guardar selección",
+  "progress_action_print": "Imprimir",
+  "progress_action_slots": "Asignar ranuras",
+  "progress_action_clear": "Vaciar",
  "settings_version": "Versión",
  "settings_save": "Guardar y reiniciar",
  "settings_printer_name": "Nombre de impresora",
@@ -192,6 +206,7 @@
  "skip_sending": "Enviando …",
  "skip_success": "Se omitirán los objetos.",
  "fd_objects_hint": "Omitir objetos (opcional):",
+  "fd_objects_toggle": "Omitir objetos",
  "fd_slots_hint": "Asignar canal GCode a la ranura AMS:",
  "fd_cancel": "Cancelar",
  "fd_print": "▶ Imprimir",
@@ -237,11 +252,45 @@
  "store_upload_busy": "⏳ Subiendo…",
  "store_upload_success": "✓ {file}",
  "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Solo se permiten archivos GCode (.gcode, .3mf, .bgcode)",
  "sf_all": "Todos",
  "sf_ok": "✓ Completado",
  "sf_err": "✗ Fallido",
  "sf_new": "Nuevo",
  "ss_date": "↓ Fecha",
  "ss_name": "A–Z Nombre",
-  "ss_dur": "⏱ Tiempo de impresión"
-}
+  "ss_dur": "⏱ Tiempo de impresión",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Personalizado",
+  "fd_options_title": "Opciones",
+  "print_auto_leveling": "Autonivelado para esta impresión",
+  "settings_file_ready_mode": "Iniciar diálogo de impresión",
+  "settings_file_ready_banner": "Barra de impresión",
+  "settings_file_ready_dialog": "Diálogo de impresión",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Dirección:",
+  "log_lvl_err": "⛔ Errores",
+  "log_lvl_warn": "⚠ Avisos",
+  "log_topic_label": "Tema:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Impresión",
+  "log_topic_info": "Info",
+  "log_topic_status": "Estado",
+  "log_download": "⬇ Descargar",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Limpiar",
+  "log_filter_placeholder": "Filtrar…",
+  "skip_cancel": "Cancelar",
+  "skip_confirm": "Omitir",
+  "settings_integrations": "Integraciones",
+  "modal_sec_spoolman": "Spoolman",
+  "lbl_spoolman_url": "URL del servidor",
+  "lbl_spoolman_sync_rate": "Tasa de sincronización (s, 0=desact.)",
+  "modal_sec_obico": "Obico"
+}
--- a/web/translations/fr.json
+++ b/web/translations/fr.json
@@ -0,0 +1,296 @@
+{
+  "header_status_standby": "Prêt",
+  "header_status_printing": "Impression",
+  "header_status_complete": "Terminé",
+  "header_status_error": "Erreur",
+  "kobra_free": "Disponible",
+  "kobra_busy": "Occupé",
+  "kobra_printing": "Impression",
+  "kobra_preheating": "Préchauffage",
+  "kobra_auto_leveling": "Mise à niveau auto",
+  "kobra_checking": "Vérification",
+  "kobra_updated": "Mise à jour",
+  "kobra_init": "Initialisation",
+  "kobra_pausing": "Pause en cours…",
+  "kobra_paused": "En pause",
+  "kobra_resuming": "Reprise en cours…",
+  "kobra_resumed": "Repris",
+  "kobra_stopping": "Arrêt en cours…",
+  "kobra_stoped": "Arrêté",
+  "kobra_finished": "Terminé",
+  "kobra_failed": "Erreur",
+  "kobra_canceled": "Annulé",
+  "kobra_offline": "Hors ligne",
+  "nav_dashboard": "Tableau de bord",
+  "nav_print": "Impression",
+  "nav_temps": "Températures",
+  "nav_motion": "Mouvement",
+  "nav_ams": "AMS",
+  "nav_extras": "Lumière / Ventilateur",
+  "nav_console": "Console",
+  "card_progress": "Progression",
+  "card_temps": "Températures",
+  "card_light_fan": "Ventilateur",
+  "card_speed": "Vitesse d'impression",
+  "card_cam": "Caméra",
+  "lbl_elapsed": "Écoulé :",
+  "lbl_remaining": "Restant :",
+  "lbl_slicer_time": "Estimation slicer :",
+  "lbl_layers": "Couche",
+  "lbl_zpos": "Z (mm)",
+  "speed_silent": "🐢 Silencieux",
+  "speed_normal": "⚡ Normal",
+  "speed_sport": "🚀 Sport",
+  "lbl_light": "💡 Lumière",
+  "lbl_feed": "Charger",
+  "lbl_unload": "Décharger",
+  "card_ace_dry": "Séchage ACE",
+  "ace_dry_dryer": "Séchoir",
+  "ace_dry_status_off": "Statut : Arrêté",
+  "ace_dry_status_on": "Statut : Actif",
+  "ace_dry_status_remaining": "Restant",
+  "ace_dry_humidity": "Humidité",
+  "ace_dry_current_temp": "Température",
+  "ace_dry_chart": "Historique (Temp/Humidité)",
+  "ace_dry_temp": "Température (°C)",
+  "ace_dry_duration": "Durée (min)",
+  "ace_dry_start": "▶ Démarrer",
+  "ace_dry_stop": "■ Arrêter",
+  "ace_dry_auto_refill": "Remplissage auto",
+  "ace_dry_enable": "Activer le séchage",
+  "ace_dry_temp_line": "Température de séchage",
+  "ace_dry_time_line": "Durée de séchage",
+  "ace_dry_ui_pending": "(Interface seule, backend suivant)",
+  "ace_dry_dialog_title": "Réglages Temp/Durée du séchoir",
+  "ace_dry_dialog_temp": "Température (30-80°C)",
+  "ace_dry_dialog_time": "Temps restant (h:m:s)",
+  "ace_dry_dialog_confirm": "Confirmer",
+  "ace_dry_dialog_cancel": "Annuler",
+  "ace_dry_dialog_save_restart": "Enregistrer et redémarrer",
+  "ace_dry_dialog_custom_name": "Nom personnalisé",
+  "ace_dry_dialog_reset_default": "Réinitialiser",
+  "cam_placeholder": "📷 Caméra non démarrée",
+  "cam_stream_unavailable": "Flux indisponible",
+  "btn_cam_start": "▶ Caméra",
+  "btn_cam_stop": "◼ Caméra",
+  "btn_pause": "⏸ Pause",
+  "btn_resume": "▶ Reprendre",
+  "btn_cancel": "✕ Arrêter",
+  "label_nozzle": "Buse",
+  "label_bed": "Plateau",
+  "label_fan": "🌀 Ventilateur",
+  "label_light": "💡 Lumière",
+  "label_on_off": "On / Off",
+  "label_speed": "Vitesse",
+  "panel_print_title": "Contrôle impression",
+  "panel_print_btn_pause": "⏸ Pause",
+  "panel_print_btn_resume": "▶ Reprendre",
+  "panel_print_btn_cancel": "✕ Annuler",
+  "panel_print_temps_live": "Températures (en direct)",
+  "label_set": "Définir",
+  "label_off": "Éteint",
+  "panel_temps_nozzle": "Buse",
+  "panel_temps_bed": "Plateau chauffant",
+  "panel_temps_chart": "Historique (60 dernières valeurs)",
+  "label_target_c": "Cible :",
+  "panel_motion_xy": "Axes XY",
+  "panel_motion_z": "Axe Z",
+  "label_step": "Pas :",
+  "btn_home_z": "Origine Z",
+  "btn_home_xy": "Origine XY",
+  "btn_home_all": "Origine Tout",
+  "btn_disable_motors": "Moteurs Off",
+  "panel_ams_title": "Filament",
+  "card_ams": "Filament",
+  "ams_no_data": "Aucune donnée AMS reçue",
+  "label_slot": "Slot",
+  "ams_empty": "Vide",
+  "panel_extras_light": "Lumière",
+  "panel_extras_fan": "Ventilateur",
+  "panel_extras_camera": "Caméra",
+  "btn_cam_start2": "▶ Démarrer",
+  "btn_cam_stop2": "◼ Arrêter",
+  "panel_console_title": "Journal d'événements",
+  "log_light_on": "Lumière allumée",
+  "log_light_off": "Lumière éteinte",
+  "log_fan": "Ventilateur →",
+  "log_nozzle": "Buse →",
+  "log_bed": "Plateau →",
+  "log_axis": "Axe",
+  "log_home": "Origine",
+  "log_home_all": "Origine Tout",
+  "log_cam_start": "Caméra démarrée :",
+  "log_cam_stop": "Caméra arrêtée",
+  "log_poll_error": "Erreur de sondage :",
+  "log_error": "Erreur :",
+  "confirm_cancel": "Vraiment annuler l'impression ?",
+  "settings_title": "Paramètres",
+  "settings_connection": "Connexion",
+  "settings_print": "Paramètres d'impression",
+  "settings_poll": "Intervalle de sondage (secondes)",
+  "nav_settings": "Paramètres",
+  "settings_cat_display": "Apparence",
+  "settings_cat_filament": "Filament",
+  "settings_cat_language": "Langue",
+  "settings_cat_theme": "Basculer clair / sombre",
+  "settings_filament_mapping": "Mappage du profil de filament (par emplacement)",
+  "settings_filament_mapping_save": "Enregistrer le mappage",
+  "settings_visible_vendors": "Fabricants visibles (liste des profils)",
+  "settings_visible_vendors_hint": "Seuls ces fabricants apparaissent dans la liste des profils d'emplacement. Rien de sélectionné = tout afficher. « Generic » et vos propres profils sont toujours visibles.",
+  "settings_visible_vendors_save": "Enregistrer la sélection",
+  "progress_action_print": "Imprimer",
+  "progress_action_slots": "Affecter les emplacements",
+  "progress_action_clear": "Vider",
+  "settings_version": "Version",
+  "settings_save": "Enregistrer et redémarrer",
+  "settings_printer_name": "Nom de l'imprimante",
+  "settings_printer_ip": "IP de l'imprimante",
+  "settings_mqtt_port": "Port MQTT",
+  "settings_username": "Nom d'utilisateur MQTT",
+  "settings_password": "Mot de passe MQTT",
+  "settings_device_id": "ID de l'appareil",
+  "settings_mode_id": "ID du mode",
+  "hint_ip_no_port": "Adresse IP uniquement, sans port (ex. 192.168.1.102)",
+  "settings_default_slot": "Slot par défaut (couleur unique)",
+  "settings_slot_auto": "Auto (tous les slots chargés)",
+  "settings_auto_leveling": "Mise à niveau auto avant impression",
+  "settings_camera_on_print": "Activer la caméra au démarrage de l'impression",
+  "settings_web_upload_warning": "Afficher un avertissement lors de l'impression de fichiers web",
+  "update_check": "Vérifier les mises à jour",
+  "update_checking": "Vérification…",
+  "update_available": "disponible",
+  "update_none": "Déjà à jour",
+  "update_apply": "Installer maintenant",
+  "update_applying": "Téléchargement…",
+  "update_restarting": "Redémarrage…",
+  "update_error": "Erreur",
+  "btn_connect": "⚡ Connecter",
+  "btn_disconnect": "✕ Déconnecter",
+  "lbl_conn_error": "Erreur de connexion :",
+  "slot_edit_title": "Modifier le slot",
+  "slot_edit_color": "Couleur",
+  "slot_edit_material": "Matériau",
+  "slot_edit_load": "⬇ Charger",
+  "slot_edit_unload": "⬆ Décharger",
+  "slot_edit_save": "💾 Enregistrer",
+  "slot_edit_custom": "ex. PLA, PETG, ABS…",
+  "slot_edit_ok": "Slot AMS",
+  "slot_edit_profile": "Profil OrcaSlicer",
+  "slot_edit_profile_hint": "Envoyé lors de la synchronisation OrcaSlicer comme marque spécifique au lieu de \"Générique\"",
+  "slot_edit_profile_default": "— Générique (défaut) —",
+  "orca_profile_section": "Profils OrcaSlicer",
+  "orca_profile_hint": "Importez vos propres profils de filament OrcaSlicer (ouvrez le dossier utilisateur via Aide → Afficher le dossier de configuration)",
+  "orca_profile_import_btn": "Importer des profils",
+  "orca_profile_import_link": "★ Importer mes profils…",
+  "orca_profile_import_title": "Importer vos profils OrcaSlicer",
+  "orca_profile_help_html": "Déposez un <b>ZIP</b> de votre dossier filament OrcaSlicer ou des fichiers <b>.json</b> individuels.<br>Dans OrcaSlicer : <i>Aide → Afficher le dossier de configuration → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "Déposez ici ou cliquez",
+  "orca_profile_list_label": "Profils importés",
+  "orca_profile_user_label": "Mes profils",
+  "orca_profile_user_empty": "– aucun –",
+  "orca_profile_uploading": "Envoi en cours…",
+  "orca_profile_done": "Importé",
+  "orca_profile_skipped": "ignoré",
+  "log_dir_all": "Tout",
+  "log_lvl_label": "Niveau :",
+  "file_ready_btn": "▶ Lancer l'impression",
+  "file_slots_btn": "🎨 Choisir les slots",
+  "file_cancel_btn": "✕ Annuler",
+  "nav_printers": "Imprimantes",
+  "skip_title": "✂ Ignorer des objets",
+  "skip_hint": "Décochez les objets que vous ne souhaitez plus imprimer :",
+  "skip_btn_label": "Objets",
+  "skip_no_objects": "Aucun objet dans cette impression.",
+  "skip_already": "ignoré",
+  "skip_select_at_least_one": "Veuillez sélectionner au moins un objet.",
+  "skip_sending": "Envoi …",
+  "skip_success": "Les objets seront ignorés.",
+  "fd_objects_hint": "Ignorer des objets (optionnel) :",
+  "fd_objects_toggle": "Ignorer des objets",
+  "fd_slots_hint": "Associer le canal GCode au slot AMS :",
+  "fd_cancel": "Annuler",
+  "fd_print": "▶ Imprimer",
+  "fd_no_slots_msg": "Aucun slot AMS chargé.{br}Lancer l'impression quand même ?",
+  "fd_slot": "Slot",
+  "fd_no_matching_material": "Aucun matériau correspondant",
+  "fd_used": "UTILISÉ",
+  "add_printer": "Ajouter une imprimante",
+  "apd_lbl_ip": "IP de l'imprimante",
+  "apd_lbl_name": "Nom (optionnel)",
+  "apd_placeholder_name": "ex. Kobra X Salon",
+  "apd_cancel": "Annuler",
+  "apd_confirm": "Ajouter",
+  "apd_fetching": "Récupération des données de l'imprimante…",
+  "apd_success": "Imprimante ajoutée, redémarrage du bridge…",
+  "apd_err_ip": "Veuillez saisir une adresse IP",
+  "printers_remove": "Supprimer l'imprimante",
+  "printers_remove_confirm": "Supprimer l'imprimante \"{name}\" ? Le bridge va redémarrer.",
+  "printers_active": "● actif",
+  "printers_switch": "Changer →",
+  "printers_current": "Imprimante actuelle",
+  "printers_loading": "Chargement…",
+  "printers_none": "Aucune imprimante configurée.",
+  "printers_empty_hint": "Aucune imprimante configurée.",
+  "nav_browser": "Navigateur",
+  "panel_browser_title": "Explorateur de fichiers",
+  "store_search_placeholder": "🔍 Rechercher…",
+  "store_empty": "Aucun fichier uploadé.",
+  "store_refresh": "↻ Actualiser",
+  "store_print": "▶ Imprimer",
+  "store_download": "⬇ Télécharger",
+  "store_delete_confirm": "Supprimer le fichier ?",
+  "store_print_confirm": "Imprimer le fichier ?",
+  "store_web_verify_title": "Vérifier le fichier",
+  "store_web_verify_msg": "Veuillez vérifier que ce fichier a été créé pour l'Anycubic Kobra X.",
+  "store_web_verify_confirm": "Confirmer",
+  "store_web_verify_abort": "Annuler",
+  "store_no_results": "Aucun fichier trouvé.",
+  "store_never": "jamais imprimé",
+  "store_estimate": "Estimation",
+  "store_upload_label_prefix": "Déposez un GCode ici ou ",
+  "store_upload_label_browse": "parcourir",
+  "store_upload_busy": "⏳ Envoi en cours…",
+  "store_upload_success": "✓ {file}",
+  "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Seuls les fichiers GCode sont autorisés (.gcode, .3mf, .bgcode)",
+  "sf_all": "Tout",
+  "sf_ok": "✓ Terminés",
+  "sf_err": "✗ Échoués",
+  "sf_new": "Nouveau",
+  "ss_date": "↓ Date",
+  "ss_name": "A–Z Nom",
+  "ss_dur": "⏱ Durée d'impression",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Personnalisé",
+  "fd_options_title": "Options",
+  "print_auto_leveling": "Mise à niveau auto pour cette impression",
+  "settings_file_ready_mode": "Démarrer le dialogue d'impression",
+  "settings_file_ready_banner": "Barre d'impression",
+  "settings_file_ready_dialog": "Dialogue d'impression",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Sens :",
+  "log_lvl_err": "⛔ Erreurs",
+  "log_lvl_warn": "⚠ Avert.",
+  "log_topic_label": "Sujet :",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Impression",
+  "log_topic_info": "Info",
+  "log_topic_status": "Statut",
+  "log_download": "⬇ Télécharger",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Effacer",
+  "log_filter_placeholder": "Filtrer…",
+  "skip_cancel": "Annuler",
+  "skip_confirm": "Ignorer",
+  "settings_integrations": "Intégrations",
+  "modal_sec_spoolman": "Spoolman",
+  "lbl_spoolman_url": "URL du serveur",
+  "lbl_spoolman_sync_rate": "Taux de sync. (s, 0=désact.)",
+  "modal_sec_obico": "Obico"
+}
--- a/web/translations/it.json
+++ b/web/translations/it.json
@@ -0,0 +1,296 @@
+{
+  "header_status_standby": "Pronto",
+  "header_status_printing": "In stampa",
+  "header_status_complete": "Completato",
+  "header_status_error": "Errore",
+  "kobra_free": "Pronto",
+  "kobra_busy": "Occupato",
+  "kobra_printing": "In stampa",
+  "kobra_preheating": "Preriscaldamento",
+  "kobra_auto_leveling": "Livellamento automatico",
+  "kobra_checking": "Verifica",
+  "kobra_updated": "Aggiornamento",
+  "kobra_init": "Inizializzazione",
+  "kobra_pausing": "Pausa in corso...",
+  "kobra_paused": "In pausa",
+  "kobra_resuming": "Ripresa...",
+  "kobra_resumed": "Ripreso",
+  "kobra_stopping": "Arresto...",
+  "kobra_stoped": "Arrestato",
+  "kobra_finished": "Finito",
+  "kobra_failed": "Errore",
+  "kobra_canceled": "Annullato",
+  "kobra_offline": "Offline",
+  "nav_dashboard": "Dashboard",
+  "nav_print": "Stampa",
+  "nav_temps": "Temperature",
+  "nav_motion": "Movimento",
+  "nav_ams": "AMS",
+  "nav_extras": "Luce / Ventola",
+  "nav_console": "Console",
+  "card_progress": "Avanzamento",
+  "card_temps": "Temperature",
+  "card_light_fan": "Ventola",
+  "card_speed": "Velocità di stampa",
+  "card_cam": "Camera",
+  "lbl_elapsed": "Trascorso:",
+  "lbl_remaining": "Rimanente:",
+  "lbl_slicer_time": "Stima slicer:",
+  "lbl_layers": "Layer",
+  "lbl_zpos": "Z (mm)",
+  "speed_silent": "🐢 Silenzioso",
+  "speed_normal": "⚡ Normale",
+  "speed_sport": "🚀 Sport",
+  "lbl_light": "💡 Luce",
+  "lbl_feed": "Carica",
+  "lbl_unload": "Rimuovi",
+  "card_ace_dry": "Essiccazione ACE",
+  "ace_dry_dryer": "Essiccatore",
+  "ace_dry_status_off": "Stato: Spento",
+  "ace_dry_status_on": "Stato: Attivo",
+  "ace_dry_status_remaining": "Rimanente",
+  "ace_dry_humidity": "Umidità",
+  "ace_dry_current_temp": "Temperatura",
+  "ace_dry_chart": "Cronologia (Temp/Umidità)",
+  "ace_dry_temp": "Temperatura (°C)",
+  "ace_dry_duration": "Durata (min)",
+  "ace_dry_start": "▶ Avvia",
+  "ace_dry_stop": "■ Ferma",
+  "ace_dry_auto_refill": "Ricarica automatica",
+  "ace_dry_enable": "Abilita essiccazione",
+  "ace_dry_temp_line": "Temperatura di essiccazione",
+  "ace_dry_time_line": "Tempo di essiccazione",
+  "ace_dry_ui_pending": "(Solo interfaccia, backend a seguire)",
+  "ace_dry_dialog_title": "Impostazioni Temp/Tempo essiccatore",
+  "ace_dry_dialog_temp": "Temperatura (30-80°C)",
+  "ace_dry_dialog_time": "Tempo rim. (h:m:s)",
+  "ace_dry_dialog_confirm": "Conferma",
+  "ace_dry_dialog_cancel": "Annulla",
+  "ace_dry_dialog_save_restart": "Salva e riavvia",
+  "ace_dry_dialog_custom_name": "Nome personalizzato",
+  "ace_dry_dialog_reset_default": "Ripristina predefiniti",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "Personalizzato",
+  "cam_placeholder": "📷 Camera non avviata",
+  "cam_stream_unavailable": "Flusso video non disponibile",
+  "btn_cam_start": "▶ Camera",
+  "btn_cam_stop": "◼ Camera",
+  "btn_pause": "⏸ Pausa",
+  "btn_resume": "▶ Riprendi",
+  "btn_cancel": "✕ Stop",
+  "label_nozzle": "Ugello",
+  "label_bed": "Piatto",
+  "label_fan": "🌀 Ventola",
+  "label_light": "💡 Luce",
+  "label_on_off": "On / Off",
+  "label_speed": "Velocità",
+  "panel_print_title": "Controllo stampa",
+  "panel_print_btn_pause": "⏸ Pausa",
+  "panel_print_btn_resume": "▶ Riprendi",
+  "panel_print_btn_cancel": "✕ Annulla",
+  "panel_print_temps_live": "Temperature (In tempo reale)",
+  "label_set": "Imposta",
+  "label_off": "Off",
+  "panel_temps_nozzle": "Ugello",
+  "panel_temps_bed": "Piatto riscaldato",
+  "panel_temps_chart": "Cronologia (ultime 60 letture)",
+  "label_target_c": "Target:",
+  "panel_motion_xy": "Assi XY",
+  "panel_motion_z": "Asse Z",
+  "label_step": "Ampiezza passo:",
+  "btn_home_z": "Home Z",
+  "btn_home_xy": "Home XY",
+  "btn_home_all": "Home generale",
+  "btn_disable_motors": "Spegni motori",
+  "panel_ams_title": "Filamento",
+  "card_ams": "Filamento",
+  "ams_no_data": "Nessun dato ricevuto dall' AMS",
+  "label_slot": "Slot",
+  "ams_empty": "Vuoto",
+  "panel_extras_light": "Luce",
+  "panel_extras_fan": "Ventola",
+  "panel_extras_camera": "Camera",
+  "btn_cam_start2": "▶ Avvia",
+  "btn_cam_stop2": "◼ Ferma",
+  "panel_console_title": "Registro eventi",
+  "log_light_on": "Luce accesa",
+  "log_light_off": "Luce spenta",
+  "log_fan": "Ventola →",
+  "log_nozzle": "Ugello →",
+  "log_bed": "Piatto →",
+  "log_axis": "Asse",
+  "log_home": "Home",
+  "log_home_all": "Home generale",
+  "log_cam_start": "Camera avviata:",
+  "log_cam_stop": "Camera arrestata",
+  "log_poll_error": "Errore di sincronizzazione:",
+  "log_error": "Errore:",
+  "confirm_cancel": "Annullare davvero la stampa?",
+  "settings_title": "Impostazioni",
+  "settings_connection": "Connessione",
+  "settings_print": "Impostazioni di stampa",
+  "settings_poll": "Intervallo di sincronizzazione (secondi)",
+  "nav_settings": "Impostazioni",
+  "settings_cat_display": "Aspetto",
+  "settings_cat_filament": "Filamento",
+  "settings_cat_language": "Lingua",
+  "settings_cat_theme": "Alterna chiaro / scuro",
+  "settings_filament_mapping": "Mappatura profilo filamento (per slot)",
+  "settings_filament_mapping_save": "Salva mappatura",
+  "settings_visible_vendors": "Produttori visibili (menu del profilo)",
+  "settings_visible_vendors_hint": "Solo questi produttori appariranno nel menu del profilo dello slot. Se non selezioni nulla = mostra tutti. I profili \"Generici\" e i tuoi personali sono sempre visibili.",
+  "settings_visible_vendors_save": "Salva selezione",
+  "progress_action_print": "Stampa",
+  "progress_action_slots": "Mappa slot",
+  "progress_action_clear": "Cancella",
+  "settings_version": "Versione",
+  "settings_save": "Salva e riavvia",
+  "settings_printer_name": "Nome stampante",
+  "settings_printer_ip": "IP stampante",
+  "settings_mqtt_port": "Porta MQTT",
+  "settings_username": "Nome utente MQTT",
+  "settings_password": "Password MQTT",
+  "settings_device_id": "ID dispositivo",
+  "settings_mode_id": "ID modalità",
+  "hint_ip_no_port": "Solo indirizzo IP, senza porta (es. 192.168.1.102)",
+  "settings_default_slot": "Slot predefinito (colore singolo)",
+  "settings_slot_auto": "Auto (tutti gli slot caricati)",
+  "settings_auto_leveling": "Livellamento automatico predefinito",
+  "fd_options_title": "Opzioni di stampa",
+  "print_auto_leveling": "Livellamento automatico",
+  "settings_file_ready_mode": "Comportamento all'avvio stampa",
+  "settings_file_ready_banner": "Barra di stampa",
+  "settings_file_ready_dialog": "Finestra di dialogo di stampa",
+  "settings_camera_on_print": "Attiva la camera all'avvio della stampa",
+  "settings_web_upload_warning": "Mostra un avviso quando si stampano caricamenti web",
+  "update_check": "Controlla aggiornamenti",
+  "update_checking": "Verifica in corso...",
+  "update_available": "disponibile",
+  "update_none": "Già aggiornato",
+  "update_apply": "Installa ora",
+  "update_applying": "Download in corso...",
+  "update_restarting": "Riavvio in corso...",
+  "update_error": "Errore",
+  "btn_connect": "⚡ Connetti",
+  "btn_disconnect": "✕ Disconnetti",
+  "lbl_conn_error": "Errore di connessione:",
+  "slot_edit_title": "Modifica slot",
+  "slot_edit_color": "Colore",
+  "slot_edit_material": "Materiale",
+  "slot_edit_load": "⬇ Carica",
+  "slot_edit_unload": "⬆ Rimuovi",
+  "slot_edit_save": "💾 Salva",
+  "slot_edit_custom": "es. PLA, PETG, ABS…",
+  "slot_edit_ok": "Slot AMS",
+  "slot_edit_profile": "Profilo OrcaSlicer",
+  "slot_edit_profile_hint": "Inviato durante la sincronizzazione con OrcaSlicer come marchio specifico invece di un semplice \"Generico\"",
+  "slot_edit_profile_default": "— Generico (predefinito) —",
+  "orca_profile_section": "Profili OrcaSlicer",
+  "orca_profile_hint": "Importa i tuoi profili di filamento OrcaSlicer (apri la cartella utente tramite Aiuto → Mostra cartella di configurazione)",
+  "orca_profile_import_btn": "Importa profili",
+  "orca_profile_import_link": "★ Importa i tuoi profili…",
+  "orca_profile_import_title": "Importa i tuoi profili OrcaSlicer",
+  "orca_profile_help_html": "Carica un file <b>ZIP</b> della tua cartella filamenti di OrcaSlicer o file singoli <b>.json</b>.<br>In OrcaSlicer: <i>Aiuto → Mostra cartella di configurazione → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "Trascina qui o fai clic",
+  "orca_profile_list_label": "Attualmente importati",
+  "orca_profile_user_label": "Profili personali",
+  "orca_profile_user_empty": "– nessuno –",
+  "orca_profile_uploading": "Caricamento in corso…",
+  "orca_profile_done": "Importato",
+  "orca_profile_skipped": "saltato",
+  "log_dir_all": "Tutti",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "Dir:",
+  "log_lvl_label": "Livello:",
+  "log_lvl_err": "⛔ Errori",
+  "log_lvl_warn": "⚠ Avvisi",
+  "log_topic_label": "Argomento:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "Stampa",
+  "log_topic_info": "Info",
+  "log_topic_status": "Stato",
+  "log_download": "⬇ Scarica",
+  "log_auto": "⬇ Auto",
+  "log_clear": "✕ Cancella",
+  "log_filter_placeholder": "Filtra…",
+  "file_ready_btn": "▶ Avvia stampa",
+  "file_slots_btn": "🎨 Seleziona slot",
+  "file_cancel_btn": "✕ Annulla",
+  "nav_printers": "Stampanti",
+  "skip_title": "✂ Salta oggetti",
+  "skip_hint": "Deseleziona gli oggetti che non vuoi più stampare:",
+  "skip_btn_label": "Oggetti",
+  "skip_no_objects": "Nessun oggetto in questa stampa.",
+  "skip_already": "saltato",
+  "skip_cancel": "Annulla",
+  "skip_confirm": "Salta",
+  "skip_select_at_least_one": "Seleziona almeno un oggetto.",
+  "skip_sending": "Invio in corso …",
+  "skip_success": "Gli oggetti verranno saltati.",
+  "fd_objects_hint": "Salta oggetti (opzionale):",
+  "fd_objects_toggle": "Salta oggetti",
+  "fd_slots_hint": "Assegna il canale GCode allo slot AMS:",
+  "fd_cancel": "Annulla",
+  "fd_print": "▶ Stampa",
+  "fd_no_slots_msg": "Nessuno slot AMS caricato.{br}Avviare comunque la stampa?",
+  "fd_slot": "Slot",
+  "fd_no_matching_material": "Nessun materiale corrispondente",
+  "fd_used": "USATO",
+  "add_printer": "Aggiungi stampante",
+  "apd_lbl_ip": "IP stampante",
+  "apd_lbl_name": "Nome (opzionale)",
+  "apd_placeholder_name": "es. Kobra X Soggiorno",
+  "apd_cancel": "Annulla",
+  "apd_confirm": "Aggiungi",
+  "apd_fetching": "Recupero dati dalla stampante…",
+  "apd_success": "Stampante aggiunta, riavvio del bridge in corso…",
+  "apd_err_ip": "Inserisci un indirizzo IP",
+  "printers_remove": "Rimuovi stampante",
+  "printers_remove_confirm": "Rimuovere la stampante \"{name}\"? Il bridge si riavvierà.",
+  "printers_active": "● attiva",
+  "printers_switch": "Cambia →",
+  "printers_current": "Stampante corrente",
+  "printers_loading": "Caricamento in corso…",
+  "printers_none": "Nessuna stampante configurata.",
+  "printers_empty_hint": "Nessuna stampante ancora configurata.",
+  "nav_browser": "Browser",
+  "panel_browser_title": "Browser dei file",
+  "store_search_placeholder": "🔍 Cerca…",
+  "store_empty": "Nessun file caricato.",
+  "store_refresh": "↻ Aggiorna",
+  "store_print": "▶ Stampa",
+  "store_download": "⬇ Scarica",
+  "store_delete_confirm": "Eliminare il file?",
+  "store_print_confirm": "Stampare il file?",
+  "store_web_verify_title": "Verifica file",
+  "store_web_verify_msg": "Verifica che questo file sia stato creato per Anycubic Kobra X.",
+  "store_web_verify_confirm": "Conferma",
+  "store_web_verify_abort": "Interrompi",
+  "store_no_results": "Nessun file trovato.",
+  "store_never": "mai stampato",
+  "store_estimate": "Stima",
+  "store_upload_label_prefix": "Trascina il GCode qui o ",
+  "store_upload_label_browse": "sfoglia",
+  "store_upload_busy": "⏳ Caricamento in corso…",
+  "store_upload_success": "✓ {file}",
+  "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ Sono consentiti solo file GCode (.gcode, .3mf, .bgcode)",
+  "sf_all": "Tutti",
+  "sf_ok": "✓ Completato",
+  "sf_err": "✗ Fallito",
+  "sf_new": "Nuovo",
+  "ss_date": "↓ Data",
+  "ss_name": "Nome A–Z",
+  "ss_dur": "⏱ Tempo di stampa",
+  "settings_integrations": "Integrazioni",
+  "modal_sec_spoolman": "Spoolman",
+  "lbl_spoolman_url": "URL server",
+  "lbl_spoolman_sync_rate": "Frequenza sync (s, 0=disatt.)",
+  "modal_sec_obico": "Obico"
+}
--- a/web/translations/zh-cn.json
+++ b/web/translations/zh-cn.json
@@ -37,6 +37,7 @@
  "lbl_remaining": "剩余时间:",
  "lbl_slicer_time": "切片预估:",
  "lbl_layers": "层",
+  "lbl_zpos": "Z (mm)",
  "speed_silent": "🐢 静音",
  "speed_normal": "⚡ 标准",
  "speed_sport": "🚀 运动",
@@ -126,7 +127,20 @@
  "settings_title": "设置",
  "settings_connection": "连接",
  "settings_print": "打印设置",
-  "settings_poll": "轮询间隔",
+  "settings_poll": "轮询间隔（秒）",
+  "nav_settings": "设置",
+  "settings_cat_display": "外观",
+  "settings_cat_filament": "耗材",
+  "settings_cat_language": "语言",
+  "settings_cat_theme": "切换浅色 / 深色",
+  "settings_filament_mapping": "耗材配置映射（每槽位）",
+  "settings_filament_mapping_save": "保存映射",
+  "settings_visible_vendors": "可见厂商（配置下拉框）",
+  "settings_visible_vendors_hint": "仅这些厂商会出现在槽位配置下拉框中。未选择 = 显示全部。“Generic”和您自己的配置始终可见。",
+  "settings_visible_vendors_save": "保存选择",
+  "progress_action_print": "打印",
+  "progress_action_slots": "分配槽位",
+  "progress_action_clear": "清除",
  "settings_version": "版本",
  "settings_save": "保存并重启",
  "settings_printer_name": "打印机名称",
@@ -192,6 +206,7 @@
  "skip_sending": "发送中 …",
  "skip_success": "对象将被跳过。",
  "fd_objects_hint": "跳过对象 (可选):",
+  "fd_objects_toggle": "跳过对象",
  "fd_slots_hint": "将 GCode 通道分配到 AMS 槽位:",
  "fd_cancel": "取消",
  "fd_print": "▶ 打印",
@@ -237,11 +252,45 @@
  "store_upload_busy": "⏳ 上传中…",
  "store_upload_success": "✓ {file}",
  "store_upload_error": "✗ {error}",
+  "store_upload_only_gcode": "✗ 仅允许 GCode 文件 (.gcode, .3mf, .bgcode)",
  "sf_all": "全部",
  "sf_ok": "✓ 已完成",
  "sf_err": "✗ 失败",
  "sf_new": "新",
  "ss_date": "↓ 日期",
  "ss_name": "A–Z 名称",
-  "ss_dur": "⏱ 打印时间"
-}
+  "ss_dur": "⏱ 打印时间",
+  "ace_dry_preset_pla": "PLA",
+  "ace_dry_preset_pla_plus": "PLA+",
+  "ace_dry_preset_petg": "PETG",
+  "ace_dry_preset_tpu": "TPU",
+  "ace_dry_preset_abs_asa": "ABS / ASA",
+  "ace_dry_preset_pa_pc": "PA / PC",
+  "ace_dry_preset_custom": "自定义",
+  "fd_options_title": "选项",
+  "print_auto_leveling": "本次打印自动调平",
+  "settings_file_ready_mode": "开始打印对话框",
+  "settings_file_ready_banner": "打印栏",
+  "settings_file_ready_dialog": "打印对话框",
+  "log_dir_rx": "RX",
+  "log_dir_tx": "TX",
+  "log_dir_label": "方向:",
+  "log_lvl_err": "⛔ 错误",
+  "log_lvl_warn": "⚠ 警告",
+  "log_topic_label": "主题:",
+  "log_topic_ams": "AMS",
+  "log_topic_print": "打印",
+  "log_topic_info": "信息",
+  "log_topic_status": "状态",
+  "log_download": "⬇ 下载",
+  "log_auto": "⬇ 自动",
+  "log_clear": "✕ 清空",
+  "log_filter_placeholder": "筛选…",
+  "skip_cancel": "取消",
+  "skip_confirm": "跳过",
+  "settings_integrations": "集成",
+  "modal_sec_spoolman": "Spoolman",
+  "lbl_spoolman_url": "服务器地址",
+  "lbl_spoolman_sync_rate": "同步频率（秒，0=关闭）",
+  "modal_sec_obico": "Obico"
+}
Author	SHA1	Message	Date
viewit	326453e2fd	README.md aktualisiert All checks were successful Nightly Build / build (push) Successful in 6m8s Details	2026-06-24 14:29:15 +02:00
viewit	ffd8ed09d5	README.es.md aktualisiert Some checks failed Nightly Build / build (push) Has been cancelled Details	2026-06-24 14:28:52 +02:00
viewit	dc7e92688b	README.de.md aktualisiert Some checks failed Nightly Build / build (push) Has been cancelled Details	2026-06-24 14:28:22 +02:00
viewit	3e1ba9df4b	docs: Wartungshinweis + CONTRIBUTING.md Link in README.es.md All checks were successful Nightly Build / build (push) Successful in 6m2s Details	2026-06-24 13:39:31 +02:00
viewit	41f4700b24	docs: Wartungshinweis + CONTRIBUTING.md Link in README (DE+EN) Some checks failed Nightly Build / build (push) Has been cancelled Details	2026-06-24 13:38:23 +02:00
viewit	216b2de2c0	fix: pull_request_template.md ins Root-Verzeichnis (Gitea-Anforderung) Some checks failed Nightly Build / build (push) Has been cancelled Details	2026-06-24 13:35:48 +02:00
viewit	394b0e69ab	docs: CONTRIBUTING.md hinzufügen (Fork-Flow, Branch-Modell, Commit-Stil) Some checks failed Nightly Build / build (push) Has been cancelled Details	2026-06-24 13:32:47 +02:00
viewit	877cddb1ba	chore: Repo-Struktur vollständig aufsetzen All checks were successful Nightly Build / build (push) Successful in 6m0s Details - Workflows: docker-publish.yml → nightly.yml + release.yml + pr-check.yml (nightly: Branch-Push + Cron 02:00, release: v*-Tag, pr-check: lint+tests) - Issue-Templates: bug_report.md + feature_request.md (englisch) - PR-Template: pull_request_template.md (englisch) - Claude-Agenten: reviewer, changelog, test-writer, nightly-prep, docker-check, moonraker-debug + settings.json - agents.md: Agenten-Übersicht im Repo-Root - .gitignore: .runner-token + secrets/ ausgeschlossen	2026-06-24 13:21:29 +02:00
viewit	c9043e9630	ci: nightly-Datum-Tag hinzufügen (nightly-YYYYMMDD) All checks were successful Docker Publish / build-push (push) Successful in 6m13s Details	2026-06-24 13:10:55 +02:00
viewit	6165a7f62a	ci: retrigger workflow test Some checks failed Docker Publish / build-push (push) Failing after 11s Details	2026-06-24 13:09:26 +02:00
viewit	fa8e0c1491	ci: test workflow trigger auf nightly-Branch Some checks failed Docker Publish / build-push (push) Failing after 12s Details	2026-06-24 13:08:49 +02:00
viewit	282c02ae0a	chore: .runner-token zu .gitignore hinzufügen Some checks failed Docker Publish / build-push (push) Failing after 11s Details	2026-06-24 13:01:46 +02:00
viewit	72f77d92af	feat: Integrationen-Tab + KobraX Full Stack Compose + CI-Workflow Some checks failed Docker Publish / build-push (push) Failing after 13s Details - Settings-Tab "Integrationen": Spoolman URL/Sync-Rate konfigurierbar, Obico Read-only Hinweis auf moonraker-obico.cfg - docker-compose-KX.yml: Portainer-kompatibler Full Stack (KX-Bridge + Obico Self-Hosted + Spoolman + moonraker-obico Plugin) - moonraker-obico.cfg.example: Verbindungsvorlage für Obico-Integration - .gitea/workflows/docker-publish.yml: Push auf nightly → :nightly Image, v*-Tag → :latest + :<VERSION>	2026-06-24 12:58:46 +02:00
viewit	3595cf839c	fix: Bind-Mounts auf /mnt/dockerdata/kx-nightly	2026-06-23 15:18:18 +02:00
viewit	2b39cc1a78	feat: Portainer-Nightly-Stack (docker-compose.portainer-nightly.yml)	2026-06-23 15:15:20 +02:00
viewit	d20308cf2c	nightly: 0.9.27-nightly1	2026-06-23 15:05:40 +02:00
viewit	710c4831c2	feat: Nightly-Build-Support (docker-compose.nightly.yml + README)	2026-06-23 14:55:03 +02:00
viewit	5bff7adad0	build: sources for v0.9.26	2026-06-21 21:46:38 +02:00
viewit	eea570052f	build: sources for v0.9.25	2026-06-17 07:15:31 +02:00
viewit	303297bfbf	build: sources for v0.9.24	2026-06-16 21:45:34 +02:00
viewit	6b9ad9d426	build: sources for v0.9.23	2026-06-16 15:15:47 +02:00
viewit	ed30568092	build: sources for v0.9.22	2026-06-16 13:12:04 +02:00
viewit	1f300589d1	build: sources for v0.9.21	2026-06-14 11:00:32 +02:00
viewit	930e3774af	docs: Portainer-Deployment-Anleitung + docker-compose.portainer.yml Named-Volume-Compose ohne ENV-Pflichtfelder — Bridge startet im Offline-Modus, User trägt Drucker-IP in der UI ein.	2026-06-13 00:01:07 +02:00
viewit	636889bdbc	docs: Filament-Preset-Anleitung als docs/filament-preset-bridge-guide.md hinzugefügt + README-Links aktualisiert	2026-06-09 12:41:23 +02:00
viewit	3f6ea269e6	build: sources for v0.9.20	2026-06-08 23:14:50 +02:00
viewit	3fff6e25f0	docs(readme): explicit warning that standalone binaries need anycubic_slicer.crt + .key next to the executable (from anycubic-certs.zip)	2026-06-04 20:34:41 +02:00